Textures of materials : ICOTOM 14 : Proceedings of the 14th International Conference on Textures of Materials, held in Leuven, Belgium, July 11-15, 2005

著者

• International Conference on Textures of Materials
• Houtte, Paul van
• Kestens, Leo

書誌事項

Textures of materials : ICOTOM 14 : Proceedings of the 14th International Conference on Textures of Materials, held in Leuven, Belgium, July 11-15, 2005

edited by Paul Van Houtte, Leo Kestens

（Materials science forum, v. 495-497）

Trans Tech Publications, c2005

• set
• pt. 1
• pt. 2

タイトル別名

Proceedings of the 14th International Conference on Textures of Materials

ICOTOM-14

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

To the materials science community, Texture is an important property which describes the relative orientations of the various material elements which constitute the microstructure. These elements are usually the crystalline grains; each with a different orientation of its crystal lattice. However, morphological textures, such as the arrangement of fibers in a composite material, also have to be considered. In rare cases, the texture is random; with all possible orientations being equally represented in the material. But, usually, processing of the material has caused the texture to become non-random; with a consequent anisotropy of the material properties. Thus, not only metallurgists and materials scientists take an interest in textures, but also physicists, mathematicians, geologists, mechanical engineers and others.

目次

• Application of Orientation Microscopy in SEM and TEM for the Study of Texture Formation during Recrystallisation Processes Texture and Symmetry Relationships in Piezoelectric Materials Microstructure Sensitive Design with First Order Homogenization Theories and Finite Element Codes The Application of Multiscale Modelling for the Prediction of Plastic Anisotropy and Deformation Textures Complexity of the Anisotropy of Magnetic Susceptibility in Single-Phase Deformed, Low-Grade, Cleaved Mudstone Crystallographic Control on the Development of Texture in Precipitated Quartz Grains Textures in Experimentally Deformed Olivine Aggregates: The Effects of Added Water and Melt Joint Inclination Effect on Strength, Stress-Strain Curve and Strain Localization of Rock in Plane Strain Compression Development of Nonuniform Substructure and Microstrain Distribution by Texture Formation in Metal Materials Exploration of the Six-Dimensional Orientation-Location Space with Hard X-Rays Accounting for Secondary Extinction in Thickness Measurement of Thin Films by X-Ray Absorption A PF Measurement Attachment of the Work-Piece for ODF Analysis Quantitative Texture Measurements Using Neutron Time-Of-Flight Diffraction Quantitative Texture Analysis with the HIPPO TOF Diffractometer Effect of Strong Neutron Absorption on Texture and Diffraction Data Analysis In Situ High Temperature Texture Characterisation in NiTi Shape Memory Alloy Using Synchrotron Radiation Texture Determination of Thin Cu-Wires by Synchrotron Radiation Measurement of High-Resolution Recrystallization Textures in Nickel Sheets Using High-Energy Synchrotron Radiation Determination of Multipeak Textures with High-Energy Synchrotron Radiation Quantification of Texture Inhomogeneity The Use of Rodrigues-Frank Space for Representing Discrete Misorientation Distributions Effect of Local Texture on the Orange Peel Defect in St14 Steel Sheet An EBSD Analysis of the Origins of Ridging in AISI 430 Steel Sheets Statistical Errors of Texture Entities Based on EBSD Orientation Measurements 3-Dimensional Fabric Reconstruction from 2-Dimensional Orientation Images Automated Twin Identification Technique for Use with Electron Backscatter Diffraction Orientation Maps Derived from TEM Diffraction Patterns Collected with an External CCD Camera The Effect of Grain Orientation on Micro Frictional of Medium Carbon Steel Scalar Measures of Texture Heterogeneity Optical Grain Size Measurements: What is Being Measured? Comparative Study of Optical