Functionally graded materials VIII : proceedings of the 8th International Symposium on Multifunctional and Functionally Graded Materials (FGM2004) : held in Leuven, Belgium, 11-14 July 2004

著者

書誌事項

Functionally graded materials VIII : proceedings of the 8th International Symposium on Multifunctional and Functionally Graded Materials (FGM2004) : held in Leuven, Belgium, 11-14 July 2004

edited by Omer Van der Biest, Michael Gasik, Jozef Vleugels

（Materials science forum, v. 492-493）

Trans Tech Publications , Distributed by Trans Tech Publications Inc., c2005

タイトル別名

FGM2004

大学図書館所蔵 件 / 全1件

この図書・雑誌をさがす

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Multifunctional materials are composite systems that exhibit useful responses to electrical, optical, magnetic and/or mechanical stimuli. They allow the compact and economic integration of two or more functions; which can be mechanical, biological, acoustic, thermal, electrical, magnetic, optical or sensory in nature. Functionally graded materials (FGM) are also multi-functional materials, which exhibit spatial variations in composition and/or microstructure; created with the specific purpose of controlling variations in thermal, structural or functional properties. In spite of large differences in the type and size scale of the materials considered, many common features exist, thus furnishing a rationale for grouping these materials together in one book.

目次

  • Testing and Characterization of Ceramic Thermal Barrier Coatings Optimisation of FGM TBC and Their Thermal Cycling Stability Design and Fabrication of ZrO2/Stainless Steel Thermal Barrier Coating FGM Advanced High Temperature Turbine Seals Materials and Designs Electrically Conductive and Wear Resistant Si3N4-Based Composites with TiC0.5N0.5 Particles for Electrical Discharge Machining Wear Mechanisms in Functionally Graded Aluminium Matrix Composites: Effect of the Presence of an Aqueous Solution Functional and Structural Characteristics of Metallic Foams Produced by the SlipReactionFoamSintering (SRFS)-Process The Effect of Grinding Residual Stresses on Contact Loading Strength Degradation in Y-TZP with Different Microstructures Electrodeposition of Gradient Layers for Improved Impact Load Resistance Local Graded Structure in 6.5wt%Si-Fe Alloy and the Effect on Ductility Functionally Graded TiC-Based Cermets via Combustion Synthesis and Quasi-Isostatic Pressing Fabrication of Al2O3-ZrO2~Ni Functionally Graded Pipes A New Functional Material
  • Photonic Fractal Synthesis of Nano ITO Powders Prepared by Solvothermal Process Effective Permittivity of Composite with Core-Shell Type Inclusions by Self-Consistent Method Infrared to Visible Upconversion Luminescence in Yb3+, Ho3+: Y2O3 Nanocrystalline Powders Co-Precipitation Processing of Nanosized (Y,Gd)2O3: Eu Powder and Its Enhanced X-Ray Excited Luminescence Ferroelectric Ceramics Related to BaTiO3 for Z5U Multilayer Capacitors Molecular Organization of Nonlinear Organic Films Laminated by Langmuir-Blodgett Method Properties of Cu-W Functionally Graded Materials Produced by Segregation and Infiltration Influence of Dynamic Compaction on Structure and Mechanical Strength of Composite Spinel-Based (LiMn2O4, Li4Ti5O12) Foil Electrodes Recent Development in Nano and Graded Thermoelectric Materials Thermoelectric Properties of Poly(3-Alkylthiophenes) Power Evaluation of PbTe with Continuous Carrier Concentration Gradient Development of Thermoelectric Cooling Devices with Graded Structure Multifunctional Applications of Thin Film Li Polymer Battery Cells Feasibility Study of FGM Technology in Space Solar Power Systems (SSPS) Manufacturing of Structured TiO2-Surfaces for Cell Carrier Application Effects of the Thermal Residual Stress Field on the Crack Propagation in Graded Alumina/Zirconia Ceramics Structure of Dental Resin-Based Adhesive Materials Evaluation of Corrosion Resistance of Multi-Layered Ti/Glass-Ceramic Interfaces by Electrochemical Impedance Spectroscopy Development of Multifunctional