THERMEC 2006 : supplement to THERMEC 2006, 5th International Conference on Processing and Manufacturing of Advanced Materials, July 4-8, 2006, Vancouver, Canada

著者

• International Conference on Processing & Manufacturing of Advanced Materials (5th : 2006 : Vancouver, B.C.)
• Chandra, T.

書誌事項

THERMEC 2006 : supplement to THERMEC 2006, 5th International Conference on Processing and Manufacturing of Advanced Materials, July 4-8, 2006, Vancouver, Canada

edited by T. Chandra ... [et al.]

（Materials science forum, v. 539-543）

Trans Tech pub., c2007

• set
• pt. 1
• pt. 2
• pt. 3
• pt. 4
• pt. 5

注記

Includes bibliographical references and index

内容説明・目次

内容説明

The present set of volumes comprises selected papers from the 5th International Conference on the Processing and Manufacturing of Advanced Materials - THERMEC'2006 - held from July 4-8, 2006 in Vancouver, Canada.

目次

• Compelling Global Issues in Science and Technology and the Role of Materials Science Strong Ferritic-Steel Welds Effects of Alloying on Deformation Behavior of Low Carbon Steels in the Intercritical Temperature Range Materials Engineering for Solid Oxide Fuel Cell Technology Optimization of Nb HSLA Microstructure Using Advanced Thermomechanical Processing in a CSP Plant Development of New Actuators for Flapping Wing Flight Microstructural Design for Advanced Structural Steels New Materials and Construction Methods for Multi-Material-Design, Lightweight Construction and Modularity in Future Vehicle Concepts Carbon, Nitrogen and Hydrogen in Steel: Similarities and Differences in their Effect on Structure and Properties Multi-Scale Numerical-Experimental Analysis of Failure in Solder Alloys Developments of Fuel Cell and Hydrogen Technology at NRC's Institute for Fuel Cell Innovation Microstructural Evolution in the Processing of Bulk Samples Using High-Pressure Torsion Microstructure and Texture of Zirconium and Titanium Grain Refined by Equal Channel Angular Pressing Syntheses and Applications of Fe-, Co-, Ni- and Cu-Based Bulk Glassy Alloys The Strain Dependence of Post-Deformation Softening during the Hot Compression of 304H Stainless Steel Development of a Magnesium Recycling Alloy Based on AM50 Current Research Activities on High Nitrogen Steel in Japan Microstructure and Mechanical Properties of Twin-Roll Strip Cast Mg Alloys Strength and Fracture of Aluminium Alloys Manufacturing and Oxidation Behavior of Silicide-Based Nanocomposite Coatings on Refractory Metals by Displacement Reaction Mechanical Properties of a Spray-Cast Aluminum Alloy Processed by Severe Plastic Deformation Changes in Lattice Constants and Orientation of <100> and <111> Grains in Nanocrystalline Ni and Ni-Fe Electrodeposits after Annealing Formation of (Ferrite+Cementite) Microduplex Structure by Warm Deformation in High Carbon Steels Laparoscopic Surgical Manipulations Affect the Mechanical Properties and the Microstructure of Polymeric Sutures Development of Aluminium Alloys with Ultimate Recrystallisation Resistance Multifunctional Ti-Si-B-C-N Tribological Nanocomposite Coatings for Aerospace Applications Computational Welding Mechanics and Concept of Inherent Strain for Industrial Applications Fabrication of Lotus-Type Porous Metals by Continuous Zone Melting and Continuous Casting Techniques Recent Research and Development in Metallic Materials for Biomedical, Dental and Healthcare Products Applications On the Size of Representative Volume Element in Elastic, Plastic, Thermoelastic and Permeable Random Microstructures Understanding Process and Property Relationships in Aluminum Alloy Friction Stir Welds The c/a Ratio in Quenched Fe-C and Fe-N Steels - A Heuristic Story High Temperature Oxidation of Steel
• New Description of Structure and Properties of Oxide Effect of Dislocation Distribution on the Yielding of Highly Dislocated Iron A Neutron Scattering Study on Microstructure and Deformation Behavior in Nitrogen Bearing Austenitic Steels Thermal Applications of Cellular Lattice Structures Current Status and Next Generation Advances in Fuel Cell Research and Development Creep Data Rationalization for Power Plant Steels Research and Development of Inconel 718 Type Superalloy Deformation Mechanisms of Nanocrystalline Materials Solute and Second Phase Evolution during Industrial Processing of AA3103 Application of Local Tomography Technique to High-Resolution Synchrotron X-Ray Imaging Change of Young's Modulus of Cold-Deformed Aluminum AA 1050 and of AA 2024 (T65): A Comparative Study The Effect of Chemistry and Cooling Rate on the Latent Heat Released during the Solidification of the 3XX Series of Aluminum Alloys Behavior of Hydrogen in Al-4%Mg Alloys during Heat Treatment Phase Transformation for Primary Particles in the Surface Regions of an AA1200 Alloy Tailoring the Mechanical Properties of Al-Sn-Alloys for Tribological Applications New Application of Electromagnetic Vibration Process for Creation of High Potential Metallic Materials The Effect of Electromagnetic Vibration on the Structure Control of A356 Alloy Increase of Lankford Value of Al-Mg-Si Sheets for Automotive Panel Produced by Asymmetric Warm Rolling Methodology for Automatic Control of Automotive Al-Si Cast Components Reversion Treatment to Improve Bake Hardening Response of a Twin-Roll Cast 6016 Automotive Sheet New Analyses of Pressure Filtration Curves of Al Alloys: A Case Study Superplastic Properties of a Newly Developed Al-Mg-High Mn Aluminum Alloy Sheet In-Situ SEM/EBSP Analysis during Annealing in a Pure Aluminum Foil for Capacitor Damage Mechanisms of 5A06 Al Alloy Weld Joints under Constant Load and Thermal Cycling Condition Projection of Extrusion Force of Spray-Formed Al-25wt%Si with High Temperature Compression Effect of Fe Content on Hot Tearing of High-Strength Al-Mg-Si Alloy Modelling Dispersoid Precipitation in Scandium Containing Aluminium Alloys Alloying with Silicon and Copper in Aluminum Alloys A Study of Bubble Entrainment as Related to Runner Velocity in Aluminum Sand Castings Using the Cosworth Process Surface Treatment of Aluminum Alloy with Laser Irradition to Increase Wear Resistance Evaluation of Friction Spot Joining Weldability of Al Alloys for Automotive Atomic Bonding of Precipitate and Properties of Al-Cu-Mg Alloy Robust Trimming of Automotive Panels Ultrasonic Leak Test for Automotive Brake Caliper Influence of Vacancy Formation and Mg Migration on Cracking in Spot Welding AA5754 Alloys Ageing Characteristics and Microstructural Evolution in Microalloyed Al Alloys Microstructural Aspects by Electron Microscopy Observed in Al-Mg Based Alloys after Special P/M Processes Microsegregation Effect of Copper in Solidification of A356 Alloy Control of the Alloying Element Distribution in Al-Alloys by High Magnetic Fields The Influence of 0.1% Sc Addition on the Microstructure and Texture Development in Al-Zn-Mg-Cu-Zr Alloys Substructures and Fatigue Crack Growth in HIPing and Semi-Liquid Die Casting A356 Alloys Behavior Analysis of Environmental Hydrogen in High-Magnesium Al-Mg Alloys by Hydrogen Microprint Technique Effect of Mn Addition on the Mechanical Properties in Al-Cu-Li-Mg-Ag-Zr Alloys Structure and Properties of AlMg3 Alloy with Sc and Zr Structure Development during ECAP and Subsequent Creep of Aluminium The Continuous Elimination of Inclusions in Molten Aluminum by Direct and Alternate Electromagnetic Force Nanostructured Shape Memory Alloys for Biomedical Applications Nanotechnology: Better Materials for All Implants Cellular Activity and Biomaterial's Surface Topography A Prototype Continuous Flow Polymerase Chain Reaction LTCC Device Plasma and Electrospray Deposition to Improve the Biocompatibility of Stents An Injectable Biomaterial for Bone Repair Evaluating the In Vitro and In Vivo Efficacy of Nano-Dimensional Polymeric Scaffolds for Bladder Tissue Replacement Applications Soft Tissue Ingrowth in Metal Rods with Varying Surface Textures and its Clinical Significance Biofunctional Materials for Nerve Regeneration Calcium Phosphate Films Coated on Titanium by RF Magnetron Sputtering for Medical Applications Mechanical Properties and Microstructures of Beta-Type Titanium Alloy for Biomedical Applications Biofunctional Hybrid of Titanium with Polymers Gamma-Poly(glutamic acid)/Chitosan Composite Scaffolds for Tissue Engineering Applications Degradation Studies of Some Polymeric Biomaterials: Polypropylene (PP) and Polyvinylidene Difluoride (PVDF) Chitosan Polyelectrolyte Complexes for Use in Tissue Engineering and Drug Delivery Mechanical Characterization of Hydroxyapatite-Based, Organic-Inorganic Composites Spontaneous and Biomimetic Apatite Formation on Pure Magnesium Electrostatic Nanomechanics of Cantilever Biosensors The Remineralizing Effect of Carbonate-Hydroxyapatite Nanocrystals on Dentine Tribological Characterization of Surface Treated Titanium for Orthopaedic Joints Investigation of the Hydroxyapatite Crystallites in Bone at the Interface with Implant by Neutron Diffraction Preparation of Poly(Lactic Acid) Composites Containing Vaterite for Bone Repair Ageing Studies of Plasma Deposited Organic Films by Surface Chemical Analysis (ESCA, ToF-SIMS, XAS) Common Features on Damage Mechanisms Identified on Various Metal and Ceramic on Polyethylene Articulating Surfaces of Total Hip Prostheses Mechanical Properties and Biocompatibility of Porous Titanium Prepared by Powder Sintering Receptor-Mediated Gene Delivery Using Chitosan Derivatives In Vitro and In Vivo Microstructures and Mechanical Properties of Biologically-Inspired Ti-Nb Based Alloys with Ternary Element Additions Calcium Phosphate Precipitation by Galvanic Current between Titanium and Gold in Pseudo-Body Fluid Preparation and Characterization of Octyl Methoxy Cinnamate (OMC
