THERMEC '2003 : International Conference on Processing & Manufacturing of Advanced Materials, July 7-11, 2003, Leganés, Madrid, Spain

Author(s)

• International Conference on Processing and Manufacturing of Advanced Materials
• Chandra, T.

Bibliographic Information

THERMEC '2003 : International Conference on Processing & Manufacturing of Advanced Materials, July 7-11, 2003, Leganés, Madrid, Spain

editors, T.Chandra, Jose M. Torralba and T. Sakai

（Materials science forum, v. 426-432）

Transtech Publications, c2003

• : set
• pt. 1
• pt. 2
• pt. 3
• pt. 4
• pt. 5

Note

Includes index

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). This 5-volume set comprises the Proceedings of the 4th International Conference on Processing and Manufacturing of Advanced Materials, "THERMEC2003", held from July 7-11, 2003 at the Universidad Carlos III de Madrid, Leganes, Spain, under the co-sponsorship of The Minerals, Metals & Materials Society (TMS), USA.

Table of Contents

• Mechanical Properties of Metastable Alloys with Novel Atomic Configurations Obtained by Use of Stabilization of Supercooled Liquid Mechanical Property - Microstructure Relations in Iron-Carbon Alloys from 1.0 to 5.2% Carbon Microstructure and Mechanical Property of Ultra-Fine (Ferrite + Cementite) Duplex Structure in High Carbon Steel Hybrid Modelling Methodology Applied to Microstructural Evolution during Hot Deformation of Aluminium Alloys Advances in the Kinetic Theory of Carbide Precipitation Control of Microstructure in TRIP Steels by Niobium New Challenges in the Thermomechanical Processing of HSLA Steels The Critical Strain for Dynamic Recrystallization in Rolling Mills Strength and Fracture of Aluminium Alloys Properties and Microstructures of a High-Performance Thermoelectric Intermetallic Compound - -Zn4Sb3 Recrystallization Texture of (123)[-6-3 4] Copper Single Crystal Cold Rolled up to 99.5% Recent Developments in the Design and Processing of Gamma-Based Titanium Aluminide Alloys Texture, Microstructure and Forming of Aluminium Alloy Sheets Alloy Development and Associated Dimensional Changes of Aluminium Alloys during Liquid Phase Sintering New Material Systems and Manufacturing Techniques for High Strength Sintered Precision Parts Functionally Graded Materials Produced with High Power Lasers Solid State Joining as a Method for Producing Large Scale Billets from Microcrystalline Materials Multifunctional Coating Design for High-Temperature Materials Some Recent Work on Alloy and Process Development of Ti and TiAl-Based Alloys New Development in Magnesium Technology for Light Weight Structures in Transportation Industries High Nitrogen Steel and Interstitial Alloying Composites on the Way to Structural Automotive Applications Third-Generation Gene-Activating Biomaterials Thermomechanical Control in Aluminium Sheet Production Life Cycle Assessment of Coating Treatments for Automotive Magnesium Parts The Developing Prospect of Air-Cooled Bainitic Steels Pt and Hf Additions to NiAl Bond Coats and their Effect on the Lifetime of Thermal Barrier Coatings Limit of Dislocation Density and Ultra-Grain-Refining on Severe Deformation in Iron Mechanical Properties of IF Steel Produced by Thin Slab Casting and Direct Hot Rolling Process Friction Stir Welding - Recent Developments Recent Developments of SPD Processing for Fabrication of Bulk Nanostructured Materials Phase Formation Sequence Map for Al-Ni-Gd Glass-Forming System Devitrified at 250 DegreesC Ti-Ni-Based Shape Memory Alloys as Smart Materials Creep Data Prediction for Aluminium Airframe Alloys Forging Studies with Severe Plastic Deformation Processed Aluminum Alloy 6061 An EBSD Study of Sub-Grain Structure Development in Hot Deformed Al-1%Mn Crystals The Characterization of the Plastic Potential of Aluminum Alloys Using Internal Variables of Strain Rate Sensitivity, Mean Slip Distance and Mean Slip Velocity Effects of Strain Rate on Deformation Behavior of A6061-T6 Aluminum Alloy The Interaction between Precipitation and Recrystallization during Annealing of Cold Rolled AA6111 Removal of Porosity in Cast Aluminium Alloys by Equal Channel Angular Extrusion Development of Properties during Secondary Ageing of Aluminium Alloys The Strengthening and Microstructure of Precipitation Hardened Al-Li-Cu Alloys Ultrasonic Welding of Aluminum-Magnesium Alloy Temperature Effect on Microstructure Development in 7475 Aluminum Alloy during ECAP Improved Material Properties for Cast Aluminium Alloys: From the Processes to Life Prediction Modelling Phase Separation Structure Near the Surface in Al-Ag Binary Alloys The Effect of Alloying Elements on the Microstructure and Mechanical Properties of Al-12Si Cast Alloys Environmental Embrittlement of Al-Zn-Mg-Cu Alloys with Cr or Zr Computer-Aided Optimization of Aluminum Alloys for Airframe Applications Precipitation Sequence of Al-Mg-Si Alloys Microstructure and Plastic Anisotropy in Rolled Al-Mg Alloys Anomalous Tensile Stability for an Aluminum Alloy at High Temperatures and High Strain Rates Interpreted from a Dislocation Dynamic View Point Effect of Addition of Cu on Structures of Metastable Phases in Al-Mg-Si Alloys Grain Refinement in As-Cast 7475 Al Alloy under Hot Multiaxial Deformation The Obtention of Homogeneous Microstructures in Al-Sn-Based Tribological Alloys Damage Behaviours of Various Coarse Al-Fe-Si Particles in Model Wrought Alloys Lattice Rotations at Large Second-Phase Particles in Polycrystalline Aluminium Quantitative Analysis of Structure-Strength Relation of Commercial Purity Aluminium Deformed by Accumulative Roll Bonding and Annealed at Low Temperature Development of High Damping Aluminum Alloys and Composites Using Rapidly Solidified Powder Metallurgy Process Processing and Characterization of Porous Aluminum Precipitation Hardenable Al-Mg-Cu Alloys: Mechanical Properties and Hardening Mechanisms Microstructures and Workability of Spray-Formed and Cast AZ91 Mg Alloys Quenching and Cold-Work Residual Stresses in Aluminum Hand Forgings: Contour Method Measurement and FEM Prediction Compressive Behavior and Energy Absorption of Constructed Cellular Aluminum Effect of the Homogenisation Conditions on the Extrudability and High Temperature Fracture Resistance of AA6063 Aluminium Alloy Work Hardening in Metals: Microscopic and Macroscopic Behavior through a Wide Range of Strain Light Alloys Innovation in Australia Study of the Crack Sensitivity of 6xxx and 7xxx Aluminum Alloys The Effect of Si Additions on the Nucleation of in Al-Cu-Mg Alloys Semisolid Strip Casting Using a Vertical Type Twin Roll Caster In-Situ, Laser-Ultrasonic Monitoring of the Recrystallization of Aluminum Alloys Development of New Aluminium Alloys for Semisolid Processing Thermal Behaviour of Hot Extruded Aluminium with Copper Phosphorus Additions The Pinning of Grain Boundaries during the Recrystallization of an Al-0.3Mn-0.15Si Alloy Semi-Solid Extrusion of Al-10%Mg Alloy with a Non-Dendritic Structure Hot Working Microstructure Map for Magnesium AZ31 Investigation of Corrosion Behaviour of Magnesium Alloy AM60B-F under Pseudo-Physiological Conditions Grain Refinement of Magnesium Alloy AZ91D Cast in Permanent Mold Using Mechanical Vibrations Challenges in Lost Foam Casting of AZ91 Alloy The Influence of Procedure Parameters on the Characters of Semi-Solid AZ91 Magnesium Alloy Development of Plasticity Processing of Magnesium Alloys Optimisation of Mechanical Properties of an AZ 91 Alloy by Microstructure Control Deformation Behavior and Forging of Magnesium Wrought Alloy Microstructure and Mechanical Properties of Hot-Extruded AZ31 Powders Current Status and Manufacturing Technologies of Magnesium Alloy Parts in Japanese Home Electronics Mechanical Alloying of Powder Mixture of Magnesium Alloy Chips and Aluminum Microstructure of Anodic Films Grown on Magnesium-Lithium-Yttrium Ultra Light Alloy Simulation of Mg Sheet Press Cell Materials Creep Behavior and Deformation Substructure of Mg-Y Alloys Containing Dilute Content of Zinc Atomic Size Effects on Al, Ca and Sc in Mg Solid Solutions from First-Principles Calculations The Effect of