Aluminium alloys 2006 : research through innovation and technology : proceedings of the 10th International Conference on Aluminium Alloys, Vancouver, Canada, July 9th-13th, 2006

著者

• International Conference Aluminium Alloys
• Poole, W. J. (Warren J.)
• Wells, M. A. (Mary A.)
• Lloyd, D. J. (David J.)

書誌事項

Aluminium alloys 2006 : research through innovation and technology : proceedings of the 10th International Conference on Aluminium Alloys, Vancouver, Canada, July 9th-13th, 2006

edited by W.J. Poole, M.A. Wells and D.J. Lloyd

（Materials science forum, v. 519-521）

Trans Tech Publications, c2006

• pbk : set
• pt. 1
• pt. 2

内容説明・目次

内容説明

The world production of primary and recycled aluminum continues to increase and, over the past twenty years, has risen from ~15 Mt/y in 1985 to ~32 Mt/y in 2005. The main consumers are transportation, beverage and other packaging, and building construction. The global primary aluminum production has been growing by about 2-3% per year. However, growth rates over the last decade have been much higher. In particular, during the past five years, China has played a critical role in aluminum production and has gone through a dramatic period of growth.

目次

Three Dimensional Microstructures: Statistical Analysis of Second Phase Particles in AA7075-T651 A Japanese Perspective on the Use of Aluminium Alloys in the Automotive Sector Through Process Modelling Advanced Nanostructural Analysis of Aluminium Alloys Using Atom Probe Tomography First Principles Calculations for Alloy Design of Moderate Temperature Age-Hardenable Al Alloys Processing of Aluminium Alloys by Severe Plastic Deformation The Work Hardening of some Commercial Al Alloys The Effect of Boundary Structure on the Mechanical Properties of Aluminium Alloys The Work Hardening of Single Phase and Multi-Phase Aluminium Alloys Large Strain Deformation and Annealing of Aluminium Heterogeneity in Plastic Deformation Through-Process Texture Simulation for Aluminium Sheet Fabrication Influence of Spatial Grain Orientation Distribution on Sheet Metal Necking A Suitable Criterion for Precise Determination of Incipient Necking in Sheet Materials Evaluation of Biaxial Forming Limits by Bulge Testing Comparing the Influence of Mn and Fe Content on the Fracture of a AA6XXX Series Alloy in Different Aged States Influence of Surface Defect Geometry on the Localization and Failure of AA6111 Sheet: Necking versus Shear High Strain Rate Behaviour of Aluminium Alloy Sheet Microstructural Characterization and Fatigue Properties of 2195 Al-Li Alloy Static and Dynamic Grain Growth in Single-Phase Aluminium The Grain Structures in some 5000 Series Aluminium Alloys after Asymmetric Rolling and Annealing The Role of Copper in the Precipitation Kinetics of 6000 Series Al Alloys Confirming Computer Calculations of Phase Stability with the Experimental Observations in Automotive Alloy AA6111 Modeling the Role of Microstructure on Shear Instability with Reference to the Formability of Automotive Aluminium Alloys Nucleation-Mediated Structural Refinement and Aluminium Alloy Design Vacancy-Solute Interactions in Al-Cu-Mg Effect of Trace Addition of Sn in Al-Cu Alloy Low Temperature Thermal Stability of Quaternary Al-Li-Cu-Mg Alloys Improvement of Bake-Hardening Response of Al-Mg-Cu Alloys by Means of Nanocluster Assist Processing (NCAP) Technique HRTEM Study of Precipitates in Al-Mg-Si and Al-Mg-Ge Alloys The Effect of Composition and Temperature on the Ageing Response of some Dilute 6xxx Series