Smart materials : selected peer reviewed papers from the International Conference on Smart Materials, Smart/Intelligent Materials and Nanotechnology (Smartmat-'08) & selcted peer reviewed papers from the 2nd International Workshop on Functional Materials and Nanomaterials (IWOFM-2)
Author(s)
Bibliographic Information
Smart materials : selected peer reviewed papers from the International Conference on Smart Materials, Smart/Intelligent Materials and Nanotechnology (Smartmat-'08) & selcted peer reviewed papers from the 2nd International Workshop on Functional Materials and Nanomaterials (IWOFM-2)
（Advanced materials research, 55-57）
Trans Tech, c2008
Available at 1 libraries
Note
Includes bibliographical references and index
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The main theme of this special volume is that of intelligent and smart materials and their application. One particular aim is to encourage the 'cross-fertilisation' of these materials with nanomaterials.
Table of Contents
Preface
Committees
Piezoelectric Actuators 2008: Key Factors for Commercialization
Tailored Intelligent Materials
Origin of P-E Hysteresis Offsets in Compositionally Graded Ba(1-x)SrxTiO3 Thick Films
Nanosized Titania, a Smart Material or is it just Clever?
Magnetic Nanoparticles as Smart Heating Mediator for Hyperthermia and Sorbent Regeneration
Defining Structure in Electrospun Polymer Fibres
I. Piezoelectric Ceramic/Polymers
Sonocatalyzed Ammonothermal Preparation of Fine Lithium Niobate Powders
Effectively Doping of Rare Earth Additives in Sol Gel Derived PZT Ceramics
Micro- and Macroscopic Observations of the Microtexture, the Dielectric and Piezoelectric Properties in Bulk and Multilayer Pb (Zr, Ti)O3
Effect of Annealing on the Structure and Dielectric Properties in PZT-PCoN Ceramics
Phase Evolution and Physical Properties of (1-x)BZT-xBFN Ceramic System
Relationships between Processing Parameters and Properties of PZT Ceramics
Synthesis of Conducting Polymer Films by Plasma Polymerization Process
Chemical Synthesis and Characterization of ZnTiO3 Powder Prepared by the Coprecipitation Oxalate Method
Dielectric and Piezoelectric Properties of B2O3 and SnO2 Doped Barium Titanate Ceramics
Ferroelectricity of (1-x)(Bi0.5Na0.5)TiO3 - xBa(Ti0.95Zr0.05)O3 Solid Solution Ceramics
Effect of Calcination Temperature on Phase and Morphology of Sol-Gel Derived PZTN Powders
BaMnTiO3 Synthesized by the Oxalate and Impregnation Methods
Ammonothermal Preparation of Barium Zirconate Fine Powders
Effect of Al2O3 Addition on Dielectric, Piezoelectric and Ferroelectric Properties of 0.2Pb(Zn1/3Nb2/3)O3-0.8Pb(Zr1/2Ti1/2)O3 Ceramics
Microstuctural Study and Properties of 0.8PZT-0.2BT Ceramics Using a Two-Stage Sintering Procedure
Effects of Manganese Addition on Phase Formation, Microstructure and Electrical Properties of Barium Titanate Ceramics
Induced Internal Bubble Shapes Affected Piezoelectric Behaviors of PVDF Films
Dielectric Properties Enhancement in Polybenzoxazine Composite at Multi-Frequency Range
Effect of Thermal Treatment on Dielectric Properties of 0.8Pb(Zr1/2Ti1/2)O3 - 0.2Pb(Co1/3Nb2/3)O3 Ceramics
Influence of Fabrication Processing on Perovskite Phase Formation of KNN-BZT
Effect of Lead Nickel Niobate Substitution on Phase Transitions of Lead Zirconate Ceramics Prepared by the Solid State Reaction Method
Synthesis, Crystal Structures, Phase Transition Characterization and Thermal Properties of the (1-x)PbZrO3-xPb(Co1/3Nb2/3)O3 Solid Solution System
Effects of Zr/Ti Ratio on the Structure and Ferroelectric Properties in PZT-PZN-PMN Ceramics near the Morphotropic Phase Boundary
Impedance and Dielectric Properties of Nb-Doped Pb(Zr0.52Ti0.48)O3 Ceramics
