Engineering plasticity and its applications from nanoscale to macroscale : proceedings of the 8th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2006), 25-29 September 2006, Nagoya University, Nagoya, Japan

著者

• Asia-Pacific Symposium on Engineering Plasticity and its Applications
• 大野, 信忠 オオノ, ノブタダ
• 上原, 拓也 ウエハラ, タクヤ

書誌事項

Engineering plasticity and its applications from nanoscale to macroscale : proceedings of the 8th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2006), 25-29 September 2006, Nagoya University, Nagoya, Japan

edited by N. Ohno and T. Uehara

（Key engineering materials, v. 340-341）

Trans Tech, c2007

• : set
• pt. 1
• pt. 2

タイトル別名

The proceedings of AEPA2006

The proceedings of AEPA 2006

注記

Includes bibliographical references and indexes

"This proceedings contains 240 papers which were presented in oral and poster sessions at AEPA2006."--preface

The symposium was organized by The AEPA2006 Organizing Committee in collaboration with The Japan Society of Mechanical Engineers ... [et al.]

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This edited collection of 240 peer-reviewed articles covers a broad range of topics dealing with plasticity in various materials, such as metals, composites, polymers, foams, soils, and rocks at the nano-, micro- and macro-scales. These informative papers will bring the reader fully up-to-date with the latest research efforts advancing on a broad range of fronts in engineering plasticity

