Advanced materials processing II : proceedings of the 2nd International Conference on Advanced Materials Processing, Grand Hyatt, Singapore, 2nd-4th December 2002
著者
書誌事項
Advanced materials processing II : proceedings of the 2nd International Conference on Advanced Materials Processing, Grand Hyatt, Singapore, 2nd-4th December 2002
（Materials science forum, v. 437-438）
Trans Tech Publications, c2003
- タイトル別名
-
Proceedings of the 2nd International Conference on Advanced Materials Processing
Advanced materials processing 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and index
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This book presents the proceedings of the second International Conference on Advanced Materials Processing (ICAMP 2002). The papers read during the conference are included here in full-length form. They comprise 2 keynote addresses, 9 invited papers and over 130 oral presentations, by delegates from more than 20 countries.
目次
- The Alchemy of Today: Functioning of Traditional Ceramics Utilizing Nanostructure Cost Effective Synthesis, Processing and Applications of Light-Weight Metallic Materials Low-Cost Deposition of Highly-Conducting Indium-Tin-Oxide Transparent Films by Chemical Process
- Spray CVD and Dip Coating Magneto-Sensitive Dielectric Permeability in Nano-Composite Ferromagnetic Oxide Films Prepared by RF-Sputtering Preparation of LaNiO3 Thin Film Electrode Grown by Pulsed Laser Deposition Mechanical Properties of Sputtered TiNiCu Shape Memory Alloy Thin Films Structure and Properties of TiN/TiAlSiN/TiN PVD Coatings on Cemented Carbides and Cermets Dimensional and Microstructural Dependence of the Magnetic Properties of Electrodeposited Co(P) Nanowire Arrays Tribological Properties of Plasma Sprayed Fe3Al-Al2O3 Graded Coatings Effect of Nanocrystalline Electroplating of NiFe on the Material Permeability Effect of pH Values on Magnetic Properties of Electroplated NiFe Layers Effect of Current Density on the Magnetic Properties of Electroplated NiFe Layers Effects of Sonication on the Crystal Orientation of Electrodeposited Palladium Film from Ammonia Bath Surface-Layer's Structure of X40CrMoV5-1 Steel Remelted and/or WC Alloyed with HPDL Laser Improvement of Tensile Strength of CVD SiC Fiber Plasma Spray Fe3Al-Al2O3 Graded Coatings Improved Affinity to Metallization of Graphite/Polymer Composites by Oxygen Plasma Treatment Fully Integrated Hybrid Polymeric Carbon Nanotube Composites Equal Channel Angular Pressing of Metallic Powders Structure and Properties of Nanocrystalline Composite Materials The Origin of High Strength and High Ductility in Nanostructured Mg-5%Al-x%Nd Alloys Microstructure and Mechanical Properties of a Mg-5AI Alloy Synthesized by Mechanical Alloying Influence of High Energy Ball Milling on the Carbothermic Reduction of Ilmenite A Newly Devised Single Shear Test for Metal Powder Compact Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys High Energy Impact Resistance of Sb-Sn Lead-Free SMT Joint Optimising Gas-Assisted Injection Moulding Process Using the Taguchi Method Process Stability and Capability Studies of Polymer Micro Moulding Process Investigation on Thermal Debinding of Powder Injection Molding Structure and Properties of the Heat-Treated High-Speed Steel HS6-5-2 and HS12-1-5-5 Produced by Powder Injection Molding Process Thermal Treatment of M2 High-Speed Steel Powder for Rapid Tooling Applications In Situ Synthesis, a Alternative Way to Produce Materials? Effect of Alloying Elements on the Mechanical Properties of Cu-15%Cr In Situ Composites Reactive Products of Carbothermic Reduction of Ilmenite in Mixed Air for Iron-Based Ti(C,N) Composite Development of an AZ91A/Cu Hybrid Composite with Improved Mechanical