Dielectric and Piezoelectric Properties of Zirconium-Doped Bismuth Sodium Titanate Ceramics
Structural and Morphologies of (1-x)BaTiO3-xBaFe0.5Nb0.5O3 Solid Solution
Fabrication of 0-3 Non-Lead Based Piezoceramic/Polymer Composites Using Suction Technique
Microstructures of Zirconium Titanate Powders and Ceramics Prepared by Solid-State Mixed Oxide Method
Preparation and Properties of B2O3-Doped Ba(Zr0.07Ti0.93)O3 Ceramics
Characterization of LiNbO3 Powder Prepared by Citrate Gel Method
X-Ray Absorption Spectroscopy Study of Ba1-xSrxTiO3 (x = 0.0-0.2) at the Ti-K and Ba-LIII Edges
Synthesis of Na0.5Bi0.5TiO3 Submicron Particles in Molten Salt
Effects of Starting Materials on Molten Salt Synthesis of Bi4Ti3O12
Effect of ZrO2 Doping on Crystal Structure, Microstructure and Phase Transition of Lead Titanate Ceramics
Fabrication of Barium Stannate Tatanate Ceramics via Combustion Technique
The Effect of Excess PbO on Crystal Structure and Microstructure of (Pb0.925Ba0.075)TiO3 Ceramics
The Preparation of Barium Stannate Titanate Ceramics via Solid State Reaction Method
Preparation of Barium Strontium Titanate Ceramics via Combustion Method
Effect of MnO2 Impurity on the PZT-PMN System Ceramics for Piezoelectric Transformer
Effect of Excess PbO on Crystal Structure, Microstructure and Phase Transition of Lead Titanate Ceramics
Effects of Calcination Temperatures on Phase and Morphology Evolution of (Ba0.25Sr0.75)(Zr0.75Ti0.25)O3 Powders Synthesized via Solid-State Reaction and Combustion Technique
Phase Formation and Microstructure of PBZT Powders Prepared via Mixed Oxide Method
Effect of Calcination Temperatures on Microstructure and Phase Formation of Ba(Zr0.25Ti0.75)O3 Powders
Fabrication of Lead Barium Titanate Ceramics via Conventional Solid-State Mixed Oxide Technique
Fabrication of Barium Zirconium Titanate Ceramics Using Ultrasonic Ball Milling Technique
Ferroelectric and Mechanical Properties of PZT-PZN-PNN Ceramics
Antiferroelectric Lead Zirconate Ceramics with Nanoparticle Alumina Additions
Morphotropic Phase Boundary of Lead-Free Piezoelectric Ceramics from BNT- KN System
Formation of NaNbO3 Crystals in Dielectric Glass and Glass-Ceramics of a Na2O-Nb2O5-Al2O3-SiO2 System
Ferroelectric and Dielectric Aging Effects of Fe3+/Nb5+ Hybrid-Doped Barium Titanate Ceramics
II. Magnetostrictive Materials
Effect of Calcination Conditions on Phase Formation and Characterization of BiFeO3 Powders Synthesized by a Solid-State Reaction
Effect of Calcination Conditions on Phase Formation and Characterization of BiFeO3-BaTiO3 Powders Synthesized by a Solid-State Reaction
III. Shape Memory Alloys
Assessment of Mechanical Properties and Transformation Behavior of Locally-Made Ni-Ti Alloys Used in Orthodontics
Effect of Direct Electric Resistance Heat Treatment on Mechanical Properties of NiTi Orthodontic Arch Wires
IV. Actuator and Sensor Materials
Materials of Nanocrystalline Sr1-xBaxBi4Ti4O15 for Piezoelectric Sensor
Electrical Conductivity of Poly(3,4-Ethylenedioxythiophene)-Poly(Styrenesulfonate) Coatings on Polyacrylonitrile Nanofibers for Sensor Applications
SiO2-Multiwalled Carbon Nanotube Base Gas Sensor
Application of the PEGDE Modified Silk Fibroin Membrane to an Amperometric Glucose Biosensor
Enhanced the Performance of Fluorescence Gas Sensor of Porphyrin Dye by Using TiO2 Nanoparticles
Determination of Mn Site in BaTiO3 by X-Ray Absorption Spectroscopy
Changes in Ferroelectric Properties of 0.7PMN-0.3PT Ceramic with Compressive Stress
Scaling Behavior of Dynamic Hysteresis in Hard PZT Bulk Ceramics under Influence of Compressive Stress
Gas-Sensing Property Evaluation of Reactively Sputtered Chromium Oxide Thin Films
Effect of Platinum Impregnation on ZnO Tetrapods for Ethanol Sensor