Temperature and Flow Stress for Climb-Controlled Dislocation Creep in Magnesium Alloy Initial Grain Size Effect of Dynamic Recrystallization of Magnesium Alloy AZ31 Mechanical Properties of Magnesium Alloy Sheets Produced by Semi-Solid Roll Strip Casting Expendable Pattern Casting of AZ91D Magnesium Alloy Hydrostatic Extrusion of Magnesium: Process Mechanics and Performance Microstructural Evolution during Hot Rolling of an AZ31 Mg Alloy Titanium Airframe Applications: Brief History, Present Applications and Future Trends Effect of Cu-Ni Plasma Coating on Fretting Fatigue Characteristics of Ti-6Al-4V under Flat-on-Flat Contact Dynamic Recovery and Recrystallization in Beta-Titanium Alloys Control of Mechanical Properties of Ti-Fe-O-N Based Titanium Alloys by Thermomechanical Processing Effect of Microstructures on Mechanical Properties of Heat Resistant Titanium Alloys at Elevated Temperatures Ultra-Fine Grain Refinement, Superplasticity and its Application of Titanium Alloys Obtained through Protium Treatment Multi Functional Titanium Alloy ''GUM METAL'' High Temperature Deformation Behavior of Ti-6Al-4V Alloy with Widmanstaten Microstructure Research on Microstructure and Mechanical Properties of Laser Direct Deposited Ti-6Al-4V Alloy Effect of Cold Rolling on the Annealing Texture of a Near- Titanium Study on Microstructure and Mechanical Properties of an Orthorhombic Ti-Al-Nb-Ta Alloy A New Alpha-Beta Alloy, Ti-4.5Al-4Cr-0.5Fe-0.2C, Solution Hardened by Ultra High Content of Carbon Deformation Behavior and Microstructure Evolutions in Ti-6Al-4V Extrusion Creep Behaviour at 760 DegreesC of Two Nickel-Based Single Crystal Superalloys Microstructural Influences on Notch Fatigue Crack Initiation and Propagation in a Range of Nickel Base Superalloys Change in Shape of Creep Curves of Single Phase Ni-20mass%Cr Single Crystals with Decreasing Stress Modeling and Investigation of Dynamic Recrystallisation in Nickel-Based Superalloys Microstructural Changes in a Ni-Based Super-Alloy Induced by Thermal Treatment Small-Angle Neutron Scattering: A Tool for Microstructural Investigation of High-Temperature Materials The Effect of Cold Rolling on the Grain Boundary Character and Creep Rupture Properties of INCONEL Alloy 718 ' Precipitation Kinetics in P/M IN100 An Investigation on Electromagnetic Shaping and Solidification Behavior of Superalloys under Vacuum Environment Mirco-Mechanisms Involved in Rafts of Crept MC2 Nickel-Based Single Crystal Superalloy Creep of [011]-Oriented Ni-20mass%Cr Single Crystals Microstructural Evolutions of Superalloy 718 during Dynamic and Metadynamic Recrystallizations Characterisation and Modelling of Crystal Rotations during Multiaxial Creep in Single Crystal Superalloys Low-Stress Creep of Ni-20mass%Cr Single Crystals with [001] Orientation Microstructure Analysis and Modeling of Ingot to Billet Conversion in Alloy 718 Morphology of ' Precipitates in Experimental W- and Re- Containing Ni-Base Superalloys Misfit Investigations of Nickel-Base Superalloys High Strength Galvanized Wire for Bridge Cables Microstructural Elements and Fracture of Hardened High-Carbon Steels High Strain Rate - High Strain Response of an Ultrahigh Carbon Steel Containing 1.3% C and 3% Si Fracture Behavior of an Ultrahigh Carbon Steel Containing 1.3%C as Influenced by Microstructure and Testing Conditions Stress-Strain Rate Relations in Ultrahigh Carbon Steels Deformed in the Ferrite Range of Temperature Mechanical Properties of Cementite and Fabrication of Artificial Pearlite Hot Deformation of Hypereutectoid Steels Mechanical Properties of In-Situ Laminated Composites Based on Ultrahigh Carbon Steels Superplastic Densification of Ultrahigh Carbon Steel Powder Compacts Innovative Ultrahigh Carbon Steel Laminates with Outstanding Mechanical Properties Suppression of Secondary Ferrite Formation by Boron Addition in High Carbon Steel Wires Particulate Composites of White Cast Iron Transformation Behavior of Carbon-Unsaturated and Super-Cooled Austenite in a High Carbon Alloy Steel Research Structure Forming and Formation of Physical-Mechanical Properties at Thermoplastic Processing of Spheroidal Graphite Cast Iron A Novel Processing of Austempered Ductile Cast Iron (ADI) Superplastic Ultra-High Carbon Steels Processed by Spray Forming Influence of Heat Treatment on Fatigue Behavior of a Cu-Ni Alloyed Austempered Ductile Iron Characterizing Alloy Additions to High Nitrogen Steels Nitrogen-Alloyed Austenitic Stainless Steels for Wire and Cable Applications Nitrogen and Carbon in Austenitic and Martensitic Steels: Atomic Interactions and Structural Stability Effects of Nitrogen on the Deformation Behavior of Duplex Stainless Steel Thermodynamics of Nitrogen Absorption into Solid Solution in Fe-Cr-Mn Ternary Alloys The Dependence of Activity Coefficient on Intensive Thermodynamic Parameters in a Liquid Fe-N-V Alloy Thermomechanical Treatment of Nitrogen-Containing Corrosion Resistant Steels: Various Structure Classes The Effect of Grain Size on the Mechanical and Cavitation Resistance of a High Nitrogen and Low Nickel Austenitic Stainless Steel Cycle Precipitation of Fe16N2 in Nitrided Iron Alloys Thermomechanical Strengthening of Nitrogen-Bearing Austenitic Stainless Steels Microstructural Evolution of Sulfide in Fe-Cr-S Alloys A Finite Element-Based Integrated Process Model for the Prediction of Thermo-Mechanical and Metallurgical Behavior of Stainless Steel in Cold Strip Rolling Evolution of Grain Boundaries and Subboundaries in Stainless Steel during Dynamic Recrystallization Modelling Primary Recrystallization and Grain Growth in the AISI 316 Stainless Steel Influence of Wire Electrical Discharge Machining on the Fatigue Properties of High Strength Stainless Steel Creep Properties and Microstructures on Thermo-Mechanical and Magnetic Treated 9Cr Ferritic Steels Effect of Impurity Sulfur on the Stability of Cr Oxides Formed on both Austenitic and Ferritic Steels in a High-Temperature Steam-Atmosphere Two Specimen Complex Thermal-Mechanical Fatigue Tests on the Austenitic Stainless Steel AISI 316 L Effect of Sulfur and Phosphorus on Ductility of As Cast Iron-Nickel-Chromium Alloys, Direct Observations on In-Situ Fractured Surface by AES and TEM Modelling the Nitriding Kinetics of Iron-Chromium Alloys Tribological Behaviour of a Liquid Nitrided Precipitation-Hardening (PH) Stainless Steel Computer Models of Phase Separation Dynamics in Fe-Cr-Mo Ternary Alloys Formation of Ultra-Fine Grained SUS316L Steels by Ball-Milling and their Mechanical Properties after Neutron Irradiation Prediction of the Flow Stress Curves in Austenitic Stainless Steels Nitride Layer Formation on Chromium-Nickel Steel Claude Rossard, a French Pioneer in the Field of Thermomechanical Processing Application of the Quenching and Partitioning (Q&P) Process to a Medium-Carbon, High-Si Microalloyed Bar Steel Austenitic Grain Refinement in As Cast HSLA Steels by Dynamic Recrystallization Dilatometric Measurements on the Transformation Behaviour of Nb-Added CSiMn TRIP Steels Improvement of Creep Rupture Properties of Heat Resisting Steels by the Self-Healing of Creep Cavities Swirling Flow Effect in Immersion Nozzle on Heat and Mass Transport Phenomena in Continuous Casting Mold Structure and Phase Transformation under Quenching and Tempering during Heat and Thermomechanical Treatment of Steels Influence of Thermomechanical Processing on Microstructural Evolution in Si-Mn and Al-Mn TRIP Steels Effects of Alloy System on Spontaneous Reverse Transformation Behavior in Steel Static Recrystallisation-Precipitation Interaction in Microalloyed Steels Advances on the Characterization of High-Silicon Steel for Electrical Applications Produced by Thermomechanical and Dipping-Annealing Treatment Study of Grain Boundary Ferrite Nucleation in V Microalloyed Steels by EBSD New Process for High-Toughness Linepipe Material of Thin Slab and Direct Rolling Recrystallisation Nucleation during Annealing of Ti-Sulc Steel Ferritic-Pearlitic Steel with Deformation Induced Spheroidized Cementite Effects of Carbon Content on Wear Property in Pearlitic Steels Regression