Applications of texture analysis : a collection of papers presented at the 15th International Conference on Textures of Materials (ICOTOM 15), June 1-6, 2008, Pittsburgh, Pennsylvania

著者

• International Conference on Textures of Materials
• Rollett, A. D.

書誌事項

Applications of texture analysis : a collection of papers presented at the 15th International Conference on Textures of Materials (ICOTOM 15), June 1-6, 2008, Pittsburgh, Pennsylvania

edited by A. D. Rollett

（Ceramic transactions, v. 201）

John Wiley & Sons, c2009

タイトル別名

ICTOM 15

注記

Includes bibligraphical references and index

内容説明・目次

内容説明

This volume contains papers presented at The 15th International Conference on the Texture of Materials from June 1-5th, 2008 in Pittsburgh, PA. Chapters include: Thin Films Texture at Non-Ambient Conditions Novel Texture Measurement Techniques Including 3D Complex Oxides Interface Textures Recrystallization Texture Biomaterials Texture Effects on Damage Accumulation Digital Microstructures View information on Materials Processing and Texture: Ceramic Transactions, Volume 200.

目次

Preface xv Acknowledgments xvii THIN FILMS (MICROELECTRONICS, HTSC) The Texture of Thin Nisi Films and Its Effect on Agglomeration 3 K. De Keyser, C. Detavernier , R. L. Van Meirhaeghe, J. Jordan-Sweet, and C. Lavoie Epitaxial Substrates from Ni-Based Ternary Alloys With Cr and W 11 D.P. Rodionov, I.V. Gervasyeva, Yu.V. Khlebnikova, and V.A. Kazantsev Cube Texture Formation in Ni-Pd and Ni-Pd-W Alloys For HTS Tapes 23 I.V. Gervasyeva, D.P. Rodionov, Yu.V. Khlebnikova, G.A. Dosovitskii, and A.R. Kaul Texture of Rapidly Solidified Cu Thin Films Studied by SEM EBSD and TEM 35 R. Zhong, A. Kulovits, J.M.K. Wiezorek, and J.P. Leonard Control of Texture in Polycrystalline Thin Films Used as Data Storage Media 47 David E. Laughlin, Hua Yuan, En Yang, and Chun Wang Influences of Processing Parameters on Microstructures and Microtextures of Au Flip Chip Bonds During Microelectronics Packaging 57 P Yang, C-M Li, D-M Liu, M Hung, M Li, and W-M Mao TEXTURE AT NON-AMBIENT CONDITIONS In Situ Observation of Texture Evolution in Ti-10-2-3 65 Seerna L. Raghunathan, Richard Dashwood, Martin Jackson, Sven Vogel, and David Dye Study of Texture Evolution at High Strain Rates in FCC Materials 73 Nilesh Gurao, Satyam Suwas, and Rajeev Kapoor Texture and Microstructure Development in Copper after Cryogenic Rolling and Heat Treatment 83 A. Haldar, D. Das, and P.P. Chattopadhyay In-Situ EBSD Study of the a-y-a Phase Transformation in a Microalloyed Steel 95 Lischewski, D. M. Kirch, A. Ziemons, and G. Gottstein Texture Changes during Phase Transformations Studied In Situ With Neutron Diffraction 103 Hans-Rudolf Wenk NOVEL TEXTURE MEASUREMENT TECHNIQUES INCLUDING 3D Three-Dimensional FIB-OIM of Ceramic Materials 117 Shen J. Dillon and Gregory S. Rohrer Comparison of X-Ray and EBSD Textures for Back-Annealed AI-Mg Alloys 125 0. Engler A New Method for Quantification of Texture Uniformity of Plate 135 Peter Jepson and Robert Bailey Separating Coincident Electron Backscatter Diffraction Patterns Near Interfaces 147 Josh Kacher, Brent L. Adarns, David Fullwood, and Colin Landon Rapid Texture Determination Based on Two Dimensional X Ray Detector 155 Weimin Mao Semiautomatic Determination of Orientations and Elastic Strain from Kossel Microdiffraction 163 Adam Morawiec, Raphael Pesci, and Jean-Sebastien Lecomte Statistically Reliable EBSD Analysis Method of Grain Boundary Characterization 171 