PRICM 6 : selected, peer reviewed papers from The sixth Pacific Rim International Conference on Advanced Materials and Processing, November 5-9, 2007, ICC Jeju, Jeju Island, Korea
著者
書誌事項
PRICM 6 : selected, peer reviewed papers from The sixth Pacific Rim International Conference on Advanced Materials and Processing, November 5-9, 2007, ICC Jeju, Jeju Island, Korea
(Materials science forum, v. 561-565)
Trans Tech Publications, c2007
- set
- pt. 1
- pt. 2
- pt. 3
- タイトル別名
-
PRICM 6 : Sixth Pacific Rim International Conference on Advanced Materials and Processing
大学図書館所蔵 件 / 全2件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and index
内容説明・目次
内容説明
This work comprises edited versions of papers presented at the 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-6), held on Jeju Island, Korea between the 5th and 9th November, 2007.
目次
Improvements & Innovations in the Continuous Casting Process at POSCO
TiNi-Base and Ti-Base Shape Memory Alloys
The Recrystallization Behaviour of Nb Microalloyed Steels
Phase Transformation Rule, Microstructure and Properties of JG590 High Strength Steel
Effect of Initial Grain Size on the Dynamic Recrystallization Behaviours of Austenite
Microstructure and Mechanical Properties of Ni-Free High Nitrogen Austenite Stainless Steels Fabricated by Mechanical Alloying Method
Enhancement of Fatigue Strength of SAE 1045 Steel by Tempering Treatment and Shot Peening
Effect of Lower Final Rolling Temperature on Mechanical Properties of V-N Microalloyed Mild Steel
Effect of Reheating and End Cooling Temperature on Microstructure Refinement in a Low Carbon High Strength Nb-Ti Microalloyed Dual Phase Steel
The Comparative Effectiveness of Nb Solute and NbC Precipitates at Impeding Grain Boundary Motion in Nb-Steels
Microstructural Features of a Ultra Low Carbon High Strength Acicular Ferrite Steel Thick Plate
The Study of Inner Surface Crack Formation of Seamless Modified 9Cr-1Mo Tube Rolled on Mandrel Mill and Its Application
The Nanohardness of Acicular Ferrite and Bainitic Ferrite in Low Carbon Microalloying Steel
Crystallography of BCC Precipitates at Grain Boundary Corners in FCC Matrix
Slab Method Analysis and FEM Simulation on Rotating Compression Forming of Cylinder Considering Coulomb Friction
Effects of Ti and Nb Stabilization on the Recrystallization and the Pitting Potential in Fe-21%Cr Ferritic Stainless Steels
Effect of Intermittent Heating on Creep Behaviour of Advanced 9-12%Cr Power Plant Steels
Optimization of Residual Manganese in Molten Metal in Basic Oxygen Furnace (BOF)
Superplastic Deformation Behavior of Spray Formed High Speed Tool Steel at 820 DegreesC
Effects of Addition of V and Nb on in High Cr Ferritic Steels
Microstructural Characterization of Oxide Scale Formed by Early Stage of Oxidation of 17%Cr-Mn-Ni Austenitic Stainless Steel
Study on Susceptibility of Hydrogen Embrittlement in a Tool Steel
High Speed Deformation of Ultrafine Grained TWIP Steel
Precipitation Hardening in Fe-1.03%Cu Structural Steel
Mechanics of Asymmetric Rolling of Thin Strip with Effect of Work Roll Edge Contact
The Role of Deformation Twinning on Creep of Titanium Alloys
Industrial Application in 2014 T6 Aluminum Alloys Having High Corrosion and Weather Resistant by Anionic Resin Coating with Mirror Luster
Formation of a Recrystallized and Recovered Multilayered Microstructure in a Hybrid Aluminium Alloy
Effects of Sb and RE on the Solutionized Microstructure and Microhardness of Mg-6A1-1Zn-0.7Si Magnesium Alloy
Improvements in Strength and Electrical Conductivity in 7B04 Aluminum Alloy Pre-Stretched Thick Plates Via Low-Temperature Retrogression and Re-Ageing Heat Treatments
Influence of Structure and Ionic Radius on Solubility Limit in the Mg-Re Systems
Study on the In Situ SEM Tension Observation of E-A356 Alloys
Characterization of Intermetallic Phases and Planar Defects in Mg-Y-Zn Alloys
A Constitutive Equation Coupling the Grain Size during the High Temperature Deformation of Ti-6.62Al-5.14Sn-1.82Zr Alloy
The Influence of Process Parameters during Machining of Ti6Al4V Alloy
Long Term Creep Properties of a Die-Cast Mg-Al-Ca Alloy
Fundamental Research on Fatigue Properties of Closed-Packed Hexagonal Lattice Metal under Biaxial Stress
Precipitation Hardening Behavior of Al-4wt.%Cu Alloys Aged at Low Temperature under High Magnetic Field
Microstructural Refinement and Mechanical Property Improvements of Ti-5Al-1Sn-1V-1Zr-0.76Mo Alloy by Equal Channel Angular Extrusion Processing
Mechanical Properties and Press Formability of Mg Alloy Processed by Cross-Roll Rolling
In Situ Investigation of Orientation Changes during Heating of Extruded AZ31
Influence of Extrusion Temperature on Microstructure, Texture and Fatigue Performance of AZ80 and ZK60 Magnesium Alloys
Development of New Types of Magnesium Alloys Containing Sr or RE Elements
Structure and Mechanical Properties of Mg-Zn-RE System Alloys
Hydrogen Evolution Behavior in an Al-Mg-Si Alloy Affected by Hydrogen Embrittlement
Tensile Properties and Deformation-Fracture Behavior of Ti-6Al-4V Alloy at Cryogenic Temperature
Study on Al Alloy Surfaces Treated by Ion Beams
Determination of Sr Content in Mg-Sr Alloys Using Faas
High Temperature Tensile Properties of a Mg-8%Li Alloy Shear-Strained by Torsion Working and ECAP
Recycling of Mg-Al-Ca Based Alloy by Vacuum Distillation
Laser Rapid Forming of Ti-Ni Functionally Graded Alloy
Microalloying Effects of Ca, Ag, Ni and Zn on Mechanical Properties in an Mg-3mass%Y Alloy
Improvement of Strength and Ductility by Controlling PFZ with Microalloying Elements in Al-Zn-Mg Alloys
The Effect of Ag-Addition on Precipitation Sequence in Al-1.0mass%Mg2Si-Excess 0.4mass%Si Alloy
HRTEM Observation of Rod-Shape Precipitates in Al-Mg-Si-Ag Alloy Aged at 523 K
Research on Solution and Aging Treatment of Mg-7Zn-3Al Alloy
Effect of Processing Route on Microstructure and Texture Development in ECAP of Al-Ti Alloy
Effects of Homogenization Treatment on Mechanical Properties of Hot-Rolled AZ31 Magnesium Alloy
Fatigue in Ti-6Al-4V at Very High Cycles
3D Image-Based Modeling of Ductile Fracture in an Aluminum Alloy Using Synchrotron X-Ray CT Images
Fatigue Fracture Behavior of Mg-Zn-Y Alloys
Developments of Magnesium Alloys by Melt Stirring Method
HREM and HAADF Studies of Precipitates in the Mg-Y-Nd Alloy System
Microstructural Characterization and Temperature Analysis in Friction Stir Welding of A383/5052 Dissimilar Aluminum Alloys
