Superconducting and functional materials

Author(s)

Bibliographic Information

Superconducting and functional materials

edited by Yafeng Lu ... [et al.]

（Materials science forum, v. 546-549 . Progress in light metals, aerospace materials and superconductors . 2006 BIMW : 2006 Beijing International Materials Week, June 25-30, 2006, Beijing, China / sponsored and organized by Chinese Materials Research Society (C-MRS) ; pt. 4）

Trans Tech Publications, c2007

  • set

Available at  / 1 libraries

Search this Book/Journal

Note

Includes bibliographical references and index

Description and Table of Contents

Description

This immense 4 volume set comprises 495 peer-reviewed papers, divided into four parts: Magnesium (Part 1), Aluminum Alloys (Part 2), Aerospace Materials (Part 3) and Superconducting and Functional Materials (Part 4).

Table of Contents

New Perspectives for Wrought Magnesium Alloys Automotive Mg Research and Development in North America State of the Art in the Refining and Recycling of Magnesium Research and Development of Processing Technologies for Wrought Magnesium Alloys Overview of CAST and Australian Magnesium Research Development of Magnesium Alloys with High Performance Effects of Microstructure and Partial Melting on Tensile Properties of AZ91 Magnesium Cast Alloy Effect of Heat Treatment on the Microstructure and Creep Behavior of Mg-Sn-Ca Alloys Creep Behaviour and Microstructure of Magnesium Die Cast Alloys AZ91 and AE42 Growth Rate of Small Fatigue Cracks of Cast Magnesium Alloy at Different Conditions A Cyclic Stress-Strain Constitutive Model for Polycrystalline Magnesium Alloy and its Application Dynamic Stress-Strain Behavior of AZ91 Alloy at High-Strain Rate Microstructure Evaluate System of Semi-Solid Forming Zr-Containing Precipitates in Mg-3wt%Nd-0.2wt%Zn-0.4wt%Zr Alloy during Solution Treatment at 540 DegreesC Microstructure, Mechanical Properties, Creep and Corrosion Resistance of Mg-Gd-Y-Zr(-Ca) Alloys Effects of Er on Microstructure and Mechanical Properties of Mg-Zn-Er-Zr Magnesium Alloys Microstructure Simulation of Die Casting AZ91D Alloy A Novel Squeeze Casting Process for Producing Magnesium Wheels Effective Protection of Magnesium Melt Surface from Oxidation Using HFC125-Containing Shielding Gas Development of a -Type Mg-Zn-Al Alloy: An Investigation of the Microstructure and Solidification Characteristics Ultrasonic Treatment of Magnesium Alloy Melts and its Effects on Solidification Microstructures Microstructure Simulation of Magnesium Alloy Effect of Sc on Microstructures and Corrosion Properties of AZ91 Microstructure of AZ91D in Different Treatment Conditions Low-Cycle Fatigue Behavior of Three Die Cast Magnesium Alloys Compression Deformation Behavior of AZ91D Magnesium Alloy in Semi-Solid State Effects of CaCO3 Modificator on Microstructure and Mechanical Properties of Cast AZ91 Magnesium Alloy Microstructure and Mechanical Properties of Mg-Gd-Sm-Zr Alloy Mechanical Properties and Creep Behavior of Mg-Gd-Y-Zr Alloys Microstructure and Mechanical Properties of Low Pressure Die Cast AM50 Magnesium Alloy Tensile and Compressive Creep Behavior of Coarse-Grained Mg-Al-Sr Castings Influence of Cooling Rates on the Dentrite Morphology and Hardness of the Surface-Chilled Mg-10Gd-3Y Magnesium Alloy Effect of Si, Sr Additions on Microstructure and Mechanical Properties of AZ91 Alloy Effects of Al-Sr Master Alloys on the As-Cast Microstructure of the AZ31 Magnesium Alloys The Microstructure and Mechanical Properties of Mg-8Zn-8Al-4RE Magnesium Alloy Effects of Aluminum Content on the As-Cast Microstructure and Mechanical Properties of Mg-xAl-0.7Si Based Alloys Change of Inclusion and Mechanical Properties of Magnesium Alloy during Vacuum Melting Effect of RE Content on the Fracture Behavior in Mg-Gd-Nd-Zr Alloys Microstructure and Precipitates in Mg-Zn-Y Alloys Study on Electromagnetic Vibration Casting (EVC) of Magnesium Alloys Influence of RE on Microstructure and Mechanical Properties of Mg-Li-Al Alloys Effects of Non-Flux Purification on the Microstructure and Mechanical Properties of AZ31+xCa Mg Alloy A Constitutive Model for Casting Magnesium Alloy Based on the Analysis of a Spherical Void Model Microstructures and Mechanical Properties of Mg-Li-Zn Alloys as Processed by ECAE Microstructural Characterization and Mechanical Behavior of an Mg-9%Li-1%Zn Alloy Effect of Grain Size on Necklace Formation of Magnesium Alloys Elevated Temperature Mechanical Behavior of Mg-Y-Zn Alloys Microstructures, Tensile Properties and Forming Process of AZ31 Alloy Sheets Effect of Temperature on Microstructure and Texture during Compression of AZ31 Effect of Second Phase on the Mechanical Properties of Mg-Al-Zn Alloy by Equal Channel Angular Extrusion Microstructure Evolution and Mechanical Properties of an AZ61 Mg Alloy through Cyclic Extrusion Compression Effects of Extrusion on the Mechanical Properties and Damping Capacity of Mg-1.8Cu-0.5Mn Alloy Fracture Mechanism