Material and manufacturing technology : selected, peer reviewed papers from the 2010 International Conference on Material and Manufacturing Technology (ICMMT 2010), held on September 17-19, 2010 in Chongqing, China
著者
書誌事項
Material and manufacturing technology : selected, peer reviewed papers from the 2010 International Conference on Material and Manufacturing Technology (ICMMT 2010), held on September 17-19, 2010 in Chongqing, China
（Advanced materials research, v. 129-131）
Trans Tech Publications, c2010
- [set]
- pt. 1
- pt. 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and index
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This special volume comprises 287 expertly refereed papers. The main theme covered is Materials and Manufacturing Technology; the main goal being to provide an international scientific forum for the exchange of new ideas in a number of fields, and to facilitate in-depth interaction via discussions with peers from around the world. Core areas of Materials and Manufacturing Technology, and multi-disciplinary, inter-disciplinary and practical aspects are covered, making this essential reading for anyone interested in these topics.
目次
Committees
Reviewers
Preface
Research on Fault Diagnosis for Centrifugal Compressor Using Entropy-Based Fuzzy Gray Relational Analysis
Simulation of Hybrid Electrical Vehicle Automated Mechanical Transmission Control System
Design and Study of Automobile Air Condition Control System Based on CAN Bus
Study on Automotive Air Conditioner Control System Based on Incremental-PID
Vibration of Wind Turbine Blade Modeled as Composite Thin-Walled Closed-Section Structure
Experimental Analysis of Electro-Mechanical Characterization of Piezoelectric Stack Actuators
The Characterization of Orthogonal Affine Bivariate Pseudoframes
Study on Heat Release Behavior of Cunninghamia lanceolata Biomass by TD-GC-MS
A Study on Urban Low-Carbon Landscape Construction
Chemical and Physical Changes for Dimensionally Stability of Compressed Wood
Ontology-Based Workflow Semantic Representation and Modeling Method
Analysis on Function Components and Biohealth Function of Phyllostachys heterocycla Biomass
Analysis on Health Risk of Volatile Organic Compounds of Poplar Composite Biomaterial by GC-MS
Tensile Properties of 1060 Al Alloy Subjected to Constrained Groove Pressing
Mathematical Model Research on Ultrasonic Breaking Up Dendrite in Preparing Semi-Solid A356
Networked Manufacturing System Based on ASP and SQL Server
Shock Response Analysis for a Journal-Bearing System by a Results Comparison
Research on Equipment Parameters Management Mode of Complex System
Research on Dynamic Weight WFQ Algorithm of Wireless Networks
Key Frame Extraction Algorithm Based on Information Theory
Preparation and Characterization of SnO2/WO3/MWCNT Nanocomposite Thin Film for NO2 Gas Sensor
The Application of Dynamic Finite Element Method in Beam Structure
Study on Planar Motion Table System for Nano-Machining Based on Aerostatic
Self-Crosslinking and Cocrosslinking with Styrene of the Unsaturated Poly(silyl ester) and Characteristics of the Crosslinked Product
Experimental Research on the Robotic Compound Polishing Process with Mixed Magnetic Abrasive
Research on Dynamic Intrusion Detection Model Based on Risk Coefficient
Application of Ultrasonic Wave Technology to Evaluate the Corrosion Depth of Concrete in Acid Rain Environment
Research on Vickers Hardness Image Definition Evaluation Function
Growth and Fundamental Properties of SiGe Single Crystal
Chemical Characterization of Mesoporous Material Supported ZnO Nanoparticles for Hydrogen Sulfide Capture from Gas Streams
Manufacturing Technology of Strengthened Poplar Veneers