First-Principles Calculation of Interaction Energies between Solutes and/or Vacancies for Predicting Atomistic Behaviors of Microalloying Elements in Aluminum Alloys
Influences of Rolling Conditions on Texture and Mechanical Properties of AZ31 Magnesium Alloy Processed by Differential Speed Rolling
Effect of Granule Size in Semi-Solid Slurry on Rheo-Extrusion of A7075 Aluminum Alloy
Influences of Hydrogenation on Microstructure and Microhardness of Ti6Al4V Alloy
Phase Analysis for Mg-Zn-Y Magnesium Alloys by Using Extraction Technology
HRTEM Observation of Precipitates at Early Stage of Aging in Mg-Gd-Zr Alloy
HRTEM Observation of the Age Hardening Precipitates in Mg-Gd-Sc Alloy
Changes in the Mechanical Properties and Microstructure of AZ91 Cast Mg Alloy Caused by Heat Treatment
Microstructure Sensitive Design and Quantitative Prediction of Effective Conductivity in Fuel Cell Design
Effects of Various Thermal and Environmental Exposure on the Mechanical Properties of Aluminum Alloys
Effect of Initial Microstructure under Different Solidification Conditions on Hot Working Behavior of AZ31 Alloy
Effect of TiH2 on the Microstructures and Refining Performance of Al-Ti-C Master Alloy
Solute Content and the Tensile Behavior of High Pressure Die Cast Mg-Al Alloys
Electromagnetic Stirring Processing and its Influence on Mechanical Properties of ZL102(or Al-Si) Alloy
Investigation of Streaking Defects on Aluminium Extrusions
Integrating Process, Material and Business Strategies to Transform a Small-Medium Aluminium Products Manufacturer
On-Line Aging to Improve the Tensile Strength and Conductivity of Cold-Drawing AA6201 Wires
From Angel Food Cake to Porous Titanium - A Novel Powder Metallurgical Approach for Metallic Foam Utilizing Food Processing and Ceramic Processing Techniques
Resistance of Thin Al Foam Panels to Deep Indentation
Preparation of the Al-Cu-Co and Al-Cu-Ni Ternary Intermetallic Powders via a Solid-Liquid Reaction Ball Milling Technique
Preparation of Ti-Al Intermetallics by Aluminum Melt Infiltration-Diffusion Annealing Technique
Oxidation Behavior and Pack Siliconized Oxidation-Resistant Coatings of an Nb-Based Ultrahigh Temperature Alloy
Microstructure and Mechanical Properties of Dual Multi-Phase Intermetallic Alloys Composed of Geometrically Close Packed Ni3X Structures
Development of a Second Generation TiAl Turbocharger
Microstructure and Deformation Behavior of Lamellar Ti-Rich TiAl Crystal with Lotus-Type Aligned Pores
Microstructures Evolution of a Ni-Base Superalloy after Long-Term Aging at 750 DegreesC
Effect of Third Elements on Pseudoelastic Behavior in Fe3Al Single Crystals
Strengthening and Ductilization of D03-Type Fe3Al Intermetallic Alloys by Dispersion of Laves Phases Fe2Zr and Fe2Nb
Mechanical Properties of Zr-Added Fe-Al Intermetallic Alloys Containing Large Second Phase Particles
Influence of Electrical Parameter on the Size of Superalloy Powders Prepared by Spark Plasma Discharge Process
Microstructure and Plastic Deformation Behavior of Ni3V Single Crystals
The Effects of Nb and Cr Addition on Mechanical and Chemical Properties of Cold-Rolled Ni3(Si,Ti) Intermetallic Foils
Microstructure and Mechanical Properties of In718 Alloy Produced with Twin-Scanning Atomizer
Dependence of Strain Rate and Environment on the Mechanical Properties of the Ni-19Si-3Nb-1Cr-0.2B Intermetallic Alloy at High Temperature
Effect of Isothermal Forging on Microstructures and Mechanical Properties of Nb-Si In Situ Composite
High Temperature Oxidation Behavior of MoSi2 under Low Pressure Atmosphere
Reliable Titanium Aluminide Texture Measurement Using EBSD
Phase Equilibria between -Fe (A1) and Fe2Ti Laves (C14) Phases and Microstructure in Fe-Ti-Ni Ternary System at Elevated Temperatures
Mechanical and Physical Properties of Ni3Al-Based Alloys with Cr Carbides Dispersion
Defect Generation in Some Transition-Metal Silicides in Accommodating the Deviation from the Stoichiometric Compositions
A 21st. Century Perspective on Molybdenum Powder Production by Hydrogen Reduction
Oxidation Behaviours of MoSi2 Single Crystal at the Temperatures of 773K and 1473K
Plastic Deformations in L10-Ordered Single Crystals with their c/a Ratios Less than Unity
Thermoelectric Properties of Ru2Si3-Based Chimney-Ladder Phases
Hydrogen Permeation Properties of Nb-Based Two-Phase Compounds
Modification of Ni-Cr-Co-Mo-Nb-Ti-Al Superalloy for USC Power Plant Application at Temperature above 750 DegreesC
Phase Equilibria and Atomic Diffusion in the Ir/CoAl System
Microstructures and Mechanical Properties of Ti-48Al-2Cr-2Nb-xW
Improvement of Strength, Weibull Modulus and Damage Tolerance of SiC
Hydrothermal Synthesis of Bi1.5ZnNb1.5O7 Nanopowders
Study of the Preparation Technology and Properties of BaBi4Ti4O15 Ceramics
Edge Effects in Sliding Wear Behavior of ZrO2-WC Composites and WC-Co Cemented Carbides
Study of Water-Debinding for Ceramic Parts by Injection Molding
Millimeter-Wave Assisted Sintering of Polycrystalline Yttria for Laser Host Material
Barium Titanate Nanopowders Prepared from the Modified Oxalate Co-Precipitation Method
Fabrication of Bi2-xSbxTe3 (x=0-1.5) Thick Film by Centrifugal Deposition
Synthesis of Ultra-Fine and High-Pure Zirconium Diboride Powders Using Solution-Based Processing
Simultaneous Synthesis and Consolidation of W-Added ZrB2 by Pulsed Electric Current Pressure Sintering and their Mechanical Properties
Silicon Nitride/Boron Nitride Composite by Combustion Synthesis
Grain Growth Behavior of Al2O3-ZrO2 with a Small Amount of Zirconia
Design of Mold Materials for Encapsulating Semiconductors Using Epoxy Molding Compounds
Fabrication Processes and Properties of Highly Pure MgAlON Materials
Development of Efficient Metal Catalyst Support
Microstructure and Electrical Properties of Calcium Copper Titanate Ceramics
Negative Thermal Expansion in Mn3Ga(Ge,Si)N Anti-Perovskite Materials
Wear Characteristics of Bulk Ti3AlC2 under Current-Carrying Conditions
Depth Selective Electronic State Analysis of Implanted Nitrogen in Visible-Light Response TiO2 Photocatalyst
Novel Aluminium Nitride Surface Coatings Formed on Aluminium
Densification and / Phase Transformation of SHS Si3N4 Containing Al2O3 and Y2O3 during Sintering
Zinc Oxide Ceramics with High Mobility as n-Type Thermoelectric Materials
Preparation and Characterization of -SiAlON Ceramics from High Aluminium Fly Ash via Carbothermal Reduction-Nitridation
XRD and HRTEM Study of Zirconia Nanoparticles Synthesized by Laser Ablation
Effect of Oxygen Partial Pressure on Electrical Conductivity of Ca-Ru-O Compounds Prepared by Spark Plasma Sintering
