Multi-functional materials and structures II : selected, peer reviewed papers from the 2nd International Conference on Multi-functional Materials and Structures, October 9-12, 2009, Qingdao, Shandong, P.R. China
著者
書誌事項
Multi-functional materials and structures II : selected, peer reviewed papers from the 2nd International Conference on Multi-functional Materials and Structures, October 9-12, 2009, Qingdao, Shandong, P.R. China
（Advanced materials research, v. 79-82）
Trans Tech Publications, c2009
- [set]
- pt. 1
- pt. 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
International conference proceedings
Includes bibliographical references and index
内容説明・目次
内容説明
With the rapid development of science and technology, the functionalization of structural materials, and the structurization of functional materials are attracting increasing attention in the scientific and engineering fields. The development of multi-functional materials and structures (MFMS), at the micro- and nano-scale levels, has grown rapidly due to the requirement of increasing safety margins for all infrastructure, biomedical and engineering elements. Multi-functional material systems are capable of performing multiple "primary" functions, simultaneously or sequentially in time, and are specially designed to improve system performance via a reduction in the redundancy between sub-system materials and functions.
目次
Committees and Sponsors
Preface
I. Smart Materials and Structures
Study on Vibration Band Gap Characteristics of Phononic Crystal Consisted of Ti and Rubber
Study on Wheel/Rail Interaction Force Real-Time Monitoring Method Based on Piezoelectric Sensing Technology
Study on Thixo-Die-Forging of 37vol.%Al/Al2O3 Composite in Pseudo-Semi-Solid State
NiCr Electrically Conductive Coatings on Cotton Fabric by Electron Beam Evaporated Deposition
Self-Hardening Calcium Phosphate Composite Scaffold for Bone Tissue Engineering
Effect of Different Fillers on Microstructure and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene Composite
The Micro Physical Mechanism Study of Metal Rubber Material on Compressive Performance
Influence of Thickness Parameters on 2-2 Cement Based Piezoelectric Composite
Non Destructive Evaluation Based on Impedance Method Using Embedded PZT Sensor
Factors Influencing Adsorption of PH3 on Modified Activated Carbon
Synthesis and Performance Study of Polybasic Starch Graft Copolymerization Function Materials
A New Way to Manufacture a Carbon Nanotubes Supercapacitor
Synthesis of Hydroxyapatite in Microemulsion and its Adsorption Properties for Human Serum Albumin
Experimental Investigation on the Embracing Force of Medical Ni-Ti Memory Alloy Arm-Embracing Fixator
Monitoring Beam-Column Joint in Concrete Structures Using Piezo-Impedance Sensors
Structural Parameters Identification Using PZT Sensors and Genetic Algorithms
Structures and Solid-Liquid Phase Transition of High-Density Hydrogen Confined in Single-Walled Carbon Nanotubes
Effect of Fly Ash and Slag on the Resistance to H2S Attack of Oil Well Cement
Study on Filtration Performance of Cylinder Metal Rubber Filtering Material
Temperature Control Using MR Fan Clutch for Automotive Application
Wear Characteristics of Magnetorheological Fluid under Boundary Lubrication
Analysis of Water Transport Properties for Plant Structured Textile Fabric
The Energy Transition on Superhydrophobic Surface by Electrowetting Control
Resistivity Study on Early Hydration Process of Phosphoaluminate Cementitious Material
Chloride Ion Diffusion of Phosphoaluminate Cement Concrete
System-Level Modeling of Piezoelectric Energy Harvesters
Morphology Characterization and Optical Properties Analysis for Nanostructured Lanthanum Hexaboride Powders
Preparation of Ultra-Fine MgO*Al2O3 Spinel Powder and its Metallurgy Behavior in Medium Carbon Steel
Stress Corrosion of High Performance Hybrid Fibers Reinforced Expansive Concrete Exposed to Magnesium Sulfate Solution
Effect of Li on Al-Si Alloys Structure and Properties
Research on LSCMCo-CDC Composites as Improved Anode Material for IT-SOFC
Low-Velocity Impact Characteristics of Carbon Fiber Composites Lattice Core Sandwich Structures
Synthesis of Spherical Mesoporous Co-MCM-41
Crack Crazing Patterns Interaction Based on Damage Criteria
Microstructural Morphology and Phase Structure of Rapidly Solidified Hypereutectic Al-Si Alloys
Effect of Ti, Al and Mg Addition on the Impact Toughness of Heat Affected Zone in Low Carbon Steel
Study on the Feasibility of Bacterial Cellulose as Tissue Engineering Scaffold
Influence of Network Structure on Dynamic Mechanical Properties of Cross-Linked Polystyrene / Glass Fiber Composites
Micro Electrochemical Polishing of TiNi Alloy for Medical Stent
Rolling Processes and Performance of Cu-Fe In Situ Composites
Research of Electromagnetic Wave Absorbing Characteristics of Structures Consisting of LHM and RHM
Effect of Rolling Technology on the Microstructure and Properties of High Active Aluminum Alloy Anode
Active Friction Control Based on Electrorheological Effect
Effect of Steel Slag Powder on the Durability of High Performance Concrete
Effectiveness of Steel Slag Powder on Suppressing Alkali Aggregate Reaction of Concrete
Effects of Boron, Silicon on Structure and Properties of Fe-Based Superalloy
Magnetic Shape Memory Alloy and Application in Structural Vibration Control
Melt Temperature Dependence on Glass Forming Ability of Al-Mg Alloys
Study on the Viscoelastic Property of Soybean Protein Fibers
Microstructures of the Fiber-Round Hole of the Chafer Cuticle
Effects of Electric Pulse Modification with Different Technique Parameters on the Liquid Structure of Pure Aluminum
Influence of Aggregate Gradation on Mechanics Performance of Strain-Hardening Cement-Based Composites (SHCC)
Properties of Multiple-Functional Cationic Silk Fabrics
Direct Characterization of Various Deformation Microstructures in Metals by Electron Channeling Contrast Technique in SEM
Preparation and Blood Compatibility of Epoxidized Castor Oil-Based Polyurethane/Chitosan Biomedical Materials
Characteristics of a Extracellular Bioflocculant from a Serratia plumuthica Isolate
Structure and Electrical Properties of PSN-PMN-PZT Piezoelectric Ceramics for Underwater Acoustic Transducer
Internal Friction of Ti-Rich Ti-Ni-Cu Melt-Spun Ribbon
Strength Evaluation of Green Composite with Variation in Cross-Sectional Area of Plant-Based Natural Fibers
Strengthen of Porous Al2O3 Ceramics by Adding Nanoparticle ZrO2 Addition
Fly Ash-Activated Carbon Powder Composites for Dyes and Heavy Metals Removal