• 2-Ethylhexyl-p-Methoxy Cinnamate)-Trapped Mesoporous Silica Using Lecithin Different Processing Methods to Obtain Porous Structure in Shape Memory Polymers Carbon Nanotubes Grown by Catalytic CVD on Silicon Based Substrates for Electronics Applications Variation in Bone Quality during Regenerative Process Fretting Fatigue Studies of Surface Modified Biomedical Titanium Alloys Formation and In Vitro and In Vivo Evaluation of Surface Modified Implants by HAp, Carbonated-HAp and Titanium Oxide U.S. FDA Perspective on the Regulation of Cyanoacrylate Polymer Tissue Adhesives in Clinical Applications Trivalent and Hexavalent Chromium Issues in Medical Implants Cell Interactions with PDMS Surfaces Modified with Cell Adhesion Peptides Using a Generic Method In Vivo and In Vitro Evaluation of Coated HAp Films with Different Surface Morphology Alignment of HAp Crystal Using a Sample Rotation in a Static Magnetic Field Porous Titanium with Porosity Gradients for Biomedical Applications Effects of TiN Film Coating on the Electrochemical Behaviors of Dental Implant Screw Surface Effect of Calcium Phosphate Glass on Proliferation and Differentiation of MG-63 Cells in HA Scaffolds Influence of Applied Tensile and Bending Strains on Local and Overall Critical Current of Multifilamentary Bi2223-Composite Superconductor High Temperature Deformation Behavior and Microstructure Change in Nano Grain Composites Corrosive-Erosive Wear Studies of Al6061/Albite Composites Mechanical Properties of Composite Materials Consisting of M3/2 High Speed Steel Reinforced with Niobium Carbides Development of New Low Cost Discontinuously Reinforced Titanium Composites for Commercial Applications Low Pressure Infiltration of Molten Aluminum Alloy to Metal Fiber Preform Importance of Composite Design for the Microstructure of Bundle Drawned Multifilamentary Nb3Sn Wires SLEEM Study of MgAl2O4 at Interface betweeen Al2O3 and Matrix in Al2O3/Al Alloy Composite Materials Reducing Threshold Pressure for Infiltration of Al-12Si Alloys into Carbon Particle Compacts by Placing a Thin Layer of Sn at the Infiltration Front Processing Ti-Al-Nb Composite Sheet Materials Using Cold Roll Bonding and Reaction Annealing Evaluation of Wear Behavior of Feldspar Particles Reinforced Copper Alloy Composite Materials Development of High Strength Mo2NiB2 Ternary Boride Base Cermets Produced by Reaction Boronizing Sintering Combustion Synthesis of TiB2 Particle Dispersed Metal Matrix Composites Plasticity Mechanisms in Multi-Scale Copper-Based Nanocomposite Wires Phase Transformation and its Effect on Dry Sliding Wear of Electro-Pressure Sintered Cobalt and Cobalt-Base Composites Effect of Milling Condition on Properties and Microstructure of Copper Reinforced with 1% vol. NbC Laser Zone-Remelted Alumina-Based Eutectic In Situ Composite Crystal Structure of the '-Phase in Al-Mg-Si-Ag Alloy Polymer Nanocomposites as Candidates for Tribological Applications Analysis of Fine Stress Fields in Metal Matrix Composites Using HOLZ Patterns Mechanically Alloyed P/M Composites of Al-Mg-Silicide and Al-Mg-Oxide Systems Synthesis of Carbon Nanotube-Reinforced Al Matrix Composites Fabrication and Corrosion Properties of Iron Aluminum Alloy/Steel Laminated Composite Prepared by Clad Rolling Fabrication and High Temperature Creep Behavior of In Situ Synthesized (TiB+TiC)/Ti Composites Wettability of Basal and Prismatic Plane of Graphite by Molten Aluminum-Magnesium Alloy Fabrication of Nano-Laminar Glass/Metal Composites by Sintering Glass Flakes Estimation of Critical Composition for the Transition from Brittle to Ductile in W-Cu Composites Structure and Properties of PM Composite Materials Based on EN AW-AlCu4Mg1(A) Aluminium Alloy Reinforced with the Ti(C,N) Particles Bend and Shear Tests: Suitable Methods for Mechanical Characterization of Laminated Composite Materials Binder-Free Tungsten Carbide Fabricated by Pulsed Current Sintering Study of Environmental Corrosion Behavior and Mechanism of the Carbon/Epoxy Composite Effects of Spatial Distribution of Defects on Bending Deformation and Critical Current in Bi2223/Ag Superconducting Composite Tapes Mechanical Properties of the MG-Based Amorphous/Nano Zirconia Composite Alloy Production of MMCs on the Basis of Fibres Coated with the Metal Alloy by Magnetron Sputtering Stacking Faults and Growth Mechanism of In Situ TiB Whiskers and Interface Structures in SPSed TiB/Ti(FeMo) Composites High Performance Soft Magnetic Composite (SMC) Produced by Improved Process Synthesis and Characterization of Exfoliated Natural Mica/Polymer Nanocomposites A Novel Forming Process of Copper Cladding Aluminum Composite Materials with Core-Filling Continuous Casting The Effect of Boron on the Hardness and Fracture Toughness of WC-FeAl-B and WC-Ni3Al-B Composites Embossing on Epoxy Thermoset Polymer Using SiO2 Coated Nickel Template An Analysis on the Tensile Strength of Hybridized Reinforcement Filament Yarns by Commingling Process An Assessment of Mechanical Properties of Geo-Grid Reinforced Material and its Applicability Creep Properties of Alborex Reinforced AZ31 Matrix Mg Composites Containing Ag A Study on the Chemical Resistance of GT Composites Microscopic Evaluation of Commingling-Hybrid Yarns Internal Friction and Young's Modulus of 9Al2O3 2B2O3 Whisker Reinforced Aluminum Matrix Composite Novel Processing of Porous Titanium Composite for Producing Open Cell Structure Titanium Carbide Particulate Reinforced Titanium Based Composite by In Situ Process Effect of Vacuum Infiltration Boehmite Gel on Tribological Behavior of Friction Materials Particle Size Effects on Complex Permeability and Electromagnetic Wave Absorption Properties of Amorphous Alloy-Epoxy Composites Novel Separation Technique of Particle Reinforced Metal Matrix Composites by Fused Deposition Method Mechanical Properties of Porous Titanium Compacts Reinforced by UHMWPE Effects of Fillers on Electrical Properties of PTFE Composites for Circuit Breaker An Experimental Study on the Frictional Property and Long-Term Performance of GT/HDPE Composites Preparation of SiC/MoSi2 Composites by Mechanical Alloying and its Fracture Properties Effect of Al Content on Corrosion Resistance of (Ti1-xAlx)N Coatings under NaCl Deposit in Wet Oxygen at 600 DegreesC Enhancement of TBC (Thermal Barrier Coatings) Characteristics by Gas Tunnel Type Plasma Spraying Local Approach to Thermally-Sprayed Coating/Substrate Adhesion through LASAT (Laser Shock Adhesion Test) Self-Lubrication and Wear Behavior of TiC/a-C:H Nanocomposite Coatings Grain Refinement of Metal Surface Using Hot Shot Peening Adhesion Study of Cold-Sprayed CoNiCrAlY-Mo Coating of Inconel 625 Using the Laser Shock Adhesion Test (LASAT) Recrystallization in NiCoCrAlY Coated DS Nickel Base Superalloys during Thermal Aging Fabrication Routes of Microsized Electrochemical Biosensors Based on Single-Walled Carbon Nanotubes Interface Microstructure and Adhesion of Zinc Coatings on TRIP Steels Evaluation with Surface Analysis Equipment, of Casting Defects in Cast Iron Articles (review) Laser Shock Processing as a Method for the Improvement of Metallic Materials Surface Properties: A Discussion on the Influence of Combined Mechanical and Thermal Effects Elecrochemical Performance of LiNi1/3Co1/3Mn1/3O2 with Al2O3 Nano-Particle Coating Plasma Spray Deposition of Hydroxyapatite Coatings from Sol Precursors In Situ and Ex Situ Investigation of the Spallation of Thermally Grown Oxides Surface Modification of Steel Using Liquid Jet Peening (Fatigue Performance) High Temperature Oxidation Resistance of Two Ni(Co)CrAlYSi(Hf) Overlay Coatings Effect of Laser Surface Treatment on Microstructure and Properties of MRI 230D Mg Alloy Cutting Properties of PVD and CVD Coated A2lO 3 + TiC Tool Ceramic Correlation of Microstructure with Hardness and Corrosion Resistance of Surface Alloyed Materials Fabricated with Fe-Based Metamorphic Powders by Accelerated Electron Beam Irradiation Method Numerical Simulation of Thermal History in a Novel Spray Forming Process Modelling of Nitrogen Deposition Pressure Effect on Grain Size Development and Mechanical Properties of Nanocrystalline Ternary Nitride Coatings Prospective Applications of Gas-Eutectic Porous Materials (Gasars) in USA Novel High Temperature-Oxidation-Resistant Nanocomposites Developed by Nanocomposite Electrodeposition Deposition of Multi-Functional Coatings by Physical Vapour Deposition High-Temperature Tribological Properties of Barite-Type-Sulfate-Coated Substrates with Different Isoelectric Points Microstructural Evolution of Durable Thermal Barrier Coatings with Hf and/or