Advances in fracture and material behavior : selected, peer reviewed papers of the seventh international conference on fracture and strength of solids, (FEOFS2007), Urumqi, China, August 27-29, 2007

著者

書誌事項

Advances in fracture and material behavior : selected, peer reviewed papers of the seventh international conference on fracture and strength of solids, (FEOFS2007), Urumqi, China, August 27-29, 2007

(Advanced materials research, 33-37)

Trans Tech Publications, c2008

  • :set
  • pt. 1
  • pt. 2

大学図書館所蔵 件 / 1

この図書・雑誌をさがす

内容説明・目次

内容説明

This work on the fracture, fatigue and strength of materials comprises 238 peer-reviewed papers covering new ideas and up-to-date results. It is anticipated that this special volume will stimulate and enhance progress in fracture mechanics, materials behavior and computational science research, as well as advancing fundamental understanding in these fields. Volume is indexed by Thomson Reuters CPCI-S (WoS).

目次

Committees, Sponsors Preface Fracture Mechanics and Mechanisms Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moire Interferometry Effect of Cooling Rate on Strength and Fracture Surfaces of Alpha Brass Casting Effects of Distance and Alignment Holes on Fatigue Crack Behaviors of Cast Magnesium Alloys Research on the Plastic Work Rate Consumed in the Process Zone for the Growth of Triaxial-Stress-State Crack Study on Ductile Fracture Including Shear-Lip Fracture under Mixed Mode Loading Condition Fracture Analysis for Damaged Aircraft Fuselage Using Substructure Method Experimental Investigation of the Size Effects on the Fracture Toughness and Tearing Modulus Torsion Fracture Behavior of Drawn Pearlitic Steel Wires with Different Heat Treatments Analysis of Interfacial Debonding of RC Beams Strengthened with CFL Fatigue Crack Growth Simulations and Experimental Findings for SEN-Specimens under Different Loadings Regular Fracture Control of Pressed Notch Bar under Three-Point Bending Fracture Mechanics Analysis on Smart-Cut (R) Technology: Effects of Stiffening Wafer and Defect Interaction Examination of the Optimal Local Model Size of Structure with a Surface Crack in the 3-D Local Hybrid Method Probabilistic Fracture Mechanics Analysis for Optimization of High-Pressure Vessel Inspection Study on the Stress Intensity Factor for Mixed Mode Surface Crack under Three Point Bending Different Delamination Cracks during Fracture and Their Influences on the Fracture of X70 Pipeline Steel Crack Tip Plasticity By Classic Dislocation Dynamics Effective Use of Commercial FEM Software in 2-Dimentional Crack Problems Fatigue and Crack Propagation Fatigue Analysis for CNG Storage Gas Pressure Vessel Based on ANSYS Uniaxial Ratchetting-Fatigue Interaction of Tempered 42CrMo Steel and its Failure Model Effect of Size and Location of a Weld Defect on Fatigue Life for Argon-Arc Welded Titanium Alloy Joint The Failure Process Analysis on a Numerical Model of a Branching-Out Tunnel under Lateral Overload Action Fatigue Crack Growth Simulation Using S-Version FEM Stress Classification and Fatigue Life Assessment of Modular Component with Asymmetric Perforated Parts In Situ Observation of Fatigue Crack Growth and 90 Domain Switching for BaTiO3 Ferroelectric Single Crystal under Cyclic Electric Loading Fatigue Life of Multi-Lap Welding of Automotives Steel Sheet by QSTS Fatigue Life Evaluation of Spot Weldment Using GA and FEM Experimental Study on Fatigue Life of Steel Beams Strengthened with a CFRP Plate Experimental Study on the Fatigue Properties of RC Beam Strengthened by Prestressed CFL Crack Growth Life Estimating for MSD Panel Peculiarity of Accelerated Propagation of Fatigue Crack for Medium Carbon Steel under Variable Amplitude Loading Evaluation of Fatigue Crack Growth of Interacting Surface Cracks Prediction of the Fatigue Life Based on Stiffness Degradation Concept Effect of Load Direction on Crack Propagation in High-Temperature Fatigue of Directionally Solidified Superalloy Fatigue Analysis of Locking Parts in the Gauge-Adjustable Wheelsets System Considering the Variation of the Fatigue Strength Probabilistic Analysis of Cracked Structures With Uncertainty Parameters Fatigue Behaviors of a NiCrAlYSi Coated Directionally Solidified Nickel Base Superalloy Strain and Martensitic Phase Distributions around Fatigue Cracks in SUS304 