Microalloying for new steel processes and applications : proceedings of the International Conference on Microalloying for New Steel Processes and Applications 7th-9th September 2005, Donostia-San Bebastián, Basque Country, Spain
著者
書誌事項
Microalloying for new steel processes and applications : proceedings of the International Conference on Microalloying for New Steel Processes and Applications 7th-9th September 2005, Donostia-San Bebastián, Basque Country, Spain
（Materials science forum, v. 500-501）
Trans Tech, c2005
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and index
内容説明・目次
内容説明
The steel industry continues to remain a highly dynamic sector that must repeatedly face new challenges. During recent years, key factors have been the consolidation of new technologies, the marketing of new steel grades and the development of new products. Innovation, cost-reduction and environmental conservation are challenges that all of the players in the steel world - i.e. industry, research and academia - have to confront every day. Microalloying is one of the principal actors in this struggle.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
目次
Modelling Strain Induced Precipitation of Niobium Carbonitride during Multipass Deformation of Austenite
A New Model for Interpass Softening Based on the Strain Hardening Rate Prior to Unloading
A New Frontier in Microalloying: Advanced High Strength, Coated Sheet Steels
Grain Refinement in Steels through Thermomechanical Processing
Thin Slab Direct Rolling of Microalloyed Steels
High Performance Bainitic Steels
Precipitation of Microalloy Carbo-Nitrides Prior, during and after / Transformation
New Microalloyed Steel Applications for the Automotive Sector
Microalloying of Cold-Formable Multi Phase Steel Grades
Effect of High Temperature Deformation on the Hot Ductility of Nb Microalloyed Steel
Analysis of Mn Effect on Recrystallization Kinetics in High Nb Steels
Influence of Ti on Static Recrystallization in Near Net Shape Steels
Strain Induced Precipitation in Model and Conventional Microalloyed Steels during Thermomechanical Processing
Recrystallisation Driving and Pinning Forces during Hot Rolling of a Low Nb-Microalloyed Steel
Microstructural Evolution of Two Medium Carbon Microalloyed Steels during Hot Forging Process
Continuous Casting of Microalloyed Steels. Influence of Composition and Operational Parameters in Billet Surface Cracking
Mechanism of Microstructural Banding in Hot Rolled Microalloyed Steels
Evidence of Strain-Induced Precipitation on a Nb- and N-Bearing Austenitic Stainless Steel Biomaterial
Aspects of Production Hot Rolling of Nb Microalloyed High Al High Strength Steels
Modeling of the Resistance to Hot Deformation and the Effects of Microalloying in High-Al Steels under Industrial Conditions
Application of Deformation to Improve Hot Ductility in the Peritectic Steel
Problems Associated with Modeling Interpass Softening during Industrial Hot Strip Rolling
Modeling of the Microstructural Evolution and Mean Flow Stress during Thin Slab Casting/Direct Rolling of Niobium Microalloyed Steels
The Microstructure Evolution of Nb, Ti Complex Microalloyed Steel during the CSP Process
Vanadium Microalloyed Steel for Thin Slab Casting and Direct Rolling
Optimization of Rolling Conditions in Nb Microalloyed Steel Processed by Thin Slab Casting and Direct Rolling Route: Processing Maps
Processing of Niobium Microalloyed API Grade Steel on a Thin Slab Plant
Development of X60/X70 Line Pipe Steels through EAF-Thin Slab Casting Technology at Ezz Flat Steel, Ain Sukhna, Egypt
The Development of Vanadium Containing Steels Suitable for Thin Slab Casting
Effect of Nb and V in the Development of Texture and Plastic Strain Ratio in Low Carbon Microalloyed Steels Produced by A.S.T. Technology
Development of CSP (R) Processed High Strength Pipe Steels
Austenite Grain Size of Thin Slab and Its Influence on Direct Hot Strip Rolling of Nb Microalloyed Steel
Microstructural Control and DWTT Toughness in Thick-Walled Nb-Ti-V Microalloyed Linepipe Steels
Cr Influence on Steel Microstructure and Kinetics of Austenite Decomposition at Near-Bay Temperatures
Influence of Boron on Dynamic Recrystallization and Continuous Cooling Transformation of High Strength Interstitial Free Steels
Kinetics and Microstructural Aspects of the Coupling between Deformation at the Austenitic State and Ferrite Transformation in Carbon Steels
Contribution to the Understanding of Austenite Stability in a 12Cr-9Ni-4Mo Maraging Steel
Microstructure Evolution in Fine-Grained Microalloyed Steels
Factors Limiting the Achievable Ferrite Grain Refinement in Hot Worked Microalloyed Steels
Processing and Stability of Ultrafine Grained Structures in Some Microalloy Steels
Study on Ferrite Intragranular Nucleation in a V-Microalloyed Steel
In Situ X-Ray Diffraction Measurements of Deformation-Induced Austenite to Martensite Transformation in a Multiphase TRIP Steel
