Multi-functional materials and structures : selected, peer reviewed papers from International Conference on Multifunctional Materials and Structures, July 28-31 2008, Hong Kong, P.R. China

著者

• International Conference on Multifunctional Materials and Structures
• Lau, Alan K. T.

書誌事項

Multi-functional materials and structures : selected, peer reviewed papers from International Conference on Multifunctional Materials and Structures, July 28-31 2008, Hong Kong, P.R. China

edited by Alan K.T. Lau ... [et al.]

（Advanced materials research, 47-50）

Trans Tech, c2008

• pt.1
• pt.2
• set

注記

Includes bibliographic references and index

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Smart Materials are materials that can respond to environmental stimuli by exhibiting particular changes in some of their properties. Depending upon the change in some external condition, a smart materials can change its own characteristics (mechanical, electrical, appearance), structure, composition and/or response. These materials are usually embedded into systems whose inherent properties change favourably in order to meet performance needs.

目次

Preface Thermal Stress Simulations of SOFC Membrane-Electrode Assembly Functionally Gradient 3YSZ-IN713LC Composites Time-Frequency Signal Analysis for Nondestructive Evaluation of Pile with Cap Parametric Study of Machining Effect on Residual Stress and Surface Roughness of Nickel Base Super Alloy UDIMET 720 Nonlinear Acoustic NDE - Qualitative and Quantitative Effects Thermal and Tensile Properties of PP Nanocomposite Blends Formation of Chemical Elements under Superdeep Penetration of Lead Microparticles in Ferrous Target Shape Memory Alloy Combined with Piezoelectric Materials Applied for Structure Vibration Control Sensitivity in Large Deflection of Bossed and Pre-Tensioned Layered Plate under Lateral Load Using FEM Analysis for Evaluating Lifetime of the Turbine Blades Repaired by Different Kinds of Titanium and Nickel Alloys Influence of Secondary Oxide Phases on Microstructural and Gas Sensitive Properties of Nanostructured Titanium Dioxide Thin Films Design of Finish System Using Rotational Magnetic-Assistance in Ultrasonic Electrochemical Finishing of Freeform-Surfaces Development of a Safety Network System for Highway Structures in Korea A Study on the Problems with Long-Term Bridge Monitoring Systems, and Suggested Solutions Sound Transmission through Lightweight All-Metallic Sandwich Panels with Corrugated Cores Development of Miniaturized Piezoelectric Multimode Transducer for Projection Purpose Macroscopic Differential Model for Hysteresis and Butterfly-Shaped Behavior in Ferroelectric Materials Feedback Linearization of Hysteretic Thermoelastic Dynamics of Shape Memory Alloy Actuators with Phase Transformations Characteristics of BNT Films Synthesized by a Hydrothermal Method Electromagnetic Wave Shielding and Fire Retardant Multifunctional Polymer Composites Multifunctional Polymer Composites for "Intellectual" Structures: Present State, Problems, Future Monitoring Vibrating Structures Using PZT Impedance Transducers Development of High Performance Fiber Reinforced Composite with Negative Thermal Expansion Property Prevulcanized Natural Rubber Latex/Modified Lignin Dispersion for Water Vapour Barrier Coatings on Paperboard Packaging Seamless Morphing Wing with SMP Skin Kinetics of Martensitic Phase Decomposition in the Cu-10wt.%Al Alloy with Ag Additions Flame Stabilization and Emissions of a Natural Gas/Air Ceramic Porous Burner Preparation of NbB2-Al2O3In Situ Composites by SHS Involving Thermite Reactions Effects of Particle Size and Size Distribution on the Mechanical Properties of EPDM/Silica Vulcanizates A Novel Dynamic Absorber Using Enhanced Magnetorheological Elastomers for Powertrain Vibration Control Mechanical Behavior of Non Sintered and Sintered Steel Wool Experiments and Numerical Simulations of Interlocked Materials Temperature Effects on Guided Wave Structural Damage Detection Improvement of Fatigue Strength and Impact Properties of Plain-Woven CFRP Modified with Micro Fibrillated Cellulose Active Vibration Control of Smart Hull Structure Using