D.H. Kim, J.Y.Kang, D.I. Kim, E.K. Her, S.J. Kim, H.N. Han, K.H. Oh, and H.C. Lee 3D Microstructures and Textures of a Plane Strain Compressed (1 10}4 12> AI-0.3% Mn Single Crystal 181 H. Paul, J.H. Driver, and CI. Maurice Three Laws of Substructure Anisotropy of Textured Metal Materials, Revealed by X-Ray Method of Generalized Pole Figures 189 Yuriy Perlovich, Margarita Isaenkova, and Vladimir Fesenko 3D-Microstructural and Texture Characterization in Different Length Scales 197 Roumen Petrov and Patricia Gobernado Hernandez, Orlando Leon Garcia, Hemant Sharma, and Leo Kestens Local Crystal Rotations of Bulk Grains by High-Resolution EBSD during Hot PSC of AI-0.1 % Mn Polycrystals 205 Romain Quey, David Piot, and Julian Driver Grain Boundary Orientations in a Fe-Mn-Cu Polycrystalline Alloy 213 M. Takashima and P. Wynblatt Development of a TEM-Based Orientation Microscopy System 221 S. Zaefferer and G. Wu COMPLEX OXIDES AND OTHER COMPOUNDS Domain Control Effect on Voltage-Strain in BaTi03 Single Crystal 231 Yoshio Akimune, Kazuo Matsuo, Ryutaro Oishi, and Akira Okada Tentative Simulation of Crystal Rotation for NaCl Structures 239 Hiroaki Masui INTERFACE TEXTURES Grain Boundary Patterns in Dynamically Recrystallized Quartz Aggregates 251 Cristiane Castro and Leonardo Lagoeiro The Correlation between Grain Boundary Character and lntergranular Corrosion Susceptibility of 2124 Aluminum Alloy 261 L. H. Chan, H. Weiland, S. Cheong, G.S. Rohrer, and AD. Rollett Rodrigues-Frank Spaces for Misorientations and Orientation Relationships between Crystals of Any Two Crystallographic Point Groups 269 Youliang He and John J. Jonas Origins of Texture Memory in Steels 281 Bevis Hutchinson and Leo A.I. Kestens A Grain Boundary Analysis of Cemented Tungsten Carbides using OIM 291 Vineet Kumar, Zhigang Zak Fang, S.I. Wright and M.M. Nowell The Effect of Grain and Phase Boundary Misorientation on Nucleation during Solid-state Phase Transformations in a Co-l5Fe Alloy 305 H. Landheer, S.E. Offerman, and L.A.I. Kestens, T. Takeuchi, M. Enomoto, and Y. Adachi Microstructural Modification in a 150-1 5Ni-2.2 Mo-Ti Modified Austenitic Stainless Steel through Twin Induced Grain Boundary Engineering 313 Sumantra Mandal, P.V. Sivaprasad, and V. Subramanya Sarrna Effect of Strain Path and Annealing on Development of Resistance to lntergranular Degradation in Austenitic Stainless Steels 323 V. Randle, R. Jones, T.J. Marrow, and D. Engelberg Evolution of the Grain Boundary Character Distribution in Strontium Titanate during Grain Growth 335 Herbert M. Miller and Gregory S. Rohrer A Model for the Origin of Anisotropic Grain Boundary Character Distributions in Polycrystalline Materials 343 Gregory S. Rohrer, Jason Gruber, and Anthony D. Rollett Nucleation of the Primary A1 Phase on TiA13 during Solidification of a Hot-Dip Zn-1 1% A1-3%Mg-On2%SCi oating on Steel Sheet 355 Kazuhiko Honda, Kohsaku Ushioda, and Wataru Yamada RECRYSTALLIZATION TEXTURE: RETROSPECTIVE VERSUS CURRENT PROBLEMS Textural lnhomogeneity Effect during the Monte Carlo Simulation of the Abnormal Goss Grain Growth in Fe-3%Si Steel Grade HiB 365 T. Baudin, R. Penelle, and D. Ceccaldi Avoiding Roping and Ridging in AA6XXX Sheets: Characterizing the Initial State 373 T.A. Bennett, R.H. Petrov, and L.A.I. Kestens Development of Cube Texture in Cold-Rolled and Annealed Multilayer Tapes for Coated Superconductor Applications 381 P.P. Bhattacharjee and R.K. Ray Effects of Elastic Modulus on Deformation and Recrystallization of High Purity Nb 391 D. Baars, H. Jiang, T.R. Bieler, A. Zamiri, F. Pourboghrat, and C. Compton Through-Process Texture Modeling of AA6016 from Hot Rolling to Final Annealing 399 C. Bollmann and G. Gottstein Cube Texture Due to Dynamic Recrystallization in Pb and Pb-62%Sn Alloys under Equal Chanel Angular Extrusion Processing 409 R.E. Bolmaro, V.L. Sordi, M. Ferrante, WeiMin Gan, and H.