Aluminium materials
Author(s)
Bibliographic Information
Aluminium materials
（Materials science forum, v. 546-549 . Progress in light metals,
Trans Tech Publications, c2007
- set
Related Bibliography 3 items
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and index
Description and Table of Contents
Description
This immense 4 volume set comprises 495 peer-reviewed papers, divided into four parts: Magnesium (Part 1), Aluminum Alloys (Part 2), Aerospace Materials (Part 3) and Superconducting and Functional Materials (Part 4).
Table of Contents
New Perspectives for Wrought Magnesium Alloys
Automotive Mg Research and Development in North America
State of the Art in the Refining and Recycling of Magnesium
Research and Development of Processing Technologies for Wrought Magnesium Alloys
Overview of CAST and Australian Magnesium Research
Development of Magnesium Alloys with High Performance
Effects of Microstructure and Partial Melting on Tensile Properties of AZ91 Magnesium Cast Alloy
Effect of Heat Treatment on the Microstructure and Creep Behavior of Mg-Sn-Ca Alloys
Creep Behaviour and Microstructure of Magnesium Die Cast Alloys AZ91 and AE42
Growth Rate of Small Fatigue Cracks of Cast Magnesium Alloy at Different Conditions
A Cyclic Stress-Strain Constitutive Model for Polycrystalline Magnesium Alloy and its Application
Dynamic Stress-Strain Behavior of AZ91 Alloy at High-Strain Rate
Microstructure Evaluate System of Semi-Solid Forming
Zr-Containing Precipitates in Mg-3wt%Nd-0.2wt%Zn-0.4wt%Zr Alloy during Solution Treatment at 540 DegreesC
Microstructure, Mechanical Properties, Creep and Corrosion Resistance of Mg-Gd-Y-Zr(-Ca) Alloys
Effects of Er on Microstructure and Mechanical Properties of Mg-Zn-Er-Zr Magnesium Alloys
Microstructure Simulation of Die Casting AZ91D Alloy
A Novel Squeeze Casting Process for Producing Magnesium Wheels
Effective Protection of Magnesium Melt Surface from Oxidation Using HFC125-Containing Shielding Gas
Development of a -Type Mg-Zn-Al Alloy: An Investigation of the Microstructure and Solidification Characteristics
Ultrasonic Treatment of Magnesium Alloy Melts and its Effects on Solidification Microstructures
Microstructure Simulation of Magnesium Alloy
Effect of Sc on Microstructures and Corrosion Properties of AZ91
Microstructure of AZ91D in Different Treatment Conditions
Low-Cycle Fatigue Behavior of Three Die Cast Magnesium Alloys
Compression Deformation Behavior of AZ91D Magnesium Alloy in Semi-Solid State
Effects of CaCO3 Modificator on Microstructure and Mechanical Properties of Cast AZ91 Magnesium Alloy
Microstructure and Mechanical Properties of Mg-Gd-Sm-Zr Alloy
Mechanical Properties and Creep Behavior of Mg-Gd-Y-Zr Alloys
Microstructure and Mechanical Properties of Low Pressure Die Cast AM50 Magnesium Alloy
Tensile and Compressive Creep Behavior of Coarse-Grained Mg-Al-Sr Castings
Influence of Cooling Rates on the Dentrite Morphology and Hardness of the Surface-Chilled Mg-10Gd-3Y Magnesium Alloy
Effect of Si, Sr Additions on Microstructure and Mechanical Properties of AZ91 Alloy
Effects of Al-Sr Master Alloys on the As-Cast Microstructure of the AZ31 Magnesium Alloys
The Microstructure and Mechanical Properties of Mg-8Zn-8Al-4RE Magnesium Alloy
Effects of Aluminum Content on the As-Cast Microstructure and Mechanical Properties of Mg-xAl-0.7Si Based Alloys
Change of Inclusion and Mechanical Properties of Magnesium Alloy during Vacuum Melting
Effect of RE Content on the Fracture Behavior in Mg-Gd-Nd-Zr Alloys
Microstructure and Precipitates in Mg-Zn-Y Alloys
Study on Electromagnetic Vibration Casting (EVC) of Magnesium Alloys
Influence of RE on Microstructure and Mechanical Properties of Mg-Li-Al Alloys
Effects of Non-Flux Purification on the Microstructure and Mechanical Properties of AZ31+xCa Mg Alloy
A Constitutive Model for Casting Magnesium Alloy Based on the Analysis of a Spherical Void Model
Microstructures and Mechanical Properties of Mg-Li-Zn Alloys as Processed by ECAE
Microstructural Characterization and Mechanical Behavior of an Mg-9%Li-1%Zn Alloy
Effect of Grain Size on Necklace Formation of Magnesium Alloys
Elevated Temperature Mechanical Behavior of Mg-Y-Zn Alloys
Microstructures, Tensile Properties and Forming Process of AZ31 Alloy Sheets
Effect of Temperature on Microstructure and Texture during Compression of AZ31
Effect of Second Phase on the Mechanical Properties of Mg-Al-Zn Alloy by Equal Channel Angular Extrusion
Microstructure Evolution and Mechanical Properties of an AZ61 Mg Alloy through Cyclic Extrusion Compression
Effects of Extrusion on the Mechanical Properties and Damping Capacity of Mg-1.8Cu-0.5Mn Alloy
Fracture Mechanism Analysis of Mg-9Gd-4Y-0.6Zr Alloy
Annealing Behavior of the Compressed AZ31 Magnesium Alloy with Different Strain
Compressive Deformation of Cast AM60B Mg Alloy at Elevated Temperatures
The Experimental Research on the Formability of Stamping of Magnesium Alloy AZ31B Sheets
