Materials and product technologies : selected, peer reviewed papers from the 2nd International Conference on Advances in Product Development and Reliability, July 28-30, 2010, Shenyang, China (PDR'2010)
著者
書誌事項
Materials and product technologies : selected, peer reviewed papers from the 2nd International Conference on Advances in Product Development and Reliability, July 28-30, 2010, Shenyang, China (PDR'2010)
（Advanced materials research, v. 118-120）
Trans Tech Publications, c2010
- : pbk.
大学図書館所蔵 全1件
注記
Includes bibliographic references and index
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This three-volume set is a collection of 190 peer-reviewed papers on the topic of Advances in Product Development and Reliability. It addresses the scientific and technological issues underlying improvements in performance, reliability and lifetime. Its remit embraces the design and manufacturing aspects of product development and reliability, as well as operational life prediction and extension.
目次
Committees and Preface
Full-Field Modelling of Crack Tip Shielding via the 'Plastic Inclusion' Concept
Design for Lifecycle Cost and Preventive Maintenance Using Time-Dependent Reliability
Fatigue Reliability Analysis Including Super Long Life Regime
Distribution of Fatigue Lives for the Diecast Magnesium Alloy
Crack Propagation of CCT Foam Specimen under Impact Fatigue
A Mixed-Effect Multi-Failure-Mechanism Fatigue Reliability Model
The Fracture and Fatigue Behaviour of Nano-Modified SAN
Finite Element Analysis of a Compressor Disk
Experimental Observations of Dominant Effective Short Fatigue Crack Behavior for Railway LZ50 Axle Steel
Scale-Induced Effects on Fatigue Properties of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames
Bending Ratcheting Tests of Z2CND18.12 Stainless Steel
Deformation Analysis for Welding Assembly Processes of Automobile Panels
Surface Rolling Effect on Effective Short Fatigue Cracks Density for Railway LZ50 Axle Steel
Damage Modes and Strength Reliability Strategies of Railway Wheel Set
Mechanical and Physical Characters of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames
Cyclic Deformation Characters and Description of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames
Measurement on Fracture Roughness Values of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames
Modeling to the Fatigue Crack Growth Rates of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames
Measurement on Fatigue Cracking Thresholds of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames
3D Visual Parametric Reliability Design System Development of Flange Based on ProEngineer
Fatigue Limit Measurement of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames
Anti-Ratcheting Design Software for Primary Auxiliary Pipeline in Nuclear Power Plant
Ratcheting Boundary Analysis of Straight and Elbow Piping
Corrosion Fatigue of Aircraft Aluminum Alloy Structure in the Coastal Environment and Improvements
The Integrated Application Based on Order Moment Method and Improved Monte-Carlo Method in Mechanical Reliability Simulation
Load Transfer Analysis of Cracked Bolted Joints
Study on Rolling Contact Behaviors of Three Kinds of Railway Wheel Treads
Life Prediction of High Temperature Welded Component by Skeletal Point Rupture Stress
Studies on Fatigue Properties of Steel with Co-Based Alloy Hardfacing Coating
Thermo-Mechanical Fatigue Behavior Investigation and Fracture Analysis on Austenitic Stainless Steel of Surge Line in Nuclear Power Plant
Study on Dynamics Mechanics of Generation for Rail Oblique Crack
The Safety Study on Corrosion Damage of LC4 Aluminum Alloys by Finite Element Method
Fatigue S-N Relations of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames
Determination of the Expansion Parameters for the Combined Welding and Expanding Connection of Tube-to-Tubesheet
Fatigue Life Prediction of Spot-Welded Structure under Different Finite Element Models of Spot-Weld
Numerical Simulation and Experimental Research on Fatigue Strength of the Injector Guide Pillar under Complex Loads
Reliability Analysis of Interval Parameters Bar Structures with Affine Arithmetic
Investigation of the Hydrogen Embrittlement on the 65Mn Steel from the Nuclear Power Plant with Small Punch Method
