Progress in advanced materials and processes, YUCOMAT V : proceedings of the fifth Yugoslav Materials Research Society, held at Herceg - Novi, Serbia and Montenegro, September 15-19, 2003
Author(s)
Bibliographic Information
Progress in advanced materials and processes, YUCOMAT V : proceedings of the fifth Yugoslav Materials Research Society, held at Herceg - Novi, Serbia and Montenegro, September 15-19, 2003
(Materials science forum, v. 453-454)
Trans Tech Publications, c2004
- Other Title
-
YUCOMAT 5
Available at / 2 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical refernces and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
These proceedings, PROGRESS IN ADVANCED MATERIALS AND PROCESSES, include selected papers which were presented at the Fifth Yugoslav Materials Research Society Conference (Yu-MRS Meeting), held in Herceg Novi, Yugoslavia, September 15-19th, 2003. The previous four conferences were also held there, and the Yugoslav Materials Research Society was formed as a non-governmental, non-profit, scientific association, whose main goals and tasks are to encourage creativity in materials science and engineering, to achieve the harmonic coordination of these fields in Serbia and Montenegro, and to link these researches to analogous activities carried out worldwide; in order to incorporate them into international - even global - programs. Materials science and engineering involve the acquisition of knowledge concerning the synthesis and processing of materials, their composition and structure, properties and behaviour, characteristics and potential, and their application in devices, machines, consumer units and other finished products. Our economic prosperity, quality of life and hopes for a healthy environment are closely connected with improvements in existing products and the development of new ones together with their associated processing technologies.
Table of Contents
Towards SiGe Terahertz VCSELs
Comparison of Direct Numerical Procedure and Monte Carlo Technique to Determine the Charging Effects in Submicron Structures
Data Bases for Modeling Plasma Devices for Processing of Integrated Circuits
Optimization of Intersubband Optical Nonlinearities in Continually Graded AlGaN Quantum Well Structures
Surface Density Analytical Model of Two-Dimensional Electron Gas in HEMT Structures
Thermodynamics of Mechanical Oscillations in Superlattices
Study of the Increased Temperature Influence on the Degradation of the Photodetectors through Ideality Factor
Metal-Induced Crystallization of Polycrystalline Silicon by In-Situ Excimer Laser Annealing During Low-Pressure CVD Growth
Applications of ZrO2 - CeO2 - La2O3 Films in Multilayered Oxide Heterostructures
The Effect of Various Parameters on the Structure of W-Ti Thin Films
Plasma Oxidation of Salt Bath Nitrided C 15 Steel Samples
Vortex Phases in Bi2Sr2CaCu2O8+ Single Crystals in Tilted Magnetic Fields
Structure Prediction of Solids: Heuristic Algorithms for Local Optimization on Hartree-Fock Level
Dispersion of Refractive Index of Non-Crystalline Chalcogenides in Cu-As-Se System
Oxidation State of Copper Ions in ZSM-5 Zeolite
Influence of Annealing on Structure and Magnetic Properties of Laves Phase HfFe2
Site Occupation Preferences in Multicomponent Semiconductors: The Cd1-xZnxTe Case
Structural Properties of Pb1-xMnxTe Alloys
Body Ni-Doped Glassy Carbon: Physical and Electrochemical Characterization
Apparent Enthalpies of Activation for Oxygen Reduction at Pt3Co Electrode in Alkaline Solution
Underpotential Temperature Dependence Deposition of Hydrogen on MoPt3 Alloy in Acid Solution
Study of Supported Pt and PtRu Catalysts in Methanol and Formic Acid Oxidation
Corrosion of Ti3SiC2 and Ti4AlN3 in Concentrated HCl Solutions
The Influence of Oxide Sol Properties on the Capacitive Behaviour of Carbon Supported Hydrous Ruthenium Oxide
Electrochemical Polymerization of 2- Methyl-1- Naphthylamine in an Acidic Perchlorate Aqueous Medium
Electrolytic Hydrogenation of Glucose on Amalgamated Zinc in Sulphate Solutions
Thermal and Conductivity Analyses of Alkaline Earth Salts of 12-Tungstophosphoric Acid
Physicochemical Properties of Al-Pillared Montmorillonite Doped with 12-Tungstophosphoric Acid
Surface Composition and Adsorption Properties of Activated Carbon Cloth
TiAl - A New High Temperature Material for Turbocharger Rotors
The Influence of Microstructure on Ductile Fracture Initiation in Low-Alloyed Steel
Fracture Toughness Modeling in High-Strength Al-Based Alloys
Aging Effects in Cu-Zn-Al Shape Memory Alloy
DSC Investigation of High-Copper AlCuMg Alloys
Dimethyldichlorosilane Hydrolysate as a Substitute for Cyclic Monomers in the Preparation of Functional Poly(siloxane)s
