Advanced powder technology IV : proceedings of the 4th International Latin-American Conference on Powder Technology, November 19-21, 2003, Guaruja-Sao Paulo, Brazil

著者

• Conference on Power Technology
• Salgado, Lucio
• Filho, Francisco Ambrozio

書誌事項

Advanced powder technology IV : proceedings of the 4th International Latin-American Conference on Powder Technology, November 19-21, 2003, Guaruja-Sao Paulo, Brazil

edited by Lucio Salgado and Francisco Ambrozio Filho

（Materials science forum, v. 498-499）

Transtech Publications, c2005

注記

Includes bibliographical refernces and index

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This interesting volume focuses on the technology of metal and ceramic powders; particularly with regard to powder production, spray-forming, powder compaction and sintering, mechanical alloying, corrosion of PM parts and biomedical applications. Also treated are powder production, sintering mechanisms, sintering furnaces, injection moulding and ceramic processing, automotive applications and future perspectives.

目次

Development of a Spray Dryer Device to Produce Ammonium Niobium-Oxalate Precursor Centrifugal Atomization of Metals: Thermodynamics of the Process On the Compacting of Powders of the Systems Fe-Cu and Fe-Cu-Diamond Deposition of Sn-Al Onto Aluminum Powder in Its Self-Convective Motion by DC Sputtering Explosion Study of an Iron Powder Reduction Furnace Characterization of Ti-35Nb-7Zr-5Ta Alloy Produced by Powder Metallurgy Microstructural Evolution of Ti-13Nb-13Zr Alloy during Sintering The Use of High Energies Radiations to Characterise Solid-Liquid Systems Microstructural Evolution during Sintering of the P/M Blended Elemental Ti-5Al-2.5Fe Alloy A Study of Settling Techniques for Measurement of the Size Distribution of Solid Particles Organophilization of Four Differents Bentonitic Clays with a Quaternary Ammonium Salt Particle Size Distribution Analysis of an Alumina Powder: Influence of Some Dispersants, pH and Supersonic Vibration Machining and Mechanical Characterisation of PM Materials for Valve Seat Inserts Corrosion and Cytotoxicity Evaluation of AISI 316L Stainless Steel Produced by Powder Injection Molding (PIM) Technology Corrosion Protection of AISI 304 Stainless Steel Filters by a Surface Treatment An Investigation on the Corrosion Behaviour of Nd-Fe-B Magnets in a Chloride Solution Compressive Creep of Hot-Pressed Si3N4 Ceramics Using CRE2O3-Al2O3 or CRE2O3-AlN Additive Mixtures Microstructure and Magnetic Properties of Fe-6.5wt%Si Alloy Obtained by Spray Forming Process Effect of Calcination Conditions on the Magnetic Properties of MnZn Ferrites Powders Produced by Co Precipitation The Influence of Pr Concentration on the Magnetic Properties of Pr-Fe-Co-B-Nb HDDR Magnets Determination of Intrinsic Magnetic Parameters of SmCo5 Phase in Sintered Samples Determination of the Constants of Magnetocrystalline Anisotropy in Sintered Magnets with Uniaxial Texture Effect Ni Addition of the Cu-Al Powder by Mechanical Alloying Preparation of Nb-40Ti Powders by High-Energy Milling Combustion Synthesis of Mechanically-Activated Nb-Al Mixtures Production and Characterization of Aluminium NbAl3 Composite by Mechanical Alloying and In Situ - A Process Comparison On the Use of Stainless Steel Water Atomized Powders for Injection Molding Regarding Corrosion Resistance Titanium Powder Processing with Binder Addition for Biomedical Applications Computational Fluid Dynamics Techniques for Flows in Lapple Cyclone Separator Effect of Heat Treatment on Microstructure of Commercial and Vacuum Sintered High Speed Steels AISI M2 and T15 Sintering Behavior of NbC-Reinforced Steel