Stainless Steel Study of Fretting Fatigue Crack Initiation For Riveted Al 6xxx Components Optimization of Integrally Stiffened Panels Based on Crack Propagation Life Fatigue Life of Thread Connection for Casing Drilling under Tension and Torsion Experimental Study on Fatigue Crack Growth and Residual Strength of Steel 30CrMnSiNi2A under Mixed Corrosive Environments Fatigue of Metal Free Reed due to Self-Excited Oscillation Characterizing Fatigue Crack Closure by Numerical Analysis Damage Tolerance and Fracture Control Damage Identification of Multi-Type Joints with Using Electro-Impedance Method by Smart Sensors Improved Impedance Method and Guided Wave Technique for Damage Assessment of Beam Structures Using PZT Patches Residual Strength Analysis of Stiffened Aluminum Panels with Widespread Fatigue Damage Study on the Damage Tolerance of a Stiffened Panel with a Skin Pad Interface Failure and Delamination Evaluation on Interface Fracture Behavior of HVAS Coating/Substrate System Based on Weibull Stress Criterion Subsonic Interface Crack with Crack Face Contact Location of Initial Debonding and Stress Singularity at Interface End Analysis of the Load-Carrying Capability of the Casing Plug Joint of Steel Tube Structures Considering the Contact Effect Interfacial Fracture Analysis of Adhesive-Bonded Joints Interaction between a Rigid Cylinder with a Piezoelectric Half-Space with Partial Adhesion Peeling Rate Dependency of Delamination Behavior of Adhesives Dynamic Fracture and Impact Problem Compressive Properties for Alumina Subjected to Shock Loading Research on Mode I and Mode II Dynamic Fracture in High Strength Steels under High Loading Rates Effect on Dynamic Biaxial Fracture Behaviors by Different Heat Treatments on Magnesium Alloy Numerical Solution of Elas-Plastic Impact Load of Tube Column Hierarchical Adaptive Mesh for FEM Simulations of Ultra High-Speed Impact Problem Finite Geometrically Similar Element Method for Dynamic Problem of a Cracked Specimen Evaluation and Characterization of Plastics-Made Sheet Type Components under Impact Behavior of Thin-Walled Square Tube and Tubular Hat Sections Subjected to Low Velocity Impact Loading Analysis of the Anti-Bird Impact Performance of Typical Beam-Edge Structure Based on ANSYS/LS-DYNA Study of Initiator's Shock-Resistibility Through Impact Using Hopkinson Pressure Bar Creep Problems and Modeling A Study of Creep Properties of Polymer Bonded Explosives Analysis of Finite Element Viscoelastic Displacement Based on Kelvin Model Experimental and Numerical Study of Cyclic Creep of Cast Magnesium Alloy at High Temperature Numerical Back Inversion Method of Compressive Creep Parameters of Rock Masses under Rigid Bearing Plate and its Application Shrinkage Cracking Test and Analytical Model for Concrete Considering Creep Behaviour at Early Age Numerical Simulation of Void Growth Induced Creep Rupture in HAZ at Elevated Temperature Composite, Ploymer, Ceramics and Metallic Materials Dynamic Behavior of Tungsten Alloys Influences of RE-Ti Composite Modification on the Structure and Properties of W6Mo5Cr4V2 Alloy Influence of Heat Treatment on Structures and Mechanical Properties of Cast Fe-B-C Alloy Multiaxial Electromechanical Couple Behavior of Ferroelectric Ceramic PZT53 Phase Field Simulation of Rafting Behavior of `Phase in Nickel Base Superalloy Experimental and Analytical Study on the Mechanical Behavior of Stitched Sandwich Composite Panel with a Foam Core Subsurface Deformation of Worn Al-Cu and Al-Mg Alloys Microstructure and Grain Abrasion Properties of TiC-xNi Coatings Prepared by Electro-Thermal Explosion Ultra-High Speed Spraying Growth Characteristic and Fracture Toughness of Laser Rapidly Solidified Al2O3/YAG/ZrO2 Ceramic Eutectic In Situ Composite Nonlinear Bending of Composite Circular Plates with Embedded Shape Memory Alloy Fibers Study on Interfacial Shear Stress in RC Beams Strengthened with Prestressed FRP Laminates Characterization of Expanded Graphite/Flake-Type Graphite Filled Conductive Polymer Composites Study on Softening Property of 30Cr1Mo1V Steel Effect of Austenitizing Temperature and Air Cooling Rate on Microstructure and Properties of the Low Carbon Mn-Si-Cr Steel The Plane Problem Solution of Piezoelectric Material with a Line Crack Plane Electromechanical Fields in a Piezoelectric Material Containing