目次

An Internal Variable Approach to Inelastic Deformation Including Structural Superplasticity Mechanics of Carbon Nanotubes: A Continuum Theory Based on Interatomic Potentials Plasticity-Related Microstructure-Property Relations for Materials Design Discrete Dislocation Modeling of Plastic Flow Processes Nanoindentation-Induced Collective Dislocation Behavior and Nanoplasticity Analyses of Cavitation Instabilities in Ductile Metals The Effect of Heating Rate on the Formability of Bulk Metallic Glass in a Supercooled Liquid Region Investigation of the Dynamic Buckling in the Carbon Nanotube under Impact Torque Deformation Behavior of Dual-Phase LTSP Ti3Al Based Alloy Evaluation of Adhesive Properties of Arc PVD Coatings on Non-Nitrided and Nitrided Various Substrates Mechanical Alloying of Ti-Al-Si-C Powders, their Thermal Stability, Phase Evolution, and Synthesis and Deformation of In Situ Produced Titanium Aluminide Composites High Temperature Deformation Behaviour of a New Magnesium Alloy Micromechanical Study on High-Temperature Behavior of ZrO2 Particle-Dispersed Ni Composites Evaluation of Strain Concentration in Carbon Nanotube with Bend Junction High Strain Rate Deformation Behavior of Mg-Al-Zn Alloys at Elevated Temperatures Mechanical Properties of Bulk Glassy Metal after Deformation under High Temperature Conditions Effects of Strain Rate and Temperature on Yield Locus for AZ31 Magnesium Alloy Sheet Elastoplastic Behavior of Particle Reinforced Composites Considering the Effect of Interfacial Debonding Inelastic Behaviour of Concrete/Steel Composite Beam in Fire Possible Approaches in Modelling Rearrangement in a Microstructured Material Proposal of Various Connecting Methods of Fiber Strands and Finite Element Method Analysis of Strength Rate-Dependent Off-Axis Tensile Behavior of Cross-Ply CFRP Laminates at Elevated Temperature and Simulation Using a Viscoplasticity Model Effects of Stacking Sequence on Notched Strengths of Cross-Ply CFRP Laminates and Analysis Using a Cohesive Zone Model A Modified Kinematic-Hardening Viscoplasticity Model for Off-Axis Creep Behavior of Unidirectional CFRPs at High Temperature Evaluation of the Interfacial Properties in Polymer Matrix Composite: Experiments and Elasto-Plastic Shear-Lag Analysis Higher-Order Stress due to Self Energy of Geometrically Necessary Dislocations Forming Limits Prediction of FCC Sheet Metal Adopting Crystal Plasticity High Density Bands of GN Dislocations Formed by Multi Body Interaction in Compatible Type Multi Crystal Models Dependence of Localized Deformation on Point Defect Development Caused by Intersected Cross Slip among Dislocations Crystal Plasticity Analysis of Dislocation Accumulation in ULSI Cells with Consideration of Temperature Dependence of the Lattice Friction Stress for Silicon Multiscale Modeling and Simulation of Crystal Plasticity Based on Dislocation Patterning in Polycrystal Effects of Crystallographic Texture on Plastic Flow Localization New Physical Interpretation of Incompatibility and Application to Dislocation Substructure Evolution Inspection and Model Experiment of a Damaged Arch Bridge Destructive and Ultrasonic Investigations of Damage Development in Metallic Materials Continuum Damage Model of Creep-Fatigue Interaction in Ni-Base Superalloy Elastic-Plastic Deformation of Perforated Sheets with Randomly Distributed Holes Tensile Mechanical Properties of AM50A Alloy by Hopkinson Bar Dynamic Tensile Characteristics of TRIP-Type and DP-Type Sheets for an Auto-Body Elastic-Plastic Dynamic Response of the Tube with Free Boundary Condition Subjected to Impact Counterintuitive Dynamic Behavior in Elastic-Plastic Structures Evaluation of Dynamic Behaviors and Damage Mechanism of Ancient Timber Architectures The Effect of Strain Rate on the Material Characteristics of Nickel-Based Superalloy Inconel 718 A Dynamic Damage Model for Uniaxial Compressive Response of AD90 Alumina Three Modes of Penetration Mechanisms of A3 Steel Cylindrical Projectiles Impact onto 45 Steel Plates On Dynamical Systems at the Portevin-Le Chatelier Effect Periodic Motions and Bifurcations of a Plastic Impact Machine Improvement of Measurement Accuracy of Non-Coaxial Hopkinson Bar Method Deformation and Failure Behaviors of PC/ABS (50/50) Blends under Impact Finite Element Analysis of Alternate Hard