Progress in powder metallurgy : proceedings of the 2006 Powder Metallurgy World Congress & Exhibition (PM 2006), held in Busan Exhibition & Convention Center (BEXCO), Busan, Korea, September 24-28, 2006
Author(s)
Bibliographic Information
Progress in powder metallurgy : proceedings of the 2006 Powder Metallurgy World Congress & Exhibition (PM 2006), held in Busan Exhibition & Convention Center (BEXCO), Busan, Korea, September 24-28, 2006
（Materials science forum, v. 534-536）
Trans Tech Publications Ltd, c2007
- set
- pt. 1
- pt. 2
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and index
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The large number, and high quality, of the papers making up this collection reflect the continuing vigor of the powder-metallurgy industry and associated research all over the world. The emergence of such new fields as nano-materials, cellular materials and process modeling by computer simulation is very evident, while traditional fields such as compaction and sintering are also being tackled anew using more sophisticated concepts and tools. Globalization of the economic structure presents challenging opportunities for powder metallurgy, and there is an increasing demand for high-productivity, low-cost, highquality, new products, together with reduced pollution.
Table of Contents
A New General Equation of Mean Particle Size for Different Atomization Processes
Acid-Insoluble Substances in Reduced Iron Powder from Ores
Aerosol Synthesis and Growth Mechanism of Magnetic Iron Nanoparticles
Atomization Using a Pressure-Gas-Atomizer
Characteristics of (Fe, M)S2 (M=Co, Ni, Mo) Composite Powders Fabricated by MCP
Characteristics of Porous YAG Powders Fabricated by PVA Polymer Solution Technique
Characterization of GaP Nanowires Synthesized by Chemical Vapor Deposition
Consideration of Fe Nanoparticles and Nanowires Synthesized by Chemical Vapor Condensation Process
Development of High Performance Stainless Steel Powders
Dry Coated Particle for Plasma Spraying
Effect of FeNi30 Powder Catalyst by Water Atomizing on Synthesis High-Grade Diamond
Fabrication of Nano-Sized Titanate Powders by an Ethylene Glycol Solution Route
Fabrication of Porous Structure of BCP Sintered Bodies Using Microwave Assisted Synthesized HAp Nano Powder
Formation of Rod-Like Al2TiO5 Via Mechanical Activation Followed by Thermal Processing
High Efficient Metal Powder Production by Gas Atomisation Process
High Oxygen Sensitivity of Nanocrystalline Ceria Prepared by Thermochemical Process
HRTEM Study of Phase Transformation from Anatase to Rutile in Nanocrystalline TiO2 Particles
Hybrid Atomization Method for Manufacturing Fine Spherical Metal Powder
Hydrogen Storage Properties of Nb-Zr-Fe Alloys Disintegrated by Hydrogen Gas
Hydrothermal Synthesis of Rod-Like Copper Oxide Crystals
In-Situ TEM Observation on Phase Formation of TiO2 Nanoparticle Synthesized by Flame Method
Large Scale Production of Nanoparticles by Laser Pyrolysis
Microstructure and Properties of Plasma Spray Coatings Prepared from Ti-Zr-Ni Quasicrystalline Powders
Milling and Sintering Behavior of the Metal-Ceramic Mixed Powders
Organic-Inorganic Nano Composite Membranes of Sulfonated Poly(ether Sulfone-Ketone) Copolymer and SiO2 for Fuel Cell Application
Particle Size and Shape Analysis the Key to Success in Metal Powder Production
Preparation and Characterization of Ag/TiO2-xNx Nanoparticles
Preparation and Characterization of Monodispersed and Nano-Sized Cu Powders
Preparation and Characterization of Monosized Germanium Micro Particles by Pulsated Orifice Ejection Method
Preparation and Characterization of Stable Dispersions of Ni Nanoparticles
Synthesis and Characterization of Branched Sulfonated Poly(ether Sulfone-Ketone) Copolymer and Organic-Inorganic Nano Composite Membranes
Synthesis and Properties of Multimetal Oxide Nanopowders via Nano-Explosive Technique
Synthesis of Aluminum Monohydroxide Nanofiber by Electrolysis of Aluminum Plates
Synthesis of Cu-Coated Ni-Based Amorphous Composite Powders by Gas Atomization and Spray Drying Process
Synthesis of Nano Metal Powder by Electrochemical Reduction of Iron Oxides
Synthesis of Ultra Fine TiC Powders by Carbothermal Reduction
The Atmosphere Effect on Synthesis of TiB2 Particles by Carbothermal Reduction
The Development of Mono-Sized Micro Silicon Particles for Spherical Solar Cells by Pulsated Orifice Ejection Method
The Optimization of Hydrogen Reduction Process for Mass Production of Fe-8wt%Ni Nanoalloy Powder
The Synthesis of Maghemite and Hematite ( -Fe2O3, -Fe2O3) Nanospheres
Thermoelectric Properties of n-Type 90% Bi2Te3+10%Bi2Se3 Thermoelectric Materials Produced by Melt Spinning Method and Sintering
Vacuum Carburization of Nanometer Tungsten Powder with Carbon Black
Characteristics of Nanostructured WO3-CuO Powder Mixture Produced by Ball Milling
Effect of Ag on the Thermoelectric Properties of Ag2Se Alloy Prepared by Mechanical Alloying Process
Effect of Fe Doping on Thermoelectric Properties of Mechanically Alloyed CoSb3
Fabrication of Aluminum/Aluminum Nitride Composites by Reactive Mechanical Alloying
Fabrication of TiH2 Powders from Titanium Tuning Chip by Mechanical Milling
Formation of Fe3AlC Base Alloy by Mechanical Alloying and Vacuum Hot Pressing
High Energy Ball Milling of Catalytically Synthesized Carbon Nanotubes
Mechanical Milling of Lithium with Metal Oxide and its Reactivity with Gases
Mechanochemical Synthesis of Zinc Ferrite, ZnFe2O4
Mg-Y-Cu Bulk Metallic Glass Obtained by Mechanical Alloying and Powder Consolidation
Nanocrystalline and Ultrafine Grained Materials by Mechanical Alloying
Precipitation Behavior of " in Severely Plastic Deformed Ni-Base Alloys
Sintering Behavior of TiC-Fe Based Composite Fabricated by Spark Plasma Sintering Using TiH2 Graphite Powders
Solid-State Synthesis of Mg2X (X=Si, Ge, Sn and Pb) via Bulk Mechanical Alloying
Synthesis of Titanium Carbide by Heat Treatment of TiH2 and Carbon Black Powders
The Magnetic and Photo-Catalytic Properties of Fe Doped TiO2 Nanocrystalline Powder Synthesized by Mechanical Alloying
Thermal Stability of Amorphous Ti- Cu- Ni- Sn Prepared by Mechanical Alloying
Analysis of Failure Mechanisms during Powder Compaction
Anisotropy of Thermal Expansion Coefficient of Pressed Graphite Foam Measured over the Temperature Interval 20-500 DegreesC
Carbon Nanotube Reinforced Metal Matrix Nanocomposites via Equal Channel Angular Pressing
Compaction of Ultra-Fine WC Powder by High-Speed Centrifugal Compaction Process
Densification and Conolidation of Powders by Equal Channel Angular Pressing
Densification Behavior of Iron Powder during Cold Stepped Compaction
Densification Mechanism of Warm Compaction for Iron-Based Powder Materials
Development of High Strength Sintered Steel by High Pressure Warm Compaction Using Die Wall Lubrication
Development of Optical Device Housing Compacted Using SUS304L Granulated Powders
Effect of Polymer Compatibility on the Binder Migration during Spray Drying and Compaction Behavior
Fabrication of Continuously Porous t-ZrO2 Bodies Using Carbon Powder and Evaluate Their Biocompatibility
Fabrication of Rod type Cu54Ni6Zr22Ti18 Bulk Amorphous Alloy by Warm Extrusion Process
Flow Patterns in Green Bodies Made by High-Speed Centrifugal Compaction Process
Green Body Behaviour of High Velocity Pressed Metal Powder
High Velocity Compaction : Overview of Materials, Applications and Potential
Investigation of Mechanical Properties of Powder Metallurgy Parts with Control of Microstructure
Numerical Simulation of Cold Compaction of 3D Granular Packings
Plastic Behaviour of Green Powder Metallurgical Compacts
Reduced Weight Scatter with Bonded Powder Mixes
Segregation-Free Premixes for Increased Productivity and Improved Performance
Surface Densification Coupled with Higher Density Processes Targeting High-Performance Gearing
The Application of P/M Advanced Techniques to Sintered Gears
The Elastic Behaviour of Metal Powder Compacts
Warm Compaction: FEM Analysis of Stress and Deformation States of Compacting Dies with Rectangular Profile of Various Aspect Ratio
Warm Compression of Al Alloy PM Blends
A Study of Ceramic Injection Molding of Watch Case Composed of ZrO2 Powder