an Elliptical Hole Strength Behaviour of Polysilicon Thin Film Flexure Hinge Microstructures and Mechanical Properties of Natural Fibers Analytical Solution for the Large Deflection of Fully Clamped Metallic Foam Sandwich Beam Fracture Toughness of PC and PC/ABS Alloy 3D Numerical Simulation of the Deformation of Glassy Polymer Static and Dynamic Properties of AC4C Aluminum Alloy Mechanical Properties of 2-D Lattice Materials Interface Cracking and Particulate Size Effect in Particle-Reinforced Metal-Matrix Composites Experimental and Numerical Simulation of the Mechanical Behavior of Stratospheric Balloons Materials Concrete, Rock and Soil Jet Projectiles Penetration into Multilayer Metal Targets with Large Interval Modeling of Stress-Induced Permeability Evolution and Damage of Rock Model Testing and Analysis Study on Shear Strength of Rock Mass Containing Multiple Cracks under Compression-Shearing Loading Numerical Simulation of Different-Shaped Random Aggregates' Influence on Concrete's Compression Strength Effect of Non-Homogeneity on Limit Bearing Capacity of Rock Block Coupled THM Model and Simulation of the Yucca Mountain and FEBEX Case Study within DECOVALEX-THMC Framework The Thermo-Hydro Coupled Model of Low-Temperature Rock In Consideration of Phase Change Concrete Durability Test Due to Environmental Degradation Using Environment Simulation Technology A Constitutive Model of Anchored Jointed Rock Mass and its Application Study On the Damage Evolution Equation of Rockburst Smart Materials and Structures Effect of Initial Stress on the Behavior of Love Waves in an Elastic Half-Space with a Functionally Graded Layer Deformation Analysis of Shape Memory Alloy Using SEM Scanning Moire Method Study of Mechanical Properties of the Spider Silk Using a Micro-Tensile System and DIC Methods The Moving Crack Problem of Orthotropic Functionally Graded Materials under Antiplane Loading Study on a New Type of Analogue Material for Geotechnical Tests and its Applications Nonlinear Stability of Fixed-Fixed FGM Arches Subjected to Mechanical and Thermal Loads Theoretical Investigation on Horizontally Shear Waves in a Functionally Gradient Piezoelectric Material Plate The Crack-Tip Higher Order Asymptotic Fields for a Mode III Crack in a Functionally Gradient Material Plastic Crushing Behavior of Thin-Walled Spheres Saint-Venant End Effects of Transversely Isotropic Piezoelectric Materials Computational Methods and Modeling Multi-Scale Strength Evaluations of SiC Particle Reinforced Aluminum Alloy by Using FEM Superposition Method Mesh Generation of Revealable and Non-Revealable Multi-Shaped Sub-Domains Hybrid CAD Modeling Theory and Method in Reverse Engineering The Tool Position Generating Algorithm of Intersecting Lines Obtained from Section and Equidistance Surface and Curved Surface Processing A simple Representative Model of the Thoracic Aorta Nonlinear Numerical Analysis and Shear Resistance of Timber Column and Beam--Adobe Composite Wall with Finite Element Method Study on the Gear Modeling in SPH Analysis Numerical Simulation of RSA Seepage Based on Random Structure Model Investigation on Characteristics of Structure and Simulation Analysis for Dragonfly Wing Vein A Computational Approach for the Assessment of Seismic Vulnerability Based on the National Data Infrastructure An Intelligent Modeling Method Based on Genetic Programming and Genetic Algorithm Computer Modelling For 4-Stroke Direct Injection Diesel Engine Design of Microstructures and Structures with Negative Linear Compressibility in Certain Directions Computer Simulation of the Formation of -Precipitates in Nickel-Based Superalloys An Adaptive EFG-FE Computational Model for Thermal Elasto-Plastic Frictional Contact Problems General Post Processing Program for J-Integral Calculation around Arbitrary Shaped Cracks Improvement of Unstructured Quadrilateral Mesh Quality for Multigrid Analysis The Study of Numerical Stability in the SPH Method A Simple Method in Preventing Numerical Fractures of SPH Computations The Numerical Simulation of a Bird-Impact on an Aircraft Windshield by Using the SPH Method An Information-Theoretic Approach for Computational Material Modeling From Frosen Image-Based Bioflow Simulations to Integrative Modeling of Living Interfaces Analysis of Stick-Slip Motion by the Rate-Dependent Friction