Y Modified CMSX-4TM Superalloy Substrates The Effects of Process Parameters on Mechanical Property and Visual Aspect of Plasma Sprayed Y2O3 Coating Microstructure Characterization and Modeling of Splat Formation during Air Plasma Spraying for Inconel 625 Superalloy Mechanical and Electrochemical Properties of Plasma Electrolytic Oxide Coatings on Magnesium Alloys Characteristics of Gallium Oxide Nanowires Synthesized by the Metalorganic Chemical Vapor Deposition Formation and Characteristic of Room Temperature Electrolytic Sulfidized Coating on Hard Steel Substrate Prediction of Softening of High Speed Steel with Surface Nitriding for Hot Forging Surface Modification Technique Using Interfacial Reaction between Ti-Al Alloy and Steel Electrodeposition of Metallic Nanowires in Nanoporous Polycarbonate Films Analysis on the Microstructure of Ceramic Coating Layer Fabricated by Plasma Electrolytic Oxidation Improvement in Wear Resistance of Nano WC-Co Coatings Fabricated by Detonation Gun Spraying Corrosion Characteristics of TiN and ZrN Coated Ti-Nb Alloy by RF-Sputtering Zn-Al-Mg Coatings: Thermodynamic Analysis and Microstructure Related Properties Microstructural Features of Plasma Nitrided Molybdenum Alloy Steel Comparison with Physics and Chemical Property of SBS/AA Copolymer Using Thermal Polymerization and UV Graft-Polymerization Methods The Influence of Powder Types and Plasma Spray Conditions on Abrasive Wear of Nanostructured and Conventional Al2O3/TiO2 Coatings Lifetime of PEMFCs Solid Oxide Fuel Cell (SOFC) Development in Denmark Manufacturing of Solid Oxide Fuel Cells - Bridging the Gap from Laboratory to Industry Fuell Cell and Hydrogen Vehicles - State of the Art and Challenges for Improved Materials Proton Exchange Membrane Development and Processing for Fuel Cell Application Suspension Plasma Spraying of Intermediate Temperature SOFC Components Using an Axial Injection DC Torch Short Stack Performance of Intermediate Temperature - Operating Solid Oxide Fuel Cells with Hydrocarbon Fuel Processor Pulsed Laser Deposition of Sm0.2Ce0.8O1.9/Zr0.9Sc0.1O2 Bilayer Films for Fuel Cell Application Ni-Fe Bimetallic Anode for Intermediate Temperature Solid Oxide Fuel Cells Using LaGaO3 Based Oxide Electrolyte Solid - Phase Synthesis of Carbon Nanoparticles and their Application to Direct Methanol Fuel Cell Preparation of High Surface Area La0.1Ca0.9MnO3 and its Electrochemical Activities Processing and Properties of Advanced Solid Oxide Fuel Cells Synthesis and Sintering Behavior of Nano Crystalline Gd-Doped Ceria Development of Zirconium Based Non-Platinum Cathode for Polymer Electrolyte Fuel Cell Plasma Spray Processing of Solid Oxide Fuel Cells A Study on Co and Cu Oxides as Sintering Aids for Sm0.2Ce0.8O1.9 Electrolyte A Mathematical Model of Ultra-Thin Catalyst Layer in PEFC Development and Demonstration of Membrane Reformer System for Highly-Efficient Hydrogen Production from Natural Gas First-Principle Molecular-Dynamics Study of Hydrogen and Aluminium Nanowires in Carbon Nanotubes Sintering of Mixed-Conducting Composites for Hydrogen Membranes from Nanoscale Co-Synthesized Powders Mechanical Strength and Interface Adhesion of a Solid Oxide Fuel Cell with Doped Ceria Electrolyte Studies on Suppression of Hydrogen Evolution Reaction for Zinc/Air Fuel Cell The Development of the Composite Materials for the Bipolar Plate of the Fuel Cell Design of Micro-Structure at Atom Level in Dy Doped CeO2 Solid Electrolytes for Fuel Cell Applications Neutron Incoherent Scattering Measurements on Hydrogen-Charged Zircaloy-4 Beneficial Effects of Boron Addition into -TiAl Alloys Identification of the Chirality and Polarity of Intermetallic Compounds with the Point Groups of 23, 432, 422, and 321 by Electron Diffraction Vacuum Induction Melting and Investment Casting Technologies Tailored to Near-Gamma TiAl Alloys Processing and Mechanical Properties of RuAl-Based Alloys Analysis of the Solidification Microstructure of Multi- Component -TiAl Alloys A Numerical Model for the Description of Massive and Lamellar Microstructure Formation in Gamma-TiAl Cold-Working and Annealing of L10-Ordering Iron-Palladium Base Intermetallics Microstructures and Mechanical Properties of Directionally Solidified Intermetallic Composites Effects of Hf on the Microstructure and Mechanical Properties of TiAl Base Alloys Microstructural Control of Nb-Si Alloy with Invariant Reactions Texture Memory Effect in Heavily Cold-Rolled Ni3Al Single Crystals A Study of Recrystallization and Phase Transitions in Intermetallic Titanium Aluminides by In Situ High-Energy X-Ray Diffraction Influence of Step Aging on Creep Behavior and Microstructural Evolution of Fine-Grained Fully Lamellar XD TiAl Alloys High Temperature Deformation Behavior of Beta-Gamma TiAl Alloy Processing of Gamma-Based TiAl Alloys by Torsional Deformation Microstructure and Creep of -TiAl Containing -Stabilizer Tensile Properties and Creep Behavior of Compositional Modified Orthorhombic Ti2AlNb Alloys Influence of Mechanical Surface Treatments on the Fatigue Performance of the Gamma TiAl Alloy Ti-45Al-9Nb-0.2C Thermo-Mechanical Fatigue Behaviour of the Gamma-Titanium Aluminide TNB-V5 with Near-Gamma Microstructure Microstructure and Hardness of Scandium Trialuminide with Ternary Rare-Earth Additions Deformation and Fracture Analysis of a Duplex -TiAl Alloy during Low Cycle Fatigue Effects of Minor Yttrium Addition on Microstructure, Mechanical Properties and Hot Workability of Nb or V Containing TiAl Alloys Intergranular and Pitting Corrosion Behavior of Fe-25Al-6Cr Intermetallic Compounds Containing Mo, Nb and B High Temperature Strength of Ni-Al-Cr Based Alloys Containing Refractory Elements for Advanced Die Materials Grain Boundary Precipitation and Tensile Ductility of Fe-Mn-Ni Alloys Brazing of AZ31B Magnesium Alloy Sheet Observations on the Thermal Response and Mold Filling Behavior of an AZ91E Magnesium Alloy Cast by the Lost Foam Casting Process Enhancement of Press Formability of Rolled Mg Alloy Sheet by Using Cross Rolling Processes New Phases in the Mg-Al-Sr System Cyclic Deformation Behaviour and Potential Automobile Application of Magnesium Die Casting Alloys AZ91 and AM50 Effect of Initial Grain Size and Strain Path on Grain Refinement in Magnesium Alloy AZ31 Mechanical Joining of Magnesium Components by Means of Inductive Heating - Realization and Capability Selected Aspects of Semisolid Forming Magnesium Alloys Properties of AZ31 and AZ91 Sheets Made by Twin Roll Casting Superior Corrosion Resistance and Mechanical Properties of a Mg Alloy Recycled by Solid-State Process Effect of RE Elements and Ni Contents on the Microstructure and Mechanical Properties of Rapidly Solidified Mg Ribbons Mechanism of Crack Nucleation Analysed by In Situ Observation on Mg-Al-Zn Alloy The Influence of Rolling Parameters on Microstructure and Mechanical Properties of the As-Rolled AZ31 Magnesium Alloy Sheet Corrosion Properties of Supersaturated Magnesium Alloy Systems Mechanical Properties and Damping Behavior of Magnesium Alloys Processed by Equal Channel Angular Pressing Development of Conductive Anodic Oxidation Coatings on AZ91D Magnesium Alloy Effects of Tool Radius on Formability during Forging of AZ80 Magnesium Alloy Wheel Development of a High Strength Mg-Zn-Y-Zr Wrought Alloy Influence of Misch Metal Addition and Deformation Processes on Microstructure and Mechanical Properties in AZ61 Alloy Texture Evolution during Uniaxial Compression of Hot-Rolled AZ31 Mg Alloy Investigation and Application of Excellent Performance Mg Rare Earth Alloys as a Structural Material The Effect of Twinning on Strain Rate Sensitivity during the Compression of Extruded Magnesium Alloy AZ31 Effect of Solidification Grain Refinement on the Development of Wrought Mg Alloys Evolution of Microstructures during Laser Surface Cladding of Magnesium Alloy Castings Using Welding Wire Linking Meso- and Macroscale Simulations: Crystal Plasticity of hcp Metals and Plastic Potentials Microstructure and Mechanical Properties of Mg Alloy Sheets Produced by Twin Roll Caster Press Forging of Magnesium Alloy AZ31 Sheets Effects of Differential Speed Rolling on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Influence of Microstructural Change on Damping Capacity of Mg-X%Li Alloys HRTEM Observation of the Precipitates in Heat-Resistant Mg-Gd-Y-Zr Alloy Effects of Zn and Sn Additions on the Mechanical Properties of Mg-3%Al Alloy Microstructure and Texture Evolution during Large Strain Hot Rolling of AZ31 Mg Alloy Microstructural Characteristics and Creep Properties of Mg-5Al-2Si Alloys Modified with Sn and Sr Effect of Aluminum on the Microstructural Characteristics and High Temperature Properties of Mg-xAl-Zn Alloys Method for Horizontal Continuous Casting of AZ31B Slab Hydrogenation and Degradation Behaviors of Mg-Ni Alloys Evolution of Microstructure of Magnesium Alloy AZ91D Solidified with Low-Voltage Electric Current Pulses Microstructure Evolution of AZ31 Magnesium Alloy during Warm Compression Forming The Microstructure of AZ 31 Magnesium Alloy by Forward Extrusion with Various Extrusion Parameters Integral Foam Molding - A New Process for