Reliability Analysis Methods for Mixed Uncertainties in Structural System with Multiple Modes
Acoustic Emission Analysis of Composite Laminates under Low Velocity Impact
Predicting Fatigue Life of Pre-Corroded LC4 Aluminum Alloy by Artificial Neural Network
A Study on Low-Velocity Impact Characteristics and Compression Strength after Impact of Ceramic/Resin Matrix Composites
Experimental Study of the Electrical Potential Technique for Crack Monitoring of LY12-CZ Plate Specimen
Discussion of Reliability Analysis for Aircraft Wing Box Structural System
Progressive Damage Approach to Simulating Low Velocity Impact Response of Plain Weave C/SiC Composites
Mechanical System Design of Large Span Retractable Roof
Infrared Thermography and Acoustic Emission in 2D Plain Woven C/Sic Composites under Tensile-Tensile Fatigue Loading
Validity Evaluation of AE Technique on Damage Monitoring of Different Woven C/SiC Composites under Mechanical Loading
The Strength Analysis of Tower Vacuum Dryer Structural
Research on Remote Data Acquisition System Reliability Simulation
Modified Analytical Method for Stress Intensity Factor Calculation of Infinite MSD Plate Containing Multiple Holes
The Mechanism Design of the Upper Air Crawling Robot
Fatigue Crack Growth Rate of 16mnr Steel with Effect of Stress Ratio
Review of Multiaxial Fatigue Life Prediction Technology under Complex Loading
On The Fatigue Short Crack Behaviors of Directionally Solidified Superalloy DZ4 by In Situ SEM Observations
Contacting Model Considerations of Interference Fit for Shaft-Hub System
An Approach of Robust Reliability Design for Structure System with Multiple Failure Modes
Optimization of Exponential Distribution Testing Period Based on Reliability Degradation
Effect of Type-II and Type-III PMs on Operational Reliability of Buses
A Theoretical Note on Mode I Crack Kinking and Branching
Reliability Modeling for Symmetric Structure Systems Based on Copulas
Research of Modern Railway Vehicle Structure Fatigue Design Method Based on Multibody Dynamic Simulation
Prediction of Hardenability of Gear Steel Using Stepwise Polynomial Regression and Artificial Neural Network
The Effect of Random Spectrum on the Fatigue Life of Hybrid Metal Matrix Composites
Availability Research on K-out-of-N: G Systems with Repair Time Omission
Dynamic Model of Common Cause Failure Based on Shocks
Reliability Analysis of Shiplift Gear Based on System-Level Load-Strength Interference Model
Optimizing of Turning Parameters Using Multi-Objective Genetic Algorithm
Bifurcation of Non-Semi-Simple Zero Eigenvalues at the Critical Point of the Statical Bifurcation of Nonlinear Rotor System
A Novel Variable Neighborhood Genetic Algorithm for Multi-Objective Flexible Job-Shop Scheduling Problems
Failure Rate Analysis and Model Consisting of Four Elements for Components
Hybrid Genetic Algorithm with Simulated Annealing Based on Best-Fit Strategy for Rectangular Packing Problem
The Application of MARS on Crashworthiness Improvement
Design of Double-Deck Isolation Systems
Bearing Parameter Optimization of a Compressor Rotor System Based on Orthogonal Experimental Design
An Approach Based on Enhanced Collaborative Optimization and Kriging Approximation in Multidisciplinary Design Optimization
Planning of Step-Stress Accelerated Degradation Test with Stress Optimization
General Particle Swarm Optimization Algorithm for Integration of Process Planning and Scheduling
Theoretical Research and Experiment of Vibration Friction on Vibratory Compaction Experiment System
Challenges in Reliability Assessment for Electronics
Reliability Analysis of Structure with Local Sunken Plate
Nonlinear Analysis on Rigidly Attached Structure of the Luffing Jib Tower Crane
Residual Stress Analysis in Curing Process of COG Module
Aging Change Point of Lognormal Distribution and its Implications
Lifetime Prediction of Product Based on Proportional Hazards-Proportional Odds Model in Accelerated Life Testing
Failure of Flip-Chip Circuit Interconnects under High Current Density
Automobile Modeling Evaluations Based on Electrophysiology
Development and Application of Vehicle Health Index