Model Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials Numerical Limit Analysis of Two Dimensional Structures by the MLPG Method with Natural Neighbour Interpolation Computer Simulation of Irradiation Growth in Zirconium Molecular Dynamics Simulation of Interaction between Screw Dislocation and Copper Precipitate in Iron Three-Dimensional Crack Propagation Analysis Based on VCCM (Virtual Crack Closure-Integral Method) for Tetrahedral Finite Element Development of Parallel CAE System for Large Scale Problems Based on Computer Network Nanomechanics and Nano Structure Study on the Size Effect of the BaTiO3 Nanowires by LGD Theory Atomistic Simulations of Nanoindentation on Cu (111) with a Void Study on Fatigue Crack Nucleation of Electrodeposited Nanocrystalline Nickel Micro Capacitive Tactile Sensor for Contact Loads Mechanical Properties of Single-Walled Carbon Nanotubes - A Finite Element Approach Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics A Modified Model for Simply Supported Ultrathin Films Atomistic Simulation of the Energy Barrier for Dislocation Movement in Si Study of Nanocutting Using Atomic Model Measurement of Young's Modulus and Poisson's Ratio of Thin Film by Combination of Bulge Test and Nano-Indentation Effect of Box Microspring Size on Spring Constant Simulation of Fracture of Nanocrystalline Metals On the Mechanical Properties of Transversely Isotropic Material Using the Nanoindentation Effects of Surface and In-Layer van der Waals Interaction on Mechanical Properties for Carbon Nanotubes Contact and Friction at Nanoscale Stress Field Near a Nanosized Spheroidal Cavity under Bi-Axial Tension Perpendicular to the Revolution Axis Biomechanics and Computational Biology Bone Formation Based on the Turing Model under Compressed Loading Condition The Experimental Study of Mechanics-Heating Effect to Sand-Therapy in the Uyghur Medicine Numerical Simulation of Flows in a Pipe with an Aneurismal Sac (Effects of Aneurismal Models and Stents) Numerical Study on Flow-Adaptive Stents In Vitro Study on Branch Flows with a Cerebral Aneurysm Damage and Fracture Behavior of Cancellous Bone in the Femoral Head Environmental Problems and Fluid Mechanics Relationship Between Sand Ripple Moving Speed and Wind Speed under Local Wind Tunnel Experiment by Using Natural Sand in Taklimakan Desert Numerical Modeling for Sand Desert Morphology and Forming Process in Fixed, Semi-Fixed and Free Desert Field Numerical Simulation of Sand Ripple Formation with Periodically Uniform and Non-Uniform Stream Field Numerical Simulation of Sand Dune Formation with Periodical Uniform Stream Field Numerical Simulation of Sand Cover Phenomenon on the Desert Highway Using SPH Method Flowfield around a Body with Elastic Walls Flow and Dynamic Characteristics between FPD and Contact-Free Handler Nozzles One Method of Fluid-Solid Coupled Interaction Simulation Instability of Heated Panels in Supersonic Air Flow Meso-Macro Scale Behavior Analysis of Polymeric Systems under their Melting States Geomechanics,Geomaterials Integrity and Health Monitoring Materials by Design Kinematical Analysis of Slope Stability Using Triangular Slices Method Elastic-Plastic Mechanics Analysis on Stability of Coal Pillar Stability Analysis of Earth Dam under Unsaturated Seepage Study on Uncertainty and Criterion in Model Optimization of Coupled THM Simulation Intelligent Monitoring Technique for Working Status of Shenzhen Citizen Center Roof Truss Structure under Wind Load Investigation of Simplified Integrated Model for Soil-Pile Dynamic Interaction System Decision-Making Model and Evaluation Architecture for Intelligent Fault Diagnosis Three-Dimensional Elastoplastic Deformation Analysis Coupled With Oil Flow for Perforation Tunnels of an Oilwell Dynamics of Materials and Structures: Computations and Experiments Static and Dynamic Analysis of Wind Turbine Tower Structure Design and Penetration Performance of Annular Shaped Charge Structure Acoustic Emission Signals in the Micro-EDM of PCD Study on Center Hole Deformation Test of Rigid Bearing Plate Characteristics of Buckling and Ultimate Strength and Collapse Behaviour of Cylindrically Curved Plates Subjected to Axial Compression Dynamic Characteristics and Mode Selection of High Tower Analysis and Experiment of Deformation and Limit Load of Thin-Walled Shell