Advanced synthesis and processing technology for materials : selected, peer reviewed papers from the 1st International Symposium on Advanced Synthesis and Processing Technology for Materials, November 14-17, 2008, Wuhan, China

著者

• International Symposium on Advanced Synthesis and Processing Technology for materials
• Goto, Takashi
• Cheng, Yibing
• Fu, Zhengyi
• Zhang, Lianmeng

書誌事項

Advanced synthesis and processing technology for materials : selected, peer reviewed papers from the 1st International Symposium on Advanced Synthesis and Processing Technology for Materials, November 14-17, 2008, Wuhan, China

edited by Takashi Goto ... [et. al.]

（Advanced materials research, 66）

Trans Tech Publications, c2009

タイトル別名

Proceedings of the 1st International Symposium on Advanced Synthesis and Processing Technology for Materials, November 14-17, 2008, Wuhan, China

ASPT08

ASPT 08

注記

Includes bibliographical references and index

Other editors: Yibing Cheng, Zhengyi Fu, Lianmeng Zhang

内容説明・目次

内容説明

This special collection of 73 papers covers the intriguing topic of the synthesis and processing of inorganic materials using non-traditional technologies such as SHS, SPS, mechanical alloying, wet chemistry and aerosol deposition; as well as techniques involving laser, microwave, plasma, electron beam and high-field magnetron exposure.

