Smart materials : selected peer reviewed papers from the International Conference on Smart Materials, Smart/Intelligent Materials and Nanotechnology (Smartmat-'08) & selcted peer reviewed papers from the 2nd International Workshop on Functional Materials and Nanomaterials (IWOFM-2)

著者

• International Conference on Smart Materials, Smart/Intelligent Materials and Nanotechnology
• Tunkasiri, Tawee
• International Workshop on Functional Materials and Nanomaterials (2nd : 2008)

書誌事項

Smart materials : selected peer reviewed papers from the International Conference on Smart Materials, Smart/Intelligent Materials and Nanotechnology (Smartmat-'08) & selcted peer reviewed papers from the 2nd International Workshop on Functional Materials and Nanomaterials (IWOFM-2)

edited by Tawee Tunkasiri

（Advanced materials research, 55-57）

Trans Tech, c2008

注記

Includes bibliographical references and index

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The main theme of this special volume is that of intelligent and smart materials and their application. One particular aim is to encourage the 'cross-fertilisation' of these materials with nanomaterials.

目次

Preface Committees Piezoelectric Actuators 2008: Key Factors for Commercialization Tailored Intelligent Materials Origin of P-E Hysteresis Offsets in Compositionally Graded Ba(1-x)SrxTiO3 Thick Films Nanosized Titania, a Smart Material or is it just Clever? Magnetic Nanoparticles as Smart Heating Mediator for Hyperthermia and Sorbent Regeneration Defining Structure in Electrospun Polymer Fibres I. Piezoelectric Ceramic/Polymers Sonocatalyzed Ammonothermal Preparation of Fine Lithium Niobate Powders Effectively Doping of Rare Earth Additives in Sol Gel Derived PZT Ceramics Micro- and Macroscopic Observations of the Microtexture, the Dielectric and Piezoelectric Properties in Bulk and Multilayer Pb (Zr, Ti)O3 Effect of Annealing on the Structure and Dielectric Properties in PZT-PCoN Ceramics Phase Evolution and Physical Properties of (1-x)BZT-xBFN Ceramic System Relationships between Processing Parameters and Properties of PZT Ceramics Synthesis of Conducting Polymer Films by Plasma Polymerization Process Chemical Synthesis and Characterization of ZnTiO3 Powder Prepared by the Coprecipitation Oxalate Method Dielectric and Piezoelectric Properties of B2O3 and SnO2 Doped Barium Titanate Ceramics Ferroelectricity of (1-x)(Bi0.5Na0.5)TiO3 - xBa(Ti0.95Zr0.05)O3 Solid Solution Ceramics Effect of Calcination Temperature on Phase and Morphology of Sol-Gel Derived PZTN Powders BaMnTiO3 Synthesized by the Oxalate and Impregnation Methods Ammonothermal Preparation of Barium Zirconate Fine Powders Effect of Al2O3 Addition on Dielectric, Piezoelectric and Ferroelectric Properties of 0.2Pb(Zn1/3Nb2/3)O3-0.8Pb(Zr1/2Ti1/2)O3 Ceramics Microstuctural Study and Properties of 0.8PZT-0.2BT Ceramics Using a Two-Stage Sintering Procedure Effects of Manganese Addition on Phase Formation, Microstructure and Electrical Properties of Barium Titanate Ceramics Induced Internal Bubble Shapes Affected Piezoelectric Behaviors of PVDF Films Dielectric Properties Enhancement in Polybenzoxazine Composite at Multi-Frequency Range Effect of Thermal Treatment on Dielectric Properties of 0.8Pb(Zr1/2Ti1/2)O3 - 0.2Pb(Co1/3Nb2/3)O3 Ceramics Influence of Fabrication Processing on Perovskite Phase Formation of KNN-BZT Effect of Lead Nickel Niobate Substitution on Phase Transitions of Lead Zirconate Ceramics Prepared by the Solid State Reaction Method Synthesis, Crystal Structures, Phase Transition Characterization and Thermal Properties of the (1-x)PbZrO3-xPb(Co1/3Nb2/3)O3 Solid Solution System Effects of Zr/Ti Ratio on the Structure and Ferroelectric Properties in PZT-PZN-PMN Ceramics near the Morphotropic Phase Boundary Impedance