Analysis of Mg-9Gd-4Y-0.6Zr Alloy Annealing Behavior of the Compressed AZ31 Magnesium Alloy with Different Strain Compressive Deformation of Cast AM60B Mg Alloy at Elevated Temperatures The Experimental Research on the Formability of Stamping of Magnesium Alloy AZ31B Sheets Thermo-Mechanical Coupled Simulation of Warm Stamping of AZ31 Magnesium Alloy Sheet Experimental Research on Warm Deep Drawing of Magnesium Alloy Sheet by Variable Blank Holder Force Control Numerical Simulation of Magnesium Alloy AZ31B Sheets with Thermal Deep-Drawing Process Influence of Deformation on Precipitation and Recrystallization in an AZ80 Magnesium Alloy A Preliminary Analysis on Compression Twins in Magnesium Effect of Nd on Microstructures and Properties of AZ31 Wrought Mg Alloy Mechanical Properties of Mg-8Zn-4Al-xCa Extruded Magnesium Alloy Tube at Elevated Temperature Influence of Rolling Temperature on Microstructure and Tensile Properties of AZ31 Sheets Effect of Second-Phase Particles on Grain Refinement of Mg-Al-Zn Alloy during ECAE Effect of Cooling Rate on the Microstructure and Mechanical Properties of ZK60 Alloy Microstructure and Mechanical Properties of Extruded Mg-Zn-Gd-Based Alloy Reinforced by Quasicrystals and Laves Phase Development and Validation of Extrusion Limit Diagram for AZ31 and AM30 Magnesium Alloys Warm Hydroforming of Magnesium Alloy AZ31 Sheets Superplastic Behavior of an Extruded Mg-Zn-Y-Zr Alloy The Fatigue Crack Propagation (FCP) Behavior of the Forged Mg-Zn-Y-Zr Alloy Texture Evolution in Rolled Mg-13wt%Li-X Alloy Annealing Process Optimization of a ME Wrought Magnesium Alloy Effects of Homogenization on the Formability of ZM21 Alloy Status and Development of Magnesium Alloy Thin Strip Casting Rolling of AZ31 Magnesium Alloy Thin Strip The Influence of Zinc and Zirconium on the Microstructure of the As-Cast Magnesium Alloy ZK60 Hot Compression Deformation Simulation of AZ61B Magnesium Alloy Effect of Rolling and Annealing on the Mechanical Properties and Microstructure of AZ31 Magnesium Alloy Study on Solidification Microstructure of AZ31 Alloy Strips by Vertical Twin Roll Casting Superplastic Forming Limit and Instability of AZ31B Sheet Effects of Zn on Mechanical Properties of MZK60 Wrought Alloy Phase Analysis of Al-Mn Compounds in the AZ Magnesium Alloys Microstructures and Mechanical Properties of AZ31B Extruded Sheets from Different Casting Processing Effect of Hot Extrusion, Hard Drawing and Heat Treatment on Properties and Structure of MB5B Wrought Mg Alloy Effect of Temperature and Relative Humidity on Fatigue Crack Propagation Behavior of AZ61 Magnesium Alloy Effect of Nd and Y Addition on Microstructure and Mechanical Properties of Extruded Mg-Zn-Zr Alloy Diffusion Bonding of Magnesium, Zirconium and Titanium as Implant Material Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant Aging Behavior of Mg-9Gd-4Y-0.6Mn Alloy Preparation of Amorphous Mg-Ni Alloy by Mechanical Alloying and Investigation on its Hydrogen Storage Properties Study on the Microstructure and Mechanical Property of High Strength Mg-Nd-Zn-Zr Alloy On the Infiltration of Fiber Reinforced AZ91D Alloy The Cathodic Reduction Processes of SiO2 Impurity in Magnesium Electrolysis Expulsion in Resistance Spot Welding of AZ31B Magnesium Alloy The Thermodynamics Calculation of Mg-Zn Alloy A Database Prototype of Magnesium Alloy Based on Internet Microstructure and Electrochemical Properties of Mg2Ni Substituted by Al, Ti Biocompatibility Evaluation of Magnesium-Based Materials Preparation of Mg-Sr Alloys Using Vacuum Reduction: A Thermodynamics Approach Study on the Process and Mechanism of Rolling-Bonding between Magnesium and Aluminum Nickel Foam Reinforced AZ91 Magnesium Alloy EXAFS Study of Annealing Effects on Mg65Cu25Gd10 Metallic Glass Interaction between Carbon Nanotube and Mg Surface: Ab-Initio Investigation Mechanical Behavior of Gas Tungsten Arc Surface Modified Composite Layer on Mg Alloy AZ31 with SiCp and Aluminum Intermediate Phase Growth of Mg-Al Diffusion Couple under a Strong Static Magnetic Field Application of G-L Dislocation Model in Low Frequency Damping Capacities of AZ91D and SiCw/AZ91D Composites Processing, Microstructure and Mechanical Properties of SiCp/AZ91 Mg Matrix Composites Fabricated by Squeeze Casting Microstructure and Mechanical Properties of New Particle-Disperse-Reinforced Mg Composite Mg- 6Al- 3B2O3- 1NaCl- 1CaCl2 Measurement of Press Creep Stress Exponent of ZM6 Alloy at Room Temperature Surface Modification of AZ91 Magnesium Alloy Magnesium Films Deposited on Different Substrates via Arc PVD Method Corrosion Protection of Joining Areas in Magnesium Die-Cast and Sheet Products Effects of Post Heat Treatment on the Interfacial Characteristics of Aluminum Coated AZ91D Magnesium Alloy Effect of Aging on Electrochemical Behavior of T6-Treated WE54 Mg Alloy In Situ Observation of Initial Corrosion of AZ91 Alloy with Residual Stress in Wet-Dry Conditions Using Environmental Scanning Electron Microscope Growth and Microstructure of Microarc Oxidation Coating on Al18B4w/AZ91 Mg Matrix Composite Effect of Pulsed High Energy Electron Beam on Surface Modification of AZ91 Magnesium Alloy Ion Implanted AZ31 Magnesium Alloy Rare Earth Conversion Coating of Magnesium Alloy AZ91D Effect of Heat Treatment on Corrosion and Electrochemical Behaviors of Mg-3Nd-0.2Zn (wt.