Piezoelectric Composite Actuators Design and Control of Magnetorheological Fluid-Based Multifunctional Haptic Device for Vehicle Applications Damping Force Control of MR Damper for a Passenger Vehicle Considering Hysteretic Compensator Natural Fiber Reinforced Plastic Foams from Plant Oil-Based Resins A Planar Dielectrophoretic Microdevice for Particle Manipulation Development of a Variable Stiffness and Damping Isolator Using Magnetorheological Fluid Technology Potentials of Plastic Optical Fibers for Sensor Technology Multifunctional Materials via Molecular Self-Organization into Liquid-Crystalline Phase The Influence of the Marine Bacterium Vibrio Natriegens Growth on Metallic Corrosion as Studied by Microscope Technologies Super-Hydrophobic Surfaces Improve Corrosion Resistance of Fe3Al-Type Intermetallic in Seawater Investigation on Fe3Al Corrosion Behavior in Simulating Marine Biofilm Environment Cellular Morphology, Peel Strength and Thermal Conductivity for Wood/NR and Expanded EPDM Laminates for Roofing Applications The Influence of Aging Treatments on the Notched Tensile Strength of Ti-6Al-6V-2Sn Laser Welds A Smart Flow Sensor for Flow Direction Measurement Date Palm Tree Fiber as Polymeric Matrix Reinforcement, DPF-Polypropylene Composite Characterization Synthesis of Bi0.5(Na0.7K0.2Li0.1)0.5TiO3 Powders through Molten Salt Method Facile Synthesis of Conducting Polypyrrole/Non-Aggregated Magnetite Nanocomposites and their Magnetorheological Characteristics Quantum Chemical and Electrochemical Studies on the Inhibitive Effect of Carboxymenthylchitosan for Mild Steel in Different PHs Multifunctional Performance of Europium-Doped Feldspar Ceramics The Effect of Calcium Sulfate with Alloplast on the Periodontal Regeneration in One-Wall Intrabony Defect of Beagle Dogs A Study on Ultrasonic Vibration Assisted Tapping of Titanium Vibration Damping of Automotive Driveshafts with Piezofiber Composite Structures Positive Temperature Coefficient Behavior of the Graphite Nanofibre and Carbon Black Filled High-Density Polyethylene Hybrid Composites Swelling Behavior of Poly(Acrylamide) Nanoclay Composite Hydrogels Miscibility Behaviour of Polyethylene Oxide/Hydroxypropyl Methyl Cellulose Blends Synthesis, Characterization of Phenethyltrimethoxysilane (PE) Modified Organic-Inorganic Hybrid Silicalite-1 Molecular Sieves and its Transformation into Solid Acid Materials Magnetorheological Fluids Behaviour in Tension Loading Mode Stick-Slip Compensation of Micro-Positioning Using Elastic-Plastic Static Friction Model Crack Growth Characteristics Evaluation Method in Ceramics Based on DT Technique Strain Transfer Models for Strain Actuators Solution-Responsive Shape-Memory Polymer Driven by Forming Hydrogen Bonding Novel Magnetostrictive Bimetal Actuator Using Permendur Micro-Forming of Au49Ag5.5Pd2.3Cu26.9Si16.3 Metallic Glasses in Supercooled Region Fabrication and Characterization of Microscale Sensors for Strain Measurement in Flexible Polymer Heart Valve Leaflet Microstructure and Mechanical Properties of 0.63C-12.7Cr Martensitic Stainless Steel during Various Tempering Treatments Fracture Behavior of Polypropylene /Elastomer Blends Self-Healing of Cracks in Epoxy Composites Melamine Resin-Walled Microcapsules Containing Styrene: Preparation and Characterization Synthesis and Characterization of a Novel Epoxy with Improved Processability Preparation and Characterization of a Novel Flame Retardant Analysis of the Novel Strain Responsive Actuators of Silicone Dielectric Elastomer Mechanical Properties of Polybenzimidazole Reinforced by Carbon Nanofibers Health Monitoring of Laminate Plates with AE Signals and Wave Propagation Fabrication of Titania Film on NiTi Alloy by a Deposition-Assisted Advanced Oxidation Method Effects of Electro-Fenton Process on Blood Compatibility and Nickel Suppression of NiTi Shape Memory Alloy Preparation and Properties of Nano-Silica Filled Self-Reinforced Polypropylene Development of the Green Composite Consists of Woodchips, Bamboo Fibers and Biodegradable Transport and Magnetic Properties of CrO2-Polymer Magnetic Composites Oxide Films Produced on Fe19Cr5Al Steel Coated with Al, Pt and