Spark Plasma Sintering of SiAlON-cBN Composite
Fabrication of Alumina and Silicon Carbide Fibers from Carbon Fibers
Fabrication and Electrical Property of SiC-AlN Composites
Effect of Calcination on Mechanical Properties of Hydroxyapatite / Zirconia Composite Sintered by Spark Plasma Sintering
Dielectric Properties and Microstructure of Nearly Zero Temperature Coefficient f of Forsterite Ceramics
Sintering and Performance of MgO-CaO Materials with Nano-Sized ZrO2 Addition
High Volume Fraction Carbide Reinforced Copper Matrix Composites for Sliding Contact Applications
Preparation of Silica Microcapsules Containing Phase Change Paraffin Wax
Online Wear Monitoring of Polymer Matrix Composites
Frictional Behavior of Glass Fiber Reinforced Polyester under Different Loads
A Pressured Steam Jet Approach to Tool Wear Minimization in Cutting of Metal Matrix Composites
Mechanical Properties Variation with Test Temperature for Liquid Phase Sintered 95W-3.5Ni-1.5Fe Alloys
Influence of Secondary Electro-Conductive Phases on Sliding Wear Performance of Zirconia Based Ceramic Composites
Metal Coated Functionalized Single-Walled Carbon Nanotubes for Composites Application
Effects of SiO2 Particles on Wear Behavior of Cu-SiO2 Dispersion-Hardened Alloys
Fabrication of Polystyrene Fibers Containing Nanoparticles of TiO2 and ZnO by Electrospinning
Surface Nano-Deformation Behavior in Particle-Reinforced Al Composite
Basalt Reinforced Plastics: Some Operating Properties
Effect of Boron on the WC Morphology in Sub Micron Tungsten Carbide-Aluminide Composites
Damping Capacities of B/Al Composite Subjected to Thermal-Mechanical Cycling
Synthesis of 1, 2-Aceanthrylenedione Catalyzed by Anhydrous AlCl3
Oxidation Behavior of Ti3SiC2-SiC Ceramic Composites
Effects of the Morphology of Silicon Phase on the Properties of Zinc Based Composites
Damping Characteristics of a NiMnGa/Polymer Composite Material
Chemical In Situ Synthesis of Aluminum Alloy Composites
A Study on Manufacture of SiCp/Fe Composites by Specimen Current Heating Hot Press Sintering
Synthesis and Mechanical Properties of Advanced Polyimide/Silicon Dioxide Nanocomposites
Structure of Natural Nano-Laminar Composites: TEM Observation of Nacre
Measurement of Strain and Stress Distribution of Composite Materials by Electron Moire Method
Rapidly Solidified Thick Deposit of Fe-B-Cr Alloy by Plasma Spraying
A Relation between Laboratory and Full-Scale Testing of Polyester/Polyester Composites under Static and Dynamic Load
Electrical Conductivity of VGCF/ Aluminum Composites Fabricated by Electro Spark Sintering
Mechanical Properties of Nano-Laminar Glass/Metal Composite
Study on Toughening Mechanism of Nano-Composite Ceramics Prepared by Mixed Coagulative Method
Fabrication of Structural Composite Accompanied with a Function of Thermoelectric Conversion
Microstructure and Properties of Porous CMCs Prepared by HIPing the Pyrolyzed ZrO2/ Si / Phenol Resin Composite
Study on In Situ Synthesized Titanium Matrix Composites
An Amendment Method for Stress and Strain of Double-Curved Laminated Composite
Tensile Behaviour of Nano-Particulate Reinforced Aluminium Matrix Composites at Elevated Temperatures
Effect of Aluminum Addition on Thermal Properties of Mg/SiCP Composites
Microstructure Control of Ceramic-Intermetallic Composites by Heat-Treatment before Combustion Synthesis
Enhanced Wear Resistance of CFRP Laminates via Carbon Nano-Particles Dispersed Surfaces
Flexural/Twist Anisotropy Influence on Elastic Instability of a Plate Composite Laminate
Bacteria-Templated Synthesis of ZnO Hollow Spheres via a Facile Hydrothermal Method
In Situ Synthesis of Hierarchical Nanocomposites Utilizing Redox-Active Biofibers by a Novel Biogenic Technique
The Effect of Matrix on the Mechanical Properties of Squeeze Cast Al - 50 % SiCp Composites
Dynamic Mechanical Thermal Properties of a New Metal/Polymer Composite for Fused Deposition Modelling Process
Strength Prediction for Jute Polyester Composite for Transverse Fiber Reinforcement
Numerical Analysis of Force and Power Parameters in Cold Ring Rolling
Microstructure and Mechanical Properties of the Spray-Deposited Al-10.8Zn-2.8Mg-1.9Cu Alloy at Various Aging Conditions
Subgrain Boundaries in ECAP Aluminium
Freeform Fabrication of Non-Metallic Objects by Selective Laser Sintering and Infiltration
Manufacturing Technologies for Small Lot Size, Short Cycle Time and Low Cost
Advanced Plastic Processing Techniques for the Densification of Spray Deposited Preforms
Effects of Friction on Precision Forging Process of Blade with a Damper Platform
Texture Aspects of Deformation Processes under Equal-Channel Angular Pressing of Metals
Development of Substructure Non-Uniformity under Equal-Channel Angular Pressing
Butt Joining of Dissimilar Sheets by Shot Peening
Formation of Ultrafine Grained Structure in SUS 304 Stainless Steel Produced by High Pressure Torsion (HPT)
Lining of Carbon Steel with Metal Foils by Shot Peening
Preparation of Homogeneous Fe-Al Intermetallic Compound Sheet by Multi-Layered Rolling and Subsequent Heat Treatment
A New Method to Produce Superfine and Nano-Sized Fe Powders: Spark Plasma Discharge Process
Preparing Semisolid Light Alloys by Vibrating Wavelike Sloping Plate Process and Thixoforming
Optimization of Particle Size and Distribution by Hydrostatic Extrusion
Synthesis of 3, 3-Biacenaphthene through Coupling Reaction of Acenaphthene Catalyzed by [Bmim]Cl/FeCl3 Ionic Liquid
Microstructures and Phase Transformations of Ti-50.9at%Ni Alloy Processed by Equal Channel Angular Extrusion at Medium Temperature
Effect of Shear Deformation on Deformed Microstructures of Austenitic Grains
Research on the Blank Selection in the Power Spinning Process of Parts with Transverse Inner Rib
The Study on the Microstructure Characters of Pure Iron during Cold Rolling by High Energy X-Ray Diffraction
Distortion Analysis of Aluminum Alloy for Sheet Metal Forming after Solution Treatment
Influence of Microshot Peening on Surface Layer Characteristics of Cold Tool Steel
Mapping of the Granular Flow during the Irreversible Deformation Processes in Spatially Extended Polycrystalline Systems
Fine-Grained Structure in Extruded Magnesium Alloy with Long-Period Stacking Order Phase
Microstructure and Mechanical Properties of Titanium Severely Strained by Means of Friction Roll Processing
Fabrication of Nanostructured Materials by Hydrostatic Extrusion: Advantages and Limitations
X-Ray Study on Mg-Sm Alloy Produced by HPT