and Dielectric Properties of Nb-Doped Pb(Zr0.52Ti0.48)O3 Ceramics Dielectric and Piezoelectric Properties of Zirconium-Doped Bismuth Sodium Titanate Ceramics Structural and Morphologies of (1-x)BaTiO3-xBaFe0.5Nb0.5O3 Solid Solution Fabrication of 0-3 Non-Lead Based Piezoceramic/Polymer Composites Using Suction Technique Microstructures of Zirconium Titanate Powders and Ceramics Prepared by Solid-State Mixed Oxide Method Preparation and Properties of B2O3-Doped Ba(Zr0.07Ti0.93)O3 Ceramics Characterization of LiNbO3 Powder Prepared by Citrate Gel Method X-Ray Absorption Spectroscopy Study of Ba1-xSrxTiO3 (x = 0.0-0.2) at the Ti-K and Ba-LIII Edges Synthesis of Na0.5Bi0.5TiO3 Submicron Particles in Molten Salt Effects of Starting Materials on Molten Salt Synthesis of Bi4Ti3O12 Effect of ZrO2 Doping on Crystal Structure, Microstructure and Phase Transition of Lead Titanate Ceramics Fabrication of Barium Stannate Tatanate Ceramics via Combustion Technique The Effect of Excess PbO on Crystal Structure and Microstructure of (Pb0.925Ba0.075)TiO3 Ceramics The Preparation of Barium Stannate Titanate Ceramics via Solid State Reaction Method Preparation of Barium Strontium Titanate Ceramics via Combustion Method Effect of MnO2 Impurity on the PZT-PMN System Ceramics for Piezoelectric Transformer Effect of Excess PbO on Crystal Structure, Microstructure and Phase Transition of Lead Titanate Ceramics Effects of Calcination Temperatures on Phase and Morphology Evolution of (Ba0.25Sr0.75)(Zr0.75Ti0.25)O3 Powders Synthesized via Solid-State Reaction and Combustion Technique Phase Formation and Microstructure of PBZT Powders Prepared via Mixed Oxide Method Effect of Calcination Temperatures on Microstructure and Phase Formation of Ba(Zr0.25Ti0.75)O3 Powders Fabrication of Lead Barium Titanate Ceramics via Conventional Solid-State Mixed Oxide Technique Fabrication of Barium Zirconium Titanate Ceramics Using Ultrasonic Ball Milling Technique Ferroelectric and Mechanical Properties of PZT-PZN-PNN Ceramics Antiferroelectric Lead Zirconate Ceramics with Nanoparticle Alumina Additions Morphotropic Phase Boundary of Lead-Free Piezoelectric Ceramics from BNT- KN System Formation of NaNbO3 Crystals in Dielectric Glass and Glass-Ceramics of a Na2O-Nb2O5-Al2O3-SiO2 System Ferroelectric and Dielectric Aging Effects of Fe3+/Nb5+ Hybrid-Doped Barium Titanate Ceramics II. Magnetostrictive Materials Effect of Calcination Conditions on Phase Formation and Characterization of BiFeO3 Powders Synthesized by a Solid-State Reaction Effect of Calcination Conditions on Phase Formation and Characterization of BiFeO3-BaTiO3 Powders Synthesized by a Solid-State Reaction III. Shape Memory Alloys Assessment of Mechanical Properties and Transformation Behavior of Locally-Made Ni-Ti Alloys Used in Orthodontics Effect of Direct Electric Resistance Heat Treatment on Mechanical Properties of NiTi Orthodontic Arch Wires IV. Actuator and Sensor Materials Materials of Nanocrystalline Sr1-xBaxBi4Ti4O15 for Piezoelectric Sensor Electrical Conductivity of Poly(3,4-Ethylenedioxythiophene)-Poly(Styrenesulfonate) Coatings on Polyacrylonitrile Nanofibers for Sensor Applications SiO2-Multiwalled Carbon Nanotube Base Gas Sensor Application of the PEGDE Modified Silk Fibroin Membrane to an Amperometric Glucose Biosensor Enhanced the Performance of Fluorescence Gas Sensor of Porphyrin Dye by Using TiO2 Nanoparticles Determination of Mn Site in BaTiO3 by X-Ray Absorption Spectroscopy Changes in Ferroelectric Properties of 0.7PMN-0.3PT Ceramic with Compressive Stress Scaling Behavior of Dynamic Hysteresis in Hard PZT Bulk Ceramics under Influence of Compressive Stress Gas-Sensing Property Evaluation of Reactively Sputtered Chromium Oxide Thin Films Effect of Platinum Impregnation on ZnO Tetrapods