%) Magnesium Alloy Effect of CeCl3-Containing Flux on Microstructure and Mechanical Properties of Mg Alloy Containing Rare Earth Effect of Strontium on Mechanical Properties and Corrosion Resistance of AZ91D Application of Electrochemical Techniques to Characterization of the Corrosion Behaviors of GW63 Alloys A Comparison on Ceramic Coating Formed on AM50 Alloy by Micro-Arc Oxidation in Two Electrolytes Characteristics of Acoustic Emission during Fatigue of As-Rolled AZ31B Magnesium Alloy Comparison of Coating Properties by Two Pulse Modes on Magnesium Alloy Establishment of a Model of Growing Anodizing Film on AZ91D Mg Alloy Zn Coatings on AZ91D Magnesium Alloy Prepared by Electroplating from the Electrolyte Containing SnO2 sol Study on Phosphating on the Magnesium Alloys Surface Modification of Magnesium with Rare Earth Conversion Films for Biomedical Protection Fluidity Evolution of an Al-10%B4C Metal Matrix Composite Effect of Mg Content in Matrix on Infiltration Height in Producing MgO/Al Composite by Vacuum Infiltration Method Modification of A3003 Alloy for Development of High Toughness Al Alloy Tube Effect of Si on As-Cast Microstructure in Quasicrystalline Al-Cu -Fe Alloy Study on the Erbium Strengthened Aluminum Alloy Microstructural Evolution in Al-Sc and Al-Sc-Zr Alloys Damping Properties of 6063Al/Al2O3 SiO2 Particle Reinforced Composites Microstructures and Dynamic Compression Properties of a High Reinforcement Content TiB2/Al Composite Interfacial Reaction in Al Matrix Composites Reinforced by Mg Borate Whisker Effect of Silicon Addition and Thermal History on the Thermal Expansion Behavior of SiC/Al Composites The Influence of Interfacial and Structural Parameters on the Elastic Modulus of SiCp/6066Al Composites Microstructural Characterization of Sprayed Aluminum Matrix Composites Reinforced by SiC Particles Effect of Current Density on Morphology and Corrosion Resistance of Anodized Coating on SiCp/2024 Al Composite Effects of Temperature on the Weldability of Powder Metal Parts Joined by Diffusion Welding Microstructure and Performance in Diffusion Welded Joints of Al +5-10-15% WCp Composites Application of Microstructure Sensitive Design to FCC Polycrystals Coating Effect on Increasing Mechanical Property of 6061-T651 Alloy by Laser Shock Processing Numerical Analysis of Nano- or Micro-Crystalline Materials during ECAP by Dislocation Evolution Method Low-Frequency Electromagnetic Field Influencing Horizontal Direct Chill Casting of Aluminum Alloy Rods New Method and Experimental Study for Fast Evaluating Filling Mould Ability of Al-Si Alloy by Surface Tension Prediction of Fracture in Square-Cup Forming of Aluminium Alloy Numerical Modeling of Low Frequency Electromagnetic Casting of 7XXX Aluminum Alloys Micromechanism of Plastic Deformation on Elastic Modulus Homogenization Treatment of an Al-Li-Cu-Mg-Mn-Zr Alloy Influence of Pulse Electric Current on Solidification Structures of Al-Si Alloys Rheological Behavior and Thermo-Mechanical Coupling Analysis of Aluminum Continuous Roll Casting Process Numerical Simulation on Conform Process of Aluminum Alloy Rectangular Hollow Conductor 3-D Coupled Fluid-Thermal Finite Element Analysis of 3C-Style Nozzle's Fluid Field of Al Roll-Casting Friction and Wear Properties of Friction Stir Welds of 5052 Al Alloy Hot Deformation Behavior of 2519 Al Alloy during Isothermal Compression Microstructure and Grain Refining Performance of a Rapidly Solidified Al-5Ti-1B Master Alloy Effect of Calcium Addition and Heat Treatment on the Al-Zn-In Alloys as Sacrificial Anode Accumulative Roll-Bonding (ARB) of Sheets of Aluminium and its Commercial Alloys AA8006 and AA5754 at Ambient and Elevated Temperatures Overview of Recent Work on Precipitation in Al-Cu-Mg Alloys Correlation of Mechanical Properties with Defect Structure in Commercial Pure Al and Al-Mn Alloys Studied by Positron Annihilation Spectroscopy Morphological Changes and Plume Deflection Effect during Pulsed Laser Ablation Deposition of Al Microtexture Development and Flow Stress Saturation during Triaxial Forging of an Al-3Mg-Sc(Zr) Alloy Removal of Na and Ca from Aluminum Scrap through Filtration Evolution of Micro-Textures within Individual Grains in Rolled Polycrystal Aluminum Investigation of Inhomogeneous Deformation on Meso-Scale with Crystal Plasticity Finite Element Atomic Bonding and Properties of Al-Li Alloy in Earlier Ageing Stage Study of Cu Addition on Precipitation Behaviors and Mechanical Properties in AA6082 Al-Mg-Si Alloy Effect of a Si Additive on an Al Grain Boundary: A First-Principles