Nanomaterials by severe plastic deformation : NanoSPD3 : proceedings of the 3rd Conference on Nanomaterials by Severe Plastic Deformation held at Fukuoka, Japan on September 22-26,2005

著者

• International Conference on Nanomaterials by Severe Plastic Deformation
• 堀田, 善治 ホリタ, ゼンジ

書誌事項

Nanomaterials by severe plastic deformation : NanoSPD3 : proceedings of the 3rd Conference on Nanomaterials by Severe Plastic Deformation held at Fukuoka, Japan on September 22-26,2005

edited by Zenji Horita

（Materials science forum, v. 503-504）

Trans Tech, c2006

注記

Includes bibliographical references and index

内容説明・目次

内容説明

Severe Plastic Deformation (SPD) has proved to be an attractive tool for obtaining ultrafine-grained and nanocrystalline materials in bulk form; free of defects such as pores and impurities. Volume is indexed by Thomson Reuters CPCI-S (WoS).

目次

Some New Trends in SPD Processing for Fabrication of Bulk Nanostructured Materials Nanocrystalline Structure in Steels Produced by Various Severe Plastic Deformation Processes Developing a Model for Grain Refinement in Equal-Channel Angular Pressing Effect of Initial Grain Size, Die Angle and Pass Sequence on the Formation of Ultrafine Grain Structure in Cu by ECAP Local Investigations of the Mechanical Properties of Ultrafine Grained Metals by Nanoindentations The Positive Role of Back-Pressure in Equal Channel Angular Extrusion On the Grain Refinement Mechanisms in SPD - Applying High Resolution Electron Microscopy and the LEDS Approach On the Microstructure of HPT Processed Cu under Variation of Deformation Parameters Deformation Induced Vacancies with Severe Plastic Deformation: Measurements and Modelling Influence of Processing Parameters on Texture and Microstructure in Aluminum after ECAP Processing of Ultrafine-Grained Cu-Fe-Cr Composite by Equal Channel Angular Pressing Creep and Mechanical Properties of a Commercial Aluminum Alloy Processed by ECAP An Investigation of Cavitation in the Tensile Testing of a Spray-Cast Aluminum Alloy Processed by ECAP Effects of Severe Plastic Deformation: Mechanical Properties and Beyond Texture Formation during ECAP of Aluminum Alloy AA 5109 Influence of Cu on the Mechanical Properties of an Al-4.4wt%Mg Alloy after ECAP An Investigation of Deformation in Copper Single Crystals Using Equal-Channel Angular Pressing Superplastic Deformation of Ultrafine Grained Al Alloy Processed by ECAP and Post-Rolling Deformation Twins Formed in Nanocrystalline Materials Subgrain Size-Distributions, Dislocation Structures, Stacking- and Twin Faults and Vacancy Concentrations in SPD Materials Determined by X-Ray Line Profile Analysis Grain Boundary Diffusion-Controlled Processes and Properties of Bulk Nanostructured Alloys and Steels Microstructure and Thermal Stability of Ultra Fine Grained Mg-Based Alloys Prepared by High Pressure Torsion Fracture Toughness in Ultra Fine-Grained Magnesium Alloy Enhancement of Ductility and Strength through Microstructural Refinement by FSP of Nickel Aluminum Bronze Microstructural Evolution during Friction Stir Welding of Ultrafine Grained Al Alloys Crystal Restoration during Severe Plastic Deformation Channel Configuration Effects in 3D-ECAP Large Straining Behavior and Microstructure Refinement of Several Metals by Torsion Extrusion Process Size Effects in Plasticity: Experiments and Simulations Simulation of Equal-Channel Angular Extrusion Pressing Deformation Mechanism of Nanocrystalline Al-Fe Alloys by Analysis from Ab-Initio Calculations Modeling and Simulation of Crystal Plasticity Based on GN Crystal Defects for Ultrafine-Grained Metals Induced by Severe Plastic Deformation Equal Channel Angular Pressing of Metallic Powders for Nanostructured Materials Microstructure and Mechanical Property of Nano-Duplex Materials Produced by HRS Process Synthesis of Bulk Materials by Equal Channel Angular Consolidation of Particles Indentation-Induced Deformation Behavior in Martensitic Steel Observed through In Situ Nanoindentation in a Transmission Electron Microscopy Inhomogeneity of Microstructure and Creep of ECAP Aluminium Spatial Uniformity of the Rate of Grain Coarsening in a Submicron Al-Sc Alloy Produced by Severe Plastic Deformation Mechanical Properties of Ultrafine Grained Metals under Cyclic and Monotonic Loads: An Overview Monotonic and Cyclic Behavior of Ultrafine Grain Metals:Overview Evolution of Microstructure and Precipitation in Heat-Treatable Aluminium Alloys during ECA Pressing and Subsequent Heat Treatment Effect of the Temperature of Accumulative Roll Bonding on the Microstructure and Properties of Twin-Roll Cast AA8006 Alloy Microstructure and Mechanical Properties Resulting from Conventional Cold Extrusion of Equal Channel Angular Extruded Aluminium Alloy AA6101 Effect of Second Phase Particles on Ultra-Fine Grain Evolution during Multi-Directional Forging of Austenitic Stainless Steel Magnetic Properties and Microstructure of a FeCo Ferritic Steel after Severe Plastic Deformation Deformation Microstructures in a Two-Phase Stainless Steel during Large Strain Deformation Ultra Grain Refinement of Low C Steels by Accumulative Roll Bonding Deformation Behavior of Ultrafine Grained Iron On Structural Mechanism of Continuous Recrystallization in Ferritic Stainless Steel after Large Strain Processing High Z - Large Strain Deformation Processing and Its Applications Application of Twist Extrusion Hydrostatic Extrusion as a Method of Grain Refinement in Metallic Materials Recrystallized Grain Size in Severely Deformed Pure Copper Outlook for Manufacturing Materials by Severe Plastic Deformation Historic Retrospection and Present Status of Severe Plastic Deformation in China Scaling up of Equal Channel Angular Pressing (ECAP) for the Production of Forging Stock Deformation Mechanics Associated with Formation of Ultra-Fine Grained Chips in Machining Continuous Grain Refinement Using Severe Torsion Straining Process Application of High Pressure Torsion to Bulk Samples Specific Features of the Strengthening during Severe Plastic Deformation of Supersaturated Solid Solutions Differences in Structural Evolution in Single- and Dual-Phase Materials during Severe Plastic Deformation Formation of Supersaturated Solid Solutions in Al Alloys with Transition Metals Upon Shear under Pressure Martensitic Transformation and Mechanical Behavior of TiNi Shape Memory Alloys after Severe Plastic Deformation New Routes for Synthesizing Massive Nanocrystalline Materials 3D-Atom Probe Investigation of Vacancy Induced Interdiffusion during High Pressure Torsion Deformation A New Deformation Mechanism in Nanoscale Fe-C Composite as a Result of a Stress-Induced Transformation Ultrafine Grained Dual Phase Steels Fabricated by Equal Channel Angular Pressing High Pressure Torsion of Rail Steels Dissolution of Cementite in Carbon Steels by Heavy Deformation and Laser Heat Treatment ECAP Processed Copper during Deformation and Subsequent Annealing Deformation Behavior of Fine Grained Al-Mg Alloy under Biaxial Stress Studies of Severe Plastic Deformation Conditions for Amorphous and Nanocrystalline Structures Formation in Ti-Ni Based Alloys Effect of Equal-Channel Angular Pressing on the Pitting Corrosion Resistance of Al Alloy Microstructure Evolution and Aging Kinetics of Al-Mg-Si and Al-Mg-Si-Sc Alloys Processed by ECAP Hydriding Properties of the Mechanically Deformed Mg-Ni Alloys Strain Rate Effect on Fine-Grain Development in 7475 Al Alloy during Hot Multidirectional Forging Low Carbon Low Alloy Submicro-Steel with Nano-Precipitation Development of Complex Methods, Combining Thermal Treatment with Severe Plastic Deformation, for Processing of High-Strength Nanostructured Cu-1%Cr-0.7%Al Alloy Strain-Induced Grain Refinement in Magnesium Alloy AZ31 during Hot Forging Equal Channel Angular Pressing of Magnesium Alloy Containing Quasicrystal Phase Microstructure, Texture and Deformation Mechanism of Zr702 Processed by Equal Channel Angular Pressing (ECAP) Effect