Thermo-Mechanical Coupled Simulation of Warm Stamping of AZ31 Magnesium Alloy Sheet
Experimental Research on Warm Deep Drawing of Magnesium Alloy Sheet by Variable Blank Holder Force Control
Numerical Simulation of Magnesium Alloy AZ31B Sheets with Thermal Deep-Drawing Process
Influence of Deformation on Precipitation and Recrystallization in an AZ80 Magnesium Alloy
A Preliminary Analysis on Compression Twins in Magnesium
Effect of Nd on Microstructures and Properties of AZ31 Wrought Mg Alloy
Mechanical Properties of Mg-8Zn-4Al-xCa Extruded Magnesium Alloy Tube at Elevated Temperature
Influence of Rolling Temperature on Microstructure and Tensile Properties of AZ31 Sheets
Effect of Second-Phase Particles on Grain Refinement of Mg-Al-Zn Alloy during ECAE
Effect of Cooling Rate on the Microstructure and Mechanical Properties of ZK60 Alloy
Microstructure and Mechanical Properties of Extruded Mg-Zn-Gd-Based Alloy Reinforced by Quasicrystals and Laves Phase
Development and Validation of Extrusion Limit Diagram for AZ31 and AM30 Magnesium Alloys
Warm Hydroforming of Magnesium Alloy AZ31 Sheets
Superplastic Behavior of an Extruded Mg-Zn-Y-Zr Alloy
The Fatigue Crack Propagation (FCP) Behavior of the Forged Mg-Zn-Y-Zr Alloy
Texture Evolution in Rolled Mg-13wt%Li-X Alloy
Annealing Process Optimization of a ME Wrought Magnesium Alloy
Effects of Homogenization on the Formability of ZM21 Alloy
Status and Development of Magnesium Alloy Thin Strip Casting
Rolling of AZ31 Magnesium Alloy Thin Strip
The Influence of Zinc and Zirconium on the Microstructure of the As-Cast Magnesium Alloy ZK60
Hot Compression Deformation Simulation of AZ61B Magnesium Alloy
Effect of Rolling and Annealing on the Mechanical Properties and Microstructure of AZ31 Magnesium Alloy
Study on Solidification Microstructure of AZ31 Alloy Strips by Vertical Twin Roll Casting
Superplastic Forming Limit and Instability of AZ31B Sheet
Effects of Zn on Mechanical Properties of MZK60 Wrought Alloy
Phase Analysis of Al-Mn Compounds in the AZ Magnesium Alloys
Microstructures and Mechanical Properties of AZ31B Extruded Sheets from Different Casting Processing
Effect of Hot Extrusion, Hard Drawing and Heat Treatment on Properties and Structure of MB5B Wrought Mg Alloy
Effect of Temperature and Relative Humidity on Fatigue Crack Propagation Behavior of AZ61 Magnesium Alloy
Effect of Nd and Y Addition on Microstructure and Mechanical Properties of Extruded Mg-Zn-Zr Alloy
Diffusion Bonding of Magnesium, Zirconium and Titanium as Implant Material
Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant
Aging Behavior of Mg-9Gd-4Y-0.6Mn Alloy
Preparation of Amorphous Mg-Ni Alloy by Mechanical Alloying and Investigation on its Hydrogen Storage Properties
Study on the Microstructure and Mechanical Property of High Strength Mg-Nd-Zn-Zr Alloy
On the Infiltration of Fiber Reinforced AZ91D Alloy
The Cathodic Reduction Processes of SiO2 Impurity in Magnesium Electrolysis
Expulsion in Resistance Spot Welding of AZ31B Magnesium Alloy
The Thermodynamics Calculation of Mg-Zn Alloy
A Database Prototype of Magnesium Alloy Based on Internet
Microstructure and Electrochemical Properties of Mg2Ni Substituted by Al, Ti
Biocompatibility Evaluation of Magnesium-Based Materials
Preparation of Mg-Sr Alloys Using Vacuum Reduction: A Thermodynamics Approach
Study on the Process and Mechanism of Rolling-Bonding between Magnesium and Aluminum
Nickel Foam Reinforced AZ91 Magnesium Alloy
EXAFS Study of Annealing Effects on Mg65Cu25Gd10 Metallic Glass
Interaction between Carbon Nanotube and Mg Surface: Ab-Initio Investigation
Mechanical Behavior of Gas Tungsten Arc Surface Modified Composite Layer on Mg Alloy AZ31 with SiCp and Aluminum
Intermediate Phase Growth of Mg-Al Diffusion Couple under a Strong Static Magnetic Field
Application of G-L Dislocation Model in Low Frequency Damping Capacities of AZ91D and SiCw/AZ91D Composites
Processing, Microstructure and Mechanical Properties of SiCp/AZ91 Mg Matrix Composites Fabricated by Squeeze Casting
Microstructure and Mechanical Properties of New Particle-Disperse-Reinforced Mg Composite Mg- 6Al- 3B2O3- 1NaCl- 1CaCl2
Measurement of Press Creep Stress Exponent of ZM6 Alloy at Room Temperature
Surface Modification of AZ91 Magnesium Alloy
Magnesium Films Deposited on Different Substrates via Arc PVD Method
Corrosion Protection of Joining Areas in Magnesium Die-Cast and Sheet Products
Effects of Post Heat Treatment on the Interfacial Characteristics of Aluminum Coated AZ91D Magnesium Alloy
Effect of Aging on Electrochemical Behavior of T6-Treated WE54 Mg Alloy
In Situ Observation of Initial Corrosion of AZ91 Alloy with Residual Stress in Wet-Dry Conditions Using Environmental Scanning Electron Microscope
Growth and Microstructure of Microarc Oxidation Coating on Al18B4w/AZ91 Mg Matrix Composite
Effect of Pulsed High Energy Electron Beam on Surface Modification of AZ91 Magnesium Alloy