Alloys Precipitation Behaviour of Mg and Si at RT in Pre-Aged Al-Mg-Si Alloys The Effect of Intermediate Storage Temperature and Time on the Age Hardening Response of Al-Mg-Si Alloys 3DAP Characterization and Thermal Stability of Nano-Scale Clusters in Al-Mg-Si Alloys Precipitation Hardening in Al-Cu-Mg Alloys: Analysis of Precipitates, Modelling of Kinetics, Strength Predictions Crystal Analysis of Nonequilibrium non-Phase in Al-Li-Mg Alloys Nature of Formation of the Areas Having an Ultrafine Grain Structure in Al-Li-Mg System Alloys Through Process Modelling of Microchemistry in AA3103 A Multi-Mechanistic Model for Precipitation Strengthening in Al-Cu-Mg Alloys during Non-Isothermal Heat Treatments Secondary Precipitation in Aluminium Alloys & Its Role in Modern Heat Treatment Cluster Dynamics Modelling of the Precipitation Kinetics in Al(ZrSc) Alloys Modelling the Phase Transformation from Al6(Mn,Fe) to -Al(Mn,Fe)Si Phase during Homogenization of AA3xxx Alloys Characterisation of AlFeSi Intermetallics in 6000 Series Aluminium Alloy Extrusions Vacancy-Solute Aggregates in Al-Zn-Mg-(Cu, Ag) Key Microstructural Features Responsible for Improved Stress Corrosion Cracking Resistance and Weldability in 7xxx Series Al Alloys Containing Micro / Trace Alloying Additions Development of a New 7xxx Ageing Model Grain Boundary Precipitate Modification for Improved Intergranular Corrosion Resistance Microstructural Interactions during Stress Ageing a 7475 Aerospace Alloy Influence of Zinc to Magnesium Ratio and Total Solute Content on the Strength and Toughness of 7xxx Series Alloys Microstructural Evolution of a New Aerospace 7XXX Alloy during Retrogression and Re-Ageing Treatment Blister Free Heat Treatment of High Pressure Die-Casting Alloys Characterisation of Intermetallic Phases in Multicomponent Al-Si Casting Alloys for Engineering Applications The Influence of Alloy Composition on Phase Transformations and Recrystallization in Twin-Roll Cast Al-Mn-Fe Alloys Anisotropy Decrease in Sheets of 1424 Al-Mg-Li Alloy The Development of New Al-Mg-Si Alloys for Thixoforming Age Hardening of Forged Aluminium Components - Mechanical Properties and Distortion Behaviour after Gas Quenching Thermal Stability of Rapidly Solidified Alloys of Aluminium with Transition Metals Microstructure and Phase Composition of Al-Ce-Cu Alloys in the Al-Rich Corner The Effect of Heat Treatment and Mn, Cu and Cr Additions on the Structure of Ingots of Al-Mg-Si-Fe Alloys Through Thickness Microstructural Gradients in 7475 and 2022 Creep - Ageformed Bend Coupons Effect of Al3Ni and Mg2Si Eutectic Phases on Casting Properties and Hardening of an Al-7% Zn-3% Mg Alloy Mechanical Properties of Dispersion-Hardened P/M Al-Mn-Cu-Mg-Zn Alloys at Elevated Temperature Effects of a Small Addition of Cu or Ge on the Microstructure and Mechanical Property of an Al-Si Alloy Quantitative Correlation between Strength, Ductility and Precipitate Microstructures with PFZ in Al-Zn-Mg(-Ag, Cu) Alloys 3DAP Analysis and Computer Simulation of Nanocluster Formation in the Initial Aging Stage of Al-Zn Alloys Modelling Dispersoid Precipitation during Recrystallisation in AA3103 The Effect of Grain Refiners for Aluminium Alloy Containing Mn-Ti-Sr Dispersoid Understanding the Compromise between Strength and Exfoliation Corrosion in High Strength 7000 Alloys The Effect of Alloy Addition on the High Temperature Properties of Over-Aged Al-Si(CuNiMg) Cast Alloys Grain Boundary Segregation and Precipitation in Aluminium Alloy AA6061 Coherency Loss of Al3Sc Precipitates during Ageing of Dilute Al-Sc Alloys Influence of Cd and In on the Formation Kinetics of the ' Metastable Phase in Al-Li-In(Cd) Alloys Properties of Rolled and Extruded Semiproducts Made of New Al-Cu-Mg-Ag Heat-Resistant B-1213 Alloy Study of the Nanostructures Formed in 2024 Alloy during Thermomechanical Treatments Interaction between Cu and Sn in the Early Stages of Ageing of Al-1.7at.