Engineering plasticity and its applications from nanoscale to macroscale : proceedings of the 8th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2006), 25-29 September 2006, Nagoya University, Nagoya, Japan
著者
書誌事項
Engineering plasticity and its applications from nanoscale to macroscale : proceedings of the 8th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2006), 25-29 September 2006, Nagoya University, Nagoya, Japan
（Key engineering materials, v. 340-341）
Trans Tech, c2007
- : set
- pt. 1
- pt. 2
- タイトル別名
-
The proceedings of AEPA2006
The proceedings of AEPA 2006
大学図書館所蔵 全2件
注記
Includes bibliographical references and indexes
"This proceedings contains 240 papers which were presented in oral and poster sessions at AEPA2006."--preface
The symposium was organized by The AEPA2006 Organizing Committee in collaboration with The Japan Society of Mechanical Engineers ... [et al.]
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This edited collection of 240 peer-reviewed articles covers a broad range of topics dealing with plasticity in various materials, such as metals, composites, polymers, foams, soils, and rocks at the nano-, micro- and macro-scales. These informative papers will bring the reader fully up-to-date with the latest research efforts advancing on a broad range of fronts in engineering plasticity
目次
An Internal Variable Approach to Inelastic Deformation Including Structural Superplasticity
Mechanics of Carbon Nanotubes: A Continuum Theory Based on Interatomic Potentials
Plasticity-Related Microstructure-Property Relations for Materials Design
Discrete Dislocation Modeling of Plastic Flow Processes
Nanoindentation-Induced Collective Dislocation Behavior and Nanoplasticity
Analyses of Cavitation Instabilities in Ductile Metals
The Effect of Heating Rate on the Formability of Bulk Metallic Glass in a Supercooled Liquid Region
Investigation of the Dynamic Buckling in the Carbon Nanotube under Impact Torque
Deformation Behavior of Dual-Phase LTSP Ti3Al Based Alloy
Evaluation of Adhesive Properties of Arc PVD Coatings on Non-Nitrided and Nitrided Various Substrates
Mechanical Alloying of Ti-Al-Si-C Powders, their Thermal Stability, Phase Evolution, and Synthesis and Deformation of In Situ Produced Titanium Aluminide Composites
High Temperature Deformation Behaviour of a New Magnesium Alloy
Micromechanical Study on High-Temperature Behavior of ZrO2 Particle-Dispersed Ni Composites
Evaluation of Strain Concentration in Carbon Nanotube with Bend Junction
High Strain Rate Deformation Behavior of Mg-Al-Zn Alloys at Elevated Temperatures
Mechanical Properties of Bulk Glassy Metal after Deformation under High Temperature Conditions
Effects of Strain Rate and Temperature on Yield Locus for AZ31 Magnesium Alloy Sheet
Elastoplastic Behavior of Particle Reinforced Composites Considering the Effect of Interfacial Debonding
Inelastic Behaviour of Concrete/Steel Composite Beam in Fire
Possible Approaches in Modelling Rearrangement in a Microstructured Material
Proposal of Various Connecting Methods of Fiber Strands and Finite Element Method Analysis of Strength
Rate-Dependent Off-Axis Tensile Behavior of Cross-Ply CFRP Laminates at Elevated Temperature and Simulation Using a Viscoplasticity Model
Effects of Stacking Sequence on Notched Strengths of Cross-Ply CFRP Laminates and Analysis Using a Cohesive Zone Model
A Modified Kinematic-Hardening Viscoplasticity Model for Off-Axis Creep Behavior of Unidirectional CFRPs at High Temperature
Evaluation of the Interfacial Properties in Polymer Matrix Composite: Experiments and Elasto-Plastic Shear-Lag Analysis
Higher-Order Stress due to Self Energy of Geometrically Necessary Dislocations
Forming Limits Prediction of FCC Sheet Metal Adopting Crystal Plasticity
