Advances in materials science for eEnvironmental and nuclear technology
Author(s)
Bibliographic Information
Advances in materials science for eEnvironmental and nuclear technology
（Ceramic transactions, v. 222,
John Wiley & Sons , American Ceramic Society, c2010-c2011
- [I]
- II
Available at / 3 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bigliographical references and index
"The Materials Science and Technology 2009 Conference and Exhibition (MS&T'09) was held October 25-29, 2009 in Pittsburgh, Pennsylvania."--[I] pre.
"The Materials Science and Technology 2010 Conference and Exhibition (MS&T'10) was held October 17-21, 2010, in Houston, Texas."--II pre.
Editors of [I]: Kevin Fox, Elizabeth Hoffman, Navin Manjooran, Gary Pickrell
Editors of II: S.K. Sundaram, Tatsuki Ohji, Kevin Fox, Elizabeth Hoffman
Description and Table of Contents
- Volume
-
[I] ISBN 9780470927298
Description
The Materials Science and Technology 2009 Conference and Exhibition (MS&T'09) was held October 25-29, 2009, in Pittsburgh, Pennsylvania. A major theme of the conference was Environmental and Energy Issues. Papers from three of the symposia held under that theme are included in this volume. These symposia include Materials Solutions for the Nuclear Renaissance; Green Engineering and Environmental Stewardship; and Nanotechnology for Energy. These symposia included a variety of presentations with sessions focused on sustainable energy, photovoltaics, nanowires and composites, energy harvesting, catalysts, thin films, corrosion, nuclear fuels, materials in aggressive environments, glass and ceramics for waste disposition, modeling and thermal properties, and education. Also included was a series of invited presentations and an international panel discussion on cement waste forms. The Green Engineering and Environmental Stewardship symposium was sponsored by the Nuclear and Environmental Technology Division (NETD) of The American Ceramic Society while the Materials Solutions for the Nuclear Renaissance symposium was sponsored by NETD and ASM International.
Table of Contents
Preface. MATERIALS SOLUTIONS FOR THE NUCLEAR RENAISSANCE.
Irradiation Effects in Ceramics for Plutonium Disposition (C. Davoisne, W. E. Lee, M. C. Stennett, N. C. Hyatt, N. Peng, and C. Jeynes).
Synthesis and Structures of Gd2 (Zr2-xCex)O7: A Model Ceramic System for Plutonium Disposition (D. P. Reid, M. C. Stennett, and N. C. Hyatt).
Waste Form Development for SRS MOX Plant Effluent (Erich Hansen, Timothy Jones, Tommy Edwards, and Alex Cozzi).
Flammable Gasses in the Saltstone Process Flowsheet (A. D. Cozzi).
Development of Crystal-Tolerant Waste Glasses (J. Matyas, J. D. Vienna, A. Kimura, M. Schaible, and R. M. Tate).
Phase Stability of Defense Waste Processing Facility (DWPF) Type High Level Nuclear Waste Glasses (Amanda L. Billings, Carol M. Jantzen, Connie C. Herman, and Sharon L. Marra).
Alkali/Akaline-Earth Content Effects on Properties of High-Alumina Nuclear Waste Glasses (J. S. McCloy, C. Rodriguez, C. Windisch, C. Leslie, M. J. Schweiger, B. R. Riley, and J. D. Vienna).
Nepheline Crystallization in Nuclear Waste Glasses (Kevin M. Fox, David K. Peeler, and Thomas B. Edwards).
Cold Crucible Vitrification of SRS SB4 HLW Surrogate at High Waste Loadings (A. P. Kobelev, S. V. Stefanovsky, V. V. Lebedev, D. Y. Suntsov, M. A. Polkanov, O. A. Knyazev, and J. C. Marra).
An Extraction of Platinum Group Metals and Molybdenum from Molten Borosilicate Glass Using Cu and Cu5Si (Kazuyoshi Uruga).
Microstructure of Laser-Melted Zirconium Carbide Ceramics (H. F. Jackson, D. D. Jayaseelan, W. J. Clegg, M. J. Reece, F. Inam, D. Manara, C. Perinetti Casoni, and W. E. Lee).
On the Mechanism of Radiation Damage in Zircon by High-Energy Electrons (N. Jiang).
Anelasticity in Austenitic Steels (Ashwin Rao, P. John Bouchard, and Michael E. Fitzpatrick).
Molten Salts for Nuclear Cogeneration (Luke Olson, James Ambrosek, Guoping Cao, Kumar Sridharan, Mark Anderson, and Todd Allen).
GREEN ENGINEERING AND ENVIRONMENTAL STEWARDSHIP.