Ethanol Sensing Characteristics of ZnO Nanostructures Impregnated by Gold Colloid
Structural and Optical Study of Nano-Structured CdS-CBD Thin Films on CdTe Substrates Grown by Various Temperatures Deposited
Spectroscopys Studies of Iron Phthalocyanine Thin Films
Feature Difference of Interaction between Various Organic Solvent Vapors and Metal Phthalocyanines Coated on Quartz Crystal
V. Smart Structural Materials and Composites
Stability of Liquid Al Foams by Oxidised Al Powders
Transparent Glass Ceramics from 65LiNbO3-35SiO2 Glass Composition
Surfactant-Templated Synthesis of Modified Porous Clay Heterostructure (PCH)
Evaluation the Manufacturing Process of Silk/Gelatin Electrospun Membrane
Influence of ZnO Content on Film Morphology and Device Performance of MEH-PPV/ZnO Hybrid Solar Cells
Water Absorption and Phase Transition of Calcium Carbonate in the Sea Water Mussel (Anadara Granosa)
Temperature Effect on Chicken Egg Shell Investigated by XRD, TGA and FTIR
Structural and Optical Properties of Zn0.8Co0.2O Ceramics
The Effect of Organic Modificaition Method onto Montmorillonite on Mechanical Properties of Natural Rubber
Thermal Stabilization of PVC Using Organic Modified Montmorillonite
Thermal Conductivity of Ceramic Fibres at High-Temperatures
Effect of WC Addition on Phase Formation and Microstructure of TiC-Ni Composites
Effect of Reaction between Fe and Carbide Particles on Mechanical Properties of Fe-Base Composite
Copper Powder Extrusion: A Smart Processing for Energy and Environment Conservation
Toughening of PZT Ceramics by In Situ Complex Structures
Fabrication and Characterization of Sol-Gel Derived PZT/WO3 Ceramics
Influence of Annealing Temperature on the Properties of Nanostructure ITO Thin Films Prepared by Ion-Assisted Electron Beam Evaporation
Effect of Carbon Addition on Dielectric Properties of 0-3 PZT-Portland Cement Composite
Effect of Polarization on the Microstructure and Piezoelectric Properties of PZT-Cement Composites
Magnetic Hysteresis Properties in Dilute Ising Ultra-Thin-Film: Monte Carlo Investigation
Mechanical Properties and Microstructure of Aramid/Al2O3/Epoxy Resin Laminated Composites
Manufacturing Process and Property Analysis of Sound Absorption Sandwich Board
Novel Manufacturing Process for Tencel/Chitosan/Pectin Composite Dressing
Thermoplastic Polyurethane (TPU) Honeycomb Air Cushion Combined with Polylactic Acid (PLA) Nonwoven Fabric for Impact Protection
The Effects of Thermal Consolidation Methods on PET Nonwoven Composites for Thermal Insulation Use
Manufacturing Processing of Polylactic Acid Braids as Artificial Bone Matrix
Manufacturing Process and Property Evaluation of Functional Composite Yarn-Dyed Woven Fabrics Made from Bamboo Charcoal/Stainless Steel and TPU
Manufacturing and Stab-Resisting Properties of Compound Fabric Reinforced Using Recycled Nonwoven Selvages
Manufacturing Process and Practical Examination for a 3D Structural Geocell Made from Recycled PET Fibers
Manufacture and Performance Evaluation of Elastic/Bamboo Wrapped Yarn
Evaluation of Manufacturing Technology and Characterization of Composite Fabric for Stab Resistant Materials
PET/PP Blend with Bamboo Charcoal to Produce Functional Composites: Evaluation of Functionalities
The Effect of Processing Parameters on Properties of Bi2GeO5 Glass Ceramics
Photo-Induced Superhydrophilic TiO2 Films Deposited by DC Reactive Magnetron Sputtering at Room Temperature
Temperature Dependence of Optical Constants of Silver Film Studied by In Situ Spectroscopic Ellipsometry
Investigation of Aluminium Diffusion into an Amorphous Silicon Thin Film at High Temperature by In Situ Spectroscopic Ellipsometry