and Soft Multi-Layers under Circumscription Loading Development of Stereolithography Simulation Process Based on the Dynamic Finite Element Method The Elasto-Plastic and Geometrically Nonlinear Finite Element Model of Space Beam Considering Restraint Torsion An Elasto-Plastic Finite Element Simulation of the UO-Tube Processes of Sheet Metal Solid Shell Element and its Application in Roll Forming Simulation 3-D Finite Element Simulation of Pulsating T-Shape Hydroforming of Tubes Automatic Approach on Derivation of Loading Path Using Adaptive Finite Element Analysis Simulation Method Three-Dimensional Numerical Manifold Method Based on Hexahedron Element with Full First-Order Cover Function and its Application in Underground Excavation Development of PC Cluster Parallel Processing Scheme of 3-D Rigid-Plastic Finite Element Method Using Diagonal Matrix Numerical Investigation of Flexural Properties of Sheet Metals Subjected to Embossing and Restoration Process Dynamic Indentation and Penetration Properties of Aluminium Foams The Dependence of the Energy-Absorption Capacity of Metal Hollow Sphere Materials on their Relative Density Dynamic Mechanical Behaviors of Aluminium Foam Filled Circular Tubes under Transverse Compressive Load Constitutive Relation of Open-Celled Metal Foams Based on the Mesoscopic Behavior of Random Cells Development of 3-Dimensional Compression Device and its Application to Clarification of Densification Behavior of Urethane-Foam Compressive Properties of Porous Metals with Homogeneous Pore Characteristics Modeling of Fretting Wear Based on Cumulative Plastic Strain and Saturated Shear Stress A Gray Prediction Model for Unequal-Interval Time Sequence and its Application in Creep Fracture Mechanics Estimation of Hysteretic Energy of MDOF Structures Based on Equivalent SDOF Systems The Static and Dynamic Fracture Test of X70 Pipeline Steel Fracture Parameters on Three-Dimensional Sliding Mode Fracture Interfacial Cracks of Antiplane Sliding Mode between Usual Elastic Materials and Quasicrystals Combined Adaptive Finite Element Method and J-Domain Integral Technique for Crack Problems Investigation on a Mn-Ti High Strength Steel Mechanics Analysis on Bar Cutting Based on High Speed and Restrained State Fracture Properties of Softwood under Mode I Loading Perpendicular to the Grain A Study on the Application Infrared Thermography Camera for the 7FA Gas Turbine Blade Covering Crack Detecting Effect of Pitting Corrosion on Ultimate Strength of Web Plates Subjected to Shear Loading Optimum Performance of High Tension Steel Sheets under Various Heat Treatment Process Increase of Stress Intensity near Free-Edge of Elastic-Creeping Bi-Material Interface under a Sustained Load Influence of Tensile Pre-Strain on the Torsional Fatigue Crack Behaviors of a Structural Steel Characteristics of Complementary Plastic Energy Produced by Hysteresis Curves and Analyses of Microstructures in Fatigued Metals Effects of Roller Working and Ion Nitriding on Fatigue Properties of Eutectoid Steel Effect of Additional Shear Strain Layer on Microstructure and Tensile Strength of Fine Wire EBSD-AFM Hybrid Analysis of Crack Initiation in Stainless Steel under Fatigue Loading Effect of Mean Stress on Fatigue Strength of Short Glass Fiber Reinforced Polybuthyleneterephthalate Effect of Plastic Working on Pulsating Fatigue Strength of Notched Specimen Evaluation of Fracture Surface of 11/4Cr-1/2Mo Steel by Residual Magnetization Induced from Inverse-Magnetostrictive Effect Techniques for Determining Mechanical Properties of Power-Law Materials by Instrumented Indentation Tests Micro-Indentation of Metal Matrix Composite - An FEM Investigation Plasticity Characteristics of Beta Titanium Alloy Obtained Using Depth-Sensing Nano-Indentation Test A Numerical and Experimental Analysis on the Forming Limit of AA 3105 Aluminum Alloy in Radial Extrusion Process Formability Evaluation of Coated and Uncoated Steel Sheets with Consideration of Frictional Characteristics Effect of the Surface Defects on Hydroformability of Aluminum Alloys Preform Design for Formability Enhancement of Tube Hydroforming Process Using Deformation History Formability of Al6061 Extruded Tube in Warm Hydroforming Formability of Roll Cast Recycled Aluminum Alloy Computer Aided Simulation of the Rheology Forging Process