for Ethanol Sensor Ethanol Sensing Characteristics of ZnO Nanostructures Impregnated by Gold Colloid Structural and Optical Study of Nano-Structured CdS-CBD Thin Films on CdTe Substrates Grown by Various Temperatures Deposited Spectroscopys Studies of Iron Phthalocyanine Thin Films Feature Difference of Interaction between Various Organic Solvent Vapors and Metal Phthalocyanines Coated on Quartz Crystal V. Smart Structural Materials and Composites Stability of Liquid Al Foams by Oxidised Al Powders Transparent Glass Ceramics from 65LiNbO3-35SiO2 Glass Composition Surfactant-Templated Synthesis of Modified Porous Clay Heterostructure (PCH) Evaluation the Manufacturing Process of Silk/Gelatin Electrospun Membrane Influence of ZnO Content on Film Morphology and Device Performance of MEH-PPV/ZnO Hybrid Solar Cells Water Absorption and Phase Transition of Calcium Carbonate in the Sea Water Mussel (Anadara Granosa) Temperature Effect on Chicken Egg Shell Investigated by XRD, TGA and FTIR Structural and Optical Properties of Zn0.8Co0.2O Ceramics The Effect of Organic Modificaition Method onto Montmorillonite on Mechanical Properties of Natural Rubber Thermal Stabilization of PVC Using Organic Modified Montmorillonite Thermal Conductivity of Ceramic Fibres at High-Temperatures Effect of WC Addition on Phase Formation and Microstructure of TiC-Ni Composites Effect of Reaction between Fe and Carbide Particles on Mechanical Properties of Fe-Base Composite Copper Powder Extrusion: A Smart Processing for Energy and Environment Conservation Toughening of PZT Ceramics by In Situ Complex Structures Fabrication and Characterization of Sol-Gel Derived PZT/WO3 Ceramics Influence of Annealing Temperature on the Properties of Nanostructure ITO Thin Films Prepared by Ion-Assisted Electron Beam Evaporation Effect of Carbon Addition on Dielectric Properties of 0-3 PZT-Portland Cement Composite Effect of Polarization on the Microstructure and Piezoelectric Properties of PZT-Cement Composites Magnetic Hysteresis Properties in Dilute Ising Ultra-Thin-Film: Monte Carlo Investigation Mechanical Properties and Microstructure of Aramid/Al2O3/Epoxy Resin Laminated Composites Manufacturing Process and Property Analysis of Sound Absorption Sandwich Board Novel Manufacturing Process for Tencel/Chitosan/Pectin Composite Dressing Thermoplastic Polyurethane (TPU) Honeycomb Air Cushion Combined with Polylactic Acid (PLA) Nonwoven Fabric for Impact Protection The Effects of Thermal Consolidation Methods on PET Nonwoven Composites for Thermal Insulation Use Manufacturing Processing of Polylactic Acid Braids as Artificial Bone Matrix Manufacturing Process and Property Evaluation of Functional Composite Yarn-Dyed Woven Fabrics Made from Bamboo Charcoal/Stainless Steel and TPU Manufacturing and Stab-Resisting Properties of Compound Fabric Reinforced Using Recycled Nonwoven Selvages Manufacturing Process and Practical Examination for a 3D Structural Geocell Made from Recycled PET Fibers Manufacture and Performance Evaluation of Elastic/Bamboo Wrapped Yarn Evaluation of Manufacturing Technology and Characterization of Composite Fabric for Stab Resistant Materials PET/PP Blend with Bamboo Charcoal to Produce Functional Composites: Evaluation of Functionalities The Effect of Processing Parameters on Properties of Bi2GeO5 Glass Ceramics Photo-Induced Superhydrophilic TiO2 Films Deposited by DC Reactive Magnetron Sputtering at Room Temperature Temperature Dependence of Optical Constants of Silver Film Studied by In Situ Spectroscopic Ellipsometry Investigation of Aluminium Diffusion into an Amorphous Silicon Thin Film at High Temperature by In Situ Spectroscopic Ellipsometry Self-Cleaning Properties of TiO2 Films Deposited by Reactive Magnetron Sputtering Using Smooth D.C. and