%Cu-0.01at.%Sn Precipitation Behaviour of Zirconium Compounds in Zr-Bearing Al-Mg-Si Alloy Age-Hardening Behaviour and HRTEM Observation of Precipitates in Excess Mg Type Al-Mg-Si-Ag Alloy The Effect of Ag-Addition on Crystal Structure of '-Phase in Al-Mg-Si Alloy Effect of Small Additions of Fe on the Tensile Properties and Electrical Conductivity of Aluminium Wires Heat Treatment Effect on Properties of Al-Mg-Si-Cu 1370 Alloy Recrystallisation Resistance of Extruded and Cold Rolled Aluminium Alloys with Additions of Hf, Sc and Zr An Investigation of the Solubility of Scandium in Iron-Bearing Constituent Particles in Aluminium Alloys Effect of Minor Sb Additions on SDAS, Age Hardening and Mechanical Properties of A356 Aluminium Alloy Casting The Effect of Pre-Ageing and Addition of Copper on the Precipitation Behaviour in Al-Mg-Si Alloys Microstructural Evolution during Ingot Preheat in 7xxx Aluminium Alloys for Thick Semiproduct Applications Evolution of Nanostructure during the Early Stages of Ageing in Al-Zn-Mg-Cu Alloys Identification of Quasicrystalline Particles in an Isothermally Aged Al-10Mg-0.5Ag Alloy Structure and Mechanical Behaviour of Al-Sc Alloys Improvement of Structure and Deformation Behaviour of High Strength Al-Zn-Mg Foam The Influence of Silicon on Age Hardening Kinetics and Phase Precipitation in Al-Mg-Zn Alloys Factors Influencing the Heterogeneous Nucleation of ' in Al-Cu-In Alloy Monitoring the Evolution of the Matrix Copper Composition in Age Hardenable Al-Cu Alloys The Effect of Alloying Additions on Vacancy Behaviour in Aluminium-Copper Alloys Damage Tolerance Capability of an Al-Cu-Mg-Ag Alloy (2139) Influence of an Inclined Cooling Plate on the Production of A356/CNF and A356/SiC MMC by Compocasting The Role of Alloying Elements on the Surface Treatment and Finishing of Aluminium Surface Science Studies of the Effect of Al Alloy Microstructure on the Formation of Chromate Coatings Filiform Corrosion on 6000 Series Aluminium: Kinetics and Inhibition Strategies Influence of Composition and Roughness on Localized Corrosion of Al-Mg-Si Alloys Characterized by Microelectrochemistry Intergranular Corrosion and Stress Corrosion Cracking of Sensitised AA5182 Corrosion of Painted Aluminium Sheet Fracture Mechanical Testing of Adhesion of Organic Coatings on Aluminium Protection of Aluminium Alloys via Hybrid Sol-Gel Coatings with Encapsulated Organic Corrosion Inhibitors Significance of Low Copper Content on Grain Boundary Nanostructure and Intergranular Corrosion of AlMgSi(Cu) Model Alloys Surface Segregation of Indium by Heat Treatment of Aluminium Scanning Kelvin Probe Studies of Cosmetic (Filiform) Corrosion on AA6016 Consequences of Hot Rolling of Recycled AA5050 on Filiform Corrosion Exfoliation Corrosion Mechanism: Interplay between Intergranular Corrosion and Stress Corrosion Cracking during Exfoliation Corrosion of AA7449 Corrosion and Protection of Friction Stir Welds Influence of Microstructure on Electrochemical Properties of Severely Deformed Al-5 wt% Cu Alloy by ECAP Roughening of Coated Aluminium