Computer Aided Engineering Design of Powder Injection Molding Process for a Dental Scaler Tip Mold Design
Development of Dental Scaler Tip Mold with Powder Injection Molding Process
Effect of Particle Size in Feedstock Properties in Micro Powder Injection Molding
Effect of Residual Carbon on the Microstructure Evolution during the Sintering of M2 HSS Parts Shaping by Metal Injection Moulding Process
Fabrication of Ti-6Al-7Nb Alloys by Metal Injection Molding
Gas Nitriding Mechanism in Titanium Powder Injection Molded Products
Influence of the Morphology and Particle Size on the Processing of Bronze 90/10 Powders by Metal Injection Moulding (MIM)
Innovations in Micro Metal Injection Molding Process by Lost Form Technology
Metal and Ceramic Micro Components Made by Powder Injection Molding
Metal Injection Molding Process of Mo2FeB2 Boride Base Cermets
Micro Metal Injection Molding Using Hybrid Micro/Nano Powders
Optimization of Composite MIM Feedstock Rheological Behaviour by Experimental Analysis
Effect of Cu and Mg on Forging Property and Mechanical Behavior of Powder Forged Al-Si-Fe Based Alloy
Fabrication of Micro Spur Gear in Nano Grained Al Alloy
Numerical Simulation and Forecasting of Mechanical Properties for Multi-Component Nonferrous Dispersion-Hardened Powder Materials
Alumina-Titania Spot Spraying Bead Formation and Characteristics in Atmospheric Plasma Spraying
An Empirical Method to Evaluate the In-Flight Particle Behaviors within a Cross Section of Mass Flux during Atmospheric Plasma Spraying
Correlations between In-Flight Particles, Splats and Coating Microstructures of Ni20Cr Thermally Sprayed by Flame and Arc Spray Processes
Effect of Gun Nozzle Geometry, Increase in the Entrance Convergent Section Length and Powder Injection Position on Cold Sprayed Titanium Coatings
Experimental Investigation and Modeling of the Specific Enthalpy Distribution in a Spray Cone
Fabrication of Ti(Al,O)-Al2O3 Powder Feedstock for Thermal Spraying and Evaluation of Composite Coating
Microstructure and Bonding Strength of Tungsten Coating Deposited on Copper by Plasma Spraying
Porosity in Spray-Formed Materials
Present Status and Future Prospects of Cold Spraying
Spray Forming of Mg2Si Rich Aluminum Alloys
Study on Metal/Diamond Binary Composite Coatings by Cold Spray
The Effect of In-Flight Bulk Metallic Glass Particle Temperature on Impact Behavior and Crystallization
Ti-Based Quasicrystal Layers Produced by Plasma Thermal Spraying
3D Printing of Biocompatible PM-Materials
Characteristics of Laser Aided Direct Metal Powder Deposition Process for Nickel-Based Superalloy
Direct Metal Laser Sintering - New Possibilities in Biomedical Part Manufacturing
Establishment of Laser Sintering Technique for Titanium Powder
High-Throughput Preparation and Characterization of Powder and Thin-Film Library for Electrode Materials
Micro Fabrication Process of Powder Compact with Semi-Solid Mold
Three-Dimensional Printing of Shape Memory Alloys
A Solution for Diffusion Equations and the Distribution of Alloying Elements in Sintered Alloys
Abnormal Grain Growth Mechanism of Calcium Hexaluminate Phase
An Investigation on the Sintering Behavior of High Strength Al-Zn-Mg-Cu Alloy Prepared from Elemental Powders
Analysis of Particle Rearrangement during Sintering by Micro Focus Computed Tomography (CT)
Assessment of the Corrosion Behavior of a Sintered Al-Cu-Mg Alloy in Aeronautical Environments as a Function of the Heat Treatment
Consolidation of Bulk Metallic Glass Composites
Densification Behavior and Microstructural Development of Nano-Agglomerate Powder during Sintering
Densification Behaviors of Fe-TiC System during Spark Plasma Sintering
Effect of the Preparation Methods of Me+Al Powder Blends on the Compaction Behavior, Structure, Phase Transformations, and Properties of the Compacted Aluminides of Transition Metals
Expansion Behavior of Iron-Copper Compact from (FeCu) Pre-Alloyed Powder
Fabrication of Deep-Sub-Millimeter-Thick Compacts Using Spark Plasma Sintering
Fabrication of Nanocrystalline TaSi2-SiC Composite by High Frequency Induction Heated Combustion Synthesis and Its Mechanical Properties.