for Aluminum Alloys and its Experimental Investigation Texture Evolution and Grain Refinement in AA1050 Aluminum Alloy Sheets Asymmetrically Rolled with Varied Shear Directions Adaptive Simulations of T-Shape Tube Hydroforming Processes Model Building of Finishing Temperature Control for Accelerative Hot Strip Rolling Numerical Simulation of Warm Deep Drawing of AZ31 Magnesium Alloy Sheet with Variable Blank Holder Force Deformation Analysis of Co-Extrusion Process of Aluminum Alloy and Copper Alloy Forming Load Characteristics of Forward and Backward Tube Extrusion Process in Combined Operation A Study on the Pressure Distribution along the Powder-Die Interfaces in Powdered Metal Compaction Process Knowledge Discovery and Management from Numerical Simulation and its Application to Robust Optimization of Extrusion-Forging Processing Evaluation of Hole Flangeability of Steel Sheet with Respect to the Hole Processing Condition Study on Metal Forming by Macro-Micro Combine Numerical Analysis An Experimental Study on the Friction Characteristics in Tube Hydroforming Process Pass Schedule of Wet-Wire Drawing Process with Ultra High Speed for Tire Steel Cord Numerical and Experimental Approach for Rectangular Cup of Li-Ion Battery Container with Extreme Aspect Ratio Flow and Temperature Analysis of Molten Pool in Twin-Roll Strip Casting Process On-Line Optimization of Coiling Temperature Control on Run-Out Table for Hot Strip Mills Mechanics of a Special Asymmetric Rolling of Thin Strip Analysis of the Process of AA-6201 Feedstock Using Continuous Casting and Extrusion Web Based Shape Inspection System for the Forging Products Having Complicated Shapes The 3D Modeling of Dies Based on UG and Numerical Simulation of the Heat Rheological Forming of Titanium Alloy Vane Disk Upper Bound Solution to Compression Forming of Three-Layer Bounded Clad Sheet Hot Forging Comparative Analyses by Using a Combined Finite Element Method Effect of Tool Modeling Accuracy on Sheet Metal Forming Simulation Resistance Heating Characteristics of High-Strength Steel Sheet Blank for Hot Press Forming Protection against Slippage between Roll and Material in the Rolling of Lumber Increase of Wall Thickness around Corner of Multi-Stage Drawn Cup with Flange Using Conical Punches Reduction of Stages in Multi-Stage Metal Forming Process Based on Numerical Optimization in Conjunction with FE Simulation Optimum Design of Forming Sequence of One-Piece Automobile Steel Wheels without Welding Using Finite Element Simulation Modelling of Dynamic Recrystallization in Hot Working A Thermodynamically Consistent Eulerian Description of Finite Elastoplasticity Long Term Creep Analysis of Pipe Bends in a Steam Transfer Line at Elevated Temperature Quantitative Description of Microscopic Plastic Deformation of Polycrystalline Aluminum Using Laser-Scanning Microscope Modeling of Large-Strain Cyclic Plasticity for Accurate Springback Simulation Constitutive Modeling for Uniaxial Time-Dependent Ratcheting of SS304 Stainless Steel Dynamic Strain Aging during the Plastic Flow of Metals Calibration of Texture-Adjusted Strain-Rate Potential and its Application Effect of Texture on High Temperature Deformation Behaviors of Ti-6Al-4V Alloy Plasticity as a Lifesaver in the Design of Cardiovascular Stents Plasticity in the Mechanical Behaviour of Cardiovascular Stents during Stent Preparation (Crimping) and Placement (Expansion) The Influence of Cladding on the Springback of 2024-T3 Aluminium Alloy Ratchetting and Creep Deformation of Solder Alloys Plastic Flow Joining by Shot Peening Relationship between Phenomenological Constitutive Model and Dislocation Structure in Cyclic Plasticity of Austenitic Stainless Steel Simulation of Inelastic Deformation and Thermal Mechanical Stresses in Twin-Roll Casting Process of Mg Alloy Plastic Behavior of Polycrystalline Aluminum during Biaxial Compression with Strain Path Change Elasto-Plastic Deformation around Neighboring Holes in Solid Metal under Biaxial Compression Plastic Deformation Behavior of High Strength Steel Sheet under Non-Proportional Loading and its Modeling An Anisotropic Constitutive Model for a Directionally Solidified Superalloy Implicit Stress Integration for High-Temperature Inelastic Constitutive Models Using Linearization Processing Conditions and Mechanical Properties