Foamed Magnesium Castings Preparation and Characterisation of Open-Cell Microporous Nickel Processing of Closed-Cell Magnesium Foams Metal Foam Production Process Using Hydro-Gel and its Improvement Development of Metal Foam for Application of Automotive Part Micromechanical Models of Metallic Sponges with Hollow Struts Mechanical Response of Porous Copper Manufactured by Lost Carbonate Sintering Process New Composite Metal Foams under Compressive Cyclic Loadings Uniaxial Elasto-Plastic Behaviour of Adhesively Bonded Hollow Sphere Structures (HHS): Numerical Simulations and Experiments Cellular Structures under Impact Loading On the Finite Element Simulation of Secondary Operations on Metallic Foams inno.zellmet - A Concerted Approach towards the Application of Non-Foam Type Cellular Metals Fabrication of Lotus-Type Porous Copper-Aluminum Alloy by Unidirectional Solidification in Hydrogen Atmosphere Density-Graded Aluminum Foams by the Corrosion Method Computational Relationship of Deformation Behavior and Materials Strength of Amorphous Alloys to Short-Ranged Local Structures Crystallization Behavior of Al87Ni5La7Zr1 Metallic Glass Soft Magnetic Bulk Glassy Alloy Synthesized by Flux Melting and Water Quenching Thermal and Mechanical Properties of Mg-Cu(Ni)-Y(Gd) Amorphous Alloys Elastic Properties of Cu-Based Bulk Metallic Glass around Glass Transition Temperature Metastable Transition-Metal System Bulk Alloys Prepared by MA and Shock Compression Plastic Deformation Behavior of Bulk Metallic Glass Composite Containing Spherical Ductile Crystalline Precipitates Femtosecond Laser Ablation of Zr55Al10Ni5Cu30 Bulk Metallic Glass EXAFS Study on Atomic Distribution Change during Tensile Deformation of Metallic Glass Local Structures around Zr, Ni and Cu for the Zr67Cu33 and Zr67Ni33 Metallic Glasses Thermal Stability and Nanocrystallization of Amorphous Ti-Ni Alloys Prepared by Cold Rolling and Post-Deformation Annealing Glass Structure Control of Zr-TM-Al (TM: Cu, Ni and Co) BGAs with Small Additive Elements Metastable Solids from Undercooled Melts X-Ray Study of Pd40Cu30Ni10P20 Bulk Metallic Glass Brazing Filler for Ti-6Al-7Nb Alloy Analysis of Optimal Compositions of Ternary Bulk Metallic Glasses with Thermodynamic Quantities Atomistic Analysis of Unstable Deformation in Amorphous Metal Effects of Additional Elements on Microstructures of Zr-Based Metallic Glass Ribbons Anomalous SWAXS Analysis of Zr-Cu-Ni-Al Quaternary Metallic Glass Joints Structure of Glass and Liquid Studied with a Conical Nozzle Levitation and Diffraction Technique Glass Formation Range of Mg-Based Bulk Metallic Alloys Plasticity in Bulk Metallic Glass Composites Containing Dual Amorphous Phases Icosahedral Order in Supercooled Liquids and Glassy Alloys Mechanical Properties of an Amorphous or Partially Crystallized Zirconium Based Metallic Glass Growth and Atomistic Structure Study of Disordered SiGe Mixed Semiconductors Electronic Structure and Phase Stability of Glassy Alloys Room Temperature Plasticity of Zr65Al7.5Ni10Cu17.5-xPdx Bulk Metallic Glasses Relaxation Kinetics of Bulk Metallic Glasses below Glass Transition Temperature Analysis on the Phase Transition Behavior of Bulk Metallic Glass by Electrical Resistivity Measurement Viscosity Measurements of Zr55Cu30Al10Ni5 Supercooled Liquid Alloy under High-Speed Heating Conditions Change of Nanostructure in (Fe0.5Co0.5)72B20Si4Nb4 Metallic Glass on Annealing Formation, Mechanical and Magnetic Properties of (Fe,Co)-B-Si-Nb Bulk Glassy Alloys Superplastic Nanoforging of Pt-Based Metallic Glass with Dies of Zr-BMG and Glassy Carbon Fabricated by Focused Ion Beam Localized Shear Deformation and Fracture in a Zr-Based Bulk Metallic Glass Structure Instability of Metallic Glass Zr50Cu40Al10 in Low Temperature Glass Forming and Thermal Properties of the Mg65Cu25GD10-xNdx (x=0~10) Amorphous Alloys High Temperature Deformation Characteristics of Zr76.11Ti4.20Cu4.51Ni3.16Be1.49Nb10.53 Bulk Metallic Glass Composite Oxidation Behavior of the Y56Al24Co20 Bulk Amorphous Alloy Containing Crystalline Composites at 325-450 DegreesC Development of a Method for Making Interatomic Potential: An Application to Metallic Systems Estimation of Micro-Formability and FEM Simulation of Micro-Forming Process of a Zr-Based Bulk Metallic Glass Intergranular Fatigue Cracking Enhanced by Impurity Segregation Numerical Analysis of Test Methods for Evaluating Shear Strength of Ceramic Composite Joints Using Interface Element Effect of Dispersion of Coherent and Incoherent Precipitates on High-Temperature Deformation of Copper Application of Local Approach to Hydrogen Embrittlement Fracture Evaluation of High Strength Steels Stress Corrosion Cracking Failure of Jackbolts for Die Casting Press Simulation of Ductile Damage in Two-Phase Structural Steel with Meso-Scale Model Fracture Assessment of Wide Plate Component Subjected to Biaxial Loading Ductile Crack Propagation Characteristics in Steel Thin Single Edge Notched Tension Specimens Prediction of Ductile Crack Growth from Ductility of Steel Dynamic Evaluation of Strength-Structure Properties by the Determination of Activation Volume and Mean Slip Distance Microstructure and Mechanical Properties of Commercial Purity Copper Resulting from Repeated Groove Pressing Followed by Cold Rolling Effect of Strength Matching on Ductile Fracture Behavior of X80 Linepipe Girth Welds Subjected to Tensile Loading Evaluation of Mechanical and Fracture Characteristics Using Instrumented Indentation Technique Investigations on Structure and High Temperature Properties of Iridium Microstructure Analysis of Cold Worked Holes Strain Scanning in Australia: Instrumentation and Recent Experiments Temperature Distribution, Phase Transformations and Residual Stresses in Heat Treatment of Grinding Balls Effects of Applied Bias and Dopants on the Photocatalytic Degradation of Aqueous Dye Solution by TiO2/Ti Electrode Physical Simulation of Thermo Mechanical Phenomena to Obtain an Optimal Micro Structure for a Soft Magnetic Fe-Co-Alloy The Developments of Plasticity Processing: 3M Strategy Effect of Dispersoids on Softening Behavior in Cu-Fe-P Alloys for Lead Frames Detection of Crack Propagation in Alumina Using SrAl2O4:(Eu,Dy) Luminescent Paint Dynamic Deformation and High Velocity Impact Behaviors of Ti-6Al-4V Alloys Estimation of Contact Interface between Tool and Workpiece in Cold Forming Using FEM Analysis Neutron Diffraction Profile Analysis to Determine Dislocation Density and Grain Size for Drawn Steel Wires Web-Site Survey of Recent Ecomaterials in Japan Study on a Reactor Design and Catalyst for Hydrogen Generation from Alkaline Solution of Sodium Borohydride Comparison between Eco-Profiles of Innovative Nanoclay and Traditional TBBPA Flame Retardants Improvement of Materials Efficiency for a Sustainable Resource Management Ecomaterials-Foam Plastics Synthesized from Plant Oil-Based Resins Multi-Valent Metal Salt Hydrates as Catalysts for the Esterification of Fatty Acids and Alcohols Beta Zeolites Modified with Lanthanum and Cerium Oxides for the Isomerization of Hexane A New Challenge of Polymer Thermoelectric Materials as Ecomaterials Application of 3-Dimensional Powder Laminating Fabrication to Metallic Components Life-Cycle Evaluation of Ecobalance Performance of Ecomaterial-Type Building Materials by Multiple Eco-Indicator Method Controlling of the Solidification Structure for Recycling by Ultrasonic Vibration 3-Dimensional Characterization of Polycrystalline Bulk Materials Using High-Energy Synchrotron Radiation Three-Dimensional Simulation of Coarsening and Grain Growth in Sintering Modelling of Precipitation Hardening in Alloys: Effective Analytical Submodels for Impingement and Coarsening Determination of Percolation Threshold for Random Boundary Network on the Basis of EBSD/OIM Observations 3-D High-Density Strain Mapping Procedure Based on High-Resolution CT Phase-Field Modeling of the Microstructure Evolutions in Fe-Cu Base Alloys A Thermodynamic Description of the Al-Ir System Free Energy Calculations of Precipitate Nucleation Abnormal Grain Growth Topology and Kinetics Thermodynamic Assessment of the Al-Cr System by Combining the First Principles and CALPHAD Methods Thermodynamic Analysis of Steels by Incorporating First-Principles Calculations into the CALPHAD Approach Modeling of HCP/D019, D019/L10, BCC/B2 Phase Equilibria in a Ti-Al System by the CVM-CALPHAD Method Theoretical Study of Glass Transition Based on Cluster Variation Method Computer Simulation of the Precipitate Evolution during Industrial Heat Treatment of Complex Alloys Computer Simulation of Grain Growth in Three Dimensions by the Phase Field Model with Anisotropic Grain-Boundary Mobilities Phase Transformation Modeling of Medium-Carbon Forging Steel Evolutionary Computing for Metals Properties Modelling Modelling of Dynamic Recrystallisation of 316L Stainless Steel Using a Systems Approach Modelling of Oxide Scale Evolution in Hot Rolling and Descaling Analytical and Computational Models for Investigations of Local Buckling in Honeycomb Sandwiches Kinetic Features of Solid-State Reactive Diffusion between Au and Sn-Base Solder Characterization