Grain Growth Kinetics of Cobalt-Doped SnO2 by Varying Nb2O5 Content
Grain Growth Rate in SnO2 Ceramics Doped with Varying Ratios of Nb2O5/CoO
Improvement in Microstructure Homogeneity of Sintered Compacts through Powder Treatments and Alloy Designs
In Situ Observations of Sintering Process during Pulsed Current Sintering of Al2O3, ZnO and WC Alloy
Influence of Sintering Parameters on the Mechanical Performance of PM Steels Pre-Alloyed with Chromium
Investigation of Sintering Behaviors of Steatite Parts Produced by Powder Injection Molding
Liquid Phase Sintering of a Boron Alloyed Austenitic Stainless Steel
Low-Temperature Sintering and Electromagnetic Properties Evaluation of (Ni/Mn)CuZn Ferrite
Microstructure and Tensile Properties of Tungsten Heavy Alloys
Microstructure Characteristics and Electrical Properties of Sintered (Bi,La)4Ti3O12 Ferroelectric Ceramics
Model Calculation of Grain Growth in a Liquid Matrix
Multi-Scale Virtual Reality of Sintering
Oxygen Removal during Sintering of Steels Prepared from Cr-Mo and Mo Prealloyed Powders
Preparation and Properties Study of Cu-MoSi2 Composites
Preparation and Sintering Behavior of Fe Nanopowders Produced by Plasma Arc Discharge Process
Pulsed Electric Current Sintering of Nano-Crystalline Iron-Base Powders
Research on Two Sintered Techniques of Nanometer WC-Co Powder
Sintering Behaviour of Al-Cu-Mg-Si Blends
Synthesis and Densification of Nanostructured Al2O3-(Zro2+3%Mol Y2O3) Bioceramics by High-Frequency Induction Heat Sintering
The Effect of MgO-Y2O3 on Al2O3-TiC Composites
True Sedimentation and Particle Packing Rearrangement during Liquid Phase Sintering
A New Technology of Hardening Porous Materials of Titan Powders
A Preliminary Study of the Development of 9Cr Fe-Base ODS Alloys: The Effects of Minor Elements and Cooling Rate
Fabrication of Cordierite Honeycomb from Fly Ash
Hardenability of Low Alloy Sintered Mn Steels
Influence of Tempering Temperature and Microstructure on Wear Properties of Low Alloy PM Steel with 1-2 % Ni Addition
Sinter-Bonding of Iron Based Compacts Containing P and Cu
Study for the Development of Fe-NbC Composites by Advanced PM Techniques
An Investigation on Elongation-Porosity Relation in Sintered 17-4 PH Stainless Steel
Application Experiences in Powder Compaction of Iron Powder - Influence of Tool Material on Tool Life
Capabilities of Two Chromium Powder Metallurgy Steels for High Performance Applications at Conventional Sintering Temperatures
Comprehensive Wear Study on Powder Metallurgical Steels for the Plastics Industry, Especially Injection Moulding Machines
Development of PM Stainless Steels with Improved Properties through Liquid Phase Sintering
Dimensional Precision in Sinter-Hardening PM Steels
Effect of Heat Treatment Conditions and Densities on Residual Stresses at Hybrid (FLN2-4405) P/M Steels
Effect of Repeated Quenching Heat Treatment on Microstructure and Dry Sliding Wear Behavior of Low Carbon PM Steel
Fatigue Properties for Sinter-Hardened Fe-Ni-Mo-Cu Materials
Functional Relationships between Fatigue Data
Gigacycle Fatigue Crack Initiation in Cr-Mo Prealloy Sintered Steel
Gigacycle Fatigue Endurance Strength of High Density Mo and Cr-Mo Prealloyed Sintered Steel
Influence of Binders on the Structure and Properties of High Speed-Steel HS6-5-2 Type Fabricated Using Pressureless Forming and PIM Methods
Modification of Low Alloyed Steels by Manganese Additions
Nominally Equivalent Powders for P/M Steels: Analysis of Response to Sintering and Differences at Various C Content
Processing Routes for Obtaining Novel High Performance Mn-Containing PM Steels
Rolling Contact Fatigue of Hot-Forged Steels out of Prealloyed Powders and Powder Blend
Rolling Contact Fatigue Property of Sintered and Carburized Compacts Made of Molybdenum Hybrid-Alloyed Steel Powder
SCC Inhibitors for SG Tube Materials in Nuclear Power Plants
Sintered Duplex Stainless Steels Corrosion Properties
Sintered Structural Cu-Ni-Mo-C Low Alloyed Steels with Small Niobium Additions
Sintering Processing of Compressor Flanges
Sintering Stainless Steels with Boron Addition in Nitrogen Base Atmosphere
Stable and Unstable Crack Growth in Chromium Pre-Alloyed Steel
Strain Hardening Behaviour of PM Alloys with Heterogeneous Microstructure
Stress Corrosion Cracking of Alloys 600, 690, and 800 in a Tetrathionate Solution at 340 DegreesC
Study of Elastic Moduli of Sintered Low Alloy Steels by Acoustic Pulse Method
The Effect of Chemical Composition of Sintering Atmosphere on the Structure and Mechanical Properties of PM Manganese Steels with Chromium and Molybdenum Additions