Study on Warm Flow Compacted Tungsten-Based Alloy Powder for Cross-Shape Part
Semisolid Forging of Cast Iron Using Rapid Resistance Heating
Analysis of Deformation Textures and Microstructure in ECAE Processed Copper Single Crystals via Route C
Surface Features in Honing Zirconia Ceramics Using Fine Grains with Ultrasonic Assistance
Ultrasonic Spectroscopy and X-Ray Diffraction Study for ARB Aluminum
An Investigation on the Microstructure and Mechanical Properties of Mg-3Al-1Zn Alloy via Spray Forming
Research on Properties of SiCp/AZ61 Magnesium Matrix Composites in Fabrication Processes
Measurement of Cutting Temperature Using Wireless Sensing System
Application of PEG/PMMA Binder for Powder Injection Moulding of Hardmetals
Microstructure and Properties of Al-Zn-Mg-Cu-Mn In Situ High Strength Alloy
Mechanical Properties of Equal Channel Angular Extruded Magnesium Boride (MgB2) Powder in Tubes (PITs)
Relationship between Saturation Curve and Peening Parameters for Aerospace Shot Peening Process
Synthesis of Tin Oxide (SnO2) by Precipitation
Synthesis of Tin Oxide (SnO2) by the Oxalate Route: Effects of Addition Method and Ageing
Atomistic Studies of Deformation Mechanism of Nanocrystalline Al-Ti and Al-Fe Alloys from First-Principles
Coating with Supersonic Free-Jet PVD
Experimental Study of Grain Growth in Aluminium Melts under the Influence of Ultrasonic Melt Treatment
Unsteady-State Solidification under Forced Flow Conditions
Effect of Structure on Hot Tearing Properties of Aluminum Alloys
Microstructure and Mechanical Property of Al2O3/Y3Al5O12 (YAG) Eutectic Ceramic In Situ Composite Prepared by Laser Zone Melting
A Model for Lamellar-Rod Eutectic Transition
Influence of Processing Parameters on Interfacial Heat Transfer Coefficient at the Metal-Die Interface of Die Cast AM50 Alloy
Fracture Analysis of Superplastic Diffusion Bonding Joints between Titanium Alloy and Stainless Steel
3D Microstructure Development during Unconstrained Solidification of Aluminum Alloys
Study on Process of Magnesium Alloy Investment Casting
Control of Carbides and Graphite in Ni-Hard Type Cast Iron for Hot Strip Mills
Welding of Fine Metal Particles by Using a Tungsten Needle and Measurement of the Strength of the Joints
Intensifying Smelting Synthesis Technique of 2500m3 Blast Furnace
A Study of hBN-Y2O3 Composite Investment for Casting Ti-6Al-4V Alloy
The Analysis of the Blowing Process with the Top Lance of the Argon Oxygen Decarburization (AOD) in Baosteel
Joining of Aluminium Alloy and Mild Steel Sheets Using Mechanical Clinching
Synthesis of Ultrafine Particles of Iron and Iron Nitride by Evaporation of Iron in Gas Mixtures of Argon and Ammonia or Argon and Nitrogen
The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Laser Rapid Forming Ni-Based Alloy Rene88DT
Inhibition of Austenite Grain Growth by Particles and Solute Elements in Fe-0.05% C and Fe-10% Ni Alloys Deoxidized by Mn-Si, Ti, Mg, Zr and Ce
Microstructure and Mechanical Properties at the Unsteady Areas of Non-Linear Friction Stir Welding
Process and Practice of EAF with De-P Hot Metal Charging for Melting Stainless Steel
Rheological Transitions at Low Solid Fraction in Solidifying Magnesium Alloy AZ91
Liquid Metal Free Surface Motion Submerged in an AC Magnetic Field
Spray Forming of Al-Fe-Cr-Ti and Al-Si-Li Alloys
Enhanced Red Emission in Lithium Doped CaWO4:Eu3+ and CaMoO4:Eu3+ Phosphor
Microwave-Assisted Synthesis of Phase Pure YFeO3 Nanocrystallite
Photodegradation of Formaldehyde over Doped TiO2 Prepared by Hydrothermal Method under Visible Light Irradiation
Enhancement of Magnetocaloric Effects in Single Phase La1-zNdz(Fe0.88S 0.12)13
Characterization and Microwave Absorption of "Core/Shell"-Type Nanoparticles
Fabrication of Iron Oxide Nanostructures by Electron Beam-Induced Deposition
Effect of Mn Substitution on the Structure and Microwave Properties of Nd-Fe-B Nanocomposites
Onset Magnetic Field for Rearrangement of Martensite Variants in Ni2MnGa
Thermal Behavior of Electron Irradiation Defects in CZ-Si
Large Linear and Volume Magnetostriction in Fe-Ga Alloys
Improvement of Magnetic Characteristic in Spheroidal Graphite Cast Iron
Nano-Order Structural Analysis of White Light-Emitting Silicon Oxide Prepared by Successive Thermal Carbonization/Oxidation of the Porous Silicon
Microstructure of Anisotropic Nd-Fe-B Film Magnets Prepared by Pulsed Laser Deposition
An Actuator Laser of Optical Disk Drive High-Frequency Electromagnetic Vibrations Characteristic Analysis
Structural, Electrical and Magnetic Properties of Ni33Fe67 and Ni21Fe79 Films Deposited on SiO2/Si(100) at 633 K by DC Magnetron Co-Sputtering
Deposition of a Well-Adherent Nano-Crystalline Diamond Coating on Titanium Using CH4-H2 Gas Mixture
Nickel Metal Induced Lateral Crystallization of Patterned Amorphous Silicon Thin Film
Preparation of Chain-Like Carbon Nano-Tubes Film and its Field Emission Properties
Structural and Mechanical Properties of AlN Films by Pulsed Bias Arc Ion Plating
Structural Evolution Upon Annealing of Multi-Layer Si/Fe Thin Films Prepared by Magnetron Sputtering
Performance of Low Resistivity Electrode Prepared by Electroless Plated for Amorphous Silicon Thin-Film Transistors
A Splats Obtaining System for Thermal Spray Deposits
Investigation of Aluminum Content on the Properties of Sol-Gel-Derived Zinc Oxide Thin Films
Pulsed Closed Field Unbalanced Magnetron Sputtering (P-CFUBMS) Deposited TiC/a:C Thin Films
High-Performance Poly-Ge Thin-Film Transistor with NiGe Schottky Source/Drain
Investigation of Mechanical and Structural Properties of AlN Thin Films Prepared by Mid-Frequency Pulsed Magnetron Sputtering
A Study on Formability of a Polyimide Film by Using Visco-Elasticity Measurement and Hot-Embossing Tests
Growth and its Properties of GaMnN Film Based on ECR-PEMOCVD
Nanowire Fabrication of Silicon-Based Materials
Microstructure and Electrical Properties of Nano Ni-Cr Thin-Films Fabricated by Magnetron Co-Sputtering Techniques
Synthesis of Single-Walled Carbon Nanotube Networks on Silicon Nanowires
High Rate Growth of Highly-Crystallized Ge Films on Quartz from VHF Inductively-Coupled Plasma of GeH4 + H2
Characterization of Electronic Charged States of Nickel Silicide Nanodots Using AFM/ Kelvin Probe Technique
Effect of Reducing Thickness of TiN Buffer Layers on Epitaxial Growth of GaN Layes
Cracking of Aluminum Nitride Film on Stainless Steel Substrate at Elevated Temperature
Material Characteristics and Electrical Modeling of Ultra Thin Copper Oxides in ULSI Application