and Solute Drag Models for the Activation Energy of Static Recrystallisation in Hot-Worked Steels CATRAN - A Multi-Task Physical Model and Computer Program for the Prediction of the Microstructure of Steels According to an Arbitrary Cooling Schedule Hot Deformation of Austenite at Rates Encountered in the Finishing Stages of Hot Strip Rolling New Developments for Microalloyed Heat Treating Steels Effect of Grain Refinement and its Application to Commercial Steels Effects of the Addition of High Nitrogen Contents on the Microstructure of 25%Cr- 5%Ni Ferritic-Austenitic Duplex Stainless Steel (DIN Wr. Nr. 1.4460) The Influence of Al on the Mechanical Properties of Hot Rolled Steel Plates Heat Treatments to Improve Weldability of New Multiphase High Strength Steels Microstructural Changes of Cementite and Ferrite in Heavily Drawn Pearlitic Wires Strain-Induced Precipitation of Nb(CN) in Low Carbon Steels: Modelling and Experimental Validation How to Produce Super-Tough Structural Steels Thermomechanically Processed TS-BH Hot-Rolled Sheet Steel and its Strengthening Mechanism Investigating Precipitation in Microalloyed Austenite during Thermomechanical Processing Theoretical Study on Sympathetic Nucleation VS Ledgewise Growth of Bainitic Ferrite in Steel Study of the Role Played by Nitrogen on the Deep-Drawing Properties of Aluminium Killed Steel Sheets Obtained after a Continuous Annealing Simulation of the Hot Rolling of Trip-Assisted Multiphase Steels Grain Size Effect on Behaviour and Microstructure of a Warm Deformed Ti-IF Steel Application of Focused Optic Irradiation for Surface Treatment of Commercial Steels TWICE + HOWAQ Continuous Annealing Line: A New Facility for High Strenght Steels Production in Arcelor Group A Study on Ultrafine Ferrite Formation during Post Deformation Cooling Sigma-Phase Formation upon Solidification Rate in Heat-Resistant Steels Strain Induced Precipitation in a Multi-Microalloyed Steel Containing Nb and Ti during RPC Processing A Model for Niobium Carbonitride Precipitation in Ferrite Sigma Phase Precipitation in a Superferritic Stainless Steel Interest of the ThermoElectric Power Measurement for the Study of Strain Ageing in Bake Hardening Steels Effect of Low Carbon Contents on the Activation Energy for Plastic Deformation upon Steels Design of Novel High-Strength Bainitic Steels Aqueous Abrasive Wear of 8620 Borided Steel Deep-Drawable Steel Strip Produced by Ferritic Rolling Micromechanical Damage Simulations of TRIP Steels Microstructural Characterization of Multiphase Steels Optimisation of Hot Workability and Control of Microstructure in AISI Type 304L Stainless Steel Using a 'Refined' Dynamic Materials Model Processing Window A New Method to Determine the Strain and Strain Rate Hardening Characteristics from the Hot Torsion Test Effect of Solidification Structure and Thermomechanical Processing on Microstructure and Texture of Ferritic Stainless Steels Changes in Structure and Properties of Ferrous Substrates due to Silicon Surface Alloying by Laser High-Temperature Annealing for Maximization of Dissolved Boron in Creep-Resistant Martensitic 9Cr Steel Flow Stress and Microstructure Modelling of Ferrite-Pearlite Steels during Cold Rolling Modelling Upper and Lower Bainite Transformation in Steels Suppression of Surface Hot Shortness Caused by Copper in Recycled Steel The Structure Variation of Deformed Austenite during the Relaxation and the Refinement of Bainite in a Nb-B Steel Hydrogen Embrittlement and Electrochemical Corrosion Behaviors of Cu-IF and Microalloyed HSLA Steels Critical Assessment of the Bainite Transformation of Finely Grained and Deformed Austenite Influence of Relaxation Process on the Microstructure and Properties of Low Carbon Bainitic Steel Cold Plasma Discharge Processes: An Alternative Technology for Steel Annealing Development of an Ultra-Low Carbon High Strength Welding Wire Effect of Welding Thermal Cycle on the Microstructure and Mechanical Properties of Ultra-Fine Grained Carbon Steel High Grade Steel Development Development of High Strength Low Alloy TRIP-Aided Steels with Ultra Fine Grain A Novel 1500MPa Economic High Strength Steel Effect of NbC Distribution on Mechanical Properties in IF High Strength Steel with Fine Grain Structure Development of a Fire Resistant High Strength Low Alloy Steel for Construction Effects of Ausforming on Strength and Toughness in Low Alloy Bainitic/Martensitic Steels Influence of Liquid Core Reduction in the Microstructure of Steel Thin Slabs Martensitic and Reverse Transformation in Fe-Ni Bicrystals Effect of Ti Addition on Mixed Microstructure of Allotriomorphic and Bainitic Ferrite in Wrought C-Mn Steels A Quantitative Study of Interphase Precipitation in a Commercial Microalloyed Steel High Strength Stainless Steels Manufactured by Temperature Controlled Rolling Microstructural Changes during Stress Relaxation of a Deformed Nb-V Microalloyed Austenite Evolution of Austenite Microstructure and Precipitation State during Hot Rolling of a Nb-Microalloyed Steel Mechanical Behaviour and Corrosion Resistance of Stainless Steel Cold Rolled Reinforcing Bars Behavioural Study of a Manganese Steel Subjected to Abrasion Wear and the Influence of Thermal Treatment Correlation between Apparent Activation Energy for Hot Working and Temperature of No Recrystallization in Microalloyed Steels Experimental and Finite Element Modeling for Prediction of Optimum Phase Combinations in Dual Phase Steels A Physics-Based Transformation Model for Low-Carbon Steels: From First Principles to On-Line Application Heterogeneous Deformation Behavior of Pearlite Steels Studied by Neutron Diffraction Criteria for Weldability Assessment of Austenitic Stainless Steels Effect of Prior Austenite Microstructure on Austenite/Ferrite Transformation of Fine Grained High Strength Low Alloy Steel Effect of the Reduction Assigning in Two-Time Cold Rolling IF Steel Sheet for Drawability The Morphology, Crystallography, and Formation Mechanism of Grain Boundary Proeutectoid Cementite in High Carbon Steels Effect of Microalloying on Hot-Deformation Resistance during Rolling Proposition of Two Parameters for a Good Characterisation of the Austenitising Condition of Microalloyed Steels Synthesis and Characterization of Ni-Al Intermetallics Compounds with Grain Refinement Emphasis The Investigation of Superplasticity in NiAl Intermetallic Compounds Effect of Ag Alloying on Microstructure, Mechanical and Electrical Properties of NiAl Intermetallic Compound Superplasticity in Large-Grained Intermetallics Interfacial Reactions between Gamma TiAl and CaO Stabilized ZrO2 Shell Mould during Casting The Role of Interfaces in Plastic Deformation of Intermetallic Alloys The Influence of Microstructure and Residual Stress on Pre-Yield Cracking in TiAl-Based Alloys Behaviour of Ordinary Dislocations in Crept TiAl Alloys at High Temperatures Recrystallization Texture and Microstructure of an ODS Fe40Al Alloy High-Temperature Deformation Behaviour of Gas Atomized TiAl Alloy Powder Compacts Lamellar Transformations in Ti-Al Based Alloys Hot Working of Gamma TiAl Alloys for Turbine Applications Processing of Carbon Containing Gamma Titanium Aluminide Alloys Site Preference Occupation of Co and Mn in Fe3Al-Based Alloys Control of Lamellar Arrangement in TiAl Intermetallic Compound by Mechanical and Thermal Processes Slip Systems, Dislocation Structure and Plastic Deformation Behavior of Ni3Ti Single Crystals with D024 Structure Property Enhancement of Orthorhombic Ti2AlNb-Based Intermetallic Alloys Semi-Quantitative HRTEM for Partially Ordered Materials: Application to Al-Rich TiAl Alloys Mechanical Properties of Cold-Rolled Ni3Al Thin Foils Directional Solidification of TiAl Alloys for Aligning Lamellar Microstructures and Mechanical Properties of Directionally-Solidified Ingots Formation of FeAl In Situ ODS Alloy by Mechanochemical Reaction Using Mill Scale Powder and its Properties Oxidation Behavior of Mo-Based Alloys Coated with Silicide Using the Halide-Activated Pack Cementation Method Effects of 2 Spacing on Creep Deformation Behavior of Hard