Sheets during Plastic Straining Properties of Oxide Formed on Aluminium in Aqueous Acetate Buffer A Novel Anti-Corrosion Coating for Aluminium Alloy Surface Treatment for Corrosion Resistant Aluminium Alloys by Removing Intermetallic Phases Investigation on Microstructure and Corrosion Behaviour of 6XXX Series Aluminium Alloys Pitting Corrosion Behaviour of the 6056-T78 Aluminium Alloy Initial Pitting Behaviour of LY12 Aluminium Alloy in Simulated Marine Atmosphere Surface Science Studies of the Effect of Mn2+ on Zinc Phosphating of 2024-T3 Al Alloy Influence of Zincate Treatment on Adhesion Strength of Electroless Nickel-Phosphorus Plated Film for Commercial Pure Aluminium Surface Modification of Aluminium Alloys Effect of Copper Content on the Bendability of Al-Mg-Si Alloy Sheet Characterization of Ageing Products in AA6111 Using Dynamic Dislocation-Defect Analysis The Large Strain Flow Stress Behaviour of Aluminium Alloys as Measured by Channel-Die Compression (20-500 DegreesC) Temperature-Dependent Shear Strain Localization of Aluminium-Lithium Alloy in Uniaxial Compression Using Zerilli-Armstrong and Gradient Plasticity Models Overview of Forming and Formability Issues for High Volume Aluminium Car Body Panels Mapping the Crystal Orientation Distribution Function to Discrete Orientations in Crystal Plasticity Finite Element Forming Simulations of Bulk Materials Study of Microstructure and Texture Evolution Using In-Situ EBSD Investigations and SE Imaging in SEM Damage-Based Finite Element Modeling of Stretch Flange Forming of Aluminium-Magnesium Alloy Damage Investigation in Aluminium Alloys by X Ray Tomography Modelling of Ductile Fracture in the Presence of Two Populations of Voids - Applications to Aluminium Alloys Precipitation and Mechanical Properties of Supersaturated Al-Zn-Mg Alloys Processed by Severe Plastic Deformation Influence of Temperature and Strain Rate on the Plastic Deformation of Two Commercial High Strength Al Alloys Effect of Deformation Route and Sc and Zr Addition on Ultra-Fine Grain Formation and Superplasticity in Al-Mg Alloys Correlation of Strength with Hardness and Electrical Conductivity for Aluminium Alloy 7010 Influence of Iron Content on the Mechanical Properties of AA6016 Alloy Sheet Nonuniform Temperature Distribution in Adiabatic Shear Band Using Measured Shear Stress-Shear Strain Curve in Torsion of Thin-Walled Tube Aluminium Alloy Specimen and Gradient-Dependent Plasticity Influence of Scandium Addition on the High Temperature Compressive Strength of Aluminium Alloy 7010 An Analysis of Microband Orientation in Hot Deformed Aluminium Alloy AA5052 Using Forward and Reverse Torsion Temperature and Strain Rate Effects on the Dynamic Strain Ageing of Aluminium Alloy AA7030 Experimental and Numerical Study in Denting Resistance of 6111-T4 Aluminium Alloy Effect of Microstructure on Crack of Al-Mg-Si Alloy Extrusions during Axial Compression Effect of Artificial Aging Temper on the Microstructure and Properties of 7B04 Pre-Stretched Thick Plate Boss Formability of Nano-Structured Aluminium Alloys at Elevated Temperatures The Bauschinger Effect in AA 6111 Numerical Analysis on the Extruded Volume and Length Ratios of Backward Tube to Forward Rod in Combined Extrusion Processes An Analysis on the Forming Characteristics of AA 6063 Aluminium Alloy in Radial-Forward Extrusion Process An Analysis on the Surface Expansion of Aluminium Alloys in Backward Can Extrusion Process The Influence of Die Geometry on the Radial Extrusion