Simultaneous Adsorption of Methyl Orange and Heavy Metals from Solution Using Fly Ash
Optochemical Film Sensor for the Determination of Free Chlorine in Water
Study on the Tribological Properties of the Diesel Engine's Lubricating Oils Containing Nanoparticles
A 300 kHz High-Frequency Underwater Transducer
Development of Fiber-PZT Array Sensor System
Influence of the Axial Inserted Yarns on the Mechanical Properties of Multi-Angled Filament Wound Pipes
Synthesis and Characterization of Poly(D,L-Lactide)-Based Shape Memory Polymers
High-Strength Porous Ceramics Produced by Recycling Glass Fibers in Waste GFRP
Preparation Process Optimization and Characterization of an Ultra-Hard Al-Mg-B Material
Virtual Experimental Studies on Carbon Fiber Smart Materials Resistivity Tomography
Research on the Low Temperature Degradation Resistance of TiN/3Y-TZP
A New Type of Rubber Sandwich Coated Onto Ship for the Use of Underwater Explosion Shock Mitigating
Preparation of MgCl2-Coated Activated Carbon and its Adsorption Behavior of Azo Dye from Aqueous Solution
Extrusion and Evaluation of Saw Dust-Recovered HDPE Composite Bars
II. Nano-Materials and Nano-Technology
Nickel Ferrite Nanocrystallites Synthesized by Sol-Gel and Coprecipitation Methods: A Comparative Study
Synthesis and Electromagnetic Properties of Polyaniline Nanofibers Using Polyglycol as 'Soft' Template in the Aqueous Ethanol
Ultrasonically Assisted Synthesis of Tin Sulfide Nanorods at Room Temperature
Nanostructure of 45# Carbon Steel by High Current Pulsed Electron Beam
Degradation of MTBE by Using a Novel Magnetic Composite TiO2/Fe3O4 Photoreactor Design
Study on the Preparation Technology of CuO Nanometric Powders by Homogeneous Precipitation in High Intensity Ultrasonic Field
Preparation of F-Zn-Codoped TiO2 Nanoparticles and its Applications in Photodegradation of Methylene Blue
Tribological and Thermal Properties of Hybrid Kevlar/PTFE Fabric Composite Filled with Nano-TiO2
Preparation of La2Ce2O7 Nano-Powders by Molten Salts Method
Self-Assembled Nano-Structures of Sandwich-Type Mixed (Phthalocyaninato)(porphyrinato) Rear Earth Complexes. Effect of Porphyrin-Phthalocyanine Ligands on Tuning the Inter-Molecular Interaction
Mechanical Properties of Dental Nanocomposites Reinforced with Polyhedral Oligomeric Silsesquioxane(POSS)
Electromagnetic Properties of Nanometer SiC/CNTs Composite
Properties of Carbon Nanofibers Prepared from Polyacrylonitrile/Poly(methyl Methacrylate) Blend
Preparation, Characterization and Photocatalytic Performance of Nano-TiO2/Diatomite
Preparation and Characterization of Ordered Pb(Zr0.53Ti0.47)O3 Nanotube Arrays by Sol-Gel Template Method
Relative Humidity Sensing Studies of WO3-ZnO Nanocomposite
Nano Fabrication Technology of Selective Removal and Optical Assistance
Large Scale Synthesis of BaTiO3 Nanorods by a Template Way
Mechanical Nanocrystallization Surface Treatment on the Reheated 400MPa Ultrafine Grained Steel
Improved Preparation Technology of Urea Formaldehyde Microcapsules Used in Electrophoretic Display
Preparation and Characterization of Hollow TiOX Nano-Spheres for Electrophoretic Displays
In Vivo Biocompatibility Studies of Nano TiO2 Materials
Enhanced Bioactivity of Sandblasted and Acid-Etched Titanium Surfaces
Microstructure and Hardness Characterization of a NiCr/Cr3C2 Coating by High-Velocity Oxy-Fuel Thermal Spraying
Preparation of Phosphorylated Chitosan/ Chitosan/ Hydroxyapatite Composites by Co-Precipitation Method
Rapid Synthesis of Eu2Zr2O7 Nanocrystals via Salt-Assistant Combustion Method
Investigation on Recycling Technology of Carbon Fiber Reinforced Epoxy Resin Cured with Amine
Microstructure of Ultrasonic-Electrodepositing Nano-Silver Coatings
Mechanical Properties of Carbon Nanotubes Reinforced Natural Rubber Composites
Solvothermal Synthesis of Nanostructured Flakes -Ni(OH)2 Microspheres for Electrochemical Capacitors
Fabrication of Metal Matrix Nanocomposites
Structure and Wear Properties of Nano-Silicon Dioxide Modified Polyacrylate Composites
Synthesis and Thermal Stability of One-Dimensional Titanate Nanotubes
Wound Healing Based on PU/Hydrogel Nanocompounds Containing FGF-2 and Related Dressings by Radiation Method
The Application of Nanotechnology/Ultrafining Treatment Technology in the Preparation of Ultrafine Explosives
Nanostructured Ferrite Formation in Borosilicate Glass
Synthesis of Ag-Cu-Sn Nanocrystalline Alloys as Intermediate Temperature Solder by High Energy Ball Milling
Fabrication and Optical Properties of Mn-Doped ZnO Nanowires
Three-Dimensional Zinc Oxide Nanorod Networks
Effect of Carbon Fiber Composite Material Casing on Blast Power of Explosive Charge
Hydrothermal Synthesis and Characterization of Nanocrystalline Anatase Titania from Ti(OC4H9)4
The Rheologyical Effect of Carbon Nanotubes on the Iron Based Metal Powder Injection Molding Feedstock
Laser Cladding NiCrBSi+2%B4C Coating on Ti-6Al-4V
Fabrication of TiAl/B4C Composites from an Al-Ti-B4C System Reinforced by TiC, TiB2In Situ
Fabrication and Photoelectric Properties of CdTe/TiO2 Nanocrystals Multilayer
Self-Assembly of PPV/CdTe Nanocrystal Complex for Photovoltaic Device
Microstructure, Mechanical Properties and Thermal Stability of TiAlN/Si3N4 Nano-Multilayer Films Deposited by Reactive Magnetron Sputtering
Synthesis and Characterization of Methyl-Red/Layered Double Hydroxide (LDH) Nanocomposite
Surface and Composite Interface of Carbon Fiber Modified by Grafting of Diethanolamine
Controlled Fabrication of Nanocomposite with Ni Deposition on the Template of SiO2 Particles and its Magnetic Property
Preparation and Properties of Fe3O4/PMMA Nanocomposite Films
Preparation of Nanometer MgO by Ion Exchange Resin Method
Fluorescence Silica Nanoprobe as a Biomarker for Rapid Detection of Plant Pathogens
Synergy Effects of Electrospun Polysulfone/CNTs Hybrid Nanofibers Toughened and Reinforced Epoxy
A Novel Low Infrared Emissivity Material by Ni-P-CB Electroless Nanocomposite
TiO2 Hollow Spheres Obtained under Autogenic Pressure at Elevated Temperature
Preparation of Multifunctional Carbon Nanotubes/Magnetite Nanocomposites
Containing Manganese DMSs Nanostructures via a Nonaqueous Route
Synthesis and Properties of Acrylic Emulsion with Core-Shell Structure in Antifouling Paints
Effect of Samarium on the Photocatalytic Property of Sm-TiO2/CNFs Composites
Role of Alkali Treatment on Mechanical and Thermal Properties of Bamboo Particles Reinforced Polyvinylchloride Composites
Ultrasonic Effect on Refinement of Mg2Si and Mechanical Properties of In Situ Al-Mg-Si Composites
