Materials structure & micromechanics of fracture IV : MSMF-4 : proceedings of the fourth International Conference on Materials Structure & Micromechanics of Fracture, Brno, Czech Republic, June 23-25, 2004
Author(s)
Bibliographic Information
Materials structure & micromechanics of fracture IV : MSMF-4 : proceedings of the fourth International Conference on Materials Structure & Micromechanics of Fracture, Brno, Czech Republic, June 23-25, 2004
（Materials science forum, v. 482）
Trans Tech Publications, c2005
- Other Title
-
Materials structure and micromechanics of fracture
MSMF-4
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
"Under the auspices of Prof. Jan Vrbka, rector of the Brno University of Technology, Institutes of Physical and Materials Engineering, Faculty of Mechanical Engineering, Czech Society for New Materials and Technologies (CSNMT), approved by the European Structural Integrity Society (ESIS)."
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This volume contains papers selected from the more than 120 contributions presented during the 4th international conference on "Materials Structure & Micromechanics of Fracture (MSMF-4)", in Brno, Czech Republic, June 23-25, 2004.
Table of Contents
A Method for the Analysis of the Growth of Short Fatigue Cracks
Studies of SCC and Hydrogen Embrittlement of High Strength Alloys Using Fracture Mechanics Methods
A Model for Crack-Induced Nucleation of Dislocations, Complex Stacking Faults and Twins
Ideal Strength of Nano-Components
Theoretical Strength of Metals and Intermetallics from First Principles
Nanoscale Measurement of Stress and Strain by Quantitative High-Resolution Electron Microscopy
Atomic Force Microscopy Study of the Early Fatigue Damage
Mechanical Response of Semi-Brittle Nano Particles under an Imposed Cyclic Field
Prediction and Control of Grain Boundary Fracture in Brittle Materials on the Basis of the Strongest-Link Theory
Anisotropic Behaviour of Grain Boundaries
Plasticity of Copper with Small Grain Size
Mechanical Behavior of Nanostructured Aluminum Alloys Containing Quasicrystalline Phase
Effect of Processing Route on Microstructure and Mechanical Behaviour of Ultrafine Grained Metals Processed by Severe Plastic Deformation
Cause and Effect of Factors Affecting the Kth of Small Crack
The Significance of Plastic Zone Growth under Cyclic Loading and Crack Opening/Closing Model in Fatigue Crack Propagation
Microstructural Characterization by Nondestructive Methods
Critical Planes in Multiaxial Fatigue
Fracture Behaviour of Brittle (Glass) Matrix Composites
Breakdown of the Schmid Law in BCC Molybdenum Related to the Effect of Shear Stress Perpendicular to the Slip Direction
Criterion of Mechanical Instability in Inhomogeneous Atomic System
Ductile-Brittle Behavior of Microcracks in 3D
Elasticity and Stability of Fe-P Ordered Systems from First Principles
Ab-Initio Study of Mechanical Properties of Transition-Metal Aluminides: A Case Study for Al3(V,Ti)
Locally Initiated Elastic Waves in 2D Metals
Effect of Ordering on the Elastic Parameters of Multicomponent Ni-Based Systems
Near-Field Study of Carrier Dynamics in InAs/GaAs Quantum Dots Grown on InGaAs Layers
Disorientations and Their Role on the Work-Hardening in Stage IV
Stability and Motion of Low Angle Dislocation Boundaries in Precipitation Hardened Crystals
A Three Dimensional Discrete Dislocation Dynamics Analysis of Cyclic Straining in 316L Stainless Steel
The Migration of Solute Atoms in the Stress Field of a Slowly Moving Crack
Modelling Cleavage Fracture in High Strength Steels and Their Welds
Micromechanisms of Cleavage Fracture in HAZ of Low Carbon Steel Welds
Dislocation Structures of Duplex Stainless Steel in Uniaxial and Biaxial Cyclic Loading
Microstructure and Thermal Stability of Ultra Fine Grained Mg and Mg-Gd Alloys Prepared by High-Pressure Torsion
Annealing Behaviour of Fe-C-N Nanopowder: Formation of Iron/Graphite Core-Shell Structured Nanoparticles
Effect of Grain Boundary Segregation on Mechanical Properties of P-Doped Fe-Si Base Alloys
Influence of Lattice Anisotropy on Models Formulated by Cellular Automata in Presence of Grain Boundary Movement: A Case Study