Polymer Thin Films Prepared by RF Magnetron Sputtering of PTFE on NiTi Alloys
Electrical Properties and Microstructures of Ultraviolet Transparent Ga2O3 Thin Films
Ultra-Large Area RF Plasma Sources Employing Multiple Low-Inductance Internal-Antenna Modules for Flat Panel Display Processing
Performance of Titanium-Tungsten-Silicon-Aluminum Based Coated Cutting Tools
XRR and SAXS Study of Hydrogenated Amorphous Silicon Oxycarbide (a-SiOC:H) Films
Microstructure of 430L Stainless Steel Powders during High-Energy Ball Milling
Size Controlled ZnO Nanoparticles Prepared by Water-in-Oil Microemulsion
Ab-Inito Data for Interatomic Interactions in Zr-Rich ZrCu Alloys and Embedded-Atom-Method Potentials
The Production and Elevated Temperature Properties of Ca65Mg15Zn20 Bulk Metallic Glass
Ternary Sm-Al-Co Bulk Metallic Glass Formation Designed Using a Cluster Line Approach
Viscous Flow Behaviors of Supercooled Liquids of Pre-Annealed Zr55Cu30Al10Ni5 Bulk Metallic Glasses
Cluster-Based Bulk Metallic Glass Formation in Co (-Fe)-Si-B-Nb Alloy Systems
Environment-Assisted Cracking of Zr-Based Bulk Metallic Glass
Density and Enthalpy Relaxation Behavior in a Bulk Pd40Ni40P20 Metallic Glass
Ultrasonic Attenuation Properties of Glassy Alloys in Views of Complex Viscoelasticity
Fabrication of Ni52.5Nb10Zr15Ti15Pt7.5 Bulk Metallic Glassy Matrix Composite Containing Dispersed ZrO2 Particulates by Spark Plasma Sintering
Plastic Deformation of Electrodeposited Nanocrystalline Ni-W Alloys at High Temperatures
Low Cycle Fatigue of Electrodeposited Pure Nanocrystalline Metals
Comparison of Mechanical Properties between As-Quenched and Annealed Metallic Glass Pd44Cu31Ni8P17
Small-Scale Resistance Spot Welding of Zr Based Glassy Alloys
Origin of Different Dependence of Apparent Glass-Forming Ability on Casting-Atmosphere-Pressure in Zr-Al-Ni-Cu-Pd Alloy System
Controlled Elasticity in Nano-Structured Metallic Glass by Ion Implantation Method
Hydrogen Production by Methanol Steam Reforming Using Amorphous Metal Membranes
Shear Banding Analyses of Amorphous Alloys with Crystalline Particles
Quasicrystallization of (Zr65Al7.5Cu27.5)95Ti5 Glassy Alloy
Effects of Addition of Al, Ti and Ag on Glass-Forming Ability of Cu50Zr50 Alloy
Solid Solution Formation Criteria for High Entropy Alloys
Glass Forming Ability and Thermal Properties of a Cu-Based Bulk Metallic Glass Microalloyed with Silicon
Microstructure and Mechanical Properties in Friction Stir Processed Zr-Al-Ni-Cu Bulk Metallic Glass
Structure of Zr-Cu and Zr-Ni Liquid Alloys Studied by High-Energy X-Ray Diffraction
Defect Structures in Al-Ni-Rh Crystalline Approximants Studied by HREM and HAADF Techniques
Microstructure of Rapidly Solidified Co-Sn-Ti and Co-Sn-Si Alloys
Fe-Metalloid Metallic Glasses with High Magnetic Flux Density and High Glass-Forming Ability
Development of the Ni-Based Metallic Glassy Alloys for PEFC Separator
Ultrasonic Properties of a Ti47.4Zr5.3Ni5.3Cu42 Glassy Alloy during Progressive Devitrification
Fabrication of the Bulk Amorphous Ni-W Alloy by an Electroforming Process
Characterization and Modification of Nanocrystalline Iron Oxide Powders Prepared by an Inert Gas Condensation Technique
The Effects of Size of Catalysts on the Morphology of Carbon Fibers
Raman Spectroscopic Characterization of Carbon Nanofibers Obtained by Using Metal Chloride as Catalyst Precursor
Structural Stability and Elasticity in Zr-Based Bulk Metallic Glasses
Carbon Nanotube Nano Composites for Multifunctional Applications
Pinpoint Nano-Crystallization and Magnetization in Fe-Nd-B Metallic Glass by Electron Irradiation
Unique Nano-Crystalline Structure Formation in Zr-Pd Metallic Glass by Electron Irradiation Technique
SiC Nanowires Synthesized by Microwave Heating
A Study of Testing the Nanocatalyst Decomposition Efficiency of Methanol (CH3OH) and Ethanol (C2H6O)
Synthesis of New Ni-Ta-Based Bulk Glassy Alloy with High Fracture Strength of over 3000 MPa
Synthesis and Consolidation of Nano-Sized NiCo Powder by Powder Technology Rout
Development of Amorphous and TiAl-Nb2Al Intermetallic Nanocomposite Powders by Mechanical Alloying
Phase Constitution and Heat Treatment Behavior of Zr-Nb Alloys
Preparation and Characterization of Natural Hydroxyapatite: A Comparative Study of Bovine Bone Hydroxyapatite and Hydroxyapatite from Calcite
Stress-Induced Lattice Transit Behavior in a Cold-Rolled Cu-Al-Mn Two-Way Shape Memory Alloy
Change in Material and Structural Parameters of Bone Mechanical Function during Long-Bone Regeneration
pH-Sensitivity of N-Carboxyethyl Chitosan Hydrogel and Drug Controlled Release In Vitro
Polarisation Behaviour of 316L Stainless Steel in Cell Culture Environment
Behavior and Preparation of Single Crystal of Cu-Al-Ni-Be SMA
A New Concept of Biomaterials to Induce Tissue Regeneration
Mechanical Behaviors of Ti-29Nb-13Ta-4.6Zr-XO for Biomedical Applications Subjected to Cold Working and Various Heat Treatments
Effects of Cross-Linkage and Hydroxyl Groups on Bonding Strength between Titanium and Segmented Polyurethane through 3-(Trimethoxysilyl) Propyl Methacrylate
Effect of Rotation Speed on Transformation Behavior in Ti-48at%Ni Shape Memory Alloy Melt-Spun Ribbon
Experimental Study of Stress Induced Martensite Transformation under Plane State of Stress
Corrosion Behavior of Zirconium Based Alloys in Simulated Body Fluids
Effect of Heat Treatment Temperature on the Mechanical Property in Cast TiNi Shape Memory Alloy
Effect of Iron Addition on Co-29Cr-6Mo Alloys for Biomedical Applications
Effect of Nitrogen on Microstructure of Porous CoCrMo Alloy Compacts for Biomedical Applications
Change in Tensile and Fatigue Properties of Biomedical Ti-29Nb-13Ta-4.6Zr Alloy Fabricated by Various Processings
Hard-Ceramic Layer Formed on Ti-29Nb-13Ta-4.6Zr and Ti-6Al-4V ELI during Gas Nitriding
Hydroxyapatite Formation on Calcium Phosphate Coated Titanium
Rolling Texture of "-Phase in Ti-22mol%Nb-3mol%Al Biomedical Shape Memory Alloy
Surface Modification of Titanium with Hydrothermal Treatment
Decomposition of a Biocompatible Zr-Ta-Nb Alloy
Nano-HA Coating on Titanium Surface Fabricated by Modulation of Self-Assembled Monolayer and Bovine Serum Albumin
Orientation Dependent Internal Friction of Textured Ti-Nb-Al Shape Memory Alloy
Catalytic Combustion Synthesis of Carbon Nanofibers
Martensitic Transformation of TiAu Shape Memory Alloys
New Developments in Extruded Magnesium Alloys for Structural Applications
Silk as Substratum for Cell Attachment and Proliferation
