Materials and product technologies : selected, peer reviewed papers from the 2nd International Conference on Advances in Product Development and Reliability, July 28-30, 2010, Shenyang, China (PDR'2010)

Author(s)

• International Conference on Advances in Product Development and Reliability
• Xie, L. Y.

Bibliographic Information

Materials and product technologies : selected, peer reviewed papers from the 2nd International Conference on Advances in Product Development and Reliability, July 28-30, 2010, Shenyang, China (PDR'2010)

edited by L.Y. Xie ... [et al.]

（Advanced materials research, v. 118-120）

Trans Tech Publications, c2010

• : pbk.

Note

Includes bibliographic references and index

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). This three-volume set is a collection of 190 peer-reviewed papers on the topic of Advances in Product Development and Reliability. It addresses the scientific and technological issues underlying improvements in performance, reliability and lifetime. Its remit embraces the design and manufacturing aspects of product development and reliability, as well as operational life prediction and extension.

Table of Contents

Committees and Preface Full-Field Modelling of Crack Tip Shielding via the 'Plastic Inclusion' Concept Design for Lifecycle Cost and Preventive Maintenance Using Time-Dependent Reliability Fatigue Reliability Analysis Including Super Long Life Regime Distribution of Fatigue Lives for the Diecast Magnesium Alloy Crack Propagation of CCT Foam Specimen under Impact Fatigue A Mixed-Effect Multi-Failure-Mechanism Fatigue Reliability Model The Fracture and Fatigue Behaviour of Nano-Modified SAN Finite Element Analysis of a Compressor Disk Experimental Observations of Dominant Effective Short Fatigue Crack Behavior for Railway LZ50 Axle Steel Scale-Induced Effects on Fatigue Properties of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames Bending Ratcheting Tests of Z2CND18.12 Stainless Steel Deformation Analysis for Welding Assembly Processes of Automobile Panels Surface Rolling Effect on Effective Short Fatigue Cracks Density for Railway LZ50 Axle Steel Damage Modes and Strength Reliability Strategies of Railway Wheel Set Mechanical and Physical Characters of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames Cyclic Deformation Characters and Description of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames Measurement on Fracture Roughness Values of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames Modeling to the Fatigue Crack Growth Rates of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames Measurement on Fatigue Cracking Thresholds of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames 3D Visual Parametric Reliability Design System Development of Flange Based on ProEngineer Fatigue Limit Measurement of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames Anti-Ratcheting Design Software for Primary Auxiliary Pipeline in Nuclear Power Plant Ratcheting Boundary Analysis of Straight and Elbow Piping Corrosion Fatigue of Aircraft Aluminum Alloy Structure in the Coastal Environment and Improvements The Integrated Application Based on Order Moment Method and Improved Monte-Carlo Method in Mechanical Reliability Simulation Load Transfer Analysis of Cracked Bolted Joints Study on Rolling Contact Behaviors of Three Kinds of Railway Wheel Treads Life Prediction of High Temperature Welded Component by Skeletal Point Rupture Stress Studies on Fatigue Properties of Steel with Co-Based Alloy Hardfacing Coating Thermo-Mechanical Fatigue Behavior Investigation and Fracture Analysis on Austenitic Stainless Steel of Surge Line in Nuclear Power Plant Study on Dynamics Mechanics of Generation for Rail Oblique Crack The Safety Study on Corrosion Damage of LC4 Aluminum Alloys by Finite Element Method Fatigue S-N Relations of the Cast Steel for Chinese Railway Rolling Wagon Bogie Frames Determination of the Expansion Parameters for the Combined Welding and Expanding Connection of Tube-to-Tubesheet Fatigue Life Prediction of Spot-Welded Structure under Different Finite Element Models of Spot-Weld Numerical Simulation and Experimental Research on Fatigue Strength of the Injector Guide Pillar under Complex Loads Reliability Analysis of Interval Parameters Bar Structures with Affine Arithmetic Investigation