and EBSD Grain Sizes Determination in 2D Al Foil Unbiased Evaluation of Chord Length Distributions from Orientation Maps Extension of Orientation Mapping to the Transmission Electron Microscope Effect of Orientation Noise on the Determination of Percolation Thresholds from Electron Back-Scatter Pattern Data Three-Dimensional Texture Analysis High Resolution Texture Analysis with Spherical Wavelets Combined Synchrotron and Neutron Strcutural Refinement of R-Phase in Ti50.75.Ni47.75.Fe1.50 Shape Memory Alloy On Probability - Statistical Representation of Pole Figures for Materials with Hexagonal Symmetry Determination of an ODF from Diffraction Measurements Based on Optimal Smoothing Splines The Influence of Errors of X-Ray Texture Measurements on ODF Calculation with Central Normal Distribution Approximation Common Basics of Mathematical Texture Analysis Geometry of the ODF-to-PDF Projection in Quaternion Representation Visualization of Patterns of Preferred Crystallographic Orientation by -Sections Ideal Patterns of Crystallographic Preferred Orientation and Their Representation by the von Mises - Fisher Matrix or Bingham Quaternion Distribution ODF Restoration by Orientations Grid Investigation of Measured Pole Figures Errors PDF-to-ODF Inversion by Approximation with Spherical Radial Basis Functions Design of Crystallographic and Morphologic Texture for Elastic/Plastic Applications A Novel Optimization-Based Pole Figure Inversion Method The ODF-Spectrum a New and Comprehensive Characterization of the Degree of Anisotropy of Orientation Distributions Texture of Oxide Scales during Hot Rolling of Low Carbon Steel Variant Selection during the Transformation of Deformed Austenite in a Niobium Bearing TRIP Steel Lamellar Subdivision during Accumulative Roll Bonding of a Titanium Interstitial Free Steel Effect of Initial Texture on the Evolution of Texture and Stored Energy during Recrystallization of Interstitial Free Steel Effect of the Rolling Draughts on the Evolution of Textures and Microstructures in 17.5 Cr-1.1 Mo Ferritic Stainless Steel Sheet Texture Evolution during Cold Rolling of Low and High Carbon Steel. Measurement and Simulation The Effect of Initial Orientation and Rolling Schedule on Texture Development in Duplex Steel Multiscale Characterisation of the Transformation Texture in a High Performance Steel Cube Texture Formed in Biaxially Rolled Low-Carbon Steel An EBSD Investigation on Deformation-Induced Shear Bands in Ti-Bearing IF-Steel under Controlled Shock-Loading Conditions The Study of Texture Development of High Temperature Oxide Scales on Steel Substrates Using Electron Backscatter Diffraction Microstructure and Texture Evolution of Cold Worked 304 Stainless Steel Experimental and Modelling Analysis of Texture Formation and Microstructure Characteristics of Cold Rolled IF Steel Sheets Study on the Micro Mechanism of Recrystallization Texture Formation in Cold-Rolled IF Steel Sheet Texture, Microstructure and Second-Phase Particles in a Ti+P Interstitial Free (IF) Steel Rolling and Recrystallization Textures in Asymmetrically Rolled Silicon Steel Thin Strip Effect of Magnetic Annealing on Recrystallization Texture in Silicon Steel Thin Strip Texture Changes of Carbon Steel and Stainless Steel as a Result of Wear Orientation Relationship during Partial - -Phase Transformation in Microalloyed Steels Grain Boundary Nature and Localized Corrosion in 304 Austenitic Stainless Steel Microscale Characterisation of Deformed Microstructures of TRIP-Assisted and Multiphase Steels Characteristics of Recrystallization Texture Evolution in High Magnetic Field for Interstitial Free (IF) Steel Sheet Texture Development during Final Annealing in Nonoriented Electrical Steels Texture Evolution during Direct and Reversed Hot Torsion Tests of Stabilized Ferritic Stainless Steels A Study of Local Microstructure and Texture Heterogeneities in a CGO Fe3%Si Alloy from Hot Rolling to Primary Recrystallization Recrystallization Texture and Microstructure Formation