Cellular Concrete with Addition of Aluminum Recycled Foil Powders The Development of an Innovative P/M Oil Control Ring from Concept to Production Line Densification Study of Titanium Powder Compacts The Role of the Apparent Density on the Permeability of Porous Stainless Steel Parts Study of the Diamond 5%wt- Cobalt Sintering under the HPHT Lowest Limit Pressure Assisted WC-15%wt Co Sintering Sinterability of High-Speed Steels M2, M3/2 and T15 High-Speed Steels Produced by Conventional Casting, Spray Forming and Powder Metallurgy Microstructural Characterisation by Scanning Electron Microscopy of Spray Formed Al/SiCp Matrix Composite Consolidation of Compacted Zircaloy Chips via Vacuum Arc Melting - Analysis of the Electric Arc Computational Fluid Dynamics Applied to Bradley Hydrocyclones Simulation of Spouted Bed Using a Eulerian Multiphase Model A Study of the Rejects Recovery in a Column Flotation The Nitriding of Ferrous Powder Alloys - Mathematical Modelling and Simulation Humidity Sensitive Characteristics of ZnO-TiO2-Ta2O5 Ceramic Chemical Synthesis by Pechini Method for Obtation of ZnO Varistors Evaluation of the Effect of Heavy Rare Earth Elements on Electrical Resistivity of Zirconia-Yttria Ceramics Characterization of Strontium Ferrites Powders Obtained by High Energy Milling Monofilamentary Ag/Bi:2212 Tapes - Effects of Silver Powder Addition Microstructure and Some Microwave Properties of Ba2Ti9O20 Doped with ZrO2 Microstructure and Microwave Characterization of SrO2 -Ba2 Ti9 O20 Dielectric Resonators for Telecommunications Applications Phase Amorphization during High-Energy Milling of Mixtures of Zirconia with Yttria or Ceria Powders Use of Impedance Spectroscopy in the Study of the Effect of Cr Concentration on the Electrical Properties of SnO2-Based Ceramics Influence of Mg on the Structural and Optical Properties of LiNbO3 Thin Films Grown by Polymeric Precursor Method Fracture Toughness of SiC-Cu Based Alloys Cermets Sintering Behavior of Si3N4-TaC Based Composites Influence of NbC-Addition on Mechanical Properties of WC-Co Ceramic Composites Derived from Nb/Al2O3-Filled Polysilsesquioxane Ceramic Composites Derived from Polysiloxane/Al/Nb by AFCOP Process Comparison of Physical and Mechanical Properties in Ceramics Composites Si3N4-CTR-AlN and Si3N4-Y2O3-AlN The Changes on Microstructure and Electrical Properties of Bi:2223/Ag Composite as a Function of the Granulation and the Content of the Added Silver Powder Alkaline Activation of Kaolinitic Soils for the Production of Special Binders Addition of Polyurethane to Portland Cement Composites of Portland Cement and Natural Polymers Chemical Vapor Densification Process of Carbon Fiber Substrates Study of the Potentiality of Residue from Kaolin Industry as Ceramic Raw Material to Produce Porcelanate Gres Recycling of Silicon Carbide and Corn Starch as Binder Originating from Commercial Starch Consolidation Using Experiments Design to Model Linear Firing Shrinkage of Triaxial Ceramic Bodies A Method to Optimize Ceramic Masses for Coatings through Delineation of Experiments Safe Use of Natural Gas in Ceramic Furnace Burners Clays from Southern Brazil: Physical, Chemical and Mineralogical Characterization Electron Beam-Physical Vapour Deposition of Zirconia Co-Doped with Yttria and Niobia Methodology for Prediction of Desired Mechanical Properties as a Function of Mixture Components The Use of Electrochemical Techniques for Ceramic Filtration Medium Cleaning Replacing Coal by Tire Powder in Ceramic Industry Wet Processing of Triaxial Ceramics Using a Mixture Design Approach Dimension Stone Cutting with AWJ Methods Synthesis, Rheological Behavior and Mechanical