Failure Analysis and Reliability Evaluation of a Planetary Gear Box
The Effects of One Sided Gold Finish on the Reliability of Electrical Contacts under Fretting Conditions
Residual Strength Degradation Model for Low-Alloy Steel in High Cycle Fatigue Load
Study on Reliability of the Tower Crane Jib
Anti-Seismic Reliability Analysis of Quayside Container Crane
Fatigue Life Reliability Analysis of Belt Conveyor Driving Drums Based on FEM
Finite Element Analysis of Sieve Box Structure in Fluidized Bed
Reliability Analysis for Crane Boom Base on Probabilistic Finite Element Method
The Dynamic Optimization Analysis of High-Speed Hybrid Thrust Bearing
Finite Element Analysis on Flexible Attachments of Luffing Jib Tower Crane
Tolerance Design for Four-Bar Function Generating Mechanisms with Joint Clearances Using Taguchi Method
Statistical Evaluation on Cumulative Damage Property of Aluminum Alloy Welded Joint under Multi-Stage Loading
Probabilistic Fatigue Property of Aluminium Alloy Welded Joint for High-Speed Train
Reliability Analysis Based on Transverse Distribution of Random Loading
Research on Mechanical Reliability Growth Model for Complete Failure Data
Grey Model Based Particle Swarm Optimization Algorithm for Anticorrosion Reliability Design of Underground Pipelines
Kinematic Reliability and Sensitivity Analysis of Delta Parallel Mechanism
Research Progress on Fracture Mechanism of Mechanical Products
Study on the Control System of an Automatic Testing Equipment for Diffusion Vacuum Pumps by Fault Tree Analysis
SPN Based Reliability Analysis in the Process Industry
The Development of Reliability Modeling and Analysis Tool Based on Stochastic Petri Nets
Research of Accelerated Reliability Test on Server
Research on the Six-Dimension Knowledge Classification System and Model for Modern Product Design
Diffuse Response Surface Methodology to Reliable Optimization of Numerical Control Milling
Optimization of Preventive Maintenance Policies for Aging Equipments in Finite Time Horizon
The Determine Method of Maintenance Strategy for Multi-State System
Research on Spurious Trip of 1oo2 Safety Instruments of Petrochemical Installation with Repair Considered
Estimation of Failure Probability and its Applications in Reliability Data Analysis
Step-Stress Accelerated Random Vibration Life Testing
Effects of Thermal Exposure on Low Cycle Fatigue Behavior of Ti600 Titanium Alloy
Life Prediction of Constant-Stress Accelerated Degradation Testing Using Time Series Method and Grey Theory
Modeling for Time-Variant Reliability of Mechanism
The Current Status of Process Planning for Multi-Material Rapid Prototyping Fabrication
Fatigue Life Evaluation of Unstiffined Aluminum Panels with Multiple Site Damage
Coupling Analysis of Heat Transfer in Finned Radiator Based on Numerical Simulation Codes ABAQUS and FLUENT
Simulation of Position Control and Flow Rate Match of Integrated Hydraulic Actuator Unit
A Hybrid Method for Determining the Dynamic Stresses of Railway Vehicle
On the Design Approach of Double-Tubesheets
Model and Simulation of Fluid Hydrodynamic Pressure at the Cutting Zone Considering the Surface Roughness
Cargo Ride Safety Analysis of Trucks for Four Excitation Cases
Design of an Oblique Tool for the Nano Removal Process
Design of a Biped Toy Robot with an Automatic Center of Gravity Shifting Mechanism
Function-Oriented Design and Verification of Point-Contact Tooth Surfaces of Spiral Bevel and Hypoid Gears with the Generated Gear
Wear Life Prediction Model on 38CrMoAlA Alloy Steel
Shear Strength and Performance of Glass-to-Metal Brazed Joints
Twice-Modeling Approach for Concurrent Process Planning without Forced Decoupling
Perception of Constraints in Conceptual Design within the Automotive Industry
Research on Vibration Test Method of the Whole NC Machine Tool
A Linear Goal Programming Model for Weight Calculation in Fuzzy AHP and its Application in Product Development
Heterogeneous Knowledge Integrated Management Based on Topic Maps in Collaborative Product Development
Support Activity Flow Based Forecast Model for the Quantity of the Aircraft's Support Equipments during Design and Development Phase
Lateral Stability Control Design for Tractor Semitrailer Based on Virtual Prototyping