-G. Brokmeier Annealing Texture Evolution 421 I.L. Dillamore On the Stability of Recrystallization Textures in Low Alloyed Zirconium Sheets 429 FranCois Gerspach, Nathalie Bozzolo, and Francis Wagner An Analysis of the Texture and Mean Orientation of Aluminium Alloy AA5052 Subjected to Forward and Reverse Hot Torsion and Subsequent Annealing 437 0. Hernandez-Silva, B.P. Wynne, and W. M. Rainforth Evolution of { l l l } Recrystallization Texture in Al-Mg-Si Alloy Sheets Processed by Symmetric and Asymmetric Combination Rolling 445 Hirofumi Inoue, Satoshi Kobayashi, Masayuki Hori, Toshio Komatsubara, and Takayuki Takasugi Effect of External Constraint and Deviation from Ideal Orientation on Development of Rolling Texture in Pure Aluminum Single Crystal Having {loo} <001> Orientation 453 Keizo Kashihara and Hirosuke lnagaki Nucleation and Growth of New Grains in Deformed Quartz Single Crystals 461 Leonardo Lagoeiro and Paola Barbosa Rolling and Annealing Textures of Silver Sheets 469 Dong Nyung Lee, Heung Nam Han, and Se-Jong Kim Function of Layer Thickness on the Microstructural Evolution in Copper of Annealed Roll-Bonded CuNb Composites 481 S.C.V. Lim and A.D. Rollett Influence of Taylor Factor M on Recrystallization of The Cube and Cube-Family Grains in FCC Metal 489 Hiroaki Masui Multi-Cycle Pinch Welding of 304L Tubes: lnhomogeneities in Deformation and Recrystallization Textures and Microstructures 499 C.T. Necker, A.N. Marchi, and M.G. Smith Effect of Mg Concentration on Texture Formation in AI-Mg Alloys during High Temperature Compression 507 Kazuto Okayasu, Hiroki Takekoshi, Masayuki Sakakibara, and Hiroshi Fukutomi Ultra-Fine Grain Austenitic Stainless Steels: Influence of Texture during Recrystallization 515 Angeline Poulon-Quintin, Stephanie Brochet, Jean-Bernard Vogt, Jean-Christophe Glez, and Jean-Denis Mithieux Patterns of Deformation and Associated Recrystallization in Warm/Hot Deformed AA6022 523 S. Raveendra, S. Mishra, H. Weiland, and I. Samajdar Studies on Texture and Microstructure of Cryorolled and Annealed Cu-5%AI, Cu-5%Zn Alloys 529 V.L. Niranjani, Nilesh Gurao, U. Wendt, S. Suwas, and V. Subramanya Sarma Modeling of Texture Development during Tandem Hot Rolling of AA3 1 03 537 C. Schafer, V. Mohles, and G. Gottstein Texture Modification in Asymmetrically Rolled Aluminum Sheets 547 Jurij Sidor, Roumen Petrov, Alexis Miroux, and Leo Kestens In-Situ SEM/EBSP Analysis during Annealing in AI-Mg Alloys 555 Yoshimasa Takayama, Kazuhiro Morita, Hajime Kato, and Yoshimasa Ookubo Oriented Grain Growth and the Effect of In-Situ Annealing on Texture in AlMn Alloys 561 Caterina E. Tommaseo and H. Klein Subgrain Coarsening of Hot-Rolled AA5005 Aluminum Alloy: A Comparison between EBSD Observations and Monte Carlo 569 Shengyu Wang, Mohammed H. Alvi, and Anthony D. Rollett Influence of Low Angle Grain Boundaries on Recrystallization 577 Myrjam Winning and Dierk Raabe BIOMATERIALS Comparison of Calcite Crystallographic Texture in the Shells of the Rhynchonelliform Brachiopod, Terebratulina Retusa and the Bivalve Mollusc, Mytilus Edulis 587 M.Cusack, A. Perez-Huerta, P. Dalbeck, P. Chung, and