Processes with AA 6063 Aluminium Alloy An Analysis on the Force Requirement of Combined Operations for Forward and Backward Tube Forming An Analysis on the Forming Load of AA 2024 Aluminium Alloy in Combined and Sequence Operation Process The Forming Characteristics of AA 2024 Aluminium Alloy in Radial Extrusion Process Combined with Backward Extrusion Work Hardening Behaviour of an Al-2.8Mg-0.16Sc Alloy Experimental Study of the Stretch Flange Formability of Al-Mg Sheet The Die Forgings of High Corrosion Resistance, Wieldable, Super Light 1420 Aluminium Alloy A Comparison of Flow Stress and Microstructure Development of Al Alloys in Plane Strain Compression and Multiple Forging Investigation on Mechanism of Ductile Fracture of AA5754 Sheet Precipitation Strengthening in AA7449 Aluminium Alloy: Understanding the Relationship between Microstructure, Yield Strength and Strain Hardening Characterisation and Modelling of the Three Dimensional Propagation of Short Fatigue Cracks Assessment of Damage and Fracture Behaviours in a Cast Aluminium Alloy via In Situ Synchrotron Microtomography Application of the Three-Dimensional Damage Percolation Model and X-Ray Tomography for Damage Evolution Prediction in Aluminium Alloys Toughness after Interrupted Quench Experimental Analysis of Toughness in 6156 Al-Alloy Sheet for Aerospace Applications On the Origin of the Enhanced Creep Resistance in Underaged Al-Cu Based Alloys Creep of Al-Sc Microalloys with Rare-Earth Element Additions Prediction of Long Term Stress Rupture Data for 2124 Influence of Strain Rate on Shear Localization during Deformation and Fracture of 5754 and 5182 Aluminium Alloy Hydrogen Accumulation during Fatigue Deformation of Al-Mg-Si Base Alloys High-Temperature Fatigue of Deep Rolled Aluminium Alloy AA6110-T6 Effect of Periodic Overloads on Fatigue Crack Propagation in Aluminium Alloys Microstructural Factors Affecting Fatigue Initiation in Various Al Based Bearing Alloys Fatigue Behaviour in Fine Grained Aluminium Alloys Microstructural Analysis of Fatigue Initiation in Al-Si Casting Alloys Role of Residual Stresses on Fatigue Crack Propagation of FSW 6056-T78 Aluminium Joints under Various Technologies Combined Simulation and Experiment for Friction Stir Welding Process Development Modelling Precipitate Evolution during Friction Stir Welding of Aerospace Aluminium Alloys The Influence of Processing Parameters on Microstructure of Al 5754 Friction Stir Spot Welds Investigation on Strength and Corrosion Behaviour of Friction Stir Welded Similar and Dissimilar Aluminium Alloys Interfacial Microstructure of A6111/Steel Lap Joint Fabricated by Defocused Laser Beam Welding Novel Technique for Joining of Thick Section Difficult-to-Weld Aluminium Alloys Mechanical and Corrosion Behaviour of the 2139 Aluminium-Copper Alloy Welded by the Friction Stir Welding Using the Bobbin Tool Technique Laser and Hybrid Laser-MIG Welding of 6.35 and 12.7mm Thick Aluminium Aerospace Alloy Interfacial Microstructure of Magnetic Pressure Seam Welded Al-Fe, Al-Ni and Al-Cu Lap Joints Liquid Film Migration in Aluminium Brazing Sheet? Interface Reactions of Al and Binary Al-Alloys on Mild Steel Substrates in Controlled Atmosphere Effect of Welding Parameters on Mechanical and Microstructural Properties of Dissimilar AA6082-AA2024 Joints Produced by Friction Stir Welding Epitaxial Grain Growth during Surface Modification of Friction Stir Welded Aerospace Alloys by a Pulsed Laser System Creep and Creep Rupture of FSW Joints of 5052 