in Heavily Rolled IF Steel Study of Microstructure and Texture Formation in a (Ti+Nb)-IF Steel after Ultra High Levels of Cold Rolling and Annealing Effect of Rolling Temperature, Reduction and Alloying Additions on the Texture of Warm Rolled Steels Monte Carlo Modeling of Low Carbon Steel Recrystallization: Role of Thermo-Mechanical Treatment and Chemical Composition Development of Cold Rolling and Intercritical Annealing Texture in Two TRIP-Aided Steels Influence of Starting Microstructure on Texture Development in Cold Rolled and Annealed Low Carbon Steel Strip Comparison between the Growth Behaviour of the Small Goss Grains and that of the Large Matrix Grains in Silicon Steels. Influence of the Textured Cluster Presence Study of Texture Development and Anisotropy of Mechanical Properties of API-X80 Line Pipe Steel for Spiral-Welded Pipe Influence of Boron on Mechanical Properties and Microstructures of Hot-Rolled Interstitial Free Steel Texture Optimization in Non-Oriented Electrical Steels: The Role of the Goss Texture Component Modelling of Recrystallisation Kinetics and Texture during the Thermo-Mechanical Processing of Aluminium Sheets Friction Effects on Through-Thickness Texture Evolution during Rolling Recrystallization Texture and r-Value of Rolled and T4-Treated Al-Mg-Si Alloy Sheets Texture Formation during High Temperature Deformation of Al-3mass%Mg Solid Solution Texture Segregation and Texture Change in the Biaxial Stretching of AA6016 Producing a Random Recrystallization Texture in 6111 Aluminium Alloy Microstructure and Texture Control of Al-Mg Alloy Sheets by Differential Speed Rolling Rolling and Recrystallization Textures in High Purity Al Cold Rolled to Very High Rolling Reductions Uniformity of Grain Coarsening in Submicron Grained Al-Sc Alloy Containing Local Variations in Texture AluMATTER, a New Interactive E-Learning Tool Texture Development in Pure Mg and Mg Alloy AZ31 Dynamic Recrystallization during Compression of Mg-3%Al-1%Zn Characteristics of Hot Compressed Magnesium Alloy AZ31 with Initial Textures Analyzed by Orientation Mapping Texture, Tensile Properties and Press Formability of Mg-3Al-1Zn/Ti Clad Sheets Produced by Roll-Bonding Role of Deformation Twinning in Cold Rolling and Recrystallization of Titanium Anisotropic Tensile Properties at Room and Elevated Temperatures in Warm-Extruded AZ61 Magnesium Alloy s Variant Selection in Sharp hcp Textured Regions of a Bimodal IMI834 Billet The Martensitic Transformation Texture in Ti-6Al-4V Evolution of Texture in Zirconium Alloy Tubing during Processing Phase Transformation Textures in Ti-6Al-4V Alloy Bulk Texture and Structure Changes in Tubes of Zr Alloys due to the Long-Range Effect of Ion-Plasma Surface Treatment Texture Evaluation of Titanium Aerospace Alloy Ti 834 Using Hot Axisymmetric Compression Tests Deformation and Recrystallisation of bcc Mg Li The Role of Crystallographic Texture of Ti-6Al-4V Alloy on Cell Attachment and Proliferation Influence of Deformation Substructures on the Early Mechanisms of Recrystallization in Cold-Rolled Titanium and Zirconium Textures Applied to Mechanical Processing Technology Assessment in Ancient Bronze Texture Control in Silver Textures and Local Textures in Severely Cold-Rolled and Annealed Ultra-Fine-Grained FeCo Alloy Anisotropy in Cold Rolling of Single Crystalline Ni3-Al-Base Intermetallic Alloys Dynamic Recrystallization of Torsion Deformed NiAl Development of Growth Texture in Nanocrystalline Fe-Ni Alloys Effect of Thermomechanical Parameters on Texture of 90-10 Brass Sheets A Study of the Early Stages of Recovery in Cold Rolled {110}<001> Oriented Copper Single Crystals Plane Strain Compression of Single Crystalline Ni3Al-Base Intermetallic Compounds ECAE of Al-4%Cu Alloys: Experimental Study Assisted by Polycrystalline-FEM Simulations Texture Formation during Severe Plastic Deformation Texture Evolution during ECAP and Subsequent Annealing of an AlMg1Mn0.14 Alloy Evolution of Texture in ARB Processing of Al 99.8 % R-Value