Oriented PST Crystals of a Lamellar TiAl Alloy Effects of Processing Condition on Properties of Ti-Aluminides Reinforced Ti Matrix Composites Synthesized by Pulsed Current Hot Pressing (PCHP) Selectivity of Anti-Phase Boundary Introduced in Al5Ti3 Superstructure Influence of the Addition of Cr and Al Elements to the Mo3Si Intermetallic Alloy on the Phase Construction and the Oxidation Behavior Crystal Structure and Thermoelectric Properties of ReSi1.75 Based Silicides Identification of Chirality of Enantiomorphic TaSi2 Crystallites by Convergent-Beam Electron Diffraction Enhanced Densification of Combustion Synthesized Ni-Al or Ti-Al Intermetallic Compounds by Third Element Addition Creep Properties of Ir-Based Alloy with FCC + L12 Two-Phase Structure Orientation Dependence of Pseudoelasticity in Fe3Al Single Crystals Improvement of the Oxidation Resistance of EPM Gamma-TiAl Alloy by Y-Addition Microstructure Control of DS NiAl/Ni3Al Alloy by Fabrication of Columnar-Grained NiAl Martensite High Temperature Oxidation of Ti-(43~52%)Al-2%W-(0~0.5%)Si Intermetallics Syntheses of Metastable Trialuminides by Mechanical Alloying Effects of Si and B Additions on the Thermal Stability of Lamellar Microstructure of TiAl Alloys The Effect of Li, Ce and Ni Additions on the Microstructure and the Mechanical Properties in the AlFe Intermetallic System Properties of -TiAl-M (M = Ag, Cr) Sputtered Films Strangeness of Deformation Behavior of Intermetallics Reaction Sintering of an Aluminium-Based Ternary Intermetallic and its Properties On the Strength of Ni3Al Based Compounds Crystallization Behavior and the Thermal Properties of Zr63Al7.5Cu17.5Ni10B2 Bulk Amorphous Alloy Processing Intermetallic Sheet Materials from Elemental Foils Using Cold Roll Bonding and Reaction Annealing Effect of Silicon on the Thermal Properties of the Zirconium-Based Bulk Amorphous Alloys Microscale Characterization of Deformation Defects in Bulk Intermetallics Alloys Using Electron Channeling Contrast Imaging Transient Liquid Phase Bonding of Intermetallic Compounds Sintering Behavior of Iron Aluminide Powders Discovery of Critical Oxygen Content for Glass Formation in Zr80Pt20 Melt Spun Ribbons Effect of Chromium Addition on the Properties of a Fine-Grained PM Ni3Al Alloy Superplastic Behavior of Hot Extruded Gamma TiAl (Mo, Si) Alloys Nanocrystalline Microstructures Produced by Twinning during Superplastic Deformation of a -TiAl Intermetallic Mechanosynthesis of an Fe-Ni Melt-Spun Amorphous Alloy under Different Milling Conditions Processing of TiAl, by Ceramic Crucible Induction Melting, and Pouring in Ceramic Shells Reaction Rate and Mechanism in the Formation of Rare Earth - Transition Metal Compounds Glass Formation in Eutectic Alloys Liquid Phase Sintering of WC-FeAl and WC-Ni3Al Composites with and without Boron Fabrication of Nickel-Aluminides Fiber / Nickel Composite by Reaction at Narrow Holes Synthesis of Magnesium-Particulate Composites by Thermomechanical Processing Processing and Properties of Metal Matrix Composites Synthesized by SHS Investigations of New Oxide Dispersion Hardened Platinum Materials in Laboratory Tests and Industrial Applications Time-Temperature Dependences of Fracture Toughnesses of Epoxy Resin and Silica Particulate-Filled Epoxy Composite In Situ Multilithic Metal Matrix Composites Produced by Codeformation Processing Microstructures for High Precision Cemented Carbide Micro-Die Machined by FIB Casting of Composite Material Strip Using a Downward Melt Drag Twin Roll Caster Process Improvement for Investment Casting of SiCp/AZ91D Magnesium Composite Material Mechanical Properties and Microstructure of Magnesium Alloy Matrix Composites Fabricated by Casting Process Electromagnetic Wave Absorption Properties of Amorphous Alloy-Epoxy Composites Effect of Thermal Treatment on Thermal Expansion Behaviour of Magnesium Alloy Based Hybrid Composites Synthesis of TiC/Ni Cermets via Mechanically Activated Self-Propagating High-Temperature Synthesis Deformation Behaviour of 7075Al/SiCp Composite during Multi-Pass Deformation at High Temperatures Steel Reinforced Thermoplastics Determination of the Interfacial Bond Strength for Composite Materials Computer-Assisted Design of Nb-Based In-Situ Composites and Superalloys Sliding Wear Behavior of TiB2 Nanoparticle Reinforced Copper Matrix In-Situ Composites under Electric Current Development of a New Composite Product from Blast Furnace Slag Wear and Mechanical Properties of Reaction Synthesized Ti-6Al-4V/TiC Composite Study of the Coefficients of Thermal Expansion of Phases Embedded in Multiphase Materials Internal Stress Reduction in Filament Wound Composite Pipes by Humid Conditioning: Numerical Simulation A Novel High Profit Recycling Technology for SiC Particle Reinforced Magnesium Composites Preparation and Characterization of Hydroxyapatite Powder/Poly(Acrylamide/Itaconic Acid) Composite Hydrogel Creep Model for Multidirectional Short-Fiber Reinforced Metal Matrix Composite A Study on the Improvement of the Toughness in Al-Cu-Fe Quasi-Crystals Thermal Cycling of Mg-MMCs Combustion Synthesis of Copper Matrix (Ti,W)C Reinforced Composites A Multi-Scale Continuum for Damaged Fibre Composites Development of Aluminium Composites through P/M Route: Case of Nitrides Characterisation of Orthorhombic (Ti25Al25Nb)/SiC Intermetallic Composites for Advanced Space Applications Novel Electronic Packages Made of Highly Loaded SiC Particle Aluminium Based Composites for Space Applications Ventilated Brake Discs Manufactured in Aluminium Matrix Composites and Hypereutectic Aluminium Alloys Study of a Curing Reaction of an Epoxy Resin Thermal Conductivity Estimation in Continuous Fiber Metal Matrix Composites with Random Distributions New Aluminium Matrix Composites Manufactured by an In-Situ Process Pressure Infiltration of Silver Into Compacts of Oxidised SiC Thermal Expansion Coefficient and Thermal Hysteresis of Al/SiC Composites with Bimodal Particle Distributions Effect of Plastic Deformation on the Microscopic Residual Stresses in 6061Al-15vol%SiCw Composites Processing and Properties of Cu Matrix Composites for Microelectronic Application Compression and Compression-Compression Cyclic Deformation Properties of Ferromagnetic Ni2MnGa-Based Shape Memory Alloy Deposition of Fe-Pd Ferromagnetic Shape Memory Alloy Thin Films by Sputtering and Their Shape Memory Behavior Martensitic Transformation of Partially Irradiated Ni-Ti Films, Resulting in a New Technique For Designing Micro-Actuators Effect of Geometric Factor on Characteristics in Multilayer Ceramic Actuators Theoretical Interpretation of Adhesion Phenomena and its Application to Micro-Manipulation Characteristics of Electronic Structures and Chemical Bonding in Hydrogen-Storage Compounds Molecular Dynamic Simulation of AFM-Based Nano Lithography Process for Fabrication of MEMS Components Fabrication and Development of Electroactive Ionic Polymer-Metal Composites and Their Applications as Smart Materials Constitutive Response of Polycrystalline Shape Memory Alloys Neutron Diffraction Study of Shape Memory Effect of Ni2MnGa-Type Alloys Phase Transformation of B2-PtTi with Ir Training of Magnetic Shape Memory Alloys Fabrication and Thermal Expansion of Al-ZrW2O8 Composites by Pulse Current Sintering Process Recent Progress of Magnetically Controlled Shape Memory Materials Twinning and Detwinning of <011> Type II Twins in NiTi Shape Memory Alloy Screen Printing of Carbon Nanotubes for Display Applications Effect of Pre-Strain on Shape Memory Strain and Recovery Stress of Ni-50.4Ti Shape Memory Alloy Conversion of Variants by Magnetic Field in Iron-Based Ferromagnetic Shape Memory Alloys Martensitic Transformations in NiTi Polycrystals Investigated by In-Situ Neutron Diffraction Near Net Shape, Low Cost Ceramic Valves for Advanced Engine Applications Shape Recovery of Ni-Ti Alloy Fiber-Reinforced Denture Base Resin by Smart Repair Process Phase Stability and Mechanical Properties of Ti-Ni Shape Memory Alloys Containing Platinum Group Metals Protein Motors: Their Mechanical Properties and Application to Nanometer-Scale