Eco-materials processing & design VI : proceedings of the 6th International Symposium on Eco-Materials Processing & Design, January 16-18, 2005, Jinju, Korea

著者

書誌事項

Eco-materials processing & design VI : proceedings of the 6th International Symposium on Eco-Materials Processing & Design, January 16-18, 2005, Jinju, Korea

edited by Hyung Sun Kim ... [et al.]

（Materials science forum, v. 486-487）

Trans Tech Publications, c2005

タイトル別名

ISEPD-6

Ecomaterials processing and design

大学図書館所蔵 件 / 全1件

この図書・雑誌をさがす

注記

"ISEPD-6"--Opposite of t.p. verso

Includes bibliographical references and indexes

Full text available online at http://www.scientific.net

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The book will present materials researchers and users with a wealth of new information covering the entire spectrum of ecology, eco-materials, nano-materials, bio-materials, recycling, environmental protection and energy conversion related materials.

目次

Electrochemical Characteristics of Silicon-Doped Tin Oxide Thin Films for Application of Lithium Secondary Micro-Battery Anode Sol-Gel Derived TiO2 Coating for Chemical Protection of Stainless Steel Gas Sensing Characteristics of ZnO-doped SnO2 Sensors for Simulants of the Chemical Agents Effect of Hydrogen Peroxide on the Photocatalytic Decomposition of 4-Nitrophenol over TiO2/Cr-Ti- MCM-41 Catalysts in Visible Light A Rainwater Harvesting Technology by Roof Coating Using TiO2 Structure and Photoluminescence Properties of ZnO:Al/Porous Silicon Thin Films Morphology and Microstructure of Graphitic Nanofibers Synthesized by the CVD Method Using Nickel-Copper as a Catalyst Sensitivity and Thermal Property of Polyaniline Sensor Characteristic of Titania Photocatalyst Fine Particles Added Zirconia The Preparation of Rutile TiO2 Nanopowders, Phase Transformation and Their Photocatalysed Properties Decomposition of Dioxins in Gas and Water Using Photocatalytic Silica-Gel Bond Cleavage of Nitrogen-Bearing Organics with "Molecular Scissors" of Titania for Aquatic Remediation Photocatalytic Activities of Plasma Sprayed TiO2-Based Coatings The Preparation of Rutile TiO2 Doped with Rare Earth Metal Ions, Sulfur and Their Photocatalytic Properties Photocatalytic Behavior of Na2ZrTi5O13 Sol-Gel Semiconductor-Mediated Photocatalysed Degradation of Various Pesticide Derivatives and Other Priority Organic Pollutants in Aqueous Suspensions Correlation of Thickness with the Photocatalytic Characteristic of TiO2 Thin Films Photocatalytic Performance of Plasma Sprayed TiO2-ZnFe2O4 Coatings Effect of H2 on Microstructure and Property of Nano-Titania Coatings Preparation and Antibacterial Effect of Doped Tetra-Needle Like ZnO Whiskers Preparation and Characterization of the Visible Light Responsive TiO2 Thin Film Photocatalysts Prepared by Magnetron Sputtering Method and Their Photocatalytic Activities for the Water Splitting Reactions Sol-Gel Synthesis and Photocatalitic Properties of Bi2MNbO7 (M = Al, Fe, In y Sm) Influence of Spraying Power and Distance on Porosity and Microhardness of Plasma Sprayed TiO2 Coatings Preparation of Nano-Sized TiO2 Photocatalysts by a Multi-Gelation Method and Their Application to the Degradation of 2-Propanol Diluted in Water High Temperature Oxidation Behavior of Ti3SiC2 in Air Fabrication of Zirconia-Hydroxyapatite Composites for Biological Materials Thermal and Leaching Behaviors of EAF Dust-Clay Systems Increased High Temperature Oxidation Resistance of Ni20Cr20Fe5Nb1Y2O3 Alloy with Nano-Sized Grains Changes in Mechanical Properties of the Wide-Gap Region Brazed with Various Brazing Temperatures and Times Preparation of Porous Hydroxyapatite/TCP Composite Block Using a Hydrothermal Hot Pressing Method Life Cycle Improvement Assessment of Al and Mg Diecasting Processes Effects of the Duration of Potentiostatic Anodizing on the Corrosion Resistance and Surface Morphology of Films Formed on Mg-Al Alloys Surface Morphology Characteristics and Improvements on Corrosion Resistance in Anodized Mg-Al Alloys as a Result of Sealing Treatments Effects of Post-Weld Heat Treatment on Optimum Cathodic Protection Potential of High-Strength Steel in Marine Environment Conditions Sliding Wear Behavior of Steam Generator Tube Materials in Nuclear Power Plants Characterization of Long-Term Oxidized Nickel Aluminide Coating by Photoluminescence Spectroscopy Characterization of Isothermally Oxidized ZrO2-8wt.