Enhancing the Bonding Strength of Plasma-Sprayed HA Coating on Pure Ti
New Mathematical Models for Effective Drug Diffusivity Estimation in 2D
Effect of Small Amount of Dopant on Phase Stability of Zirconia Bioceramics
Structure Control of Hydroxyapatite Using a Magnetic Field
Novel Waste Processing by Means of Mechanochemical Treatment
Hydrogen Storage Properties of FCC Type Mg-Transition Metal Hydrides Prepared by GPa High Pressure Method
Comparison between Mg/Cu Super-Laminates and Mg2Cu Powder in Microstructure and Hydrogen Storage Properties
Hydrogen Quasi-Chemically Trapped between Defective Graphene Layers in Nanostructured Graphite
Pt4ZrO2/C Cathode Catalyst with Excellent Durability for High Temperature PEMFC Based on H3PO4 Doped PBI
Phase Transition of Mg/Pd Laminate Composites during Hydrogenation/Dehydrogenation
Ammonia Synthesis Using Atomic Hydrogen Supplied From Silver-Palladium Alloy Membrane
Structural Characterization of D2 in Cu3(1,3,5-Benzenetricarboxylate)2 Using Neutron Powder Diffraction
Synergetic Effect of Oxides on Hydrogen Reaction Kinetics of Magnesium Hydride
Hydrogenation Characteristics of Mg Based Alloy Prepared by Super Lamination Technique
Degradation Properties of Hydrogen Storage Alloys and Change of Microstructure during the Degradation
The Alloy Design of Metallic Interconnector of Solid Oxide Electrolyte Fuel Cell (SOFC)
In Situ High-Resolution Observation for Decomposition of NaAlH4
Preparation and Hydrogen Storage Properties of Mg-Ni-B BCC Alloys
HRTEM Study of Nanostructures in Hydrogen-Absorbing Mg-Ni and Mg-Ni-La Alloys Prepared by Melt-Spinning
Thermoelectric Power Hydrogen Sensors for Reversible Hydrogen Storage Materials
Characteristics of Hydrogen Storage by Sn/MgH2 Nanocomposite Obtained by Mechanical Milling of MgH2 with Sn
Self-Propagating High-Temperature Synthesis of Porous Nickel-Titanium
Modeling of Mechanical Behavior of Porous Sintered Timing Wheel in Contact with Chain Wheels
Recycled Aluminum Alloy Matrix Composites with Artificial Pellets Made of Incineration Ashes
Processing of Nanoporous Gold by Dealloying and its Morphological Control
Influence of Density on the Compressive Properties in Porous Copper Produced by Spacer Method
Structural Analysis on Anisotropic Deformation Properties of Highly Porous Aluminum Material
Electro-Deposition for Foamed Zinc Material from Zinc Sulfate Solution
Fabrication of Low Temperature Foaming Glass Materials Using Hydrothermal Treatment
Three-Dimensional Zinc Mapping inside Aluminum Foams Using Synchrotron X-Ray Microtomography
Fatigue Strength of Lotus-Type Porous Magnesium
Whisker Initiation Behavior from Electrodeposited Sn/Cu Coating on Cu Leadframe
Processing and Mechanical Properties of Porous Titanium-Niobium Shape Memory Alloy for Biomedical Applications
Mechanical and Thermal Properties of Micro-Closed Cellular Materials Containing Different Materials from that of Cell Walls
Unusual Wetting Behavior of Liquid Metals on Porous Layer Formed at Surface of Iron Substrate Prepared by Oxidation-Reduction Process
Oxidation Behavior of Cu Nanoparticles and Formation of Hollow Cu2O Spheres
The Production Practice on Digesting Solid Wastes in Blended Material for Sinter
Fabrication of Functionally Porous Structures by the Sheet Lamination Method
Room Temperature Superplastic Deformation of Closed-Cell Zinc Alloy Foams
Physicochemical Properties of Carbons Prepared from Physic Nut Waste by Phosphoric Acid and Potassium Hydroxide Activations
Degradation Mechanisms of Pressure Vessel Internal Steel (18Cr-10Ni-Ti) Irradiated with Heavy Ions
Formation of Al-Based Intermetallic Compound under Ion Implantation at Lower Temperature
Fabrication of Cermet Nuclear Fuels Designed for the Transmutation of Transuranic Isotopes
Characterization of High Strength Alloy Formed by Ion Irradiation of Metallic Glasses
Corrosion Behavior of CLAM in Liquid LiPb Alloy at 480 DegreesC
Co Addition Effect on the Precipitation Behavior of Laves Phase in Fe-10Cr Ferritic Alloy
Application of Combustion Synthesis to the Production of Actinide Bearing Nitride Ceramic Nuclear Fuels
A Molecular Dynamics Study of Helium-Vacancy Clusters Production due to Cascades in -Iron
Formation of Defect Clusters in SrTiO3 Crystals Implanted with Xenon Ions
EXAFS Study on Irradiated ODS Ferritic Steel
In Situ TEM Observation of Precipitation of Zirconium Hydrides in Zircaloy-4 under Hydrogen Ion Implantation
Localized Deformation in Neutron-Irradiated Zirconium and Zircaloy-4
Effects of Neutron Irradiation and Thermal Aging on Mechanical Properties of ODS Ferritic Steels for Advanced Nuclear Systems
Fabrication and Evaluation of Plasma-Sprayed Molybdenum for Plasma Facing Materials
Experiment and FEM Simulation on Residual Stress of Cold Expansion Hole
Numerical Modeling of Microstructure Evolution and Dendrite Growth for Al-Si Alloy Casting during Low Pressure Die Casting
Material Structure Simulation Techniques and Applications
A Simplified CA Method for Simulating the Microstructure of Magnesium Alloy Components
Numerical Simulation on the Liquid Metal Flow of the Acceleration Phase in the Shot Sleeve of Cold Chamber Die Casting Process
Phase Field Modeling of Recrystallization Grain Growth during Re-Aging Process in Cu-Ni-Si Alloy
An Anisotropic Model for the Plastic Response of Powder Compacts
Simulation of Cold Ring Rolling Based on Rate Dependent Crystal Plasticity
Gas Velocity Measurements of Close-Coupled Atomizers
New Expression of the Chemical Bond in Perovskite-Type Oxides
Numerical Modeling of Scale Dependent Mechanical Properties of Metal Polycrystals
Crack Tip Dislocations and its Shielding Effect
First-Principles Studies on Grain Boundary Energies of [110] Tilt Grain Boundaries in Aluminum
Study on Dynamic Measurement of Thermal Stress during Solidification of a Casting Specimen
Use of Taguchi Method to Study a Robust Design for H-Sectioned Porous Beams during Rolling
Experimental Investigation of Isotropic and Kinematic Hardening in Al-3Cu-0.05Sn (wt%)
The Effect of Transformation Plasticity on Prediction of Tooth Distortion of Heat-Treated Helical Gear
Iterative Modification of Lumped Heat Capacity Method on Predicting Residual Stress and Distortion of Still-Quenched S45C Steel Cylinder
Surface Energy of In-Doped ZnO Studied by PAW+U Method
The Motion of Dislocation in Iron Pinning by Carbon Interstitials
Parameter Identification of Thermal Visco-Plastic Model Considering Dynamic Recrystallization