High Density Bands of GN Dislocations Formed by Multi Body Interaction in Compatible Type Multi Crystal Models
Dependence of Localized Deformation on Point Defect Development Caused by Intersected Cross Slip among Dislocations
Crystal Plasticity Analysis of Dislocation Accumulation in ULSI Cells with Consideration of Temperature Dependence of the Lattice Friction Stress for Silicon
Multiscale Modeling and Simulation of Crystal Plasticity Based on Dislocation Patterning in Polycrystal
Effects of Crystallographic Texture on Plastic Flow Localization
New Physical Interpretation of Incompatibility and Application to Dislocation Substructure Evolution
Inspection and Model Experiment of a Damaged Arch Bridge
Destructive and Ultrasonic Investigations of Damage Development in Metallic Materials
Continuum Damage Model of Creep-Fatigue Interaction in Ni-Base Superalloy
Elastic-Plastic Deformation of Perforated Sheets with Randomly Distributed Holes
Tensile Mechanical Properties of AM50A Alloy by Hopkinson Bar
Dynamic Tensile Characteristics of TRIP-Type and DP-Type Sheets for an Auto-Body
Elastic-Plastic Dynamic Response of the Tube with Free Boundary Condition Subjected to Impact
Counterintuitive Dynamic Behavior in Elastic-Plastic Structures
Evaluation of Dynamic Behaviors and Damage Mechanism of Ancient Timber Architectures
The Effect of Strain Rate on the Material Characteristics of Nickel-Based Superalloy Inconel 718
A Dynamic Damage Model for Uniaxial Compressive Response of AD90 Alumina
Three Modes of Penetration Mechanisms of A3 Steel Cylindrical Projectiles Impact onto 45 Steel Plates
On Dynamical Systems at the Portevin-Le Chatelier Effect
Periodic Motions and Bifurcations of a Plastic Impact Machine
Improvement of Measurement Accuracy of Non-Coaxial Hopkinson Bar Method
Deformation and Failure Behaviors of PC/ABS (50/50) Blends under Impact
Finite Element Analysis of Alternate Hard and Soft Multi-Layers under Circumscription Loading
Development of Stereolithography Simulation Process Based on the Dynamic Finite Element Method
The Elasto-Plastic and Geometrically Nonlinear Finite Element Model of Space Beam Considering Restraint Torsion
An Elasto-Plastic Finite Element Simulation of the UO-Tube Processes of Sheet Metal
Solid Shell Element and its Application in Roll Forming Simulation
3-D Finite Element Simulation of Pulsating T-Shape Hydroforming of Tubes
Automatic Approach on Derivation of Loading Path Using Adaptive Finite Element Analysis Simulation Method
Three-Dimensional Numerical Manifold Method Based on Hexahedron Element with Full First-Order Cover Function and its Application in Underground Excavation
Development of PC Cluster Parallel Processing Scheme of 3-D Rigid-Plastic Finite Element Method Using Diagonal Matrix
Numerical Investigation of Flexural Properties of Sheet Metals Subjected to Embossing and Restoration Process
Dynamic Indentation and Penetration Properties of Aluminium Foams
The Dependence of the Energy-Absorption Capacity of Metal Hollow Sphere Materials on their Relative Density
Dynamic Mechanical Behaviors of Aluminium Foam Filled Circular Tubes under Transverse Compressive Load
Constitutive Relation of Open-Celled Metal Foams Based on the Mesoscopic Behavior of Random Cells
Development of 3-Dimensional Compression Device and its Application to Clarification of Densification Behavior of Urethane-Foam
Compressive Properties of Porous Metals with Homogeneous Pore Characteristics
Modeling of Fretting Wear Based on Cumulative Plastic Strain and Saturated Shear Stress
A Gray Prediction Model for Unequal-Interval Time Sequence and its Application in Creep Fracture Mechanics
Estimation of Hysteretic Energy of MDOF Structures Based on Equivalent SDOF Systems
The Static and Dynamic Fracture Test of X70 Pipeline Steel
Fracture Parameters on Three-Dimensional Sliding Mode Fracture
