Advances in abrasive technology XIII : selected, peer reviewed papers from the 13th International Symposium on Advances in Abrasive Technology (ISAAT2010), the 1st Cross-Strait Conference on Precision Machining, 19-22 September 2010, Taipei, Taiwan

著者

• International Symposium on Advances in Abrasive Technology
• Liao, Yunn-Shiuan

書誌事項

Advances in abrasive technology XIII : selected, peer reviewed papers from the 13th International Symposium on Advances in Abrasive Technology (ISAAT2010), the 1st Cross-Strait Conference on Precision Machining, 19-22 September 2010, Taipei, Taiwan

edited by Yunn-Shiuan Liao ... [et al.]

（Advanced materials research, v. 126-128）

Trans Tech Publications, c2010

• : pbk.

注記

Includes bibliographical references and index

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Abrasive machining is one of the oldest technologies, and continues to have a far-reaching impact on a broad spectrum of industries. In particular, there is an ever-increasing demand by modern manufacturing for advanced abrasive techniques and other precision machining technologies. As well as abrasive-related technologies, electrical discharge machining (EDM), glass molding, machine tool systems, green manufacturing, laser-beam machining, tribology, advanced cutting methods, etc. are addressed here. The more than 167 presentations contributed by workers from all over the world will make this volume essential reading.