Ion Implanted AZ31 Magnesium Alloy
Rare Earth Conversion Coating of Magnesium Alloy AZ91D
Effect of Heat Treatment on Corrosion and Electrochemical Behaviors of Mg-3Nd-0.2Zn (wt.%) Magnesium Alloy
Effect of CeCl3-Containing Flux on Microstructure and Mechanical Properties of Mg Alloy Containing Rare Earth
Effect of Strontium on Mechanical Properties and Corrosion Resistance of AZ91D
Application of Electrochemical Techniques to Characterization of the Corrosion Behaviors of GW63 Alloys
A Comparison on Ceramic Coating Formed on AM50 Alloy by Micro-Arc Oxidation in Two Electrolytes
Characteristics of Acoustic Emission during Fatigue of As-Rolled AZ31B Magnesium Alloy
Comparison of Coating Properties by Two Pulse Modes on Magnesium Alloy
Establishment of a Model of Growing Anodizing Film on AZ91D Mg Alloy
Zn Coatings on AZ91D Magnesium Alloy Prepared by Electroplating from the Electrolyte Containing SnO2 sol
Study on Phosphating on the Magnesium Alloys
Surface Modification of Magnesium with Rare Earth Conversion Films for Biomedical Protection
Fluidity Evolution of an Al-10%B4C Metal Matrix Composite
Effect of Mg Content in Matrix on Infiltration Height in Producing MgO/Al Composite by Vacuum Infiltration Method
Modification of A3003 Alloy for Development of High Toughness Al Alloy Tube
Effect of Si on As-Cast Microstructure in Quasicrystalline Al-Cu -Fe Alloy
Study on the Erbium Strengthened Aluminum Alloy
Microstructural Evolution in Al-Sc and Al-Sc-Zr Alloys
Damping Properties of 6063Al/Al2O3 SiO2 Particle Reinforced Composites
Microstructures and Dynamic Compression Properties of a High Reinforcement Content TiB2/Al Composite
Interfacial Reaction in Al Matrix Composites Reinforced by Mg Borate Whisker
Effect of Silicon Addition and Thermal History on the Thermal Expansion Behavior of SiC/Al Composites
The Influence of Interfacial and Structural Parameters on the Elastic Modulus of SiCp/6066Al Composites
Microstructural Characterization of Sprayed Aluminum Matrix Composites Reinforced by SiC Particles
Effect of Current Density on Morphology and Corrosion Resistance of Anodized Coating on SiCp/2024 Al Composite
Effects of Temperature on the Weldability of Powder Metal Parts Joined by Diffusion Welding
Microstructure and Performance in Diffusion Welded Joints of Al +5-10-15% WCp Composites
Application of Microstructure Sensitive Design to FCC Polycrystals
Coating Effect on Increasing Mechanical Property of 6061-T651 Alloy by Laser Shock Processing
Numerical Analysis of Nano- or Micro-Crystalline Materials during ECAP by Dislocation Evolution Method
Low-Frequency Electromagnetic Field Influencing Horizontal Direct Chill Casting of Aluminum Alloy Rods
New Method and Experimental Study for Fast Evaluating Filling Mould Ability of Al-Si Alloy by Surface Tension
Prediction of Fracture in Square-Cup Forming of Aluminium Alloy
Numerical Modeling of Low Frequency Electromagnetic Casting of 7XXX Aluminum Alloys
Micromechanism of Plastic Deformation on Elastic Modulus
Homogenization Treatment of an Al-Li-Cu-Mg-Mn-Zr Alloy
Influence of Pulse Electric Current on Solidification Structures of Al-Si Alloys
Rheological Behavior and Thermo-Mechanical Coupling Analysis of Aluminum Continuous Roll Casting Process
Numerical Simulation on Conform Process of Aluminum Alloy Rectangular Hollow Conductor
3-D Coupled Fluid-Thermal Finite Element Analysis of 3C-Style Nozzle's Fluid Field of Al Roll-Casting
Friction and Wear Properties of Friction Stir Welds of 5052 Al Alloy
Hot Deformation Behavior of 2519 Al Alloy during Isothermal Compression
Microstructure and Grain Refining Performance of a Rapidly Solidified Al-5Ti-1B Master Alloy
Effect of Calcium Addition and Heat Treatment on the Al-Zn-In Alloys as Sacrificial Anode
Accumulative Roll-Bonding (ARB) of Sheets of Aluminium and its Commercial Alloys AA8006 and AA5754 at Ambient and Elevated Temperatures
Overview of Recent Work on Precipitation in Al-Cu-Mg Alloys
Correlation of Mechanical Properties with Defect Structure in Commercial Pure Al and Al-Mn Alloys Studied by Positron Annihilation Spectroscopy
Morphological Changes and Plume Deflection Effect during Pulsed Laser Ablation Deposition of Al
Microtexture Development and Flow Stress Saturation during Triaxial Forging of an Al-3Mg-Sc(Zr) Alloy
Removal of Na and Ca from Aluminum Scrap through Filtration
Evolution of Micro-Textures within Individual Grains in Rolled Polycrystal Aluminum
Investigation of Inhomogeneous Deformation on Meso-Scale with Crystal Plasticity Finite Element
Atomic Bonding and Properties of Al-Li Alloy in Earlier Ageing Stage
Study of Cu Addition on Precipitation Behaviors and Mechanical Properties in AA6082 Al-Mg-Si Alloy
Effect of a Si Additive on an Al Grain Boundary: A First-Principles Investigation
Numerical Simulation on Influence of Clearance and Friction on Wrinkling in Bending of Aluminum Alloy Rectangular Tubes
Small Angle X-Ray Scattering Study in Equal-Channel Angular Pressed 7055 Al Alloys