Preparation and Mechanical Properties of Epoxy Resin Reinforced with Jeffamines-Grafted Carbon Nanotubes
Multi-Functional Nanoscaled Film Deposited on PET Non-Woven by Sputtering
Synthesis and Electrochemical Properties of Nanorod Polyaniline/Activated Carbon Composites for Electrochemical Capacitor
Fabrication of SiO2@Au Core-Shell Multi-Functional Nanoparticles (MFNPs) for Imaging and Thermotherapy
Synthesis and Characterization of -Al2O3 Nanocrystalline Powders by Low Temperature Combustion Method
The Effect of Heat Treating on the Microstructure and Mechanical Properties of Cr-Cu-N Nanocomposite Thin Films
Bending Strength of Sandwich Beams with Nanocomposites Core
Fabrication and Characterization of Titanium Based Nanotubes
Methane Catalytic Cracking to Make COx Free Hydrogen and Carbons (Nanotubes, Microfibers, Microballs)
ZnS:Ag Luminescent Nanoparticles Synthesized with Different Molar Ratio of S/Zn
Rietveld Refinement of the BaTiO3 from X-Ray Powder Diffraction
Hydrothermal Synthesis and Characterization of CeO2:Eu3+ Nanopowders
Synthesis and Characterization of Cu2O/TNTs Nanocomposites
Anti-Wear and Friction-Reducing Behavior of Nano-ZrO2 Additive
Study on the Surface Modification and Dispersion of Multi-Walled Carbon Nanotubes
First-Principles Study of Lithium Absorption in Boron- or Silicon-Doped Single-Walled Carbon Nanotubes
Hydrothermal Synthesis of BaTiO3 Nanotubes on Ti Substrates
Facile Synthesis of ZnO Nanorod and Nanosheet
III. Coating and Thin Film Technologies
Characterization of Diamond-Like Carbon Coating on 16Cr-1C Martensitic Stainless Steels
Effect of Al2O3 Powders on Properties of Electrodeposited Ni Matrix
Effect of Sputtering Input Power of Co on Structure and Magnetic Properties of Fe-Co-N Thin Films
Alkylphenol Modified Phenolic-Latex Film and Effect of Humidity and Temperature on Tensile Property of Coating Fiberglass
Low Carbon Steel Surface Pretreated by Silane Coupling Agents for Preparing PE Coatings
Decomposition of Toluene at Optimal TiO2 Thin Film Photocatalytic Process Using the Taguchi Method
Photocathode Protection Properties of TiO2/V2O5 Coating
Effect of Thicknesses on the Optical and Electrical Properties of Ag Films on PET Substrates
A Novel Acrylic Resin Containing Methoxysilane Moiety and its Application in Antifouling Coating
Effect of TiO2 Nanoparticles on the Hydrophilicity of Sulfonated-Polyethersulfone
Preparation and Characterization of Antibacterial Electrospun Polyurethane Fibers Containing TiO2-Ag Nanoparticles
Effect of the Amorphous Silica Coating Derived by Sol-Gel Processing on the Oxidation Behavior of Ni
Experimental Investigation to the Displacement Instability of TGO Near Surface Groove in TBCs due to Thermo-Mechanical Cycles
Preparation of Uniform SiO2 Films on Sapphire Dome by r.f. Magnetron Reactive Sputtering
Superhydrophobic and Highly Oleophobic Cotton Textile: Achieved by Silica Particles and PFPE
Synthesis of Eu(TTA)3phen*H2O-PVP Composite Film and Study of their Luminescence Properties
High Temperature Oxidation Behaviors of Ni-Cr Based Thermal Sprayed Coatings
Study of the Ion Nitrided Layer on Ti-6Al-4V Substrate
Study of W Metallic Coating Layer on Diamond Surface by Hydrothermal Method
Characterization of Nanostructured ZnO Thin Films Deposited by Sol-Gel Spin Coating
The Biological Behavior of Endothelial Progenitor Cells on Titanium Surface Immobilized by CD34 Antibody
Preparation of WS2/MoS2/C Composite Films and their Tribological Properties
Design of Ultrasonic Vibrator for Conformal Coating Spray in LED Packaging
Crystal Orientation and Hardness of Au/NiCr/Ta Films on Si-(111) Substrate Prepared by Magnetron Sputtering
Biomimetic Artificial PVDF Film Reproduce the Superhydrophobic Property of a Lotus Leaf
Optimization of Hemocompatibility of Silicon Oxynitride Films
Electrochemical Behavior of Non-Equilibrium Coatings by Electric Arc Spraying
Corrosion-Wear Behavior of TiO2 Films in Hanks' Solution
Effects of Non-Continuous TiO2 Buffer Layers on Structural and Electrical Properties of Indium Tin Oxide Thin Films
Prepared and Microwave-Absorption Properties Investigation of -C-Fe-Si/SiC Coated Fe Nanocapsules
Thermochromic VO2 Thin Film Prepared by Post Annealing Treatment of V2O5 Thin Film
Fabrication of Ni-MF/Al2O3 Ceramic Composites
Effects of the Deposition Temperature on the Structure and Solar Control Performance of TiN Coatings Prepared by APCVD
Single Crystalline SnO2:In Films Prepared on Sapphire by MOCVD
Structural and Optoelectronic Properties of Single Crystalline SnO2:Ga Films Deposited on -Al2O3 (0001) by MOCVD
Cutting Performance of TiAlSiN Coated Cemented Carbide Tool with Post-Deposition Heat Treatment
Transparent Conducting SnO2:Zn Films Prepared on Sapphire by MOCVD
Fabrication of Self-Healing Ceramic Coating Against Oxidation for Carbon/Carbon Composite Using Polysilazane and Fillers
Effects of Nano-Al2O3p on Thermal Shock Behaviors of NiCoCrAlY Coatings by Laser Cladding
Experimental Study and FEM Analysis on Ceramic Composite Coating
Study on Fabrication and Properties of Copper-Tin-Oxide Thin Films
Fabrication of Mesoporous N-TiO2 Membrane and its Spectral Characteristics
Effect of CeO2 on Microstructure and Properties of WC/Ni60 Coating by Laser Cladding
High Li+-Ion Storage Capacity and Multi-Electrochromism Behavior of Electrodeposited Molybdenum Doped Vanadium Oxide Films
Effect of Heat Treatment on Optical Properties of Cold Spray TiO2 Coated Glass
Maleic Anhydride Coating for Strontium Aluminate-Based Phosphors
Appearance of the Mechanical Plating Formed by Zn-Al Compounding Flake Powders and its Anticorrosion
In Vitro Study of Microplasma Sprayed Hydroxyapatite Coatings in Simulated Body Fluid
Anti-Oxidation Behavior of Alumina Coating on Carbon Fibre by Sol-Gel Method
Study on Barium Strontium Titanate Thin Films Integrated on Si Substrates by Laser Molecular Beam Epitaxy
Study on Lightweight Composited Electromagnetic Shielding Materials of Flakeboard with Electroless Copper
The Effect of Annealing Atmosphere on Electrical Properties of BST Thin Films Prepared on Copper Foils
Preparation of Cu2ZnSnS4 Thin Film by So-Gel Spin-Coated Deposition
Preparation of Super-Hydrophobic Polyethersulphone Membrane by Sol-Gel Method
Optical and Electrochromic Properties of Sol-Gel Deposited Mixed MoO3-WO3 Thin Films
Tailoring Photocatalytic Properties of Tungsten Oxide Thin Films
A DFT Study on the Geometric Structure and Magnetic Properties of (FeAl)n (n 4) Clusters
Preparation and Magnetic Properties Studies of Granular FePt Composite Films for High-Density Magnetic Recording