The Effect of Cooling Rate on the Structure and Mechanical Properties of Fe-3%Mn-(Cr)-(Mo)-C PM Steels
The Sintering Behaviour of Fe-Mn-C Powder System, Correlation between Thermodynamics and Sintering Process, Mn Distribution and Microstructure
A Comparative Study of Mechanical Property in Al-8Fe-2Mo-2V-1Zr Bulk Alloys Fabricated from an Atomized Powder and a Melt Spun Ribbon
A Study of Debinding Behavior and Microstructural Development of Sintered Al-Cu-Sn Alloy
Aluminium and Aluminium Alloy Powders for P/M Applications
Blended Elemental P/M Synthesis of Titanium Alloys and Titanium Alloy-Based Particulate Composites
Development of P/M Aluminum Alloy with Fine Microstructure
Effect of High-Energy Ball Milling on the Mg Alloy Powders under Alcohol Protection
Effect of Porosity Content on the Weldability of Powder Metal Parts Produced by Friction Stir Welding
Effect of Powder Size of Mg-Zn-Y Alloy on the Consolidation
Effect of Powder Size on Infiltration Height in Producing MgO Reinforced Al Matrix Composite by Vacuum Infiltration Method
Extrusion of CP Grade Titanium Powders Eliminating the Need for Hot Pre-Compaction via Hot Isostatic Pressing
Fabrication of TiAl Target by Mechanical Alloying and Applications in Physical Vapour Deposition Coating
Gas Chromatographic Analysis of Degassing of Aluminum and Aluminum Alloy Powders
Influence of High-Energy Milling and Sintering Cycle on Obtaining TiAl from Elemental Ti and Al Powders
Interactions in Titanium Matrix Composites Reinforced by Titanium Compounds by Conventional PM Route
Macro-Interface Characteristics of Bimodal-Structured Al Materials Produced by Ball-Milling
Mechanical and Microstructural Properties of Titanium Matrix Composites Reinforced by TiN Particles
Microstructure and Properties of Zn61Al34M5 Alloy Produced by Rapid Solidification and Warm-Compacting Sintering Process
Microstructures and Mechanical Properties of Consolidated Mg-Zn-Y Alloy
Softening-Hardening Mechanism in the Direct Hot-Extrusion of Aluminium Compacts
Study of TiCn Additions to an 2xxx Series Aluminium Alloy
The Influence of Heat Treatment on Corrosion Resistance of PM Composite Materials Based on EN AW-AlCu4Mg1(A) Aluminium Alloy Reinforced with the Ti(C,N) Particles
Aging Characteristics of Al P/M Composites with Variation of Ceramic Contents
Carbon-Nanofiber Reinforced Cu Composites Prepared by Powder Metallurgy for Thermal Management of Electronic Devices
Compressive Behavior of 7xxx Series Al Composites Reinforced with Al2O3
Creep Behavior of Hot Extruded Al-5% SiC Composite Powder
Effect of Carbon-Nanotube Addition on Thermal Stability of Ti-Based Metallic Glass Composites
Effect of Cutting Tool Materials on Surface Roughness and Cutting Forces in Machining of Al-Si3N4 Composite Produced by Powder Metallurgy
Effect of Hot-Forging on NiTi Shape Memory Alloy Fibers Reinforced Mg Alloy Composite
Effect of Post Deformation on the Structure and Properties of Sintered Al-Cu-SiC Composites
Elaboration by Tape Casting and Hot Rolling of Copper/Silicon Carbide Composite Thin Films for Microelectronic Applications
Fabrication of Al2O3/Cu Nanocomposites by Atmosphere-Controlled Sintering and Their Properties
Fabrication of Carbon Nanotube Reinforced Aluminum Composite by Powder Extrusion Process
Fabrication of CNT-Reinforced HAp Composites by Spark Plasma Sintering
Hot Deformation Behavior of P/M Al6061-20% SiC Composite
Investigation of Microstructure Inhomogeneity in SiCp-Reinforced Aluminum Matrix Composites
Mechanical Properties of W-X (X=Cu, Ag or BAg-8) Composites
Microstructure Characterization of SiCp-Reinforced Aluminum Matrix Composites by Newly Developed Computer-Based Algorithms
Preparation of Warm Compacted NbC Reinforced Iron-Based Composite and Its Tribological Behavior
Reaction Synthesis and Mechanical Properties of B4C-Based Ceramic Composites
Shock-Wave Synthesis of Titanium Diboride in Copper Matrix and Compaction of TiB2-Cu Nanocomposites
Sinter Forged MMC Components for Wear-Parts
Studies on Preparation of Ti3SiC2 Particulate Reinforced Cu Matrix Composite by Warm Compaction and Its Tribological Behavior
Surface Modification of Ag Coated Cu Conductive Metal Powder for Conductive Silicone Sealant Gasket Paste
A Study on Kinetics Parameters of Titanium Hydride Powder from Its TPD Spectrum for Metal Foam
Bend Deformation Behavior of Silicon Carbide Reticulated Porous Ceramics
Corelationship Between Powder Metallurgy and Casting Method Using SiC Powder for Metal Foam
Development of Some New Porous Metal Materials