目次

Preface Organizers and Sponsors Session A1: Abrasive Jet Machining Progress in the Modeling of Abrasive Jet Machining Characteristics and Polishing Effect of Abrasive Jet Beam with Polymer Abrasive Suspension Additives Session A2: Abrasive Machining Mechanical Characterization of Lapping Plate Materials in Diamond Charging Process Simulation of Grinding Surface Creation - A Single Grit Approach A Study on Multi-Objective Optimization of Abrasive Blasting Systems Analysis and Modeling of Micro Abrasive Air Jet Cutting Aspect Ratio Contact Conditions in 5-Axis-Grinding of Double Curved Surfaces with Toric Grinding Wheels Analysis of Super-High Speed Point Grinding Forces Theoretical Analysis of Grinding Temperature Field for Carbon Fiber Reinforced Plastics Laser Assist Powder Jet Deposition A Study on Pressure Stability in Double-Sided Polishing Process Process Influences in the Wire Cutting of Concrete Research on Machining Simulation of Ultra High-Speed Grinding Machine Tool Based on Web Wear of Polishing Pad and Pattern Optimization of Fixed Abrasive Pad Grinding Characteristic Research of High Efficiency Deep Grinding for Viscous Material A Simulation System for Grinding Based on Virtual Reality Analysis of Roughness in Super-High Speed Point Grinding Grinding Performance of a Grain-Arranged Diamond Wheel against Aluminum Alloys and Ti6Al4V Study on the Subsurface Damage Distribution of the Silicon Wafer Ground by Diamond Wheel Investigation of Grinding Process Simulation Fabrication of a Spherical Silicon Solar Cell Module Application of a Case-Based Process Expert System for NC Camshaft Grinding Effect of Flexing on Coated Abrasive Belt Grinding of Stainless Steel Ultrasonic Vibration Grinding Test of Composite Ceramics Based on the Nonlocal Theory Study on Surface Residual Stress of Nano-Zirconia Toughened Alumina Ceramics under Two-Dimentional Ultrasonic Vibration Assisted Grinding Development of Media for Low Pressure Abrasive Flow Machining Experimental Investigation on High-Speed Grinding of 40Cr Steel with Vitrified CBN Grinding Wheel On-Machine Method to Condition the Grinding Ability of Resin-Bond Wheels A Study on the Spiral Polishing of the Inner Wall of Stainless Bores Modeling Surface Roughness and Hardness of Grinding SKD11 Steel Using Adaptive Network Based Fuzzy Inference Surface Texture Analysis of Fixed and Free Abrasive Machining of Silicon Substrates for Solar Cells Influences of Characteristics of Large Particle on the 'Trap' Effect of Semi-Fixed Abrasive Tool Session A3: Advanced Cutting Technology Laboratory Comparison of Mini-Discs with Point-Attack Picks Tool Wear Mechanism in Continuous Cutting of Difficult-to-Cut Material under Dry Machining On Geometrical Errors and their Suppression in Turning Operation by Controlling Thrust Forces Optimal Improvement on Cutting Yield Rate in ACF Attach Process of TFT-LCD Module Using Response Surface Method Study on Tool Life by Breakage in Micro Endmilling Comparative Studies on the Cutting Performance of HFCVD Diamond and DLC Coated WC-Co Milling Tools in Dry Machining Al/SiC-MMC Study on the Cutting Performance of HFCVD Diamond Coated Silicon Nitride Inserts in Dry Turning Aluminum Silicon Alloy Session B1: Brittle Material Machining Elastic and Plastic Behaviors in Ductile-Regime Machining Process of Quartz Glass DEM Simulation and Experimental Investigation of Silicon Carbide on Pre-Stressed Machining A Study on the Ductile Mode Cutting of Lithium Niobate A Study of Ultrasonically Assisted Fly Cutting for High Precision Machining Hard Brittle Materials The Investigation on Small Hole Drilling-Grinding in Glass and Ceramic Machining Schemes for Dicing Soda Lime Glass Session C1: CMP and Silicon Wafer Processing Effect of Shear and Thermal Characteristics on Chemical Mechanical Polishing A Dishing Model for Chemical Mechanical Polishing of Plug Structures Two Dimensional Ultrasonic Vibration Assisted Chemo-Mechanical Grinding of Si Wafer Machining Force and Modes for Si Wafer Machining with Rotational Tool Wafer Polishing Process with Signal Analysis and Monitoring for Optimum Condition of Machining Effects of Wafer Carrier Design on Contact Stress Uniformity in CMP Study on Chemical Mechanical Polishing with Ultrasonic Vibration Experimental Investigation on Effects of Passivants in the Abrasive-Free Polishing of Copper Film Friction Phenomenon in Chemical Mechanical Polishing of Oxide Film Diamond Pad Conditioners with Oriented Polycrystalline Diamond Cubes Mosaic Diamond Disks with Brazed Pallets for CMP Session C2: Coolants and Cooling Estimation of Heat Transfer Coefficients in Dry and Cold-Air Cutting Tool Life and Surface Roughness of FCD 700 Ductile Cast Iron when Dry Turning Using Carbide Tool Effects of Cutting Fluid with Nano Particles on the Grinding of Titanium Alloys Session D1: Design, Fabrication and Analysis of Devices for the Applications of Abrasive Technologies Development of Three-Dimensional Dynamometer for Wafer Grinder Elliptical Ultrasonic Assisted Grinding (EUAG) of Monocrystal Sapphire - Surface Formation Characteristics Session E1: EDM, Ultrasonic Machining, and Laser Machining Fabrication of Micro Shapes by EDM with Micro Electrodes Generated in Turning Operation Study on Application of Taguchi Method to Ultrasonic-Aided Spin Welding of Heterogeneous Plastic Materials Bending of Pure Titanium Sheet to Curved Surface Shape by Laser Forming Technique Microfabrication of Photosensitive Glass by Femtosecond Laser Direct Writing Repairing Damage on Ground Fused Silica by CO2 Laser Irradiation An Investigation of Attachment on Electrode Surface in Dry EDM Session E2: Eco-Machining Investigation of Eco-Friendly Fixed-Abrasive Polishing with Compact Robot Session F1: Finishing, Lapping and Polishing High-Integrity Finishing of 4H-SiC (0001) by Plasma-Assisted Polishing A Review on the CMP of SiC and Sapphire Wafers Polyline Dwell Time Algorithm for Every Type of Tool Path for Ultrasonic-Magnetorheological Combined Finishing Odor Suppression of Putrid Water-Soluble Coolant Using Home Ion Generator Study the Rheological Properties of Abrasive Gel with Various Passageways in Abrasive Flow Machining Processing Characteristics of Structured Lapping Films under Grinding Load Control Design of Product Surface Finish via Magnetic-Assistance Lapping of Polycrystalline Diamond Compact (PDC) Research on the With-In Wafer Non-Uniformity (WIWNU) of the Large Quadrate Optic in the Fast Polishing Process Fabrication of Small Polishing Tool by Using Electrophoresis Phenomenon Identification of Brittle-Ductile Material Removal Characteristics in Ultrasonic Aided Lapping of Engineering Ceramics Evaluation of Polished Surface for Viscoelastic Polymer Research on Axisymmetric Free-Form Creation with Rotating Polishing Tool Simulation Study of Sliding Control for Constant Polishing Force Using an Innovative Sphere-Like Polishing Tool on a Machining Center Chemical Effect on the Material Removal Rate in the CMP of Silicon Wafers On the Technologies of Electrochemical Mechanical Finishing EDM Properties of EC-PCD Using a Copper Electrode Using Electro-Rheological Chain Structure to Improve SKD11 Surface Gear Finishing and Modification Compound Process by Pulse Electrochemical Finishing with a Moving Cathode A New Polishing Pad of EVA-Adhesive-Dressed-with-SiC-Grits Polishing Face and its Applications in Silicon Wafer Polishing Mathematical Modeling of Electrochemical Deburring Study on Precision Polishing of a Mini Roller Mold Session G1: Glass Molding and Related Topics Abrasive Wear Caused by EMC Particles Numerical Simulation on Two-Step Isothermal Glass Lens Molding Session G2: Grinding Wheel and Abrasive Grain Technologies Elliptical Ultrasonic Assisted Grinding (EUAG) of Monocrystal Sapphire - Wear Behaviors of Resin Bond Diamond Wheel Effect of Wheel Arrangement on Ground Surface Topography in Horizontal-Axis-Type Rotary Surface Grinding A Study of the Diamond Tools for Grinding Polycrystalline Diamond Complex Grinding Assisted with Electrical Discharge Machining for Electrically Conductive PCD Loading in Grinding: Chemical Reactions in Steels and Stainless Steels The Application of Three-Dimensional Surface Parameters to Characterizing Grinding Wheel Topography Effect of Ground Surface Roughness of Tool on Adhesion Characteristics of PVD Coating Intermittent Grinding of Advanced Ceramic with the T-Tool Grinding Wheel Characterization and Performance of Monolayer Brazed Polycrystalline CBN Abrasive Tools Thrust Force Directional Vibration-Assisted Ductile-Mode Grinding of Single-Crystal Si Sharpening Mechanism Using Composite Electro-Plating In-Process Sharpening Technique Investigation on Material Property of Electrically Conductive Polycrystalline Composite Diamond (EC-PCD) Processing EC-PCD by Constant-Force Grinding Assisted with EDM Session H1: High Speed and High-Efficiency Machining Ultra High Speed Turning of Inconel 718 with Sialon Ceramic Tools Analysis of Surface Topography Characteristics in Electrochemical Mechanical Finishing Session I1: In-Process Measurement and Monitoring, Metrology Effects of Cutting Parameters on the Transverse Vibration of Diamond Circular Saw Blade Modeling and Simulation of 3D Surface Finish of Grinding Condition Monitoring in a Machine Tool Spindle Using Wireless Sensor Approaches to In-Process Measurement of Surface Roughness in Cylindrical Grinding The Three-Dimensional Surface Topographic Characterisation of Diamond Grinding Wheels Online Measurement of the Crankshaft Crankpin Roundness Errors in the Process of Coordinate Polishing with Abrasive Tap Improvement in Oxide-Pattern Sizes Controllability on Scanning