Effect of Cryogenic Treatment on Mechanical Properties and Microstructures of 3102 Al-Alloy
Influence of Ageing Treatment on Microstructure and Properties of 7150 Alloy
Effect of Second Phases on Tensile Property in Artificial Ageing and RRA Process of Super-High Strength Aluminum Alloy
Effect of Minor Sc and Zr on the Fatigue Properties of Al-Mg-Mn Alloy
Aging Characteristics of 7A52 Al-Zn-Mg Alloy
Structure and Property of Nickel-Modified Ultrahigh Strength Al-Zn-Mg-Cu Alloy by Spray Forming
Optimizing Solution Heat Treatment to Improve Mechanical Properties of Al Alloy 7055
Prediction of Hardness of Aluminum Alloy 7055 by Quench Factor Analysis
Shear Pressing for Grain Refinement of Al-Mg-Li Sheet
Particle-Stimulated Nucleation of Recrystallization for Grain-Size Control in 01420 Al-Li Alloy
3D FEM Simulation of Void Growth in Aluminum Single Crystals
Effect of Trace Element Er on Al-Mg and Al-Mg-Mn Alloys
Investigation on Wear Resistance of Al-Si-Ti Piston Alloys Produced by Electrolysis
Cracking Susceptibility and Joint Property Study of the 6061 Aluminum
Grain Refinement of an Al-Cu-Mg Alloy by Microalloying and Common Thermo-Mechanical Treatment
Effects of Electromagnetic Pump Casting on Microstructure and Mechanical Properties of ZLSi9Mg Casting Aluminum Alloy
Microstructure and Thermal Stability of Al-Mg-Mn Alloys by Equal Channel Angular Pressing at Elevated Temperature
Morphology and Distribution of in Al-Fe Alloy under an Alternating Magnetic Field
Effects of Titanium Refining Methods on the Microstructure and Mechanical Properties of A356-0.1%Ti Alloys
Alloying Behavior of Rare-Earth Er in Al-Cu-Mg-Ag Alloy
Modifying Effect of Al-Ti-C-P Master Alloy on Hypereutectic Al-Si Alloy
Effect of Low Frequency Electromagnetic Field on Microstructures and Macro-Segregation of Direct Chill Casting Al-19.2%Si Alloys
Through-Thickness Microstructure, Texture and Strength Gradients in AA 7055 Rolled Plate
Influence of Scandium on Microstructures and Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloys
Evolution of Flow Stress and Microstructure in an Al-Zn-MgSeries Alloy during Hot Deformation
Effect of Extrusion Temperature and Rate on Formability and Microstructure of 7075 Aluminum Alloy
Characterization of Precipitation in Al-Zn-Mg-Cuand Li Containing Al-Zn-Mg-Cu Alloys after Isothermal Aging
Observation of As-Cast Microstructure Feature of Al Sheet Used for Can Manufacturing with High Forming Properties
Metallographic Characterization of Porosity in A Cast Aluminum Alloy A356-T6
Microstructures and Mechanical Properties of an Al-Cu-Li-Mg-Zr Alloy Containing Zn and Mn
Effects of High Gradient Magnetic Fields on Solidified Structures of Non-Magnetic Metals with Different Susceptibilities
Correction of Ghost in Reduced ODF with Particle Swarm Optimization Algorithm
HRTEM Analysis of Aging Electrolytic Low-Ti Al Alloy
Effect of Yb Additions on Microstructures and Properties of High Strength Al-Zn-Mg-Cu-Zr Alloys
The Effects of Thermo-Mechanical Treatment on the Properties of 2519 Aluminum Alloy
Characters of Coarse Grains Subdivisions in Rolled Polycrystalline Al
Microstructural Evolvement of Al-1.5Si-1.1Mg-0.5Cu Alloy Ingot during Homogenization Treatment
Performance of Electromagnetic Purification System in Continuous Twin Roll Casting of Aluminum Sheet
Microstructure Inhomogeneities in 2519A Aluminum Plate Penetrated by an Incendiary Projectile
Magnetically Aligned Al3Ni Phase in Al-Ni Alloys Solidified with a High Magnetic Field
Dynamic Recrystallization of 3104 Aluminum Alloy during Isothermal Compression Deformation at Elevated Temperatures
Investigation of Flow Stress Behavior and Microstructural Evolution of 7050 Al Alloy
Influence of Zr on the Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy
Tensile Properties of Large Extrusion and Forgings of RS P/M Al-9Fe-1.9Mo-1.7Si Aluminum Alloy
Study on Microstructural Evolution and Age Hardening in High-Purity Al-Cu-Mg-Ag Alloy
Flow Field and Gas-Bubble Size Analysis in Water Model for the Process of Aluminum Melt Degassing by Particle Image Velocimetry
Corrosion Behavior of Metallic Materials in Ethanol-Gasoline Alternative Fuels
Structural Characterization and Corrosion Properties of BTESPT Silane Films on Surface of 2024-T6 Aluminium Alloy
Effect of Pre-Rolling Reduction on Intergranular Corrosion of Aluminum Alloy 2519A
Influence of the Nickel on the Corrosion Behavior of Al-Mg-Sc-Zr Alloy
Thermal Stability of Nanocrystallized Surface Layer in Al-Zn-Mg Alloy by Surface Mechanical Attrition Treatment
Surface Morphology and Discharge Channel Temperature Estimation of PEO Ceramic Coatings on Aluminum
Effects of HTCA on Microstructure and Surface Morphology of Porous Anodic Alumina Membrane
Structure and Properties of Microarc Oxidation Films on Zinc-Containing Aluminum Alloy
Anti-Oxidation and Anti-Corrosion Properties of Al-Si Metal Anodes