Effect of Substrate Porosity on the Coating Adhesion of Iron Sintered Plated Parts with Infiltration Pretreatment
Fabrication of Gas-Permeable Die Materials Having Orthogonally Arrayed Pore Channels
Fabrication of Graded Porous Structure with Pore Size Distribution by SPS Process
Fabrication of Porous Material Using Glass Abrasive Sludge
Low-Cycle Fatigue Performances of P/M Ti-Fe-Mo-Al-Nd Alloy
Micro-Porous Nickel Produced by Powder Metallurgy
Net-Shape Manufacturing of Micro Porous Metal Components by Powder Injection Molding
Preparation of Titanium Microfiltration Membrane by Field-Flow Fractionation Deposition
Processing of Polymer-Derived Microcellular Ceramics Containing Reactive Fillers
Production of Titanium Porous Material "Tiporous" and Its Evaluation
Recycling of Stainless Steel Grinding Sludge
Sintered Fe3Al Intermetallic - A New Filter Element for Hot Gas Filtration
Synthesis and Properties of Open-Celled Metal Foams
Aqueous Processing of Textured Silicon Nitride Ceramics by Slip Casting in a Strong Magnetic Field
Biomimetic Deposition of Apatite on Zr-1Nb and Ti-6Al-4V
Design of Porosity Level for Porous Si3N4 Ceramics Manufactured by Nitriding and Post-Sintering of Si Powder Compact
Effect of Powder Synthesis Processing on the Microstructure and Electrical Conductivity of Sintered CNTs/Fe/Al2O3 Nanocomposites
Effects of Y2O3 Addition on the Microstructure and Electrical Property of TiO2-Excess BaTiO3
Formation of Barrier Ribs via Micro Molding Process Using UV-Curable Paste
High-Frequency Induction Heating Sintering of Hydroxyapatite-(Zro2+3%Mol Y2o3) Bioceramics
High Temperature Stability of Bulk Ti3SiC2 Materials in Air
Making Alumina Microcomponents From Al Powder
Mechanism of the Voltage Occurrence in BSCCO Superconductor
Microstructure Control of Porous In-Situ Synthesized Si2N2O-Si3N4 Ceramics
Nozzles from Alumina Ceramics with Submicron Structure Fabricated by Radial Pulsed Compaction
Phase Orientation of a TiC-TiB2-SiC Ternary Eutectic Composite Prepared by An FZ Method
Polymer Derived Ceramic Seals for Application in SOFC
Powder Characteristics and Sintering Behavior of SiO2 Coated BaTiO3
Preparation and Characterization of LnTaO4 (Ln = La, Nd, Sm, Dy, Er and Tm)
Preparation of Silicon Nitride-Silicon Carbide Composites from Abrasive SiC Powders
Sintering and Mechanical Properties of Chromium Boride - Chromium Carbide Composites
Synthesis and Characterization of Delafossite CuLaO2 for Thermoelectric Application
Synthesis and Mechanical Properties of Nano Laminating Cr2AlC using CrCx/Al Powder Mixtures
The Effect of Oxygen Addition on Oxidation Resistance and Cutting Performance of Si3N4 Ceramics
Characteristics of Pre-Alloyed Powders for Diamond Tools
Creation of Diamond/Molybdenum Composite Coating in Open Air
Diamond Tools with Diamond Grits Set in a Predetermined Pattern
Effect of Cobalt to Bronze Ratio on Transverse Rupture Strength of Diamond Segments
Effect of Phase Transformation and Grain-Size Variation on the Dry Sliding Wear of Hot-Pressed Cobalt
Matrix Composition Effect on the Wear Behaviour of Diamond Segments
New Pcbn for Heavy Interrupted Cutting of Hardened Steel
Powder Metallurgy Diamond Tools - A Review of Manufacturing Routes
Resistance to Abrasive Wear of Materials Used as Metallic Matrices in Diamond Impregnated Tools
Sinetring of Cobalt - (3-25 wt.%) Iron Materials
The In-Situ Dressing of CMP Pad Conditioners with Novel Coating Protection
The Metallization of Diamond Grits
The Revolution of Diamond Synthesis Technology
Thermal Protection Shield Concept for Diamond Impregnated Tools
A Study of Reduced and Carburized Reactions in Dry-Milled WO3+Co3O4+C Mixed Powders with Different Carbon Content
Binder-Free Tungsten Carbide Fabricated by Pulsed Electric Current Sintering
Development of High Corrosion Resistant Mo2NiB2 Boride Base Cermets for Plastic Injection Molding Machine Parts
Effect of Adding a Type of Binder Phase on The Microstructure, Properties and Heat Treatment of Steel Bonded TiC Cermets
Effect of Secondary Carbide Addition on Properties of Ti(C0.7N0.3)-Ni Cermets
Effect of Sinter/HIP Technology on Properties of TiC-NiMo Cermets
Effect of TiC Content on Oxidation Behavior of Sintered WC-TiC-TaC Alloys
Effects of Inhibitors on the Synthesization of WC/Co Composite Powders by Mechanochemical Method
Electro Discharge Compaction of WC-Co Composite Material Containing Particles of Diamond
Fabrication of Nano-Sized WC/Co Composite Powder by Direct Reduction and Carburization with Carbon
Formation of Twinned WC Grains during Carbonization of Eta Phase (W3Co3C)
Friction and Wear Behaviors of WC-Co/WC-Co Pairs in Air