Self-Cleaning Properties of TiO2 Films Deposited by Reactive Magnetron Sputtering Using Smooth D.C. and Pulsed D.C. Source
Fabrication of Double Layers of Aramid Fiber/Alumina/Epoxy Resin Laminate Composite Using Low-Pressure Technique
Fabrication of Ferroelectric Bismuth Titanate Glass-Ceramic by Incorporation Method
The Influence of Total and Oxygen Partial Pressures on Structure and Hydrophilic Property of TiO2 Thin Films Deposited by Reactive DC Magnetron Sputtering
Characterization of Anatase and Rutile TiO2 Thin Films Deposited by Two Cathodes Sputtering System
Ferroelectric Glass-Ceramics from the PbO-Bi2O3-GeO2 System
Composites Base on Geopolymer Matrices: Preliminary Fabrication, Mechanical Properties and Future Applications
VI. Electro-Optics
High Capacity Packet Switching with a Soliton Pulse in a Nonlinear Micro Ring Resonator
Attosecond Pulse and Beyond Generation Based on Multi-Stage Micro Ring Resonators
Entangled Photon Generation in a Nonlinear Micro Ring Resonator for Quantum Key Distribution Use
Temperature Dependent Photoluminescence of ZnSe/Alq3 Hybrid Heterostructure
Light Scattering in Poly(Methyl Methacrylate) Hybrid Sheet Filled by Titanium Dioxide Nanocrystals Prepared by High Electric Field Assisted Spray Pyrolysis Process
Improvement of UV Protection Properties in Poly(Methyl Methacrylate) Sheet Coated by Titanium Dioxide/ Poly(Methyl Methacrylate) Hybrid Film
Packet Switching Start-Stop Bits Generation Based on Bifurcation Behavior of Light in a Micro Ring Resonator
Construction and Evaluation of the Fiber-Optic Sensor System for Chemical Vapor Detection
Fluoride and Antimony-Doped Tin Oxide Film by Spray Pyrolysis
VII. MEMS
Improving Sensitivity of p-n Junction Temperature Sensor by Carrier Lifetime Modification
Novel Design of a Micro Gyroscope Based Birefringence Measurement for Sensor Applications
VIII. Carbon and Others
Finite Element Modeling of van der Waals Interaction for Elastic Stability of Multi-Walled Carbon Nanotubes
Improvement of Mesopore Structure of Resorcinol and Formaldehyde Carbon Cryogels by Acid Solution
Optimization of Chemical Vapor Deposition Synthesis Conditions for Multiwall Carbon Nanotube by Statistical Analysis of Experiment
Mechanochemical Treated Multi-Walled Carbon Nanotubes for Incorporation of Metal Ions
Synthesis of Coil-Like Shape CNTs by Thermal CVD Method
Attachment of Metal Oxide Nanoparticles on Carbon Nanotubes with Different Oxidation Levels
Microstructure and Characterizations of Portland-Carbon Nanotubes Pastes
Mechanical Properties of Hemp Fiber Composites with Carbon Nanotubes Reinforcement
The Diamond Crystal Nucleation by Combustion Activation CVD
Growth Conditions for Carbon Nanotubes and Helical Nanofibers on Copper Substrates Using Sparked Catalysts
Electronic Structure of Straight and T-Shape Singled-Wall Carbon Nanotube Junctions: A Molecular Quantum Mechanics Study
IX. New Nano
Structural Evolution in the Processing of Fe/ BaFe12O19 Nano Composite via Mechanical Alloying
Oxygen Control on Nanocrystal-AlON Films by Reactive Gas-Timing Technique R.F. Magnetron Sputtering and Annealing Effect
Photocatalytic Decolorization of Red Dye in Aqueous ZnO-TiO2 Suspensions
Electrode Properties of Nanostructured and Amorphous Mg1.75Nb0.25Ni Compound Produced by Mechanical Alloying
Direct Synthesis of Anisotropic Metal Particles by Ink Jet Printing Technique
Chitosan Clad Manganese Doped Zing Sulphide Nanocrystallites for Biolabeling
The Effects of Substrate Temperature on Optical Properties and Surface Morphology of Nickel Phthalocyanine Thin Films Grown by Organic Evaporator System
Electrical Characterization of Diamond-Like Carbon Films Synthesized by Plasma Enhanced CVD Technique