Pulsed D.C. Source Fabrication of Double Layers of Aramid Fiber/Alumina/Epoxy Resin Laminate Composite Using Low-Pressure Technique Fabrication of Ferroelectric Bismuth Titanate Glass-Ceramic by Incorporation Method The Influence of Total and Oxygen Partial Pressures on Structure and Hydrophilic Property of TiO2 Thin Films Deposited by Reactive DC Magnetron Sputtering Characterization of Anatase and Rutile TiO2 Thin Films Deposited by Two Cathodes Sputtering System Ferroelectric Glass-Ceramics from the PbO-Bi2O3-GeO2 System Composites Base on Geopolymer Matrices: Preliminary Fabrication, Mechanical Properties and Future Applications VI. Electro-Optics High Capacity Packet Switching with a Soliton Pulse in a Nonlinear Micro Ring Resonator Attosecond Pulse and Beyond Generation Based on Multi-Stage Micro Ring Resonators Entangled Photon Generation in a Nonlinear Micro Ring Resonator for Quantum Key Distribution Use Temperature Dependent Photoluminescence of ZnSe/Alq3 Hybrid Heterostructure Light Scattering in Poly(Methyl Methacrylate) Hybrid Sheet Filled by Titanium Dioxide Nanocrystals Prepared by High Electric Field Assisted Spray Pyrolysis Process Improvement of UV Protection Properties in Poly(Methyl Methacrylate) Sheet Coated by Titanium Dioxide/ Poly(Methyl Methacrylate) Hybrid Film Packet Switching Start-Stop Bits Generation Based on Bifurcation Behavior of Light in a Micro Ring Resonator Construction and Evaluation of the Fiber-Optic Sensor System for Chemical Vapor Detection Fluoride and Antimony-Doped Tin Oxide Film by Spray Pyrolysis VII. MEMS Improving Sensitivity of p-n Junction Temperature Sensor by Carrier Lifetime Modification Novel Design of a Micro Gyroscope Based Birefringence Measurement for Sensor Applications VIII. Carbon and Others Finite Element Modeling of van der Waals Interaction for Elastic Stability of Multi-Walled Carbon Nanotubes Improvement of Mesopore Structure of Resorcinol and Formaldehyde Carbon Cryogels by Acid Solution Optimization of Chemical Vapor Deposition Synthesis Conditions for Multiwall Carbon Nanotube by Statistical Analysis of Experiment Mechanochemical Treated Multi-Walled Carbon Nanotubes for Incorporation of Metal Ions Synthesis of Coil-Like Shape CNTs by Thermal CVD Method Attachment of Metal Oxide Nanoparticles on Carbon Nanotubes with Different Oxidation Levels Microstructure and Characterizations of Portland-Carbon Nanotubes Pastes Mechanical Properties of Hemp Fiber Composites with Carbon Nanotubes Reinforcement The Diamond Crystal Nucleation by Combustion Activation CVD Growth Conditions for Carbon Nanotubes and Helical Nanofibers on Copper Substrates Using Sparked Catalysts Electronic Structure of Straight and T-Shape Singled-Wall Carbon Nanotube Junctions: A Molecular Quantum Mechanics Study IX. New Nano Structural Evolution in the Processing of Fe/ BaFe12O19 Nano Composite via Mechanical Alloying Oxygen Control on Nanocrystal-AlON Films by Reactive Gas-Timing Technique R.F. Magnetron Sputtering and Annealing Effect Photocatalytic Decolorization of Red Dye in Aqueous ZnO-TiO2 Suspensions Electrode Properties of Nanostructured and Amorphous Mg1.75Nb0.25Ni Compound Produced by Mechanical Alloying Direct Synthesis of Anisotropic Metal Particles by Ink Jet Printing Technique Chitosan Clad Manganese Doped Zing Sulphide Nanocrystallites for Biolabeling The Effects of Substrate Temperature on Optical Properties and Surface Morphology of Nickel Phthalocyanine Thin Films Grown by Organic Evaporator System Electrical Characterization of Diamond-Like Carbon Films Synthesized by Plasma Enhanced CVD Technique Effects of Gold Nanoparticles on the Fabrication of Red Colored High Refractive Index Lead Glass Fabrication of Zirconia Nanofibers Using Zirconatrane Synthesized by Oxide One-Pot