of Fine Grained Mg by Equal Channel Angular Pressing Comparison of Age-Hardening Characteristic in Thixo-Cast and Rheo-Cast T5-A356 Alloys by Nanoindenter and AFM Experimental Study on Mechanical Energy Hysteresis in Nano Colloidal Damper Using Porous Silica Particle Thermal Imprint Process of Parylene for MEMS Applications Grain Refinement and Strengthening of a Cylindrical Pure-Aluminum Specimen by Using Modified Equal-Channel Angular Pressing Technique Fatigue Damage Mechanism of Nanocrystals in ECAP-Processed Copper Investigated by EBSD and AFM Hybrid Methods Molecular Dynamics Simulation on Crack Initiation at Bi-Material Interface Edges A New Method for Stress and Deformation Analysis from Nano to Macro Dimensional Scales Study on Nanolithography Process of Polycrystalline Copper Using Molecular Dynamic Simulation Molecular Dynamics Analysis on Initial Texture and Processing Route Influences on Grain Refinement Behavior of -Fe by Equal Channel Angular Pressing Dislocation-Grain Boundary Interactions by the Quasicontinuum Method Molecular Dynamics Analysis for Deformation and Fracture Behavior of Copper Thin Films Molecular Dynamics Analysis on Crack Growth Behavior in Single and Nano-Crystalline Fe by the Use of FS-2NNMEAM Hybrid Potential Global vs. Local Stability of Polycrystalline and Amorphous Metals: Molecular Dynamics Study Manipulation of Intrinsic Localized Modes by Elastic Waves in One Dimensional Anharmonic Lattice Systems Molecular Dynamics Simulations of Crystal Rearrangement at Grain Boundaries and the Vicinity Multi-Scale Modeling of Surface Topography in Single-Point Diamond Turning Strain-Rate-Dependent Deformation Behavior of Carbon-Black-Filled Rubber under Monotonic and Cyclic Straining Numerical Evaluation of Micro- to Macroscopic Mechanical Behavior of Plastic Foam Macroscopic Properties of Inhomogeneous Material with Randomly Distributed Pores Elastic-Plastic Constitutive Equation Accounting for Microstructure Microscopic Interlaminar Stress Analysis of CFRP Cross-Ply Laminate Using a Homogenization Theory A Polycrystalline Analysis of Hexagonal Metal Based on the Homogenized Method Implicit Formulation of Homogenization Method for Periodic Elastoplastic Solids Metallo-Thermo-Mechanical Simulation of Carburized Quenching Process by Several Codes - A Benchmark Project - The Effect of Macroscopic Stress State on Transformation Rate in TRIP-Assisted Steels Phase-Field Simulation of Surface Morphology Evolution during Epitaxial Growth of SiGe/Si System Temperature and Strain Rate Effects on Mechanical Behavior of a PMMA Study on the Microstructure and Mechanical Properties of PET and PET/PTT Blends Application of Time-Temperature-Stress Superposition Principle to Nonlinear Creep of Poly(methyl methacrylate) Viscoplastic Constitutive Equation of High-Density Polyethylene Finite Element Analysis of V-Bending of Polypropylene Using Hydrostatic-Pressure Dependent Plastic Constitutive Equation Multiscale Modeling for Large Deformation of Glassy Polymer Based on Molecular Chain Slip Model and Probabilistic Response Law of Inelasticity Seismic Damage Characteristics of RC Shear Wall with Diagonal Profile Steel Braces by Experiment Experimental Study on Mechanical Property of Steel Reinforced Concrete Short Columns of T-Shaped Elastoplastic Damage Modelling and Failure Analysis of Concrete in Compression Coupling Analysis between Stress Induced Anisotropic Damage and Permeability Variation in Brittle Rocks Seismic Performance of a Reinforced Lightweight Aggregate Concrete Frame Research on the Failure Process of Rocks under Tensile Loading Using Elasto-Plastic CA Model Experimental Study on Elastic-Plastic Behavior of a Sandstone under Ground Temperature Statistical Analysis on Strength of Rock Based on YAI Concept Genetic Analysis of Concrete Crack in Hydroelectric Station's Plant Based on FEM Study on the Mechanical Property and the Evolutionary Neural Network Constitutive Model for Limestone under Chemical Corrosive Environments Hysteresis Model for Superelasticity of Shape Memory Alloy Based on ANN Numerical Simulation for Stress-Induced Phase Transformation of SMAs Tube under Tension Shape Memory Composite of SMA and SMP and its Property Influence of Strain Ratio on Bending Fatigue Life in TiNi Shape Memory Thin Wire A Numerical Investigation