Corrosion Behavior Improvements of High Active Aluminum Alloy Anode in Alkaline Solution by Adding Inhibitors
Exfoliation Corrosion Behavior of 2524 Aluminum Alloy
Liquation Cracking in Heat Affected Zone in Ni Superalloy Welds
The Future of Commercial Air Transport and Aeroengines: Challenges and Opportunities
French Research and Development Activities on High-Performance Superalloys for Gas Turbine Components
Atomic Partitioning of Platinum and Ruthenium in Advanced Single Crystal Ni-Based Superalloys
Effect of Ru on Microstructure of a Single Crystal Nickel-Base Superalloy
Effects of Ru Additions on the Microstructures and Stress Rupture Life of a Directionally Solidified Ni-Based Cast Superalloy
Influence of Ru and Cr on the Heat-Treated Microstructure of Ni-Based Superalloys
Dislocation Deformation Mechanisms during Fatigue of the Nickel-Based Superalloy CMSX-4
Temperature Dependence of High-Cycle Fatigue Behavior of a Ni-Base Single Crystal Superalloy
Microstructure Evolution and Strain Features of a Single Crystal Nickel Base Superalloy during Tensile/Compression Creep
Surface Recrystallization and its Effect on Rupture Life of SRR99 Single Crystal Superalloy
Precipitate Free Zones along Recrystallization Grain Boundaries during Creep in a Directionally Solidified Superalloy
Influence of Aging Temperature on the Microstructure and Stress Rupture Property of DZ951 Alloy
Effect of Temperature on Formation of Borides in TLP Joint of a Kind of Nickel-Base Single Crystal Superalloy
Stress Rupture Properties of the Second Generation Single Crystal Superalloy DD6 after High Temperature Exposure
Isothermal Oxidation Behavior of Ni Base Superalloy DM02 for High Temperature Dies
Effect of Alloying Elements on Microstructure and Mechanical Properties of High Temperature Die Material DM02 Alloy
Development and Characterization of Overspeed and Cyclic Behavior of Dual Grain Structure Turbine Disks
INCONEL Alloy 783: An Oxidation Resistant, Low Expansion Superalloy for Gas and Steam Turbine Applications
Development of New Generation Turbine Disk Superalloys in the HTM21 Project
High Temperature Structure Stability Study on Nb-Containing Nickel-Base Superalloys
The Studies of Non-Equilibrium Grain Boundary Segregation in Ni-Base Superalloy
Investigation on Dynamic Recrystallization Behavior in Hot Deformed Superalloy Inconel 718
Degeneration of Primary MC Carbide in a Cast Ni-Base Superalloy
Optimization of Nd:YAG-Laser Welding Process for Inconel 718 Alloy
Femtosecond Laser Ablation of a Single Crystal Superalloy CMSX-4 in Different Environments
Research on Sheet Metal of a New Ni-Based Superalloy Prepared by EB-PVD
Quantification of High Temperature Strength of Nickel-Based Superalloys
Optimisation of Spray Forming Ni Superalloys via Process Modelling and On-Line Monitoring
Interface Energy Calculation of - ' in Ni-Al System Using the Cluster Variation Method
Density of Ni-Co-Al Ternary Alloys in Liquid States Measured by a Modified Pycnometric Method
Tensile Creep Behaviors of a P-Type Structure Single Crystal Nickel-Base Superalloy
Phase Transformation in Binary Titanium-Base Alloys with Metals of the I, IV VIII Groups
High Fugacity Hydrogen Effects in Beta-21S Titanium Alloy
Finite Element Analysis on Superplastic Blow Forming of Ti-6Al-4V Multi-Sheets
Hydrogen's Absorption/Desorption Behavior in Gaseous-Phase Charged Duplex-Annealed Ti-6Al-4V Alloy
Research on Semi-Solid Deformation and Forging Behavior of Ti14 Alloy
Mechanical Properties and High Temperature Deformation of Beta Titanium Alloys
Hot Deformation Behavior and Microstructure Evolution of Ti-6.5Al-1.5Zr-3.5Mo-0.3Si with an Equiaxed + Starting Structure
In Situ AFM Observation of Mechanical Behavior of Beta Titanium Alloy in Nano-Indentation Test
Microstructural and Mechanical Characterization of TiAl/Ti6242 Diffusion Bonds
Study on Combustion Synthesis and Densification Process for Titanium Diboride and Iron Layered Materials
Predeformation Effects on Shear Response and Microstructure in Pure Titanium-TA2
Hydrogen Behavior in GTA Welded Ti-6Al-4V and Beta-21S Aerospace Applicative Titanium Alloys
A Novel Canning Technology for Forging of Gamma-TiAl Alloys
Mechanical Property and Elastic Modulus of Metastable Ti-Nb Based Alloys with Si Addition
Influence of Rapid Solidification on the Microstructure and Mechanical Properties of NiAl-Based Near Eutectic Alloys
Study on Fracture Behavior of -TiAl Based Alloys
Effect of Heat Treatment on Microstructure and Mechanical Properties for a Ni3Al Base Single Crystal Alloy DDIC6
Microstructure Evolution of Ti-Al Peritectic System during the Initiated Stage of Directional Solidification
Theoretical Prediction of Ternary Site Occupancies in ZrCr2 and NbCr2 Laves Phases
First-Principles Study on Initial Oxidation of NiAl(110)
Study of Hot Deformation Characteristics of an As-Cast Ti-22Al-25Nb Alloy
NiCr-CrAl Coating for Ni3Al Base Alloy IC6AE