Materials (MFM): Bioabsorbable Drug-Releasing Hard Tissue Fixation Screws Neutron Diffraction Studies of Functionally Graded Alumina/Zirconia Ceramics Densification of Step-Graded Al2O3-Al2O3/ZrO2 Composites Electrophoretic Deposition as a Novel Near Net Shaping Technique for Functionally Graded Biomaterials Degradable, Multifunctional Polymeric Biomaterials with Shape-Memory Micro-Arc Nitriding of Titanium Surface Micro-Structural Characterization and Stress-Corrosion Cracking Behavior of a FGM Glass-Based Coating on Ti6Al4V for Biomedical Applications A Process for Sintering of Diopside Prepared from Dolomite Effect of Stabilised ZrO2, Al2O3 and TiO2 on Sintering of Hydroxyapatite Development of Multifunctional NOx-Catalysts and -Sensors The Use of Functionally Graded Poly-SiGe Layers for MEMS Applications Full Form of the Near Tip Field for the Interface Crack between a Piezoelectric Material and a Thin Electrode Head-On Immobilization of DNA Fragments on CVD-Diamond Layers Stacking of Bi2Te3 and FeSi2 for Thermoelectric Applications Control of Grading Structure and Thermal Conductivity of Wood by Compressing Process Effects of Seeding on the Formation of Large NaX Zeolite Crystals Mechanical Properties of TiO2-Kaolin FGM Produced by Progressive Lamination Method for NOx Reduction Ceramic Foams Coated with Zeolite Crystals Corrosion Resistance of Homogeneous and FGM Coatings TiO2 Based Films Prepared by Sol-Gel Method for Advanced Water Treatment Synthesis and Characterization of NaX Molecular Sieve Zeolite Films on Ceramic Paper for Membranes Effects of Annealing Condition on the Preparation of Indium-Tin Oxide (ITO) Thin Films via Sol-Gel Spin Coating Process The Synthesis of Indium Tin Oxide Nano - Powders by Solvothermal Process Indentation of AlN/CrN Multilayers from Room Temperature to 400 DegreesC Fabrication of Nanostructure Composites in Functionally Graded Coatings with Supersonic Free-Jet PVD Functionally Graded Coatings of Carbon Reinforced Carbon by Physical and Chemical Vapour Deposition (PVD and CVD) Interaction between Ti-6%Al-4%V Alloys and Hardmetals Coated by Cathodic-Arc Technology New Multifunctional FGM Coatings Produced Using ESA and TRESS Methods A Simple Galerkin Boundary Element Method for Three-Dimensional Crack Problems in Functionally Graded Materials Three Dimensional Fracture Analysis of FGM Coatings Time-Dependent Behavior and Fracture of Functionally Graded Thermal Barrier Coatings under Thermal Shock Fracture Analysis of Functionally Graded Thermal Barrier Coating with Interface Crack by Computational Micromechanics Method A Multiscale Framework for Elastic Deformation of Functionally Graded Composites Interaction between an Embedded Crack and an Interface Crack in Nonhomogeneous Coating System On Accurate Numerical Evaluation of Stress Intensity Factors and T-Stress in Functionally Graded Materials Mixed-Mode Crack Propagation in Functionally Graded Materials Machining FGM: Residual Stresses Redistribution Finite Element Simulation of Microstresses in a Traditional FGM: The Case of Soft Tribo-Alloys Thermo-Mechanical Analysis of RLV Thrust Cell Liners with Homogeneous and Graded Coatings Design of Functionally Graded Structures Using Topology Optimization Optimization of Material Composition of FGM Coating under Steady Heat Flux Loading by Micro-Genetic Algorithms Dynamic Fracture of Functionally Graded Composites Using an Intrinsic Cohesive Zone Model The Optimization of Propagation Characteristic of Elastic Wave in FGM Numerical Simulation of a Centrifugal Process to Fabricate Permittivity Graded FGM from Alumina/Epoxy Mixture Numerical Simulation of Laser Induced Modification Processes of Ceramic Substrates Design Model and Prediction Model on Preparation of Functionally Graded Material by Co-Sedimentation Stress Analysis of Powder Compacts with Graded Structures in Sintering Process Computer-Integrated Safe Design of FGM Component for Hip Replacement Prosthesis Optimal Design of Graded Materials in 3-D Heat Transfer Creep Response