Process as Precursor Mechanical Property Evaluation of ZnO Thin Films Using Nanoindentation and Scanning Probe Microscope Influences of Zr4+ and Polyacrylamide on Structural and Optical Properties of ZnO Nanoparticles Prepared via Microwave Irradiation Functionalized Porous Clay Heterostructure for Heavy Metal Adsorption from Wastewater Niobium and Antimony-Modified Titanium Dioxide/Epoxy Thin Film for Proton Exchange Membrane Fuel Cell Improvement of Hydrophobic Properties of the Electrospun PVA Fabrics by SF6 Plasma Treatment Microstructure and Characterizations of Portland-Bottom Ash-Silica Fume Cement Pastes Investigation of Nanomaterials Prepared by Thermal Evaporation of Carbon-ZnO Mixtures Synthesis and Characterization of Nanostructured Materials Prepared from SiO2 and GeO2 Mixture by Carbon Assisted Method Zn2TiO4 Nanostructures Prepared by Thermal Oxidation Method CuO Nanostructure by Oxidization of Copper Thin Films Synthesis of SiO2 Nanopowder from Rice Husk Ash Preparation of Nano-Crystalline Boehmite as a Gamma-Alumina Source for the Production of Na.beta-Al2O3 Solid Electrolyte Synthesis and Characterization of Zinc Oxide Nanocrystals by Solid-State and Solvothermal Techniques Fabrication of Gold Nanocubes by the Electrochemical Method Synthesis of Gold Nanodogbones by the Seed Mediated Growth Method with Addition of Vitamin C Solvent X. Molecular Actuator and Sensor Materials Chiral Helices in a 3D Network of Zn2(en)V2O7 (en = Ethylenediamine) Time-of-Flight Measurement of Poly(3-Hexylthiophene) Thin Films Optical Properties of Metal Free and Metal Phthalocyanine by Molecular Band Calculation XI. Biomedical/Bioresponsive Design and Preparation of a Bioresponsive Hydrogel for Biomedical Application as a Wound Dressing Modification of Thai Silk Fibroin Scaffolds by Gelatin Conjugation for Tissue Engineering Substitution of Iron in Preparation of Enhanced Thermal Property and Bioactivity of Hydroxyapatite Processing, Mechanical Property Development and In Vitro Hydrolytic Degradation Studies of a Poly(L-Lactide-co- -Caprolactone) Monofilament Fibre for Potential Use as an Absorbable Surgical Suture Differential Expression of Osteogenic Differentiation in Human Umbilical Cord Wharton's Jelly-Derived Mesenchymal Stem Cells Treated with Demineralized Bone Development of a Protein-Filled Conduit for Peripheral Nerve Regeneration Electrical Properties and Microstructures of P2O5-CaO-Na2O Glasses Ultrastructural Characterization of Liposomes Using Transmission Electron Microscope Cholesteryl Cetyl Carbonate as a Smart Material for Drug Delivery Application Preparation and Drug Release Studies of Chitosan/Methoxy Poly(Ethylene Glycol)-b-Poly(D,L-Lactide-co-Glycolide) Nanocomposite Films for Use as Controlled Release Drug Delivery Study on Morphology and Thermal Stability of Nanoporous Silk Fibroin Films Preparation and Characterization of Poly(D,L-Lactide) and Silk Fibroin Nanocomposite Microparticles for Potential Use in Tissue Engineering Zwitterionic and Charge-Balanced Polyampholyte Copolymer Hydrogels XII. Speciality Polymer with Controlled Microstructures Morphology of Electrospun Mats of Soy Protein Isolate and its Blend Novel Three-Component Blends Based on Poly(L-Lactide) Chemical Resistant Improvement of Natural Rubber and Nitrile Gloves by Coating with Hydrophobic Film Effect of Nano-Porous Alumina Filler on Thermal and Electrical Transport Properties of Solid Polymer Electrolyte (PEO)12LiBF4 Characterization and Thermal Properties of Sol-Gel Processed PMMA/SiO2 Hybrid Materials Surface Treatment of Polystyrene Films with Inductively Coupled Plasma System Ring-Opening Polymerization of -Caprolactone Using Novel Tin(II) Alkoxide Initiators XIII. Others Smart Materials Investigation of the Strain Hardening and