Al+Pt Composite Nanofilms: Technological Aspects and Catalytic Properties Catalytic Destruction and Removal of Toluene by Microwave/Fe3O4 System Using Catalyst and Electrolysis Diaphragm Method to Produce Multiple Oxidants to Remove the Scaling and Slime in Cooling System Bio-Chemical Sensor Based on Smart Material Study on Semi-Solid Magnesium Alloy Fabricated by Ultrasonic Stirring Method Optimization of Preparation of the TiO2 Photocatalytic Reactor Using the Taguchi Method Synthesis and Characterization of Bamboo-Like Carbon Nanotubes Preparation of Silica Nano-Rods by CVD Synthesis of Mono-Sized Silica Nanoparticles by Combustion Technique Synthesis of Straight Y-Shaped Silica Nanorods Optimization of Dimensions of a Sandwich Structure Using Genetic Algorithm (GA) Effect of Substrate Temperature and Incident Energy for Alloyzation of Co onto Cu(001) Substrate Three-Dimensional Charge Redistribution of Ionic Polymer-Metal Composites with Uncertainty in Surface Conductivity InGaP/GaAs pnp Heterojunction Bipolar Transistor with -Doped Sheet between Base-Emitter Junction Thermal Post-Buckling Analysis of Functionally Graded Panels in Hypersonic Airflows Distributed Pressure Sensing as Smart Mat Applications with Hetero-Core Fiber Optic Nerve Sensors Superdeep Penetration as the New Physical Tool for Creation of Composite Materials Effect of Flame Retardant on Mechanical Properties and Flammability of Sisal/PP Composites Fiber Bragg Gratings Array for Structural Health Monitoring Precision Transfer and Replication of Ultrasonic Nanoimprint Thermal Degradation of Novel Exfoliated PLLA/LDH Nanocomposites Application of Schottky Bulk-Layer Design on Double-Heterojunction Pseudomorphic AlGaAs/InGaAs/AlGaAs High Electron Mobility Transistors (DH-HEMTs) Superdeep Penetration of the Microparticles Accelerated by Explosion in Metals and Alloys of Iron Natural Rubber and EPDM Rubber as an Impact Modifier in Vetiver Grass-Polypropylene Composites An Impact Events Monitoring System for Wind Turbine Blades Bionanocomposites of Grass Analysis for Replication and Surface Roughness of Micro-Feature of Silicon Mold Insert by UV-LIGA Method Effect of FGM on Film Quality of Al onto Cu(001) Substrate by Considering Incident Energy and Deposition Rate Influence of Low-Level Oxidation on Mechanical Property of Two-Dimension Carbon/Carbon Composites Study of the Decrease in Adhesion Force between Chloride-Isobutene Rubber and Stainless-Steel by Plasma Treated on the Rubber Surface Shape Memory Characteristics of Ti50Ni50-xCux(x=35, 40) Alloy Strips Surface Modification of Ti Dental Implants by Grit-Blasting and Micro-Arc Oxidation Photocatalytic Degradation of Methylene Blue Using Porphyrin/TiO2 Complexes Activated by Visible Light Electromagnetic Shielding of Multi-Walled Carbon Nanotube/Epoxy Nanocomposites A NOx Sensor Based on Solid-Electrolyte Impedance Transducer Mathematical Modeling of Thin Multiphysical Structures Mechanical and Morphological Properties of Sisal/Glass Fiber-Polypropylene Composites Chicken Eggshell as a Filler for Polymer Composites: Preparation and Characterizations Optimization of Crack-Free Polytypoidally Joined Si3N4-Al2O3 Functionally Graded Materials (FGM) Using 3-Dimensional Modeling Structural Transition of Stabilized Martensite in CuZnAl Alloy A Comparative Study of the Hydrostatic Performances of 1-3 Piezoelectric Composites with a Porous Matrix Friction Characteristic of Sliding Direction and Angle of Micro-Grooved Crosshatch Patterns under Lubricated Contact Vascularized Multi-Functional Materials and Structures TEM Studies on the Microstructure in Ferromagnetic Shape Memory Alloys Experimental Observation on Domain Front Morphology in NiTi Microtube during Tensile Unloading Fabrication and Simulation of a Ni-Al2O3 Crack-Free Joining for Multiple Metal-Ceramic Composites Using a New Functionally Graded Material (FGM) Method The Application of Thermosensitive Magnetic Nanoparticles in Drug Delivery Light-Induced Functional VO2 Films Effects of EPON on Mechanical and Thermal Properties of Epoxy Resins Microstructure and Tribological Performance of a-CNx /TiNx Composite Films Prepared by Pulsed Laser