Effects of Gold Nanoparticles on the Fabrication of Red Colored High Refractive Index Lead Glass
Fabrication of Zirconia Nanofibers Using Zirconatrane Synthesized by Oxide One-Pot Process as Precursor
Mechanical Property Evaluation of ZnO Thin Films Using Nanoindentation and Scanning Probe Microscope
Influences of Zr4+ and Polyacrylamide on Structural and Optical Properties of ZnO Nanoparticles Prepared via Microwave Irradiation
Functionalized Porous Clay Heterostructure for Heavy Metal Adsorption from Wastewater
Niobium and Antimony-Modified Titanium Dioxide/Epoxy Thin Film for Proton Exchange Membrane Fuel Cell
Improvement of Hydrophobic Properties of the Electrospun PVA Fabrics by SF6 Plasma Treatment
Microstructure and Characterizations of Portland-Bottom Ash-Silica Fume Cement Pastes
Investigation of Nanomaterials Prepared by Thermal Evaporation of Carbon-ZnO Mixtures
Synthesis and Characterization of Nanostructured Materials Prepared from SiO2 and GeO2 Mixture by Carbon Assisted Method
Zn2TiO4 Nanostructures Prepared by Thermal Oxidation Method
CuO Nanostructure by Oxidization of Copper Thin Films
Synthesis of SiO2 Nanopowder from Rice Husk Ash
Preparation of Nano-Crystalline Boehmite as a Gamma-Alumina Source for the Production of Na.beta-Al2O3 Solid Electrolyte
Synthesis and Characterization of Zinc Oxide Nanocrystals by Solid-State and Solvothermal Techniques
Fabrication of Gold Nanocubes by the Electrochemical Method
Synthesis of Gold Nanodogbones by the Seed Mediated Growth Method with Addition of Vitamin C Solvent
X. Molecular Actuator and Sensor Materials
Chiral Helices in a 3D Network of Zn2(en)V2O7 (en = Ethylenediamine)
Time-of-Flight Measurement of Poly(3-Hexylthiophene) Thin Films
Optical Properties of Metal Free and Metal Phthalocyanine by Molecular Band Calculation
XI. Biomedical/Bioresponsive
Design and Preparation of a Bioresponsive Hydrogel for Biomedical Application as a Wound Dressing
Modification of Thai Silk Fibroin Scaffolds by Gelatin Conjugation for Tissue Engineering
Substitution of Iron in Preparation of Enhanced Thermal Property and Bioactivity of Hydroxyapatite
Processing, Mechanical Property Development and In Vitro Hydrolytic Degradation Studies of a Poly(L-Lactide-co- -Caprolactone) Monofilament Fibre for Potential Use as an Absorbable Surgical Suture
Differential Expression of Osteogenic Differentiation in Human Umbilical Cord Wharton's Jelly-Derived Mesenchymal Stem Cells Treated with Demineralized Bone
Development of a Protein-Filled Conduit for Peripheral Nerve Regeneration
Electrical Properties and Microstructures of P2O5-CaO-Na2O Glasses
Ultrastructural Characterization of Liposomes Using Transmission Electron Microscope
Cholesteryl Cetyl Carbonate as a Smart Material for Drug Delivery Application
Preparation and Drug Release Studies of Chitosan/Methoxy Poly(Ethylene Glycol)-b-Poly(D,L-Lactide-co-Glycolide) Nanocomposite Films for Use as Controlled Release Drug Delivery
Study on Morphology and Thermal Stability of Nanoporous Silk Fibroin Films
Preparation and Characterization of Poly(D,L-Lactide) and Silk Fibroin Nanocomposite Microparticles for Potential Use in Tissue Engineering
Zwitterionic and Charge-Balanced Polyampholyte Copolymer Hydrogels
XII. Speciality Polymer with Controlled Microstructures
Morphology of Electrospun Mats of Soy Protein Isolate and its Blend
Novel Three-Component Blends Based on Poly(L-Lactide)
Chemical Resistant Improvement of Natural Rubber and Nitrile Gloves by Coating with Hydrophobic Film
Effect of Nano-Porous Alumina Filler on Thermal and Electrical Transport Properties of Solid Polymer Electrolyte (PEO)12LiBF4
Characterization and Thermal Properties of Sol-Gel Processed PMMA/SiO2 Hybrid Materials