Study on Semi-Active Control for Leaf Spring Suspension Based on Virtual Prototyping
Finite Element Analysis on the Ability of Solder Joints to Resist Thermal Fatigue
Reliability Analysis of Kinematic Accuracy of a Three Degree-of-Freedom Parallel Manipulator
A Quantitative Method on Formative Elements Optimization of Car Styling Design
Analysis of Thermal Properties of Super-High Speed Hybrid Journal Bearing Based on ANSYS
Methods for Device Applications Debugging
Development of a Surface Defect Inspection System for Cold Rolled Strip Based on Bright-Dark Filed Mode
The Development of the Sustainable Manufacturing Processes
Combinatorial Synthesis and Characterization of Thermoelectric Composition-Spread (La1-xCax)VO3 (0 x 1) Films
Combinatorial Pulsed Laser Deposition and Thermoelectricity of (Ca1-xAx)3Co4O9 (A: Sr, Ba) Composition-Spread Films
The Research on Bei Jia Zi of Tujia Minority and its Influence on Modern Product Design
Product Sustainability and Realization
Modern Product Design Platform in Distributed Resource Environment
Product Development Process Integration Using Design Structure Matrix
Comprehensive Evaluation for Generalized Product Quality Based on Fuzzy Entropy
An Extended Monte Carlo Method on Simulating the Development Cost Uncertainties of Aircraft
Visualized Analysis and Simulation Research on Dynamic Performance of the Whole NC Machine Tool
Fatigue Life Prediction of Spring Buffer in GCD-1500 Cable Drill
Research on Web-Based Virtual Grinding Machine Tool
Feasible Solution of Profile-Shift Coefficient for Involute Internal Gear Pair in Zero-Tooth-Difference Mechanism
An Principle and Technology of On-Machine Measurement for Large Gear Hopping
The Influence of Following Error of Servo System on Machining Precision for NC Machine Tool
Design of the Inner Helicoids of Screw Motor Stator's Steel Casing and Studying of NC Manufacturing Technology
Study on the Influence of Rolling Technology on the Broadside Feature of Laser Tailor-Welded Blanks with Long Weld Seam
Computational Analysis of Condensed Vaporized Alloying Elements of 5456 Aluminum Alloy
The Optimal Maintenance Period for Repairable Product after Warranty Expiration under Renewing Warranty
A Method of Quality Control for Networked Collaborative Product Development
Analysis of Hydraulic Lifting System and Design of Cylinder for the New 450t Schnabel Car
Vibration Effects on Tailstock of a Turning Machine
Mean Square Error Criteria to Multiple Quality Characteristics Robust Design by the Weighted Tchebycheff Method
Theoretical and Experimental Studies of Statistical Evaluation Method for Flatness Error
GSPN Based Reliability Design for Intellectualized System
A Series of New Nonlinear Dynamic Equations of Rolling Element Bearing Systems
Study on Lateral Stiffness for Flexicoil Circle Springs with Rubber Pads
The Integrated Performability Analysis Architecture of the Computer Networks
Analysis of Dynamic Behavior of a Large-Sized Vibration Fluidized Bed
Research on Optimization Model Based on House of Quality Fuzzy Theory in Industrial Environment
Numerical Simulation Analysis of Fluid in the Semi-State within the Desulphurization Tower
Transverse Vibration Analysis of Euler-Bernoulli Beams Carrying Concentrated Masses with Rotatory Inertia at Both Ends
Dynamic Design Method for Magnesium Alloys Wheel of New Energy Vehicles
Multiphase Flow Simulation and the Analysis Method of the Pressure Drop in the Vibrated Fluidized Bed
Influence Factors Analysis of Hammer Head and Screen Plate Life of CFB Coal Crusher
Research and Application on Product Data Management Technology
Very High Cycle Fatigue Behavior and Thermographic Analysis of High Strength Steel
Spares Utilization Calculation Method Based on Maintenance Support Activity
Product Data Integration and Management Research Based on XML
Transient Process Response Analysis of Forced Synchronous Elliptical Vibrating Screen
Novel Approach to Ship Multidisciplinary Design and Optimization Using Genetic Algorithm and Response Surface Method
Modal Analysis on the Truss Structures of Machine Tool
A Conceptual Design Approach Generated by Integrating AD and TRIZ into the Conceptual Design Phase of SAPB
「Nielsen BookData」 より