Characterisation and Quantification of Complex Bainitic Microstructures in High and Ultra-High Strength Linepipe Steels
Austenite Decomposition in Low Carbon Steels with Microalloy Additions
Modeling Ferrite Grain Size Distributions during the Transformation of Hot Worked Austenite
Ferrite Grain Size Refinement in Vanadium Microalloyed Structural Steels
The Kinetics of the Isothermal Bainite Formation in 1%C-1.5%Cr Steel
Multiphase Steels: Structure-Mechanical Properties Relationships in the Cold Rolled and Continuous Annealed Condition
Development of High Performance Nb-Added Hot Rolled Bainitic Steels Presenting a TRIP Effect
TRIP-Assisted Multiphase Steels with Niobium Additions. Microstructures and Properties
Effect of Niobium on the Phase Transformation Behavior of Aluminum Containing Steels for TRIP Products
Transformation Induced Plasticity (TRIP) Effect Used in Forming of Carbon CMnSi Steel
Advanced Metallic Structural Materials and a New Role for Microalloyed Steels
Precipitation Strengthening in a Low Carbon Nb-Microalloyed Steel
Effect of Heat Treatment and Microalloying on Toughness of Cast Low Carbon Steel
Mechanical Properties of Low-Temperature Bainite
Improvement of Low Carbon Steel Properties through V-N Microalloying
The Unique Features of Reinforcing Steel Microalloyed with Nitrogen and Vanadium
Application of Niobium in Quenched and Tempered High-Strength Steels
Influence of Composition and Processing Conditions on Mechanical Properties and Fish-Scale Resistance of Microalloyed Steels for Double-Face Vitreous Enamelling
Processing Low and Ultra-Low Carbon Bainitic Steels with Excellent Property Combinations
Thermomechanically Hot Rolled High and Ultra High Strength Steel Grades - Processing, Properties and Application
Development of Low Carbon Microalloyed Ultra High Strength Steels
Application of Nb-O Affinity in Clean Steel
Development of NbTiB Microalloyed HSLA Steels for High-Strength Heavy Plate
Development of Low Carbon Microalloyed Bainitic Steels for Structural Plate Applications
Influence of Severe Accumulative Rolling in a Low Carbon Microalloyed Steel
Development of Process Technology for Vanadium Containing, High-Strength, Low-Carbon, Heavy Plate and Its Trial Manufacture
Influence of Deformation and Coiling Temperature on Mechanical Properties of a High Strength Pipeline Steel
The Effect of Thermomechanical Processing on the Structure and Mechanical Properties of Ni, Nb and V-Bearing HSLA Steels
Characterisation of Bimodal Grain Structures and Their Dependence on Inhomogeneous Precipitate Distribution during Casting
Characterization of the Interaction of the Interstitial Atoms with the Substitutional Atoms and with the Dislocations in Extra-Mild Steels through Coupled Use of Thermoelectric Power and Internal Friction Measurements
Low Temperature Solubility Limit of Copper in Iron
Dual-Phase Steels Characterization Using Magnetic Barkhausen Noise Measurements
Application of Coercive Field Measurements to the Evaluation of Recovery and Recrystallization in Cold Rolled Interstitial Free (IF) Steel
Characterization of the Residual Stresses in Plastically Deformed Ferrite-Martensite Steels Using Barkhausen Noise Measurements
FE-SEM Study of Fine Nb Precipitates in Carbon Extraction Replicas
Characterisation of Niobium Carbide and Carbonitride Evolution within Ferrite: Contribution of Transmission Electron Microscopy and Advanced Associated Techniques
Characterization of Strain Induced Precipitation of Nb in Microalloyed Austenite Using Classical and Novel Techniques
Effect of Processing Parameters on Precipitation Reactions Occurring in a Ti-Bearing IF Steel
Vanadium Carbide Dissolution during Austenitisation of a Model Microalloyed FeCV Steel
Discussion on the Rate Controlling Process of Coarsening of Niobium Carbonitrides in a Niobium Microalloyed Steel
A Thermodynamic Database for Fe-Cr-Mn-Ni-Ti-S-C-N System
Computer Simulation of C-N-V Precipitates Evolution Based on Local Concentration Fluctuations
Cleavage Initiation in Ti-V-N and V-N Microalloyed Forging Steels
Effect of Pearlite Structure on the Mechanical Properties of Microalloyed Hypereutectoid Steels
Optimisation of V/N Ratios and Stelmor Cooling for Electric Arc Furnace Steels Used in Galvanised High Tensile Strength Wire Applications
Gears and Springs in Niobium Microalloyed Steels for Automotive Applications
Influence of Vanadium Microaddition on the Microstructure and Mechanical Properties of High Strength Large Diameter Wire-Rods
Grain Refinement by Rapid Transformation Annealing of Cold Rolled Low Carbon Steels
Parameters Influencing the Bake Hardenability of Microalloyed ULC Steels
Effect of Hot Band Grain Size on the Anisotropy of Warm Rolled Low Carbon Steels
Relationship between Microstructure and Texture Development during the Early Stages of Annealing in Warm Rolled Low Carbon Steels
Influence of Second Phase Particles on Recrystallisation of Cold-Rolled Low Carbon Microalloyed Steels during Isothermal Annealing
「Nielsen BookData」 より