Interfacial Cracks of Antiplane Sliding Mode between Usual Elastic Materials and Quasicrystals
Combined Adaptive Finite Element Method and J-Domain Integral Technique for Crack Problems
Investigation on a Mn-Ti High Strength Steel
Mechanics Analysis on Bar Cutting Based on High Speed and Restrained State
Fracture Properties of Softwood under Mode I Loading Perpendicular to the Grain
A Study on the Application Infrared Thermography Camera for the 7FA Gas Turbine Blade Covering Crack Detecting
Effect of Pitting Corrosion on Ultimate Strength of Web Plates Subjected to Shear Loading
Optimum Performance of High Tension Steel Sheets under Various Heat Treatment Process
Increase of Stress Intensity near Free-Edge of Elastic-Creeping Bi-Material Interface under a Sustained Load
Influence of Tensile Pre-Strain on the Torsional Fatigue Crack Behaviors of a Structural Steel
Characteristics of Complementary Plastic Energy Produced by Hysteresis Curves and Analyses of Microstructures in Fatigued Metals
Effects of Roller Working and Ion Nitriding on Fatigue Properties of Eutectoid Steel
Effect of Additional Shear Strain Layer on Microstructure and Tensile Strength of Fine Wire
EBSD-AFM Hybrid Analysis of Crack Initiation in Stainless Steel under Fatigue Loading
Effect of Mean Stress on Fatigue Strength of Short Glass Fiber Reinforced Polybuthyleneterephthalate
Effect of Plastic Working on Pulsating Fatigue Strength of Notched Specimen
Evaluation of Fracture Surface of 11/4Cr-1/2Mo Steel by Residual Magnetization Induced from Inverse-Magnetostrictive Effect
Techniques for Determining Mechanical Properties of Power-Law Materials by Instrumented Indentation Tests
Micro-Indentation of Metal Matrix Composite - An FEM Investigation
Plasticity Characteristics of Beta Titanium Alloy Obtained Using Depth-Sensing Nano-Indentation Test
A Numerical and Experimental Analysis on the Forming Limit of AA 3105 Aluminum Alloy in Radial Extrusion Process
Formability Evaluation of Coated and Uncoated Steel Sheets with Consideration of Frictional Characteristics
Effect of the Surface Defects on Hydroformability of Aluminum Alloys
Preform Design for Formability Enhancement of Tube Hydroforming Process Using Deformation History
Formability of Al6061 Extruded Tube in Warm Hydroforming
Formability of Roll Cast Recycled Aluminum Alloy
Computer Aided Simulation of the Rheology Forging Process for Aluminum Alloys and its Experimental Investigation
Texture Evolution and Grain Refinement in AA1050 Aluminum Alloy Sheets Asymmetrically Rolled with Varied Shear Directions
Adaptive Simulations of T-Shape Tube Hydroforming Processes
Model Building of Finishing Temperature Control for Accelerative Hot Strip Rolling
Numerical Simulation of Warm Deep Drawing of AZ31 Magnesium Alloy Sheet with Variable Blank Holder Force
Deformation Analysis of Co-Extrusion Process of Aluminum Alloy and Copper Alloy
Forming Load Characteristics of Forward and Backward Tube Extrusion Process in Combined Operation
A Study on the Pressure Distribution along the Powder-Die Interfaces in Powdered Metal Compaction Process
Knowledge Discovery and Management from Numerical Simulation and its Application to Robust Optimization of Extrusion-Forging Processing
Evaluation of Hole Flangeability of Steel Sheet with Respect to the Hole Processing Condition
Study on Metal Forming by Macro-Micro Combine Numerical Analysis
An Experimental Study on the Friction Characteristics in Tube Hydroforming Process
Pass Schedule of Wet-Wire Drawing Process with Ultra High Speed for Tire Steel Cord
Numerical and Experimental Approach for Rectangular Cup of Li-Ion Battery Container with Extreme Aspect Ratio
Flow and Temperature Analysis of Molten Pool in Twin-Roll Strip Casting Process
On-Line Optimization of Coiling Temperature Control on Run-Out Table for Hot Strip Mills