Deposition The Preparation and Application of Shell Powder in UHMWPE-Fiber Unidirectional Plate Effects of Temperature on Microstructure and Tribological Performance of a-CNx Films Prepared by Pulsed Laser Deposition Structure and Mechanical Properties of Ceramic Coatings Fabricated by Micro-Arc Oxidation Fabrication of Poly(diphenylsilylenemethylene) Matrix Nanocomposite Thin Films by Laser Ablation Synthesis and Properties of Barium Strontium Titanate Thin Films on Copper Foils Carbon Foam with High Strength and High Thermal Conductivity Doped by Nano-Titanium Structure, Magnetic and Transport Properties of MnxGe1-x Asymptotic Derivation of a Curved Piezoelectric Interface Model and Homogenization of Piezoelectric Composites Microstructures and Magnetic Properties of Nanocomposite FePt Multilayer Films Microstructures and Magnetic Properties of Sputtered Expitaxial Co3Pt/Pt Multilayer Films Effect of N2 Partial Pressure on the Microstructure and Texture of MgO Films Deposited by Rf-Magnetron Sputtering Tensile and Fatigue Testings of Hybrid Al/APC-2 Nanocomposite Laminates at Elevated Temperature Effect of Tin Content on the Microstructure and Property of Brazed WC-Co/CrMo Alloy Steel Joints Structural and Magnetic Properties of Cobalt and Aluminum Co-Doped ZnO Powders Resorbable Metallic Implant: Findings from an Animal Model Dynamic Response of Functionally Graded Circular Cylindrical Shells Impact Behavior of Cracked Plate Repaired with Composite and FML Patches Preparation and Tribological Properties of Amorphous Ti/C Multilayers by Pulsed Laser Deposition Nickel Foam-Supported NiO/Ag Porous Spheres Prepared by Electrodeposition as Anode for Lithium-Ion Batteries Electrochromic and Electrochemical Properties of Nickel Oxide Thin Films Prepared by a Modified Sol-Gel Method Implementation of Magnetostrictive Material Terfenol-D in CNG Fuel Injection Actuation Enhancement of Gas Response of ZnO Micro-Nano Structured Layers through Plasma Treatment Novel Surfactant Free and Solid State Polymerization to Dendritic Polyaniline Nanofibers Synthesis and Characterization of Luminescent Rod-Coil Poly[2,7-(9,9- Dihexylfluorene)] - Block-Poly(2-(Dimethylamino) Ethyl Methacrylate) by Atom Transfer Radical Polymerization Preparation of Nanoporous Mondispersed Silica Nanoparticles Films Using Poly(styrene)- Block-Poly( 2-Vinyl Pyridine) as Template Microstructure and Properties of Polyimide /Monodispersed Colloidal Silica Hybrid Films Prepared by Sol-Gel Process Preparation and Patterning of Optical Hybrid Thin Films Based on Photosensitive Polyimide and Monodispersed Colloidal Silica Synthesis of Green-Emitting Phosphors by Bicontinuous Cubic Phase Process Synthesis and Characterization of Photopolymerized Poly(acrylic)/Monodispersed Colloidal Silica Hybrid Thin Films Imaging Laminar Damage in Plates Using Lamb Wave Beamforming Effect of Nitrocarburized Layer on the Resistivity Properties of Stainless Steels Polycarbonate with Pineapple Leaf Fiber to Produce Functional Composites Effect of Pretreatment on Properties of Coir-Based Green Composite Effect of Brazing Temperature on the Microstructure and Property of Vacuum Brazed WC-Co and Carbon Steel Joint Effects of Nitriding Processes on the Mechanical Properties of SACM 645 Steel Influence of Radialization Dosage on Shape Memory Effect of Polystyrene Copolymer Tensile Deformation Behaviours of Nylon 6 Based Nanocomposites X-Ray Micro-Tomography as a Tool for Quantitative Characterization of Advanced Materials Manufacturing Processes Wear Behaviors of Nano Grained Aluminum Alloys Magnetic and Relaxation Properties of (CO45Fe45Zr10)x(Al2O3)1-x Thin Films The Technique for Fabricating Submicron Moire Grating Using FIB Milling Investigate of Electrical Conductivity of Shape-Memory Polymer Filled with Carbon Black Complex Multifunctional Materials for Special Applications The Preparation and Study on UHMWPE/Epoxy Gel-Spun Fibres Development of a High Performance Peristaltic Micropump Couple Stress Model of Steric Stiffening in Nanoporous Solids Synthesis and Modification of Epoxidized Natural Rubber from Natural Rubber Latex Small Punch Test of Advanced In Situ Synthesized Ti