Materials & process integration for MEMS
Author(s)
Bibliographic Information
Materials & process integration for MEMS
(Microsystems / series editor Stephen D. Senturia, v. 9)
Kluwer Academic Publishers, c2002
- Other Title
-
Materials and process integration for MEMS
Available at 2 libraries
  Aomori
  Iwate
  Miyagi
  Akita
  Yamagata
  Fukushima
  Ibaraki
  Tochigi
  Gunma
  Saitama
  Chiba
  Tokyo
  Kanagawa
  Niigata
  Toyama
  Ishikawa
  Fukui
  Yamanashi
  Nagano
  Gifu
  Shizuoka
  Aichi
  Mie
  Shiga
  Kyoto
  Osaka
  Hyogo
  Nara
  Wakayama
  Tottori
  Shimane
  Okayama
  Hiroshima
  Yamaguchi
  Tokushima
  Kagawa
  Ehime
  Kochi
  Fukuoka
  Saga
  Nagasaki
  Kumamoto
  Oita
  Miyazaki
  Kagoshima
  Okinawa
  Korea
  China
  Thailand
  United Kingdom
  Germany
  Switzerland
  France
  Belgium
  Netherlands
  Sweden
  Norway
  United States of America
Note
Includes bibliographical references and index
Description and Table of Contents
Description
The field of materials and process integration for MEMS research has an extensive past as well as a long and promising future. Researchers, academicians and engineers from around the world are increasingly devoting their efforts on the materials and process integration issues and opportunities in MEMS devices. These efforts are crucial to sustain the long-term growth of the MEMS field. The commercial MEMS community is heavily driven by the push for profitable and sustainable products. In the course of establishing high volume and low-cost production processes, the critical importance of materials properties, behaviors, reliability, reproducibility, and predictability, as well as process integration of compatible materials systems become apparent. Although standard IC fabrication steps, particularly lithographic techniques, are leveraged heavily in the creation of MEMS devices, additional customized and novel micromachining techniques are needed to develop sophisticated MEMS structures. One of the most common techniques is bulk micromachining, by which micromechanical structures are created by etching into the bulk of the substrates with either anisotropic etching with strong alk:ali solution or deep reactive-ion etching (DRIB). The second common technique is surface micromachining, by which planar microstructures are created by sequential deposition and etching of thin films on the surface of the substrate, followed by a fmal removal of sacrificial layers to release suspended structures. Other techniques include deep lithography and plating to create metal structures with high aspect ratios (LIGA), micro electrodischarge machining (J.
Table of Contents
- Contributors. Acknowledgements. Foreword. Preface. 1. Integration of Piezoelectric Pb (ZrxTi1-x)O3 (PZT) Thin Films into Micromachined Sensors and Actuators
- P. Muralt, et al. 2. Porous Silicon as a Sacrificial Layer in Production of Silicon Diaphragms by Precision Grinding
- A. Prochaska, et al. 3. GaAs Cantilever and Bridge Membrane-Like Structures Fully Compatible with AlGaAs/InGaAs/GaAs and InGaP/InGaAs/GaAs Based HFETs
- T. Lalinsky, et al. 4. Magnetron Sputtered TiNiCu Shape Memory Alloy Thin Film for MEMS Applications
- Yongqing Fu, Hejun Du. 5. Chemically Amplified Resist for Micromachining using X-Ray Lithography
- T.L. Tan, et al. 6. Self-Assembled Monolayers (SAM) for Tunneling Sensors
- F.E.H. Tay, et al. 7. Oxidation Process-Optimization for Large Area Silicon Fusion Bonded Devices and MEMS Structures
- K.N. Bhat, et al. 8. Silicon Nanomachining by Scanning Probe Lithography and Anisotropic Wet Etching
- J.T. Sheu, et al. 9. A Novel Bulk Micromachining Method in Gallium Arsenide
- Dong-il 'Dan' Cho, et al.. 10. Deep X-Ray Lithography for MEMS-Photoelectron Exposure of the Upper and Bottom Resist Layers
- V. Kudryashov, P. Lee. 11. Spray Coating Technology of Photoresist/Polymer for 3-D Patterning and Interconnect
- A.B. Suriadi, et al. 12. Uncooled Infrared Image Sensor of Dielectric Bolometer Mode using Ferroelectric BST Thin Film Prepared by Metal Organic Decomposition
- Hong Zhu, et al. 13. Tactical Grade MEMS Gyroscopes Fabricated by the SBM Process
- Dong-il 'Dan' Cho, et al. 14. Plasma Etching Techniques to Form High-Aspect-Ratio MEMS Structures
- Won Jong Yoo, et al. Index.
by "Nielsen BookData"