of the Hydrogen Embrittlement on the 65Mn Steel from the Nuclear Power Plant with Small Punch Method Reliability Analysis Methods for Mixed Uncertainties in Structural System with Multiple Modes Acoustic Emission Analysis of Composite Laminates under Low Velocity Impact Predicting Fatigue Life of Pre-Corroded LC4 Aluminum Alloy by Artificial Neural Network A Study on Low-Velocity Impact Characteristics and Compression Strength after Impact of Ceramic/Resin Matrix Composites Experimental Study of the Electrical Potential Technique for Crack Monitoring of LY12-CZ Plate Specimen Discussion of Reliability Analysis for Aircraft Wing Box Structural System Progressive Damage Approach to Simulating Low Velocity Impact Response of Plain Weave C/SiC Composites Mechanical System Design of Large Span Retractable Roof Infrared Thermography and Acoustic Emission in 2D Plain Woven C/Sic Composites under Tensile-Tensile Fatigue Loading Validity Evaluation of AE Technique on Damage Monitoring of Different Woven C/SiC Composites under Mechanical Loading The Strength Analysis of Tower Vacuum Dryer Structural Research on Remote Data Acquisition System Reliability Simulation Modified Analytical Method for Stress Intensity Factor Calculation of Infinite MSD Plate Containing Multiple Holes The Mechanism Design of the Upper Air Crawling Robot Fatigue Crack Growth Rate of 16mnr Steel with Effect of Stress Ratio Review of Multiaxial Fatigue Life Prediction Technology under Complex Loading On The Fatigue Short Crack Behaviors of Directionally Solidified Superalloy DZ4 by In Situ SEM Observations Contacting Model Considerations of Interference Fit for Shaft-Hub System An Approach of Robust Reliability Design for Structure System with Multiple Failure Modes Optimization of Exponential Distribution Testing Period Based on Reliability Degradation Effect of Type-II and Type-III PMs on Operational Reliability of Buses A Theoretical Note on Mode I Crack Kinking and Branching Reliability Modeling for Symmetric Structure Systems Based on Copulas Research of Modern Railway Vehicle Structure Fatigue Design Method Based on Multibody Dynamic Simulation Prediction of Hardenability of Gear Steel Using Stepwise Polynomial Regression and Artificial Neural Network The Effect of Random Spectrum on the Fatigue Life of Hybrid Metal Matrix Composites Availability Research on K-out-of-N: G Systems with Repair Time Omission Dynamic Model of Common Cause Failure Based on Shocks Reliability Analysis of Shiplift Gear Based on System-Level Load-Strength Interference Model Optimizing of Turning Parameters Using Multi-Objective Genetic Algorithm Bifurcation of Non-Semi-Simple Zero Eigenvalues at the Critical Point of the Statical Bifurcation of Nonlinear Rotor System A Novel Variable Neighborhood Genetic Algorithm for Multi-Objective Flexible Job-Shop Scheduling Problems Failure Rate Analysis and Model Consisting of Four Elements for Components Hybrid Genetic Algorithm with Simulated Annealing Based on Best-Fit Strategy for Rectangular Packing Problem The Application of MARS on Crashworthiness Improvement Design of Double-Deck Isolation Systems Bearing Parameter Optimization of a Compressor Rotor System Based on Orthogonal Experimental Design An Approach Based on Enhanced Collaborative Optimization and Kriging Approximation in Multidisciplinary Design Optimization Planning of Step-Stress Accelerated Degradation Test with Stress Optimization General Particle Swarm Optimization Algorithm for Integration of Process Planning and Scheduling Theoretical Research and Experiment of Vibration Friction on Vibratory Compaction Experiment System Challenges in Reliability Assessment for Electronics Reliability Analysis of Structure with Local Sunken Plate Nonlinear Analysis on Rigidly Attached Structure of the Luffing Jib Tower Crane Residual Stress Analysis in Curing Process of COG Module Aging Change Point of Lognormal Distribution and its Implications Lifetime Prediction of Product Based on Proportional Hazards-Proportional Odds Model in Accelerated Life Testing Failure of Flip-Chip Circuit Interconnects under High Current Density Automobile Modeling Evaluations Based on Electrophysiology Development and Application of Vehicle Health Index Failure Analysis and Reliability Evaluation of a Planetary Gear Box The Effects of One Sided Gold