A First Principle Study of the Effect of Nb on the Oxidation Behavior of NiTi Alloy
Effects of Nb on the High Temperature Mechanical Properties of TiNiAl Alloys
Effect of Mo on the Oxidation Behavior of NiTiAl Alloy
Effects of Cr and Al on High Temperature Oxidation Resistance of Nb-Si System Intermetallics
Effect of B on the Microstructures and High Temperature Oxidation Resistance of a Nb-Si System In Situ Composite
Study on Interface Reactions between Nb-Si System In Situ Composite and Ceramics
Preparation and Mechanical Properties of C/C-SiC Composites
Fabrication of AlN-SiC-TiB2 Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing
Room and Elevated Temperature Mechanical Properties of Hot-Pressed Uni-Cf/SiO2 Composite
In Situ Composites: Effect of Intermolecular Hydrogen Bonds on Polyamide 66/TLCP Blends
Effect of Needling Parameters on Mechanical Properties of C/C Composites Reinforced by Carbon Cloth
Effect of Silica on the Electrical Properties of Epoxy of Phenolic Resin/Carbon Black/Silica Composite Coating
Effects of Interphase Thickness on Damping Behavior of 2D C/SiC Composites
Study on Tensile and High Cycle Fatigue Properties of TiC Particle Reinforced Titanium Matrix Composite
Use of WEDM in the Characterization Process of Al/2-Phase Systems Consolidated by Multilayer Cylindrical Dynamic Compaction Method
Effect of Ozone Treatment on the Interfacial Properties of High Modulus Carbon Fiber/Epoxy Composites
Light Weight and High Modulus Aluminum Matrix Composite and its Application into Aerospace
Finite Element Analysis of Interfacial Debonding Damage in Fiber-Reinforced Ceramic Matrix Composites
Preparation of AlN-BN Composite by Composite Powders
Distortion Simulation of Unsymmetrical Composite Laminates Using the Finite Element Analysis Method
Design of a Deployable Antenna Actuated by Shape Memory Alloy Hinge
Effect of Electrochemical Treatment on the Surface Structure and Tensile Strength of Carben Coated CVD SiC Fiber
Optimum Design, Microstructure and Mechanical Properties of Ti/Ti3Al Multi-Layered Materials
Studies on Thermal Property of Silica Aerogel/Epoxy Composite
Acoustic Emission Research on Thermal Shock Behaviors of Three-Dimensional C/SiC Composites in Different Environments
A Finite Element Model and Experimental Verification for the Mechanical Properties of 2.5-D Braided Composites
Microstructural Characterization and Properties of SiC/Al Composites for Electronic Packaging Fabricated by Pressureless Infiltration
Optimization of Radar Absorbing Structure Using the Genetic Algorithm
Modification of Diallyl Isophthalate with Dimethacrylate Liquid Crystalline
Reaction Mechanisms of Combustion Synthesis of Si3N4 -SiC -TiN Ceramics
Microstructures and Toughening Mechanisms of Y2O3 Doped Al2O3/ZrO2 Eutectic Composite Ceramics Prepared by SHS Melt-Growth Process
Investigation on a Novel Low Temperature/Vacuum Bag Cure Prepreg
Kinetics of Interfacial Reaction in SiCf/Ti6Al4V Composites
Effect of Mo on Properties and Microstructure of Steel-Bonded Cemented Carbide GT35 Produced by In Situ Reduction of Ilmenite
Internal Friction Behaviors of TiNi Shape Memory Alloy Fiber/Ni Matrix Composite
Quantitative Analysis on Fracture Mechanism of Al Melt Oxidatively Infiltrated SiCp/Al2O3-Al Composites by XPS
Study on the Vibration of a Sandwich Beam with Smart Composites-MRF
Effects of Particle Size on Microstructure of the Matrix Alloy in Aluminum Matrix Composites
Mechanical and Microwave Dielectric Properties of Csf/Si3N4 Composites
Pores in PAN-Based Carbon Fiber and Effects of Pore Defects on Mechanical Properties
Tactile Display Based on Controllable Fluid Actuator
Structural Optimization Design of MR Fluid Clutch
In Situ Measurement on the Pressure and Resin Flow in Hot Press Process of Composites
Advanced Graded Protective Coatings, Deposited by EB-PVD
Effect of Hf Addition on High Temperature Properties of Ir-Containing Alloy Coatings
A Comparison of the Mechanical Properties of RF- and DC- Sputter-Deposited Cr Thin Films
Formation and Characterization of the Quasicrystal Films
Suspension Development for Electrophoretic Deposition of Mullite Coating
Oxidation Behavior and Residual Stress in Thermally Grown Oxides of Detonation and High Velocity Oxygen Fuel Sprayed NiCrAlY Coatings
Thermal Cycling and Hot-Corrosion Behavior of Plasma Sprayed Segmented Thermal Barrier Coatings
Influences of Argon Atmosphere on Ceramic Coatings on Ti-6Al-4V Alloy by Micro-Plasma Oxidation in Different Solutions
Development and Oxidation Resistance of Si-Modifide MCrAlY Coatings on Nb-Base Alloy
Optical Absorption Properties of Nanotitanium Dioxide Doped ZnO/Silicone Thermal Control Coating
Ti-N-C Films Deposited by Ion Beam Assisted MF Twin Targets Unbalanced Magnetron Sputtering
Microstructure Evolution of Nd2O3 and Yb2O3 Co-Doped YSZ Thermal Barrier Coatings during High Temperature Exposure
Influence of NiCoCrAlY and Diffusion Aluminide Coating on Oxidation and Hot Corrosion of a Ni-Based Superalloy