%Y2O3 Thermal Barrier Coatings by Electrochemical Impedance Spectroscopy Transmission Electron Microscopy of Isothermally Oxidized EB-PVD Thermal Barrier Coating on (Ni,Pt)Al Bondcoat Surface Characteristics of Ni-Diamond Composite Powders by Electroless Plating Method Self-Lubricating Composite Coating on Air Foil Bearing Shaft by Hollow Cathode Plasma Jet Surface Coating of Reactive Layer with Inner Nano-Pores on Lantanium Gallium Based Oxide Oxidation of SiOC Composite Having Dispersoids of Mo4.8Si3C0.6 and MoSi2 Corrosion of Ni-W Coatings in SO2 Atmosphere between 500 and 700 DegreesC Fluxless Brazing of Al6061 Alloys Using Ag-28Cu Insert Phosphate Recovery from Water as Hydroxyapatite with Activated Oystershell Mechanical and Thermal Properties of Silicon Nitride Hot Pressed with Adding Rare-Earth Oxides Stress Concentration Regions in Ceramic Ball Heads for Total Hip Replacement Considering Trauma-Like Loading Biodegradable Porous Nano-Hydroxyapatite/Alginate Scaffold Effect of Plasma Spraying Gas on Microstructure and Properties of 95vol.%Al2O3-5vol.%SiC Nanocomposite Coatings Mechanical Properties of Al2O3-TiO2-SiC Nanocomposites for the Femoral Head of Hip Joint Replacement Plasma-Sprayed Wollastonite Coatings for Biomedical Application Study of Corrosion Resistance of Anodized Ti6Al4V in SBF Mechanical and Wear Properties of Silicon Nitride Added with AlN Tribological Behaviors of Al2O3/SiC Nanocomposites during Dry Sliding Contact Fracture Behaviors of Ti3SiC2 Synthesized by Hot Pressing Using TiCx and Si Powder Mixture Sintering Effects of ZnO Nanopowders Synthesized by Solution-Combustion Method In-Vitro Hertzian Fatigue Properties of Glass Infiltrated Ceramic Composites for Dental Crowns Probabilistic Assessment for Failure Probability of Pipe Lines by Extreme Value Distribution Analysis of Pipe Flow during Transportation of Magnesium Alloy Melt Effect of Sintering Atmospheres on the Microstructure Evolution of Alumina/Alumina:SiC Whisker Laminate Composites Embrittlement Fracture in a 17-4 PH Stainless Steel after Aging at 400 DegreesC Hardness and Wear Resistance of Reaction Bonded SiC-B4C Composite Friction Stir Welding of Dissimilar Formed Mg Alloys (AZ31/AZ91) Fabrication and Thermoelectric Properties of N-Type Bi2Te3 Based Compounds by Spark Plasma Sintering Equilibrium and Metastable Eutectics Near the Ni3Al Composition Effect of Skin Pass Mill Elongation on Characteristics of Surface Friction and Formability The Combustion Characteristics of Refuse Derived Fuels Using Coke/Waste Tire Optimum Shear Height for Evaluation of Pb-Free Solder Ball Shear Strength Growth Kinetics of Intermetallic Compound and Interfacial Reactions in Pb-Free Flip Chip Solder Bump during Solid State Isothermal Aging An Approach to Legal and Technical Norms to Manage Hazardous Materials and Wastes in Latin America Low Temperature Synthesis of Zeolite Using Ultrasonic Energy Ferroelectric Properties of Lead-Free (Bi,La)4Ti3O12 Thin Film Deposited on MTP Cell Structure for High Density FeRAM Device Interfacial Reaction and Shear Strength of Pb-Free Sn-3.5Ag/Ni BGA Solder Joints during Reflow Fabrication of Calcium Based Fine Ceramic Materials by Recycling Eggshell Nitride-Related Compounds Preparation from Waste Aluminum Dross by Self-Propagating High-Temperature Process Dual Ion Beam Sputtering for Chromium Nitride as an Alternative to Electroplated