Finish on the Reliability of Electrical Contacts under Fretting Conditions Residual Strength Degradation Model for Low-Alloy Steel in High Cycle Fatigue Load Study on Reliability of the Tower Crane Jib Anti-Seismic Reliability Analysis of Quayside Container Crane Fatigue Life Reliability Analysis of Belt Conveyor Driving Drums Based on FEM Finite Element Analysis of Sieve Box Structure in Fluidized Bed Reliability Analysis for Crane Boom Base on Probabilistic Finite Element Method The Dynamic Optimization Analysis of High-Speed Hybrid Thrust Bearing Finite Element Analysis on Flexible Attachments of Luffing Jib Tower Crane Tolerance Design for Four-Bar Function Generating Mechanisms with Joint Clearances Using Taguchi Method Statistical Evaluation on Cumulative Damage Property of Aluminum Alloy Welded Joint under Multi-Stage Loading Probabilistic Fatigue Property of Aluminium Alloy Welded Joint for High-Speed Train Reliability Analysis Based on Transverse Distribution of Random Loading Research on Mechanical Reliability Growth Model for Complete Failure Data Grey Model Based Particle Swarm Optimization Algorithm for Anticorrosion Reliability Design of Underground Pipelines Kinematic Reliability and Sensitivity Analysis of Delta Parallel Mechanism Research Progress on Fracture Mechanism of Mechanical Products Study on the Control System of an Automatic Testing Equipment for Diffusion Vacuum Pumps by Fault Tree Analysis SPN Based Reliability Analysis in the Process Industry The Development of Reliability Modeling and Analysis Tool Based on Stochastic Petri Nets Research of Accelerated Reliability Test on Server Research on the Six-Dimension Knowledge Classification System and Model for Modern Product Design Diffuse Response Surface Methodology to Reliable Optimization of Numerical Control Milling Optimization of Preventive Maintenance Policies for Aging Equipments in Finite Time Horizon The Determine Method of Maintenance Strategy for Multi-State System Research on Spurious Trip of 1oo2 Safety Instruments of Petrochemical Installation with Repair Considered Estimation of Failure Probability and its Applications in Reliability Data Analysis Step-Stress Accelerated Random Vibration Life Testing Effects of Thermal Exposure on Low Cycle Fatigue Behavior of Ti600 Titanium Alloy Life Prediction of Constant-Stress Accelerated Degradation Testing Using Time Series Method and Grey Theory Modeling for Time-Variant Reliability of Mechanism The Current Status of Process Planning for Multi-Material Rapid Prototyping Fabrication Fatigue Life Evaluation of Unstiffined Aluminum Panels with Multiple Site Damage Coupling Analysis of Heat Transfer in Finned Radiator Based on Numerical Simulation Codes ABAQUS and FLUENT Simulation of Position Control and Flow Rate Match of Integrated Hydraulic Actuator Unit A Hybrid Method for Determining the Dynamic Stresses of Railway Vehicle On the Design Approach of Double-Tubesheets Model and Simulation of Fluid Hydrodynamic Pressure at the Cutting Zone Considering the Surface Roughness Cargo Ride Safety Analysis of Trucks for Four Excitation Cases Design of an Oblique Tool for the Nano Removal Process Design of a Biped Toy Robot with an Automatic Center of Gravity Shifting Mechanism Function-Oriented Design and Verification of Point-Contact Tooth Surfaces of Spiral Bevel and Hypoid Gears with the Generated Gear Wear Life Prediction Model on 38CrMoAlA Alloy Steel Shear Strength and Performance of Glass-to-Metal Brazed Joints Twice-Modeling Approach for Concurrent Process Planning without Forced Decoupling Perception of Constraints in Conceptual Design within the Automotive Industry Research on Vibration Test Method of the Whole NC Machine Tool A Linear Goal Programming Model for Weight Calculation in Fuzzy AHP and its Application in Product Development Heterogeneous Knowledge Integrated Management Based on Topic Maps in Collaborative Product Development Support Activity Flow Based Forecast Model for the Quantity of the Aircraft's Support Equipments during Design and Development Phase Lateral Stability Control Design for Tractor Semitrailer Based on Virtual Prototyping Study on Semi-Active Control for Leaf Spring Suspension Based on Virtual Prototyping Finite Element Analysis on the Ability of Solder Joints to Resist Thermal Fatigue Reliability Analysis of Kinematic