Hybrid Composite Nano-Sized WC-Co Cemented Carbide
Influence of Cobalt Content on the Fatigue Strength of WC-Co Hardmetals
Measurement of WC Grain Size in Nanocrystalline WC-10Co Hardmetal
Microstructural and Mechanical Characteristics of in Situ Synthesized Chromium-Nickel-Graphite Composites
Microstructure Features of Large Grains in WC-Co Alloys
On the Solubility of Chromium in Cubic Carbides in WC-Co-MC-Systems
Performance of Cemented Carbides in Cyclic Loading Wear Conditions
Research on Microstructure and Properties of TiN, (Ti, Al)N and TiN/(Ti, Al)N Multilayer Coatings
Spark Plasma Sintering and Hot Pressing Sintering of Nanocrystalline WC-10CO-0.8VC
Structural and Mechanical Properties of Multilayered CVD TiC/TiCN Coatings with Variations of Multilayer Period
Synthesis of WC-10wt.%Co Nanocrystalline Powders with Grain Growth Inhibitor by MTP
The Effect of Substrate Surface Characteristics on AIP PVD Coating of Cemented Carbide Inserts and Their Cutting Performance
The Study of Synchronous Reduction-Carbonization of V2O3, Cr2O3 and W-Co Composite Oxides in Fluidization
Development of Tungsten Heavy Alloy with Hybrid Structure for Kinetic Energy Penetrator
Effect of Cu during Non-Isothermal Hydrogen Reduction of MoO3
Enhancement of Microstructural Homogeneity of W-Cu Pseudo-Alloy by Adding W-Cu Composite Powder in Infiltration Process
Fine-Grained Tungsten Heavy Alloy by Mechanical Alloying with Yttrium Oxide Addition
Influences of Doping Methods on Microstructure and Fracture Toughness of Mo-La Alloys
Mechanical Properties of Refractory Metals at Extremely High Temperatures
Microstructures of W-Mo-Ni-Fe Heavy Alloys
Neutron Diffraction Analysis of Tungsten-Molybdenum-Disilicide Powders Formed by Self-Propagating High Temperature Synthesis
Porous Metals of Northwest Institute for Non-Ferrous Metal Research
Powder Metallurgy of Tungsten Alloy
Study on Oxidation Behavior of (W,Mo)Si2 Powders in Air at 400, 500 and 600 DegreesC
The Effects of Molybdenum Content on the Dynamic Properties of Tungsten-Based Heavy Alloys
Bulk Amorphous and/or Nanocrystalline Finemet Alloy Prepared by Super-High-Pressure Consolidation
Determination of Non-Stoichiometry of Tubular Titanium Carbide Formed by Self-Propagating High Temperature Synthesis
Effect of Ba Strate Addition on Magnetic Properties of Ba-System W-Type Ferrite Magnets
Effect of Particles Size on Magnetic Performance of Dielectromagnetics
Effects of Crystal Grain Size and Particle Size on Core Loss for Fe-Si Compressed Cores
Evaluation of DC Brush-Less Motors Using Powder Magnetic Cores
Improved Magnetic Properties of Silicon-Iron Alloy Powder Core
Improvement of Super Low Core-Loss Soft Magnetic Materials
Insulation and Magnetic Properties of Iron Powder Coated by Wet Chemical Method
Iron-Based P/M Soft Magnetic Material for Electric Devices Operating at High Frequencies
Low-Temperature Sintering of Mn-Zn Ferrites Using a Media Agitation Mill
Magnetic Properties and Microstructure of Sm2Co17-Based High Temperature Permanent Magnet
Magnetic Properties of Amorphous FeSiB and Nanocrystalline Fe73Si16B7Nb3Cu1 Soft Magnetic Sheets
Microstructure and Magnetic Properties of Nd2Fe14B/ -Fe Nanocomposite Prepared by HDDR Combined with Mechanical Milling
Magnetic Properties Obtained for Fe-50Co Alloy Produced by MIM with Elemental Powders
Polyamine Group Assembled Silica Coated Ferrite Nanoparticle or Lambda DNA Detection
Properties of Soft Magnetic Composite with Evaporated MgO Insulation Coating for Low Iron Loss
Sm2Fe17 Prepared by Calciothermic Reduction-Diffusion Using Different Iron Powders
Test Results of SMC Cores as Some Types of Motor Cores
Cold and Detonation Spraying of TiB2-Cu Nanocomposites
Dispersion of Alloy 625 Nanoparticles in Ethanol
Effect of Working Temperature on Microstructure and Mechanical Properties of Ultrafine Grained Al and Al-5vol.%SiCp Composite Processed by Accumulative Roll-Bonding
Fabricating Devices Using Nano-Particulates with Direct Write Technology
Fabrication of Nanostructured Fe-Co Alloy Powders by Hydrogen Reduction and Its Magnetic Properties
Gd2O3:Eu System: Structural Study of the Influence of Luminescence Center Concentration
Metal Plasma Source Ion Implantation Using a Pulsed Cathodic Arc
Microstructure and Mechanical Properties of Nanostructured Aluminum Consolidated by SPS
Powder Metallurgy of Nanostructured High Strength Materials
Preparation and Sintering of Nano-Sized W-Ni-Fe Powder by Sol-Spray-Drying Process
Properties of TiAl and TiAlN Thin Films by Pulsed Cathodic ARC
Sintering of Mechanically Alloyed YSZ Nanocrystalline Powders