Metal Matrix Composites Synthesis of Locally-Ordered Carbon Nanotube Arrays from Patterned Catalyst by Self-Assembly Technique High-Quality Single-Walled Carbon Nanotubes Synthesized by Floating Catalyst Chemical Vapor Depostion Development of Noble Metal Oxide Electrode for Low Oxygen Evolution A Kinetic Study on the Electrodeposition of Ni-Cr Alloy on Copper for Embedded Resister Layer in PCB Characteristics of Silver Electrodeposition Solution and Silver Film Fabricated by Electrodeposition with Additives for Interconnection Polymer Brush-Stabilized Polyplex for a siRNA Carrier with Long Blood Circulatory Half-Life Preparation and Characterization of Polyurethane/Multi-Walled Carbon Nanotubes Composites with Multi Functional Performance Development of an Ultra-Small Smart Temperature Sensor with Quartz Tuning Fork Resonators Prediction of Inelastic Behavior of Composite Laminates Using Multi-Surface Continuum Damage-Plasticity Real 3D Crack-Front and Crack Trajectory Analyses of Single-Side Repaired Thick Aluminium Panels Exchange Effect in TM-TbCo/RE-TbCo Double Layer Films Magnetic Properties of TbCo/(SiNx/Co)n Films Singularity-Reduced Integral Representations for Discontinuity in Smart Materials Self-Protection Multi-Ring-Architecture Fiber Sensing System The Fabrication of Nanoporous Hydroxyapatite Ceramics Effect of Copper Oxide on the Sintering of Alumina Ceramics The In Vivo Study of Biomimetic Chitosan Substrates' Osteoinduction Effects The Strength Deterioration of Aramid Fiber in High Temperature Effects of Bi Doping on the In15Sb85 Phase Change Recording Thin Film Carbon Nanotube Composites for Vibration Damping Synthetic Biomimetic Carbonate-Hydroxyapatite Nanocrystals for Enamel Remineralization Influence of Ru(II) Bipyridyl Complex on the Photocatalytic H2 Evolution over TiO2 Nanoparticles with Mesostructures Study on the Deformation of TiNi/AlSi Composite Alloy Using DSCM Method Crystallization Behavior of Polypropylene (PP)/ Polyethylene Terephthalate (PET) Composite Fibres The Phenotypes of Osteoblastic Cells on Surfaces with Different Mechanical Properties Dynamic Reinforced of Casting Alloys after Superdeep Penetration Fabrication of Poly(L-Latic Acid) Scaffolds with Wool Keratin for Osteoblast Cultivation Antibacterial and Nontoxic Nano Silver PLLA Composites for Tissue Engineering Microstructural Evolution during Warm Compression of Medium Carbon Steel Quenched Mass-Production of Practical Mussel Adhesive Protein in Escherichia Coli Smart Hybrid Mussel Adhesive Materials for Cell and Tissue Engineering Characterization of a Functionally Graded Hypereutectic Al-Si Alloy Produced by Centrifugal Method Towards a Generalized Macro-Level Damage Model for Unidirectional Composites Process Development of Low-Cost AgNi and AgFe Contact Materials with no Range of Solid Solubility Modeling of the Cyclic Behavior of Shape Memory Alloys during Localized Unstable Mechanical Response Nonlinear Model on Torsional Behaviors of CFRP Strengthened Reinforced Concrete Beams Pseudoelastic Behavior of Cu-Al-Be Shape Memory Wires Subjected to Varied Loading and Unloading Cycles Synthesis and Characteristic of Molecularly Imprinted Polymer Immobilized Mesoporous Silica Sphere for Selective Binding of S-Naproxen High-Temperature Thermal Cyclic Oxidation Behavior of Wide-Gap Brazed IN738 Superalloy Preparation of CuMgAl Hydrotalcite-Like Compounds at Low MII/MIII Molar Ratios Shape-Controlled Synthesis and Characterization of CuS Crystal from a Low Temperature Hydrothermal Route Precise Quantitative Evaluation of Nano-Ordered Intermetallic Compounds in Sn-3.0Ag-0.5Cu Lead-Free Solder Bump by Using TEM Influence of Carbon Sources and Catalytic Precursors on the Products Prepared by Catalytic Combustion Effect of Particle Size of Fully Porous-Coated (FPC) Implants on Osseointegration Effects of Silver Nanostructures on Fluorescence Modulation of Rhodamine B and Fluorescein About the Elaboration and Characterization of Fe-Based Composite with Friction Destination Synthesis of Strontium-Doped Hydroxyapatite Powder via Sol-Gel Method Effect of Slurry Preparation on Physical Properties of Porous Hydroxyapatite Prepared