Chinese ceramics communications : selected, peer reviewed papers from the Sixth China International Conference on High-Performance Ceramics (CICC-6), Harbin, China, August 16-19, 2009

著者

• China International Conference on High-Performance Ceramics
• Pan, Wei
• Gong, Jianghong

書誌事項

Chinese ceramics communications : selected, peer reviewed papers from the Sixth China International Conference on High-Performance Ceramics (CICC-6), Harbin, China, August 16-19, 2009

edited by Wei Pan and Jianghong Gong

（Advanced materials research, v. 105-106）

Trans Tech Publications, c2010

注記

Includes bibliographical references and index

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This special volume presents the latest advances in the science and technology of high-performance ceramics in China. More than 600 valuable original contributions were sifted, using a strict peer-review process, to yield the more than 229 manuscripts included in this collection. The contributions covered almost all aspects of the field including: functional ceramics, structural ceramics, processing of ceramics and the evaluation of ceramics.

目次

Preface and Sponsors Changes in Microstructures and Properties of Al2O3/ZrO2 (Y2O3) with Different Content of ZrO2 Influences of SiO2 on Densification and Properties of Large Bulk Al2O3/ZrO2 (4Y) Eutectics Influence of Holding Time on the Properties of Alumina-Aluminium Titanate Fiber Investigation on Al2O3/YSZ Eutectic Ceramics Lining in the Pipes Prepared by Combustion Synthesis Preparation of Fe Coating Al2O3 Nanometer Composite Powder and its Mechanical Properties after Hot Press Sintering Sintering of High-Strength Dense Al2O3 Using Rod-Like Submicron Al2O3 as Sintering Aid Properties and Structure of Micro Porous Mullite-Corundum Refractory with High Strength Effects of Sintering Additives on the Microstructure and Mechanical Properties of Silicon Nitride Ceramics by GPS Fabrication of SiC/Ti3SiC2/TiC Ceramic Composites by Pressureless Sintering of 3TiC/2.2Si/0.2Al A Fracture Dynamics Model for Fiber Reinforced Ceramics Preparation and Characterization of Polycrystalline Cubic Boron Nitride (PcBN) Compacts by a Pressureless Sintering Process Effect of Sm2O3 Additives on the Rod-Like -Si3N4 Crystal of Porous Silicon Nitride Fabricated by Reaction-Bonded Morphology of In Situ VC Ceramics in High Speed Steel with High Vanadium Content Surface Microhardness and Flexural Strength of Colored Zirconia Preparation of Ti(C,N)-Based Cermets Size Dependent Stiffness of Composite Ceramic with Partial Debonding Interphase Mechanism Analysis of Synthesizing Fe-Si3N4 by Flash-Combusting FeSi75 Effect of Silicon Addition on the Properties and Microstructure of Corundum-Mullite Refractory Properties of Composite Ceramic Coatings on Ti-6Al-4V Alloy by Surface Nanocrystallization/Micro-Arc Oxidation Preparation and Characterization of SiC/MoSi2 Composites from Powder Resulting from a Mechanical-Assistant Combustion Synthesis Method Dynamic Mechanical Properties of CNTs/MoSi2 Composite Material Preparation and Properties of a New Ti3C2-Cu(Al) Cermet Series Preparation of Bulk Ti2AlC Using Ti3AlC2 Powders as a Starting Material Densifying Ti3AlC2/Cu Composites Using a Cold-Extruding and Temper Means Microstructure of Nanoceramic during Sintering and Preparation Mechanical Properties of Aerogel-Ceramic Fiber Composites Apparent Activation Energy in Low Temperature Aging of Y-TZP Ceramics Preparation and