Structure Peculiarities of Nanocomposite Powder Fe40Al/Al2O3 Produced by MASHS
Thermoelectric Properties of Nanostructured CoSb3 Synthesized by Mechanical Alloying
Amorphous Diamond for Generating Cold Cathode Fluorescence Light
Development of Conductive and Anticorrosive Paint Dispersed with Carbon Particles for Metal Separators of PEFC
Development of High Performance Multi-Lobe Fluid Dynamic Bearings Using a Sintered Material
Displacement Properties of Newly Developed 3-Dimensional Piezoelectric Actuator at Various AC Frequencies
Electroless Coating Process of Carbon Nano Fibers by Copper Metal
Electromagnetic Properties of Silver Coated Iron Based Alloy Powders Prepared by Chemical Reduction Method
Electrophoretic Deposition of Ni Nano-Particles for Self-Repairing of Heat Exchanger Tubes
Glass Infilteration in Bonding of BaTiO3 and Al2O3 Layers
Interfacial and Surface Characterization of Fluorine Treated SnAgCu and NiTi Powders and NiTi/SnAgCu Composite Materials
Microwave Absorbing Properties of Flaky Fe-Si-Al Alloy Powder-Rubber Composites
Non-Electrolytic Deposition of Silver on Tungsten Powders for Functionally Gradient Composite Powder
Oxidation State of Manganese in LiMn2O4 Powders and Its Effect on Electrochemical Properties
Phase Transformation Behavior of Bi2O3-ZnO-Nb2O5 Ceramics Sintered at Low Temperature
Photocatalytic Performance of Barium-Doped Strontium Tantalate
Preparation of Ru-C Nano-Composite Film by MOCVD and Electrode Properties for Oxygen Gas Sensor
Production of Dispersion-Strengthened Cu-TiB2 Alloys by Ball-Milling and Spark-Plasma Sintering
P-Type and N-Type Bi2Te3/PbTe Functional Gradient Materials for Thermoelectric Power Generation
Shrinkage Free Sintering of Low Temperature Cofired Ceramics by Glass Infilteration
Sintering of High K LTCC Compatible Dielectrics
Structural and Thermal Properties of Hot Pressed Cu/C Matrix Composites Materials Used for the Thermal Management of High Power Electronic Devices
The Characteristics of Sulfur Electrode with Carbon Nanotube
The Influence of Production Process Parameters on the Properties W-Ag, Mo-Ag Composites
Thermal Stability and Properties of Cu-TiB2 Nanocomposites Prepared by Combustion Synthesis and Spark-Plasma Sintering
Development of the High Performance Thermoelectric Modules for High Temperature Heat Sources
Effect of Li2O Addition on Piezoelectric Properties of NKN-5LT Ceramics
Elaboration of (Steel/Cemented Carbide) Multimaterial by Powder Metallurgy
Graded Powder Composites by Freeze Drying, Electrophoretic Deposition and Sintering
Hard, Wear Resistant Metal Surfaces for Industrial Applications through Laser Powder Deposition
Microstructure and Sintering Behavior of ZnO Thermoelectric Materials Prepared by the Pulse-Current-Sintering Method
NiAl Behavior at Plasma Spray Deposition
The Effect of Hot Extrusion on the Structure and Thermoelectric Properties of Bi2Te3 Material
Thermoelectric Material Design in Pseudo Binary Systems of Mg2Si - Mg2Ge - Mg2Sn on the Powder Metallurgy Route
Thermoelectric Properties of Fe-Doped CoSb3 Prepared by Encapsulated Induction Melting and Hot Pressing
Thermoelectric Properties of Ni-Doped CoSb3 Prepared by Encapsulated Induction Melting and Hot Pressing
Thermomechanical Properties of Functionally Graded Al-SiCp Composites
Tungsten/Copper Functionally Graded Materials: Possible Applications and Processing through the Powder Metallurgy Route
Wear Resistance Properties of Tungsten Carbide/Stainless Steel Composite Materials Prepared by Pulsed Current Sintering
High Temperature Microstructural Stability of Si3N4 in TiAl Alloys
Ni3Al-Fe-Cr Alloy Processed by Combined Mechanical Alloying - Reactive Synthesis
Preparation, Structure, and Properties of Ni3Al and NiAl Light Powder Alloys for Aerospace
Structure and Properties of MASHS Titanium Aluminide-Based Powder Alloyed with Chromium
Effect of Processing Factors on Critical Current Density in Bi2212/Ag Wires
Fabrication of Bi-2212/SrSO4 Composite Superconductors by Melting Powder Mixtures
Fabrication of TFA-MOD YBCO Films Using the Y2Ba1Cu1Ox and Ba3Cu5O8 Powders
Texture Evolution in Ni Substrate Prepared by Powder Metallurgy and Casting Methods
The Effect of Deformation Stress-Strain and Temperature on The Ic Degradation of Bi-2223/Ag Tapes
Difference in Filling Property between Two Types of Binder Treated Powders Made of Atomized or Reduced Iron Powder
Biocompatibility and Mechanical Performance of Ni-Ti
Prediction of Packing Density of Milled Powder Based on Packing Simulation and Particle Shape Analysis
Recent Advances in Dry-Bag Cip Equipment
by "Nielsen BookData"