High temperature corrosion and protection of materials 6 : proceedings of the 6th International Symposium on High Temperature Corrosion and Protection of Materials High temperature corrosion and protection of materials 6 : actes du 6ème Colloque International sur la Corrosion et la Protection des Matériaux à Haute Température : Les Embiez, France, May 16-21, 2004

著者

• International Symposium on High Temperature Corrosion and Protection of Materials
• Steinmetz, Pierre
• Université Henri Poincaré
• European Federation of Corrosion

書誌事項

High temperature corrosion and protection of materials 6 : proceedings of the 6th International Symposium on High Temperature Corrosion and Protection of Materials = High temperature corrosion and protection of materials 6 : actes du 6ème Colloque International sur la Corrosion et la Protection des Matériaux à Haute Température : Les Embiez, France, May 16-21, 2004

edited by Pierre Steinmetz ... [et al.] ; symposium jointly organized and co-sponsored by Université Henri Poincaré ... [et al.] ; under the auspices of the European Federation of Corrosion

（Materials science forum, v. 461-464）

Trans Tech Publications, c2004

• set
• v. 1
• v. 2

タイトル別名

High temperature corrosion and protection of materuals six

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The major concern of this book is high-temperature corrosion; a form of surface disintegration that leads to high running costs, as well as to environmental and/or security problems.

