Residual stresses VII : ICRS 7 : proceedings of the 7th International Conference on Residual Stresses, ICRS-7 Xi'an, China, 14-17, June, 2004

著者

• International Conference on Residual Stresses
• Denis, S.

書誌事項

Residual stresses VII : ICRS 7 : proceedings of the 7th International Conference on Residual Stresses, ICRS-7 Xi'an, China, 14-17, June, 2004

edited by Sabine Denis ... [et al.]

（Materials science forum, v. 490-491）

Trans Tech Publications, c2005

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

The field of Residual Stresses is surprisingly large, and also highly interdisciplinary in nature, both with regard to its applications and to its scientific and technological fundamentals. Volume is indexed by Thomson Reuters CPCI-S (WoS).

目次

Two-Dimensional X-Ray Diffraction for Structure and Stress Analysis Diffraction Stress Analysis Using Direction Dependent Grain-Interaction Models Mechanics of End Effects in Thin Film and Substrate Stress Distributions Application of X-Ray and Neutron Diffraction Methods to Reliability Evaluation of Structural Components and Electronic Device Multiscale Study of Internal Stress and Texture in Ferroelectrics FaME38 - Improving the Effectiveness of Strain Measurements Evaluation of Local Stress Distribution Near Notch and Crack Tips in Al2O3 by Synchrotron Radiation Residual Stresses around an Expanded Hole in an Aluminum Clad Sheet Influence of Transformation Plasticity on Residual Stresses and Distortions due to the Heat Treatment of Steels with Different Carbon Content Residual Stress Prediction in Dissimilar Metal Weld Pipe Joints Using the Finite Element Method An Advanced Residual Stress Determination for 3D Cylinder Structure Modelling of the Ultrasonic Shot Peening Process Effect of Graphite Inclusions on Mechanical Properties of Austempered Ductile Iron 3-D Finite Element Simulation of Welding Residual Stresses in Pipe-Flange Joints: Effect of Welding Parameters Numerical Simulation of Thermal Stress in Castings Using FDM/FEM Integrated Method Determination of Residual Stress Distribution in Autofrettaged Tube Based on Modified Yielding Criterion and Tensile-Compressive Curve of Material Thermal Stress Relief in 7050 Aluminum Forgings by Uphill Quenching Reduce the Residual Stress of Welded Structures by Post-Weld Vibration Effect of Stress Wave in the Course of Metal Machining Simulation of the Residual Stress of Cold-Formed Thin-Wall Steel Members and Calculation of Load under Its Influence Measurement of Stress Distribution Near Fatigue Crack in Ultra-Fine Grained Steel by Synchrotron Radiation Approximate Analytical Formulae to Evaluate the Uncertainty in X-Ray Stress Analysis Adaptation of the X-Ray Diffraction Technique to the Analysis of Residual Stress in Carbo-Nitrided Steel Layers The Sensitivity of Focusing, Parallel Beam and Mixed Optics to Alignment Errors in XRD Residual Stress Measurements X-Ray Stress Measurement Using Whole Back Diffraction Ring Non-Destructive Analysis of Surface Stresses Using Grazing Incident X-Ray Diffraction Stresses Evaluation by Transmission Energy Dispersive X-Ray Diffraction Using Industrial Radiography Equipment Surface Roughness Effect on Pseudo-GIXRD Stress Analysis Inter and Intra Granular Strain Analysis by Microdiffraction Kossel Residual Stress Mapping in Railway Rails Residual Stress Error Introduced by Truncated Patterns: Prediction and Correction A New Type of Instrument with Its Special Excited Input-Signal in Inspecting Residual Stress Effects of Temperature Fluctuations on X-Ray Stress Determination Ultrasonic Evaluation of Compressive Residual Stress of Surface Treated Metals Determination of Volume Fraction of Constituents in Deformed Stainless Steel by Means of Image Plate Residual Stresses Measurement