Mechanical Properties of HA/PHB Composites Application of ANN Back-Propagation for An Alloy Reinforced Ceramics/Metal Composite under Extra-Low Cycle Bending Fatigue Loading Surface Hardening of BN-Al Ceramic Composites Effects of Different Heat Treatment Temperatures on the Properties of Quartz Fibers Fabrication and Properties of Si3N4-SiC-C Refractory Composites Effects of Heat-Treatment Temperature on the Properties of Negative CTE Eucryptite Ceramics Mechanical Properties of Al-Si Alloy-Based Composites Reinforced by In Situ TiB2 Particulates Effect of In Situ TiC Particulate on the Wear Resistance of Spray-Deposited AZ91 Magnesium Matrix Composite High Temperature Oxidation Behavior of the B4C/BN Composites Dynamics of Crack Healing and its Molecular Dynamics Simulation of Al2O3-MgAlON Composite Numerical Simulation of Flow-Induced Corrosion in One-Strand Tundish Size Dependent Thermal Expansion Coefficient of Rod-Shaped Oxide Eutectic Ceramic Synthesis Nano-SiCp/MoSi2 Composites by In Situ Reaction Sintering and Low Temperature Oxidation Behavior Application of ANN Back-Propagation for Residual Stress in an Alloy Reinforced Ceramics/Metal Composite Thermal Fatigue Behavior of Ladle Purging Plug High Temperature Oxidation Behavior of ZrB2-SiC-Graphite Composite Heated by High Electric Current Oxidation Properties of ZrB2-20vol.%SiC-10vol.%BN Ceramic Composite at 1200 DegreesC High Temperature Ceramifying Behavior of SR/Al2O3 Composites Thermal Conductivity and Mechanical Property of Si3N4 Ceramics Sintered with CeF3/LaF3 Additives Wear Resistance of Nano-ZrO2 Ceramic for Hip Joint Head Prostheses Oxidation Behaviors of TiB2-TiCX and TiB2-TiCX/15SiC Ceramics Hot-Pressing Sintering Behavior and Properties of AlON/SiC Composites Fabrication and Superplastic Deformation of Al2O3/YSZ/MgAl2O4 Composite Ceramic Phase Formation Route of Cr2AlC Ceramics from Cr, Al and Graphite Powders Preparation and Properties of Ti5Si3 Matrix Composites Reinforced by Carbon Nanotube Ablation Resistant of Pressureless Sintered ZrB2-Based Ceramics Carbothermal Reduction Synthesis of Zirconium Diboride Powders Assisted by Microwave Fabrication of Layered-Ternary Ti3AlC2 Ceramics by High Energy Milling and Hot Pressing Sintering Mechanical Behaviors of Ultra-High Temperature Ceramics Solution-Based Synthesis of Ultra-Fine ZrB2 Powders and ZrB2-SiC Composite Powders Effect of B4C on the Mechanical Properties and Microstructure of ZrB2-SiC Based Ceramics High Temperature Properties of Ti3SiC2-SiC Composites Interfacial Microstructure and Strength of Vacuum Brazed Joints of Ternary Ceramics Ti3SiC2 A New Technique for Testing Abrasion Resistance of Refractories at Elevated Temperatures First-Principles Study of Optical Properties of Single-Wall Silicon Nanotubes Microwave Dielectric Properties of Ca1-x(Li1/2Sm1/2)xTiO3 Ceramics Sol-Gel Synthesis and Characterization of LaAlO3 Nanoparticles Using Gelatin as Organic Precursor Ferroelectric and Dielectric Properties of Vanadium-Doped Bismuth Layer Sr2Bi4Ti5O18 Ceramics Study on Ferroelectric and Dielectric Properties of Zr-Doped Sr2Bi4Ti5O18 Ceramics Structure and Dielectric Behavior of La-Doped BaTiO3 Ceramics Preparation of HfO2 Thin Film through Self-Assembled Monolayers on Si Substrate Ferroelectric Properties and Microstructures of Tb4O7-Doped Bi4Ti3O12 Thin Films Structure and Multiferroic Properties of Bi0.9Y0.1FeO3-PbTiO3 Ceramics BaTiO3 Functional Ceramics Thin Film Prepared by