Development of Low-Cost Functional Geopolymeric Materials (Mazen Alshaaer, Faten Slaty, Hani Khoury, Hubert Rahier, and Jan Wastiels).
Green Technology for Extraction of Iron from Ores and Other Materials (Allen W. Apblett and Kevin Barber).
Nanotechnology for Uranium Separations and Immobilization (Kevin Barber, Allen W. Apblett, Sulaiman Al-Fadul, Alan Piquette, and Mohamed Chehbouni).
How the Classic Materials Science Stool is being Changed by the Sustainability Stool (Marsha S. Bischel and Amy A. Costello).
Impact of Materials Selection on the Sustainability of Wind Energy (Davion M. Hill and Narasi Sridhar).
Precipitation Behavior of Chromium in Chromium(IH)-Bearing Slag (Xingrong Wu, Liaosha Li, Ping Wang, Zhaojin Wu, and Yuanchi Dong).
Improved Energy Efficiency and Environmental Benefits for Calcium Treatment in Steel (James Yanker and David Dudek).
NANOTECHNOLOGY FOR ENERGY.
Optical Characterization of Chemically Deposited SbCuS Thin Films (Chinedu Ekuma, Mishack Nnabuchi, Nwabueze Aja, and Israel Owate).
Examining Defects in Solid Core 2-D Photonic Band-Gap Fibers with High Index Inclusions (Neal T. Pfeiffenberger and Gary R. Pickrell).
Nanophased Materials in Supercritical CO2: Ceramic Nanopowder Synthesis, Encapsulation and Deposition (J. C. Ruiz, F. Charton, S. Sarrade, A. Hertz, B. Fournel, A. Julbe, and C. Guizard).
Influence of Gas Flow Rate on the Formation of ZnO Nanorods and Their Effects on Photoelectrochemical Response (Sudhakar Shet, Kwang-Soon Ahn, Ravindra Nuggehalli, Yanfa Yan, Todd Deutsch, John Turner, and Mowafak Al-Jassim).
Nanocoating Enhanced Optical Fiber Sensors (M. Smietana, W. J. Bock, J. Szmidt, and G. R. Pickrell).
Surface Plasmon Resonant Enhanced Optical Transmission through ZnO/Ag/ZnO Multilayered Films (Pangpang Wang, Dongyan Zhang, Chang Huang, Xiaoping Song, and Ri-ichi Murakami).
Controlled Shape Synthesis of BaTiO3-(Mn0.5Zn0.5)Fe2O4 Nanocomposites (Yaodong Yang, Wenwei Ge, Shashank Priya, Yu U. Wang, Jie-Fang Li, and D. Viehland).
Author Index.
- Volume
-
II ISBN 9781118060001
Description
This book contains 29 papers from the Clean Energy: Fuel Cells, Batteries, Renewables; Green Technologies for Materials Manufacturing and Processing II; and Materials Solutions for the Nuclear Renaissance symposia held during the 2010 Materials Science and Technology (MS&T'10) meeting, October 17-21, 2010, Houston, Texas. Topics include Batteries; Corrosion and Materials Degradation; Fuel Cells & Electrochemistry; Fossil Energy Materials; Solar Energy; Waste Minimization; Green Manufacturing and Materials Processing; Immobilization of Nuclear Wastes; Irradiation and Corrosion Effects; and Materials Performance in Extreme Environments.
Table of Contents
Preface ix CLEAN ENERGY: MATERIALS, PROCESSING, AND MANUFACTURING.