Migration of the 45 Degrees[100],(001)/(011) Asymmetrical Tilt Grain Boundary in an Fe-6at%Si Alloy
Study of Carbon Films on Silicon Substrates
Positron Annihilation Studies of Microstructure of Ultra Fine Grained Metals Prepared by Severe Plastic Deformation
Experimental Investigation of the Local Deformation Behaviour of MMCs
Local and Global Fracture Properties in Metal Matrix Composites
Phase Composition and Microstructure Stability of Al-Ni-Zr Alloys
Interaction of a Crack in the Plasma-Sprayed Ceramic Coating with the Metal Substrate
3D Visualisation of Short Crack Propagation in Al Alloy Using High Resolution Synchrotron X-Ray Microtomography
Identification and Modelling of the Behaviour of a Duplex Stainless Steel by Methods of Scale Changing
Influence of Material State at a Crack Tip on the Process of Fatigue Striations Formation for Al-Based Alloys
Grain Size Estimation in Anisotropic Materials
Application of Silicon for a Protection of Titanium against High-Temperature Oxidation
Biocompatibility of Carbon Layer on Polymer
Biocompatibility of Polyethylene Doped with Oxycellulose
Strain Heterogeneity and Damage Localization in Nodular Cast Iron Microstructures
Textural Fractography of Fatigue Failures under Variable Cycle Loading
Analysis of Fracture Morphology and Local Loading Modes in Torsional Fatigue
Effect of Structure on Creep Behaviour of Superalloy Single Crystals
Microstructural Development in Tension and Compression Creep of Magnesium Alloy AE42
Microstructure and Creep Properties of AISI 316LN Steels with Niobium Additions
Effect of Processing Parameters on Microstructure and Properties of Continuously Cast Al-Mg Sheets
Effects of Hydrogen Environment on Fatigue Characteristics of 18Cr-8Ni Stainless Steel
Damage Mechanisms and Rupture Criterion of PM Ti-6Al-4V at 20K
Dip-Test Internal Stress and the Composite Model of Creep Deformation
The Formation and Destruction of the Boundary Layer in Polymer Composite Fiber Shells during Their Ageing
On Crack Path in Fibres-Reinforced Ceramic Composites
The Role of the Constraint in the Case of Short Cracks
Critical Strain Energy Density along the Curved Front of the Growing Fatigue Crack
On the Crack Tip Shielding in Particle Reinforced Composites
Identification and Simulation of Elastic-Plastic Deformation Model
New Description of Steady-State Creep Rate, Yield Stress, Stress Relaxation and Their Interrelation
Computational Modelling of Spherical Cavity Behaviour in Rubber-Like Solids
Tangent Moduli of the Hencky Material Model Derived from the Stored Energy Function at Finite Strains
Modelling of the Charpy Impact Test in the DBTT Range
Parameters Identification for GTN Model and Their Verification on 42CrMo4 Steel
A Fracture Mechanics Investigation on Crack Growth in Massive Forming
Finite Element Computational Technology in Resonant Ultrasound Spectroscopy of Composite Materials
Compatibilizer Effect of Grafted Glycidyl Methacrylate on EPDM/Organoclay Nanocomposites
Elastic Properties of Structural Phases in Shape Memory Alloys Investigated by Resonant Ultrasound Spectroscopy
Effect of Interfaces on Fiber Fracture in Mg and MgLi Matrix Composites
Influence of Inclusions on Fatigue Characteristics of Non-Combustible Mg Alloy
Mechanical Properties of AS21 Magnesium Alloy Based Composites
Investigation of Dynamic Strain Ageing Effects of Low Alloy Steels 15Kh2MFA and 15Kh2NMFA
Influence of Isothermal Transformation Dwell on Tensile and Fatigue Properties of Austempered Ductile Iron
Influence of Temperature on Fracture Mechanisms of Magnesium Composites
Influence of Surface Skin on the Fatigue Properties of Die-Cast Magnesium Alloy AS21X
Crack Growth Anomalies in Base Steel P91 and in HAZ
Damping Measurements of the Magnesium Wrought Alloys AZ31, AZ61 and AZ80 after Indirect and Hydrostatic Extrusion
Electrical Properties of Polymer Composites
Application of Giant Magnetostrictive Material into Construction of Broad Spectrum Vibration Generator
On a Testing of Mechanical Properties of Material Surfaces
Experimental Identification of Magnetorheological Composites and Elastomers Properties
Relation between Uniaxial and Equi-Biaxial Creep and Creep Fracture Behaviour in P91 Steel
by "Nielsen BookData"