Synthesis and Structural Characterization of Surface-Modified TiO2
A Remote Experiment Platform for Robotic Control and Simulation
Investigation of Core Node Separation and Crush
Cutting Tool Edge Temperature in Dry Hard Orthogonal Cutting AISI D2 Tool Steel with CBN Tool
A Methodology for Idea Generation in Sustainable Product Design
Numerical Simulation of Hygro-Thermal Deformation of Concrete Based on Heat and Moisture Transfer
Effects of Filling Pressure on the Flow Behaviors during Vacuum Counter-Pressure Casting Thin Wall Aluminum Alloy
Effects of Gating System on the Flow Behaviors during Vacuum Counter Pressure Casting Thin Wall Aluminum Alloy
Experimental of Energy Dissipation Characteristics of Metal Rubber
Intelligent Control of Coke Oven Production Process
Effects of Low Temperature and Hot Pressure Molding Process Conditions on Unidirectional C/C Composites
Study on the Effect of Value of the Current on Synthesis of W-C-Co Composites under an Electric Field
Research on Electro-Hydraulic Load Simulator Based on Building Model of Flow Press Servo Valve
A Calculation Model for the Film Thickness and Component Uniformity of Twin Co-Sputtering Target System
Study on Static Characteristics of an Integrated Six-Axis Accelerometer Based on Parallel Mechanism
Effect of Temperature and Water Immersion on the Mechanical Properties of Coated Fabrics
A New Method of Constructing Tooth Surface for Logarithmic Spiral Bevel Gear
Preparation and Gas Permeation of Zeolite 5A Hybrid PR/PVA Based Carbon Membranes
Optimization of Machining Process for Aluminum Alloy Thin-Walled Supporting Part on UG NX
Preparation and Application Properties Analysis of Hyperbranched Polyurethane Leather Finishing Agent
Analysis and Research of High Speed Milling of Thin-Walled Bracket Part Based on UG NX
A Novel Immune-PSO Algorithm for Job Shop Scheduling
The Error Modeling on a Kind of Parallel Machine Tool in Considering the Joint Gap
Synthesis of Amphoteric Phosphate Ester Surfactant by Polyphosphoric Acid and Its Application in Free-Chrome Collagen Fiber
Research on the Rough Cut of Heavy Pressure Vessels
Effect of Thermal Stimuli on Physical Behaviors of PET/PTT Bicomponent Filament
The Synthesis and Characterization of Polyether-Modified Polysiloxane Phosphate
Effect of Annealing Atmosphere on the Mg2Si Film Growth Deposited by Magnetron Sputtering
Preparation and Characterization of Negatively Charged Polysulfone Hollow Fiber Membrane by UV-Photografting Polymerization of AMPS
Fault Diagnosis of Rotating Machinery Based on Local Wave Decomposition and Independent Component
Use of BP Neural Network in Near-Infrared Spectroscopy Calibrations for Predicting of Wood Density
Corrosion Properties of 20# Pipelines Steel in Near-Neutral Soils
Directly Catalytic Decomposition of H2S to Sulfur and Hydrogen under Microwave Conditions
Numerical and Experimental Investigation into Hot Stamping of High Strength Steel Sheet for Auto B Pillar Reinforced Panel
Real-Time Registration Architecture for Far Infrared and Visible Image Using Mutual Information
The Research of Infrared Radiation Detection on High-Performance Mica Insulation Material Thickness
Effects of Sintering Temperature on the Structure and Conductivity of LiSn2P3O12 Prepared by Mechanical Milling Method
Effects of Prosthesis Stem Materials on Stress Distribution of Total Hip Replacement
Corrosion Mechanism of Functional Refractories for Continuous Casting by Free Cutting Steel
Research on the 3D Temperature Field of Transformer Winding Based on Finite Element Analysis
Inverse Regression Analysis Method to Determine Mathematical Model of Dislocation Density Using Flow Stress Curves