Effect of the Guide-Roll Positional Angle to the Stability of Radial Ring Rolling
Numerical Simulation of Compacting Process of Green Sand Molding Based on Sand Filling
Precise Rolling Force Calculation for the Tandem Cold Mill
Study on the Simulation of Grinding Based on Virtual Reality Technology
Finite Element Modeling the Effect of Pressing Temperature and Temperature Rise on ECAE Process of CP-Ti
Improved FE Modeling of Center Crack Occurrence in Tube Rounds during Two-Roll Rotary Rolling Process
Thermodynamic Analysis of the Fe-Mn-P Ternary Phase Diagram by Combining the First-Principles and CALPHAD Methods
3-D FE Simulation and Analysis on Radial-Axial Large Ring Rolling
Ab Initio Lattice Dynamics and Thermodynamics of MgS and Related II-VI Semiconductors in Zincblende Structure
Numerical Simulation and Optimisation of Sheet Metal Forming for Auto-Body Panel Using AutoForm Software
Stacking Fault Energy of Cu-Ga Alloys from First Principles
Modeling and Experimental Observation of the Plastic Anisotropy and Damage of CP-Ti during Multi-Pass ECAE
Point Defects in L10 Phase FePt Alloy: A First Principle Study
Cosmic Micromechanics Connection with Irreversible Deformation Processes in Spatially Extended Crystalline Systems
The Thermal, Mechanical and Electronic Properties of Nanoscale Materials: Ab Initio Study
Phase Field Calculations with CVM Free Energy within Square Approximation
The Study of Undercooling of Homogeneous Nucleation for Metallic Melting
Study on the Wrinkling and Edge Irregularity during Bending of a Roll-Formed Plate
Optimization of Bending Process of Large Marine Crankthrow by Computer Simulation
Physical Modeling on Recrystallization of Austenite in Steels in Thermo-Mechanical Processing
Nonlinear Steady Temperature Fields in Non-Homogeneous Materials
Mathematical Simulation of Billet Profile during Spray Forming Process
The Effect of Solidification Models on the Prediction Results of the Temperature Change of the Aluminum Cylinder Head Estimated by FDM Solidification Analysis
First Principles Study of Point Defects in Uranium Dioxide
Modeling of Contact Pressure in Sheet Metal Forming
Stability of Crystallographic Orientations in Equal Channel Angular Extrusion of HCP materials: Application to Texture Analysis in Titanium
Atomic Simulations on the Grain Subdivision of a Crystalline Metal
Heat and Mass Transfer in the Process of EB Penetration
Numerical Modelling of Spray Formed Grain Size Evolution
Development and Application of the Finite Element Analysis Program of the Stress-Based Forming Limit Criterion for Sheet Metal Forming
Optimum Cooling Channels Design and Thermal Analysis of an Injection Moulded Plastic Part Mould
Extraction of Elastic Modulus and Hardness of the Soft Metallic Films on Hard Substrates by Nanoindentation
Characterization of Precipitates by Three-Dimensional Electron Tomography
Study of the Early Stages of Recrystallization in a Cold Rolled ELC Steel Using FIB-EBSD Tomography
Determining the Surface Properties and Inherent Properties of Solid Materials Using Material-Independent Indentation Technique
Direct Observation of Nanostructural Fluctuation during Radiation-Induced Amorphization
Reciprocating Friction and Wear Behavior of WC-Co Based Cemented Carbides Manufactured by Electro-Discharge Machining
Sulfide Precipitations in Steel and its Role of a Residual Level of Copper
Stress Distribution in Be Compact Tension Specimen
Effect of Structure and Morphology on Photo-Oxidation Degradation of Polyethylene
Physical Aging and Creep Behavior of Poly(Methyl Methacrylate)
Structural Characterization of Cu50Zr45Ti5 Glassy Alloy under Thermal Annealing and Electron Irradiation
Effect of Mg Content on the Precipitation in Al-Mg-Ge Alloys
Effects of Transformation Stress and Deformation before Austenitization on Nucleation of Intragranular Bainite
Growth and Characterization of Pb(Mg1/3Nb2/3)O3 Crystals by a Single-Step Low-Temperature Process
Creep Characterization of Power-Law Materials through Pseudo-Steady Indentation Tests
Variation of Hardness with Microstructure Evolutions in Metastable Titanium Alloy TIMETAL (R)LCB
The Relationship between the Bending Direction and Burgers Vector of Threading Dislocations at a Coherent Heterointerface in AlGaN/AlN Layers
Electron Holography on Charging Effect in Non-Conductive Materials
Physical Properties of Li2Pd3B and Li2Pt3B Superconductors
Characterization of Nano-Scale Particles in Hot-Rolled, High Strength Low Alloy Steels (HSLA)
"In Situ-Tracking" Observation of Stainless Steel Microstructural Development during Elevated Service Using EBSD and SEM
Site-by-Site Electronic Structure Analysis of Al-Containing Complex Compounds Using Channeling EELS and First Principles Calculations
X-Ray Reflectivity Studies of Pt/AlN Multilayered Films
Stoichiometric Study of Iron Sulfide Prepared by Mechanochemical Reaction
Effect of Shot-Peening on Fine Grain Steel
A Study on the Microstructure of Ultra Low Carbon Bainitic Steels by RPC Technique
In Situ Analysis of Phase and Magnetic Transformation Process in Fe-Pt Nanoparticles
Effect of Isothermal Aging on the Growth and Morphology of the Intermetallic Compounds Formed at the Solder/Cu Interface of the Lead - Free Solder Joint
Microstructural Stability of Duplex Stainless Steel Weldments
Investigation of Phase Composition in Dense and Porous Gelcast Alumina Sintered under Argon Atmosphere
Thermal Degradation and Kinetic Characterizations of Jatropha Waste under Isothermal and Dynamic Experiments
A Characteristic of Spherical Indentation Curve and its Application in Measuring Material Properties
Transmission Electron Microscopy Studies of Oxidation of Single Crystal Silicon Carbide at High Temperature
Corrosion Behavior of Pure Titanium Produced by MIM Process under SSRT Condition
Electrochemical Dissolution Characteristics of Magnesium Alloy Produced by Roll Compaction Process
Evaluation of Corrosion Resistance of WC-Co Based Alloys inH2SO4
Crystallographic Analyses on Cracks Initiated by Rolling Contact Fatigue in High Carbon Chromium Bearing Steel
Particle Size Characterisation of Tin Oxide (SnO2) Precipitated by Various Techniques: Consistency of Data
Preparation and Characterisation of TiO2 Thick Films Fabricated by Anodic Oxidation
Preparation and Characterisation of TiO2 Thick Films Fabricated by Electrophoretic Deposition
Preparation and Characterisation of TiO2 Thick Films by Gel Oxidation
An Investigation of TiO2 Thin Film in Dye Sesitized Solar Cells by Electrophoresis Method