Using an Indentation Made by an Impact Load Measurement on X-Ray Stress Constant of Beryllium Principle and Method of X-Ray Computer Tomography on Residual Stress Measurement A New Method for Measuring Residual Stress Relaxation during Nanoindentation Residual Stress Measurements in Australia: Present and Future Comparative Neutron and Synchrotron X-Ray Diffraction Studies to Determine Residual Stress on an As-Welded AA2024 Plate Neutron Stress Measurement Using Neutron Image Plate Suppression of Surface Effect by Using Bent-Perfect-Crystal Monochromator in Residual Strain Scanning Internal Stress Measurement of Fiber Reinforced Composite by Neutron Diffraction with In Situ Low Temperature Stress Measurement System Development of New Stress Measurement Method Using Neutron Diffraction Neutron Determination of Residual Stress in a Nitrided Notched Part Neutron Diffraction Study of Extruded Magnesium during Cyclic and Elevated Temperature Loading Neutron Diffraction Analysis of Residual Stresses Induced by Laser Shock Peening Neutron Evaluation of Stress in Industrial Screws In Situ Neutron Diffraction Studies of Phase Transformations in Si - Mn TRIP Steel X-Ray Stress Measurement of Carbide in Tool Steel In Situ Synchrotron Measurements of Oxide Growth Strains Residual Stress Mapping in Welds Using the Contour Method The Vibratory Stress Relief of Drill Pipe Effect of Machining Conditions on Residual Stress Corrosion Cracking of 316L SS Measurement and Analysis of Surface Residual Stress of Railroad Wheels with X-Ray Method Effects of Stress Cycles on Surface Magnetic Field Measurement and Analysis of Residue Stresses Conditions in High Pressure Gas Cylinder Alternative Mechanical Surface Treatments for Fatigue Strength Enhancement Residual Stresses Induced by Laser FreeForm Fabrication The Effect of Fatigue on Residual Peening Stresses in Aerospace Components Influence of Grinding Conditions on Residual Stress Profiles after Induction Surface Hardening Residual Stresses Induced by Robotized Hammer-Peening Residual Stresses due to Deep-Drawing of Pre-Coated Aluminum-Alloy Sheets Residual Stress in a Quenched Gear Shaft Treated by Water Cavitation Peening Compressive Residual Stress Evolution Process by Laser Peening Residual Stress State and Cyclic Deformation Behaviour of Deep Rolled and Laser-Shock Peened AISI 304 Stainless Steel at Elevated Temperatures Approach of Residual Stress Generated by Deep Rolling Application to the Reinforcement of the Fatigue Resistance of Crankshafts An Investigation into Work Hardening of Shot Peening Affected Layer Using X-Ray Stress Analysis Technique Calculation of Relaxation of Residual Stress and Change of Yield Strength in Shot Peened Layer Residual Stress Relaxation during Fatigue of Clinched Joints in Stainless Steels A Strategy for Life Prediction of Fatigue Loaded Welded Constructions by Use of Continuously Measured Micromagnetic Parameters Effect of Very High Stress Levels on the Fatigue Life of a TiAl Based Alloy Depth Resolved Investigation of Friction Stir Welds Made from AA2024 / AA2024 and AA2024 / AA6082 Using a Spiral Slit and High Energy Synchrotron Radiation A Study on Residual Stress Relaxation under Quasi-Static Load Residual Stress Relaxation and Cyclic Deformation Behavior of Deep Rolled AlMg4.5Mn (AA5083) at Elevated Temperatures Stability and Relaxation of Homogeneous Microstresses in Two-Phase Steels with Cyclic Loading Influence of Shot Peening on Fatigue Properties in Ultra-High Strength Steels Effect of Applied and Residual Stresses on the Analysis of Mechanical Properties by Means of Instrumented Indentation Techniques Residual Stress Profiles of the Laser Surface Remelted Nodular Irons Non-Homogenous Precipitation Annealing of Maraging Steels