Advanced Materials and Processing IV : Selected, peer reviewed papers presented at the 4th International Conference on Advanced Materials and Processing, 10-13 December, 2006, Hamilton, New Zealand

Author(s)

    • International Conference on Advanced Materials and Processing
    • Zhang, Deliang

Bibliographic Information

Advanced Materials and Processing IV : Selected, peer reviewed papers presented at the 4th International Conference on Advanced Materials and Processing, 10-13 December, 2006, Hamilton, New Zealand

guest editors: Deliang Zhang ... [et. al]

(Advanced materials research, v. 29-30)

Trans Tech Publications, c2007

  • pbk.

Available at  / 1 libraries

Search this Book/Journal

Note

Includes bibliographical references and index

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). This special volume comprises 85 refereed papers. The selection of the papers was based upon the recommendations of the reviewers and the discretion of the editors. In most cases, the accepted papers were further polished to improve their readability.

Table of Contents

Overview of Current International Magnesium Research and Recent CAST CRC Developments Advanced Wood- and Bio-Composites: Enhanced Performance and Sustainability New Ceramic Membrane Materials for Gas Purification A Ductile UFG Al Alloy via Cryomilling and Quasi-Isostatic Forging Compaction of Ti-6Al-4V Powder by ECAE with Back-Pressure Optimising the Model of Gas-Jet Quenching of a Carburised Gear Metallurgical Nature at the Interface between Tool Shoulder and Workpiece during Friction Stir Welding Multifarious Fracture Features of CuZrAlGd(Ag) Bulk Metallic Glasses Biomechanical and Biocorrosion Properties of Nanostructured Titanium Characterization of Indentation Size Effect of Hardness Using a Loading Curve from Crystalline Materials The Effect of Additives and Substrate Conditions on the Copper Electrodeposition for Thin Film Applications Surface Characteristics of the Anodized and Hydrothermally Treated Titanium Affected by the Current Density, Voltage, and Time Surface Characterization of an Extruded 6060 Al Alloy Mechanical Properties of Directionally Arrayed Dendrites in the Ni3Al Matrix Alloy Mechanical Properties of Micro-Porous Metals Produced by Space-Holding Sintering Growth and Properties of Stannite-Quaternary Cu2ZnSnSe4 Thin Films Prepared by Selenization of Sputtered Binary Compound Precursors Fabrication of High Mg Containing Al-Mg Alloy Sheets by Twin Roll Strip Casting Warm Hydroformability and Mechanical Properties of Pre- and Post- Heat Treated Al6061 Tubes Synthesis and Characterization of Nitrogen Implanted Titanium Alloys Control of Degradation of Biocompatible Magnesium in a Pseudo-Physiological Environment by a Ceramic Like Anodized Coating Sonoelectroplating of Sn - Bi Solder Film from EDTA Bath Microstructure of Rapidly Solidified Ti-46Al-2Cr-2Nb-xY Alloys Studies on Porous Titanium Alloy Implant Manufactured by Three Dimensional Solid Freeform Fabrication System Influence of Reaction Temperature for the Manufacturing of Al-3Ti and Al-3B Master Alloys and their Grain Refining Efficiency on a Al-7Si Alloy Enhancing Fatigue Properties of Nanostructured Metals and Alloys Microstructural Modification of Metallic Materials by Electromagnetic Processing and the Theoretical Interpretation Approaches to the Design and Processing of Novel Titanium Alloys Microstructure and Morphology of Alumina-Iron Nanocomposite Powders Produced by High Energy Mechanical Milling Characterisation of Ti(Al,O)-Al2O3 Composite Powders and Thermally Sprayed Coatings Ultrafine Grained Ti-47Al-2Cr (at%) Alloy Prepared by High Energy Mechanical Milling and Hot Isostatic Pressing Effect of Composition on the Morphology and Hardness of Nanostructured Cu Based Composite and Alloy Powders/Granules Produced by High Energy Mechanical Milling A Novel Process for Lowering the Cost of Titanium Effect of Carbon Addition on the Microstructure and Properties of M3:2 High Speed Steels Processed by Powder Metallurgy Consolidation of TiAl Powder by Thermal Spray Processes Syntactic Foams Consolidated with Starch: Modelling for Pre-Mould Processing Syntactic Foams Consolidated with Starch: Mixing Behaviour for Post-Mould Processing Chemical Imaging of the Spatial Distribution