A Study on Dynamic Stability of the Fe3O4 Magnetorheological Fluid
High Cycle Fatigue Behavior of Thermally Oxidized Ti6Al4V Alloy
Fast and Non Destructive Technique to Characterize Thin Film Porosity: Example on Cubic Mesoporous TiO2 Thins Films
Determination of Material Constants for Crack Size-Dependence Crack Growth Model
Acoustic Emission as Analyzing Tool for Wear Mechanisms of Composite Materials
Heating Effects in WC-Co Cemented Carbides as a Result of Reciprocative Dry Sliding Friction
Fatigue and Damage Testing Rubber with Steel Cord Materials Combined
Transition Method of Geometrically Similar Element to Calculate the Stress Concentration Factor of Notch
Multi-Scale Modeling of the Corrosion of Metals under Atmospheric Corrosion
Cyclic Deformation of Al-Mg Single Crystals with a Single Slip Orientation
Creep Damage Evaluation by Hardness in Advanced High Cr Ferritic Steels
Thermoelastic Analysis of Crack Propagation in AA6082 Friction Stir Welded Joints
The Method of Torsional Cylindrical Shaft with Annular Notch in Quadric Coordinate
Investigation of Deformation Gradients in Surface Zone of Mechanically Surface Treated CuZn30
Analysis of Creep Deformation Process of Heat Resistant Steels Using Positron Annihilation Lifetime
A Combination of Mathematical Morphology and Thermal Analysis of Wear Debris Explaining Polymer Sliding Mechanisms
An Investigation on Failure Analysis of Titanium Gas Turbine Compressor Blades
"In Situ-Tracking" Evaluation for Corrosion Progress at Fusion Boundary of Dissimilar Steel Welded Joints in H2S Containing Solution
Characteristics of Electrical Discharge Pulse Sound for Hammering Test
The Influencing Factors and Assessment Rule of Fatigue Life of Shaft Based on Product Lifecycle Management
Safe Decomposition of Asbestos by Mechano-Chemical Reaction
Three-Dimensional Finite Element Modelling of Laser Shock Peening Process
Effect of Different Surface Treatments on Fatigue Life of NiTi Wires
Numerical Simulation of Microstructural Evolution during Aging of Cu-Ni-Fe Alloys
Precipitation in Aged N-Containing Austenitic Stainless Steels
A Theoretical Model for Digestive Ripening
Design of Structure, Composition and Heat Treatment Process for High Strength Steel
Phase-Field Simulation of "(D022) Precipitation in Ni Base Superalloys
Preparation and Thermal Property of Phase Change Material Microcapsules by Phase Separation
Metastable Precipitates and their Misfit Strains in a Cu-0.9wt%Be Single Crystal
Growth of Individual Austenite Grains Measured with 3DXRD Microscopy
HRTEM Observation of '-Phase in Cu-40.26 at.% Zn Alloy
Interfacial Structural Modification of Martensitic Transformations
Shape Memory Behavior of Ti-50.9at%Ni Alloy after ECAE Processes
A Study of the Microstructural Evolution and Strengthening Effects of Non-Spherical Precipitates in an Al-Cu-Based Alloy
Mechanical Properties of Cu-4.0wt%Ni-0.95wt%Si Alloys with and without P and Cr Addition
Specimen-Size Dependence of the Martensitic Transformation Temperature of Yttria Doped Zirconia
Phase Diagram and Precipitation Behaviour in Ni-Rich Region of Ni-Ta-Al Ternary System
Effect of Magnetic Field on Isothermal Martensitic Transformation in SUS304L Stainless Steel
Relation between Diffuse Scatterings and Fermi Surface Nesting in Iron Doped Ti-Ni Alloys
Textures in AZ31 Magnesium Alloy Induced by Repeated Cross Wavy Rolling
Influence of Repeated Quenching After Carburizing on Prior Austenite Grain Size
Femtosecond Laser Synthesis of Polymorphic Diamond from Highly Oriented Pyrolytic Graphite
Hydrogen Diffusivity and Permeability In Pd50-xTi50(Cr, Fe)x Alloys
Two-Phase Microstructures Formed by Phase-Separations of Ordered Precipitates in Fe-Si-V Alloys
TEM Observations of Two-Phase Microstructure Formed by Phase Separation of Gamma-Prime Precipitates in Ni-Al-Si Alloys
TEM Observations of Precipitation of Coherent L12 and D022 Ordered Phases in Ni-V-Ge Alloys
Phase Transformations in the Metallic Materials Being Electrodeposited and their Application for the Development of Advanced Technologies for Anticorrosive Protection of Canned-Food Steel Sheet
Development of Nanocrystalline Copper-Refractory Metal Alloys
Surface Microstructure and Corrosion Resistance of 316L Stainless Steel after High Current Pulsed Electron Beam Treatment
Intergranular Corrosion of Ultrafine Grain Copper Fabricated by ECAP
Improvement of Surface Roughness on ABS 400 Polymer Using Design of Experiments (DOE)
Fatigue Life Enhancement by Surface Coating of Ni/Cu Multilayered Films
Dependence of Vickers Hardness on Annealing Temperature at Co/Cu Multilayered Films
Influence of Surface Finishing and Binder Phase on Friction and Wear of WC Based Hardmetals
Subsurface Microstructure Induced by Sliding Wear in a Copper Single Crystal
The Influence of PtFe and Nano Aluminium Particles on the Anticorrosive Performance of Waterborne Coating
Sensitivity to Fatigue Cracks Initiation of Symmetrical <110>Tilt Grain Boundaries in Pure Copper Bicrystals in 1M NaNO2 Solution
An Overview of Cold Spray Technique
Structural and Electrical Properties of ZnO Films on Freestanding Thick Diamond Films
TEM Characterization of 2 Tilt Grain Boundary in Alumina
Effect of Surface on Recrystallization
First-Principle Study of Sulfur Adsorption on Ir(100) Surface
Thermodynamic Processes and Phenomena Induced by High Current Pulsed Electron Beam
Surface Characteristics and Corrosion Behavior of Ti-4Al-2V Alloy Implanted with Al and Nb
Study of Metal Coating on Lead-Free High Refractive Index Glass Prepared from Local Sand
Tribological Properties of Ni/Cu Multilayers
The Surface Analysis of Melted Arc Copper Beads
Characterization of Coating Morphology and Heat-Resistance in Plasma Electrolytic Oxidation of Magnesium Alloy
Dislocation Structure Analysis of Low Angle Tilt Grain Boundaries in Alumina by Elastic Theory
Atomic Force Microscopy of Sintered and Thermoplastic Polyimide Surfaces after Macroscopic Wear Tests
Effects of Laser Processing Parameters on Grain Boundary Character Distribution and Corrosion Resistance of Austenite Stainless Steel
Surface Layer Hardness of Austenitic Stainless Steel via Low Temperature Plasma Carburizing and/or Nitriding
Interfacial Microstructure of Titanium Nitride - Titanium Diboride Composite Synthesized by Hot Shock Compaction
Investigation on Fatigue Crack Growth Behaviour in S45C Steel by Water Cavitation Peening with Aeration
Deformation Induced Ferrite Transformation in Microalloyed Steels: Theory and Application
「Nielsen BookData」 より