Properties Using the Novel Technique of Disintegrated Melt Deposition Synthesis of Al/TiCp Based Functionally Gradient Materials Using the Novel Technique of Gradient Slurry Disintegration and Deposition: Effect of Particulates Feed Rate Fabrication of Ti/TiC/SUS304 Laminated Composite through Concurrent Combustion Synthesis and Diffusion Bonding Processing Metal-Matrix Composites for Superplastic Properties Al-SiCp Composites by Underwater Shock Compression Effect of Powder Characteristics on Microstructural Development in Bodies Produced by Pressureless Sintering of AI/TiO2 Composite Powder Preparation and Properties of Iron Oxide Nanoparticles in a Na-Y Zeolite Matrix Aging Characteristics of ICA for SMD on Flex Study of the Reinforcement Percentage of Mg-Al-SiC MMC in Relation to the Mechanical Properties and Machinability Investigations into Erosion Wear Performance of Functionally Graded Chromium Oxide - Alumina Titania Ceramic Composite Deposits Oxide and Nitride Thin Films: Processing and Characterization Precision Thickness Measurement of Ultra-Thin Films via XPS Properties of PVD Coatings on a Brass Substrate The Effect of Annealing in High Vacuum on the Oxidation and Photoluminescence of Zinc/Silicon Nanoparticles in Thin Films Environmental Effects on the Frictional Behaviour of an Unhydrogenated Diamond-Like Carbon Coating A Study of the Corrosion Resistance of Electroplated Nanocrystalline and Polycrystalline Nickel Coatings A Study on the Hot Working of Al/SiC Composites - Part I A Study on the Hot Working of Al/SiC Composites - Part II Modeling of Secondary Processing Parameters of 6061-AlSiCp Composite Formability Analysis of Al/15% SiCp Composites Preparation and Characterization of PMMA-Based Transparent Solid Polymer Electrolyte with Li Imide and Li Triflate Rotational Moulding of Particulate Reinforced Polymeric Shell Structures Thermal Conductivity, Thermo-Mechanical and Rheological Studies of Boron Nitride-Filled Polybutylene Terephthalate Advanced Materials Processing with Infrared Selective Laser Melting of Li2O.Al2O3.SiO2 (LAS) Glass Powders Two Novel Techniques for Forming Regularly Spaced Deep Recesses on Aluminium Sheet Panels Microstructure Analysis of Pd/CeO2 Mixed Oxides Prepared by Deposition-Precipitation Method A Modified Explosive Welding Technique Using Regulated Underwater Shock Wave Effect of Heat Treatment on Structure and Properties of Experimental Hot-Work Tool Steel 47CrMoWVTiCeZr16-26-8 Effect of Additives on Sinterability and Densification of Laser-Sintered Metal Powder Formation of Copper-Based Metal Part via Direct Laser Sintering Studies of Femtosecond Laser-Processed Nitinol The Effect of Nd: YAG Laser Irradiation on the Microstructure of Human Dentin A Study on the Prediction of Process Parameters in the Gas Metal Arc Welding of Mild Steel Using the Taguchi Method Zeolite Catalyst Synthesis: Characterization and Their Catalytic Activity for Reduction of Gasoline Exhaust Gases Reactive Sintering of Nickel Aluminide and its Magnetic Responses Sintering and Mechanical Properties of Titanium-Based Metal-Ceramic Composites Produced from Reduction of Titanium Dioxide Laser Reactive Formation of Ti/TiN In Situ Composite Synthesis and Characterization of Magnesium Based Composites Containing Metallic Particulates as Reinforcement The Fracture Problem of Matrix Crack for Metallic Materials A Study on Explosively Clad Al-SS-Al Fiber-Reinforced Metal Composites Wear and Corrosion Behaviour of Al6061-TiO2 Composites Development of Low-Carbon Cold-Rolled Steel Sheets for Enameling Application Performance Evaluation of Treated Grinding Wheels A Study of Pin Joints in Composite Laminated Structures Organic-Acid-Based Chemical Polishing Solutions for Fe