Advanced ceramics and composites : proceedings of the 2nd International Symposium on Advanced Ceramics, Shanghai Everbright Convention & Exhibition, Centre International Hotel, November, 2002, Shanghai, China
Author(s)
Bibliographic Information
Advanced ceramics and composites : proceedings of the 2nd International Symposium on Advanced Ceramics, Shanghai Everbright Convention & Exhibition, Centre International Hotel, November, 2002, Shanghai, China
（Key engineering materials, v. 247）
Trans Tech Pub., c2003
Available at / 2 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Ceramics promise to be one of the leading materials in the 21st century; with their enormous potential to play essential roles in the important and expanding fields of nano-science and technology, information technology, ecological science and engineering, energy-related engineering and life sciences.
Table of Contents
Lessons from 30 Years of Structural Ceramics
Nano-Scale Composite Structure of Polymer-Route Si-C-M-O Fibers Characterized by Small-Angle X-Ray Scattering
Preparation and Properties of Silicon Carbide Reticulated Porous Ceramics
Science-Based Ceramic Powder Processing
A New Opportunity for Nanopowder Forming Processes
A New Approach to Preparing High-Performance Ceramic Parts with Complex Shapes: Aqueous Colloidal Injection Molding
Aqueous Slip-Casting of AlN
Nanosized Oxide Powders Fabricated by Mimic Alkoxide Methods and their Sintering
The Research of Multi-Phase Materials
Deformation during Sintering in Alumina Ceramic Made using Uniaxial Pressing
Densification Behavior and Grain Boundary Diffusivity in Cation-Doped Alumina
Densification of Ca- SiAlON Nano Particles by Spark Plasma Sintering
Fabrication of -SiAlON Nano-Ceramics and their Properties
Non-Equilibrium Processing of Ceramics
Effect of TiO2 and AlN Additions on the Sintering Behavior of the Si3N4-Y2O3-Al2O3 System
Effect of Coarser Grains on Sintering of AlN
Densification and Mechanical Properties of 4AlN*SiC Ceramics - Utilization of Nanocomposite Powders Prepared by the Nitridation of Aluminum Silicon Carbide -
Low-Cost Production of Large RBSC Components by Plastic Forming Processes
Synthesis of -SiAlON from Slag by SHS and its Reaction Behavior
Fabrication and Evaluation of Reaction-Bonded Aluminum Nitride from Al Powder Compacts Coated with CaCO3, SrCO3 and BaCO3
Synthesis of -SiAlON Powder by Carbothermal Reduction-Nitridation of Zeolite
In Situ Reactive Synthesis and Phase Stability Investigation in the AlN-SiC System
Reaction Synthesis of Ceramic Composites Containing In Situ Formed Boron Nitride as Dispersed Phase
Molecular Chemical Concepts for the Synthesis of Novel Ceramics
Radiation Curing of Polyvinylsilane as a Precursor for SiC-Based Material
Development of Silicon Carbide Micro-Tube from Precursor Polymer by Radiation Oxidation
Synthesis and Characterization of Carbon-Base Hybrid Ceramics in Coating Form from Thermosetting Resin - Alkoxide Mixtures
Effect of Texture and Structure of Carbon Sources on Synthesis of -SiC Thin Film
Synthesis of Transition Metal Carbide, Carbonitride and Boride Whiskers
First-Principles Calculations of Silicon Nitrides and SiAlONs
Oxynitride Glasses and their Properties - an Overview
Study of Silicon Carbide Material Bonded with Oxide
Effects of SiO2 and Rare-Earth Oxide Additions on Densification and Mechanical Properties of Silicon Carbide Ceramics
Microstructures and Mechanical Properties of Mo5Si3 Particle-Reinforced Si3N4 Composites
Crack-Healing Behavior of Al2O3/SiC Composite Ceramics and the Bending Strength of Crack-Healed Body
Fabrication and High-Temperature Mechanical Properties of SiC-Reinforced C11b/C40 Structured MoSi2 Matrix Composites
Sintering Behavior and Mechanical Properties of Alumina-Coated Zirconia Ceramics
Creep Behavior of SiC Fibers at High Temperatures Using the BSR Method
Fabrication of Two-Dimensional SiC/SiC Composites by Hot-Pressing and their Mechanical, Interfacial and Thermal Properties
Fabrication of Cr3C2-AlN-FeCr Cermet Coating by Combustion Synthesis
Oxidation Properties of Three-Dimensional (3-D) Braided Carbon Fibers Coated with SiC
Recent Advances in Continuous SiC Fibers and their Composites
Characterization of Directionally Solidified B4C-TiB2 and B4C-SiC Eutectic Composites Prepared by Floating-Zone Method