and Texture Change of AA 1050 Al Alloy Sheet by Equal Channel Angular Pressing Texture Development in Interstitial Free (IF) Steel Subjected to Two Cycles of Equal Channel Angular Extrusion Orientation Evolution during Equal Angular Channel Extrusion of Copper Single Crystal Texture Gradient in ECAP Silver Measured by Synchrotron Radiation Formation of Inhomogeneous Texture and Structure in Metal Materials under Equal-Channel Angular Pressing Heterogeneity of Deformation in Pure Ni Single Crystal of Cube Orientation Deformed by Equal Channel Angular Extrusion Experiments and Modelling of ECAE Textures of f.c.c. Polycrystals Evolution of Microstructure and Texture during Annealing of a Copper Processed by ECAE Texture of Al-Cu Alloys Deformed by ECAP Equal Channel Extrusion Heterogeneities in Recrystallized Copper Analysis of Textures of Wires Drawn in Pressure and Roller Dies with ODF Variance of the Grain Boundary Character Distribution Deformation and Recrystallization Texture of Heavily Drawn OFHC Copper The Role of Microstructural Aspects on the Performance of Coarse-Grained Superplastic Al Alloys Effect of Thermomechanical Treatment on the Texture Evolution and Superplasticity of a Zn-0.3wt.% Al Alloy Textural and Microstructural Inhomogeneities in Drawn and Annealed OFHC Copper Wire Microtexture Analysis of Friction Stir Welded Al 6061-T651 Plates High Tensile Strength of Drawn Gold On Crystallographic Texture of As-Drawn Doped-W Wires Neutron Diffraction Measurements of Deformation and Recrystallization Textures in Cold Wire-Drawn Copper The Alignment of Low Angle Boundaries during Deformation A Texture Evolution Study Using the Texture Component Crystal Plasticity FEM Orientation Fragmentation in Copper, Nickel and Aluminum: A Comparative Study of the Nucleation Process Improving the Self-Consistent Predictions of Texture Development of Polycrystals Incorporating Intragranular Field Fluctuations Local Texture Evolution by Rate-Independent Polycrystal Model Allowing for Coordination of Interacting Crystals Influence of Selectivity of Shear Systems on Deformation Texture Processing Path Model to Describe Texture Evolution during Mechanical Processing Quantitative X-Ray Analysis of Deformation Microtexture within Individual Grains An Intermediate Viscoplastic Model for Deformation Texture Evolution in Polycrystals Reaction Stress Model and Relaxation of Reaction Stress among the Grains during Tensile Deformation of fcc Metals Modeling Texture, Twinning and Hardening Evolution during Deformation of Hexagonal Materials A Dislocation Density Based Constitutive Model for Crystal Plasticity FEM Testing Polycrystal Plasticity Models on Observed Lattice Rotations and Dislocation Structures A Combined Finite Element and Self-Consistent Model
• Validation by Neutron Diffraction Strain Scanning Experimental Study on the Influence of Grain Boundaries on the Subdivision Behaviour of Al-3%Mg Polycrystals during Cold Deformation Using Electron Backscatter Diffraction Effect of the Strain Reversal on Grain Boundary Character and Substructure Development on a Hot Worked Austenitic Stainless Steel The Role of Texture, Temperature and Strain Rate in the Activity of Deformation Twinning Latent Hardening in Copper and Copper Alloys Analysis of Intragranular Misorientation Related to Deformation in an Al-Mg-Mn Alloy Evolution of Internal Stresses during the Plastic Deformation of IF Steel and Their Correlation with Crystal Orientation Survival of Goss Grains during Cold Rolling of a Silicon Steel Single Crystal Shear Banding in Twinned Structures and Their Influence on Brass-Type Texture A Direct Method for Determining the Orientation-Dependent Lattice Strain Distribution Function from Diffraction Strain Pole Figures Texture, Twinning and Uniform Elongation of Wrought Magnesium Origin of the Deformation Microstructure in IF Steel after Medium Cold Rolling Reductions A Texture Based Model for Polycrystal Plasticity The Effect of Strain Path Change on Texture Evolution at Finite