Hexavalent Chromium The Effect of Pozzolanics on the Recycled Aggregates by Surface Treatment Effect of RO Components on Some Properties of Pb Free Glass Frit for PDP Application of a Cold ECAP to Magnesium Alloy (AZ31) by a Combination of Extrusion Process Effect of Particle Size on the Extraction of Metallic Components from Oxidized PCB in High Frequency Induction Furnace Optical Properties of Bi2O3-ZnO-SiO2 Glass System for Eco Transparent Dielectric in PDP Comparison of Transmittance of Pb-Free Transparent Dielectric Made by Screen Printer and Die Coater Alumina/Aluminum Composite Fabricated by Freeze and Dry Process with Water-Soluble Polymer Slurry Fabrication of Tubular Mullite-Alumina Porous Ceramics by Polymer-Aided Extrusion Microstructural Evolution of Electromagnetically Stirred Al Alloy during Isothermal Reheating in Solid-Liquid Region Effect of Ternary Alloying Elements on Microstructure and Mechanical Property of Nb-Si Based Refractory Intermetallic Alloy Influences of Fiber Orientation on the Progressive Damage in Glass Reinforced Hybrid Composite Characteristic of the Residual Strength Rate by Variation of Impact Velocities for the Leaf Spring in Ankle Foot Orthosis The Effect of Defect Locations on the Stress Distribution and Crack Initiation in Monolithic Aluminum vs. GLARE Hybrid Composite Vibration and Impact Noise Damping Properties of Wood/Polymer Composites Processing and Microstructural Characteristics of Bi-Materials Composed of Al and Its Composite Mechanical and Electrical Properties of Y-TZP Containing TiNi-Base Intermetallic Compounds Electrical and Thermal Properties of Carbon-Coated Porous Ceramic Fiber Composites The Solidification Microstructure and Carbide Formation Behaviors in the Cobalt-Based Superalloy ECY768 Synthesis of SiC Ceramics from Coal Gangue Heavy Metal Leaching Behavior of Glasses Containing EAF Dust Nutrients Recovery by Struvite Formation from Wastewater in a Fluidized Bed Reactor The Effect of Sodium Tripolyphosphate on Sodium Silicate-Cement Grout Fabrication and Properties of Wall and Floor Tiles Using Waste Glass Utilization of Waste Plastics as a Fuel in the Fluidized Bed Calciner for Cement Kiln Process Synthesis and Characterization of Clay Brick Using Coal Wastes Preparation of K2O-CaO-P2O5 Eco-Glass Fertilizers and Effect in Crops Effect of Warm Rolling on Microstructure and High Temperature Mechanical Behavior of a Nano-Structured Al-8Fe-2Mo-2V-1Zr Alloy Effects of Si Content and Cold Rolling Condition on Brazeability of Al-Mn-Zn Alloy Core Brazing Sheet Effect of Ti Addition on the Fracture Toughness of Al-Ti-B Alloys Synthesized by High-Energy Ball Milling and Spark Plasma Sintering Die-Casting Capabilities of Heat Resistant Mg-Al-Ca Alloys Formation of AlN in the N Added 18Cr Ferritic Stainless Steels Petroleum Separation through Polymer Blend Membranes Using Pervaporation Synthesis and Characterization of Nanosized ZnxMn1-xFe2O4 Powders by Glycothermal Process Synthesis and Characterization of Nanosized ITO Powders by Glycothermal Processing Preliminary Studies to Develop Environmentally Compatible Hydraulic Components Cellular Solidification Behavior of Fe-18Cr Ferritic Stainless Steels Substrate Bias Effects on the Structure of the Film by a Hybrid PVD and Plasma-Based Ion Implantation Process Development of Strip Casting Process for Electrolytic Tough Pitch Copper Effect of Boron on Solidification Microstructure in a Single Crystal Superalloy Rheology Characteristics of Al-Si Alloy and Mg Alloy for Metal Foam Manufacturing Sound Absorption Properties of Al Foam Compressive Properties of Open Cell Aluminum Foams Synthesis of Cordierite Using High Energy Ball Milling Brazing Al2O3 to Kovar Alloy with Ni/Ti/Ni Interlayer and Dramatic Increasing of Joint Strength after Thermal Cycles Effect of Operating Temperature on Characteristics of Single-Walled Carbon Nanotubes Gas Sensor