M.R. Lee Wear Resistance and Texture Evolution of Ultra High Molecular Weight Polyethylenes during Uniaxial Compression 595 D.S. Li, H. Garmestani, S.C. Davis, L.K. Moss, A.K. Siddiqi, J.B. Guthrie, N. Johansen, and L. Matrisciano Texture and Microstructure of Modern Rhynchonellide Brachiopod Shells-An Ontogenetic Study 605 E. Griesshaber, R.D. Neuser, U. Brand, and W.W. Schmahl Peering Into the Eyes of Trilobites using EBSD 619 C. Torney, M.R. Lee, and A.W. Owen Texture and Anisotropy of MP35N Wire for Conduct Leads 627 Bernard Q. Li and Tom Steigauf Crystallographic Textures from the Exoskeleton of the Lobster Hornarus Arnericanus and Calculation of the Mechanical Properties of the Calcite Phase 637 L. Raue, H. Klein, D. Raabe, and H. Fabritius TEXTURE EFFECTS ON DAMAGE ACCUMULATION Experimental Characterization of the Effect of Crystallography on the Three Dimensional Nucleation and Growth of Fatigue Cracks in Metals 657 J-Y. Buffiere, E. Ferrie, H. Proudhon and W. Ludwig Reversible Texture Transition during Accumulative Roll Bonding 669 Naoya Kamikawa, Xiaoxu Huang, Grethe Winther, Nobuhiro Tsuji, and Niels Hansen Evolution of Grain Boundary Microstructures in Molybdenum by Thermomechanical Processing from Single Crystals 681 Shigeaki Kobayashi, Sadahiro Tsurekawa, and Tadao Watanabe Local Characterization of Void Initiation on IF Steel by FIB-EBSD Technique 693 Orlando Leon-Garcia, Roumen Petrov, and Leo Kestens Experimental and Simulation Study on Texture and Bendability of AA5XXX Aluminum Alloys 701 Y. Liu, Z. Long, X. Y . Wen, S. Ningileri, and S. K Das Some Aspects on Grain Growth in ECAP Deformed and Heat Treated Aluminum 1.2% Hafnium Alloy 709 0. Al-Buhamad, M.Z. Quadir, and M. Ferry Kinetic Measurements of Texture and Microstructural Evolution using Orientation Distribution Function and Residual Stress Relaxation 717 S. Saimoto, J. Cooley, and C. Gabryel Texture and Micro-Hardness Evolution of Submicrograined Copper 725 X. S. Yao, Y . D. Liu, Q. W. Jiang, X. Zhao, and L. Zuo DIGITAL MICROSTRUCTURES A Model of Plastic Spin Taking into Account Grain Interaction During Rolling 735 A. Fourty, J.W. Signorelli, and R.E. Bolmaro CPFEM Investigation of the Effect of Grain Shape on the Planar Anisotropy and the Shear Banding of Textured Metal Sheets 745 Laurent Delannay, Maxime A. Melchior, Anand K. Kanjarla, Paul Van Houtte, and Javier W. Signorelli Modelling of Primary Recrystallization using Digital Microstructures 757 R.E. Loge, M. Bernacki, H. Resk, H. Digonnet, Y . Chastel, and T. Coupez Two-Phase Microstructure Generation in 3D Based on 2D Sections of a Nickel Alloy 771 C.G. Roberts, S.L. Semiatin, and A.D. Rollett Evolution of Local Damage Variable and Its Rate of Strain-Softening Material in Tension Based on Nonlocal Theory 779 X. B. Wang Grain Interaction and Related Elastic Fields at Triple Junction in Low Deformed IF Steel: Micromechanical Model and Reconstruction from EBSD Orientation Data 787 A.A. Zisman, V.V. Rybin, M. Seefeldt, S. Van Boxel, and P. Van Houtte Gradient Matrix Method to Image Crystal Curvature with Discrete Orientation Data: Case Study of Triple Junction in Deformed IF Steel 803 A.A. Zisman, M. Seefeldt, S. Van Boxel, and P. Van Houtte Author Index 815

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA87716082
• ISBN:
  • 9780470408353
• 出版国コード: us
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Hoboken, NJ
• ページ数/冊数: xvii, 818 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA06690812