Microstructure and Hydrogen Desorption in Nanostructured MgH2-Fe
Synthesis of Carbon Nanostructures with Mechanical Alloying
Microemulsion Synthesis of MnZn-Ferrite Nanoparticles
Synthesis of Nanocrystalline Nickel-Zinc Ferrites via a Microemulsion Route
Crucial Role of Alkyl-Substituted Benzenes in the Formation of Intercalate Derivatives of C60
Laser Induced Synthesis of Ultrafine Anatase TiO2 Powders
n-Alkane Nanoparticles in Cryogenic Trichlorofluoromethane/n-Alkane Systems: Their Use in the Study of the -Basicity of n-Alkanes
Characterization of Nanoporous Lanthanide-Doped YAG Powders Obtained by Propellant Synthesis
Introduction of Pt and Pd Nanoclusters in Zeolite Cavities by Thermal Degradation of Acetylacetonates
EPR Study of Manganese in Cd1-xMnxS Quantum Dots
Raman/ Rayleigh Study of Nanophases
Optical Diagnostics of Carbon Arc and Induction Plasmas
Thermal Diffusivity of Cold Sintered Co
Photoacoustic Properties of Single Crystal NiO
Far-Infrared Phonon Spectroscopy of Cd1-xMnxS Quantum Dots
Raman Spectroscopy of Polycrystalline - MnSe
Sorption Mechanisms and Sorption Models
New Method of Porous Oxide Synthesis: Alumina and Alumina Based Compounds
Aging of a Commercial Al-Cu-Si Based Alloy Modified with Germanium
Modeling of Electrophoretic Deposition of Oxides on C/C-SiC-Composites
Electrophoretic Deposition of Thin SOFC-Electrolyte Films on Porous La0,75Sr0,2MnO3- Cathodes
Sol-Gel Route for Electrophoretic Deposition of Mullite Diffusion Barriers on C/C-SiC Composites
Electrophoretic Deposition of Boehmite Coatings on Titanium from Aqueous Sols
Modification of Carbon Cloth by Interaction with Pulsed TEA CO2 Laser
The Influence of the Solid/Liquid Ratio on the Point of Zero Charge of Alumina
Synthesis, Preparation and Properties of New Fe-Based Soft Magnetic Amorphous Alloys with a Large Supercooled Liquid Region
Crystallization Kinetics of Fe-B Based Amorphous Alloys Studied In Situ by X-Ray Diffraction and Differential Scanning Calorimetry
Investigation of Magnetic Susceptibility in an Amorphous Fe43,2Ni23,2Co13,6B20 System
Properties of LiMn2O4 Powders Obtained by Ultrasonic Spray Pyrolysis
The Effect of Reversing Current on the Properties of Copper and Electrolytic Copper Powder. I. The Morphology of Powder Particles
The Effect of Reversing Current on the Properties of Copper and Electrolytic Copper Powder. II. The Apparent Density and Flowability of Powders
Nicolson-Ross Analysis of Absorption Coefficients of Nickel and Nickel-Zinc Ferrite Powders Prepared Using a Novel Method
Hydrogen Absorption and Desorption Kinetics in Nickel and Cobalt Alloy Powder
Mechanochemical Activation in Synthesis of LaTi0.5Mg0.5O3 Perovskite-Type Oxides
The Influence of Mechanical Activation on the Stoichiometry and Defect Structure of a Sintered ZnO-Cr2O3 System
Mechanochemical Synthesis of CaTiO3 from CaCO3 - TiO2 Mixture
Enhancing Synthesis and Sintering of Zinc Titanate Using Mechanical Activation
A Phenomenological Analysis of Sintering Kinetics of Alumina
Phase Evolution of Si3N4 Ceramic with Additives from Li2O-Y2O3
DPR Analysis of Microstructural Evolution of ZnO Ceramics
Screen Printed BaTi1-xSnxO3 Multilayer Materials
Effects of Stacking Sequence on the Strength of Cross-Ply and Quasi-Isotropic Carbon/Epoxy Laminates
Scratch and Abrasion Resistant Polymeric Nanocomposites - Preparation, Characterization and Applications
Characterization of Cold-Rolled Cu-Nb Composite
Chain Conformational Statistics and Mechanical Properties of Elastomer Composites
Increased Stability of C/C-Composite towards Catalytic Oxidation
Fatigue Damage Detection in Composite Rods Using Fiber Optic Intensity Based Sensors
The Effect of Polar Aluminium Trihydrate Molecules on the Dielectric Relaxations of Low-Density Polyethylene
The Effect of Nucleants on the Crystallization Behavior of Isotactic Polypropylene
Effects of Structure Characteristics on Mechanical Properties of Aluminum Alloy Matrix Composites
Polymer Conformational Transitions: A Quantum Decoherence Theory Approach
Gibbson: Peptide Plane as a Unique Biological Nanostructure
Preparation and Properties of Polymeric and Composite Bioresorbable Barrier Membranes
An Investigation of the Dehydration of Superabsorbing Polyacrylic Hydrogels
Cell Support Studies Aimed for Cartilage Tissue Engineering in Perfused Bioreactors
Hydroxyapatite as a Root Canal System Filling Material: Cytotoxicity Testing
In Vitro and In Vivo Investigation of Collagen - C60(OH)24 Interaction
Investigation of Thermal Stability and Kinetic Studies of Transition Metal Complexes with the Condensation Product of 2,6-Diacetylpyridine and Semioxamazide
by "Nielsen BookData"