Low-power high-speed ADCs for nanometer CMOS integration
著者
書誌事項
Low-power high-speed ADCs for nanometer CMOS integration
（Analog circuits and signal processing series / consulting editor, Mohammed Ismail）
Springer, c2008
大学図書館所蔵 件 / 全4件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Bibliography: p. 91-93
内容説明・目次
内容説明
Low-Power High-Speed ADCs for Nanometer CMOS Integration is about the design and implementation of ADC in nanometer CMOS processes that achieve lower power consumption for a given speed and resolution than previous designs, through architectural and circuit innovations that take advantage of unique features of nanometer CMOS processes. A phase lock loop (PLL) clock multiplier has also been designed using new circuit techniques and successfully tested.
1) A 1.2V, 52mW, 210MS/s 10-bit two-step ADC in 130nm CMOS occupying 0.38mm2. Using offset canceling comparators and capacitor networks implemented with small value interconnect capacitors to replace resistor ladder/multiplexer in conventional sub-ranging ADCs, it achieves 74dB SFDR for 10MHz and 71dB SFDR for 100MHz input.
2) A 32mW, 1.25GS/s 6-bit ADC with 2.5GHz internal clock in 130nm CMOS. A new type of architecture that combines flash and SAR enables the lowest power consumption, 6-bit >1GS/s ADC reported to date. This design can be a drop-in replacement for existing flash ADCs since it does require any post-processing or calibration step and has the same latency as flash.
3) A 0.4ps-rms-jitter (integrated from 3kHz to 300MHz offset for >2.5GHz) 1-3GHz tunable, phase-noise programmable clock-multiplier PLL for generating sampling clock to the SAR ADC. A new loop filter structure enables phase error preamplification to lower PLL in-band noise without increasing loop filter capacitor size.
目次
Preface. List of Tables. List of Figures. 1. Introduction. 1 Motivations. 2 A Review of Existing ADC Architectures.
2. A 52mW 10b 210MS/s Two-Step ADC for Digital IF Receivers in 130nm CMOS. 1 Background. 2 Architecture and Circuits. 3 Experimental Results. 4 Summary.
3. A 32mW 1.25GS/s 6b 2b/Step SAR ADC in 130nm Digital CMOS 47. 1 Background. 2 Architecture. 3 Enabling Circuits. 4 Testing Issues. 5 Experimental Results. 6 Performance Summary and Comparison. 7 Summary.
4. A 0.4ps-RMS-Jitter 1-3GHz Clock Multiplier PLL Using Phase-Noise Preamplification. 1 Introduction. 2 Phase-Lock Loop (PLL). 3 VCO and Clock Buffers. 4 Experimental Results. 5 Summary.
5. Conclusions and Future Directions. References. About the Authors.
「Nielsen BookData」 より