Experimental Investigation on the Multiple Jets from a Single Droplet by Electrospinning
Fiber Winding Precision Tension Fuzzy Control System
Anti-Shock Optimization of a Certain Gas Turbine Foundation by DDAM
Shrinkage of Full-Scale Girders Cast with Self-Consolidating Concrete
Effect of Red Extractives of Plantation Woods on Bamboo Mildewing
Effect of Dies Temperature on Mechanical Properties of Hot Stamping Square-Cup Part for Ultra High Strength Steel
Study on the Process of Sheet Metal Simulation
Intelligent Control of Turbo-Expander System
Effects of Alkaline Extraction on Micro/Nano Particles of Phyllostachys pubescens Biomass
Finite Element Analysis of Adhesively Bonded Single-Lap Joints
Multi-Parameter Optimization Algorithm of Frequency-Dependent Model for Viscoelastic Damping Material
Investigation of Thermal Conductivity of Alumina/Silicone Oil Electrorheological Fluids
Experimental Research on Effect of Thermohydrogen Treatment on Machinability of Ti6Al4V Alloy
Anion Ion Exchange Fiber Based on Polyacrylonitrile (PAN) Matrixes and Its Selective Adsorption for Heavy Metal Ions
The Importance Role of WC Coat for Hydraulic Turbine Protection
The Effect of Sintering Conditions on the Microstructural Parameters of Particle Composites
Preparation of the Plywood Using UF Resin Modified with Blocked Isocyanates
Preparation of Moistureproof Particleboards Using Modified UF Resin with Melanine
The Profile and Structure Design on Trochoidal Vacuum Pump
Composite Measurement of Elasticity Coefficients of Brittle Materials and its Programming
A New Performance Estimate Method for Design of Storage-Type Domestic Electrical Water-Heaters Based on the CFD Simulation
Structure and Corrosion Resistance of Tin Salt Conversion Coating on Aluminum Alloy
The Development and Application of Smart Garment Materials
Field Emission of Aluminum Nitride Nanocones Deposited on Titanium Substrate
Simulation and Research on the Rheocasting Process of 7075 Aluminum Alloy
Tax Auditing in Enterprise Resource Planning (ERP) Systems: The Influence and Countermeasures
Investigations on the Crack of Centrifugal Casting High-Speed Steel Rolls
A Study on the Effects of Heat Treatment to the High-Carbon HSS Roll
Sol-Gel Synthesis and Characterizations of LiCF3SO3-CeO2 Solid Composite Electrolytes
PID Controller Parameter Tuning Based on Iterative Learning Control
A Coupling Dynamic Model for the Process of Chromium Ore Smelting Reduction in a Converter
Electrochemical Performance of Li3V2 (PO4)3/C Cathode Material Prepared by Soft Chemistry Route
Thermal and Electrical Properties of PVDF-HFP-LiCF3SO3-ZrO2 Nanocomposite Solid Polymer Electrolytes
Experimental Research on Stress Relaxation of Diskspring Used for Laser Optical Mounts
Design of Ultrasonic Horn for Slip-Ring Metal Welding
Effects of Rare Earths on the Austenite Recrystallization Behavior in X80 Pipeline Steel
Experimental Study on Mechanical Properties of Preloaded Diskspring Steel in Medium Temperature Range
Synthesis of C-Fe3O4 Magnetic Nanocomposite for the Fast Removal of Dye Pollutants in Water Resources
Thermal Error Modeling and Compensating of Motorized Spindle Based on Improved Neural Network
Conductivity Studies of ENR Based Proton Conducting Polymer Electrolytes
Multi-Mode Resource-Constrained Scheduling for Complex Product Design Tasks
Bonding Quality of Wood-FRP Interface with Ambient Curable Epoxy Adhesives
Effect of Relative Humidity on Mechanical Properties of Birch Laminated Veneer Lumber
Analyses of CMP Mechanism of NiP Substrate of Computer Hard-Disk with Alkali Slurry
Effect of Relative Humidity on Reliability of Nondestructive Testing for Birch Laminated Veneer Lumber
Relationships between Dynamic Young's Modulus and Static MOE of the Reinforced Poplar LVL