Devices Voltage Criterion for Electrostatic Detachment of a Microparticle from a Micromanipulated Probe Processing and Properties of Mechanical Alloyed Al93Fe3Cr2Ti2 Alloys Dynamic Shock Compaction of Nanocrystalline Bulk Magnetic and Thermoelectric Materials Non-Equilibrium Properties of Nano Structured Materials A Study of Nanoindentation of Nanostructured Materials Preparation and Mechanical Properties of Nanocrystalline Bulk Materials by Spark Plasma Sintering Process Study on the Magnetic Properties and Microstructure of Nd-Fe-B Nanocomposite Permanent Magnets Bulk Nanocrystalline Ni3Al Material Prepared by Self-Propagating High Temperature Synthesis Casting at Low External Temperature Calculation of the Free Energy Barrier in the Freezing of Nanoclusters by Atomistic Simulations First-Principle Study on the Reactions and Dynamical Electronic Characteristics of Electromigration on Aluminum Nanowires Effect of Mo-Doping on the Sol-Gel Prepared Catalysts for Synthesizing Multi-Wall Carbon Nanotube Bundles Synthesis and Processing of Metallic Nano-Powders for the Study of their Mechanical and Magnetic Properties Bulk Nanostructured Aluminium Alloy Al93Fe3Cr2Ti2: Processing and Characterisation Quantum Sized Chromophores in Vanadium Ceramic Pigments Influence of the Strain Rate on the Mechanical Behaviour of a Nanocrystalline Mg-23.5Ni Alloy The Isothermal Oxidation Response of a Gamma-Titanium Aluminide Alloy Laser - Induced Surface Modification in A319Al Alloy Surface Modification of Dilute Mo-Ti Alloys by Gas Carburization Effects of Bond Coat Processing on the Durability of Thermal Barrier Coatings Understanding the Formation of D.C. Plasma Sprayed Coatings High Properties Metallic Alloys Obtained through the Thermal Spray Route On Production of Nanocrystalline Ternary Nitride Coatings via Magnetron Sputtering Mechanism, Modeling and Application of Laser Large Area Surface Modification Copper Deposition and Subsequent Grain Structure Evolution in Narrow Lines Application of Electroless Coating for Processing and Joining of Advanced Materials Modification of Fatigue and Creep Properties of Ferritic Stainless Alloys Using Plasma Immersion Ion Implantation Improvement of High Temperature Corrosion Resistance of Tool Steels by Nanostructured PVD Coatings Electrolytic Al2O3/ZrO2 Coating on Co-Cr-Mo Implant Alloys Possibility of Repairing Damaged Die Casting Die Surfaces Using CO2 Laser Surfacing Microstructure and Residual Stress Analysis after Laser Cladding of Low-Carbon Steel with Powdery SiC, Stellite 6, and Stellundum 481 How Creep Properties Influence the Stress State of Thermal Barrier Coatings Deposition/Detachment of Particles on Plasma Treated Polymer Surfaces Development of Solid Oxide Fuel Cells (SOFC) for Stationary and Mobile Applications by Applying Plasma Deposition Processes M3B2 Boride Cermet Coating by Sintered Powder Research Progress on Laser Cladding for High-Temperature Wear and Corrosion Resistant Transition Metal Silicides Composite Coatings Oxidation Behavior of Cr-Doped Nb(Si,Al)2 and Coating Nb Substrates with Cr-Doped Nb(Si,Al)2 Surface Engineering of Titanium Alloys: New Prospective Applications The Characteristics of TiCrN Film Prepared by the Dynamic Ion Beam Mixing Method Laser Surface Treatment of Sintered M42 High-Speed Steel Diluted with Iron Oxidation Resistance Coating for Niobium Base Structural Composites The Influence of Surface Preparation on the Properties of Tungsten Carbide Coatings Produced by Gas-Detonation Method Hot Corrosion Behavior of Yttria and Ceria Stabilized ZrO2 Thermal Barrier Coatings How to Select Induction Surface Hardening and Finished Grinding Conditions in Order to Ensure High Compressive Residual Stresses on Machine Parts Surface Formation of Super-Hard Modified Surface by Reactive Electrical Discharge Machining Surface Modification by Duplex Process Consisted of Radical Nitriding and PVD Duplex Treatment for Improvement of the Die Performance Wear Behaviour of HVOF Thermal Sprayed WC-Co and CrC-NiCr Coatings Developing Ultrafine-Grained Microstructures through the Use of Severe Plastic Deformation Microstructural Control of a Precipitate-Hardenable Al-Ag Alloy Using Severe Plastic Deformation Microstructure Evolution and Mechanical Properties in Al-Mg Alloys during Severe Deformation by ECAP and during Subsequent Annealing Ultra Grain Refinement of Aluminium 1100 by ARB with Cross Rolling Influence from Extrusion Parameters on High Strain Rate and Low Temperature Superplasticity of AZ Series Mg-Based Alloys Investigation of Texture in ECAP Materials Using Neutron Diffraction Mechanical Properties as a Function of Grain Size in Ultrafine Grained Aluminum and Iron Fabricated by ARB and Annealing Process Development of Nano-Structured 1200 and 3103 Aluminum Alloys by Equal Channel Angular Pressing Ultra Grain Refinement of 1100 Aluminium Strip by Tandem Rolling Comparison between Methods to Characterize the Superplastic Materials Microstructure and Mechanical Properties of Interstitial Free Steel Subjected to Equal Channel Angular Extrusion On the Increase of Thermal Stability of Ultrafine Grained Materials Obtained by Severe Plastic Deformation Properties of Annealed High Strength Steels Deformed by Repetitive Side Extrusion Process An Investigation of Deformation in Aluminum Single Crystals Using Equal-Channel Angular Pressing Microstructural Change during Mechanical Milling Treatment in Fe-C Alloy Powders with Different Initial Microstructure Microstructural Changes in Copper Processed by Equal Channel Angular Extrusion and Static Annealing Enhanced Superplasticity in Zirconia-Alumina-Spinel Composite Ceramic Superplasticity of Fine-Grained AZ 91 Alloy Processed by Rotary-Die Equal-Channel Angular Pressing High Strength and Good Plasticity of L1o Ordered Alloys Provided by Preliminary Strong Cold Deformation Microstructure and Thermal Stability of Tungsten Based Materials Processed by Means of Severe Plastic Deformation Fabrication of Surface Nanocrystalline Aluminum Alloys Crystal Plasticity Model of Microstructure Formation at Severe Strain Thermomechanical Treatment of Ti-Ni-Based Shape Memory Alloys Using Severe Plastic Deformation Development of Submicrocrystalline Fe - O Steels under Mechanical Milling Followed by Consolidation Multi Equal Channel Angular Pressing with Rotational Dies High Strain Rate Superplasticity of Ultrafine Grained 5083 Al - 0.2 wt.% Sc Fabricated by ECAP Formation of Sub-Micron Structure for a Ti Alloy Deformation Structure and Crystal Orientation of Copper Single Crystals Deformed by Equal Channel Angular Pressing Bulk Nanostructured Steels (BCC), Al Alloys (FCC) and Pure Ti (HCP) Processed by Equal Channel Angular Pressing Influence of ECAP Modes on Texture and Microstructure Evolution of Aluminium and Copper Ion Irradiation Effect on Superplastic 3Y-TZP Ceramics Microstructures of Nickel Deformed by High Pressure Torsion to High Strains Effect of Backpressure on the Structure and Properties of Al-Based Alloys Processed by ECAP The Effects of Sandglass Extrusion on Material Microstructures and Properties Proposals of Novel Surface Modification Technology Using Friction Stir Welding Phenomenon Microstructural Modification and Resultant Properties of Friction Stir Processed Cast NiAl Bronze Improvements to the FSW Process Using the Self-Reacting Technology Laser Treatment Method for Improvement of the Corrosion Resistance of Friction Stir Welds SEM-EBSD Characterisation of the Deformation Microstructure in Friction Stir Welded 2024 T351 Aluminium Alloy The Effect of Thermal Treatments on the Corrosion Behavior of Friction Stir Welded 7050 and 7075 Aluminum Alloys Friction Stir Welding of Al2O3 Particulate 6061 Al Alloy Composite Thin Section Airframe Alloy Welding within WAFS The Influence of Friction Stir Processing on Microstructure and Properties of a Cast Nickel Aluminum Bronze Material Microstructural Modification of Cast Aluminum Alloys via Friction Stir Processing High Speed Friction Stir Welding of Aluminium Panels for Transport Applications Friction-Stir Processing of a High-Damping Mn-Cu Alloy used