Mechanics of a Special Asymmetric Rolling of Thin Strip
Analysis of the Process of AA-6201 Feedstock Using Continuous Casting and Extrusion
Web Based Shape Inspection System for the Forging Products Having Complicated Shapes
The 3D Modeling of Dies Based on UG and Numerical Simulation of the Heat Rheological Forming of Titanium Alloy Vane Disk
Upper Bound Solution to Compression Forming of Three-Layer Bounded Clad Sheet
Hot Forging Comparative Analyses by Using a Combined Finite Element Method
Effect of Tool Modeling Accuracy on Sheet Metal Forming Simulation
Resistance Heating Characteristics of High-Strength Steel Sheet Blank for Hot Press Forming
Protection against Slippage between Roll and Material in the Rolling of Lumber
Increase of Wall Thickness around Corner of Multi-Stage Drawn Cup with Flange Using Conical Punches
Reduction of Stages in Multi-Stage Metal Forming Process Based on Numerical Optimization in Conjunction with FE Simulation
Optimum Design of Forming Sequence of One-Piece Automobile Steel Wheels without Welding Using Finite Element Simulation
Modelling of Dynamic Recrystallization in Hot Working
A Thermodynamically Consistent Eulerian Description of Finite Elastoplasticity
Long Term Creep Analysis of Pipe Bends in a Steam Transfer Line at Elevated Temperature
Quantitative Description of Microscopic Plastic Deformation of Polycrystalline Aluminum Using Laser-Scanning Microscope
Modeling of Large-Strain Cyclic Plasticity for Accurate Springback Simulation
Constitutive Modeling for Uniaxial Time-Dependent Ratcheting of SS304 Stainless Steel
Dynamic Strain Aging during the Plastic Flow of Metals
Calibration of Texture-Adjusted Strain-Rate Potential and its Application
Effect of Texture on High Temperature Deformation Behaviors of Ti-6Al-4V Alloy
Plasticity as a Lifesaver in the Design of Cardiovascular Stents
Plasticity in the Mechanical Behaviour of Cardiovascular Stents during Stent Preparation (Crimping) and Placement (Expansion)
The Influence of Cladding on the Springback of 2024-T3 Aluminium Alloy
Ratchetting and Creep Deformation of Solder Alloys
Plastic Flow Joining by Shot Peening
Relationship between Phenomenological Constitutive Model and Dislocation Structure in Cyclic Plasticity of Austenitic Stainless Steel
Simulation of Inelastic Deformation and Thermal Mechanical Stresses in Twin-Roll Casting Process of Mg Alloy
Plastic Behavior of Polycrystalline Aluminum during Biaxial Compression with Strain Path Change
Elasto-Plastic Deformation around Neighboring Holes in Solid Metal under Biaxial Compression
Plastic Deformation Behavior of High Strength Steel Sheet under Non-Proportional Loading and its Modeling
An Anisotropic Constitutive Model for a Directionally Solidified Superalloy
Implicit Stress Integration for High-Temperature Inelastic Constitutive Models Using Linearization
Processing Conditions and Mechanical Properties of Fine Grained Mg by Equal Channel Angular Pressing
Comparison of Age-Hardening Characteristic in Thixo-Cast and Rheo-Cast T5-A356 Alloys by Nanoindenter and AFM
Experimental Study on Mechanical Energy Hysteresis in Nano Colloidal Damper Using Porous Silica Particle
Thermal Imprint Process of Parylene for MEMS Applications
Grain Refinement and Strengthening of a Cylindrical Pure-Aluminum Specimen by Using Modified Equal-Channel Angular Pressing Technique
Fatigue Damage Mechanism of Nanocrystals in ECAP-Processed Copper Investigated by EBSD and AFM Hybrid Methods
Molecular Dynamics Simulation on Crack Initiation at Bi-Material Interface Edges
A New Method for Stress and Deformation Analysis from Nano to Macro Dimensional Scales
Study on Nanolithography Process of Polycrystalline Copper Using Molecular Dynamic Simulation