Alloys Isothermal Rheological Forming of High-Strength Alloying Part with Complicated Curved Surface Shear-Induced Particle Migration in Suspension in a Capillary Pressurized Driven Circular Tube Flow Particularity Concerning the Use of Nanomagnetic Fluids and the Magnetic Field, to Enhance the Production of Composit Parts Components Made by RTM - MNF Lubricity of Volatile Lubricants in Ironing Process Modelling Mechanical Properties of Nanocrystalline Copper Simulation of Czochralski Crystal Growth by Using Lattice Boltzmann Method Application of Neural Networks for Prediction of Hardness and Volume Fractions of Structural Components in Constructional Steels Cooled from the Austenitizing Temperature Modelling of Explosive Cladding of LCS-Al Plates Using Artificial Neural Network Web-Based Forging Simulation and Virtual Workshop Experimental Modelling of Cutting Forces as a Function of Tool Wear in End Milling The Modeling of the Solute Redistribution during the Solidification of Ternary Alloys Finite Element Analysis of Hot Embossing of Polymer Optical Sheet Modelling of Process Parameters in P/M Copper Extrusion for Solid Preforms Finite Element Simulation of Axisymmetrical Tube Hydroforming Processes A Discussion of the Dynamic Specific Heat during Solidification Finite Element Analysis of Fastener Joints in Metallic and Orthotropic Structures On the Processing of Nanostructured Ceramics The Role of nc-TiN Surface Coverage by a-Si3N4 for the Control of Room Temperature and In-Dry-Air Oxidation Resistance of nc-TiN/a-Si3N4/a- and nc-TiSi2 Nanocomposites Metastable Phase Formation in Rapidly Solidified ZrO2-Al2O3 Powders Synthesis of Ceramic Compounds Utilizing Woody Waste Materials and Rice Husk Rapid Manufacturing of Y-TZP Ceramic Punch Using Powder Injection Moulding Technology Organic-Inorganic Nanocomposites with Core-Shell Structure Via Sol-Gel Process Processing and Property Assessment of Porous Alumina and Mullite-Alumina Ceramics The Influence of Process Parameters on Forged Magnesium Alloys Investigation on Microstructure of Magnesium AZ91HP Alloy for Semi-Solid Forming Evaluation on the Formability of Magnesium Alloy AZ31 Effect of Compaction Parameters on the Properties of P/M Aluminium Preforms Microstructure of Composite Cementation Layer on Two-Phase TiAl-Based Alloy and Its Effects on Oxidation Resistance Wear of Magnesium Composites with Continuous, Interconnected Wire Reinforcement Mechanical Properties and Fracture Behaviour of TixAly(O)/Al2O3 Composites Effects of Additional Rolling and Annealing on the Cube Texture in the High-Purity Aluminum Foils for Capacitors The Use of Modern Microscopic Techniques in Evaluation of Polyphthalamide and Polybutylene Terephthalate Injection Moulded Parts for Electroless Plating The Strain Measurement in Spot Welded Joints Using the ESPI Method Diamond-Like Carbon Films for Electrochemical Sensor Preparation and Thermoelectric Properties of Melt-Spun Fe2Si5 Based Alloys Influence of Process Parameters on Reaction Products during Self-Propagating High-Temperature Synthesis of Porous NiTi Study of the Parameters of Electroplating of Ferromagnetic Materials in Relation to Material Permeability Doping and Grain-Size Effects on Ferroelectric and Mechanical Properties of PZT Ceramics Electrophoretic Deposition and Characterization of a FGM Piezoelectric Monomorph Actuator Study of Piezoelectric Tubular Transducers Magnetic Properties Study of Coal Oxidation Process Formation and Characterization of Self-Ordered Ferromagnetic Nanowires by AC Electroforming Surface Finish and Residual Stresses in Facing of Age-Hardened INCONEL 718 Modification of Torsional Characteristics of Workpiece Drive System in Cylindrical Grinding
「Nielsen BookData」 より