Strain of Multiphase Steel: Numerical and Experimental Investigations Texture Prediction of an AA3004 Aluminum Alloy with the Occurrence of Strain Localization during Simple Shear Using a Multi-Scale Modeling Procedure Study and Modelling of Some Variant Selections in bcc to hcp Phase Transformations Impact of Local Texture on Recrystallization and Grain Growth via In Situ EBSD Solid State Phase Transformations under High Magnetic Fields in a Medium Carbon Steel Transformation Textures in Steels The Control of Texture and Grain Boundary Microstructure by Magnetic Annealing Dynamic Twin Nucleation at Triple Junctions in Fe-32%Ni Stainless Steel Magnetic Field Effect on the Microstructure of Low Silicon Steel Abnormal Grain Growth and Texture Development Representation of Misorientations in Rodrigues-Frank Space: Application to the Bain, Kurdjumov-Sachs, Nishiyama-Wassermann, Pitsch and Greninger-Troiano Orientation Relationships Monte-Carlo Version of Vertex Model Applied to Recrystallization Modeling Nucleation of Secondary Recrystallization in Ultra Low Carbon Steel Nucleation and Texture Development during Dynamic Recrystallization of Copper A Study of the -to- Transformation Using EBSD Techniques Simulation of Recrystallization Textures in fcc Materials Starting from Self-Consistent Modelling Results Effect of Deformation Texture Component Composition on Cube Texture Formation during Primary Recrystallization in Ni-Based Alloys Calculation of the Parent hcp Grain Orientation from Inherited Variants in the hcp to t and in the hcp to cc Phase Transformations Application to the - Transformation in TiAl-Based Alloys Micromechanisms Involved in Grain Boundary Engineering Effect of Hexagonal Crystal Structure Anisotropy on the Selective Grain Boundary Mobility during Texture Formation and Secondary Recrystallization in Zn Prediction of Earing in IF Steels by Using Crystal Plasticity Finite Element Method Effect of Stacking Fault Energy on Evolution of Recrystallization Textures in Drawn Wires and Rolled Sheets Mechanisms of New Orientation Formation during Recrystallization of Old Deformed Aluminium Bicrystals Grain Boundary Energy and Grain Growth in Highly-Textured Al Films and Foils: Experiment and Simulation The Effects of a High Magnetic Field on Microstructure, Grain Boundary Structures and Texture in a Medium Carbon Steel under Different Cooling Rates Transformation Texture Formation at Cold-Rolled Ultra Low Carbon Steel Surfaces Origins of Cube Recrystallization Textures in Heavily Rolled High Purity Al Texture Evolution during Grain Growth under the Influence of Mechanical Stresses Orientations of Recrystallization Nuclei Studied by 3DXRD Influence of Thermo-Mechanical Treatments on the Stored Energy Simulated by FEM for Two Low Carbon Steels Recrystallization in an IF-Ti Steel after Low Deformation Amount by Tensile Strain EBSD Study of Annealing Twinning during Recrystallization of Cold Rolled Copper The Orientations of Nuclei at Triple Junctions in Deformed Columnar Grain Ni Cube Texture Development in Pure Ni during Annealing in a High Strength Magnetic Field Texture Evolution in Thin Cu Films and Lines Texture in Thin Films In-Line Phase and Texture Control in Microelectronics Industry YBCO Coated Conductor Applications - A Texture Problem Residual Stress Analysis of Microwave Plasma CVD Diamond Films Microstructure and Texture in Free-Standing CVD Diamond Films The Texture Effect on Diffusion Barrier Property on TiN Films between Copper and Si Wafer Texture Investigation in Cu Damascene Interconnects during Annealing Epitaxial Growth of Textured YBa2Cu3O7- Films on Silver Texture Development in Nd-Fe-V Alloys by Hot Deformation in View of Permanent Magnet Properties Texture of Alumina by Neutron Diffraction and SEM-EBSD Product and Component Grain and Domain Textures in Ferroelectric Ceramics Effect of Hot Working on the Microstructure and Thermoelectric Characteristics of (Bi, Pb)-(Sr, Y)-Co-O Oxide The Correlation of Texture and Microstructure to