via Polymeric Sponge Method Porous Barium Strontium Titanate-Titania Nanocomposites for Photocatalytic Applications Development of Novel Environment-Friendly Magnesium Alloys Improvement of Microstructural Controllability of Cellular Ceramic for Multifunctional Composites Wetting and Adhesion Behavior of Undulated a-C:H Film Deposited on Nano-Scale Copper Dot Study of Nanometer Al2O3 Composite Electroless Deposit Strengthened by Different Laser Power A Novel Method to Synthesize Nanocrystalline Calcium Phosphates Porous Ceramics for High Temperature Filters Continuum Modeling on Macroscopic Domain Patterns during Stress Induced Phase Transition in NiTi Tubes Preventing Metal Structure from Water-Seepage by Organic Sealants Comparing Research Study on the Dielectric Properties of Hybrid and Porous Polyimide-Silica Films Preparation and Characterization of Functional Geopolymer Preparation of CF/BR Composite Used for Electromagnetic Shielding Synthesis of Si3N4/Polyimide Hybrid Films Preparation of Low-K Fluorinated Polyimide/Phlogopite Nanocomposites Platinum-Ruthenium-Multiwalled Carbon Nanotube-Nafion Nanocomposite for Methanol Electrooxidation Microstructures and Oxygen Reduction of Recycled TiH2 Powders during Sintering Comparison of Bone Formation in Rabbits Using Hydroxyapatite and -Tricalcium Phosphate Scaffolds Fabricated From Egg Shells Plasma Non-Transferred Arc Cladding of Alumina Powder on Mild Steel-Parameters Optimization Using Taguchi Method Statistical Analysis on Bonding Strength and Failure Mechanism of Plasma-Sprayed HA Coating with Reinforced Intermediate Layers Layer-by-Layer Finite Element Analysis of Smart Composite Plates Cuprous Oxide Films Prepared by Using a Microwave Atmospheric Pressure Plasma Torch Composites of Pet and PBT/PP with Bentonite Analytical Solutions for Crack-Tip Higher Order Stress Fields in Thermal Barrier Coating The Discontinuous Higher Order Fields for Anti-Plane Crack at Interface Effect of Electrospun Fibers on the Interlaminar Properties of Woven Composites Functionally Graded Dental Implant and its Effect on Bone Remodeling A Study on Improvement Capture Velocity for Increasing Inhalation Efficiency of Hood in Local Ventilation System Study on Three-Dimensional Thermal Deformation of Aluminum Casting Tire Mold by Numerical Analysis and Experiment Anisotropy Control of Cold Rolled Cu-Ag Alloys Ageing Behavior of Cu-Ag Alloys Microcosmic Growth Process of ZnO Microrods Composite Ceramics Reinforced with Zirconia Nanopowders Bioglasses in the SiO2-CaO-P2O5 System Heat and Fluid Flow Characters of Single-Screw for Extrusion Molding by Finite Element Analysis A Study on Corrosion Defect Evaluation of Painted Metal by Using Nondestructive Tests Ultra-Small Superparamagnetic Iron Oxide Nanoparticles as MRI Contrast Enhancing Agents Novel Synthesis of Ultra-Small Silver Nanoparticles with High Antimicrobial Activity Influence of Annealing on the Magnetic Properties of Fe50Co50 Films A New Method for Temperature Measurement by the Nanometer Particles Characterization of Iron Doped Titanium Nitride Thin Films Prepared by Magnetron Sputtering Toxicology Studies of a Superparamagnetic Iron Oxide Nanoparticle In Vivo Preparation of Aspect Ratio-Controlled Carbon Nanotubes Fabrication of Organic Silk Fibroin/Multiwalled Carbon Nanotube Composite Cryogels by Freeze-Drying Method Multiwalled Carbon Nanotubes-Incorporated Polyurethane Nanocomposites Nanosize Copper Dispersed Ionic Liquids as an Electrolyte of New Dye-Sensitized Solar Cells Sensing of Ethanol with Nanosize FeZnO Thin Films Applications of Cu@C Nanoparticles in New Dye-Sensitized Solar Cells Chemical Structure of Nanosize Copper Wires in MCM-41 Analysis of Infrared Thermography during Tensile Test of GFRP Thermal Viscoelastic Analysis of 3D Fabric Nanocomposites Periodic and Chaotic Motions of a Simply Supported FGM Plate with Two Degrees-of-Freedom Blending of Natural Fibres and Thermoplastics by Screwless Extrusion The Influence of Surface Modification of Multi-Walled Carbon Nanotubes on the Electrical Property of its Polyethylene Composites Preparation, Adhesive Performance and Stability of Natural Rubber Latex