Investigation Numerical Simulation on Influence of Clearance and Friction on Wrinkling in Bending of Aluminum Alloy Rectangular Tubes Small Angle X-Ray Scattering Study in Equal-Channel Angular Pressed 7055 Al Alloys Effect of Cryogenic Treatment on Mechanical Properties and Microstructures of 3102 Al-Alloy Influence of Ageing Treatment on Microstructure and Properties of 7150 Alloy Effect of Second Phases on Tensile Property in Artificial Ageing and RRA Process of Super-High Strength Aluminum Alloy Effect of Minor Sc and Zr on the Fatigue Properties of Al-Mg-Mn Alloy Aging Characteristics of 7A52 Al-Zn-Mg Alloy Structure and Property of Nickel-Modified Ultrahigh Strength Al-Zn-Mg-Cu Alloy by Spray Forming Optimizing Solution Heat Treatment to Improve Mechanical Properties of Al Alloy 7055 Prediction of Hardness of Aluminum Alloy 7055 by Quench Factor Analysis Shear Pressing for Grain Refinement of Al-Mg-Li Sheet Particle-Stimulated Nucleation of Recrystallization for Grain-Size Control in 01420 Al-Li Alloy 3D FEM Simulation of Void Growth in Aluminum Single Crystals Effect of Trace Element Er on Al-Mg and Al-Mg-Mn Alloys Investigation on Wear Resistance of Al-Si-Ti Piston Alloys Produced by Electrolysis Cracking Susceptibility and Joint Property Study of the 6061 Aluminum Grain Refinement of an Al-Cu-Mg Alloy by Microalloying and Common Thermo-Mechanical Treatment Effects of Electromagnetic Pump Casting on Microstructure and Mechanical Properties of ZLSi9Mg Casting Aluminum Alloy Microstructure and Thermal Stability of Al-Mg-Mn Alloys by Equal Channel Angular Pressing at Elevated Temperature Morphology and Distribution of in Al-Fe Alloy under an Alternating Magnetic Field Effects of Titanium Refining Methods on the Microstructure and Mechanical Properties of A356-0.1%Ti Alloys Alloying Behavior of Rare-Earth Er in Al-Cu-Mg-Ag Alloy Modifying Effect of Al-Ti-C-P Master Alloy on Hypereutectic Al-Si Alloy Effect of Low Frequency Electromagnetic Field on Microstructures and Macro-Segregation of Direct Chill Casting Al-19.2%Si Alloys Through-Thickness Microstructure, Texture and Strength Gradients in AA 7055 Rolled Plate Influence of Scandium on Microstructures and Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloys Evolution of Flow Stress and Microstructure in an Al-Zn-MgSeries Alloy during Hot Deformation Effect of Extrusion Temperature and Rate on Formability and Microstructure of 7075 Aluminum Alloy Characterization of Precipitation in Al-Zn-Mg-Cuand Li Containing Al-Zn-Mg-Cu Alloys after Isothermal Aging Observation of As-Cast Microstructure Feature of Al Sheet Used for Can Manufacturing with High Forming Properties Metallographic Characterization of Porosity in A Cast Aluminum Alloy A356-T6 Microstructures and Mechanical Properties of an Al-Cu-Li-Mg-Zr Alloy Containing Zn and Mn Effects of High Gradient Magnetic Fields on Solidified Structures of Non-Magnetic Metals with Different Susceptibilities Correction of Ghost in Reduced ODF with Particle Swarm Optimization Algorithm HRTEM Analysis of Aging Electrolytic Low-Ti Al Alloy Effect of Yb Additions on Microstructures and Properties of High Strength Al-Zn-Mg-Cu-Zr Alloys The Effects of Thermo-Mechanical Treatment on the Properties of 2519 Aluminum Alloy Characters of Coarse Grains Subdivisions in Rolled Polycrystalline Al Microstructural Evolvement of Al-1.5Si-1.1Mg-0.5Cu Alloy Ingot during Homogenization Treatment Performance of Electromagnetic Purification System in Continuous Twin Roll Casting of Aluminum Sheet Microstructure Inhomogeneities in 2519A Aluminum Plate Penetrated by an Incendiary Projectile Magnetically Aligned Al3Ni Phase in Al-Ni Alloys Solidified with a High Magnetic Field Dynamic Recrystallization of 3104 Aluminum Alloy during Isothermal Compression Deformation at Elevated Temperatures Investigation of Flow Stress Behavior and Microstructural Evolution of 7050 Al Alloy Influence of Zr on the Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy Tensile Properties of Large Extrusion and Forgings of RS P/M Al-9Fe-1.9Mo-1.7Si Aluminum Alloy Study on Microstructural Evolution and Age Hardening in High-Purity Al-Cu-Mg-Ag Alloy Flow Field and Gas-Bubble Size Analysis in Water Model for the Process of Aluminum Melt Degassing by Particle Image Velocimetry Corrosion Behavior of Metallic Materials in Ethanol-Gasoline Alternative Fuels Structural Characterization and Corrosion Properties of BTESPT Silane Films on Surface of 2024-T6 Aluminium Alloy Effect of Pre-Rolling Reduction on Intergranular Corrosion of Aluminum Alloy 2519A Influence of the Nickel on the Corrosion Behavior of Al-Mg-Sc-Zr Alloy Thermal Stability of Nanocrystallized Surface Layer in Al-Zn-Mg Alloy by Surface Mechanical Attrition Treatment Surface Morphology and Discharge Channel Temperature Estimation of PEO Ceramic Coatings on Aluminum Effects of HTCA on Microstructure and Surface Morphology of Porous Anodic Alumina Membrane Structure and Properties of Microarc