Accuracy of a Three Degree-of-Freedom Parallel Manipulator A Quantitative Method on Formative Elements Optimization of Car Styling Design Analysis of Thermal Properties of Super-High Speed Hybrid Journal Bearing Based on ANSYS Methods for Device Applications Debugging Development of a Surface Defect Inspection System for Cold Rolled Strip Based on Bright-Dark Filed Mode The Development of the Sustainable Manufacturing Processes Combinatorial Synthesis and Characterization of Thermoelectric Composition-Spread (La1-xCax)VO3 (0 x 1) Films Combinatorial Pulsed Laser Deposition and Thermoelectricity of (Ca1-xAx)3Co4O9 (A: Sr, Ba) Composition-Spread Films The Research on Bei Jia Zi of Tujia Minority and its Influence on Modern Product Design Product Sustainability and Realization Modern Product Design Platform in Distributed Resource Environment Product Development Process Integration Using Design Structure Matrix Comprehensive Evaluation for Generalized Product Quality Based on Fuzzy Entropy An Extended Monte Carlo Method on Simulating the Development Cost Uncertainties of Aircraft Visualized Analysis and Simulation Research on Dynamic Performance of the Whole NC Machine Tool Fatigue Life Prediction of Spring Buffer in GCD-1500 Cable Drill Research on Web-Based Virtual Grinding Machine Tool Feasible Solution of Profile-Shift Coefficient for Involute Internal Gear Pair in Zero-Tooth-Difference Mechanism An Principle and Technology of On-Machine Measurement for Large Gear Hopping The Influence of Following Error of Servo System on Machining Precision for NC Machine Tool Design of the Inner Helicoids of Screw Motor Stator's Steel Casing and Studying of NC Manufacturing Technology Study on the Influence of Rolling Technology on the Broadside Feature of Laser Tailor-Welded Blanks with Long Weld Seam Computational Analysis of Condensed Vaporized Alloying Elements of 5456 Aluminum Alloy The Optimal Maintenance Period for Repairable Product after Warranty Expiration under Renewing Warranty A Method of Quality Control for Networked Collaborative Product Development Analysis of Hydraulic Lifting System and Design of Cylinder for the New 450t Schnabel Car Vibration Effects on Tailstock of a Turning Machine Mean Square Error Criteria to Multiple Quality Characteristics Robust Design by the Weighted Tchebycheff Method Theoretical and Experimental Studies of Statistical Evaluation Method for Flatness Error GSPN Based Reliability Design for Intellectualized System A Series of New Nonlinear Dynamic Equations of Rolling Element Bearing Systems Study on Lateral Stiffness for Flexicoil Circle Springs with Rubber Pads The Integrated Performability Analysis Architecture of the Computer Networks Analysis of Dynamic Behavior of a Large-Sized Vibration Fluidized Bed Research on Optimization Model Based on House of Quality Fuzzy Theory in Industrial Environment Numerical Simulation Analysis of Fluid in the Semi-State within the Desulphurization Tower Transverse Vibration Analysis of Euler-Bernoulli Beams Carrying Concentrated Masses with Rotatory Inertia at Both Ends Dynamic Design Method for Magnesium Alloys Wheel of New Energy Vehicles Multiphase Flow Simulation and the Analysis Method of the Pressure Drop in the Vibrated Fluidized Bed Influence Factors Analysis of Hammer Head and Screen Plate Life of CFB Coal Crusher Research and Application on Product Data Management Technology Very High Cycle Fatigue Behavior and Thermographic Analysis of High Strength Steel Spares Utilization Calculation Method Based on Maintenance Support Activity Product Data Integration and Management Research Based on XML Transient Process Response Analysis of Forced Synchronous Elliptical Vibrating Screen Novel Approach to Ship Multidisciplinary Design and Optimization Using Genetic Algorithm and Response Surface Method Modal Analysis on the Truss Structures of Machine Tool A Conceptual Design Approach Generated by Integrating AD and TRIZ into the Conceptual Design Phase of SAPB

by "Nielsen BookData"

• NCID: BB03141371
• ISBN:
  • 9780878492541
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Stafa-Zurich
• Pages/Volumes: xviii, 995 p.
• Size: 25 cm
• Classification:
  • DC22 : 620.11
• Subject Headings:
  • LCSH : Materials science -- Congresses
  • FREE : Product technologies
• Parent Bibliography ID:
  • BA24926058