Structure Form-Finding and Materials Lofting of Inflatable Wing
Evaluation of Moisture Based on Gray Correlation Theory
Performance Study of Structure Improvement Design for Storage-Type Domestic Electrical Water-Heaters Based on the CFD Simulation
Interfacial Interactions in Clay-Based Polymer Nanocomposites: Effect of Surfactant
An Adaptive Particle Swarm Optimization Algorithm Based on Cloud Model
Magnetic Nanoparticles Derivatized with both Functional Moieties for the Recovery of Heavy Metal Ions in Environmental Water
Research on the Phase Transformation of Silicon Anode Material for Lithium Ion Batteries by Constant-Capacity Discharging
A New Method and Equipment to Manufacture the Composite Powder Materials by Vacuum Co-Deposition of Double Sources
Preparation of Hydrolyzed ZnO/Zn Hybrid Nanostructure with Zn Nanopaticle and its Photocatalytic Performance
Synthesis of a Silica Material with Surface Macroporous Arrays by a Template Method
Coupled Fluid-Thermal Finite Element Analysis of Droplike-Shape-Spacer Nozzle's Fluid Field of Al Roll-Casting
Investigation and Implementation of a Web-Based CAD System for Fabric Appearance
A Study of Microstructure and Surface Hardness of Parts Fabricated by Laser Direct Metal Deposition Process
The Application of CPFR Model in Information System
Research on Virtual Prototyping Development of Product Information Modeling Method
The Study on Hospital Information Systems Based on Post-Relational Database
Automatic Detection System of Web-Based Malware for Management-Type SaaS
Discussions on the Potential, Function and Reconstruction Method of Landscapes in Urban Industrial Wasteland
Research of Stress Transfer Area and its Length Prediction of Single-Lap Adhesive Joint
Discussion on Influencing Factors in College Students' Web-Based Learning of English
Effects of External Transverse Alternating Magnetic Field on the Oscillating Amplitude of Atmospheric Pressure Plasma Arc
The Design and Realization of the Virtual Learning Environment about Yiwu Regional Culture
The Composting Treatment of Residue from Biological Municipal Waste Anaerobic Digestion
Numerical Simulation of a Combined Plasma Arc Based on Sequentially Coupled Physics Analysis
Effect of Pre-Oxidized CuO Layer in Joining between Polyethylene Terephalate (PET) and Copper (Cu) by Using Pulsed Nd:YAG Laser
GC/MS Analysis on Biomedical Resources of Extractives of Eucalyptus Leaves for Biomedical Engineering
Synthesis and Characterization of Immobilized Nanometer Calcium Titanate and the Application in Speciation Analysis for Chromium
Study on Microstructure of Semi-Solid Magnesium Alloy Manufactured by Gas Bubbles Stirring
Photocatalytic Degradation of Methyl Orange on Y Zeolite Supported TiO2
An Exploratory Study on Agriculture Risk Management Based on Ontology
Models of Agriculture Risk Management with Agriculture Ontology
Study on the Simulation System Based on STEP-NC
Sintering and Crystallization Behavior in Li2O-Al2O3-SiO2 (LAS) Glass
A Study on Key Technologies of Digital Library Information Service and their Application Prospect in China
Microstructure and Mechanical Properties of Magnesium Prepared by Spark Plasma Sintering
A Evaluation Framework for Quality of Experience in 3G Network
Effect of Hardness of Second Phase Particle on Fatigue Crack Growth Behavior of Steels with Hard Second Phase Particle in Soft Ferrite Matrix
DT-GC-MS Analysis on Environmental Risk of Poplar Engineering Biocomposites
Synthesis and Photocatalytic Property of BiVO4/FeVO4 Composite Novel Photocatalyst
The Remote Technology Support for Motion Controller Based on the Ethernet
Study on Optimization of CMP Slurry for Tantalum in ULSI Based on Taguchi Method