Slag Characterization for the Development of New and Improved Service Life Materials in Gasifiers using Flexible Carbon Feedstock 3
James Bennett, Seetharaman Sridhar, Jinichiro Nakano, Kyei-Sing Kwong, Tom Lam, Tetsuya Kaneko, Laura Fernandez, Piyamanee Komolwit, Hugh Thomas, and Rick Krabbe
Characterization of Electrochemical Cycling Induced Graphite Electrode Damage in Lithium-Ion Cells 17
Sandeep Bhattacharya, A. Reza Riahi, and Ahmet T. Alpas
Titanium-Dioxide-Coated Silica Microspheres for High-Efficiency Dye-Sensitized Solar Cell 27
Devender and Ajay Dangi
Effect of Titanium and Iron Additions on the Transport Properties of Manganese Cobalt Spinel Oxide 33
Jeffrey W. Fergus, Kangli Wang, and Yingjia Liu
Effect of Hydrogen on Bending Fatigue Life for Materials used in Hydrogen Containment Systems 39
Patrick Ferro
Investigation of Secondary Phases Formation Due to PH3 Interaction with SOFC Anode 51
Huang Guo, Gulfam Iqbal, and Bruce Kang
PEN Structure Thermal Stress Analysis for Planar-SOFC Configurations under Practical Temperature Field 61
Gulfam Iqbal, Suryanarayana Raju Pakalapati, Francisco Elizalde-Blancas, Huang Guo, Ismail Celik, and Bruce Kang
Electroless Coating of Nickel on Electrospun 8YSZ Nanofibers 69
Luping Li, Peigen Zhang, and S.M. Guo
Effect of Surface Condition on Spallation Behavior of Oxide Scale on SS 441 Substrate used in SOFC 81
Wenning Liu, Xin Sun, Elizabeth Stephens, and Moe Khaleel
Effect of Fuel Impurity on Structural Integrity of Ni-YSZ Anode of SOFCs 87
Wenning Liu, Xin Sun, Olga Marina, Larry Pederson, and Moe Khaleel
Strategies to Improve the Reliability of Anode-Supported Solid Oxide Fuel Cells with Respect to Anode Reoxidation 101
Manuel Ettler, Norbert H. Menzler, Georg Mauer, Frank Tietz, Hans Peter Buchkremer, and Detlev Stoever
Mixed Composite Membranes for Low Temperature Fuel Cell Applications 111
Uma Thanganathan
Carbonate Fuel Cell Materials and Endurance Results 119
C. Yuh, A. Hilmi, G. Xu, L. Chen, A. Franco, and M. Farooque
MATERIALS SOLUTIONS FOR THE NUCLEAR RENAISSANCE.
Characterization of Core Sample Collected from the Saltstone Disposal Facility 135
A.D. Cozzi and A.J. Duncan
Incorporation of Mono Sodium Titanate and Crystalline Silicotitanate Feeds in High Level Nuclear Waste Glass 149
K. M. Fox, F. C. Johnson, and T. B. Edwards
Radiation Resistance of Nanocrystalline Silicon Carbide 161
Laura Jamison, Peng Xu, Kumar Sridharan, and Todd Allen
Performance of a Carbon Steel Container in a Canadian Used Nuclear Fuel Deep Geological Repository 169
Gloria M. Kwong, Steve Wang, and Roger C. Newman
Development of Ceramic Waste Forms for an Advanced Nuclear Fuel Cycle 183
A. L. Billings, K. S. Brinkman, K. M. Fox and J. C. Marra, M. Tang, and K. E. Sickafus
Determination of Stokes Shape Factor for Single Particles and Agglomerates 195
J. Matyaa, M. Schaible, and J. D. Vienna
Glassy and Glass Composite Nuclear Wasteforms 203
Michael I. Ojovan and William E. Lee
Advances In Materials Corrosion Research in the Yucca Mountain Project 217
Raul B. Rebak
Creep Studies of Modified 9Cr-1 Mo Steel for Very High Temperature Reactor Pressure Vessel Applications 231
Triratna Shrestha, Mehdi Basirat, Indrajit Charit, Gabriel Potirniche, and Karl Rink
Developing the Plutonium Disposition Option: Ceramic Processing Concerns 241
Jonathan Squire, Ewan R. Maddrell, Neil C Hyatt, and Martin C. Stennett
Pore Structure Analysis of Nuclear Graphites IG-110 and NBG-18 251
G. Q. Zheng, P. Xu, K. Sridharan, and T. R. Allen
GREEN TECHNOLOGIES FOR MATERIALS MANUFACTURING AND PROCESSING.
Modified Powder Processing as a Green Method for Ferrite Synthesis 263
Audrey Vecoven and Allen W. Apblett
Novel Method for Waste Analysis using a Highly Luminescent (II) Octaphosphite Complex as a Heavy Metal Detector 279
NisaT. Satumtira, AN Mahdy, Mohamed Chehbouni, Oussama ElBjeirami, and Mohammad A. Omary
Geopolymer Products from Jordan for Sustainability of the Environment 289
Hani Khoury, Yousif Abu Salhah, Islam AI Dabsheh, Faten Slaty, Mazen Alshaaer, Hubert Rahier, Muayad Esaifan, and Jan Wastiels
Leaching of Calcium Ion (Ca2+) from Calcium Silicate 301
Vandana Mehrotra
Green Energy and Green Materials Production Activity and Related Patents 313
J. A. Sekhar, M. C. Connelly, and J. D. Dismukes
Micro Patterning of Dielectric Materials by using Stereo-Lithography as Green Process 329
Soshu Kirihara, Naoki Komori, Toshiki Niki, and Masaru Kaneko
Author Index 337
by "Nielsen BookData"