Oxidation Films on Zinc-Containing Aluminum Alloy Anti-Oxidation and Anti-Corrosion Properties of Al-Si Metal Anodes Corrosion Behavior Improvements of High Active Aluminum Alloy Anode in Alkaline Solution by Adding Inhibitors Exfoliation Corrosion Behavior of 2524 Aluminum Alloy Liquation Cracking in Heat Affected Zone in Ni Superalloy Welds The Future of Commercial Air Transport and Aeroengines: Challenges and Opportunities French Research and Development Activities on High-Performance Superalloys for Gas Turbine Components Atomic Partitioning of Platinum and Ruthenium in Advanced Single Crystal Ni-Based Superalloys Effect of Ru on Microstructure of a Single Crystal Nickel-Base Superalloy Effects of Ru Additions on the Microstructures and Stress Rupture Life of a Directionally Solidified Ni-Based Cast Superalloy Influence of Ru and Cr on the Heat-Treated Microstructure of Ni-Based Superalloys Dislocation Deformation Mechanisms during Fatigue of the Nickel-Based Superalloy CMSX-4 Temperature Dependence of High-Cycle Fatigue Behavior of a Ni-Base Single Crystal Superalloy Microstructure Evolution and Strain Features of a Single Crystal Nickel Base Superalloy during Tensile/Compression Creep Surface Recrystallization and its Effect on Rupture Life of SRR99 Single Crystal Superalloy Precipitate Free Zones along Recrystallization Grain Boundaries during Creep in a Directionally Solidified Superalloy Influence of Aging Temperature on the Microstructure and Stress Rupture Property of DZ951 Alloy Effect of Temperature on Formation of Borides in TLP Joint of a Kind of Nickel-Base Single Crystal Superalloy Stress Rupture Properties of the Second Generation Single Crystal Superalloy DD6 after High Temperature Exposure Isothermal Oxidation Behavior of Ni Base Superalloy DM02 for High Temperature Dies Effect of Alloying Elements on Microstructure and Mechanical Properties of High Temperature Die Material DM02 Alloy Development and Characterization of Overspeed and Cyclic Behavior of Dual Grain Structure Turbine Disks INCONEL Alloy 783: An Oxidation Resistant, Low Expansion Superalloy for Gas and Steam Turbine Applications Development of New Generation Turbine Disk Superalloys in the HTM21 Project High Temperature Structure Stability Study on Nb-Containing Nickel-Base Superalloys The Studies of Non-Equilibrium Grain Boundary Segregation in Ni-Base Superalloy Investigation on Dynamic Recrystallization Behavior in Hot Deformed Superalloy Inconel 718 Degeneration of Primary MC Carbide in a Cast Ni-Base Superalloy Optimization of Nd:YAG-Laser Welding Process for Inconel 718 Alloy Femtosecond Laser Ablation of a Single Crystal Superalloy CMSX-4 in Different Environments Research on Sheet Metal of a New Ni-Based Superalloy Prepared by EB-PVD Quantification of High Temperature Strength of Nickel-Based Superalloys Optimisation of Spray Forming Ni Superalloys via Process Modelling and On-Line Monitoring Interface Energy Calculation of - ' in Ni-Al System Using the Cluster Variation Method Density of Ni-Co-Al Ternary Alloys in Liquid States Measured by a Modified Pycnometric Method Tensile Creep Behaviors of a P-Type Structure Single Crystal Nickel-Base Superalloy Phase Transformation in Binary Titanium-Base Alloys with Metals of the I, IV VIII Groups High Fugacity Hydrogen Effects in Beta-21S Titanium Alloy Finite Element Analysis on Superplastic Blow Forming of Ti-6Al-4V Multi-Sheets Hydrogen's Absorption/Desorption Behavior in Gaseous-Phase Charged Duplex-Annealed Ti-6Al-4V Alloy Research on Semi-Solid Deformation and Forging Behavior of Ti14 Alloy Mechanical Properties and High Temperature Deformation of Beta Titanium Alloys Hot Deformation Behavior and Microstructure Evolution of Ti-6.5Al-1.5Zr-3.5Mo-0.3Si with an Equiaxed + Starting Structure In Situ AFM Observation of Mechanical Behavior of Beta Titanium Alloy in Nano-Indentation Test Microstructural and Mechanical Characterization of TiAl/Ti6242 Diffusion Bonds Study on Combustion Synthesis and Densification Process for Titanium Diboride and Iron Layered Materials Predeformation Effects on Shear Response and Microstructure in Pure Titanium-TA2 Hydrogen Behavior in GTA Welded Ti-6Al-4V and Beta-21S Aerospace Applicative Titanium Alloys A Novel Canning Technology for Forging of Gamma-TiAl Alloys Mechanical Property and Elastic Modulus of Metastable Ti-Nb Based Alloys with Si Addition Influence of Rapid Solidification on the Microstructure and Mechanical Properties of NiAl-Based Near Eutectic Alloys Study on Fracture Behavior of -TiAl Based Alloys Effect of Heat Treatment on Microstructure and Mechanical Properties for a Ni3Al Base Single Crystal Alloy DDIC6 Microstructure Evolution of Ti-Al Peritectic System during the Initiated Stage of Directional Solidification Theoretical Prediction of Ternary Site Occupancies in ZrCr2 and NbCr2 Laves Phases First-Principles Study on Initial Oxidation of NiAl(110) Study of Hot Deformation Characteristics of an As-Cast Ti-22Al-25Nb