Fabrication of (200)-Textured NiO Films on Glass Substrate Using Radio Frequency Sputtering
Investigation of Cold Sprayed NiCoCrAlY Bond Coating
Preparation and Electrochromic Properties of Mesoporous WO3 Film
Preparation and Characterization of Lanthanum Self-Assembled Nano-Films
Deposition of Fluorocarbon Thin Films on Polypropylene Substrate by RF Magnetron Sputtering
Study on Technological Process of Cerium-Based Conversion Coating on Aluminum
Surface Morphology and Structure Study of Titanium Dioxide Thin Films Deposited on PET Substrates
Synthesis of CdS Nanoparticle/Amphiphilic Block Copolymer Composite Films and its Characteristics of Microstructures and Optoelectronic Properties
Characterization and Annealing Effects of Titanium Dioxide Films Prepared by a Sol-Gel Process
Atomic Structure of Hydrous Ruthenium Oxide Coating on Ti and CNT Substrate by Cathodic Deposition Method
Characterization and Photocatalytic Activity of Composite La-TiO2/ITO Thin-Film Electrodes
Induction Heating Deposition of Calcium Phosphate Coating on Carbon/Carbon Composites for Biomedical Applications
EBSD Study of Crystallographic Identification on Fe-Al-Si Intermetallic Phases in Aluminide Coatings on Mild Steels
Effect of Annealing on Magnetic Properties and Domain Structures of FePt Thin Films by Rapid Thermal Annealing Technique
Influence of Substrate Temperature on the Characteristics of LaB6 Films
Effects of Annealing on the Optical and Electronic Properties of Poly (vinylidene fluoride-trifluoroethylene) Copolymer Thin Films
Influences on Optoelectronic Properties of Damp Heat Stability of AZO and GZO for Thin Film Solar Cells
Glass Fibers Covered with TiO2 Thin Films by Sol-Gel Method as a Photocatalyst Reactor to Degradation Toluene
Application of V2O5 in Thin Film Microbatteries Prepared by RF Magnetron Sputtering
Coating Time Effect on Surface Structures of Silica-Encapsulated Gold Nanoparticles
Photoaided Cathodic Protection of TiO2 Nanoparticle Coating on 304 Stainless Steel Substrate
The Photoelectrochemical Characteration of Porous Titania Dioxide Thin Films Prepared by PEG-Assisted Sol-Gel Method
Preparation and Characterization of CePO4 Coated ZrO2 Composite Powders by Hydrothemal Method
Effect of Gelatin on the Performance of Cerium-Based Conversion Coatings
IV. Materials Corrosion and Protection
The Corrosion Mechanism of Cu-Containing Weathering Steel in a Cyclic Dry-Wet Condition
Study on Resistance to Sulphate Attack of Polymer Modified Sulphoaluminate Cement
Preparation and Properties of Composite Antibacterial Agent Containing Copper and Zinc Ions
Visible Light Activated Photocatalytic Degradation Effect of V-TiO2 on Azo Dye Wastewater
Anti-Biofouling Property of a Novel Cross-Linkable Copolymer Grafted a Short Semifluorinated Aromatic Side Chain
The Preliminary Study on Antifouling Mechanism of Shark Skin
Study of the Inhibition Mechanism of Imidazoline Derivative Inhibitor on CO2 Corrosion for Q235 Steel
Effect of Alternating Pressure of Seawater on Protective Properties of Organic Coating on Steel Substrate
Preparation and Characterization of Cu-Inorganic Antibacterial Material Containing Rare Earths
Pitting Susceptibility and Semiconducting Properties of Passive Films of 18Cr-18Mn-2Mo-0.9N High Nitrogen Austenitic Stainless Steel
Fabrication and Corrosion Behavior of Electroless Ni-W-P Coating on Magnesium Alloy
The Research on Endothelialization of the Ti-O Films Surface Modified by Plasma Implantation and Immobilized with Ln and Fn
Influencing Factors of 1Cr13 SSCC for Oil & Gas Wellhead
Adhesion and Corrosion Resistance Properties of TiC/Ti(CN)/TiN Multilayer CVD Coatings on 42CrMo Steels
Influences of Aging Precipitation on Corrosion Resistance of 18Cr-18Mn-2Mo-0.77N HNS
Corrosion Behavior of Al-Si-Cr-Cu Bearing Low Carbon Steel in A Cyclic Dry/Wet Laboratory Test
The Improvement of Durability of Marine Wood with Polymer and its Mechanism
Investigation on Inhibitor Electromigration Anticorrosion Technology for Reinforced Concrete Structure
Studies on Crack Propagation of Carbon Fiber Reinforced Epoxy Resin Composite
Acridine as Effective Corrosion Inhibitor for Hot Dipped Coatings on Steels in Diluted HCl Solution
Influence of In Situ MgO Coating on Corrosion Resistance of Pure Magnesium in Normal Saline
Effect of Boron on Magnetic Properties and Corrosion Resistance of High Energy Magnets
Low Driving Voltage Aluminum Alloy Anode for Cathodic Protection of High Strength Steel
Hydrogen Permeation Characterization of Hot-Dip Galvanized Steel in Simulated Marine Atmospheric Environment
Synthesis and Characterization of Polyorganosiloxane Modified Waterborne Polyurethane
Synthesis and Gas Sensing Properties of Urchin-Like CuO Self-Assembled by Nanorods through a Poly(ethylene glycol)-Assisted Hydrothermal Process
Corrosion Inhibition of Dissymmetric Bis-Quaternary Ammonium with Imidazoline Ring on Q235 Steel in 1.0 mol*L-1 Hydrochloric Acid Solution
Water-Based Polyaniline/Montmorillonite/Epoxy Composite Coatings for the Corrosion Protection of Mild Steel
Corrosion Protection of a SiCp/ZL101 Composites by Using Plasma Electrolytic Oxidation Method
Corrosion Resistance of Rare Earth Modified Chromizing Coating on P110 Oil Casing Tube Steel by Pack Cementation
Natural Antifouling Materials from Marine Plants Ulva pertusa
Effect of Catalytic Crystalline Waterproof Coatings on Steel Reinforcement Corrosion of Concrete
Erosion Resistance of TiC/Fe Composite at High Temperatures
Analytical Characterization and Corrosion Behavior of Non-Functional Bis-Silane Pre-Treated Carbon Steel Substrates
Finite Element Simulation of Lamb Wave with Piezoelectric Transducers for Composite Plate Damage Detection
Electrochemical Corrosion Behavior of Cu-15Ni-8Sn Alloy in Marine Microbial Medium
The Doping of Ag+ Enhanced the Antibiocorrosive Effect of Titania in Seawater under Visible Light
Study on Corrosion Behaviors of Copper Manganese Aluminum Alloy in Microbiologically Influenced Corrosion
Microbially Influenced Corrosion of Copper by Marine Bacterium Vibrio natriegens
New Application of the "Underwater Super-Hydrophobic" Surface in the Corrosion Protection
Study onCorrosion Behaviour of AISI 316L Stainless Steel Treated with Air Cold Plasma
Inhibition Microbial Adherence of Superhydrophobic Surface on Aluminum in Seawater
V. Computer Modeling and Analysis
Numerical Study on Rapid Solidification of a Plasma-Sprayed Cast Iron Splat on a High-Temperature Substrate
Structural Design and Performance Testing of Flexible Fabric Keyboard Switch
Notched Tensile Fracture of Ti-6Al-6V-2Sn Welds at Elevated Temperature