Grafted with N-Butyl Acrylate (BA) and Methyl Methacrylate (MMA) Investigating Nanoparticle Effect on the Mode I Fracture Toughness of Glass/Epoxy Composites Diagnostic Imaging for Structural Damage The Effect of Octa(Maleimidophenyl)Silsesquioxane on Thermal and Dielectric Properties of Bismaleimide-Triazine Resins Polycarbonate-Carbon Nanofibers Composites: An Electron Spin Resonance Study Stretching-Induced Orientation for Improving the Mechanical Properties of Electrospun Polyacrylonitrile Nanofiber Sheet Electric Field Distribution in Macro Fiber Composite Using Interdigitated Electrodes Two-Dimensional Fractal Structures of Metal Oxides Synthesized at Room Temperature Synthesis and Characterization of Europium Ternary Luminescence Coordination Compound Nanorods Fourier Transform Infrared Study on Sol-Gel Derived Manganese-Doped Hydroxyapatite Fracture Behavior of Natural Fiber Reinforced Biopolymer Matrix Composite Photo- and Thermo-Chromic Study of the Ethylenediamine Trimolybdate Titanium Alloy Ti6Al4V's Corrosion Resistance Behavior by Double Glow Discharge Plasma Hydrogen-Free Carburizing Process Study on Osteoinductivity of Injectable Calcium Phosphate Cement Scaffold Study on the Low-Velocity Impact Behavior of CFRP with Nanoclay-Filled Epoxy Matrix Fabrication of Highly Ordered Titania Nanotubes in Viscous Organic Electrolytes Tensile Properties of Different Silkworm Silk Fibers Preliminary Study on a High Strength Nanoclay/Epoxy Coating for Ocean Engineering Applications Manufacture of a Homogenous Nano-Diamond/Poly (Lactic Acid) Bio-Engineered Composite Production of a Green Composite: Mixture of Poly (Latic Acid) and Keratin Fibers from Chicken Feathers Noise Reduction by Using Composite Plate Plastic Optical Fiber Sensors for Measurement of Large Strain in Geotextile Materials High-Energy Influences of Substance's Flows on Structural Changes in Materials Glass Substrate with UV Imprinted Polymer Moth Eye Structure Study on Non-Halogen Flame-Retarded HIPS with High Strength HIPS Optimal Design of Nanostructures Used in Vibration Control Homogenization, Numerical Analysis & Optimal Design of MR Fluids Variational Approach in Optimal Design of Piezoelectric Sensors & Actuators Application of Three-Dimensional Displacement and Strain Distribution Measurement by Windowed Phase-Shifting Digital Holographic Interferometry Development of Model of the Superdeep Penetration of Microparticles Possible Reasons of Degradation of Elements of Space Vehicle Control-Systems Determination of Damages in Superdeep Penetration and Alteration of Properties of Materials under the Extreme Conditions Characterisation and Novel Applications of Fibrillar Polymer Composites Behavior of CFRP Wrapped Concrete Columns with Partial Deteriorated Strength Nano-Cellulose as Promising Biocarrier Surface Characteristics of Magnesium Alloys Treated by Anodic Oxidation Using Pulse Power Bone-Implant Contact of Surface-Modified Titanium Implants Irradiation of Synthesized Magnetic Nanoparticles and its Application for Hyperthermia Surface Morphological Changes Accompanying Dissolution of Bioactive Glass: Effect of Residual Stress Effect of pH Value on Synthesis of Calcium Phosphates Surfaces Modified by Amphiphilic Copolymer: Preparation and Application Near-IR Sensitive Au-Au2S Nanoparticles with Biocompatibility for Drug Delivery Novel Organic-Inorganic Hybrid Nanoparticles as Non-Viral Gene Vector Bioassay Based on Photonic Crystal Distinctive Degradation Behaviors of Electrospun PGA, PLGA and P(LLA-CL) Nanofibers Cultured with/without Cell Culture A Retrievable Polymer Urethral Stent for Treatment of Urethral Strictures Activation of MAPK and NF- B Induced by Biomaterials in Vascular Endothelial Cells An Evaluation of CaF2 Doping Tricalcium Silicate as Dental Restorative Materials Construction of Nonbiofouling Biofunctional Glass Surface by Self-Assembled Monolayer and Graft Hydrophilic Polymer Poly(L-Lactide)/Multiwalled Carbon Nanotube Composites: Interaction with Osteoblast-Like Cells In Vitro In Vitro Bioactivity of Potassium Titanate Whiskers Kinetic Effect of Cationic Comb-Type Copolymers on DNA Hybridization Bio-Fabrication