Evaluation of Tribological Properties of a Cathodic Arc Ion-Plated CrSiN Coating under Both Unlubricated and Boundary-Lubricated Conditions
Electrochemical Corrosion Behaviors of Ti2AlNb with Double Glow Plasma Surface Chromized
Visible-Blind Metal-Semiconductor-Metal Structured Deep-Ultraviolet Photodetectors Using Single-Crystalline Diamond Thin Film
Corrosion Properties of Inconel Alloy 600 Coated by Simultaneous Aluminizing-Chromizing Process
Microarc Oxidation Coatings Fabricated on Ti3Al-Based Alloy in Silicate Electrolyte
Magnetron Sputtering High Temperature Mo-Al2O3 Cermet Solar Selective Coatings
Hf Modified NiAl Bond Coat for Thermal Barrier Coating Application
Effects of EB-PVD Process TGO Formation and Growth within Thermal Barrier Coatings
Long-Term Oxidation Resistance of (Ti,Al,Y)N Coatings at 800 DegreesC
Numerical Analysis of EB-PVD Thermal Barrier Coatings under Thermal-Mechanical Coupled Environment
The Effects of Rare Earth Elements on Corrosion Resistance of Sol-Gel Coatings for 2024 Aluminum Alloy
Structure and Anti-Corrosion of Tri-Layer Ni-P Amorphous Alloy Coating Prepared in the Same Bath
Study on Interfacial Characterization and Mechanical Properties of Plasma-Sprayed Tungsten Coatings
Preparation of High Silicon Steel by EB-PVD
Melting Temperatures of Several Oxides under Pressure
Effects of Ti-1023 Anodized Coating on Corrosion Behavior of Ti-1023/30CrMnSiA and Ti-1023/LY12 Galvanic Couples
Tiny Crystals Surviving above the Melting Temperature and Acting as Growth Nuclei of the High-Tc Superconductor Microstructure
High-Strength Nb3Sn Wire Development for Compact Superconducting Magnets
Development of Ag-Sheathed Bi2223 Tapes with Interfilamentary Resistive Barriers for Reducing AC Losses
Coated Conductor: Some Critical Aspects from Substrate to Device
Artificial Nano-Scale Precipitates for Flux Pinning in YBa2Cu3O7- Thin Films and Coated Conductors
Continuous Deposition of Buffer Layers for YBCO Coated Conductor Using Reactive Magnetron Sputtering
New Cu-Ni Substrate for Coated Conductors
A New Series of Potential Buffer Layers for REBCO Coated Conductor
Influence of Oxygen Partial Pressure on the Microstructures and Critical Current Densities of PMP-Processed YBCO Bulks with Submicron Y2BaCuO5 Particles
Effect of Ultrafine Gd211 on Processing and Superconducting Properties of Gdbacuo Bulk Superconductors
Effect of Temperature on La1.85Sr0.15CuO4 Single Crystal Growth by Floating Zone Method
Neutron Diffraction Studies of the Zr/Nb Effects on the Nb3Sn Phase Formation of Monofilament Wires
Critical and Irreversibility Temperature Study of Internal-Sn Nb3Sn Superconducting Wires
Effect of Heat Treatment on Superconducting Properties of Pure and Ti, Zr-Doped MgB2 Superconducting Wires Fabricated by In Situ PIT Method
MgB2 Superconducting Films Fabricated on Copper Substrate by Hybrid Physical-Chemical Vapor Deposition
Transverse Compressive Stress Effects on the Critical Current of Bi-2223 Tapes
Round Multifilament Bi-2212/Ag Wire Development for High Field Magnet Applications
Finite Element Analysis of Quench Propagation Velocity in Bi-2223/Ag Superconducting Multifilamentary Tape
High Magnetic Field Superconducting Magnet Technology and its Applications
A New HTS/PMG Maglev Design Using Halbach Array
Ground and Excited States of the Two and Three Dimensional Bipolaron in a Quantum Dot
Study on the Relation between Electronic Structure and Tc for Cuprate Superconductor Systems
The Progress on Study of Isotope Effects in High TC Copper Oxide Superconductors
Study on the Precursory Powder for Bi-2223 Tape
Influences of Preparation Conditions on Melting and Reformation Behaviors of (Bi,Pb)-2223 Core in the Ag-Sheathed Tape
Influence of Sheath Materials on the Strain Tolerance of Bi-2223 Superconducting Tapes
Bending Strain Effects on the Critical Current of Bi-2223 Superconducting Tapes by Pure Bending Method
HTS High Q Resonant Controller
Study on Minimum Propagation Current of Bi-2223/Ag Superconducting Multifilament Tape
Electrical Properties of a High-Tc Superconductor-Polymer Compersite
Research of Secondary Gel Technic to Synthesize Bi2Sr2CaCu2Oy Superconductor
Influence of Processing Parameters on the Texture Formation in Powder Metallurgic Ni-5at.%W Substrate Tapes
Textured YBCO Films Derived from Low-Fluorine-Content Solution
Preparation of YBCO Superconducting Films by Sol-Gel Process
Epitaxial Growth of CeO2 Buffer Layers on Both YSZ Single Crystal and Textured Ni5W Substrates by MOD Method
Investigation Texture in Ni-W Alloy Substrates for Coated Conductors
Te Substitution Effect in Low-Dimensional Superconductor NbSe2-xTex (x = 0, 0.1, 0.2)
Effects of Heat Treatments on the Nb3Sn Composite Strands
Deposition of MgB2 Thin Films on Nb Substrates Using an In Situ Annealing PLD Method
Influence of Preparation Process on Microstructure, Critical Current Density and Tc of MgB2/Fe/Cu Wires