Probe Nanolithography A Novel Piezoelectric Grinding Dynamometer for Monitoring Ultra-Precision Grinding of Silicon Wafers The Development of the Automatic Measurement of Straightness Using by a Ball Screw Study of AE Signal for Tool Wear Monitoring in Micro Milling Based on LVQ Algorithm New Development of Contact Probe and Methodology Design of Digital Filters for Si Wafer Surface Profile Measurement - Noise Reduction by Lifting Scheme Wavelet Transform Online Cutting Tool Wear Monitoring Using I-Kaz Method and New Regression Model On-Line Inspection of the Surface Roughness of Workpiece in Ultraprecision Machining Session M1: Machine Tools and Systems, Tooling Processing Wear Performance Evaluation of Tungsten Carbide Taps in Blind Hole Tapping Cast Iron A Study of the Cutting Temperatures of Turning Stainless Steels with Chamfered Main Cutting Edge Nose Radius Worn Tools Development and Analysis of Special-Shaped Stone Multi-Function NC Machining Center Experimental Study on Milling Hardened SKD Steel Using Micro CBN Ball-End Mills Drilling Force and Temperature of Bone by Surgical Drill A Ball-Bar Based Error Measurement Method for a RRTTT-Type Five-Axis Machine Tool Research on a Helical Drill Point Grinding Machine The Kinematical Performance Analysis of a Kind of Parallel Turning-Grinding Machine Development of a Reverse Micro EDM-Drilling for Holing Diamond-Tool Study on Thermal Properties of Hybrid Journal Bearing for Super High Speed Grinding Machine Session M2: Micro/Nano-Machining Grinding and Polishing of Nanolayered Structures: Thin Film Amorphous Silicon Solar Panels CIMDW - A New Technique of Corona Ignited Micro-Discharge in Microwelding Modeling Aspect Ratio of a Micro EDM Hole Effect of Material Type and Tip Radius of AFM Probes on Nanosheets Groove Machining Accuracy Mold Fabricated by Nanoscratching for Nanoimprint Lithography The Determination of Key Material Property in High Energy Beam Drilling Grindability of Micro Pyramid-Structured Surface for Various Hard and Brittle Materials Evaluating the Micromachining Rate of Nanosecond Laser with Thermal Analysis Optimal Parameter Design in Flip Chip Micro-Machining Process for Solder Residue by Using Design of Experiments Approach Influence of the Electrochemical Dissolution Effect on the Material Removal Rate Utilizing Electrokinetic Phenomenon A Study of Uncut Chips Produced by CNT Grinding Wheel In Situ: A Novel Approach for the Production of Micro Holes Analysis of Mechanical Property of Crystal CaF2 and Effects of Tool Rake Angle on Ductile Machining Process Session S1: Surface Integrity and Materials Characterization Investigation of Surface Integrity in Conventional Grinding of Ti-6Al-4V Effect of Aged AlN Reinforced Al-Si Alloys on Dry Sliding Wear Behaviour Optimal Cutting Parameters for Desired Surface Roughness in End Milling Inconel 718 Polish Properties of Nano-Cluster Diamonds on Glass Substrates Study on the Cutting Force, Temperature and Residual Stress in Milling the New Rotor Steel Electromigration Analysis and Electro-Thermo-Mechanical Design for Package-on-Package (POP) The Research of Modulation Period on Photoelectric Properties of Ti/TiN Multilayer Films Study on Deformation and Damage of Single Crystal MgO by Micro-Scratch Micro Abrasive Jet Machining of Silicon Carbide (SiC) Fiber Reinforced Ceramic Matrix Composite Thermal Transport in the Copper Powders with Nanometer and Micrometer Particles A Study of Mechanical Properties of Human Femoral Heads Using Nanoindentation Session T1: Tribology in Manufacturing Wear Rate Predication for Steel Based on Regression Analysis Plastic Flow and Related Wear Mechanisms of CVD TiC Coatings Experimental Research on Wear Random Process Experimental Study on Friction Characteristics of Hot-Pressing Matrix and Granite under Dry Sliding Conditions Analysis of Surface Roughness Transformation of Oxide Scale during Hot Steel Manufacturing Session T2: Truing, Dressing and ELID Dressing of Monolayer Brazed Diamond Wheel for Grinding Li-Ti Ferrite Generation Process of Cutting-Edge Distribution on Grinding Wheel with Single-Point Diamond Dressing Nozzle-Type ELID Grinding Characteristics of Cemented Carbides The CMP by Polishing with GiP Dressed by BODD Surface Roughness and Morphology of Titanium Plate Ground with Fixed and Loose Brown Alumina Abrasives Study on Plane Magnetic Abrasive Finishing Process - Experimental and Theoretical Analysis on Polishing Trajectory - Investigation of Semi-Fixed Abrasive Plate Wear Characteristics

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB03631891
• ISBN:
  • 9780878492428
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zurich
• ページ数/冊数: xvii, 1045 p.
• 大きさ: 25 cm
• 分類:
  • DC22 : 621.92
• 件名:
  • LCSH : Abrasives -- Congresses
  • LCSH : Grinding and polishing -- Congresses
• 親書誌ID:
  • BA24926058