of the Heat Transfer Boundary Conditions during Cooling of a Horizontal Disk with a Water Column The Influence of Injection-Molding Parameters on the Dimensional Accuracy Identification of Thermal Properties of the System Casting-Mould An Analytic Model for Predicting Roll Force in Billet Rolling Process with Vertical Stands and Horizontal Stands Mounted Finite-Element Modeling of Multi-Pass Forging of Nickel-Base Alloys Using a Multi-Mesh Method Models and Equations for Atomic Transport Coefficients of Liquid Metals: Viscosity and Self-Diffusivity A Study on Development of Forming Roller for Miniature Metal Balls Manufacturing Process Application of the Shape Sensitivity Analysis in Numerical Modelling of Solidification Process Measuring and Modeling Grain, Grain Boundary and Grain Edge Average Curvature and their Application to Grain Growth Using of FEM to Analyse of the Reinforcement Bar Rolling Process Modeling of Generalized Continua on Macroscopic Scales: Towards Computational Mechanics of Microstretch Continua A Multiscale Approach for Composite Materials as Multifield Continua Phase Field Model Simulation of Abnormal Grain Growth by Solid-State Wetting Macro and Macro/Micro Models of Solidification - Numerical Aspects of Process Simulation Kinetics of the Austenite-to-Ferrite Phase Transformation - From the Intrinsic to an Effective Interface Mobility Modelling the Dependence of Uniform Elongation on Grain Size A Coupled-Volume Approach to the Multi-Scale Modelling of Quasi-Brittle Materials A Multi-Scale Model of Martensitic Transformation Induced Plasticity at Finite Strains Multiscale Modelling of Stick-Slip Transition of Rough (Fractal) Surfaces Out of Plane Models for Composite Brickwork-Like Materials Multiscale Modelling of the Mechanical Behaviour of Oriented Semicrystalline Polymers Nonlocal Interface Mechanical Model Structural Models of Progressive Interface Failure under Shear Stresses Multifield Potentials and Derivation of Extremum Principles in Rate Plasticity Consolidation and Mechanical Properties of Gas Atomized Al-Si Powder Powder Injection Molding of Ti6Al4V Alloy Effects of Alloying Elements on the Sintering and Heat Treatment of Elementally Mixed Aluminum Powder Alloys 3D Coupled Thermomechanical Finite Element Analysis of Ultrasonic Consolidation Investigation of Sintering of Spherical Copper Powder by Micro Focus Computed Tomography ( CT) and Synchrotron Tomography Difficulties with Ti-Ni Powder Metallurgy Process and Multi-Stage Sintering Technique for TiNi SMA Prealloyed Cu-Fe Powder Materials Development of Pre-Alloyed Powders for Diamond Tools and their Characteristics Direct Metal Laser Sintering Some Improvements of the Materials and Process Influence of Additives and Hot-Press Sintering on Lipophilic Properties of Silicon Nitride Ceramics Gas Atomization of High Melting Reactive Metals by a Crucible- and Ceramic-Free Technique Investigation on the Densification Mechanism of Warm Compaction Fe3Al Based Alloys Fabricated by Spark Plasma Sintering from Mechanically Activated Powders X-Ray Diffraction Study of Stress in a Magnesium-Hydrogen System Produced by High-Energy Milling of Powders Fracture Behaviors of Niobium Alloys by Hydrogenation and its Application for Fine Powder Fabrication Evolution of Microstructure during Hot Deformation of the PM Molybdenum Alloy TZM Nanotubes Obtained from Mono and Bimetallic Carbides Produced by Mechanical Alloying Preparation of Ti3SiC2 Particulate Reinforced Cu Matrix Composite by Warm Compaction Powder Metallurgy Production of Titanium Nitride by Carbothermic Reduction of the Anatase and Rutile Forms of Titanium Dioxide Effect of Manufacturing Methods on Structure and Properties of the Gradient Tool Materials with the Non-Alloy Steel Matrix Reinforced with the HS6-5-2 Type High-Speed Steel The Phase Evolution of the TiC Cermet Fabricated by Spark Plasma Sintering A Study on the Development of Environment-Friendly Ag-SnO2 Electric Contact Materials through a Powder Metallurgy Formation of Ni57Zr20Ti22Pb1 Amorphous Powders by Mechanical Alloying Microstructure and Thermoelectric Properties of Rapidly Solidified and Hot Pressed N-Type 95% Bi2Te3-5%Bi2Se3 Alloys Fabrication of Micro Porous Aluminum by Powder Sintering Synthesis of Mono-Dispersed Fine Spherical Silver Powders by Chemical Reduction Method Role of Strain Gradient and Dynamic Transformation on the Formation of Nanocrystalline Structure Produced by Severe Plastic Deformation An Effect of High Magnetic Field on Grain Growth in Nanocrystalline Iron Progress and Current Status in Research on Nanostructured Cu-Ag Microcomposites for Conductor Wires Multiscale Molecular Dynamics Simulations of Nanostructured Materials Non-Equilibrium Solute Partitioning and Microstructure Formation in Rapidly Solidified Al-Sm Alloys Deformation Mechanism Map of Nanocrystalline Metallic Materials Effect of Zr-Doped Ceria Catalyst on Carbon Deposition on Ni/YSZ Cermets Enhanced Strength and Ductility at a Cryogenic Temperature in a Nanostructured Ni-Fe Alloy Grain Size Saturation during Severe Plastic Deformation Nanostructuring a Zr-Hf Alloy via Large Strain Rolling Microstructural Characteristics of Cu-Fe-P Alloys Severely Deformed by Accumulative Roll Bonding Process Application of Equal-Channel Angular Pressing to Aluminum and Copper Single Crystals Coarse Second Phase Particle Size Distribution of UFG Al Alloys Processed by Severe Plastic Deformation: Effect on Cavitation during Superplastic Deformation An Alternative Constitutive Equation for Superplasticity Controlling the Thickness Uniformity in Equal Channel Angular Rolling (ECAR) Nanostructured Titanium Based Materials Development and Properties of High Strengthened Carbon Steels Produced by Repetitive Side Extrusion and Heat Treatment Process Corrosion Behavior of Al-7wt% Si-1.5wt% Cu Severely Deformed by Equal-Channel Angular Pressing Grain Refinement in High-Purity -Iron Base Alloys during Thermomechanical Processing Effect of Equal-Channel Angular Pressing (ECAP) on Creep in Aluminium Alloys Study of Ultrafine Grain Structure of a Pipeline Steel Mechanical Properties of Al-5.7wt% Ni Eutectic Alloy Severely Deformed by Equal-Channel Angular Pressing Microstructural Changes in As-Cast 7475 Al Alloy during Warm Sever Forging Structure of Low Cobalt Alloy for Permanent Magnets of Basis System Fe-Cr-Co at Complex Two-Level Loading in Isothermal Conditions Superplasticity of Fine-Grained 20VOL%SiC Whiskers Reinforced 2024 Aluminum Alloy Produced by ECAP with a Rotary Die Superplastic Deformation of a Mg-8% Li Alloy Processed at Room Temperature by ECAP Investigation, Application and Assessment of T122 Heat Resistant Steel Development and Improvement of 9-12%Cr Steels by a Holistic R&D Concept Effect of Non-Metallic Inclusions on Notched Low Cycle Fatigue in P/M IN100 Nickel-Base Superalloy Hot Working of High-Purity Nickel-Niobium Alloys Effect Factors of Internal Stress and Deformation Mechanism for Single Crystal Nickel-Base Superalloys during Creep Effect of Ausageing on the Precipitation Behavior of MX Carbonitride in Modified 9Cr-1Mo Steel Effect of Boron on Microstructure and Creep Deformation Behavior of Tempered Martensitic 9Cr Steel Interaction of Recrystallization and Precipitation during Hot Forming of Alloy 80A Improvement in Creep Strength of Heat-Resistant Ferritic Steel Precipitation-Strengthened by Intermetallic Compound Contribution of Z-Phase Precipitation to Recovery of Martensitic Structure in High Chromium Creep Resistant Steel Two-Phase Microstructures of Gamma+Gamma-Prime Formed by Phase-Separations due to Heat-Treatments of Elastically Constrained Ni-Al-Ti Alloys Novel Concept of Austenitic Heat Resistant Steels Strengthened by Intermetallics On Bainite Transformation Kinetics and Mechanism Change in Morphology of ' of Prior-Crept Single Crystal Nickel-Based Superalloy, CMSX-4, with Simple Aging Role of Transient Creep in -Single Phase Ni-20Mass%Cr Alloy Precipitation of Gamma-Prime and Gamma-Double Prime Coherent Phases in Three-Phase Ni-V-Si Alloys Influence of Prolonged Exposure on the Microstructure and Stress-Rupture Property of a Single Crystal Ni-Base Superalloy Temperature Dependence of Lattice Distortion in Strongly Creep-Deformed Single Crystal Superalloy SC16 Some Behaviors of Phosphorus in Several Typical Superalloys Time Dependence of / ' Lattice Mismatch in Creep-Deformed Single Crystal Superalloy SC16 at 1173 K The Validation of Microstructural Prediction in Nickel Superalloys The Combination of Modeling Techniques to Predict the Service Behaviour of Heat Resistant Alloys Development of New Alloys with Excellent High Temperature Creep Characteristics of 700 DegreesC or More Optimization of Weld Conditions and Alloy Composition for Welding of Single-Crystal Nickel-Based Superalloys Drawbacks to the Application of Long-Term Degradation Tests, with Reference to Metal Dusting of Nickel-Base Alloys at High Temperatures Recrystallization and Grain Growth during Alloy 718 Processing Stress Exponent of Minimum Creep Rate of Single Crystal Nickel-Based Superalloy, CMSX-4, AT 1273K Recent Activities on Directional Solidification at the State