Reaction between Carbon Dioxide and Mechanically Activated Metal Powder
Photocatalytic Methyl Orange Degradation on TiO2-NaX Composite
First Principles Calculation of Adhesion at Fe/WC Interface
Research on Structural Dynamic Optimal Design of NC Internal Grinder
Technical and Performance Study of Ti-W Composite Chemical Conversion Coating on Aluminum Alloy
Study on the Orientation of Unidirectional C/C Composites
Instable Plasticity and Precipitation in AZ91D Magnesium
Analysis on Shear Mechanical Properties of Birch Laminated Veneer Lumber
Study on Preparation and Properties of Starch and 4-Phenolsuflonate Graft Copolymer with HRP Catalysis
Structures and Properties of Alkyl-Phosphate Potassium Salts
TiO2-HY(FeY) Composites Used as Photocatalysts on Methyl Orange Degradation
Statistical Models to Predict Fresh Properties of Self-Consolidating Concrete
Study on Synthesis and Properties of a Novel Borate Ester Surfactant
Preparation and Characterization of Degradable Poly(silyl ester) and the Self-Crosslinking Reaction of Poly(silyl ester) without Solvent
Numerical Simulation of Welding Distortion Using Shrinkage Force Approach and Application
Study on Preparation and Properties of Copolymer of Phenol and Acrylamide by Enzyme Catalyzed Polymerization
Protection of Nano Coating to the Through-Flow Parts of Hydraulic Turbine
Design and Implementation of the Block Cipher-SMS4 IP Core
Effect of Solution Annealing on Microstructure and Mechanical Properties of MIM Fe-Cr-Mn-Mo-N Stainless Steels
Source(s) Identification of Variance Shifts in Bivariate Process Using LS-SVM Based Pattern Recognition Model
Dynamic Integrated Scheduling Algorithm of Complex Multi-Products with Identical Machines
An Algorithm of Simple Multi-Product Scheduling Problem with No-Wait Constraint between Operations
Three-Dimensioned Extrusion Simulation and Analysis of Bending Aluminum-Alloy Tube Based on Deform Software
Constitutive Equation of Ti-6Al-3.5Mo Titanium Alloy at High Temperature
Performance and Reliability Analysis of Bundled SWCNT as IC Interconnects
Research of Electrical and Hydration Behavior of Phosphoaluminate Cementitious Material
Optimization of Warpage in Injection Molding Based on Simulated Annealing Algorithm
Parameters Optimization of Semisolid Diecasting Process for Air-Conditioner's Triple Valve in HPb59-1 Alloy
Microstructure Characteristics of Eutectoid Pearlitic Steel after Equal Channel Angular Pressing at Room Temperature
The Decay Resistance Properties of P. Ussuriensis Kom Lumber Impregnated with Preservative by Roller-Compression
Kernel Principal Component Analysis Feature Detection for Underwater Images
Experimental Studies for Burrs in Dry Drilling of Stacked Metal Materials
Preparation of Acetate Grade Pulp from Birch by Alkali Preimpregnation Kraft Process
Research on Velocity Influence on Thermal Deformation Field of Heavy Hydrostatic Thrust Bearing
Cutting Path Optimization of Pattern Pieces in Garment Automatic Cutter
The Numerical Simulation Research of Steam Heating Process of Heated Mandrel Winding
Yield Line Analysis of Bolted Connections to I-Section Webs
Dynamic Constitutive Relation of EMC
Cutting Force Analysis when Milling Ti-6Al-4V under Dry and Near Dry Conditions Using Coated Tungsten Carbides
Determination of Nanocrystalline Fe80Cr20 Powder Based Alloys Using Williamson-Hall Method
Tool Wear of PVD Coated Carbide Tool when Finish Turning Inconel 718 under High Speed Machining
A Sustainability-Based Building Material Manufacturing Project for Post-Disaster Reconstruction: A Case Study
SH: A Novel Method for the Dynamic and Shortest Path Problem