for Marine Propellers Investigation of the Use of Friction Stir Processing to Repair and Locally Enhance the Properties of Large Ni Al Bronze Propellers Residual Stresses, Defects and Fatigue Cycling in Friction Stir Butt Welds in 5383-H321 and 5083-H321 Aluminium Alloys Microstructural and Mechanical Evolutions within Friction Stir Welds of Precipitation Hardened Aluminium Alloys Thermomechanical Conditions and Resultant Microstructures in Friction Stir Welded 2024 Aluminum Improved Fatigue Performance of Friction Stir Welds with Low Plasticity Burnishing: Residual Stress Design and Fatigue Performance Assessment Microstructure and Properties of Aluminum Alloys Friction Stir Welds for Aircraft Application Effect of Friction Stirring on Microstructure in Equal Channel Angular Pressed Aluminum Alloys Joint Properties and Thermal Behaviors of Friction Stir Welded Age Hardenable 6061Al Alloy Utility of Relatively Simple Models for Understanding Process Parameter Effects on FSW Friction Stir Welding of T-Joints Development of Friction Stir Forming Friction Stir Processing of Aluminum Alloy 5083 Plate for Cold Bending Investigation of the Microstructure and Properties of a Friction Stir Welded Al-Mg-Sc Alloy Numerical Simulation of Friction Stir Welding Microstructural Evolution in Ti-6Al-4V Friction Stir Welds Friction Welding of AZ31 Magnesium Alloy Grade Development of Polycrystalline Cubic Boron Nitride for Friction Stir Processing of Ferrous Alloys Effect of Time, Temperature, and Solution Composition on the Passivation of 316L Stainless Steel for Biomedical Applications Effects of Titanium Surface Topography on the Cell-Extracellular Matrix Interaction in Osteoblasts Relationships between the Surface Morphology and a Physical Response in the Biomaterial Field Relationships between Processing and In-Vitro Dissolution of Calcium-Based Bioceramics Porous Alginate/HAp Sponges for Bone Tissue Engineering Biomaterial/Polymer Composite for Heart Valve Engineering: Biocompatibility Testing The Improvement of Biocompatibility of an Equiatomic TiNi Shape Memory Alloy by DC Plasma-Polymerized Hexamethyldisilazane Coatings Evaluation of Ligand Binding to Type 1 Collagen through Computational and Analytical Methods Pulsatile Flow Testing of a Biomaterial/Polymer Composite Heart Valve Obtained Through Tissue Engineering Fatigue Characteristics of Dental Cast Titanium Alloy, Ti-6Al-7Nb, Conducted with Thermochemical Heat Processing Sintered Porous Titanium and Titanium Alloys as Advanced Biomaterials Biological Behaviour of Injectable Calcium Phosphate (CaP) Cement Preparation of Thermosensitive Hybrid Hydrogels for Biomaterials in Drug Release Surface Properties of Ca-Ion-Implanted Ti-Ni Shape-Memory Alloy Composition Dependence of Young's Modulus in Beta Titanium Binary Alloys Interaction of Type IV Collagen Aggregates with Cells Polymers with Nanostructured Surface Features for Soft Tissue Replacement Applications Mechanical Properties of Ti-Base Shape Memory Alloys Increased Osteoblast Function on Nanostructured Materials Due to Novel Surface Roughness Properties Improving the Fatigue Properties of Poly (Methyl Methacrylate) Orthopaedic Cement Containing Radiopacifier Nanoparticles Ionizing Irradiation for Sterilization and Modification of Orthopaedic Biomaterials Multifunctional Protein-Based Matrix for Drug Delivery and Wound Management Controlled Release from Poly(Lactic-Co-Glycolic Acid) Microspheres Embedded in an Injectable, Biodegradable Scaffold for Bone Tissue Engineering Oxide Films on Metallic Biomaterials: Myths, Facts and Opportunities The Influences of Ta and Sn on Phase Constitution and Aging Behavior of Ti-Ta-Sn System Alloys Quenched from a Temperature within Beta Single Phase Region Bioinspired Polymer Surfaces for Prevention of Bioresponse Effects of Heat Treatment of Spherical Shape Tetracalcium Phosphate on the Reactivity and Injectability of Apatite Cement Novel Machinable Calcium Phosphate Glass-Ceramics for Biomedical Use Hydroxyapatite Coating on Titanium by Thermal Substrate Method in an Aqueous Solution and its Behavior in SBF Longterm Viscoelastic Behavior of Dental Composites Organic Modification of Porous -Tricalcium Phosphate to Improve Chemical Durability Effects of Casting Defects and Microstructure on Fatigue Properties of Cast Ag-Pd-Cu-Au-Zn Alloy for Dental Applications Engineering Biomaterials for Control of Immune Cell Functions Bioactive PMMA Bone Cement Prepared by Chemical Modification An Integrated Method for Evaluating the Mechanical Integrity of Biomaterials In-Situ New Class of Lactic Acid Copolymers with Reactive and Hydrophilic Segments for Degradable Biomedical Materials Enhanced Bioactivity of Electrically Poled Hydroxyapatite Ceramics and Coatings Polyrotaxanes: Challenge to Multivalent Binding with Biological Receptors on Cell Surfaces Thermal Ablation Effects of Duplex Stainless Steel Thermo-Implants Evaluation of Tissue Adhesion Preventive Surface Modified Natural and Synthetic Polymeric Materials Development of Novel 'Pseudo'Polypeptidic Biodegradable Polymers Based on Natural Amino Acid L-Tyrosine for Biomaterial Application Surface Grafting Polymerization and Crosslinking of Thermosensitive NIPAAm Hydrogels onto Plasma Pretreated Substrates and Drug Delivery Properties Preparation and Characterization of Chitosan/Alginate Sponge Immobilized onto Polyurethane-g-Acrylic Acid Modified Film Surface as a Wound Dressing The Effect of Maleic Anhydride/Glycerol and Plasma Treatment on Biodegradable LDPE/Tapioca Starch Blends A New Internal Element in Dental Implants Heat Treatment Influence over the Austenitic Stainless Steel Properties used as Biomaterials High Performance Mg Alloy by Grain Refinement Aluminum Alloyed Cast Iron as an Ecomaterial Sustainable Products/Services Indicators 2002 within Matsushita Electric Group Recycling of Iron and Steel by Solid State Processes Resources Circulation-Oriented Ecomaterials Design of Continuous Fiber Reinforced Concrete (FRPRC) Estimation of Energy Requirements and Atmospheric Emission in Continuous Casting Process for Copper Wire Physico-Chemical Approach for the Ecomaterialization of Steelmaking Slags Production of Fine Uniform Lead-Free Solder Powders by Hybrid Atomization Ecomaterial Processing for Recycling of Iron Scrap Containing Impurities Material Life Cycle Assessment for Diecasting Process Mechanical Properties and Microstructure of New Ni Free White Cu Alloy New-Sandwiched Hydrogen Separation Membranes with Low Environmental Impact Mechanical Properties of Al/Al3Sc Metallic Multilayers - Deformation Mechanisms at the Nanoscale MgB2 Thin Film Growth and Characterisation Structure and Magnetic Properties of Sputtered Fe100-xPtx Alloy Thin Films Isotopic Exchange between Gaseous Hydrogen and Scandium Dideuteride Thin Films Characterization of Polymer Films by Flow Microcalorimetry Processing Effects on Structure-Property Relationships in Sputter Deposited Thin Gold Films Elastic Properties of Supported Polycrystalline Thin Films and Multilayers: an X-Ray Diffraction Study A Problem of Anisotropic/Isotropic Bimaterial with a Singularity or under a Remote Stress Glide and Climb of Dislocations in Ultra-Thin Metal Films Characterization of Anodic Films Formed on Mg-Al Alloys in Alkaline Bath Tailoring of the Elastic Properties by Texture Control in Ferroelectric Thin Films for MEMS Chemical Vapor Deposition of Cr-Based Thin Films as Diffusion Barriers in Copper Metallization Thermoelectric Properties of CoSi Thin films Structural and Mechanical Properties of Stainless Steel Thin Films Elaborated by Thermal Evaporation and Ion Beam Sputtering Formation of Calcium Phosphate Film on Ti Substrate in Aqueous Solutions in the Control of Temperature and Ion Activity The Effect of Lattice Strain on the Step Edge Diffusion and Morphological Development during Epitaxial Growth Evaluation of Interface Strength between Thin Films Fabricated on a Silicon Substrate for an Advanced LSI on the Basis of Fracture Mechanics Concept TiNi Thin Films for Microactuators and Microdevices: Sputter Deposition and Processing Techniques