Key Laboratory of Solidification Processing Creep Strength Assessment of High Chromium Ferritic Creep Resistant Steels Creep Behavior of Single Crystal Superalloy DD6 at 760 DegreesC and 980 DegreesC Manufacturing and Analysis of Mechanical Properties of Superalloy 718 in Hydraulic Forging Computer Simulation on Formation of Precision Forgings of Titanium Alloy and Superalloy Properties of Boron Fiber Reinforced Aluminum Matrix Composites Fabricated by Pulsed Current Hot Pressing (PCHP) Self-Healing of Creep Cavities by Boron Segregation and Boron Nitride Precipitation Autonomously Developed during High Temperature Use TiNi Shape Memory Alloys for MEMS: Thin Film Deposition, Thermophysical Properties and Laser Micromachining Characteristics Phase Transformation and Microstructures in Ni and Cu Base Ferromagnetic Shape Memory Alloys Effect of Aging on Microstructure and Martensitic Transformation in Ti-Zr-Ni Shape Memory Alloys Functionally Graded Ti-Ni Shape Memory Alloys Mechanical Properties of Fe-Pd Ferromagnetic Shape Memory Alloy Thin Films Prepared by Dual Source DC Sputtering The Effect of Crucible Configuration on Joule and Pinch Effects in EMCC Process of Silicon Fabrication Method for Metallic Closed Cellular Materials Containing Different Materials from that of Cell Walls by SPS Method Characteristics of Ti50-Pd(50-x)-W(x) High Temperature Shape Memory Alloy Equal Channel Angular Extrusion (ECAE) of Ni-Ti Based Shape Memory Alloy Systems Biodegradable Fiber Reinforced Ti Composite Fabricated by Spark Plasma Sintering Method On Cyclical Phase Transformations in Driven Alloy Systems: A Mass-Action Kinetics Approach Ti-Ni Shape Memory Alloy Film Cantilever Actuator for Micro-Probing Intelligent Materials Synthesis Based on Millimeter-Wave Heating and SPS Methods Electrochemical Properties of Type 304 Stainless Steels Produced by Several Methods Effect of Strain Rates on the Transformation Behavior of Ni-Ti Alloy Piezoelectric Composite and its Multilayer Actuator Effect of Magnetic Field on Martensitic Transformation Temperature in Ni2MnGa with Single Variant and Multi-Variant States Recent Advances in Microwave and Millimeter-Wave Processing of Materials Pitting Corrosion Behavior of Sintered SUS444 Stainless Steel in MgCl2 Solution Enlarging the Temperature Range for Maximum Wear Resistance of TiNi Alloy Using a NTE Phase Magnetic Field-Induced Martensitic Transformation of Heusler-Type Ni2MnGa System High-Temperature Shape Memory Effect of Ti-(Pt,Ir) Effects of Fiber-Resin Interface Property on Shape Recovery and Mechanical Properties of Denture-Base-Resin Matrix Smart Composite Preparation of Fe2VAl Thermoelectric Module by RF Sputtering Molecular and Nanometer-Scale Self-Organized System Generated by Protein Motor Functions Nitrogen Ion Beam Irradiation on Amorphous Carbon Study on the Magnetic Properties and Domain Structure of NdFeNbZrB Nanocomposite Permanent Magnets Thermoelectric Properties of Arc-Melted Ba8Al16Si30 Clathrate Shape Memory Characteristics of Ti-Ni Alloy Using Mechanically-Alloyed Powder The Effects of Geometrical Factors on the Step-Up Ratio in Piezoelectric Transformer Effect of Aging and Microstructure on Mechanical Rolling CuAlNi Shape Memory Alloy Stored Energy and Recrystallization Process On the Effect of Texture in Experimental Grades of High-Silicon Electrical Steel Texture and Orientation Relationships in Phosphorus Added TRIP Steels Effect of Texture on Anisotropic Creep of Pressurized Zr-2.5Nb Tubes Texture of AZ31 Magnesium Alloy Sheet Heavily Rolled by High Speed Warm Rolling A Comparison of Grain Boundary Engineering Mechanisms in Copper and Brass New Grain Interaction Models for Deformation Texture Simulations Texture and Creep Anisotropy in Zirconium Alloys Modeling Compression and Tension Reloads in Copper Prestrained by Rolling Grain Boundary Engineering: Progress and Challenges Texture and Grain Boundary Character Modification of Metallic Materials by Electromagnetic Processing Deformation Conditions and Stability of the Basal Texture in Magnesium Twinning and Detwinning during Cyclic Deformation of Mg Alloy AZ31B Website Publication of Calculation Computer Program and Visualized Pieces both of Bcc and Fcc Pencil Glide Theory for Deformation Texture Improvement in Specific Electric Resistance of Bi1.5Pb0.5Sr1.7Y0.5Co2O9- by Texture Development Application of Asymmetric Rolling to Texture Control of Silicon Steel Microstructure and Texture Evolution during Annealing after Temper Rolling of a 2 wt.-% Silicon Electric Steel Texture and Microstructure of Cold Rolled and Recrystallized Pure Niobium Texture Evolution during Diffusional Heat Treatment from Roll-Bonded Ti/Ni Laminates to TiNi Shape Memory Alloy Sheets Experimental and Numerical Investigation of Texture Development during Hot Rolling of Magnesium Alloy AZ31 Multiscale Modelling of Plastic Deformation of Polycrystals: Implementation of Texture-Based Anisotropy in Engineering Applications (FE Codes for Forming, Prediction of Forming Limit Curves) Texture Development in Polycrystalline Fe-Ga Magnetostrictive Materials Study of Deformation Texture of Equal-Channel Angular Pressed CP-Titanium Evolution of Texture in a Ti-IF Steel during Warm Rolling and Cold Rolling Effects of Electric Field Annealing on Recrystallization Texture and Plastic Strain Ratio (r-Value) of IF Steel Sheet Bond-Orientational Ordering in Cyclohexyl-Biphenyl Type Liquid Crystals Synthesis of Carbon Nanotubes and its Applications in Composites and Field Emission Light Sputtered Cu Films Containing Various Insoluble Substances for Advanced Barrierless Metallization Behavior of Oxide Film in Transient-Liquid-Phase Bonding of Tin with Filler of Bismuth Film Microstructure and Gas Sensing Property of Porous SnO2 Sputtered Films Luminance Characterization of La3Ga5SiO14 Thin Films by Sputtering Deposition Effect of Film Thickness and Annealing Temperature in Stress-Induced Damage in Metal Films Self-Assembly of Nano-Sized Arrays on Highly Oriented Thin Films of Poly(tetrafluoroethylene) Atomic Assembly of Thin Film Materials Measuremet of Mechanical Properties of Thin Films and Nanostructured Materials at High Spatial Resolution The Role of Segregation in InGaAs Heteroepitaxy Molecular Dynamics Simulation on Formation of Icosahedron and Coalescence of Pt Nanoclusters Hydrogen Measurements in SiNx: H/Si Thin Films by ERDA Effect of DC Bias Voltage on the Optical Properties of TiO2 Thin Film Deposited by Plasma Assisted Electron Beam Evaporation Fabrication of Sputtered TiO2-XNX Photocatalyst Using Spark Plasma Sintered Targets In Situ Scanning Electron Microscopy Observation of the Pattern Formation on the Surface of Al/Ge Bilayer Films Substrate Effect on the Diamond-Like Carbon Films Synthesized by RF Plasma Enhanced Chemical Vapor Deposition Embossing on Epoxy Thermoset Polymer Using SiO2 Coated Nickel Template Microstructure and Texture in an Alpha/Beta Titanium Alloy and their Impact on Mechanical Response Ageing of C-Containing and C-Free Ti-15Cr and Ti-15-3 Melting and Casting of Titanium Alloys Constitutive Analysis of the High-Temperature Deformation Behavior of Single Phase -Ti and + Ti-6Al-4V Alloy The Effect of Oxygen on Heat Treatment Behavior of Titanium-50mass%Tantalum-5mass%Zirconium Alloy Temperature and Strain Rate Effects on Plastic Deformation of Titanium Alloys Beta Phase Decomposition in a TiAl Alloy during Continuous Cooling Production of Functionally-Graded Samples Using Simultaneous Powder and Wire-Feed An Experimental and Modelling Study of Laser Fabricated Samples New Process-Microstructure Method for Affordable 2024 Series Aerospace Aluminum Alloys Effect of Surface Oxide Films on Degradation of Titanium Optimization of the Equal Channel Angular Pressing (ECAP) Process for Strain Homogeneity A Physically Based Flow Rule for the Simulation of Ti-6Al-4V Forging in the - Range Micro Metal Injection Molding Process for High Performance Titanium Alloy Colloidal Photonic Crystals Using Space -An Academic-Industrial Collaboration- Oxidation Effects during High Temperature Deformation of CP Ti Alloy On the Nature of the Growth of Bainitic plates in Metastable Ti Alloys Microstructure and Mechanical Properties of an Advanced Niobium Based Ultrahigh Temperature Alloy Prediction of Flow Stress in Ti-6Al-4V Alloy with Hydrogen at High Temperature Using Artificial Neural Network Study on a Damage Tolerant Titanium Alloy Microstructures and Cohesiveness of Alkali- and Heat-Treated Films on a Ti-15Zr-4Nb-4Ta Alloy Characterisation of the Phase Transformations in a Metastable Titanium Alloy Friction Stir Processing of Cast NiAl Bronze Metallurgical and Mechanical Properties of Friction Stir Welded Ultra Fine Grained Steel Local Manufacture of MMC Using FSW Microstructural Evolution of Cast Mg-Al-Ca Alloy during Friction Stir Processing Microstructure Evolution and Microstructure-Property Relationships in Friction Stir Processing of NiAl Bronze Tensile and Fatigue Properties of Friction Stir Processed NiAl Bronze Microstructure of Friction-Stir-Welded High-Nitrogen Stainless Steel Friction Stir Welding of Precipitation Hardened Ni Based Alloys Control of Grain Size