Aluminium Alloy Plates Microstructural Evolution in AA7449 Plate Subject to Friction Stir Welding and Post Weld Heat Treatment Investigation of Global Buckling Distortion in Welding of a Thin Wall Aluminium T Joint Development of Aluminium Foam Processes and Products Aluminium in Future Cars - A Challenge for Materials Science AluMATTER, a New Interactive e-Learning Tool Synthesis of Aluminium Based Bulk Materials from Micro and Nano Particles Using Back Pressure Equal Channel Angular Consolidation Optimisation of the Strength of Aluminium Foam Sandwich (AFS) Panels by Different Heat Treatments Accumulative Roll Bonding of AA8006, AA8011 and AA5754 Sheets Advanced Aluminium and Hybrid Aerostructures for Future Aircraft Designing Aluminium Alloys for a Recycling Friendly World New Light-Weight Aluminium Alloys with High Mg2Si-Content by Spray Forming Microstructure and Mechanical Properties of Fe-Containing Al-Alloys Processed by a Rheo-Diecasting Process Role of Bi and Ca Additions in Controlling the Microstructure of Sr-Modified 319 Alloys Hydrogen Permeation Behaviour in Aluminium Alloys Recently-Developed Aluminium Solutions for Aerospace Applications Microstructures of Alumina-Aluminium/Magnesium Interpenetrating Composites Superplasticity in Coarse-Grained Al-Mg Alloys Metallurgical Mechanisms Controlling Mechanical Properties of Aluminium Alloy 2219 Produced by Electron Beam Freeform Fabrication Evolution and Control of 2219 Aluminium Microstructural Features through Electron Beam Freeform Fabrication Structure and Properties of Mechanically Alloyed Composite Materials from Scrap of Al Alloys Development of Oxide Film in Aluminium Melt Thermally Sprayed Quaternary Al-Sn Based Alloys for Applications in Automotive Journal Bearings Evaluation of AA 2050-T87 Al-Li Alloy Crack Turning Behaviour Microstructural Characterization of the Crystallization Sequence of a Severe Plastically Deformed Al-Ce-Ni-Co Amorphous Alloy Self-Blowing Process of Al Foam Assisted by Exothermic Reaction In-Situ SEM Observations of Moving Interfaces during Recrystallisation Use of Small-Angle X-Ray Scattering for the Characterisation of Precipitates in Aluminium Alloys Early Stage Hardening in AlCuMg Alloy Studied by 63Cu Nuclear Magnetic Resonance and Positron Annihilation Observation of Precipitates in Aluminium Alloys by Sub-Micrometer Resolution Tomography Using Fresnel Zone Plate Non Destructive Three Dimensional Imaging of Aluminium Alloys Laser-Ultrasonic Characterization of the Microstructure of Aluminium Neutron Diffraction Techniques for Alloy Characterization and Development Guinier-Preston and Guinier-Preston-Bagaryatsky Zone Reversion in Al-Cu-Mg Alloys Studied by NMR Electrical Resistivity Measurements: A Sensitive Tool for Studying Aluminium Alloys Activation Energy (Migration Defects) in 7075 Aircraft Alloys by Positron Annihilation Lifetime Technique (PALT) Physical Simulation of Longitudinal Weld Seam Formation in Aluminium Extrusions Field Assisted Sintering Consolidation of Al-Si-Fe-X Alloy Powder/Flakes Produced through Air Atomization/Melt Spinning Analysis of Hardness Maps on Aluminium Alloy Processed by ECAP The Influence of Grain Structure and Texture on Formability and Toughness of Extruded Aluminium Alloys Modeling Dissolution in Aluminium Alloys Using a Sharp-Interface Front-Tracking Method Modelling Heterogeneous Precipitation in 7xxx Aluminium Alloys during Complex Processing Microstructure Refinement of Al-Si Alloy Using Compressive Torsion Processing