of Interface Dynamics during Martensitic Transformation in a Shape Memory Alloy Using the Level-Set Method Deformation Behavior of Shape-Control Plate Using NiTi Shape Memory Alloy Wire Superelastic Deformation Properties of TiNi Shape Memory Alloy Shape Recovery and Secondary-Shape Forming in Polyurethane-Shape Memory Polymer A Hydro-Mechanical Coupled Analysis of an Unsaturated River Embankment due to Seepage Flow Parameter Identification of Soil Hyperbolic Constitutive Model by Inverse Analysis Procedure Influence of Soil Dilatancy on Soil Nail Pull-Out Resistance in Completely Decomposed Granite Fill Prediction of Pressure and Density Dependent Failure in Sand-Like Granular Materials under General Stress Conditions Numerical Modelling of Soft Soil Installed by PVDs The Influence of the Fluctuation of Micro-Polar Boundary Conditions on the Evolution of Shear Strain Localization in Granular Materials Deformation Analysis of Partially Saturated Soil in Slopes Unified Three-Dimensional Revision of Modified Cam Clay Model An Elastoplastic Model for Granular Materials Exhibiting Particle Crushing Analysis of Soil-Structure Interaction with Finite Element Method Strength and Interaction of Soil Reinforced with Three-Dimensional Elements A Finite Element Analysis of the Thermo-Hydro-Mechanically Coupled Problem of a Cohesive Deposit Using a Thermo-Elasto-Viscoplastic Model Study of Design and Evaluation of Drum Assembly for High Speed Dehydration in Washing Machine Stringer Stiffened Cylinders on Local Supports - The Plastic Buckling Behavior Analysis of Elasto-Plastic Stresses and Structural Reliability of a Multilayer Pressure Vessel Stability Analyses of the Three Gorges Dam Foundation against Sliding by Strength Reduction of Finite Elements Second-Order Elasto-Plastic Analysis of Frames by Differential Quadrature Element Method Reliability Analysis for Effects of Reservoir Water Level Change on Embankment Dam Pattern Shifting Analyses of Micro-Structures of IC Package Analysis of Hydrogen Diffusion in Notched High-Strength Steel Wires Study on Calculation Method of Press Straightening Stroke Based on Straightening Process Model Stress Testing of Individual Steel Strands in a Multiple-Cable Single Borehole Anchorage for Geotechnical Engineering Geometrical Similarity of Thermo-Structural Problems The Production and Performance Estimation of Dunnage for Transportation of a Steel Roll Coil The Effect of Temperature Variations on Cycle Time Using an Optimized Cooling Design and a Temperature Control System Stress Analysis of Cold Die Compaction with Rotating Tools for Aluminum Powder Analysis of Cavity Tool Stresses in Channel Angular Extrusion Nonlinear Analysis of R/C Frame under Static and Cyclic Loadings Failure Mode Analysis for Column over Designed Ductile Frames Quasi-Static and Dynamic Axial Crushing of Various Polygonal Tubes Basic and Optimum Column Over-Design Factor Avoiding Story Mechanism for Frame Structures The Occurrence Limit of Strain Nonuniformity in Thin-Walled Cylinders Subjected to Cyclic Torsion Superplastic Properties and Microstructure of Friction Stir Welded Joints of Zn-22wt.%Al Alloy Residual Stresses in TIG-Welded I-Beams. Experimental Test-Setup and Validation of Numerical Model Assessing the Flaws in Welded Seam of Header of a 300MW Steam Turbine Generator Unit Multi Stage Seaming Process for Large Tubular Mechanical Bonded Structure Effect of Dimensional Tolerance on Displacements and Stresses of Wedged-Ring Joint Structure A Study on Friction Stir Process of Magnesium Alloy AZ31 Sheet Reduction of Residual Stress of Welded Joint Using Local Plasticity Caused by Ultrasonic Vibration Finite Element Simulation of Self-Piercing Riveting of Three Aluminium Alloy Sheets Self Loosening Behavior of Metal Thread Joints under Transverse Cyclic Loading Formability of Friction Stir Welded and Arc Welded 5083 Aluminum Alloy Sheets Effects of Loading Speed and Shear Prestrain on Adhesive Fatigue Strength in Single-Lap Joint Viscoplastic Behavior of Acrylic Adhesive in Butt-Joint at Various Temperatures under Complex Loading : Experimentation and Modelling

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA82123833
• ISBN:
  • 9780878494330
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zuerich
• ページ数/冊数: 2 v.
• 大きさ: 26 cm
• 親書誌ID:
  • BA1292205X