Calculation of Flexural Capacity of Steel Reinforced Concrete Beams Strengthened with FRP
Research on Chaotic Behavior of Concrete under External Load Based on Discontinuous Medium Mechanical Model
Coupled Numerical Analysis of the Anti-Crack Mechanism for Open-Graded Large Stone Asphalt Mixes
Finite Element Method Simulation of 35# Steel Cathodic Protection Models in the Seawater
The Effect of Creep on Morphology Change of Surface Groove on Fecralloy in TBCs during Thermal Oxidation Cycles
Numerical Investigation on the Effect of Copper Filler Thickness on the Brazed Residual Stress
Mathematical Modeling of the Fracture Toughness of Phenol Formaldehyde Composites Reinforced with E-Spheres
Numerical Simulation of Thermal Cycle of In-Service Welding on X70 Steel Gas Pipeline
A Study on Process-Induced Warpage of Curing Mold of Composite Structures
Calculation and Analysis of Valence Electron Structures of the Precipitated Phases in Al-Cu Alloy
Identification of Delamination in Anisotropic Laminated Plate
Atomic Simulation of the Bending Deformation of a Single-Crystal Simply Supported Nano-Beam
Three-Dimensional Numerical Simulation of Residual Stresses by Shot-Peening
Quantum Chemical Calculation of Maleic Anhydride Ring-Opening Reaction
Theory Study of the Geometrical Isomerism Influence on Hole-Transport Material's Residual Potential of Organic Photoconductive
First-Principles Calculations on the Geometry and Electronic Structure of Rutile TiO2 (110) Surface
Dynamic Models for Magnetorheological Dampers and its Feedback Linearization
Simulation on Uniaxial-Tension Behavior of NiTi Shape Memory Alloy Films
Experiment Research on Purifying Metallurgical Grade Silicon and Crystal Growth in Directional Solidification
Polyethylene Rubber Composite Target Resistance to Jet Penetration
A Study on the Advanced Surface Characteristic of Yttria (Y2O3) Ceramic by Using Optimal Design of Process
The Gradual Damage Analysis for the Two-Dimension Unit Cell of the Composite
Process Analysis and Numerical Simulation of Equal Channel Angular Pressing and Torsion (ECAPT)
Studies on Magnetic Shielding Effectiveness by Finite Element Method
Experimental Researches on the Mechanical Properties of Three Dimensional Multidirectional Braided Composites
Buckling Response of Metallic Foam Composite Sandwich Panels Subjected to Edgewise Compression
Electronic Structure and Optical Properties of Non-Metals (N, F, P, Cl, S)-Doped Cubic NaTaO3 by Density Functional Theory
First-Principles Study of the Electronic Structure and Spontaneous Polarization of PbZr0.4Ti0.6O3
First-Principles Study on the Conductive Properties of P-Doped ZnO
Atomic and Electronic Structure of LaAlO3 and LaAlO3:Mg from First-Principles Calculations
Kinetics of Sol-Gel Transformation for the Preparation of TiO2 Ultrafiltration Membrane
Experimental and Numerical Study of the Influence of a Low-Frequency Electromagnetic Field on the As-Cast Structure of Horizontal Direct Chill Casting Aluminum Alloy Slab
3D Fem Study of Fluid Flow in the Mould for Billet Continuous Casting
Modeling and Testing for Small-Scale Time Delay Device Based on Magnetorheological Fluid
Effects of Materials on Formation of Double-Layered Liners Shaped Charges
Synthesis and Formation Mechanism of Hollow Carbon Spheres Containing Fe3N Nanocrystals
Numerical Simulation on Characteristics of Dense-Phase Pneumatic Conveying in Horizontal Pipe
Molecular Simulation of the Interfacial Properties of an Epoxy Composite Reinforced Using a Carbon Nanotube/Carbon Fiber Hybrid
A Study on the Crack-Controlled Layer of UHTCC in Functionally-Graded Composite Beams
Numerical Study on the Mechanical Behavior of Aluminum Foam Material Using CT Image
Effects of Magnetic Field Gradient on Particle Distributions of Suspension Comprised of both Magnetic and Nonmagnetic Particles Using Two-Dimensional Monte Carlo Simulations
Modeling of Dynamic Characteristics of Ionic Polymer-Metal Composite Beam near Resonant Frequencies
Recent Development of Molecular Simulation Based on GPU in Material Science
Nonlinear Dynamic FE Simulation of Smart Piezolaminated Structures Based on First- and Third-Order Transverse Shear Deformation Theory
Modeling and Simulations of Pd/n-ZnO Schottky Diode and its Comparison with Measurements
Modeling and Optimization of Nanomechanics of Diamond-Like Carbon by MPCVD Using Response Surface Methodology
Study on Nanomechanical Properties of Dragonfly Wing
Numerical Study on Damage Response of Ship Composite Armor Structures to Contact Underwater Explosion
Electronic Structure of Bimetallic FemAln (m+n=6) Clusters
First-Principles Calculations of Structural and Elastic Properties of Hexagonal Boron Nitride
VI. New Technologies of Materials Preparation
In Air Synthesis of Bi2S3 and PbS Microcrystals by Thermolysis of Single-Source Precursors
Micromechanical Modeling of the Effect of Progressive Damage on the Tensile Behavior in Fiber-Reinforced Polymer Composites
Magnetic Properties of MWNTs-Fe3Al Composite
Studies on Synthesis, Morphology and Theoretical Analysis of Schiff Base Derived From p-Aminobenzoic Acid and p-Hydroxybenzaldehyde by Solvent-Free Reaction Using Jet Milling
Preparation and Characterization of Ion Exchange Resin Mixed Polyethersulfone Hybrid Membranes
Convective Heat Transfer Steady Thermal Stress in a Ceramic/FGM/Metal Composite EFBC Plate with Temperature-Dependent Material Properties
Performance Deterioration Behavior of Existing Reinforced Concrete Bridges
Low-Temperature Preparation of Biomorphic TiC/C Ceramic in Molten Salt Media
Synthesis of Al8B4C7 from Al/ Na2B4O7*10H2O/C Mixed Powders
Infrared Heating Applied in Titanium Brazing
Light Induced Ferroelectric Domain Nucleation in LiNbO3 Crystal
Experimental Analysis and Performance Evaluation of Magnetorheological Damper under High Impact Load
Fracture Test and Numerical Analysis of Structural Steel Notched Plates Based on Generalized Strength Model
Research on Surface Color, Properties of Thermo-Treated Reconstituted Bamboo Lumber after Artificial Weathering Test
Flexural Strength of Phenol Formaldehyde Composites Post-Cured in Microwaves: Preliminary Results
Effect of Mn and Cu on Spheroidized Process of Mg-Zn-Y-Based Icosahedral Quasicrystal Phase
Magnetic Properties and the Giant Magneto-Impedance in Joule-Heated Glass-Covered Co-Based Microwire
Design and Analysis of a Ring Type Traveling Wave Ultrasonic Motor Using Cantilever Type Composite Transducer
Microstructure and Tensile Property of Zn-Al Alloy Reinforced with Titanium Produced by Electrolysis