Surface Treatment of Polystyrene Films with Inductively Coupled Plasma System
Ring-Opening Polymerization of -Caprolactone Using Novel Tin(II) Alkoxide Initiators
XIII. Others Smart Materials
Investigation of the Strain Hardening and Bauschinger Effect of Low and High Strength Steel Application in Drawbead-Tester by Experiment and Numerical Simulation
Extraction of Defect in Doping Silicon Wafer by Analyzing the Lifetime Profile Method
Preparation and Properties Indium Tin-Oxide Thin Films by RF Sputtered for Photodetectors
High Resolution X-Ray Diffraction and Raman Scattering Studies of Cubic-Phase InN Films Grown by MBE
Effect of Palladium on Photocatalytic Activity of SnO2 Nanoparticles
Computational Study on Thermodynamic and Structural Properties of ZSM-5 Doped by Al/Fe and Al/P
Synthesis and Characterization of PLA-Based Aliphatic-Aromatic Copolyesters: Effect of Diols
Synthesis and Characterization of Degradable Poly(Ethylene Terephthalate-co-Lactic Acid) and its Blends
Sintering Behavior of the "-Alumina Solid Electrolyte for Battery Applications
Improved Electrical Conducting Wires for SOFCs
Defect-Induced Properties of Doped Alpha Alumina Samples
Preparation of IR Reflective Green Pigment
Thermoelectric Properties of BixSbyTezSew Nanocomposite Materials
Simple Thermoelectric Module
Behaviour of Various Glass Seal for Planar Solid Oxide Fuel Cell
InGaPN/GaP Lattice-Matched Single Quantum Wells on GaP (001) Grown by MOVPE
Effect of Substrate-Surface Orientation on the N Incorporation in GaAsN Films on GaAs Grown by MOVPE
Synthesis and Thermoelectric Properties of CoSb3-yTey
Sulphate-Based Flame-Retardant for Handmade Mulberry Paper
Lead-Free Ferroelectric Material: Dysprosium Doped Bi4Ti3O12
Sinterbility of (Bi4-xLax)Ti3O12 Ceramics
Hydrothermal Synthesis of Zinc Oxide (ZnO) Microparticle
ESR and Optical Absorption Spectra of Copper (II) Ions in Glasses
Enhancement of the Photocatalytic Performance of Ru-Doped TiO2 Nanoparticles
Magnetic Properties of Mn Doped NiO
Biosurfactant Production from Palm Oil Using Sequencing Batch Reactors: Effect of Cycle Time
Cost Effective Natural Adsorbent for Fluoride Removal
Effect of Bi2O3 Content on the Properties of Bi2O3-BaO-B2O3 Glass System
Synthesis, Phase Formation and Characterization of Co4Nb2O9 Powders Synthesized by Solid-State Reaction
A Study of the Effects of Processing Conditions on Mechanical Properties of Polypropylene/Multiwall Carbon Nanotube Nanocomposites Using Design of Experiments
Influence of Substrate Temperature on Some Properties of Close-Spacing Thermally Evaporated CdTe Thin Films
Effects of Potassium Fluoride Salt Additive on the Sintering Temperature and Dielectric Properties of BaFe0.5Nb0.5O3 Ceramics
Effect of ZrO2 Doping in Physical Properties of Barium Iron Niobate Ceramics
Production and Characterization of Polyhydroxyalkanoates (PHAs) from Inexpensive Substrates by Alcaligenes Latus
Controlled-Release Material for Urea Fertilizer from Polylactic Acid
Application of Artificial Neural Network to Calculate Curie Temperature of Ferromagnetic Materials
Controlled-Release Materials for Fertilizer Based on Lactic Acid Polymers
Fragrant Finishing of Cotton Fabric Using -Cyclodextrin
Use of Hydroxypropylmethylcellulose as Thermo-Responsive Flocculant in Skim Natural Rubber Latex
Microstructure and Interfaces of Thin Film Capacitors on Base Metal Foils
Influence of Structural and Electrical Properties of ITO Films on Electrochromic Properties of WO3 Films
Effect of DC Power on Structural and Hydrophilic Activity of TiO2 Films
Oily Soil Detergency under Microemulsion Conditions: Effects of Oil Loading and Surfactant Adsorption
Ferroelectric Properties of Sn-Doped PZT-PNN Ceramics
by "Nielsen BookData"