The Important Role of Dissolved Elements (Mn, Fe) in the Process of Rolled Products and Their Effects on Final Properties Modelling Microstructure and Properties: The Contributions of Grain Size, DAS and Bifilms Understanding T-Ingot Horizontal DC Casting Using Process Modelling Continuous Cooling Transformation (CCT) Diagram of Aluminium Alloy Al-4.5Zn-1Mg Application of a Mathematical Model to Simulate Multi-Pass Hot Rolling of Aluminium Alloy AA5083 Effect of Hot-Extrusion Conditions on Mechanical Properties and Microstructure of P/M Al-Zn-Mg-Cu Alloys Containing Zr Aging Behaviour of Aluminium Alloys after Severe Plastic Deformation Historical Evolution of Thermomechanical Processes Applied to Aluminium Alloys Improved Multiple Ageing Treatments for AA6111 Formability and Bake-Hardenability of Al-Mg-Cu Alloy Sheets by Asymmetric Warm Rolling Industrial Application of Through-Process Modelling II: Microstructural Models and Descriptors Required for Thermo-Mechanical Processing Modeling Structure of Al-Sn Alloy A Heat Transfer Model for the Production of Semi-Solid Billets with the SEED Process Analyzing the Cold Rolling of Aluminium Using a New Software (Matroll) Impact and Fatigue Crack Growth Behaviour of a Yield Strength Graded Al-Zn-Mg Alloy Control of Earing in Deep Drawing of Roll-Cast AA3003 Aluminium Sheets Effect of Rolling Friction on the Development of {111} Texture in A1050 Aluminium Sheets Excess Free Volume of High Angle Grain Boundaries in Aluminium Modelling of Microstructure and Texture and the Resulting Properties during the Thermo-Mechanical Processing of Aluminium Sheets Recrystallization of AA1050 Studied by 3DXRD In Situ SEM-EBSP Observations of Recrystallization Texture Formation in Al-3mass%Mg Alloy Effect of Thermomechanical Processing on Texture and Mechanical Properties of Al-Cu-Li Alloy Plate Softening of an AA3103 Alloy Analysed Using Gallium Enhanced Microscopy Boundary Mobilities in Binary Al-Mn Alloys Influence of Concurrent Precipitation on the Nucleation Kinetics during Recrystallisation in AA3003 Deformation and Recrystallization Behaviour of a Homogenised and a Heterogenised Al-Mg-Si Alloy Changes in Grain Size Distribution of a Submicron Grained Al-Sc Alloy during High Temperature Annealing Effect of Mn Intermetallic Particle on Microstructure Development of P/M Al-Zn-Mg-Cu-Mn Alloy An Investigation of Novel Spraycast Al-Mg-Li-Zr-(Sc) Alloys Recrystallization Behaviour in Twin-Roll Continuous Cast Al-Fe-Ni Alloy A Comparative Study on the Softening Behaviour of Cold Rolled Ingot and Continuous Cast AA5754 Precipitation and Recrystallization in an Al-Mg-Sc Alloy Recovery of Tensile Properties of AA5182 after Cold Rolling Geometric Misorientation Changes in Aluminium Subjected to Strain Path Change Test Towards a Micro-Macro Model of Hot Tearing The Effect of Grain Refinement and Cooling Rate on the Hot Tearing of Wrought Aluminium Alloys Thermal Contraction during Solidification of Aluminium Alloys Effect of Advanced Cooling Front (ACF) Phenomena on Film Boiling and Transition Boiling Regimes in the Secondary Cooling Zone during the Direct-Chill Casting of Aluminium Alloys Improved VDC Casting of Aluminium Alloys through an Understanding of the Surface Properties of the Molten Metal Modeling of Porosity Formation in Aluminium Alloys 3D Microstructure Reconstruction of Aluminium Alloys Quenched during Solidification Influence of Cooling Rate on Morphology and Distribution of Fe-Containing Intermetallic Compounds in Strip Cast