of Equal Channel Angular Pressing and Repeated Rolling on Structure, Phase Transformations and Properties of TiNi Shape Memory Alloys SPD-Induced Nanocrystallization of Shape Memory Ni2MnGa-Based and NiTi-Based Alloys Quenched from Liquid State Hardening Viscous Failure and Strain Localization during Severe Plastic Deformation Single Roll Drive Equal Channel Angular Process -a Potential Severe Plastic Deformation (SPD) Process for Industrial Application Fabrication of a W-25%Cu Nanocomposite by High Pressure Torsion Structural Analysis and Properties of Bi2-xSbxTe3-ySey Prepared by Angular Extrusion Fabrication of Nano Grain Tungsten Compact by Mechanical Milling Process and Its High Temperature Properties Microstructure and Mechanical Properties of Pure Nickel Processed by Severe Plastic Deformation The Influence of the SPD Temperature on Superplasticity of Aluminium Alloys Increasing the Mechanical Properties of FCC- and BCC-Metals by Combined Cold Severe Plastic Deformation Substructure and Nanocrystalline Structure Effects in Thermomechanically Treated Ti-Ni Alloys Three-Dimensional Imaging of Shear Band Produced by ECAP Process in Al-Ag Alloy The Influence of the ECAP Temperature on Microstructure and Mechanical Properties of a Magnesium Alloy Microstructural Evolution in Pure Copper Severely Deformed by the ARB Process HPT-Deformation of Copper and Nickel Single Crystals Limit of Dislocation Density and Dislocation Strengthening in Iron Low Temperature Mechanical Properties of Different Commercial Purity Nanostructured Titanium Processed by ECA Pressing Elaboration by Severe Plastic Deformation, Microstructural and Mechanical Study of Cu/X (X =Ta or Nb) Nanofilamentary Wires for Use in High Field Magnet Mechanical Behaviour of Nanostructured Iron Fabricated by Severe Plastic Deformation under Diffusion Flow of Nitrogen Large Strain Deformation of Single-Phase Copper Solid Solutions by Machining Enhanced Ductility due to Grain Refinement by Equal Channel Angular Extrusion in Automotive Aluminium Alloy 6016 Heterogeneity and Anisotropy in Microstructure and Mechanical Properties of Pure Copper Processed by Equal Channel Angular Pressing Formation of Nanocrystalline Structure by Shot Peening Modelling of the Evolution of Dislocation Cell Misorientation under Severe Plastic Deformation Effect of Rolling Direction on the Microstructure and Mechanical Properties of Accumulative Roll Bonding (ARB) Processed Commercially Pure 1050 Aluminum Alloy Controlling Mechanism of Ferrite Grain Size Generated through Large Strain Deformation of 0.15C Steel Effects of the Number of ECAP Passes and ECAP Route on the Heterogeneity in Mechanical Properties across the Sample from Titanium VT1-0 Consolidation of Amorphous Al86Ni6Co2Gd6 Melt-Spun Ribbons by Twist Extrusion Microstructural Change of Beta Type Titanium Alloy by Intense Plastic Deformation Microstructure, Texture and Property Changes of High Purity Aluminium during Accumulative Roll Bonding and Conventional Rolling Severe Plastic Deformation of Commercially Pure Titanium by Rotary-Die Equal Channel Angular Pressing Method Fine-Grained Structure Formation in Al- Mg- Sc Alloy during Hot ECAP ECC Observations of Nanostructures Formed by Sliding Wear in Copper Microstructure and Mechanical Properties Resulting from Cold Rolling of Equal Channel Angular Extruded Commercial Purity Copper Metal Flow at Equal Channel Angular Pressing with Backpressure Mechanical Spectroscopy of High Pressure Torsion Deformed Fe-Based Alloys and Ti Nanocrystalline Formation during Mechanical Attrition of Cobalt Microstructural Features and Mechanical Properties of the Ti-6Al-4V ELI Alloy Processed by Severe Plastic Deformation Microstructure and Properties of Ti Rods Produced by Multi-Step SPD Mechanical Properties and Microstructure of Mg-Zn-Y Alloys Processed by ECAE The Microstructures and Mechanical Properties of Hot-Processed Magnesium Casting Alloys Strain Rate Sensitivity of Ultrafine Grained FCC- and