Micromechanical Mean-Field Analysis for Stress-Strain Curve of Lotus-Type Porous Iron Preparation and Properties of Carbon Nanofiber/Polyimide Composite Films Thermal Stability and Mechanical Properties of Hydrogenated Zr-Ni-Nb-Co Amorphous Alloy Fabrication of Silicon Nitride Ceramics with Electrical Conductivity Microwave Dielectric Properties of LTCC Materials Consisting of BaO-TiO2-SiO2-Al2O3 Glass - BaNd2Ti5O14 Ceramic Composites Removal of Cu++ Ions from Aqueous Cu-EDTA Solution Using ZnO Nanopowder Reactive Sputter Deposition of WCx Films for Replacing Hexavalent Chromium Characterization of Iron and Its Nitride Nanoparticles Prepared by CVC Process without Using a Chiller Synthesis of Heterogeneous -SiC Nano-Particles and Nano-Whisker from TEOS/SiO2 Bead/PMMA Ternary Xerogel Effect of Oxidizing Agent of Polypyrrole Layer Prepared by Vapor Polymerization Various Applications of Silver Nano-Particles by Ultrasonic Eco-Fabrication Influence of Heat-Treatment on the Mechanical Properties of Lotus-Type Porous Carbon Steel Fabricated by Continuous Zone Melting Method Effect of Oxide Additives on the Aspect Ratio Control of Mullite Whiskers Synthesis of Calcium Carbonate from Calcium Chlorine Solution Using Homogeneous Precipitation Method Synthesis of Calcium Carbonate Particles Modified by Coating with Nickel Precursor Influence of the Electromagnetic Stirring on Globularization of Primary Solid Phase in Solid-Liquid Region Thermoelectric Properties of Co1-xNbxSb3 Prepared by Induction Melting Electrochemical Characteristics of Si/Mo Multilayer Anode for Microbattery in MEMS Characteristics of SnOx-Coated Lithium Manganese Oxide Thin Film for MEMS Power System Characteristics of Polymer Composite Electrolyte for MEMS Power System Effect of PVP Addition on Microstructure of SrZrO3 Thin Films on Bi(2223) Tapes Effect of Solvent Extraction on Removal of Heavy Metal Ions Using Lignocellulosic Fiber Sound Absorbing Properties of Foamed Glasses Hydriding/Dehydriding Behavior of Mg-Ni Systems Hydrogenation Properties of Mg-TiNi Hydrogen Storage Composites Materials Electrical and Electrochemical Properties of Poly(P-Phenylene)-Based Carbon for Lithium Rechargeable Batteries Electrochemical Characteristics of Li/S Secondary Battery with (PEO)6LiBF4-Al2O3 Composite Polymer Electrolyte Prepared by Ball Milling Effects of MWNT and GNF on the Performance of Sulfur Electrode for Li/S Battery Thermoelectric Properties of Co1-xNbxSb3 Prepared by Induction Melting Charge/Discharge Characteristics of SnO2 Electrodes for Lithium Polymer Batteries Effect of Organic Additives in Electrolytes for Rechargeable Lithium/Sulfur Battery Synthesis and Electrochemical Study of Zr-Doped LiNixMnyCo(1-x-y)O2 as Cathode Material for Secondary Li-Ion Battery Transformation Behavior and Mechanical Properties of an Equiatomic Ti-Ni Alloy with Surface Sulfide Layers Thermal Sulfidation Behavior of Ti-Ni Alloys Microstructure and Electrical Properties of R.F. Magnetron Sputtering Derived PZT Thin Films Deposited on PbO Buffer Layer Self-Discharge Behavior of Lithium/Sulfur Battery Using Aluminum Current Collector Discharge-Charge Property of Lithium/PEO/Sulfur Battery with High Sulfur Content Ionic Conductivity of Sodium Ion with NaCF3SO3 Salts in Electrolyte for Sodium Batteries Mechanical Alloying and Thermoelectric Properties of CoSb3 Skutterudite Orientation Distribution in Bi2Te3-Based Compound Prepared by Spark Plasma Sintering Application of a Ti-Ni Alloy as a Current Collector of Positive Electrode for Lithium/Sulfur Batteries Synthesis and Thermoelectric Properties of N-Type Bi2Te2.7Se0.3 Compounds by Spark Plasma Sintering Electrochemical Properties of Primary Li/FeS2 Batteries Synthesis of Ni-YSZ Cermet for an Electrode of High Temperature Electrolysis by High Energy Ball Milling Emissive Carbon Coating for Energy Saving

「Nielsen BookData」 より

関連文献： 1件中  1-1を表示

詳細情報

ページトップへ