High-Strength and High-Toughness Porous Silicon Nitride for Structural Applications
High-Strength Porous Silicon Nitride Fabricated by Partial Sinter-Forging
Reaction Bonding of Porous Mullite Ceramics
Highly Porous Silicon-Based Ceramics Fabricated with Restrained Sintering by Reaction Bonding (RSRB)
Fabrication of Porous Silicon Nitride and Characterisation of Mechanical Properties
Corrosion of Highly Thermal Conductive AlN Ceramics in Aqueous Solutions
Features and Future Development of the Carbon-Containing Refractory
Nonlinear Finite Element Analysis of Alumina-Magnesia Monolithic Refractory Lining Material
Biaxial Fracture Loci of Isotropic Graphite and their Theoretical Analysis by Series-Parallel Link Model
Damage Resistance and R-Curve Behavior of Laminated SiC/BN Ceramics
Effect of Microstructural Variables on the Erosion of Silicon Nitride Ceramics
Grain Boundary Electronic Structure and High-Temperature Plastic Flow in Polycrystalline Al2O3
High-Temperature Strength of Liquid-Phase-Sintered SiC Ceramics with Oxynitride Glass
Effect of Crack-Healing Process on Fatigue Strength of Si3N4/SiC Ceramics at 1000 DegreesC
Crack-Healing Behavior of Silicon Nitride Ceramics under Cyclic Stress and Resultant Strength at Crack-Healed Temperature
A New Interpretation of Stress Relaxation Behavior in Si3N4 Ceramics
The Role of Grain Morphology in Superplastic Deformation
Damage to Brittle Coating Layer with Compliant Substrate from Concentrated Loads
Wear Properties of SiAlON Ceramics
Application of Focused Ion Beam Miller in Fracture Characterization
Friction Characteristics of C/C Composite Impregnated with Silicon
Microstructure and Mechanical Properties of SiC/Mullite and SiC/ZTM Nanocomposites
Investigation of Fabrication and Properties of Machinable Si3N4/BN Nanocomposite Ceramics
Fabrication and Properties of Al2O3-SiAlON Composites with Nano-Sized t- and h-BN Dispersion
Colloidal Self-Assembly of Ceramics: Interparticle Forces and Structural Control
Dopant Distribution in Microstructure of Nb2O5-Doped SrTiO3 Ceramics
The Control of Intergranular Oxidation Brittleness in Silicon Carbides by Grain Boundary Engineering
Effects of Processing and Doping Elements on the Grain Boundary Microstructure and Mechanical Properties of SiC
Grain Boundary Characters and Structures in Oxide Ceramics
Model Studies of Surfaces and Interfaces in Ceramics
Improvement in High-Temperature Properties of Al2O3 Ceramics by Microstructure and Grain Boundary Control
Study of the Thermal Conductivity of Si3N4 Sintered with CeO2 and MgO Additives
Microstructure and Thermal Conductivity of AlN Ceramic with Eliminated Grain Boundary Phase
Study of Electrical Fatigue of Ferroelectric Ceramics
Development of Textured Bismuth Titanate Piezoelectric Ceramics
Grain-Boundary Structural Transition and Sintering Behavior in Barium Titanate
Variation of Electrical Properties of Sr0.8Bi2+XTa2O9+ Ferroelectric Thin Films with Bismuth Content
Low-Temperature Co-Fired NPO-Type Ceramic Composition for High-Frequency Capacitor Applications
Sintering and Properties of CaO-Al2O3-B2O3-SiO2 System Glass Ceramics
Microstructure of Porous Sr-Doped Lanthanum Manganite Fabricated by Sol-Gel Process
Preparation of Novel Nano-SiO2-Gel Additive and Performance of PEM Fuel Cell
Chemical Modification of Niobium Pentaethoxide with Catechol
Synthesis of Monodispersed ZnO Nanoparticles and their Luminescent Properties
Zinc Oxide Varistor Prepared by Low-Temperature Sintering of ZnO Nano-Powder and its Electrical Properties
Material and CO Sensing Properties of SnO2 Thick Films with Sol Stability Time
Porous TiO2 Photocatalyst Films Prepared from Peroxo Titanic Acid Solution Dispersing Nano-Sized Silicate Layer
Preparation of Ordered Macroporous Ceramic Films Using PMMA Microspheres as Templates
Preparation of Hollow Alumina Microspheres by Mechanofusion and Ultrasonic Spray Pyrolysis
Preparation of Porous Ceramics from Rice Husk Containing Al or Al2O3 Particles for Bioreactor
Chemically Bonded Ceramics as Biomaterials
A Study of Zero Thermal Expansion Ceramics
The Present Status of the Synergy Ceramics Project
Application Examples of Composite Materials
Current Trends in Ceramics for the Lighting Industry
Applications of Aluminum Nitride (AlN) Ceramics
by "Nielsen BookData"