and Interactions of Tannin Dispersal in Bioplastic Systems New Strategy toward Novel Hyperbranched Phenol-Formaldehyde Resin: Synthesis, Characterization and Curing Study The Use of Aqueous Urea as Chemical Denaturant in Processing CGM into a Biodegradable Polymer Material Production of High Purity Alumina and Zeolite from Low-Grade Kaolin Control of Shell Thickness in Silica-Coating of AgI Nanoparticles Triethanolamine Molybdate, a New Polymeric Precursor for Molybdenum Nitride Polycondensation of Urea and Boric Acid to Give Polyborate Ester, a Precursor for Boron Nitride Processing of Mullite Whiskers from Kaolin Joining of Ceramic Components in the Green State via LPIM Synthesis and Characterisation of Titania Nanotubes: Effect of Phase and Crystallite Size on Nanotube Formation Highly c-Axis Oriented Al-Doped ZnO Thin Films Grown in Premixed H2/Ar Sputtering Gas Fabrication and Microstructure Evaluation of Oxide and Carbide Ceramic Coatings onto Heterogeneous Substrates by Solid-Vapor Reaction Orientation Control in Multilayered Alumina Prepared Using Electrophoretic Deposition in a Strong Magnetic Field Direct Shaping of Alumina Ceramics by Electrophoretic Deposition Using Conductive Polymer-Coated Ceramic Substrates Transformation of Bone Origin Hydroxyapatite at Elevated Temperatures and in Selected Atmospheres High-Frequency Induction Heating Sintering of Ultra-Fine Al2O3-(ZrO2+X%mol Y2O3) Bioceramics Thermal, Mechanical and Morphological Performance of BisGMA/TiO2 Nanocomposite Tensile Deformation and Fracture in a Bulk Nanostructured Al-5083/SiCp Composite at Elevated Temperatures Fabrication of Al-Si-Cu-Mg-Zn Alloy Matrix Composite Reinforced with Submicrometer Sized Al2O3 Particles Formed by Displacement Reaction Environmentally Intelligent Biocomposites Preparation and Characterization of Alumina/TZP Particulate Composites Deformation Behaviour of Composites Reinforced with Four Different Linen Flax Yarn Structures Fabrication and Characterization of Polypropylene/Ethylene-Octene Copolymer Blend Nanocomposites Fabrication and Characterization of Sisal/Glass and Polypropylene Hybrid Composites Thermal, Morphological and Dynamic Mechanical Characterization of Melt Blended PC Nanocomposites Rheological Characterization of Jute/HDPE Composites The Abrasive Wear of Alumina Matrix Particulate Composites at Different Environments of Work Improving Hygrothermal Performance in Epoxy-Biofibre Composites MWNT Polymer Nanocomposites Based on P3HT Intercalation of Montmorillonite by Interlayer Adsorption and Complex Formation On Feasibility of Ply-Layup Orientation in CF/Epoxy Composite Laminates Using Rayleigh Probes Evaluation of the Mechanical Properties of Injection Moulded Hemp Fibre Reinforced Polypropylene Composites Natural Fibre-Reinforced Thermoplastics Processed by Rotational Moulding Numerical Study of Functionally Graded Materials Accelerated Weathering of Modified Wood Flour Plastic Composites Influence of Alkali Treatment on the Interfacial Bond Strength of Industrial Hemp Fibre Reinforced Epoxy Composites: Effect of Variation from the Ideal Stoicheometric Ratio of Epoxy Resin to Curing Agent The Effects of Residual Lignin Content on Wood Fibre Reinforced Polypropylene Composites Electrical Spectroscopy Studies of Organic/Inorganic Nano Composites Improvement of the Red Mud Polymer-Matrix Composites by Organophillization of Red Mud Hemp Fibre Reinforced Poly(Lactic Acid) Composites Natural and Man-Made Cellulose Fiber Reinforced Hybrid Polypropylene Composites: Effect of Fire Retardants Comparative Study of Copper Diffusion in Plasma Treated Low-k Dielectric Thin Film Using XPS and SIMS Growth and Evaluation of GaN Grown on Patterned Sapphire Substrates Characteristics Comparison between GaN Epilayers Grown on Patterned and Unpatterned Sapphire Substrate (0001) Electrical Properties of Mn-Co-Ni Oxides Prepared at Low Temperatures Actuation Behavior of CP Actuator Based on Polypyrrole and PVDF A Novel Nano-Water-Purifying Material Characterization of Quasi-Nano Crystalline Ni-Zn Ferrite Powders Prepared by Self-Propagating High Temperature Synthesis Durability and Performance of Indigenous Amorphous Silica in Advanced Cementitious Systems

by "Nielsen BookData"

Related Books: 1-1 of 1

Details

Page Top