BCC-Type Metals Gradient Structure Formation by Severe Plastic Deformation Evaluation of a Ni-20Cr Alloy Processed by Multi-Axis Forging The Effect of the Initial Orientation on Microstructure Development of Copper Single Crystals Subjected to Equal-Channel Angular Pressing TEM Investigations of Titanium Processed by ECAP Followed by Cold Rolling Fracture and Fatigue Resistance of Ultrafine Grain CuCrZr Alloy Produced ECAP Fabrication of Copper-Graphite Multifilamentary Composite Wire by Severe Plastic Deformation Microstructures and Electrical Properties Corrosion and Mechanical Behaviors of Cu-35%Zn Alloy Prepared by Equal Channel Angular Pressing (ECAP) Microstructure Development during Equal Channel Angular Extrusion of an Al-3%Cu Alloy Anelasticity and Structural Stability of ECAP Processed Al-Mg-Si Alloys Investigated by Mechanical Spectroscopy A Transmission Electron Microscopy Study of the Role of Sc+Zr Addition to a 6082-T8 Alloy Subjected to Equal Channel Angular Pressing Mechanical Properties of Fine-Grained AA1050 after ECAP Formation of Texture and Structure in Rods of Copper and Titanium under Equal-Channel Angular Pressing Features of Texture and Structure Development in Zirconium under Equal Channel Angular Pressing Improving the Mechanical Properties of AZ31 Mg Alloy by High Ratio Extrusion Severe Plastic Deformation of a Commercial Aluminium-Lithium Alloy (AA8090) by Equal Channel Angular Pressing Principals of Indirect Equal Channel Angular Drawing for Processing of Ultrafine Grained Materials Microstructure and Corrosion Behaviour of Ultrafine-Grained Copper Mechanical Properties of ECAP Processed Magnesium Alloy AS21X Fine-Grained Structures Associated with Deformation Twin and Its Influence on Tensile Behaviours in a Cold-Rolled Fe-Ni Alloy Corrosion and Mechanical Behaviours of Cu-Cr In Situ Composites Interfacial Structures of Cu-Nb Filamentary Nanocomposites in the As-Drawn and Annealed Conditions Martensite Transformation of Ultrafine Grained Austenite in Fe-28.5at%Ni Alloy Annealing Behavior and Recrystallized Texture in ARB Processed Copper Grain Boundary Structure in ARB Processed Copper Three Dimensional Numerical Investigation of Equal Channel Multi-Angular Pressing An EBSD Study of Texture and Grain Boundary Evolution in a Strongly Textured Aluminium Alloy during ECA Pressing Application of Severe Torsion Straining Process for Grain Refinement of Steel Microstructures and Mechanical Properties of Mg Alloy after Severe Torsion Straining Process Grain Refinement of Commercial Al-Mg Alloy Using Severe Torsion Straining Process Effect of Severe Plastic Deformation on the Structure and Properties of the Age-Hardenable Mg-Sm Alloys Hardening Mechanisms of Metals and Alloys Produced by SPD Structure and Mechanical Properties of Submicrocrystalline Copper Produced by ECAP to Very High Strains Grain Refinement by High Temperature Plane-Strain Compression of Fe-2%Si Steel The Effect of Equal-Channel Angular Pressing on Structure-Phase Changes and Superplastic Properties of Al-Mg-Li Alloy Dislocation-Crystal Plasticity Simulation Based on Self-Organization for Repartition of Dislocation Cell Structures and Subgrain Substructure of Ultrafine Grained Metals after Intensive External Influences at Study of Field Ion Microscopy Method Grain Boundary Sliding as a Significant Mechanism of Low Temperature Plastic Deformation in ECAP Aluminum Study of the Nanometric Grain Size Distribution in Iron Compacts Obtained by Mechanical Milling Effects of High Temperature ECAE Process on Microstructures and Martensitic Transformation of TiNi Shape Memory Alloy

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA76177565
• ISBN:
  • 0878499857
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Uetikon-Zuerich
• ページ数/冊数: xvii, 1030 p.
• 大きさ: 25 cm
• 分類:
  • DC21 : 620.11299
• 件名:
  • LCSH : Nanostructure materials -- Plastic properties
  • LCSH : Nanotechnology
  • LCSH : Deformations (Mechanics)
• 親書誌ID:
  • BA00294222