Alloy NiCr-CrAl Coating for Ni3Al Base Alloy IC6AE A First Principle Study of the Effect of Nb on the Oxidation Behavior of NiTi Alloy Effects of Nb on the High Temperature Mechanical Properties of TiNiAl Alloys Effect of Mo on the Oxidation Behavior of NiTiAl Alloy Effects of Cr and Al on High Temperature Oxidation Resistance of Nb-Si System Intermetallics Effect of B on the Microstructures and High Temperature Oxidation Resistance of a Nb-Si System In Situ Composite Study on Interface Reactions between Nb-Si System In Situ Composite and Ceramics Preparation and Mechanical Properties of C/C-SiC Composites Fabrication of AlN-SiC-TiB2 Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing Room and Elevated Temperature Mechanical Properties of Hot-Pressed Uni-Cf/SiO2 Composite In Situ Composites: Effect of Intermolecular Hydrogen Bonds on Polyamide 66/TLCP Blends Effect of Needling Parameters on Mechanical Properties of C/C Composites Reinforced by Carbon Cloth Effect of Silica on the Electrical Properties of Epoxy of Phenolic Resin/Carbon Black/Silica Composite Coating Effects of Interphase Thickness on Damping Behavior of 2D C/SiC Composites Study on Tensile and High Cycle Fatigue Properties of TiC Particle Reinforced Titanium Matrix Composite Use of WEDM in the Characterization Process of Al/2-Phase Systems Consolidated by Multilayer Cylindrical Dynamic Compaction Method Effect of Ozone Treatment on the Interfacial Properties of High Modulus Carbon Fiber/Epoxy Composites Light Weight and High Modulus Aluminum Matrix Composite and its Application into Aerospace Finite Element Analysis of Interfacial Debonding Damage in Fiber-Reinforced Ceramic Matrix Composites Preparation of AlN-BN Composite by Composite Powders Distortion Simulation of Unsymmetrical Composite Laminates Using the Finite Element Analysis Method Design of a Deployable Antenna Actuated by Shape Memory Alloy Hinge Effect of Electrochemical Treatment on the Surface Structure and Tensile Strength of Carben Coated CVD SiC Fiber Optimum Design, Microstructure and Mechanical Properties of Ti/Ti3Al Multi-Layered Materials Studies on Thermal Property of Silica Aerogel/Epoxy Composite Acoustic Emission Research on Thermal Shock Behaviors of Three-Dimensional C/SiC Composites in Different Environments A Finite Element Model and Experimental Verification for the Mechanical Properties of 2.5-D Braided Composites Microstructural Characterization and Properties of SiC/Al Composites for Electronic Packaging Fabricated by Pressureless Infiltration Optimization of Radar Absorbing Structure Using the Genetic Algorithm Modification of Diallyl Isophthalate with Dimethacrylate Liquid Crystalline Reaction Mechanisms of Combustion Synthesis of Si3N4 -SiC -TiN Ceramics Microstructures and Toughening Mechanisms of Y2O3 Doped Al2O3/ZrO2 Eutectic Composite Ceramics Prepared by SHS Melt-Growth Process Investigation on a Novel Low Temperature/Vacuum Bag Cure Prepreg Kinetics of Interfacial Reaction in SiCf/Ti6Al4V Composites Effect of Mo on Properties and Microstructure of Steel-Bonded Cemented Carbide GT35 Produced by In Situ Reduction of Ilmenite Internal Friction Behaviors of TiNi Shape Memory Alloy Fiber/Ni Matrix Composite Quantitative Analysis on Fracture Mechanism of Al Melt Oxidatively Infiltrated SiCp/Al2O3-Al Composites by XPS Study on the Vibration of a Sandwich Beam with Smart Composites-MRF Effects of Particle Size on Microstructure of the Matrix Alloy in Aluminum Matrix Composites Mechanical and Microwave Dielectric Properties of Csf/Si3N4 Composites Pores in PAN-Based Carbon Fiber and Effects of Pore Defects on Mechanical Properties Tactile Display Based on Controllable Fluid Actuator Structural Optimization Design of MR Fluid Clutch In Situ Measurement on the Pressure and Resin Flow in Hot Press Process of Composites Advanced Graded Protective Coatings, Deposited by EB-PVD Effect of Hf Addition on High Temperature Properties of Ir-Containing Alloy Coatings A Comparison of the Mechanical Properties of RF- and DC- Sputter-Deposited Cr Thin Films Formation and Characterization of the Quasicrystal Films Suspension Development for Electrophoretic Deposition of Mullite Coating Oxidation Behavior and Residual Stress in Thermally Grown Oxides of Detonation and High Velocity Oxygen Fuel Sprayed NiCrAlY Coatings Thermal Cycling and Hot-Corrosion Behavior of Plasma Sprayed Segmented Thermal Barrier Coatings Influences of Argon Atmosphere on Ceramic Coatings on Ti-6Al-4V Alloy by Micro-Plasma Oxidation in Different Solutions Development and Oxidation Resistance of Si-Modifide MCrAlY Coatings on Nb-Base Alloy Optical Absorption Properties of Nanotitanium Dioxide Doped ZnO/Silicone Thermal Control Coating Ti-N-C Films Deposited by Ion Beam Assisted MF Twin Targets Unbalanced Magnetron Sputtering Microstructure Evolution of Nd2O3 and Yb2O3 Co-Doped YSZ Thermal Barrier Coatings during High Temperature Exposure Influence of NiCoCrAlY and Diffusion Aluminide