and Texture in Al Alloys Utilizing Friction Stir Processing Enhancement of Formability in Magnesium Alloy AZ31B via Friction Stir Processing Evaluation of Post-Weld Heat Treatments to Restore the Corrosion Resistance of Friction Stir Welded Aluminum Alloy 7075-T73 vs. 7075-T6 Relation between Strength and Microstructure in Friction Stir Welded Joints of A383 and A5052 Aluminum Alloys Residual Strain Measurements in a Friction-Stir Processed AZ31B Magnesium Alloy Using Neutron Diffraction Experimental Thermal Analysis of Friction Stir Processing Controlled Plasticity Burnishing to Improve the Performance of Friction Stir Processed Ni-Al Bronze Microstructural Evolution and Performance of Friction Stir Welded Aluminum Matrix Composites Reinforced by SiC Particles In Situ Observation of Weld Solidification and Phase Transformation Process Using Synchrotron Radiation Transient Local Melting in Al 7075-T6 Friction Stir Spot Welds A Thermo-Fluid Analysis of the Friction Stir Welding Process Friction Stir Welding of Mg-14mass%Li Alloy Friction and Wear of Laser Irradiated Amorphous Metals Influence of Contineous Transversal Inclination of Tool on FSW Joints Solid State Welding between CPTi and AZ31B Magnesium Alloy by Friction Stirring Formation of Intermetallic Compounds in Friction Bonding of Al Alloys to Steel Use of Synergistic Effects in High Power Laser-GMA Hybrid Welding for Manufacturing of Thick Walled Structural Pipes The Oscillation Behaviour of Liquid Metal in Arc Welding Microstructure of SiC/Cu Interface by Pulsed Electric-Current Bonding Influence of Alloying Elements on Interfacial Reaction and Strength of Aluminum/Steel Dissimilar Joints for Light Weight Car Body Crystallographic Texture of Dissimilar Laser Welded Al5083-Al6013 Sheets Precise Resistance Welding with Wire Insert Effects of Nitrogen on Weld Metal Microstructure and Toughness in Submerged Arc Welding Repair Welding of Irradiated Reactor Vessel Steel by Low Heat Input GTAW and LBW Ultrasonic Friction Power in Microelectronic Wire Bonding A CO2 Gas Shielded Gas Tungsten Arc and its Application to Welding of Steel Sheets Anodic Bonding of Ag-Impregnated Glass and Reaction of Derived Joints to Reverse Voltage Microstructure and Properties of High Strength Weld Metals Advancement in Prediction and Control of Welding Residual Stress and Distortion Joining by Forming with a Flat Counter Tool - A New Way of Joining Magnesium Components Braze Pressure Welding (BPW) - A New Method for Joining Steel Pipes - A Study on Fatigue Strength Improvement of Aluminum Alloy Resistant Spot Welds by Cold Working Characteristics of Nd:YAG Laser Welded 600MPa Grade TRIP and DP Steels Modeling of Molten Drop Oscillation in Gas Shielded Metal Arc Welding Micro Flash Welding of Super Duplex Stainless Steels Electron Beam Welding of Crack Sensitive Nickel Super Alloy MAR-M-002 Laser Hybrid Welding in Stainless Steels and in High Strength Steels Visual Information Acquirement and Real-Time Control Methodologies for Weld Pool Dynamics during Pulsed GTAW Modeling of Steel Weld Microstructure Using Monte Carlo and Finite Difference Hybrid Method Selection and Design of Brazing Fillers for Metal-Ceramic Joints Steel-to-Aluminum Joining by Control of Interface Microstructures - Laser-Roll Bonding and Magnetic Pulse Welding - Abnormal Tin Whisker Growth in Rare Earth Element-Doped Sn3Ag0.5CuXCe Solder Joints FE Modelling of Mechanical Tensioning for Controlling Residual Stresses in Friction Stir Welds Brazing of CP-Titanium / CP-Titanium and Titanium Alloy / Stainless Steel with Laminated Ti-Based Filler Metal Liquation Cracking in Aluminum Welds The Investigation of Diffusion Welding Process and Interfacial Microstructure and Properties on TiCN/Ni Microstructure of Brazing Joint of Silicon Nitride / 40CrMo Steel Laser Brazing Phenomena of Heat-Resistant Alloys with Precious Brazing Filler Metals Laser Grooving and Welding of Cracks Occuring at Dies for Die Casting Minimization of Heat-Affected Zone Size in Welded Ultra-Fine Grained Steel under Cooling by Liquid Nitrogen during Laser Welding Insulated Rail Joints for Signalling Applications Development of Al/Cu Dissimilar Brazing Joint Controlled Form of Intermetallic Compound Micro-Resistance Spot Welding of Nickel Free Austenitic Stainless Steel Grain Growth Behavior and Mechanical Properties of the Friction Stir Welded Zone of 7055 Al Alloy Followed by Post Weld Heat Treatment Welding Phenomena in Hybrid Laser-Rotating Arc Welding Process Analysis of the Welding Materials by OPA Technique Effects of Chemical Compositions of Welding Rods on J-R Fracture Resistances and Tensile Properties of Type 347 Welds Surface Hot-Shortness of Steels Induced by a Small Amount of Copper and Tin from Scrap Steels and its Suppression Methods Evaluation of Physical Parameters in Modelling Softening-Precipitation Interaction in Hot Worked Nb Microalloyed Austenite Microstructure Characteristic and Strengthening Mechanism of Ti-Microalloyed Automobile Beam Steel Produced by Compact Strip Production Tailored Solutions in Microalloyed Engineering Steels for the Power Transmission Industry Study of Laboratorial Simulation of V-N Microalloyed CSP Steel Modeling of Microstructural Gradients in TMCP Bars to Produce Value Added Products Physical Simulation of Thin Slab Continuous Casting Experimental Studies into Strip Casting of Steel Effect of Dislocations on Precipitation of Nb-C in -Fe The Effects of Nb Carbo-Nitride Precipitation Conditions on Abnormal Grain Growth in Nb Added Steels Deformation Banding and the Role of Transition Bands between -Fibre Components on Recrystallization in Low Carbon Steels Studied by EBSD Nitriding Behavior and Strengthening Mechanism of Ti Added Steels Effect of Heat Treatment on the Structure and Morphology of Amorphous Steel Produced Using Spray Metal Forming NbC Precipitation Kinetics during and after / Transformation of a Nb Microalloyed Steel Precipitation of Niobium Carbonitrides: Chemical Composition Measurements and Modeling Constitutive Modeling of Stress-Strain Curves of IF Austenite Effect of the Annealing Conditions on the Microstructure and Mechanical Properties of a 0.04% C Al Killed Steel Effect of Cr on Strain Ageing Behaviour of Low Carbon Steel Study of the Development of Heterogeneous Grain Size in the Through-Thickness Direction of Hot Rolled ELC Steels Metal Dusting and Oxidation at 593 and 704 DegreesC A Physically Based Model for Bake-Hardening Steels and Dent Resistance Development of Low Carbon Boron Steel for Wire Drawing High-Temperature Phase Transitions and Mechanical Properties in Steel of Peritectic Composition Mechanism of Hydrogen Embrittlement of Austenitic Steels Microstructural Development in Bearing Steel during Rolling Contact Fatigue Niobium in Microalloyed Structural and Engineering Steels Study on the Formation of Ferrite-Cementite Microstructure by Strain Induced Dynamic Transformation in Medium Carbon Steels Determination of Inclusions of Boron and Titanium in Steel by Original Position Statistic Distribution Analysis Technique Influence of Continuous Annealing Parameters on the Mechanical Properties of Cold Rolled Ultra High Strength Steels Characterization of Metallurgical Transformations in Multi-Phase High Strength Steels by Barkhausen Noise Measurement Methods of Tinplate Imperfection Analyses Thixoforming of Steels - A Status Report Role of Manganese and Chromium on the Segregation Kinetics of Carbon and Nitrogen to the Dislocations in Ferritic Steels Microstructure and Mechanical Properties of Ausformed Ultra High-Strength TRIP-Aided Steels Effect of Initial Processing on the Microstructure-Property Relationships in Bake-Hardened C-Mn-Si TRIP Steels Size Distribution of Retained Austenite in Phosphorus-Containing TRIP Steels Low-Carbon Manganese TRIP Steels On the Phase Transformations in Hot Rolled TRIP-Assisted Multiphase Steels Modelling the Transformations Kinetics from Work-Hardened Austenite in a TRIP Steel Development of Seamless Pipes with Improved Strength-Toughness Combination for Hydraulic Cylinders Crystallography and Mechanical Properties of Ultrafine TRIP-Aided Multi-Phase Steels Effects of Thermomechanical Processing on Microstructure and Mechanical Properties Multiphase Steels Exhibiting a TRIP Effect Formation of Microstructure and Texture in Intercritically Rolled C-Mn Steel State-of-Art High Strength Steel Sheets for the Automotive Application Effect of Processing Route on Mechanical Behavior of C-Mn Multiphase High Strength Cold Rolled Steel Steel Sheets Mechanical Properties Improvement Advanced High Strength Steels for Automobile Body Structures Microstructure Model for a Dual-Phase Steel Historical Aspects of Thermomechanical Processing for Steels Innovative Annealing Techniques for the Production of Advanced High Strength Steels Effect of Niobium on Zn-Coated Dual Phase Steel Sheet Mechanical Properties in Ultrahigh Strength Secondary Hardening Steels Bearing Co and Ni Workability and Straining Behaviour of High Silicon Steels (3.0-6.3%Si) by Hot Torsion and RT Compression Tests Effect of Aluminum and Titanium Content on Grain Growth, Texture and Magnetic Properties in 