of Patterned Cellulose Nano-Fibers Electrospinning Nanocomposite Nanofibers of Hydroxyapatite/Chitosan Plasma Polymerized Thin-Films for Biosensors The Design of Novel Scaffolds by Integrating Microbial Cellulose onto Plasma Treated Polypropylene Study on Blood Compatibility of SIS Modified by Plasma Surface Grafting An Experimental and Computational Study on Zn-Substituted Hydroxyapatite Biocompatibility and Osteogenesis of Calcium Phosphate Cement Scaffolds for Bone Tissue Engineering Electrochemical Deposition of Fluoridated Calcium Phosphate Thin Film on Titanium Substrates Deformation and Fracture of Bone Analogue Biomaterials Having Different Polymer Matrices Totally Biodegradable and Osteoconductive Composite Material Consisting of Polyhydroxybutyrate and Tricalcium Phosphate for Bone Tissue Repair In Vitro Degradation and Protein Adsorption Characteristics of PHBV/PLLA Blends and PHBV/PLLA-Based Tissue Engineering Scaffolds Characteristics and Chemical Stability of the Bioactive Titania Layer Formed on Ti, Ti-6Al-4V and NiTi SMA through a Low Temperature Oxidation Process Investigation of Platelet Adhesion Behavior on Si-N-O Films Synthesized by Unbalanced Magnetron Sputtering Adsoption CD34 Antibody onto the Col/Hep Coating Film on Titanium to Improve Cytocompatibility of Titanium Deposition of Diamond-Like Carbon Films on Polyoxymethylene Substrates by Magnetic Filtered Cathodic Vacuum Arc Deposition Study the Restenosis after Percutaneous Transluminal Coronary Angioplasty(PTCA) in the Organ Culture System MCP-1 Expression Associated with Inflammation and Biomaterials The Biomedical Material of Functional ePTFE Hydrogels by the Cold Plasma Method and Radiation Technique Influence of Hydrogen-Plasma Treatment on Blood Compatibility of Titanium Oxide Films Novel Silicon Based Anodic Spark Deposition Treatment for Dental Implant In Vitro Biocompatibility Study of Nano TiO2 Materials Insertion Behavior of Microneedles for Drug Delivery Microstructure Control and Pseudoelasticity of Ti-Nb-Ge Alloy Effect of Oxygen Content on Microstructure and Mechanical Properties of Ti-Nb-Ge Alloys for Biomedical Application An Investigation into Dual-Source and Dual-Power Electrospinning of Nanofibrous Membranes for Medical Applications Preparation of Lactic Acid Based Polyurethanes Modified by Castor Oil Preparation and Characterization of Golden-Colored Pigments Based on Silver Coated with Metal Oxides Effects of Lead and Boride Inhibitors on the Passivity of Nickel Alloy 600 Surface A Study on the Tribological Behavior of Valve Train System by Low Friction Coating Fabrication of Chemiluminescence Sensor Based on the Funcinalized MWCNT-Nafion Composite Film Radiolytic Deposition of Pt-Ru Catalysts on the Conductive Polymer Coated MWNT and their Catalytic Efficiency for CO and MeOH Synthesis and Characterization of (C, N)-Alloyed Stainless Steel Coatings by High Energy Ion Assisted Magnetron Sputtering Deposition Mechanical Mechanisms of Chemical Mechanical Polishing Tribological Properties of a Partially Transformed Carbon Layer from SiC Effects of Surfactant Concentration on Step Height Reduction of SiO2 in Chemical Mechanical Polishing with Ceria Slurry The Characteristics and Thermal Stability of CrN/AlSiN Multilayer Coatings Effect of Foreign Metal Doping on the Gas Sensing Behaviors of SnO2-Based Gas Sensor Deposition of Pd onto SnO2 Nanoparticles-Based Gas Sensors Using a Pd Complex as the Precursor H2 Sensing Performance of TiO2-Based Diode-Type Sensors Characterization of Intercalation Type Organic/MoO3 Nanohybrids and their VOC Sensing Properties Effect of Supported Transition Metal on CO Sensing Performance Using SnO2 in Reducing Atmosphere Resistive Type Sensor Using Ceria Thick Film with Nano Particles Fabrication of Nano Particles on Vertically Aligned Multi-Wall Carbon Nanotubes by E-Beam Evaporation

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA87521538
• ISBN:
  • 9780878493784
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zurich
• ページ数/冊数: 2 v.
• 大きさ: 25 cm
• 分類:
  • DC22 : 624.18
• 件名:
  • LCSH : Buildings -- Congresses
  • LCSH : Building materials -- Congresses
• 親書誌ID:
  • BA24926058