Relieving Welding Residual Stress by Applying Vibratory Weld Conditioning Analysis of Residual Stress Influencing on Safety of Steam Turbine Determination of Residual Stress Gradients in Al2O3 Ceramics after Thermal and Mechanical Loading Analysis of Residual Stresses and Distortions in Brazed Joints of Cemented Carbide and Steel Dendritic Stresses in Nickel-Base Superalloys Analysis of Residual Stresses in Micro Powder Injection Moulded Micro Bending Specimens Made of Zirconia Modification of Alumina Ceramics Properties by Stressonic (R) Shot Peening Residual Stresses in Bulk Metallic Glasses due to Thermal Tempering Residual Stresses and Strength of Shot Peened Silicon Nitride Ceramics Synchrotron Evaluation of Residual Stress in a Leucite Reinforced Glass Ceramic Determination of the Residual Stresses in Composite Laminate Using the Compliance Method The Connection between Micro-Residual Stress and Thermo-Mechanical Treatments in 6061Al-15vol%SiCw Composites Depth Profile of Titanium Alloy (Ti-6Al-4V) and Residual Stress Measured by Using X-Ray Diffraction after Metal Cutting Assisted by High-Pressured Jet Cooling Evaluation of Etching Methods: ION Beam (EDOS) and Electro-Chemical Etching An Investigation of Residual Stress of Porous Titania Layer by Micro-Arc Oxidation under Different Voltages Effect of Thermal Mismatch Stress on Thermal Expansion Behaviors of Al18B4O33w/Al Composite Containing Fe3O4 Particle Internal Stress Effects on Mechanical Properties of TiCp Particle Reinforced Titanium Composites Measurements of the Residual Stresses due to Cement Polymerization for Cemented Hip Implants In Situ Observation of Thermal Stress in Nano-Size Thin Aluminum Films Residual Stress Effects on Raman Spectra of RuO2 Thin Films Microstresses in Molybdenum Nitride Thin Films Deposited by Reactive DC Magnetron Sputtering Investigation of the Relationship between Annealing Temperature and Yield Strength in Cu Film by In Situ XRD Stress Analysis Method Influence of Interfacial Neighborhood on Residual Stress due to Deposition of TiN Thin Films Made by PVD Residual Stress Analysis of Thermal Sprayed Molybdenum Deposit Effect of Substrate Temperature on Crystal Orientation and Residual Stress in RF Sputtered Gallium Nitride Films Residual Stress and Wear Characteristics of Ni3Al Coating Layer Generation of Nanostructures on 316L Stainless Steel and Its Effect on Mechanical Behavior Spalling Stress in Oxidized Thermal Barrier Coatings Evaluated by X-Ray Diffraction Method Evaluation of Residual Stress in Nano-TiO2 Film on ITO Glass by Synchrotron X-Ray Diffraction Residual Stress Analysis in Both As-Deposited and Annealed CrN Coatings Sensitivity of a Rotating Beam Sensor for Stress Evaluation in Aluminium Thin Films Delamination and Buckling Induced by Compressive Strain in Metal Thin Films Residual Stress Measurement in Sputtered Copper Thin Films by Synchrotron Radiation and Ordinary X-Rays Testing and Analysis of the Inner Stress in Adhesive Coating Layer Using Strain Gauges and Finite Element Method Application of the White/Monochromatic X-Ray -Diffraction Technique to the Study of Texture and Triaxial Strain at the Submicron Level X-Ray Measurements of Residual Stress Distribution in TiN Thin Films with Fiber Texture XRD Stress Analysis in a TiAl Based Intermetallic Multicrystal Determination of Residual Stresses after Tensile Tests and Deep Drawing of Unstable Austenitic Steel A Study on the Microstrains in the Textured YBa2Cu3O7-d Superconductor Films

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA76176609
• ISBN:
  • 0878499695
• LCCN: 2005276809
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Uetikon-Zuerich, Switzerland
• ページ数/冊数: xvi, 708 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA00294222