Molecular Dynamics Analysis on Initial Texture and Processing Route Influences on Grain Refinement Behavior of -Fe by Equal Channel Angular Pressing
Dislocation-Grain Boundary Interactions by the Quasicontinuum Method
Molecular Dynamics Analysis for Deformation and Fracture Behavior of Copper Thin Films
Molecular Dynamics Analysis on Crack Growth Behavior in Single and Nano-Crystalline Fe by the Use of FS-2NNMEAM Hybrid Potential
Global vs. Local Stability of Polycrystalline and Amorphous Metals: Molecular Dynamics Study
Manipulation of Intrinsic Localized Modes by Elastic Waves in One Dimensional Anharmonic Lattice Systems
Molecular Dynamics Simulations of Crystal Rearrangement at Grain Boundaries and the Vicinity
Multi-Scale Modeling of Surface Topography in Single-Point Diamond Turning
Strain-Rate-Dependent Deformation Behavior of Carbon-Black-Filled Rubber under Monotonic and Cyclic Straining
Numerical Evaluation of Micro- to Macroscopic Mechanical Behavior of Plastic Foam
Macroscopic Properties of Inhomogeneous Material with Randomly Distributed Pores
Elastic-Plastic Constitutive Equation Accounting for Microstructure
Microscopic Interlaminar Stress Analysis of CFRP Cross-Ply Laminate Using a Homogenization Theory
A Polycrystalline Analysis of Hexagonal Metal Based on the Homogenized Method
Implicit Formulation of Homogenization Method for Periodic Elastoplastic Solids
Metallo-Thermo-Mechanical Simulation of Carburized Quenching Process by Several Codes - A Benchmark Project -
The Effect of Macroscopic Stress State on Transformation Rate in TRIP-Assisted Steels
Phase-Field Simulation of Surface Morphology Evolution during Epitaxial Growth of SiGe/Si System
Temperature and Strain Rate Effects on Mechanical Behavior of a PMMA
Study on the Microstructure and Mechanical Properties of PET and PET/PTT Blends
Application of Time-Temperature-Stress Superposition Principle to Nonlinear Creep of Poly(methyl methacrylate)
Viscoplastic Constitutive Equation of High-Density Polyethylene
Finite Element Analysis of V-Bending of Polypropylene Using Hydrostatic-Pressure Dependent Plastic Constitutive Equation
Multiscale Modeling for Large Deformation of Glassy Polymer Based on Molecular Chain Slip Model and Probabilistic Response Law of Inelasticity
Seismic Damage Characteristics of RC Shear Wall with Diagonal Profile Steel Braces by Experiment
Experimental Study on Mechanical Property of Steel Reinforced Concrete Short Columns of T-Shaped
Elastoplastic Damage Modelling and Failure Analysis of Concrete in Compression
Coupling Analysis between Stress Induced Anisotropic Damage and Permeability Variation in Brittle Rocks
Seismic Performance of a Reinforced Lightweight Aggregate Concrete Frame
Research on the Failure Process of Rocks under Tensile Loading Using Elasto-Plastic CA Model
Experimental Study on Elastic-Plastic Behavior of a Sandstone under Ground Temperature
Statistical Analysis on Strength of Rock Based on YAI Concept
Genetic Analysis of Concrete Crack in Hydroelectric Station's Plant Based on FEM
Study on the Mechanical Property and the Evolutionary Neural Network Constitutive Model for Limestone under Chemical Corrosive Environments
Hysteresis Model for Superelasticity of Shape Memory Alloy Based on ANN
Numerical Simulation for Stress-Induced Phase Transformation of SMAs Tube under Tension
Shape Memory Composite of SMA and SMP and its Property
Influence of Strain Ratio on Bending Fatigue Life in TiNi Shape Memory Thin Wire
A Numerical Investigation of Interface Dynamics during Martensitic Transformation in a Shape Memory Alloy Using the Level-Set Method
Deformation Behavior of Shape-Control Plate Using NiTi Shape Memory Alloy Wire
Superelastic Deformation Properties of TiNi Shape Memory Alloy
Shape Recovery and Secondary-Shape Forming in Polyurethane-Shape Memory Polymer