目次

Sponsors, Committees, Preface Ceramics Investigation of Curing Process on Melt Spun Polymethylsilsesquioxane Fiber as Precursor for Silicon Oxycarbide Fibers Synthesis of SiC Based Fibers with Continuous Pore Structure by Melt- Spinning and Controlled Curing Method Effect of Nd2O3 and Sm2O3 on the Microstructure and Electrical Properties of WO3 Capacitor-Varistor Ceramics The Effect of Particle Morphology and Particle Size Distribution on the Property of Slip Casting SiC Preparation and Thermoelectric Properties of Bi-Doped Mg2Si Nanocomposites The Effect of Water-Soluble Plasticizer on Barren Raw Material Hard Plastic Extruding Course Stoichiometric Controlling of Spark Plasma Sintered Boron-Carbon Ceramics Optimal Design for Ceramic Radomes with A-Sandwich Structure Effect of Bi Doping on the Thermoelectric Properties of Mg2Si0.5Sn0.5 Compound Effect of CaO on Sintering and Crystallization of CaO-Al2O3-SiO2 System Phosphorus Slag Glass-Ceramic Reinforcement of B4C Ceramics with Multi-Walled Carbon Nanotubes Damping Properties and Mechanism of 0-3 PMN/CB/EP Composites Field-Assisted Isothermal Oriented Crystallization of SrO-TiO2-SiO2 Polar Glass-Ceramics Structure and Property of Ti-Al-C/TiB2 Composite Ceramics Synthesis, Characterization and Catalytic Properties of La4BaCu5-xNixO13+ (x=0, 1, 2, 3, 4, 5) Oxidation of ZrB2/ZrO2 and ZrB2/ZrO2/SiC Ceramics Molten Salt Synthesis and Photoluminescence of YVO4:Eu Microcrystalline Phosphors Synthesis, Characterization and Electromagnetic Wave Absorption Properties of Z-Type Hexaferrites Prepared by Molten Salt Method Carbothermal Reduction and Nitridation Synthesis of -AlON Powder under High Heating Rate Synthesis of Ultra-Fine ZrB2 Powder by Borothermal Reaction under High Heating Rate Microstructure and Properties of Mulite-FeCr Multifunctional Composite Effect of Sintering Temperature on the Properties of Porous Silicon Nitride Ceramics Effects of Coated Nano-BN Particles on Microstructure and Properties of BN-AlN Composite Erosion Resistance of Al2TiO5/Al2O3 Composites to Molten Aluminum Fabrication of Indium Tin Oxide Targets by Spark Plasma Sintering and Hot-Pressing Sintering Superfast Sintering of Nanocrystalline Y2O3 Ceramics Low-Temperature Sintering and Microwave Dielectric Properties of the Zn2SiO4 Ceramics Thermal Shock-Resistance Performance of Al2TiO5/Al2O3 Composites Effect of LaCl3 on the Properties of LAS Ceramics Preparation of Fine Mullite Powder in a SHS Chemical Furnace System Low Dimensional Materials Investigation of Bipolar Resistance Switching Properties in SrTiO3 Thin Films with Symmetric Electrodes Structure The Effect of Oxygen Annealing on the Resistance Switching Properties of the La0.7Ca0.3MnO3 Films Fabrication and Resistance-Switching Behaviors of NiO Thin Films by Thermal Oxidation of Evaporated Ni Films Synthesis of Metastable Tungsten Carbide Nanoparticles by Mechanochemical Alloying Process The Rheological Characterization of the Writing Performance of Carbon Black Gel Ink Effect of Surfactant on the Properties of Gel Ink Nickel Induced Lateral Crystallization of Amorphous Silicon Film by Electroless Planting Study on the Oxidation Resistance of 316 Stainless Steel Nano-Powder Prepared by Ball-Milling Method Controlled Growth of SnO2 Micro/Nanocrystals with Different Morphologies via a Solution Method Synthesis and Characterization of Silver Nanowires by Solvothermal Thermal Decomposition and Flame Retardance Behavior of Nanometer Magnesium Oxychloride Crystal Salt Involved in SMC Structure and Up-Conversion Luminescence Properties of Er3+-Yb3+Co-Doped TiO2 Nanocrystals Prepared by Sol-Gel Method Controlled Synthesize of BaTiO3 Nanoparticles and BaCO3 Nanowires through the Reverse Micelle System Effect of Processing Parameters on the Microstructure of Silicon Nitride Coatings by Chemical Vapor Deposition Graphitic N-Free/N-Doped Nanostructured Carbon Molecular Sieves via CVD Method and their Hydrogen Storage Laser Energy Dependent Structure of Pulsed Laser Deposited Barium Dititanate Films Synthesis and Performance of Nanocrystalline 5083 Aluminum Alloy Powders by Cryomilling Preparation of the Boron Nitride Fibers by Chemical Reaction Materials with Designed Structure (TiB2)pNi/Ni3Al/Metals Graded Materials Prepared by the Field-Activated and Pressure-Assisted Combustion Process Impact of Carbon Nanotube Aspect Ratio and Dispersion on Epoxy Nanocomposite Performance Preparation and Characterization of Pt/YSZ Composite Electrode Laser Cladding of Zr52.5Cu17.9Ni14.6Al10Ti5/TiC Composite Coating on AZ91D Magnesium Alloy for Improvement of Wear Resistance A New Process for Highly Effective Utilization of Industrial Solid Wastes - Sialite Technology Study on Low-Temperature Sintering of Microwave Dielectric Ceramics by Sol-Coating Method Synthesis of Carboxylic Acids Intercalated Mg-Al Layered Double Hydroxides by a Modified Reconstruction Method Effect of Hydrogen Peroxide on TiB2-Based Materials Preparation and Characterization of the Coated ZrB2 @ ZrO2 Ceramic Preparation and Characterization of Polyaniline/PMN Composite by In Situ Polymerization Method Dielectric Properties of PMN/CB/CIIR Composites The Effect of Particle Size on the Electromechanical Properties of PZT/PVDF Preparation of TC4-LY12 Joint by Vacuum Diffusion Welding Fabrication of Mg-W System FGM with Density Gradient by Hot-Press Sintering Quasi-Isentropic Compression Characters of Flier-Plates with Graded Impedance Influence of Buffer Layers on the Structure and Optical Properties of Na-Doped ZnO Thin Films Prepared by Sol-Gel Method Preparation of ZrC Powder by Self-Propagating High-Temperature Synthesis Preparation of Mg-Cu Composite by Tape Casting and Hot-Pressing Numerical Simulation of Dominating Control Factors of Thermal Protection FGM's Effective Thermal Conductivity Spark Plasma Sintering Process of Fe-6.5%Si Alloy from Fe and FeSi Powders Study on Electrical Properties of Carbon Fiber Reinforced Cement Paste with CCCW The Effect of Surface Hydroxyl Groups on the Properties of SR/Al2O3 Composites Synthesis of Co2O4 Microspheres by Hydrothermal-Precipitation for Electrochemical Supercapacitors Preparation and Characterization of Novel Functional Gradient Syntactic Foam Effect of Sintering Schedule on the Microstructure of Carbon Nanotubes Reinforced Alumina Fabricated by SPS Method

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA90482296
• ISBN:
  • 9780878493296
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zurich
• ページ数/冊数: xii, 297 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058