Characterization of Structural Fast-Setting Geopolymers Densification Study of SiC:Al2O3:Y2O3 with Polymer Additions Solid Galvanic Wastes Incorporation in Glass Matrices Tetragonal-to-Monoclinic Transformation Influence on the Mechanical Properties of CeO2- ZrO2 Ceramics Thermal Characterization of Sintered Clay-Petroleum Waste Mix by the Photoacoustic Technique Utilization of Granite Powder Waste in Ceramic Bodies for Civil Construction Production, Sintering and Microstructural Characteristics of Ba2MgWO6 Ceramics Sintering, Microstructure and Mechanical Properties of Ba2HoWO5.5 Ceramics Synthesis and Thermal Characterization of Luminescent Powers of Terbium (III) with Mixed Ligands Anelastic Spectroscopy in TiO2 Study of PSZ Sintered in Low Oxygen Partial Pressure Influence of the Granulometry of Organic Matter Ashes from Municipal Solid Waste on the Properties of Vitrified Ceramics Sintering of a Clay Material with Granite and Marble Reject Anelastic Spectroscopy in Al2O3 Oxidation Behavior of Hot-Pressed Si3 N4 Ceramics Using CRE2 O3 -AlN and CRE2 O3 -Al2 O3 as Sintering Additives Creep Behavior of Multi-Cation -SiAlON Partially Stabilized Produced with an Yttrium-Rare Earth Oxide Mixture(CRE2O3) Anelastic Spectroscopy in Superconducting Oxides Molybdenum Silicides as a Bonding Phase in Diamond Composites Biofunctionalization of Glass Powder by Cold-Plasma Technique Effect of the Calcination Time of Fish Bones in the Synthesis of Hydroxyapatite Evaluation of Procera/Porcelain Interface in Metal-Free Prosthesis Synthesis and Characterization of NiO-8YSZ Powders by Coprecipitation Route Nickel Ferrite: Combustion Synthesis, Characterization and Magnetic Properties Ce0.8Gd0.2O1.9 Powders Synthesized by Co-Precipitation and Amorphous Citrate Processes Synthesis of La0.8 Sr0.2 MnO3+/- Powders by Amorphous Citrate and Pechini Techniques Doped Tin Oxide Nanometric Films for Environment Monitoring Synthesis and Characterization of 0.9PMN-0.1PT Powders by the Use of a Modified Columbite Precursor Synthesis of WC Powders by Reactive Milling Obtaining of the Ceramics Pigments (Fe, Zn)Cr2O4 Using Waste of Electroplating as Raw Material Aluminas by Thermal Activation of Fibrillar Pseudoboehmite Powders Combustion Synthesis of Cu1-xNixCr2O4 Spinel for Catalytic Applications Physical Characterization of K-Doped 0.9PMN-0.1PT Synthesized by an Association of the Columbite Route and the Polymeric Precursor Method A Low Cost ZSM-5 Zeolite Obtained from Rice Hull Ash Red Ceramic Materials Durability Evaluation Synthesis and Characterization of Modified Clays as Sorbents of Toluene and Xylene Hazardous Wastes Disposal: Stabilization/Solidification of Tannery Residue in the Presence of Chromium Influence of Tin Oxide Addition in the Morphologic Characteristics of Zinc Oxide Powders Synthesized by Pechini's Method Toluene, Xylene and Diesel Oil Sorption by Brazilian Organoclays Characterisation of Titanium Nitride Thin Films Deposited by Cathodic Arc Plasma Technique on AISI D6 Tool Steel Preparation and Characterization of NiAl2O4 Powder by the Pechini and Combustion Methods Characterization of Granite Waste for Incorporation in Red Ceramic Complex Carbon-Mineral Sorbents from Common Clay A Study of the Influence of Organic Compounds during the Cement Hydration by Using XRD and DTA Synthesis of Niobium Carbide from Ammonium Niobium (V) Oxalate Precursor at Low Temperature in Rotating Cylinder Reactor

「Nielsen BookData」 より

• NII書誌ID(NCID): BA76177485
• ISBN:
  • 0878499849
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Zurich-Uetikon, Switzerland
• ページ数/冊数: xiv, 760 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA00294222