Influence of Mg and B Stoichiometry on the Formation Behavior of MgB2 Phase
Comparative Studies of Nanoscale SiC Whisker and Si/N/C Doped MgB2 Tapes
Effect of Thickness on Properties of MgB2 Thin Films
MgB2 Films on Nb Substrate and its Bending Test
Effects of Nano-Al Doping on Superconductivity and Microstructure of MgB2 Bulk Superconductors
Improvements on the Properties of the In Situ MgB2/Fe Tapes Annealed by Spark Plasma Sintering Technique
Effect of Pulsed Magnetic Field Processing on MgB2 Superconductors
MgB2 Thick Film Grown on Silicon Carbide Substrate by Hybrid Physical-Chemical Vapor Deposition
Solution Phase Synthesis of Superconducting La2CuO4 Microspheres
The Effects of BaF2 Addition on Melt-Processed YBa2Cu3O7-x Superconductors
Levitation Capability of a Bulk YBa2Cu3O7-x with NdFeB Guideway by Two Magnetization Methods
Crystal Growth Mechanism of YBCO Superconductors Prepared by Unidirectional Solidification Method
Analysis on the Ceasing Mechanism of the YBCO Crystal Growth during Melting Growth Process by Unidirectional Solidification
Study of the Phase Formation of Sol-Gel YBa2Cu3O7-x Samples in Flowing Oxygen Atmosphere
Effect of Magnet Moving Speed on the Relaxation Rate of the Levitation Force for YBCO Bulk
Effect of the Moving Speed between Magnet and Superconductor on the Levitation Force of Single-Domain YBCO Bulk
Performance of Gd-Ba-Cu-O Superconductor Bulks with Ultrafine Gd2BaCuO5 Powders Prepared by Low-Temperature Combustion Synthesis
Basic Analysis of Magnetic Field in High Temperature Bulk Superconductors
Ionic Cluster Effect in Suppression on Superconductivity in Doped Y123
Simultaneous Substitution of Y and Ba by Ca in YBCO
Microstructures and Mechanical Properties of Porous Ti51Ni(49-x)Mox Shape Memory Alloys
Structure, Magnetization and Magnetostriction of Sm(Zn1-xTx) (T=Fe, Co) Alloys
Effects of -Ray Irradiation on Structure and Properties of ZnO:Al Thin Film
Advanced Giant Magnetostrictive Alloys and Application in Actuators for Active Vibration Control
Microstructure and Pseudoelasticity of Ti-Nb-Si Based Alloys with Biocompatible Alloying Elements
Preparation and Properties of Ceramic Tiles for Heat Insulation
Preparation of FeCoZrBCu Thin Films and their Effect of Microstructure on Magnetic Properties
Magnetic and Transport Properties of Mn-Si Films Synthesized on 4H-SiC(0001) Substrates
Electrochemical Fabrication of BixTe1-x (0.4 x 0.7) Nanowire Arrays
Crystallographic Texture of MgO and its Effect on the Growth of BaTiO3 Thin Films by RF Sputtering
Sintering of -Si3N4 Powder Prepared by Self-Propagating High-Temperature Synthesis (SHS)
Fuzzy Dynamic Model of a Giant Magnetostrictive Actuator
Molecular Dynamics Study of the Structure in Vitreous Silica with COMPASS Force Field at Elevated Temperatures
Study of a Ceramic Thermocouple for Al Production
Adaptive Vibration Control on Six Degree-of-Freedom Magnetostrictive Smart Structure
Magnetostriction and Hysteresis of (Tb,Dy,Ho)Fe2 Alloys
The Growth Mechanism of Quasi One-Dimensional ZnO Nanostructures Synthesized by Carbon Reduction without Catalyst
Low-Temperature Sintering and Dielectric Properties of (Zn1-xMgx)TiO3
Giant Magnetostrictive Material Actuator Based Active Vibration Control-a Modified - LMS Algorithm
Study of the Structure and Magnetic Properties of Fe/Cu Superlattices from First-Principles
Comparative Study of Recovery Strains in Severely Cold-Deformed NiTi
Influence of Carburization on Mechanical Behaviors of NiTiCu Alloy under Dynamic Impact Loading
Fluorinated Acrylic Films: Effect of F Content on Aging and Corrosion Testing
Heusler Type CoNiGa Alloys with High Martensitic Transformation Temperature
Design and Modal Analysis of Fast Magnetostrictive Steering Mirror
Modeling Rate-Dependent Hysteresis for Magnetostrictive Actuator
Effects of Annealing on Phase Transformation and Mechanical Behaviors of NiTi Shape Memory Alloy Ultra Thin Sheet
Mechanical Properties and Shape Memory Effects of TiNiNb Shape Memory Alloys with Low Niobium Content
Density and Mechanical Strength of Ferrite for Inertial Gyroscope
Synthesis and Low Temperature Magnetic Properties of Metal Elements Filled Polymer-Derived SiCN Ceramic Composites
Micro-Pore Structure and Mechanical Properties of High Temperature Self-Lubricating Biomimetic TiC/FeCrWMoV Cermets
Preparation of Green Tapes for LTCC/Cu Multilayer Substrates
Fabrication of Mo/Cu Functional Graded Material by Resistance Sintering under Ultra-High Pressure
Effect of Tin Additive on the Microstructure and Loss of Ferrite for Switching Mode Power Supply
A New Bulk Deformation Method - Cyclic Extrusion
Temperature Measurement and Microstructure Control for Rene88DT Superalloy during Laser Rapid Forming
The Dispersion of MWCNTs within Epoxy by Treatment with Coupling and Dispersing Agents
Hot Corrosion Behavior of AlCuFeCr Quasicrystalline Coating on Titanium Alloy with the Mixture of NaCl and Na2SO4 Deposit
by "Nielsen BookData"