目次

A Brief History of the 'Les Embiez HTC Symposia' Kinetic Study of the Oxidation by Oxygen of a Zirconium Based Alloy: ZrNbO Differences between the Pre- and Post-Transition Stages Internal Precipitation of Al2O3 and Cr2O3 in Austenitic Alloys Recent Improvements in the Understanding of Alumina Film Formation and Durability Internal Nitridation during Creep Loading of Polycrystalline Ni-Base Superalloys Relation Between Oxidation Kinetics and Chromium Diffusion in Stainless Steels Role of Minor Element Addition in the Formation of Thermally Grown Alumina Scales Kinetic Investigations on Salt Melt Induced High-Temperature Corrosion of Pure Metals Effects of Titanium on a Ferritic Steel Oxidation at 950 DegreesC Yttrium Implantation and Additional Element Effects on the Oxidation Behaviour of Reference Steels at 973 K Presentation, Calibration and First Experiments Using a New Thermobalance for Experiments in Sulfur Vapor Atmospheres X-Ray Diffraction to Study the Oxidation Mechanism of Chromium at Elevated Temperatures Study of the Sulfur Segregation for a TBC System Is KCl(g) Corrosive at Temperatures Above its Dew Point? Influence of KCl(g) on Initial Stages of the High Temperature Corrosion of 11% Cr Steel at 600 DegreesC The Effect of Silicon Addition on the High Temperature Oxidation of a Fe-Cr Alloy Experimental Study of the Interactions between Oxidation and Structural Defects Influence of Temperature and Composition of SO2/O2 Atmosphere on the Surface Morphology of Alumina Scales Formed on FeCrAl Steel Modelling of the Kinetic Transition in Zirconium Based Alloys: Application to the Oxidation of Zircaloy-4 by Water Vapour Computer Simulation of Morphology Evolution of Oxide Scales during Oxidation Effect of Nanocrystallization on Hot Corrosion Behavior of K38G Alloy with Sulfate Deposit at 900 DegreesC First Principle Calculation of Oxidation of Metals High Temperature Oxidation of Fe-3Si Alloy A New Interpretation of the ''Breakaway'' Oxidation Behaviour Observed at High Temperature on 304 Stainless Steel Nano-Oxidation of Cu(100) Investigated by In situ UHV-TEM Environmental Protection of Metal Structures at High Temperature: State of the Art and Future Trends Effects of Platinum on the Interdiffusion and Oxidation Behavior of Ni-Al-Based Alloys Environmental and Thermal Protection of -TiAl Alloys Investigation of Oxide Formation during Short-Term Oxidation of Model NiAl Alloys Evidence for the Formation of Al-Rich Reservoir Phases Resulting from Interdiffusion between MCrAlY Coating and Ni-Based Substrate Effect of Pt Additions on the Sulfur Segregation, Void Formation and Oxide Scale Growth of Cast Nickel Aluminides Development and Oxidation of a RexOy- Modified Chromizing Coating Low Mass Bondcoat for Robust Thermal Barrier Coatings High Temperature Oxidation Behaviour of Aluminide Coatings Obtained by Pack Cementation Effects of Silica Nano-Particle Coatings on High-Temperature Oxidation of AISI 321 On the Understanding of TGO Growth and Spallation in Nickel Aluminides Effect of an Enamel Coating on Hot Corrosion Behavior of the Multi-Arc Plated NiCrAlY Composite Coating High Quality Aluminide and Thermal Barrier Coatings Deposition for New and Service Exposed Parts by CVD Techniques High Temperature Al/Si Diffusion Coatings Deposited by Chemical Vapor Deposition in Fluidized Bed Reactors (CVD-FBR) Coating Design Using Computational Codes for Steam Oxidation Conditions Effect of Electrodeposited Thin Films Containing Yttrium on High Temperature Oxidation Behaviour of Ni Base Alloys The Effect of Silicon on Cyclic Oxidation Behavior of Aluminide Coatings on Superalloy IN-738LC Microstructural Transformation in Platinum Aluminide Coated on CMSX-4 Superalloy High Temperature Oxidation of (Ti,Al)N and (Ti,Al,Y)N Coatings on a Steel Prepared by Arc Ion Plating (AIP) How to Design a Nano-Multilayered PVD Nitrides Based Coating Regarding its Resistance Against Oxidation and Aqueous Corrosion ? Failure Analysis of High-Temperature Oxidation for Plasma Sprayed Thermal Barrier Coating Systems with Different Coating Characteristics Zirconium Modified Aluminide by a Vapour Pack Cementation Process for Thermal Barrier Applications: Formation Mechanisms and Properties Measurement of Residual Stress in Thermally Grown Oxide Layers in Thermal Barrier Coating Systems - Development of Non-DestructiveTest Methods Corrosion Performance of Unbalanced Magnetron-Sputter Coatings in Atmospheres Containing 1%H2S or H2S + 1%HCl at 600 DegreesC