Bauschinger Effect of Low and High Strength Steel Application in Drawbead-Tester by Experiment and Numerical Simulation Extraction of Defect in Doping Silicon Wafer by Analyzing the Lifetime Profile Method Preparation and Properties Indium Tin-Oxide Thin Films by RF Sputtered for Photodetectors High Resolution X-Ray Diffraction and Raman Scattering Studies of Cubic-Phase InN Films Grown by MBE Effect of Palladium on Photocatalytic Activity of SnO2 Nanoparticles Computational Study on Thermodynamic and Structural Properties of ZSM-5 Doped by Al/Fe and Al/P Synthesis and Characterization of PLA-Based Aliphatic-Aromatic Copolyesters: Effect of Diols Synthesis and Characterization of Degradable Poly(Ethylene Terephthalate-co-Lactic Acid) and its Blends Sintering Behavior of the "-Alumina Solid Electrolyte for Battery Applications Improved Electrical Conducting Wires for SOFCs Defect-Induced Properties of Doped Alpha Alumina Samples Preparation of IR Reflective Green Pigment Thermoelectric Properties of BixSbyTezSew Nanocomposite Materials Simple Thermoelectric Module Behaviour of Various Glass Seal for Planar Solid Oxide Fuel Cell InGaPN/GaP Lattice-Matched Single Quantum Wells on GaP (001) Grown by MOVPE Effect of Substrate-Surface Orientation on the N Incorporation in GaAsN Films on GaAs Grown by MOVPE Synthesis and Thermoelectric Properties of CoSb3-yTey Sulphate-Based Flame-Retardant for Handmade Mulberry Paper Lead-Free Ferroelectric Material: Dysprosium Doped Bi4Ti3O12 Sinterbility of (Bi4-xLax)Ti3O12 Ceramics Hydrothermal Synthesis of Zinc Oxide (ZnO) Microparticle ESR and Optical Absorption Spectra of Copper (II) Ions in Glasses Enhancement of the Photocatalytic Performance of Ru-Doped TiO2 Nanoparticles Magnetic Properties of Mn Doped NiO Biosurfactant Production from Palm Oil Using Sequencing Batch Reactors: Effect of Cycle Time Cost Effective Natural Adsorbent for Fluoride Removal Effect of Bi2O3 Content on the Properties of Bi2O3-BaO-B2O3 Glass System Synthesis, Phase Formation and Characterization of Co4Nb2O9 Powders Synthesized by Solid-State Reaction A Study of the Effects of Processing Conditions on Mechanical Properties of Polypropylene/Multiwall Carbon Nanotube Nanocomposites Using Design of Experiments Influence of Substrate Temperature on Some Properties of Close-Spacing Thermally Evaporated CdTe Thin Films Effects of Potassium Fluoride Salt Additive on the Sintering Temperature and Dielectric Properties of BaFe0.5Nb0.5O3 Ceramics Effect of ZrO2 Doping in Physical Properties of Barium Iron Niobate Ceramics Production and Characterization of Polyhydroxyalkanoates (PHAs) from Inexpensive Substrates by Alcaligenes Latus Controlled-Release Material for Urea Fertilizer from Polylactic Acid Application of Artificial Neural Network to Calculate Curie Temperature of Ferromagnetic Materials Controlled-Release Materials for Fertilizer Based on Lactic Acid Polymers Fragrant Finishing of Cotton Fabric Using -Cyclodextrin Use of Hydroxypropylmethylcellulose as Thermo-Responsive Flocculant in Skim Natural Rubber Latex Microstructure and Interfaces of Thin Film Capacitors on Base Metal Foils Influence of Structural and Electrical Properties of ITO Films on Electrochromic Properties of WO3 Films Effect of DC Power on Structural and Hydrophilic Activity of TiO2 Films Oily Soil Detergency under Microemulsion Conditions: Effects of Oil Loading and Surfactant Adsorption Ferroelectric Properties of Sn-Doped PZT-PNN Ceramics

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA88225213
• ISBN:
  • 9780878493562
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zuerich
• ページ数/冊数: xx, 950 p.
• 大きさ: 25 cm
• 分類:
  • DC22 : 620.11
• 件名:
  • LCSH : Smart materials -- Congresses
  • LCSH : Nanotechnology -- Congresses
• 親書誌ID:
  • BA24926058