Self-Assembled Monolayers SrTiO3 Functional Ceramics Thin Film Prepared by Self-Assembled Monolayers with the Liquid Phase Deposition Method on Silicon Substrates Influence of Slight Bismuth Additive on the Properties of Calcium Copper Titanate Ceramic A Study on the Disk-Type Piezoelectric Transformer of Mg:LN Single Crystal Electrical Properties of Bismuth-Layered Structural CaxSr2-xBi4Ti5O18 Ceramics Co-Precipitation Synthesis of BiFeO3 Powders Synthesis and Characterization of BiFeO3 on OH-Functionalized Organic SAMs by Metalorganic Preparation and Microwave Absorbing Properties of Cu-Doped Ni-Zn Spinel Ferrites SrTiO3 Functional Ceramics Thin Film Prepared by Self-Assembled Monolayers with PTCS Substrate Functionalization Thick Film Metallization of AlN by Reactive Binders Synthesis and Identification of a Hyperbranched Polymer of Tris(8-hydroxyquinoline) Aluminum Linked with Ethylene Glycol Saturation Effect of Al(NO3)3 Dopant on Residual Voltages of ZnO Based Varistor Ceramics Synthesis of Pr6O11 Doped Zinc Varistors by High-Energy Milling Influences of Sintering Temperature on Microstructure and Electrical Properties of TiO2 Varistor Ceramics Influences of Donor Additives on Properties of TiO2-Based Varistor Effects of Sintering Temperature on Microstructure and Properties in TiO2 Varistor Ceramics Preparation of Sr2CeO4 Nano-Crystallites with a Sonochemical Process Preparation and Thermoelectric Properties of SiC Matrix Composites Prepared under a Low Sintering Temperature High-Temperature Thermoelectric Properties of Pb- and La-Substituted Bi2Sr2Co2Oy Misfit Compounds Preparation of PbTiO3-Based Conductive Ceramic Powders by Gaseous Penetration of Rare Earth Preparation and Characterization of Different Metal Modified BaTiO3 Powders Orientation Growth and Optical Properties of Sm2O3 Thin Films Effect of Deposition Voltage on the Composition, Morphology and Optical Properties of ZnS Thin Films Prepared by Cathodic Electrodeposition Influence of Preparation Parameter on the Grain Size of LaB6 Powder Synthesized by SHS with Reduction Process Preparation and Dielectric Properties of 1-3 La Modified PZT/IPN Piezoelectric Composites Preparation and Luminescent Properties of Green-Emitting La(BO3,PO4): Ce, Tb Preparation and Optical Properties of TiO2 Nanotube Arrays by Anodic Oxidation Method Preparation and Electrical-Conductive Property of SnO2-Based Ceramics NaAc Effect on the Anodization Formation of TiO2 Nanotube Arrays in Glycerol Based Electrolytes Investigation of the Reaction Time and the Process of Synthesis of GaN Nanopowders by Ammoniating Ga2O3 Microwave Absorption of BaLa0.5Fe11.5O19/SiO2 Nano-Powders Forming Mechanism of Dy2Ce2O7 Ceramic for Thermal Barrier Coatings Influence of Ca0.6Mg0.4Zr4(PO4)6 Coating on Alkali Corrosion Resistance of SiC Ceramic Finite Element Analysis on Cooling Process of SHS Reactive Flame Spray Surface Coating Structure and Dielectric Properties of (Gd0.4Sm0.5Yb0.1)2(Zr1-xCex)2O7 Ceramics Thermal Conductivity of Sm2Zr2O7-Carbon Nanotube Composite Preparation and Physical Properties of SrxLa1-xMgAl11O19-0.5x Fabrication of Multiple Oxidation-Resistant Coating on C/SiC Matrix Spraying Distance and Oxidation Resistance of Electrothermal Explosion Sprayed MoSi2-Based Coatings Structure and Properties of Ductile Iron Strengthened by Laser Surface Alloying Microstructure and Wear Resistance of TiC/Ni3Al Composites Made by Pressureless Melt Infiltration Processing