The Effect of Grain Boundary Characteristics on Microstructure and Stress Void Evolution in Electroplated and Sputtered Cu Films Near-Zero-Thickness Self-Assembled Molecular Layers for Future Device Structures: Interfacial Adhesion and Diffusion Barrier Properties Thermally Activated Flux Creep in High Tc Superconductors Improved-Trapped Magnetic Fields in Top Seeded Melt Grown YBCO Superconductor Doped with Depleted and Enriched Uranium Oxide Metallic Buffer Layers for Y-123 Coated Conductor Copper and CuNi Alloys Substrates for HTS Coated Conductor Applications Protected from Oxidation Chemical Approach to the Deposition of Textured CeO2 Buffer Layers Based on Sol Gel Dip Coating Synthesis and Processing of High Temperature Hg-Based Superconductors, from Bulk to Thin Films Study of the Surface Oxidation Epitaxy of Pure Ni High Tc Superconductors - From Material to Applications Epitaxial Growth and High-Frequency Properties of YBa2Cu3O7 Electrodes on LiNbO3 Texture, Microstructure and Stress Investigations in 0.18 m Damascene Cu Interconnect Lines The Effect of Grain Growth Suppression on the Interface Population in Nimonic PE16 Fractal Properties of Dynamic Recrystallized Grain Boundaries Shear Texture Control in Low Carbon Steel Sheet by Differential Speed Rolling Effect of c/a-Ratio on Crystallographic Texture and Mechanical Anisotropy of Hexagonal Close Packed Metals Orientation Related Microstructure Evolution during Continuous Annealing of a Cold-Rolled Low Carbon Steel Grain Size Evolution in Dynamic Recrystallization Effects of Thermomechanical Processing on Texture Formation in Iron Aluminides The 3-Dimensional X-Ray Diffraction Microscope and its Applications to Recrystallization Studies Anisotropy of Tensile Properties of Extruded Magnesium Alloy AZ31 Study of Scale Growth on Steel Substrates Using Electron Back Scatter Diffraction Oxidation, Crystallization and Diffusion Processes in Basalt Microstructural Evolution in a Model Fe-30wt%Ni Alloy during Hot Plane-Strain Compression Microtexture Induced by the Bainitic Transformation in Steels during Welding. Effect on the Resistance to Cleavage Cracking Relationship between Crystallographic Fabric (Texture) and Elastic Properties of Rocks: Implications from Experiments and Calculations Thermo-Mechanical Processes in Sapphire Crystals with Different Orientations Recrystallization Study of a Low Carbon Steel after Tensile Strain Modeling of Texture and Texture-Related Properties during the Thermo-Mechanical Processing of Aluminum Sheets Textures Development in Cold-Worked Ferrite-Pearlite Steels by Drawing to Moderate Reductions Microstructure and Properties of Hot Extruded Brass CuZn40Pb2 Application of the Texture Component Crystal Plasticity FEM to Forming Simulation Interactive Texture- and Finite-Element Simulation for Modelling of Complex Deformation Processes for HCP-Metals The Applicability of Conventional Fiber Texture Analysis Techniques in Electron Backscatter Diffraction Effect of Rolling Temperature on the Recrystallization Texture of Warm Rolled Steels Influence of Repeating of Partial Annealing and Light Rolling Process on Cube Texture in High Purity Aluminum Analysis of Texture Evolution in Cold Rolled and Annealed 3%Si-Fe (100)[011] Single Crystal The Texture Development in the Nb-Microalloyed Steels as an Effect of Intercritical Rolling Influence of Additives upon Nucleation and Growth of Copper on Titanium Substrates during Electrodeposition Simulation of Grain Growth Selection during Recrystallization of Highly Cold Rolled Aluminum Effect of Excess Vacancies on Hydrogen Absorption-Desorption Characteristics in Rapidly Solidified B2 TiCo Effect of High Magnetic Field during Primary Annealing on Texture of Silicon Steel Microtextural Analysis of Grain Fragmentation in Aluminum Increasing Desirable Recrystallization Texture in IF Steel by Controlled Rolling Revealing a Parent Phase Structure after Transformation Based on Crystallographic Relations Selective Growth in a Scratched Fe-2.8%Si Single Crystal Reducing Cube Volume in Recrystallized Texture by Controlling the Finishing Temperature and Rolling Strain in Al-5%Mg Alloy Shear Band Formation in Warm Rolled IF Steel Coupled FEM and Microstructure Modeling Applied to Rolling and Extrusion of Aluminium Alloys Microstructure Engineering for Continuous Annealing of Steels and Aluminum Alloys Simulation of Microstructural Evolution in Rod Rolling of a Medium C-Mn Steel Analysis of the Influence of the Initial Billet Geometry and Die Design on the Product Geometry during Bi-Material Tube Extrusion A Physical Model for Prediction of Microstructure Evolution during Thermo Mechanical Processing Prediction of Material Flow Pattern in the Hot Extrusion of Aluminium Alloys by the Finite Element Method FEM Analysis of Hot Forging Process for an Automotive Lower-Arm Connector A New Approach to Interface Engineering by Using an External Magnetic Field Process Limits and Material Behaviour in Incremental Sheet Forming with CNC-Tools Process Control Model for Blast Furnaces Mathematical Modeling of the Mean Flow Stress during the Hot Strip Rolling of Ti-Nb IF Steels Modelling Hot Deformation of Al-Zn-Mg Alloy A Model for the Prediction of Microstructure and Mechanical Properties in Cold Rolled and Annealed TRIP Steels Research on the Coupling between Electromagnetic Pressure and Temperature Field in Dual-Frequency Electromagnetic Shaping Process An Investigation on Machinability and Application of Board Materials (BM) in Low Volume Production of Sheet Metals Modelling of Phase Separation Dynamics in Iron-Based Ternary Alloys Modelling of Recrystallization and Grain Boundary Migration by Cellular Automata A Phase Field Model for the Step Dynamics Including Elastic Interactions between Steps Simultaneous Estimation of Heat Transfer Boundary Conditions during One-Sided Spray Cooling Recrystallization, Relation between Modelling and Experiment Data Based Modelling for Prediction and Control of Internal Cleanliness in Steel Strips Constitutive Modeling of High Temperature Mechanical Behavior of a Medium C - Mn Steel Incorporating Strain Gradients in Micromechanical Modeling of Polycrystalline Aluminum Austenite Evolution Modeling in Nb Microalloyed Steels during Thin Slab Direct Rolling Modeling the Hot Flow Stress of Commercial Purity Coppers with Different Oxygen Levels A Network Model to Simulate Transient Non-Lineal Thermal Processes in Metals and Alloys with Allotropic Transformations Mathematical Model for the Residual Stresses Induced during the Heat Treatment of Grinding Balls Non Linear Behavior Micromechanical Multi-Scale Modelling of Discontinuous Reinforced Composites X-Ray Microbeam Strain Measurements in Polycrystalline Films Evaluation of the Influence of Shot Peening Parameters on Residual Stress Profiles Using Finite Element Simulation Contribution of X-Ray Diffraction to Analyse and Improve the Mechanical Behaviour of Materials Experimental Analysis and Numerical Simulation at Metal-Ceramic Interface Residual Stress Measurements of Structural Components by Neutron Diffraction and Proposal Measurement Standard Stress Determination with High Lateral Resolution Using Neutron Diffraction Relaxation of Residual Stresses during Fatigue Cycles in Steels Evaluation of Side Notch Charpy Test on Laser Welded Joint Finite Element Analysis in Pulsed GTA Weldments Microstructures at Aluminum - Copper Magnetic Pulse Weld Interfaces Microstructure and Mechanical Property of Laser Welds of Single Crystal Nickel Base Superalloy CMSX-4 Tensile Properties and Microstructure of Weld Metal of X80 Steel The Nature of Acicular Ferrite in Ferrous Weld Metals and the Challenges for Microstructure Modelling Computer Aided Design of Pulsed Arc Welding Ensuring Defectless Joint of Metals Productivity Gains by Flux Bounded TIG Welding of Aluminum Possibility of Industrial Application by the Use of Underwater Shock Wave for Explosive Welding of Various Plates 3D-Numerical Model Predicting Penetration Shape in GTA Welding New Developments in High-Performance Arc Welding Processes Simulation Model for MAG