The Microstructure of The Semi-Solid ZL201 Alloy Obtained by Near-Liquidus Electromagnetic Casting and the Fine Mechanism
Semi-Solid Thixoforming Simulation of ZL201 Alloy Parts via AnyCasting
Experimental and Thermal Analysis of Sheet Molding Compound with Magnesium Oxychloride Crystal Salt Using as Flame Retardant
Release of Aspirin from Biodegradable Polyesterurethane Networks
Synthesis and Characterization of Thermotropic Liquid Crystalline Polyesters/Glass Fiber by In Situ Process
Characterization of Hot Deformation of Nb-V-Ti Microalloyed Steel Using Processing Map
New Magnesium Alloys for Potential Application of Implantation Biomaterial
Far-Field Solution of Circular Lining and Linear Crack by SH-Wave
PVDF Films with Superhydrophobic Surface Fabricated by Plasma-Enhanced Chemical Vapor Deposition
Coupled Deflection Analysis of SMA Fiber Hybrid Composite Active Blade
Laser Surface Alloying of NiCr-Cr3C2 and C-B-W-Cr Powders on Nodular Cast Iron Rolls
Microstructures and Wear-Resistant Properties of In Situ WCp/W Wire Hybrid Reinforced Iron Matrix Composites via Electromagnetic Field
Synthesis and Stability of Cubic Silicon Nitride
Instability of Functionally Graded Panels with Structural Damping under Supersomic Flow
Synthesis, Structure and Electrochemical Behavior of a Supramolecular Compound
Synthesis and Electrochemical Behavior of Two Microporous Polyoxomolybdates
Solid Reaction and Microstructure of Interface of 3D Meshy SiCn/Cu Composite
Fracture Behavior of Particle Reinforced Metal Matrix Composites
Moderation of Entrance Pressure Drop and Extrudate Swelling of Wood Fiber/Polypropylene Composites Melt in Rotating-Die Extrusion Process
Diethylenetriamine-Assisted Hydrothermal Route to Synthesize Cuboidal Structure of PbSe Crystal
Microstructure and Mechanical Property of 2.5D C/SiCN Composite
Influences of Fe2O3 Doping on the Crystallization of SiO2-Al2O3-MgO-K2O-ZrO2-F Glass-Ceramics
Effect of Cold Rolling Deformation on Aging Precipitation of Cu-Cr-Sn-Zn Alloy
A Green Approach to Preparing Nanosized Hollow Silica Microspheres with Waste Polystyrene
Investigation about Corrosion Properties of AZ31 Magnesium Alloy Coupled with Nitrided 40Cr Steel
Resolution Wavelet and Online Damage Detection for Composite Material Structure Dynamic Response Signal
Effects of Ultrasonic Vibration Treatment on Microstructure of Heat-Resistant Al-Si Alloy
Preparation and Property of Wood Polymer Composite with a Two-Step Method
Preparation, Cytotoxicity and Degradability of Chitosan-Based Thermosensitive Hydrogels as Drug Delivery System
Preparation and Characterization of Ga2xIn2(1-x)O3 Films Deposited on -Al2O3 (0001) by MOCVD
Structural and Optical Properties of SnO2 Films Grown on 6H-SiC by MOCVD
Heterogeneous Preparation of Polyaniline-Cellulose Conductive Composites with Cellulose Pretreated by Ultrasonic and its Electrical Properties
Synthesis and Characterization of Polyaniline/Montmorillonite/La3+ Nanocomposites
Polyaniline/Graphitenanosheets/Eu3+Nanocomposite: Synthesis and Characterization
Synthesis and Characterizations of Cubic Assembly Composed of Platinum Nanoparticles
Mechanism Researches on the Mutual Adaptability and the Dispersivity and Stability of Nanoparticle-Modified Asphalt Composite
Notched Strength Prediction and Verification of APC-2 Composite Laminates at Elevated Temperature
Coprecipitation Synthesis and Negative Thermal Expansion of R2Mo3O12 (R = Y, Yb)
Characterization of Wear Performance of Micro-Plasma Surface Hardened Layer
Synthesis and Characterization of Highly Branched Poly(urethane-imide)s
Electrical Behavior of SiCp Reinforced Copper Matrix Composites by Hot Pressing
Morphology of Electrospun Natural Rubber with Acrylonitrile-Butadiene-Styrene
Research on Heat Treatment Process of Foam Glass Prepared by Titania-Bearing Blast Furnace Slag
Structure and Properties of Epoxy Resin/Poly (aryl ether ketone) Blends Cured with 4,4'-Diaminodiphenylmethane
Bending Characteristics of Electrical Responsive Poly(vinyl alcohol)/Poly(acrylic acid) Semi-Interpenetrating Polymer Network Hydrogel under DC Electric Field
Mechanical Properties and Applications of CFRP in Retrofitting and Repairing Reinforced Concrete Short Columns
Influence of Doped Mn, Cu, Ni and Fe on Electrical Properties of SrTiO3 Ceramics
Preparation and Properties Analysis of Polyaniline/Nano-SrFe12O19 Composites with Different Morphologies
Microstructure and Properties of Ti-Al Based Composite Coating Prepared by Electrospark Deposition Process
Influence of DC-Joule Heat on Giant Magneto-Impedance of Co-Based Melt Extraction Wires
Structure and Properties of Hydrogen-Charged Electrochromic Nb2O5 Ceramics
Synthesis and Property of Y-Shaped Thermoresponsive Block Copolymers
Effect of Pore-Forming Agents on Structure and Properties of PVDF/PVC Blend Membranes
A Novel Bioadhesive Protein of Silk Filaments Spun Underwater by Caddisfly Larvae
Electrodeposition of Silicon in Organic Solvent Containing Silicon Chloride
Thermoelectric Properties of Y-Doped Mg2Si Prepared by Field-Activated and Pressure-Assisted Reactive Sintering
Preparation of Amorphous Calcium Phosphate/Triclcium Silicate Composite Powders
Preparation and Structural Phase Transitions of Silver Palmitate
Permanent Mold Suction Casting for TiAl Based Alloys
Microstructure Evolution of Directionally Solidified Al-25at.%Ni Peritectic Alloy
The Preparation of Ti-6Al-4V Alloy Rod and Blade by Metal Mold Suction Casting and the Effects of Hydrogen on Them
The Research of SOL Treated Cantilever Beam Based on Analytical Methods and ANSYS
Research on the Anti-Static and Anti-Radiation Properties of Fabrics Containing Stainless Steel Microfilament
In Situ Growth of Carbon Nanotubes in Hydroxyapatite Matrix by Chemical Vapor Deposition
Morphological Characterization of Chitosan in the Hydroxyapatite/Chitosan Nanocomposites
Research on the 1.06 m Reflectivity of Subwavelength Surface-Relief Structure via Finite Different Time Domain Method
Phosphotungstic Acid/Semi-Coke Catalysts for Oxidative Desulfurization of Diesel Fuel
Study on Microstructure and Properties of Aged Cu-Ti-Zr-RE Alloy
Fabrication and Evaluation of Electrolyte-Supported Hollow Fiber Solid Oxide Fuel Cells
Hydrogen Permeation Performance and Chemical Stability of Ni-La1.95Ca0.05Ce2O7- in an H2S-Containing Atmosphere
The Study of Ultrasonic Dynamic Elastic Modulus of TiNiFe Shape Memory Alloy in Heating Process
Switching Porphyrin Fluorescence on and off through Redox
Structure and Photoluminescence Investigations of Self-Organized InAs/GaAs Quantum Wires