Friction and Wear Characteristics of Laser-Clad Nano-Lubricating Coating Plasma Enhanced Microarc Oxidation on the Surface of Al-Cu-Mg Alloy Cr-Doped DLC Multilayered Thin Films Deposited Using Cathodic Vacuum Arc- and DC Magnetron-Assisted Ion Beam Sputtering Preparation and Characterization of Anti-Oxidation Coatings for Sliding Plates Wear-Resistant Properties of TiC/Fe Ceramic Composite Coating on Steel Plate via Combustion Synthesis Tribological Behavior of Polyimide/Zinc Oxide Hybrid Films Effects of Content of Al2O3 Particles and Heat Treatment on Corrosion Resistance of Ni-P-Al2O3 Composite Coatings Effect of Pulsed Substrate Bias on Evolution of Surface Morphology and sp3 Hybridization Degree of Ag-DLC Films in a Mid-Frequency Dual-Magnetron Sputtering Preparation and Property of Ceramic Matrix Coating of Anti-Oxidation for Stainless Steel at High Temperature by Slurry Method Influence of Target Current on the Structure of Ti-Doped DLC Films Microstructure and Erosion Behavior at Elevated Temperature of Thermal Sprayed Fe-Al/WC Coating Preparation of Y2O3-Al2O3-ZrO2 Nano-Ceramic Coatings on Metal Substrate by Sol-Gel Method Influence of Deposition Voltage on Microstructures of Yttrium Silicates Coatings by Hydrothermal Electrophoretic Deposition Preparation of Microsized Monodisperse Silica Spheres by Hydrolysis of Tetraethoxy Silane Influence of Solution pH Value on the Preparation of SrTiO3 Thin Films through Self-Assembly of Liquid Precursor Reaction Effects of Preparing Conditions on the Performances of Nano La(S,C)-TiO2 Films Characteristics of TiB2 Coating on the Surface of Copper Alloy Prepared by Vibrating Electrospark Deposition Photocatalysis and Hydrophilicity of Y3+ Doped TiO2 Thin Films ZrO2 Thin Films Prepared by Self-Assembled Method Microstructure and Properties of Interface High-Speed Steel Reinforced by In Situ VC /35CrMo Compound Roll Optimization of the Preparation Process of Nano-TiO2/Micro-Cu Composite Particles Fabrication of Fe-Based Al2O3-TiC Ceramic /Steel Composite by Self-Propagation High-Temperature Synthesis Ab Initio Study of Water Clusters Adsorption on Graphite Surface Characteristic of Microarc Oxidized Coatings on Titanium Alloy Formed in Electrolytes Containing Aluminate and ZrO2 Particles Structure and Property of Micro Arc Oxidation Ceramic Coatings on Al Alloy in K2ZrF6 Solution Interface and Wear Resistance of High Frequency Induction Remelted Ni-Based WC Coating Coating Evaluation Using Ultrasonic Wave Technology Enhancement in Bioactivity of Titanium Substrate with Composite Thin Films Effect of Pigmentation on Strength of Dental Y-TZP/Porcelain Bilayered Structure Effects of Veneering Porcelain Type on Bending Strength of Dental Y-TZP/Porcelain Bilayered Structure Bonding Strength Between Zirconia Core and Different Veneering Ceramics Synthesis of Calcium Metaphosphates Fine Powders by Chemical Precipitation Methods Influence of Different Ceric Oxide and Ferric Oxide Content on the Color of Alumina-Glass-Composites Restoration Mineralization of Magnetite Induced by Chitosan Hydrogel Behavior of hBMSC on Nano Hydroxyapatite Surface Influence of Background Color on the Chromatic Value of Four All-Ceramic System Core Materials Effects of Presintering Temperature and Heating Rate on the Physical and Mechanical Properties of Alumina-Glass-Composites Degradation Characteristic of Strontium-Containing Calcium Phosphate Cement In Vivo Preparation and Properties on Silk