Coating on Oxidation and Hot Corrosion of a Ni-Based Superalloy Evaluation of Tribological Properties of a Cathodic Arc Ion-Plated CrSiN Coating under Both Unlubricated and Boundary-Lubricated Conditions Electrochemical Corrosion Behaviors of Ti2AlNb with Double Glow Plasma Surface Chromized Visible-Blind Metal-Semiconductor-Metal Structured Deep-Ultraviolet Photodetectors Using Single-Crystalline Diamond Thin Film Corrosion Properties of Inconel Alloy 600 Coated by Simultaneous Aluminizing-Chromizing Process Microarc Oxidation Coatings Fabricated on Ti3Al-Based Alloy in Silicate Electrolyte Magnetron Sputtering High Temperature Mo-Al2O3 Cermet Solar Selective Coatings Hf Modified NiAl Bond Coat for Thermal Barrier Coating Application Effects of EB-PVD Process TGO Formation and Growth within Thermal Barrier Coatings Long-Term Oxidation Resistance of (Ti,Al,Y)N Coatings at 800 DegreesC Numerical Analysis of EB-PVD Thermal Barrier Coatings under Thermal-Mechanical Coupled Environment The Effects of Rare Earth Elements on Corrosion Resistance of Sol-Gel Coatings for 2024 Aluminum Alloy Structure and Anti-Corrosion of Tri-Layer Ni-P Amorphous Alloy Coating Prepared in the Same Bath Study on Interfacial Characterization and Mechanical Properties of Plasma-Sprayed Tungsten Coatings Preparation of High Silicon Steel by EB-PVD Melting Temperatures of Several Oxides under Pressure Effects of Ti-1023 Anodized Coating on Corrosion Behavior of Ti-1023/30CrMnSiA and Ti-1023/LY12 Galvanic Couples Tiny Crystals Surviving above the Melting Temperature and Acting as Growth Nuclei of the High-Tc Superconductor Microstructure High-Strength Nb3Sn Wire Development for Compact Superconducting Magnets Development of Ag-Sheathed Bi2223 Tapes with Interfilamentary Resistive Barriers for Reducing AC Losses Coated Conductor: Some Critical Aspects from Substrate to Device Artificial Nano-Scale Precipitates for Flux Pinning in YBa2Cu3O7- Thin Films and Coated Conductors Continuous Deposition of Buffer Layers for YBCO Coated Conductor Using Reactive Magnetron Sputtering New Cu-Ni Substrate for Coated Conductors A New Series of Potential Buffer Layers for REBCO Coated Conductor Influence of Oxygen Partial Pressure on the Microstructures and Critical Current Densities of PMP-Processed YBCO Bulks with Submicron Y2BaCuO5 Particles Effect of Ultrafine Gd211 on Processing and Superconducting Properties of Gdbacuo Bulk Superconductors Effect of Temperature on La1.85Sr0.15CuO4 Single Crystal Growth by Floating Zone Method Neutron Diffraction Studies of the Zr/Nb Effects on the Nb3Sn Phase Formation of Monofilament Wires Critical and Irreversibility Temperature Study of Internal-Sn Nb3Sn Superconducting Wires Effect of Heat Treatment on Superconducting Properties of Pure and Ti, Zr-Doped MgB2 Superconducting Wires Fabricated by In Situ PIT Method MgB2 Superconducting Films Fabricated on Copper Substrate by Hybrid Physical-Chemical Vapor Deposition Transverse Compressive Stress Effects on the Critical Current of Bi-2223 Tapes Round Multifilament Bi-2212/Ag Wire Development for High Field Magnet Applications Finite Element Analysis of Quench Propagation Velocity in Bi-2223/Ag Superconducting Multifilamentary Tape High Magnetic Field Superconducting Magnet Technology and its Applications A New HTS/PMG Maglev Design Using Halbach Array Ground and Excited States of the Two and Three Dimensional Bipolaron in a Quantum Dot Study on the Relation between Electronic Structure and Tc for Cuprate Superconductor Systems The Progress on Study of Isotope Effects in High TC Copper Oxide Superconductors Study on the Precursory Powder for Bi-2223 Tape Influences of Preparation Conditions on Melting and Reformation Behaviors of (Bi,Pb)-2223 Core in the Ag-Sheathed Tape Influence of Sheath Materials on the Strain Tolerance of Bi-2223 Superconducting Tapes Bending Strain Effects on the Critical Current of Bi-2223 Superconducting Tapes by Pure Bending Method HTS High Q Resonant Controller Study on Minimum Propagation Current of Bi-2223/Ag Superconducting Multifilament Tape Electrical Properties of a High-Tc Superconductor-Polymer Compersite Research of Secondary Gel Technic to Synthesize Bi2Sr2CaCu2Oy Superconductor Influence of Processing Parameters on the Texture Formation in Powder Metallurgic Ni-5at.