of Ceramic/Metal Functionally Graded Thermal Barrier Coating Fabrication of Permittivity Graded Epoxy Resin with Non-Uniform Dispersion of Alumina Fillers by a Centrifugal Procedure Modeling of Segmented Peltier Cooling with Discrete and Continuous Concentration Function The Propagation Characteristic of Viscous-Plastic Wave in Functionally Graded Layer Thermodynamics and Microstructure of Co-V8C7 Alloy Tribolayer Formation as a Functionally Self-Grading Process in Soft Anti-Friction Alloys Precipitation in Plasma Nitrided Fe-M(M=Ti, V, Al) Alloys Appraisement of Creep Properties of 12Cr1MoV Steel by Small Punch Creep Test Method Effective Thermal Conductivity of MoSi2/SiC Composites The Correlation between Hardness and Yield Strength of Hard Materials Using the Image Analysis Program for Prediction of Thermal Stability Behavior of Refractory Specimen Thermal Transport Properties of Stainless Steel/Zirconia Compacts as a Function of Composition and Temperature Fracture and Fatigue Crack Propagation in Graded Composites Strength Distributions in Ceramic Laminates Seebeck Scanning Microprobe for Thermoelectric FGM Investigation of Nano-Size TiO2 Powders: Structure and Particle Size Aspects Creep Property of Functionally Graded Materials Fabrication and Mechanical Properties of TZ-3Y20A /Mo Multilayer Composites Particle Distribution and Orientation in Al-Al3Zr and Al-Al3Ti FGMs Produced by the Centrifugal Method Regularities of Composite Materials with Micrograded Grain Structure Formation Evaluation of SiC-Particle Connectivity in Functionally Graded Al/SiCp Composites by Synchrotron Radiation Holographic Microtomography Electron-Probe Microanalysis: Some Revelations in the Investigation of Defects in Steel Products Certified Reference Materials for the Characterisation of Multifunctional Materials Stress Relaxation on Polished Cross-Sections of Al2O3/ZrO2 FGM Discs Measured by Raman Spectroscopy Experimental Characterization and Computational Simulation of Glass-Alumina Functionally Graded Surfaces Determining the Elastic Moduli of the Individual Component Layers of Cylindrical Thermal Barrier Coatings by Means of a Mixed Numerical - Experimental Technique Polyimide Surface Modification by Low Energy Ion Beam Irradiation Microstructure of Al2O3-Fe FGM Obtained by Modified Slip-Casting Method Layered Boron Carbide-Aluminum Composites with Large Changes in Microstructure Steel Parts with Tailored Material Gradients by 3D-Printing Using Nano-Particulate Ink Combustion Synthesis of Dense Functionally Graded B4C Reinforced Composites Formation of Compositional Gradient during Fabrication of FGMs by a Centrifugal In Situ Method Toughness Enhancement of Al2O3/Ce-TZP Functionally Graded Materials by Annealing in Inert Atmosphere Processing of a Graded Ceramic Cutting Tool in the Al2O3-ZrO2-Ti(C,N) System by Electrophoretic Deposition Development of Square-Shaped Large-Size WC/Co/Ni System FGM Fabricated by Spark Plasma Sintering (SPS) Method and Its Industrial Applications Strong Localization of Electromagnetic Wave in Epoxy/Ceramic Photonic Fractals with Mengersponge Structure Fabricated by Stereolithography Sintering Behavior of Multimodal Ceria Powder Mixtures for Fuel Cell Applications Synthesis and Characterization of Large NaX Zeolite Crystals by Continuous Crystallization Graded Microstructure at Fiber / Copper Matrix Interface in FRM Fabricated by the Reaction at Narrow Holes Method Effect of Microwave Heating on the Synthesis of Layered Double Hydroxide Preparing 3D Functional Gradients for SLS Fabrication and Characterization of Porous Alumina Tube with Pore Gradient Technology of Low Cost Production of FGMs Porous Graded Materials by Stacked Metal Powder Hot-Press Moulding Joining of OFC to TC4 and Structural Control of Joint Interface Suspension Development for Colloidal Shaping of Al2O3-ZrO2 FGMs Influence of Al2O3 Addition on the Microstructure and Mechanical Properties of Pressureless Sintered Ce-TZP

「Nielsen BookData」 より

関連文献： 1件中  1-1を表示

詳細情報

ページトップへ