3%Si Non-Oriented Electrical Steel Creep Property Evaluation of Heat-Resistant Steels by Small Punch Creep Test Saw Welded Joints of Two API Steels Subject to SCC Laboratory Testing Original Position Statistic Distribution Analysis (OPA)-Novel Statistic Characterization Method of Different Chemical Compositions and its States of the Materials Effects of Heat Treatment and Composition Modification on SAE 8620 Steels Static Recrystallization of Tool Steels Retained Austenite - Residual Stress - Distortion Relationships in Carburized SAE 6820 Steel Advanced Material and Processing for the High Temperature Carburising of Microalloyed Case Hardening Steels Quenching and Partitioning of Ni-Added High Strength Steels The Characterisation of Oxide Scales Grown on Nickel Containing Steel Substrates Using Electron Backscatter Diffraction Comparison between Charpy Transition Temperature TCVN and Reference Temperature T Degrees for 10Ni3CrMoV Steel The Development of New-Typed Air-Cooled Mn-Series Bainitic Steels The Development of Ultra-Fine High Performance Low Carbon Bainitic Structural Steel Study on Corrosion Fatigue Behavior of a High Strength Steel with Carbide Free Bainite/Martensite Duplex-Phase Structure Martensitic Structural Steels for Increased Strength and Wear Resistance Intermediate Transformation Structure and Control Cooling Process in Low Carbon Bainitic Steel Optimized Thermomechanical Treatment for Strong and Ductile Martensitic Steels Study of Ultra-Long Life Fatigue of High Strength Steel with Duplex-Phase of Carbide-Free Bainite and Martensite Effect of Manufacturing Conditions on Toughness in the Middle Carbon Martensitic Steels Produced by the Reheat - Quenching Process On the Formation of a Non-Traditional Pearlite Morphology Graphitization Behavior of a Spray Formed Ultra High Carbon Steel during Hot Rolling Recrystallization and Spheroidization Behavior of High Carbon Pearlitic Steels Investigated by Means of Orientation Imaging Microscopy Refinement of Sub-Grain and Enhancement of Impact Energy Absorption for Ultra-High Strength Bainitic Steel The Ultra-Fine Bainitic Steels and Refinement Technology The Effect of Plastic Deformation on the Formation of Different Morphologies of Ferrite upon Cooling Three-Dimensional Observation and Growth Kinetics of Proeutectoid Ferrite Formed at Austenite Grain Boundary in a Low Carbon Microalloyed Steel Modeling the Effect of Austenite Grain Size Distribution on Austenite Decomposition Kinetics Modeling Austenite-to-Ferrite Transformation Kinetics in Low-Carbon Manganese Steels during Continous Cooling Effect of Micro-Segregation on Phase Transformation and Residual Stress Simulation of the Process of Hot Rolling of Seamless Tubes A Phase Transformation Model for the Austenitisation of Martensite in Dual-Phase Steel An EBSD Study of Orientation Relationships during Phase Transformations in Ultra High Performance Steels Effect of Hot Deformation and Cooling Rate on Phase Transformations in Low Carbon HN5MVNb Bainitic Steel Transformation Behavior of Supercooled Austenite during Hot Deformation of Plain Medium Carbon Steel within ( + ) 2-Phase Field at a Low Strain Rate Effect of Annealing Time on Microstructural Evolution and Corresponding Mechanical Properties of Cold Drawn Pearlitic Steel Wires Austenite Formation in C35 and C45 Alloys Cold Workability and Magnetic Properties of 6% Si Steel Interactions between Recrystallisation and Phase Transformations during Annealing of Cold Rolled Nb-Added TRIP-Aided Steels Influence of Magnetic Field on the Mechanical Properties of Austempered Ductile Iron (ADI) Gas Quenching with Controllable Heat Extraction Morphological Evolutions in Steels during Continuous Rapid Heating Weldability of Ultra-Fine Grained Atmospheric Corrosion Resistant Steel Stress- and Strain Induced Phase Transformations in Pearlitic Steels Nanocrystallization of Bulk Steels through / Transformation Equal Channel Angular Pressing in a Pearlitic Structured Steel Ultrafine Grained Steels due to Super Short Interval Multi-Pass Rolling in Stable Austenite Region Influence of Deformation Parameters on Deformation Induced Ferrite Transformation (DIFT) in Plain Low Carbon Steel Effect of Ultra-Fast Cooling after Rolling in Stable Austenite Region on Grain Refinement of C-Mn Steel Work Hardening in a Fine Grained Austenitic Stainless Steel Refinement of Cementite in High Strength Steel Plates by Rapid Heating and Tempering Prospects and State of the Art of TMCP Steel Plates for Structural and Linepipe Applications Transformation and Precipitation Behavior in the New Conceptual TMCP Process Utilizing Heat Treatment On-Line Process Inner Crack Heat-Healing in Low Carbon Steel with Lanthanum Steels with Ferrite-Bainite Microstructure with Improved Weldability and Cold Resistance for Main Pipelines Microstructure and Properties of Pipeline Steel with Acicular Ferrite Development of Modern Heavy Plate Steels for Pipelines Grain Scale Assessment of Variant Selection in a Thermomechanically Processed TRIP Steel Diffusion-Controlled Phase Transformation under High Magnetic Field in Medium and High Carbon Steels Rust Layer Structure and Corrosion Resistance of High Strength Microalloyed Steels Effect of Carbon on Work Hardening Behavior of 18%Ni Martensitic Steel Nano-Carbides and the Strength of Steels as Assessed by Electrical Resistivity Studies Modeling of Microstructure Evolution of Athermal Transformation of Lath Martensite The Ultrahigh Ductility of an Ultrahigh Carbon Steel Containing 3%Si Ultra Rapid Softening of High Strength Structural Steels by Thermomechanical Treatment Coarsening Behavior of Nanometer-Sized Carbides in Hot-Rolled High Strength Sheet Steel Microstructural Features of 'Quenching and Partitioning': A New Martensitic Steel Heat Treatment Thermomechanical Treatments of Ultrahigh Carbon Steels and Optimal Microstructures to Improve Toughness Substructure and Crystallography of Degenerate Pearlite in an Fe-C Binary Alloy Effect of Niobium on HAZ Microstructure and Toughness of HSLA Steels Mechanical and Thermal Properties of Ultra-High Carbon Steel Containing Aluminum Advanced Technology of Automotive Connecting Rod Development of Anti-Coarsening Steel for Carburizing Evaluation of Damping Property of Aluminum-Alloyed Cast Iron by Several Methods Analysis of Spherical Carbides Formed in Chromium Added Hypereutectoid Bearing Steels Processing of Submicron Grained Microstructures and Enhanced Mechanical Properties by Cold-Rolling and Reversion Annealing of Metastable Austenitic Stainless Steels Intragranularly Nucleated Austenite in a 2205 Duplex Stainless Steel Retardation of 20%Cr Steel Oxidation with Laves Phase Precipitation Static Strain Aging in Cold Rolled Metastable Austenitic Stainless Steels Effects of Si on Oxidation Behaviors in Cr-Mn-Ni Austenitic Stainless Steels TRIP Effect and Deformation Damaging of Metastable Austenitic Steels Effects of Drawing Strain and Annealing on the Mechanical Properties for Heavily Cold Drawn Hyper-Eutectoid Steel Wires Effect of Precipitation on Cryogenic Toughness in N-Containing Austenitic Stainless Steels Prediction of Properties in Type 347 Austenitic Stainless Steel after Long-Term Service at High Temperatures Texture Evolution of Ferritic (AlSl 430) Stainless Steel Strips during Cold Rolling, Annealing and Drawing The Strain-Independence of Interpass Softening during the Hot Compression of 304 H Stainless Steel Electron Beam Freeform Fabrication on Stainless Steel Thermal Fatigue Characteristics of Heat-Resisting Stainless Steel for Automotive Exhaust Decomposition of Austenite in Fe-25Cr-1N Alloy Produced by Solution Nitriding Stainless Austenitic CrMnCN Steels of Superior Strength Part I: Alloy Design and Properties Grain Boundary Engineering of High-Nitrogen Austenitic Stainless Steel The Individual and Cumulative Effect of C and N on the Hardening and Structure of High-Nitrogen Hot Plastic Worked Steels Properties of Low Carbon High Nitrogen Martensitic Stainless Steels Influence of the Shot Peening Process on the Fatigue Behaviour of Duplex Stainless Steel Reinforcing Bars N--H Interaction in Nitrided Fe--Nb Alloys Atomic Interactions in Stainless Austenitic CrMn Steels Alloyed with C, N or (C+N) Processing and Property of Net-Shaped Fe-Based Nanoparticulate Material Nanoscale Behaviour of Certain Materials/Surfaces Structural Change during Cold Rolling of Electrodeposited Copper Diffusion Properties of Internal Interfaces in Bulk Nanocrystalline Materials: Radiotracer Investigation Hydrogen Sensing Characteristics of High Electron Mobility Transistor with a Catalytic Pd Metal Effect of Crystalline Phase on Dynamic Deformation Properties of Zr-Based BMG Alloys Thermal Flow Simulation and Concave Type Slot Nozzle Design for Twin Roll Casting of Magnesium Alloy AZ31

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA81772036
• ISBN:
  • 9780878494286
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Zurich
• ページ数/冊数: 5 v.
• 大きさ: 25 cm
• 分類:
  • DC22 : 620.11
• 件名:
  • LCSH : Materials -- Congresses
  • FREE : Advanced materials
  • FREE : THERMEC
  • FREE : Processing
  • FREE : Manufacturing
• 親書誌ID:
  • BA00294222