Novel Low Temperature Diffusion Coatings for Heat Exchanger Materials On the Development and the Oxidation of Novel Ni-Cr and Ni-Al Nanocoatings by Composite Electrodeposition Evolution of Oxide Scale Morphology on (Ni,Pd)Al Coating during High Temperature Oxidation in Air Cyclic Oxidation of Chromia-Scale Forming Alloys: Lifetime Prediction and Accounting for the Effects of Major and Minor Alloying Additions Effect of Microstructure on the High Temperature Oxidation and Pesting Behaviour of MoSi2 Cyclic Oxidation Behaviour of Halogen Implanted Ti-46.5Al-4(Cr, Nb, Ta, B) High Temperature Properties of a New Powder Metallurgical FeCrAl Alloy The Oxidation Behaviour of the Commercial FeCrAlRE Alloys Aluchrom YHf and Kanthal AF Foils in Air at 800 Degrees-950 DegreesC Optimisation of In-Service Performance of Boiler Steels by Modelling High Temperature Corrosion - EU FP5 OPTICORR Project Numerical Model for Oxide Scale Growth with Explicit Treatment of Vacancy Fluxes Effect of Combined Yttrium and Zirconium Additions on Protective Alumina Scale Formation on High Purity FeCrAl Alloys during Oxidation in the Temperature Range of 1200 to 1300 DegreesC High Temperature Corrosion of TiAl - 2-5At-%X (X=Ag,Cr,Nb) Alloys in SO2 and H2S-H2 Atmospheres The Quantitative Role of Surface Doped Fluorine for the Improvement of Oxidation Resistance of TiAl in Air The Effect of Aluminium Ion Implantation on the Oxidation Behaviour of Fe-xCr-yAl Alloys In Situ - Investigation of the Oxide Scale Formation and Recrystallization of a FeCrAl Foil Importance of Beta Phase Formation for the Oxidation Resistance of TiAl Significantly Improved by Ion Implantation of Beta Formers Comparing Different Methods to Determine the Intergranular Oxidation Damage on a Nickel Based Superalloy Metal Dusting Performance of Nickel-Base Alloys The Use of Plasma Sprayed Laser Remelted Corrosion Resistant Metallic Coatings to Inhibit Metal Dusting The Role of Discontinuous Precipitation in Metal Dusting Experimental Analysis and Computer Simulation of Inward Oxide Growth during High-Temperature Corrosion of Low-Alloy Boiler Steels Influence of Aluminum Depletion Effects on the Calculation of the Oxidation Lifetimes of FeCrAl Alloys Low Temperature Oxidation of Pure Iron: Growth Kinetics and Scale Morphologies Predicting Equipment Lifetimes with High Temperature Corrosion Data An Interfacial Thermodynamic Model for the Oxidation Kinetics of a Metal: Epitaxial Stress Effects Luminescence-Based Characterization of Protective Oxides: from Failure Mechanisms to Non-Destructive Evaluation Measuring Adhesion of Cr2O3 and Al2O3 Scales on Fe-Based Alloys Direct Examinations of Oxide Scales upon Cooling: A New Way to Analyse Oxide Scale Spallation Influence of Environment on Creep Properties of MC2 Single Crystal Superalloy at 1150 DegreesC Piezo-Spectroscopy Studies of Stress and Damage Evolution in the Thermally Grown Oxide in TBCs Cyclic Oxidation Modeling and Life Prediction Growth Strains and Stress Relaxation in Alumina Scales during High Temperature Oxidation Study of the Thermal Oxidation of Fe-15 Cr by Combined Raman and Photoelectrochemical Imaging Multi-Sample Thermobalance for Rapid Cyclic Oxidation under Controlled Atmosphere A Thermo-Kinetic Study of Titanium Oxidation Assisted by a Nd-YAG Pulsed Laser Oxidation Kinetics and Scale Spallation of Iron-Chromium Alloys with Different Titanium Contents Deflection and Three Point Bending Tests in SEM: Mechanical Characteristics of Oxide Films Modelling the Deformation and Fracture of an Al2O3 Scale Developed on Fe3Al during Cooling The Role that Interacting Failure Mechanisms Have on the Lifetime of APS-TBC under Oxidizing Conditions Cyclic Oxidation Kinetics Modeling of NiAl Single Crystal Effect of Cycle Frequency on High Temperature Oxidation Behavior of Alumina-Forming Coatings Used for Industrial Gas Turbine Blades Oxide Growth Stresses in an Austenitic Stainless Steel Determined by Creep Extension Volatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered Questions Oxidation of Stainless Steel in H2O/O2 Environments - Role of Chromium Evaporation Interaction between Mechanical Loading in Creep and Reactivity of Zircaloy-4 at 450 DegreesC Effect of Alloying Additions in Ferritic 9-12%Cr Steels on the Temperature Dependence of the Steam Oxidation Resistance The Oxidation Behavior of Fe-Al Alloys Chemical Potential Distribution and Void Formation in Magnetite Scale Formed in Oxidation of Iron at 823K The Use of Model Alloys to