A Hydro-Mechanical Coupled Analysis of an Unsaturated River Embankment due to Seepage Flow
Parameter Identification of Soil Hyperbolic Constitutive Model by Inverse Analysis Procedure
Influence of Soil Dilatancy on Soil Nail Pull-Out Resistance in Completely Decomposed Granite Fill
Prediction of Pressure and Density Dependent Failure in Sand-Like Granular Materials under General Stress Conditions
Numerical Modelling of Soft Soil Installed by PVDs
The Influence of the Fluctuation of Micro-Polar Boundary Conditions on the Evolution of Shear Strain Localization in Granular Materials
Deformation Analysis of Partially Saturated Soil in Slopes
Unified Three-Dimensional Revision of Modified Cam Clay Model
An Elastoplastic Model for Granular Materials Exhibiting Particle Crushing
Analysis of Soil-Structure Interaction with Finite Element Method
Strength and Interaction of Soil Reinforced with Three-Dimensional Elements
A Finite Element Analysis of the Thermo-Hydro-Mechanically Coupled Problem of a Cohesive Deposit Using a Thermo-Elasto-Viscoplastic Model
Study of Design and Evaluation of Drum Assembly for High Speed Dehydration in Washing Machine
Stringer Stiffened Cylinders on Local Supports - The Plastic Buckling Behavior
Analysis of Elasto-Plastic Stresses and Structural Reliability of a Multilayer Pressure Vessel
Stability Analyses of the Three Gorges Dam Foundation against Sliding by Strength Reduction of Finite Elements
Second-Order Elasto-Plastic Analysis of Frames by Differential Quadrature Element Method
Reliability Analysis for Effects of Reservoir Water Level Change on Embankment Dam
Pattern Shifting Analyses of Micro-Structures of IC Package
Analysis of Hydrogen Diffusion in Notched High-Strength Steel Wires
Study on Calculation Method of Press Straightening Stroke Based on Straightening Process Model
Stress Testing of Individual Steel Strands in a Multiple-Cable Single Borehole Anchorage for Geotechnical Engineering
Geometrical Similarity of Thermo-Structural Problems
The Production and Performance Estimation of Dunnage for Transportation of a Steel Roll Coil
The Effect of Temperature Variations on Cycle Time Using an Optimized Cooling Design and a Temperature Control System
Stress Analysis of Cold Die Compaction with Rotating Tools for Aluminum Powder
Analysis of Cavity Tool Stresses in Channel Angular Extrusion
Nonlinear Analysis of R/C Frame under Static and Cyclic Loadings
Failure Mode Analysis for Column over Designed Ductile Frames
Quasi-Static and Dynamic Axial Crushing of Various Polygonal Tubes
Basic and Optimum Column Over-Design Factor Avoiding Story Mechanism for Frame Structures
The Occurrence Limit of Strain Nonuniformity in Thin-Walled Cylinders Subjected to Cyclic Torsion
Superplastic Properties and Microstructure of Friction Stir Welded Joints of Zn-22wt.%Al Alloy
Residual Stresses in TIG-Welded I-Beams. Experimental Test-Setup and Validation of Numerical Model
Assessing the Flaws in Welded Seam of Header of a 300MW Steam Turbine Generator Unit
Multi Stage Seaming Process for Large Tubular Mechanical Bonded Structure
Effect of Dimensional Tolerance on Displacements and Stresses of Wedged-Ring Joint Structure
A Study on Friction Stir Process of Magnesium Alloy AZ31 Sheet
Reduction of Residual Stress of Welded Joint Using Local Plasticity Caused by Ultrasonic Vibration
Finite Element Simulation of Self-Piercing Riveting of Three Aluminium Alloy Sheets
Self Loosening Behavior of Metal Thread Joints under Transverse Cyclic Loading
Formability of Friction Stir Welded and Arc Welded 5083 Aluminum Alloy Sheets
Effects of Loading Speed and Shear Prestrain on Adhesive Fatigue Strength in Single-Lap Joint
Viscoplastic Behavior of Acrylic Adhesive in Butt-Joint at Various Temperatures under Complex Loading : Experimentation and Modelling
「Nielsen BookData」 より