the Corrosion Resistance of Tin Coatings The Role of Special Boundaries during Solidification and Microstructure Evolution in Lead Free Solder Joints Texture Studies on Borocarbide Thin Films Thermomechanical Properties of Nickel Silicide: Dependence on the Microstructure Cube Texture Formation in P/M Ni, Ni-W and Ni-Mo Alloy Tapes for Coated Superconductor Applications Orientation and Microstructure Dependence of Electromigration Damage in Damascene Cu Interconnect Lines New Interpretation of the Influence of Various Parameters on Texture Evolution in Damascene Cu Interconnect Lines Quantitative Texture Analysis of Electrodeposited Line Patterns The Influence of Palladium Addition on the Texture Transition in Silver Investigation of Local Texture Correlations in Bi-2223 High Temperature Superconductor Tapes Strain Dependence of Magnetic Anisotropy in Low-Carbon Production Steels Anisotropic Increase in Yield Strength by Straining and Baking of Bake-Hardenable Steel Texture Development during Mechanical r-Value Determination Toughness Anisotropy in Intercritically Rolled Steel Plates Allowance for Internal Microstresses and Texture in Evaluation of Residual Stresses in Cold-Drawn Steel Wires with Micromechanical Models X-Ray Study of Microstresses in Lamellar Pearlite The Effect of Anisotropic Yielding Behaviour on Cold Rolling Forces Interactive Texture- and Finite-Element Simulation Including the Bauschinger Effect Simulation of Earing during Deep Drawing of bcc Steel by Use of a Texture Component Crystal Plasticity Finite Element Method Texture-Based Explicit Finite-Element Analysis of Sheet Metal Forming Flow Stress Anisotropy - Effect of Microstructure and Texture in Aluminium and IF Steel Influence of the Cube-Texture and the Grain Growth on the Creep Behavior in Platinum-10%Rhodium Alloy Effects of Texture and Anisotropy on Intergranular Stress Development in Zirconium Finite Element Simulation of Earing of AA3104 Sheets Using CMTP Yield Criterion Texture Evolution and Earing in Aluminium Can Sheet Effect of Plastic Anisotropy on Forming Limit Prediction The Effect of Texture on Friction of AlSl304 Stainless Steel The Texture Evolutions of Mg Alloy, AZ31, under Uni-Axial Loading Measurement and Calculation of Elastic Properties in Low Carbon Steel Sheet Work Hardening and Textures in hcp Materials Simulation of Texture Development of Plane Carbon Steel in Multipass Rolling Using Analytical Flow Function Modeling of Length Changes and Textures during Free End Torsion of Cylindrical Bars Plastic Anisotropy and Texture Evolution of Rolled AZ3l Magnesium Alloys Crystal Plastic Finite Element Simulation of Fe-Cu Polycrystals Simulation of the Lattice Strains Developed during a Tensile Test on a Multiphase Steel Synchrotron Radiation Investigation of Twinning in Extruded Magnesium Alloy AZ3l Simulation of Cup-Drawing Based on Crystal Plasticity Applied to Reduced Grain Samplings Effect of Annealing Temperature on Texture and Creep Anisotropy in Ti3Al2.5V Alloy The Application of ODF Analysis for Drawing Sheet of Weak Textured Materials Prediction of Texture Induced Anisotropy by Through-Process Modelling Structure and Crystallographic Texture of Arthropod Bio-Composites Determination of Morphological Textures of the Fibres in Composite Materials Made from Textiles of Carbon Fibres Texture Evolution during Roll-Cladding of a Composite of Five Plies of Ferritic Stainless Steel and Aluminium Sheets Thermal Stress and Texture Development in a Cu/Nb Composite between 4K and 1273 K Pole Figure Measurement Plan Influence on Accuracy ODF Coefficients Determined by Modified Harmonic Method

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA76177339
• ISBN:
  • 087849975X
• LCCN: 2005284349
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Uetikon-Zuerich, Switzerland
• ページ数/冊数: xxxv, 1712 p.
• 大きさ: 25 cm
• 分類:
  • LCC : TA401.3
  • LCC : TA418.5
• 件名:
  • LCSH : Materials -- Texture -- Congresses
  • LCSH : Metals -- Texture -- Congresses
• 親書誌ID:
  • BA00294222