Cavities Taylor Series Numerical Method in Structural Dynamics Study on Dynamic Characteristics of the 3-Dimensional Parachute-Like Body with Consideration of Virtual Mass Preliminary Design Analysis of a Hot Gas Duct for the NHDD Program at Korea Vibrations of Sandwich Panels with Pyramidal Truss Cores Experimental and Computational Studies of Twin-Vertical-Tail Buffet Robust Flutter Analysis of an Airfoil with Flap Freeplay Uncertainty Experimental Investigation of the Deformation Behavior of ABS Resin at Elevated Temperature and High Strain Rate Vibration Characteristic Prediction of a Heavy Machinery Suspension Seat Using Multi-Body Dynamic Analysis Method Erosion and Corrosion Erosion Properties of Molybdenum Coatings Sprayed by Electro-Thermal Explosion Ultra-High Speed Spraying Study on Erosion-Resistance of Electro-Thermal Explosion Ultra-High Speed Spraying MoSi2-Based Coatings Erosion Behavior of TiC-xNi Composite Coatings In Situ Synthesized by Electro-Thermal Explosion Ultra-High Speed Spraying Performance Prediction of Pre-Corroded Aluminum Alloy Using Genetic Algorithm-Neural Network and Fuzzy Neural Network Non-Destructive Inspection of Rebar Corrosion in Concrete Structures by Using BEM and GA Nondestructive Corrosion Monitoring in Reinforced Concrete by Boundary Element Inverse Analysis Effective BEM for Corrosion Analysis of Net Structure Numerical Simulation of Corrosion under Different Solution Velocity Thermal Deformation and Thermoelastics Experimental Analysis and FEM Calculation of the Thermal Deformation for the Spindle System of Machining Center Study on Rules in Material Removal Rate and Surface Quality of Short Electric Arc Machining Process Effect of Hot Bar Shape on Temperature Consistency Package Warpage and Stress Evaluation for a Plastic Electronic Package Repeatedly Dehiscence and Residual Stress of Liquefied Gas Spherical Vessel Cyclic Oxidation Behavior of Thermal Barrier Coatings Irradiated by High-Intensity Pulsed Ion Beam Evaluation of Optimal Conditions for D-Tube Brazing Phenomenological Mechanism of Transformation Plasticity and the Constitutive Law Coupled with Thermo-Mechanical Plasticity Research on Hardening the Surface of Laser and Anti-Tempering Property of Cast Steel Hot Roller Structural Optimization and Design Structure Optimization of a Locomotive Support Vehicle Based on FEM Analysis FEM Analysis and Optimization for Welded Metal Bellows Seal Shape Optimization and Strength Evaluation of Metal Welded Bellows Wave of Mechanical Seal Computer Aided Calculation of Welding Microstructure and Optimization of Welding Technological Parameters Analytical Research on FEM and Dynamic Stress Test of Residue Plastic Film Suspension Recycling Machine FEM Analysis and Optimization Design of a Plastic Film Cutting Machine Tool Rest Structure Optimal Analysis and Application in the Design of Ultra-Light Truss-Core Structures A New Global Optimization Algorithm and its Application Development of the Optimized Manufacturing Process Model by "TAGUCHI METHOD" Optimal Control of Sandwich Panels with Pyramidal Truss Cores Based on Energy Criterion Other novel methods of computer modeling in engineering and the sciences Task Scheduling in Multi-Process with Resource Constraints under MG Workflow Manufacturing Grid Workflow Framework and Model The Research of Execute Process and Service Selecting under Manufacturing Grid Workflow Simulation of Data Management in Group Purchasing System Six Sigma Robust Design of Composite Hand for LCD Glass Transfer Robot Study on the Method of Ontological Knowledge Expression of Product Innovative Development and its Application Stability Analysis of Local Thinned Shallow Spherical Roof of Oil Storage Tank Structural Feasibility Study on the Slidable One-Touch Extension Fitting for Plastics Pipes with Virtual Assembly and Experiments Research of Centroid Balance of the Inspection Robot for High-Voltage Transmission Lines An E-Learning System for CAE Web Based CAE System and Knowledge Sharing Framework Using Web 2.0 Technologies

「Nielsen BookData」 より

関連文献: 1件中  1-1を表示

詳細情報

  • NII書誌ID(NCID)
    BA86415240
  • ISBN
    • 9780878493999
  • 出版国コード
    xx
  • タイトル言語コード
    eng
  • 本文言語コード
    eng
  • 出版地
    Stafa-Zuerich, Switzerland
  • ページ数/冊数
    xxiv, 1509 p.
  • 大きさ
    25 cm
  • 分類
    • LCC : TA
  • 親書誌ID
ページトップへ