AA1100 Type Alloys Characterization of Fe-Rich Intermetallic Phases in a 6xxx Series Al Alloy Effects of Alloy Chemistry and Solidification Rate on the Mechanical Properties of an Al-9Si-1Cu Alloy for Powertrain Applications Tear Toughness Evaluation of High-Quality Squeeze-Cast and Rheocast Aluminium Alloy Castings The Effect of Casting Variables on the Structure of Hypereutectic Al-Si Alloys Solidification Behaviour of 357 Al-Alloy under Intensive Forced Convection A Combined Numerical and Experimental Study of the Effects of Controlled Fluid Flow on Alloy Solidification Effects of High Frequency Electromagnetic Field on Improving Macro/Micro Structure and Reducing Segregation for Aluminium Alloy Billets The Impact of Partial Drainage on Chemical Composition of 356 Al-Si Alloy CDS Method for Casting Aluminium-Based Wrought Alloy Compositions: Theoretical Framework A Validated Through Process Model to Predict the Fatigue Life of a Cast A356 Automotive Wheel Industrial Application of Through-Process Modelling I: Microstructural Descriptors Required from the Casting Model for Downstream Process Stages Effects of Solidification Range on the Structure of Aluminium Alloys Obtained under Conditions of Constant Melt Flow The Influence of Fluid Flow on Intermetallic Phases in Al-Cast Alloys Light Alloy Castings for Automotive Applications: The Case of Al vs. Mg Direct Chill Casting of CLAD Ingot The Effect of Aging Processes on the Structure and Properties of Rapidly Solidified Al-Sc, Al-Zr and Al-Hf Alloys Solidification Structure and Casting Defect in a High-Speed Twin-Roll Cast A6022 Aluminium Alloy with Various Fe Contents Feeding Blockage of Aluminium Horizontal Continuous Casting Semi-Solid Slurry Preparation without Additional Stirring, Cup-Cast Method Role of Grain Refining in Macrosegregation upon Direct Chill Casting of AA 2024 Round Billet Rheo-Extrusion of A7075 Aluminium Alloy Utilizing Semi-Solid Slurry Manufactured by Simple Method Structure Stabilization Al-(10-14)%Mg Alloys during the Long-Term Natural Ageing Grain Refinement Performance of Aluminium Cast-Alloy by Deformed Al-Al3Ti Alloy Refiner Effect of Solution Treatment and Artificial Aging on the Work Hardening Characteristics of D357 Alloy Castings Observations of Intermetallic Compound Formation of Hot Dip Aluminized Steel Mechanical Behaviour in the Mushy State during Isothermal Tensile Testing Effect of an Addition of Silver on the Age Hardening and the Formation of a Soft Surface Layer in an Al-12mass%Zn Alloy Influences of Iron Content and Solidification Rate on Mechanical Properties of 6022 Base Aluminium Alloys Effect of Heat Treatment Condition and Alloy Composition on Hydrogen Content in Al-Mg Alloys Work Hardening Behaviour of Heat-Treatable Al-Mg-Si-Alloys Research of Super Lattice Structure Parameters in Alloys of Al-Li-Mg System Delineating the Role of Second Phase Particles in AA6111 Production of AA6082 Feedstock for Forming in the Semi-Solid State Hot Deformation Behaviour and Microstructure in Al-Cu-Li Alloy Containing Small Amount of Ag and Mg Trace Element Effects on Microstructure and Mechanical Properties in Al-Cu-Li Alloy after Thermal Exposure

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA80923679
• ISBN:
  • 0878494081
• LCCN: 2006286122
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Uetikon-Zuerich ; Enfield, NH
• ページ数/冊数: 2 v.
• 大きさ: 25 cm
• 分類:
  • LCC : TA480.A6
  • DC22 : 620.186
• 件名:
  • LCSH : Aluminum alloys -- Congresses
• 親書誌ID:
  • BA00294222