Develop Corrosion-Resistant Stainless Steels The Effect of Water Vapour on the Oxidation of Stainless Steels Studied in Situ by X-Ray Diffraction Isothermal Oxidation Behaviour of a Hot-Work Tool Steel Oxygen and Water Vapour Oxidation of 15Cr Ferritic Stainless Steels with Different Silicon Contents High-Temperature Oxidation Behaviour of a Hot Isostatically-Pressed Si3N4-HfB2 Ceramic Composite Oxidation and Corrosion Properties of the MoAlxSi2-x (C40)/Al2O3 Composite Influence of Grain-Size on Ionic Conductivity of Pure and Dense -Al2O3 in the Temperature Range 400 - 1000 DegreesC An Evaluation of the Performance of Candidate Gas Turbine Abradeable Seal Materials Exposed to a High Temperature Combustion Atmosphere Role of Alkali Hydroxides in the Fireside Corrosion of Heat Transfer Surfaces, a Practical Approach Corrosion Experience in the Gasefier of the Elcogas IGCC Power Plant in Spain Nucleation and Growth of Oxide Constituents on NiCoCrAlY Bond Coats during the Different Stages of EB-PVD TBC Deposition and Upon Thermal Loading Development of a New Test Method of High Temperature Corrosion in Gas Turbines Based on Thermodynamic Modelling Development of Burner Rig Corrosion Tests for Gas Turbine Alloys: Study of Protective Metallic Coatings and Inhibitors for Hot Salt Corrosion Influence of Moisture on the Hot Corrosion of Metals in Nitrate and Sulfate Melts Corrosion of Metallic Materials in Combustion Gas Condensates at 250 DegreesC Development of Hot Corrosion on Coated Single Crystal Superalloys Innovative Coating for Aggressive Environments: Land-Based Gas Turbine Applications Steam Oxidation of Slurry Aluminide Coatings on Ferritic Steels for Advanced Coal-Fired Steam Power Plants A Pilot Plant Study of the Effect of Alkali Salts on Initial Stages of the High Temperature Corrosion of Alloy 304L High Temperature Corrosion of Superheater Tubes in Waste Incinerators and Coal-Fired Plants High Temperature Oxidation Behaviour of Boiler Steels under Simulated Combustion Gases Laboratory Testing for Evaluation of Steels and Alloys Used in Superheater Area of Boilers for Biomass-Based Fuels Modeling of Low-Temperature Oxidation of Steel Tubes in Biomass Combustion Field Investigation of Steamside Oxidation of TP347H Influence of KCl Deposit Morphology on Corrosion of Austenitic Alloys at 500 DegreesC Steam Oxidation Resistance of Selected Austenitic Steels Erosion-Corrosion of Alloys in Power Plant Heat Exchangers at Elevated Temperatures Steam Corrosion Resistance of New 12% Cr Ferritic Boiler Steels High Temperature Interaction of Pure Cr with KCl Fundamental Studies on Alkali Chloride Induced Corrosion during Combustion of Biomass Oxidation-Sulfidation Behavior of Multiphase Mo-Si-B Alloys Materials for Solid Oxide Fuel Cells: the Challenge of their Stability High Temperature Corrosion of Steels in Liquid Pb-Bi Alloy Interfacial Interactions between some La-Based Perovskite Thick Films and Ferritic Steel Substrate with Regard to the Operating Conditions of SOFC Phase Transformation and Growth of Alumina on a Thin FeCrAl-RE Foil at Around 900 DegreesC State of the Sub-Surface Microstructure of Carbides Strengthened Cast Superalloys after High Temperature Oxidation - Use of Thermodynamic Modelling for a Better Understanding Three Examples of High-Temperature Corrosion of Metals by Molten Glasses A New General and Rapid Method for Investigating Hot Corrosion: Preliminary Tests on Electrodes for Molten Carbonate Fuel Cells Approach of the Corrosion Behaviour of T91 Steel in Lead or Lead-Bismuth Liquid Bath High Temperature Performance of Ferritic Stainless Steels Manufactured by Powder-Metallurgy High Temperature Oxidation Behaviour of Base Material and Laser-Weld Specimens of a Thin FeCrAl-RE Foil at Around 900 DegreesC Corrosion of High Temperature Alloys in the Coolant Helium of a Gas Cooled Reactor Influence of the Microstructural Texture of Cast Superalloys on their High-Temperature Oxidation Behaviour Oxidation and Hot-Corrosion Behavior of Sputtered Ti-48Al-8Cr-2Ag Nanocrsytalline Coating

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA76166820
• ISBN:
  • 0878499458
• LCCN: 2004275604
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Uetikon-Zuerich, Switzerland
• ページ数/冊数: 2 v. (xliv, 1212 p.)
• 大きさ: 25 cm
• 分類:
  • LCC : TA417.7.H55
  • DC22 : 620.1/1217
• 件名:
  • LCSH : Materials at high temperatures -- Corrosion -- Congresses
  • LCSH : Materials at high temperatures -- Protection -- Congresses
• 親書誌ID:
  • BA00294222