Crystal Structure and Optical Spectra of Er:NaLaxYb9-x(SiO4)6O2 (x=0,3,5,7,9) Crystals Prepared through a Hydrothermal Routine
A New Phosphate-Bonded Investment Material for Rapid Ceramic Molding of Medium-Size Castings
Research on Purification of Attapulgite Clay and Adsorption Characteristics for Metal Cations
Preparation and Properties of Novel Bonded Perovskite Manganite Oxides
High-Frequency Vibration Response of Metal Honeycomb Sandwich Structure
Accurate Displacement Measurement for Landslide Prediction by Sampling Moire Method
Study on Dynamic Friction Process of Sweat Self-Lubricating Composite at Elevated Temperature Based on CA Method
Influences of Pretreatment Solution Concentrations on Copper-Doped SiC Particles Made through Electroless Plating Technique
Crystal Orientation and Surface Morphology of Sono-Electroplated Zinc Film from Alkali Zincate Bath
Manufacturing of Heavy Plates with Excellent Mechanical Properties by a 40t ESR Furnace for Slab Products
Study on the Toughness Performance of Polypropylene Fiber and SBR Polymer Latex Modified Cement Mortar
Formation Enthalpies of 18 Carat Au-Cu-Ni-Zn-RE Alloys Calculated With Chou' Models
Investigation on Interlaminar Mechanical Properties of Hybrid CFRP/VGCF Laminates
Preparation and Characterization of Nature Rubber/Attapulgite Composites
Studies on Preparation and Property of 2.5D SiO2f/ SiO2 Composites
Experiment Study on the Chloride Penetration of Steel Fibre Reinforced Concrete
Microstructure and High Temperature Oxidation of the Hot-Dipping Al-Si Coating on Low Carbon Steel in Ethanol, Water Vapor and Air at 700 DegreesC
Interlaminar Shear Strength of Glass Fiber Reinforced Dially Phthalate Laminates Enhanced with Nanoclays
Experimental Study for Performance Influence of Various pH Values on Pavement Straw Composite Fibers
Hydrothermal Synthesis and Electrochemical Study of VOx/CNTs Composites
Microstructure Evolution and Mechanical Properties of 7A09 Aluminum Alloy during Rapid Solidifications
Preparation of Semi-Solid Billet with Less Liquid Content of 7A09 Aluminum Alloy by Partial-Melting Method
Study on Antibacterial Mechanism of Ag-Inorganic Antibacterial Material Containing Lanthanum
Interface Strength and Structure of Explosive Welding Sainless Steel-Aluminum Clad
Preparation of High-Purity YAG Powders by Gel Solid-State Reaction
Low Temperature Synthesis of Magnesium Aluminate Spinel from AlOOH and MgO Powder
Thermal Energy Discharge Characteristics of a PCM Heat Exchanger with Calcium Chloride Hexahydrate
Sedimentation Equilibrium of Ultrafine A1(OH)3 Particles in Aqueous Solution
Fabrication and Properties of Ce3+ and Tb3+ Co-Doped Ca2SrAl2O6 Phosphor
Preparation of Nitrogen Doped ZnO Dilute Ferromagnetic Semiconductor by Magnetron Sputtering
Oxygen Reduction Electrocatalysts Based on Two-Dimensional Iron Polyphthalocyanine
Low Velocity Impact Damage Evaluation of 2D C/SiC Composite Material
Fabrication of Polystyrene-Encapsulated Nanodiamond via In Situ Latex Polymerization and their Wettability Evaluation
Investigation on Microwave Absorbing Properties of Double-Layer Cementitious Composites
Preparation and Properties of Nano-Inorganic Mineral Material as Lubricating Oil Additive
Growth of Carbon Nanocoils Using Chemical Vapor Deposition
Flexural Testing of Fiber Reinforced Polymer-Concrete Composite Bridge Superstructure
Damping Performance of Cocured Composite I-Shaped Beams with Embedded Viscoelastic Layers
Anti-Wear and Reduce-Friction Ability of ZrO2/SiO2 Self-Lubricating Composites
Developing a New Method for the Formation of NiO Hollow Microspheres Using Yeasts as Bio-Templates
Study on the Wear Resistance of ZnAl27 Composite Reinforced by SiC Particles
Effects of Chlorine Ion on the Photocatalytic Activity of Cuprous Oxide Powders Prepared by Hydrothermal Method
Preparation of Low Chlorine Shellac from Seedlac by Dechlorination Process Using Pd/Fe Binary Metal as Catalyst
Synthesis of NH2-Functionalized Nano-Fe3O4 Magnetic Polymer Adsorbent and its Application for the Removal of Cr (VI) from Industrial Wastewater
Improvement on the Efficiency of Drawing during the Production of Microfibrillar Composites
A Study of Surface Treatment on LY12 Aluminum Alloy by -APS
Thermal Parameters of Sweat Lubricating Composite and its Effect on High Temperature Rolling Bearing
Research on the Growth Mechanism of Alumina Ceramics with Columnar Grain
Research on Zinc-Silica Composite Plating
Experimental Research on the Preparation of Porous Activated Carbon from Orange Wastes
Effects of Different Cooling Rate and Modifiers on the Microstructures of 4Y32 Aluminum Alloy
Study on Seawater Corrosion of Fe-Al Intermetallic Compound
The Uniform Elongation of Web and Flange of H-Beam
Damage Evolution of Delayed Fracture in Woven GFRP under Hot Water Environment
Oriented Growth of cBN Crystals Along [100] Direction in Hydrothermal Conditions
Influence of Dye-Polyether Derivatives Architecture on Parent C. I. Disperse Yellow 64 Dispersion
Preparation of Inorganic/Organic Hybrid Membrane Adsorbents for Gasoline Desulfurization: Control of the Membrane Structure
Dry Sliding Wear Behavior of Fe3Al Intermetallics Prepared by Mechanical Alloying and Hot Pressing
Carbonate Steelmaking Slag to Manufacture Building Materials
Through-Thickness Texture Variation in Non-Oriented Electrical Steel Sheet Produced by Asymmetric Rolling
Plastic Deformation and Damage Behavior of AL6XN Super-Austenitic Stainless Steels
The Concentration Fluctuation near Critical Temperature of Liquid Bi33.3Ga66.7 Alloy
Strength Prediction of Connecting Frame in Aircraft Composite Cabin
Mechanism of Steel Corrosion Inhibition Using Mannich Bases
Wet Surface Modification of Light Calcium Carbonate Powder by Aluminate Coupling Agent
Process Optimization of Preparation and Performance Characterization of Oily Sludge-Based Adsorbent Material by Pyrolysis
Superdeep Penetration - Novel Method of Nanoreinforced Composites Producing Based on Metallic, Ceramic and Polymer Matrixes
New Methods of Preparing Multi-Functional Nanocomposite Coatings
Sic Based Ceramic Foams Reinforced by In Situ Mullite Whisker
Corrosion Properties of Magnetron Sputtered Al-Mg Alloy Coatings on High-Speed Electro-Galvanizing Steel
Fabrication of (TiB2, TiCx)/B4C Composites via Ti3Al IMC Added in B4C Ceramics
Thickness Measurement of Composite Material Using Eddy Current Testing
Preparation of pH Sensitive Polyacrylic Acid(PAAc) Macroporous Hydrogels in Aqueous NaCl Solutions and their Characterization
Effect of Small Addition of Niobium on the Mechanical Properties of FGBA/ BG Duplex Phase Air Cooling Bainitic Steel
