Superplasticity in advanced materials : ICSAM 2006 : proceedings of the 9th International Conference on Superplasticity in Advanced Materials, 23-26 June 2006, Chengdu, P.R. China
著者
書誌事項
Superplasticity in advanced materials : ICSAM 2006 : proceedings of the 9th International Conference on Superplasticity in Advanced Materials, 23-26 June 2006, Chengdu, P.R. China
(Materials science forum, v. 551-552)
Trans Tech Publications, c2007
大学図書館所蔵 件 / 全3件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical refernces and index
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Interest in the phenomenon of superplasticity has been increasing steadily over the past thirty-four years, both from the viewpoint of fundamental scientific understanding as well as of industrial application. The scope of superplasticity has also broadened materials-wise, and now includes, in addition to metals: intermetallics, ceramics, bulk metallic glasses, nanostructured materials and composites.
目次
Overview of Quick Plastic Forming Technology
Superplasticity of Ultrafine-Grained Aluminum Alloy Processed by ECAP and Warm Rolling
Superplastic Forming and Foaming Process for Porous Aluminum Plates
Production of Ti-6Al-4V Sheets for Low Temperature Superplastic Forming
Fibre Reinforced Refractory Castables :An Alternative Solution for SPF Die Manufacturing
Superplastic Titanium Tanks for Propulsion System of Satellites
The Applications of SPF/DB Combined with Welding Technologies
Grain Refinement and High Temperature Deformation in Friction Stir Processed Sheets of Magnesium Alloys
Overview of FSW Project in Osaka East Urban Area Industry-Government-Academia Collaboration
Mathematical Model for Super Plastic Flow in Advanced Structural Materials
Research on the Superplastic Forming of Copper Alloy Solid-Bearing Cages Used in Railway Vehicles
Study of the Superplasticity of Copper Alloys Used for Solid Cages
Advances in the Superplastically Formed and Diffusion Bonded Process
Analysis, Planning, Modelling and Presentation of an SPF Model-Plant in Virtual Reality
Diffusion Bonding of Aluminum Alloy Using a High-Boiling Liquid Protection
The ASTM International Standard Test Method for Determining the Superplastic Properties of Metallic Materials
Tool Thermal Behavior in SPF Environment
Analysis of Different Specimen Geometries for Tensile Tests in Superplastic Conditions for an Aluminium Alloy
Forming Limit Diagrams for AA5083 under SPF and QPF Conditions
Mechanisms of Microsuperplasticity
On the Phenomenology and Mechanics of Super Plastic Flow in Advanced Structural Materials
Superplastic Deformation Mechanism of a Zn-Al Eutectoid Alloy
Study on the Interface Characteristic of Superplastic Diffusion Bonding Joint of Dissimilar Steels
Superplastic Forming and Diffusion Bonding for Four-Layer Sheets Structure of Nickel-Base Superalloy
Influence of Diffusion Bonding for Superplasticity Magnesium Alloys with the Fore and Post Treatment
Constant-Load Tester Based on Lever-Rule and Measurement of Strain Hardening Index and Strain Rate Sensitivity Index
Submicrocrystalline Structure Formation in Ti and Ti-64 Alloy by Warm "abc" Deformation
The Role of Nd3Sn Phase in Superplastic Deformation of Ti-5A1-4Sn-2Zr-1Mo-0.25Si-1Nd Alloy
Effect of ECAP Hot Processing on Grain Refinement and Superplasticity of 1933 Aluminium Alloy
Superplasticity in Ultrahigh Carbon (1.6 Pct C) Steel
A Comparative Study on Superplasticity of Mg-Zn-Y-Zr Processed by ECAE and Hot Rolling
Superplastic Forming of Magnesium Alloys: Production of Microstructures, Superplastic Properties, Cavitation Behaviour
Superplastic Deformation of Magnesium Alloy AZ31 under Biaxial Loading Condition
Biaxial Tensile Deformation Behavior and Microstructural Evolutions of Superplasticity in AZ31 Magnesium Alloy
Superplasticity and Superplastic Formability of Hot-Rolled AZ31 Magnesium Alloy
Superplastic Behaviors of Casting AZ31 Magnesium Alloy
SPF/DB Research in ZK60 Alloy with Gasification Agent as Pressurization Mediator
Research on Superplastic Forming of Supplied LY12 Aluminum Alloy for Fishing Spools
Superplasticity in Ultrafine Grained Magnesium Alloy AZ31 Prepared by Accumulative Roll Bonding
Finite Element Modeling of Superplastic Forming in the Presence of Back Pressure
Numerical Simulation of Superplastic Forming of a Magnesium Alloy Part
Effect of the Process Parameters on the Deformation during Superplastic Extrusion of Ti-6.0Al-2.0Zr-1.0Mo-1.0V Alloy
FEM Analysis of Superplastic Forming Process for an Oval Head Shell
Comparative Study of Element Formulation on Simulation of Superplastic Forming
Numerical Simulation and Experimental Investigation of High Strain Rate Superplastic Forming (SPF) of Al-6Mg-0.2Sc Alloy
The Pilot Study on the Defect Prediction and Numerical Simulation in the Superplastic/ Extrusion of Copper Alloy
Finite Element Simulation of Superplastic Isothermal Forging Process for Nickel-Base PM Superalloy