Fibers Reinforced Hydroxyapatite/Chitosan Composites Effect of Doped Traditional Chinese Medicine Drynariae Rhizoma on the Porcine Bone Hydroxyapatite and Chitosan Porous Scaffold Calcium and Phosphate Biocoatings on Magnesium Alloy Fabricated by Micro-Arc Oxidation Induction of Hydroxyapatite Particles Formation on PEGDA-Based Hydrogels by Nanobacteria Effect of Artificial Saliva with Fluoride Ions on the Color of Ti-Porcelain Remineralized Evaluation of Nano- Hydroxyapatite to Artificial Caries Influence of Y2O3 Additive on Transparent of ALON Ceramics Preparation of Aluminum Oxynitride Spinel -ALON Powders and Transparent Ceramics Thermoluminescence and Optical Stimulated Luminescence Studies of Sapphire Microwave Pyrolysis Chemical Vapor Infiltration of Carbon: Textural Changes Influence of Composition on the Characterization and Crystallization of Calcium-Magnesium-Silicate Glass-Ceramics Crystallization Behavior of a New Transparent Glass-Ceramics Preparation of Foam Glass Ceramics from Phosphorus Slag A Technique for the Preparation of Porous Ceramic Materials by Gelcasting Method Fabrication, Structure and Properties of Porous SiC Ceramics with High Porosity and High Strength Porous Silicon Nitride Microwave Transparent Material with Compounded Component Pore Former Preparation of Porous Hydroxyapatite-Zirconia Composite Scaffolds by Combination of Gel-Casting and Polymer Sponge Methods Effect of SiC on Microstructures and Properties of Clay Foam Ceramics Effect of Pore-Forming Processing on the Gas Permeability and Flexural Strength of Porous SiC Ceramics Adsorption of Ammonia from Aqueous Solution Using Zeolite-Attapulgite Nano-Pore Structure Ceramisite Properties of Ceramic Filter Material Made of Coal Fly Ash and its Application in Chromium(VI) Removal Effect of Tetraethoxysilane Infiltration on Properties of 2.5D Quartz Fibers Reinforced Silica Electrodeposition of Porous ZnO Electrodes in the Presence of Cetyltrimethylammonium Bromide Effect of Sintering Temperature on the Behavior of Oxygen Permeation for La0.6Sr0.4Co0.2Fe0.8O3- Tubular Membranes Proton Transport in Nafion117 Membranes by Molecular Dynamics Preparation of Ni/YSZ Anode Material Using Gel-Tape Casting and Performance Analysis Synthesis and Characterization of the Cathode Materials La0.7Sr0.15Ca0.15Co1-yFeyO3- for ITSOFC Preparation of Double-Perovskites Sr2Fe1-xScxMoO6- Powders for the Cathode of SOEC by Sol-Gel Citrate Method Preparation and Characterization of ZrO2 Nanopowders for Solid Oxide Fuel Cells Synthesis and Electrochemical Properties of 0.5Li2MnO3*0.5LiMn0.5Ni0.5O2 Synthesis of the Layered-Spinel Intergrowth Structure Cathode Materials by Co-Precipitation Method Fabrication of Graded WC-Co Cemented Carbides by a Lamination Method Effects of Sol Viscosity on Properties of BST Thin Films Prepared by Sol-Gel Method Orthogonal Experiment of Glass-Alumina Functionally Gradient Materials Produced with Rapid Prototyping Fracture Dynamics of a Mode III Moving Crack Impacted by Elastic Wave in Functionally Graded Materials Low Temperature Solid Oxide Fuel Cells with SDC-Carbonate Electrolytes An Improved Two-Phase Flow and Transport Model for the PEM Fuel Cell Fabrication and Characterization of Large Size Anode Substrate of Solid Oxide Full Cell Oxygen Reduction Reaction of PEMFC Cathode by Molecular Simulations Conversion of Natural Gas to Hydrogen under Super Adiabatic Rich Combustion Structure, Magnetic Properties and