%W Substrate Tapes Textured YBCO Films Derived from Low-Fluorine-Content Solution Preparation of YBCO Superconducting Films by Sol-Gel Process Epitaxial Growth of CeO2 Buffer Layers on Both YSZ Single Crystal and Textured Ni5W Substrates by MOD Method Investigation Texture in Ni-W Alloy Substrates for Coated Conductors Te Substitution Effect in Low-Dimensional Superconductor NbSe2-xTex (x = 0, 0.1, 0.2) Effects of Heat Treatments on the Nb3Sn Composite Strands Deposition of MgB2 Thin Films on Nb Substrates Using an In Situ Annealing PLD Method Influence of Preparation Process on Microstructure, Critical Current Density and Tc of MgB2/Fe/Cu Wires Influence of Mg and B Stoichiometry on the Formation Behavior of MgB2 Phase Comparative Studies of Nanoscale SiC Whisker and Si/N/C Doped MgB2 Tapes Effect of Thickness on Properties of MgB2 Thin Films MgB2 Films on Nb Substrate and its Bending Test Effects of Nano-Al Doping on Superconductivity and Microstructure of MgB2 Bulk Superconductors Improvements on the Properties of the In Situ MgB2/Fe Tapes Annealed by Spark Plasma Sintering Technique Effect of Pulsed Magnetic Field Processing on MgB2 Superconductors MgB2 Thick Film Grown on Silicon Carbide Substrate by Hybrid Physical-Chemical Vapor Deposition Solution Phase Synthesis of Superconducting La2CuO4 Microspheres The Effects of BaF2 Addition on Melt-Processed YBa2Cu3O7-x Superconductors Levitation Capability of a Bulk YBa2Cu3O7-x with NdFeB Guideway by Two Magnetization Methods Crystal Growth Mechanism of YBCO Superconductors Prepared by Unidirectional Solidification Method Analysis on the Ceasing Mechanism of the YBCO Crystal Growth during Melting Growth Process by Unidirectional Solidification Study of the Phase Formation of Sol-Gel YBa2Cu3O7-x Samples in Flowing Oxygen Atmosphere Effect of Magnet Moving Speed on the Relaxation Rate of the Levitation Force for YBCO Bulk Effect of the Moving Speed between Magnet and Superconductor on the Levitation Force of Single-Domain YBCO Bulk Performance of Gd-Ba-Cu-O Superconductor Bulks with Ultrafine Gd2BaCuO5 Powders Prepared by Low-Temperature Combustion Synthesis Basic Analysis of Magnetic Field in High Temperature Bulk Superconductors Ionic Cluster Effect in Suppression on Superconductivity in Doped Y123 Simultaneous Substitution of Y and Ba by Ca in YBCO Microstructures and Mechanical Properties of Porous Ti51Ni(49-x)Mox Shape Memory Alloys Structure, Magnetization and Magnetostriction of Sm(Zn1-xTx) (T=Fe, Co) Alloys Effects of -Ray Irradiation on Structure and Properties of ZnO:Al Thin Film Advanced Giant Magnetostrictive Alloys and Application in Actuators for Active Vibration Control Microstructure and Pseudoelasticity of Ti-Nb-Si Based Alloys with Biocompatible Alloying Elements Preparation and Properties of Ceramic Tiles for Heat Insulation Preparation of FeCoZrBCu Thin Films and their Effect of Microstructure on Magnetic Properties Magnetic and Transport Properties of Mn-Si Films Synthesized on 4H-SiC(0001) Substrates Electrochemical Fabrication of BixTe1-x (0.4 x 0.7) Nanowire Arrays Crystallographic Texture of MgO and its Effect on the Growth of BaTiO3 Thin Films by RF Sputtering Sintering of -Si3N4 Powder Prepared by Self-Propagating High-Temperature Synthesis (SHS) Fuzzy Dynamic Model of a Giant Magnetostrictive Actuator Molecular Dynamics Study of the Structure in Vitreous Silica with COMPASS Force Field at Elevated Temperatures Study of a Ceramic Thermocouple for Al Production Adaptive Vibration Control on Six Degree-of-Freedom Magnetostrictive Smart Structure Magnetostriction and Hysteresis of (Tb,Dy,Ho)Fe2 Alloys The Growth Mechanism of Quasi One-Dimensional ZnO Nanostructures Synthesized by Carbon Reduction without Catalyst Low-Temperature Sintering and Dielectric Properties of (Zn1-xMgx)TiO3 Giant Magnetostrictive Material Actuator Based Active Vibration Control-a Modified - LMS Algorithm Study of the Structure and Magnetic Properties of Fe/Cu Superlattices from First-Principles Comparative Study of Recovery Strains in Severely Cold-Deformed NiTi Influence of Carburization on Mechanical Behaviors of NiTiCu Alloy under Dynamic Impact Loading Fluorinated Acrylic Films: Effect of F Content on Aging and Corrosion Testing Heusler Type CoNiGa Alloys with High Martensitic Transformation Temperature Design and Modal Analysis of Fast Magnetostrictive Steering Mirror Modeling Rate-Dependent Hysteresis for Magnetostrictive Actuator Effects of Annealing on Phase Transformation and Mechanical Behaviors of NiTi Shape Memory Alloy Ultra Thin Sheet Mechanical Properties and Shape Memory Effects of TiNiNb Shape Memory Alloys with Low Niobium Content Density and Mechanical Strength of Ferrite for Inertial Gyroscope Synthesis and Low Temperature Magnetic Properties of Metal Elements Filled Polymer-Derived SiCN Ceramic Composites Micro-Pore Structure and Mechanical Properties of High Temperature Self-Lubricating Biomimetic TiC/FeCrWMoV Cermets Preparation of Green Tapes for LTCC/Cu Multilayer Substrates Fabrication of Mo/Cu Functional Graded Material by Resistance Sintering under Ultra-High Pressure Effect of Tin Additive on the Microstructure and Loss of Ferrite for Switching Mode Power Supply A New Bulk Deformation Method - Cyclic Extrusion Temperature Measurement and Microstructure Control for Rene88DT Superalloy during Laser Rapid Forming The Dispersion of MWCNTs within Epoxy by Treatment with Coupling and Dispersing Agents Hot Corrosion Behavior of AlCuFeCr Quasicrystalline Coating on Titanium Alloy with the Mixture of NaCl and Na2SO4 Deposit

by "Nielsen BookData"

Related Books： 1-1 of 1

Details

Page Top