Microstructure and Electrical Properties of La2O3-Doped ZnO-Bi2O3 Based Varistor Ceramics
Mechanical Properties and Ablation Behavior of Machinable ZrB2-SiC-BN Ceramics
Microstructural Evolution and Mechanical Properties of Powder Hot Extruded Al-Zn-Mg-Cu Alloy
Phase Evolution and Sintering Characteristics of Mullite-Based Ceramics Prepared from Coal Fly Ash, Calcined Bauxite and Ball Clay
In Situ Observation of the Growing Surface Morphology of KDP Crystals by Microscope
Improvement Properties of Recycled Polypropylene by Reinforcement of Coir Fiber
Detection and Characterization of Fatigue Induced Damage Using Electromechanical Impedance Technique
Synthesis and Characterization of Platinum-Containing Ordered Mesoporous Carbon with High Specific Surface Area
Functional Silica Aerogels with High Specific Surface Area: Influence of Preparation Conditions on Structure Properties
Synthesis and Characterization of Water-Soluble Cu2+-Doped ZnSe Quantum Dots
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete
Pyrolysis Kinetic of Basic Zinc Carbonate from Spent Catalyst and Preparation of Active ZnO by Microwave Heating
Preparation and Biological Activity of Chitosan Fibers Reinforced PLLA/HA-CaSiO3 Composites
Synthesis and the Characterizations of Structure and Function of Gallic Acid Microcrystalline Cellulose Ester
Electrical Response and Mechanical Behavior of Plasticized PVC Actuators
Effect of Disbond Propagation on the Reflected Spectra of CFBG Sensors Embedded within the Bondline of Composite Bonded Joints
Influence of Zinc-Zirconium Substitution on Magnetic Properties of Ba(ZnZr)xFe12-2xO19 Hexaferrite Prepared by the Molten Salt Method
N-(n-butyl)-3-aminopropyltrimethoxysilane-Functional Modified Pyrophyllite: Preparation, Characterisation and Pb(II) Ion Adsorption Property
Alkali-Activation Reactivity and Al Environment of Chemosynthetic Al2O3-2SiO2 Powders
Synthesis, Characterization and Properties of a Novel Soluble Polyester Based on Fluorene
Performance and Tribology of Polymer Matrix Friction Material Reinforced with Fibers
Study of the Morphology and Antibacterial Properties of Nano Silver Films Prepared on Regenerated Cellulose Substrate
Synthesis, Morphology and Photophysical Properties of Rod-Coil Copolymers
Investigation on the Tap-Hole Clay under Thermal Processing
Preparation of Core/Shell Composite Latex Particles and Toughening Modification for Polyamide 6
TEM Microstructural Investigation of 0.63C-12.7Cr Martensitic Stainless Steel during Various Tempering Treatments
Dependence of Aspect Ratio on1-3 Polymer/Cement Based Piezoelectric Composite Properties
Synthesis, Characterization and Photocatalytic Performance of Novel Composite Ag/ BiVO4 Photocatalysts
A Study on the Coating of Acupuncture Needle with Bioceramics to Improve Insulation Performance
Catalyst Assisted Synthesis of Carbon Nanotubes Using the V-Shaped Pyrolysis Flame Method
Photocatalytic Reduction of Methyl Orange Using Titania Photocatalyst Codoped with Nitrogen and Gadolinium under Visible Light Illumination
Preparation of Cuprous Oxide from Industrial Leaching Liquid Using the Microwave Thermo-Ethanol Method
Epoxy Curing System with Liquid 1,3-Bis(3-aminopropyl) tetramethyl Disiloxane as Curing Agent for Advanced Electronic Package
Optimization of Annealing Treatment Parameters in a Twin Roll Cast and Warm Rolled Mg-4.5Al-1.0Zn Alloy
High Temperature Thermoelectric Properties of Oxide Ca2Co2O5
Investigation on the Sound Absorption Properties of MPA/MR
Effects of Aluminizing on the High Temperature Oxidation Behavior of High Silicon Cast Iron
A Facile Method of Surface Modification Based on the Adhesive Behavior of Poly(dopamine) on Copper
Fabrication and Electric Properties of SrTiO3- /Nb-SrTiO3 Heterjunction
Effect of Fluctuation in Fiber Orientation on the Young's Modulus of Green Composites
Multiscale Bone Remodeling Prediction for Fully Porous-Coated (FPC) Dental Implant Supported Prosthesis
The Effect of Excess Silane-69 Used for Surface Modification on Cure Characteristic and Mechanical Properties of Precipitated Silica Filled Natural Rubber (PSi/NR)
Influence of Curing Process on the Performance of Epoxy Thermosets
Research on the Antifouling Mechanisms of Copper and its Alloys
The Effect of Second Filler on Cure Characteristic and Mechanical Properties of Si-69 Treated Precipitate Silica/NR Composite
Study of AMP-Activated Protein Kinase Agonists by Structure-Based Drug Designing
Behavior of Heavy Plastic Deformation of Cu-15Cr-0.1Zr In Situ Composite
Effect of Electrode Shape on Power and Internal Resistance in Benthic Microbial Fuel Cell Material on Marine Sediment
Tribological Characteristics of Surface Treatment for Piston Pin
Synthesis of Crosslinkable Core-Shell Emulsion and Rheology of the Core-Shell/Amine Crosslinking Process
Electronic Structure Study of Metal Complex {1,1'-[ o-Phenylenebis(nitrilomethylidyne)]di-2-naphtholato}Copper(II)
A Structural Improvement of Breaker Plates and Analysis of their Dynamic Properties in Polymer Tube Extruders
Fabrication and Residual Stresses of Aluminum Nitride Ceramics Sintered at High-Pressure
Reactive Adsorption of Sulfur Compounds from FCC Gasoline on NiO/ -Al2O3
Structural Performance of Pultruded Composites under Elevated Temperatures
A New Process and Structure of Al2O3/LaPO4 Composites
Influence of Calcining Temperature on the Microstructure of LaPO4 Powders
Molten Salt Synthesis of LaPO4:Eu3+
Influence of Si Content on the Oxide Scale Formation of Ni-Based Alloy
Annealing Temperature Effect on Superelastic and Cyclic Response of NiTi SMA
3D Electromagnetic Simulation Study for the Distribution of Electromagnetic Field of Microwave Sintering Cavity
Microbiologically Influenced Corrosion of Fe3Al/ZrO2 Composites in Marine Environment
Study on the Formation and Variation of Monodisperse Nano-Sized Polystyrene Beads by Suspension Polymerization with Hydrophilic Polymer as a Stabilizer
Shape Memory Behavior of Ti-Rich Ti-Ni-Cu Melt-Spun Ribbons
Electroresponsive Property of Novel Poly(acrylate- acryloyloxyethyl trimethyl ammonium chloride)/Clay Nanocomposite Hydrogels
Positive Temperature Coefficient Behavior of HDPE/EVA Blends Filled with Carbon Black
Partical Size and Morphology of Zeolite Influenced by Various Conditions in the Hydrothermal Synthesis
Preparation and Properties of TiN Thin Films by D.C. Reactive Magnetron Sputtering
Evaluation of the Degree of Crystallization in Glass-Ceramics by Dielectric Constant Measurements
Large-Scale Synthesis of ZnO Nanorods by Different Surfactant-Assisted and Low-Temperature Process
「Nielsen BookData」 より