Reproducing Kernel Particle Method Numerical Modeling of Thin Sheet Superplastic Tension Forming
Superplastic Deforming Analysis Based on Element Free Galerkin Method
Numerical-Experimental Characterization of a Superplastic AZ31 Magnesium Alloy
Strain Rate Gradient Model with Couple Stress for Micro Scale Rigid-Viscosity-Plastic Deformation
First-Principles Calculations of Grain Boundary-Surface for Various Grain Boundaries with Different Energies in Aluminum
Analysis of the Behavior of a Clad Material Al-Zinag-Al
The Activation Energy of Superplastic Flow above the Critical Temperature for Steel CrWMn
Scale Effects in the High Temperature Gas Pressure Forming of Electrodeposited Fine-Grained Copper Thin Sheet
Development of Superplastic Properties in Quasi Single Phase Alloys
High-Temperature Deformation Behavior of ELI Grade Ti-6Al-4V Alloy with Martensite Microstructure
Superplasticity in CP-Titanium Alloys
Microstructure Evolution of the Ti-6.62Al-5.14Sn-1.82Zr Alloy in the Superplastic Compression
The Effects of Extrusion Ratio and Friction on Material Microstructures during Sandglass Extrusion Process
The Effect of Grain Size on Superplastic Deformation of Ti-6Al-4V Alloy
Isothermal Compressive Superplastic Deformation and its Constitute Equation of Structural Steel and Tool Steel
Solid State Diffusion Welding by Superplastic Coordinate Deformation between Vacuum Spray Fusing Alloy G111WC and Steel Substrate
The Research on Superplasticity of Two New Ti Alloys
Superplastic Bulging Capability of Ti-6Al-4V Butt-Welded Plate by High Energy Beam Welding
Effect of Hydrogenation on the Microstructure during the Isothermal Compression of Ti-5.6Al-4.8Sn-2.0Zr-1.0Mo Alloy
Influence of Deformation Heat Treatment on the Ultra-Fine Structure of Austenitic Stainless Steel
Superplastic Forming and Thickness Distribution of Ti6Al4V Alloy Denture Base
Superplastic Behavior and Microstructural Evolution of GH4169
Superplastic Properties and Superplastic Forming/Diffusion Bonding of -TiAl+ 2-Ti3Al Sheet Materials
Superplastic Properties of + 2 Titanium Aluminide Alloy Ti-43Al-(Nb,Mo,B) in Cast + Post-Solidification Heat Treated Condition
Heat Treatment of Ti2AlNb Intermetallic and its Superplastic Properties
Investigation of Compression Deformation Behavior and Microstructure Evolution of NiAl-Cr (Mo)-Hf Alloy at Elevated Temperature
A Study on Superplastic Behavior and Microstructural Evolution of an Isothermally Forged TiAl Based Alloy
Synthesis and Superplastic Deep Drawing of TiAl Alloy
Microstructures after Bending Deformations to Fracture of Zr Ion Irradiated Superplastic Ceramic 3Y-TZP
Superplastic Phenomenon in Sc2O3 Doped Zirconia Polycrystals to be Used for SOFC
Superplastic Sinter-Forging of Fine-Grained Si3N4-Si2N2O Composite at Low Temperature
Fabrication of Nanocrystalline Superplastic ZrO2 Ceramics
Superplastic Extrusion of Nano-Structured Si2N2O-Sialon
Superplastic Extrusion of Ultra Fine-Grained 3Y-TZP/Al2O3 Ceramic for Turbine Disk
Tribology in Superplastic Forming Processing of 3Y-TZP/Al2O3 Ceramic at Elevated Temperatures
Superplastic Joining of TZP Enhanced by Titania-Doping in the Insert Material
Superplastic Deformation Behavior of Electrodeposited Nickel Matrix Nanocomposite
Effect of Superplastic Deformation on the Properties of Zirconia Dispersed Alumina Nanocomposite
Numerical Simulation and Experimental Research on Superplasticity of Ceramic/Ceramic Laminated Composite
Superplasticity and Microstructure Evolution of Electrodeposited Nanocrystalline Nickel
Superplastic Micro Deep Drawing of Fine-Grained Nickel at Elevated Temperatures
Rheological Analogies of Superplastic and Viscous-Plastic Materials Flow
Homogeneous Flow of In Situ Bulk Metallic Glass Matrix Composite
Deformation Behavior of Zr-Based Metallic Glass and Microforming of Microgears
Gas Pressure Forming of Amorphous Fe78Si9B13 Alloy
Application of High-Strain-Rate Superplastic Zn-Al Alloy to Seismic Dampers and its Optimised Shape Design
Low Temperature Superplasticity of Titanium Alloy Processed by Thermohydrogen Treatment
Superplastic Flow of Silicon Nitride-Based Nanocomposite at High Strain Rates
Low Temperature Superplasticity and Intragranular Misorientation in Severely Rolled Sheets of Al-4.5%Mg-0.7%Mn Based Alloys
Superplasticity of Nanostructured Nickel Alloy and Composite Fabricated by Electrodeposition
High Resolution Surface Studies of Superplastic Deformation
Cavitation Behavior of Ultra-Fine Grained Ti-6Al-4V Alloy Produced by Equal-Channel Angular Pressing
The Effect of Strain Rate History on the Dynamic Grain Growth Behaviour of AA 5083
Cavitation Behavior of Fine-Grained 1420 Al-Li Alloy during Superplastic Deformation
Study on Superplastic Grain Growth Model and Dynamic Simulation
Cavity of Al-Cu-Mg Alloy during Superplastic Deformation
Microstructure Evolution and Mechanical Properties of Mg Alloy AZ31D Processed by Equal Channel Angular Extrusion
「Nielsen BookData」 より