Arc Welding as an Engineering Tool Some Aspects of Weldability and Jointability of Duplex Stainless Steels Microstructural Aspect of Cold Crack Susceptibility in High Strength Weld Metal Joining of Silicon Nitride by Interposing Metal Foils: Effects of Temperature and Bonding Pressure Thermodynamic Issues of Lead-Free Soldering in Electronic Packaging Effect of Activating Fluxes on the Penetration Capability of the TIG Welding Arc: Study of Fluid-Flow Phenomena in Weld Pools and the Energy Concentration in the Anode Spot of a TIG Arc Plasma Current Problems in Hot Cracking Research Described on the Example of PVR Test Estimation of Temperature Distribution and Cooling Rate in Arc Welding Using Three-Dimensional Finite Element Analysis Arc Behavior under Extreme Condition Processing of Advanced Materials with a High Frequency, Millimeter-Wave Beam Source and other Microwave Systems Jointing Structures of Some Kinds of Lead-Free Solder on EN/IG Finished Boards Microstructure Development in Single Crystal Welds Joining of Steel to Aluminum Alloy by Interface-Activated Adhesion Welding Development of an Arc Sensor with Mechanized Rotation of Electrode Electrode Storage Condition Effects on Diffusible Hydrogen in SMAW Deposits Thermal Analysis and Microhardness Mapping in Hybrid Laser Welds in a Structural Steel Weld Metal Test Performance Requirements: A Critical Appraisal of Future Needs The Influence of the Processing Temperature on the Microstructure of -TiAl Joints Brazed with a Ti-15Cu-15Ni Alloy Advances in Processing Technology for Powder-Metallurgical Tool Steels and High Speed Steels Giving Excellent Cleanliness and Homogeneity Physical Simulation and Analysis of the Hot Workability of a New Powder Metallurgical ''Micro-Clean'' HS-Steel Grade Characterization by TEM of a Supersaturated P/M Al-Mg-Zr Alloy after Thermal Treatments Powder Injection Molding of Cemented Carbides Powder Metallurgy in Tooling - Theoretical Background, Material Production and Processing Densification of W-Cu Powder with Submicron Size Microstructure Characterisation from m to nm Scale for Interface Analysis Modelling of Hot Isostatic Pressing of Metal Powders Importance of Ball-Milling for the Sintering of Yttria Dispersed W Alloys Numerical Simulation of the Fatigue Lifetime of a Powder Metallurgical Gear Based on the Green Density Distribution Advanced Materials for Micro Powder Injection Molding Current Status of Micro Powder Injection Molding Behavior of Reduction and Sintering in Cementite Powder Properties of AlN Powders Synthesized by Rapid Nitridation of Al Powder in Floating System Development of Ultrafine Grained Austenitic Stainless Steels by High Strain Powder Metallurgy Process A New Powder Metallurgical Process for Upgrading Recycling of Fe-Cu Alloy Integrated P/M Processing for System Design of Nanocrystalline Ceramics Use of SHS Reaction between Powder and Droplets for Coating, Welding and Freeform Fabrication of Intermetallics Roles of Potassium Bubbles in High Temperature Creep Resistance of Doped Tungsten Fine Wires The Application of Hot Forming to Influence the Properties of P/M Aluminium Basis Materials Micro Powder Injection Molding of Metal Microstructures Extrusion and Thermo-Chemical Processing of Layered Linear Cellular Alloys Processing and Properties of Multiphase Mo-Si-B Alloys Structure and Properties of Consolidated Attrition-Milled Al-5%Ti PM Specimens Advances in MA Aluminium Powders Consolidation by Mechanical Cold Pressing and Vacuum Sintering Processing of Advanced Shape Memory Materials by Powder Metallurgy Preparation and Characterization of Three Fe-M (M = Ni, Zr, Nb) Based Alloys Produced by Mechanical Alloying Effect of Mg as Sintering Additive on the Consolidation of Mechanically Alloyed Al Powder Influence of Carbon Activity and Oxygen Potential of Sintering Atmospheres on the Microstructural Characteristics of Low Alloy P/M Steels Ni Diffusion Process between Austenite and Ferrite in a Sintered Duplex Stainless Steel Obtained by Powder Mixing Optimization of the Synthesis of Soft Magnetic Materials by Mechanochemical Process at Room Temperature Oxidation Behaviour at High Temperature of Ferritic Stainless Steels Manufactured by Powder Metallurgy Metal Injection Moulding (MIM) of M2 High Speed Steel Using a Polyethylene Based Binder Low-Temperature and High-Temperature Corrosion Behaviour of Powder Metallurgical Duplex Stainless Steels SHS Production, Processing and Evaluation of Advanced Materials for Wear-Resistant Cutting Tools Orientations and Tendencies in Manufacturing Industry of the Permanent Ceramic Magnets Using PM Technologies Strain-Rate Dependence of Dynamic Twin Nucleation at Triple Junction in Copper The Influence of Grain Size on Deformation of Copper Structure and Mechanical Properties of Materials in the Temperature Ranges of Cold, Warm and Hot Deformation The Crystallization, Structure and Work Hardening of Casting Fe-N-V Alloys Mechanical Properties of Grain Boundaries and Triple Junctions in Metals Hot Working of an as-Cast Mg-2%Al Alloy Plastic Deformation and Stress-Induced Phase Transformation in Polycrystalline Diamond: Common Phenomena? Elastic Stability and the Limits of Strength Change of Elastic Constants of Pure Iron Deformed by Cold Rolling A New Theoretical Determination of Yield Stress Based on Efficient Area of Stress and Universal Fractal Power Law Formability Criteria for Cold Heading Applications Microstructure Evolution of Hot Rolled W Sheets after Different Heat Treatments Influence of Multi-Step Nitriding Condition upon Mechanical Properties of Dilute Mo-Ti Alloys Materials Selection for Solid Oxide Fuel Cells Fatigue Behavior of Glass Ceramics in Water Environment Influence of Neutron Irradiation on Hardening and Embrittlement Phenomena in Reactor Pressure Vessel Cladding Material Correction of CTOD Toughness for Constraint Loss in Structural Components Improvement in Mechanical Properties of Hydroxyapatite Objects with Controlled Porosity Made by Modified Gelcasting Process Sol-Gel-Derived Nano-Porous Glasses with High Proton Conductivity Study on Segregation-Dezincification Relationship in Bi-Se-Bearing Brasses Calorimetric and X-Ray Measurements in Ultrafine-Grained Nickel Peculiarities of the Mechanical Behavior of Metallic Glasses Investigated by Indentation Techniques Numerical Cutting Sensitivity Study of Tool-Chip Contact Unified Formulation to Predict the Tensile Curves of Steels with Different Microstructures Portable X-Ray Apparatus for Stress Measurements Computer Simulation of Change in the Chemical Composition of Coke Ash in the Blast-Furnace Effect of Boron on Lamellar Grain Refinement and Lath Formation in Wrought Processed Gamma TiAl Alloys Modelling of Homogenisation of AA3103 Measurement of / ' Lattice Mismatch in Creep Deformed Single Crystal Superalloy SC16 Using Synchrotron X-Radiation Double Bladed Effect of Re on High-Temperature Oxidation and Hot-Corrosion of Nickel-Based Superalloys Microstructural Evolution during the Hot Deformation of Magnesium Alloy AZ31 Thickness of Pancake Austenite Controlling the Size of Ferrite Transformed from Variously Deformed Austenite Microstructure and Thermal Stability of Lamellar Cr-Silicides Microstructure of M-W (M = Fe, Ni) Alloys Produced by Electrodeposition and Mechanical Alloying Structure and Mechanical Properties of In-Situ Discontinuously Reinforced Composites of Ti-TiB-System Microstructure and Properties of Aluminum Friction Stir Welds Grain Refinement under Multiple Warm Compression in an Al-Mg-Sc Alloy Thermo-Mechanical Processing Improvements: Benefits and Costs Ecomaterials
• Concept, Practice and Future Eco-Benign Mesoporous Materials for Organic Reactions Cost Reduction in Titanium Production and Processing Precipitation Strengthening of Fully Lamellar Gamma-TiAl Alloyed with Carbon and Silicon

by "Nielsen BookData"

Details

• NCID: BA62403928
• ISBN:
  • 0878499199
• Country Code: sw
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Zuerich-Uetikon, Switzerland
• Pages/Volumes: 5 v. (cvi, 4640 p.)
• Size: 25 cm
• Parent Bibliography ID:
  • BA00294222