Defects Distribution of Mn0.5Zn0.5LaxFe2-xO4 Nanocrystals A Novel Biomass Gasifier for Producing Tar-Free and Hydrogen-Rich Syngas Optimal Selection of Several Substrates in Fermentative Biohydrogen Production Technology Hot Press Sintering Behavior of Nano-Sized AlN Powders Influence of the Reinforcement's Number on the Mechanical Properties of the Reinforced Concrete Beam Grain-Size Characteristics of Mullite Nanocomposites Prepared by Open-System Hydrothermal Crystallization Method Synthesis of Ti3SiC2 Machinable Ceramics by High-Energy Milling and Hot-Pressing A New Method of Producing High Purity 4A-Molecular Sieve from High Modulus Sodium Silicate Liquor Purified by Carbonization Changes of Two Phase Composition in Phase Separation Process of Na2O-CaO-Al2O3-B2O3-SiO2-TiO2 System Application of DSC Technique in Study of Glass Ceramic Nitrogen-Doped Nano-TiO2 Ceramic Film: Fabrication and Application to Photocatalysis Crystallization Kinetics of Li+-Doped TiO2 Films Prepared by Sol-Gel Dip Coating Effects of Starting Carbon Sources on the Carbothermal Synthesis of SiC Powders Experimental Study on Stainless Steel Slag Used in Ceramic Making Preparation of Nanometer Mullite via Supercritical CO2 Effect of Carbon as Foaming Agent on Pore Structure of Foam Glass Synthesis of MgAlON-Bonded MgO Refractory Effect of Nucleating Agents on Crystallization Glass Ceramics Produced from Nickel Slag Preparation of Rutile Crystalline Glaze Preparation of Integrated Ceramic Armor for Body Bulletproof by Semi-Aqueous Gel-Casting Effect of Phase Separation Structure on the Crystallization Property of Blast Furnace Slag Synthesis of Aluminum Oxynitride Powder by Carbothermal Reduction Method Preparation of the Barium Strontium Titanate/Magnesium Oxide Plates by Non-Aqueous Gel-Casting Using Monte Carlo Simulation to Improve Ceramic R&D Investment Decisions Synthesis of Cordierite with Low Thermal Expansion Coefficient Preparation of High-Purity Alumina by Hydrolyzing High-Purity Metal Aluminum Effect of Sodium Dodecylbenzenesulfonate on Dispersion of SiO2 Nano-Powder in Aqueous System Preparation of Ternary Rare Earth Sulfide LnxGd2-xS3 (Ln: La, Tb) Preparation and Photocatalytic Properties of Fe-Doped TiO2 Nanocrystalline Composite Particles Nanometer SrTiO3-Supported Ni-Based Catalyst in the Reaction of CO2 Reforming CH4 to Syngas Simulation of Temperature Distribution during Ceramic Sintering Based on BP Neural Network Technology Luminescence Properties of (MxMg1-x)2SiO4:Dy3+, Eu3+ (M=Ca, Sr, Ba) -Al2O3 Flake Pink Powder Synthesized by Molten Salt Method Shear Thinning and Thickening of Alumina Suspensions Synthesis and Photocatalytic Performance of Novel Visible-Light-Driven Bi2WO6 Photocatalyst via a Reverse Microemulsion Process Hydrothermal Synthesis of Xonotlite Fibers and Investigation on their Thermal Property Elongated Grain Growth Mechanism of Alumina Ceramics with Additives Phase Analysis of Forsterite in Carbothermal Reduction Processing Super Thermal Insulating SiO2 Cryogels Prepared by Vacuum Freeze Drying Microstructure and Properties of Graphite Embedded SiC Composite by Coating Method

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB02537242
• ISBN:
  • 9780878492756
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zurich
• ページ数/冊数: xviii, 870 p.
• 大きさ: 25 cm
• 分類:
  • DC22 : 620.14
• 件名:
  • LCSH : Ceramics -- Congresses
  • FREE : High performance ceramics
  • FREE : CICC
• 親書誌ID:
  • BA24926058