Synthesis and Application of a Modifier with Low Formaldehyde Emission to Enhance General Wood Properties
Effect of Finishing Temperature on Mechanical Properties of a Nb-Microalloyed Steel Sheet
Fabrication of a -TCP Nanomaterial and its Inhibitory Effects on Human Ovarian Cancer SKOV-3 Cells
Preparation of Nanocrystalline -Alumina Using Ultrasonic Technique
Microscopic Analysis and Experimental Research on Thermal Mechanical Behavior of Natural Aggregate Concrete
Technical Parameter Research of High Purity Green SiC from Cutting Waste Mortar of Solar Silicon Wafer
Characteristics Before and After Heat Treatment of Co-Free AB3-Type Fe Substituted Hydrogen Storage Alloys Used for Ni-MH Batteries
Py-GC/MS Analysis on Biomedicine of Ether/Acetone Extractives from Eucalyptus camaldulensis Biomass
The Effects of Nodularity Distribution on Vertical Configuration Mould for Automotive Ductile Iron Casting
Reversing Clogging in Vertical-Flow Constructed Wetlands by Backwashing Treatment
Numerical Simulation of Solar Ground-Source Heat Pump with Latent Heat Storage
The Study on the Mechanical Characteristics of FRP Strengthened RC Beam
Study on the Anti-Sliding Attenuation Law of "Super-12.5" Up-Layer Bituminous Pavement
The Rack-Pinion Gearing for High Order of Contact
Shock-Induced the Ignition Mechanism of Micrometer Aluminum/Propylene Oxide
Dynamic Analysis for Rotary Detecting Table of ICTY
Simulation Technologies for Tamper System of Asphalt-Paver Based on AMESim
Influence Research of Velocity on Lubricating Properties of Sector Cavity Multi-Pad Hydrostatic Thrust Bearing
Surface Treatment of 45 Steels by Plasma Beam Alloying and Plasma Surface Quenching
Effects of Microstructural Evolution and Mechanical Properties on 440C-TiC Composite Steel by HIP Treatment
Research on Velocity Field and Dynamic Pressure Effect of Oil Film of Hydrostatic Center Rack
The Helical Gear with Equal Conjugate Curvature
Physical Modeling of Cylinder Upsetting with Plasticine for Validation of FEM
Study on Smelting Metallic Magnesium by Siliconthermic Reducing Method and its Reaction Kinetics
Study on Flexural Fatigue Performance and Damage Laws of Hybrid Fiber Reinforced Concrete
Design and Study of Lapping Device in Large Caliber Spherical Surface Valve Core
Study on Heating Steady Temperature Field in a ZrO2/FGM/Ti-6Al-4V Composite Plate Considered Temperature Dependency Based on NFEM
Preparation of Activated Carbon from Waste Particle Board by Chemical Activation Using Potassium Hydroxide
Pyramid Shaped Pyrolysis Flame Catalyst Synthesis of Carbon Nanofibers
The Quantitative Evaluation on the Response of Climate Change upon the Sustainability of the Agricultural Production
Solvents Effect on the Structure and Properties of Thermosensitive Polyurethane/Poly(N-Isopropylacrylamide) Semi-Interpenetrating Polymer Networks
Study on Parameter Optimization for Polishing
Forming of 2A12 Aluminum Alloy Double Curvature Thin-Wall Part Based on the Hill (1948) Anisotropic Yield Criterion
Research on Influence of Cavity Depth on Load Capacity of Heavy Hydrostatic Bearing in Variable Viscosity Condition
Simulation Study on Combustion and Emission Process of High Proportional of DME-Diesel Mixed Fuel
Quantitative Study on the Effect of Extrusion Process of AZ80 Magnesium Alloy
Research on the Supporting Technology for Design, Process and Manufacturing Integration
Process Optimization and Structural Characterization of Fe3Si Layer by Pulse Electrodeposition
The Application of "Three-Box" Energy Analysis Method on the Combined-Station
Finite Element Modeling of the Geometry Size Effect for Adhesive Joints Strength
Appling Fuzzy Logic for Optimization Formulation of Sapphire Precision Grinding
On the Effect of Curvature Radius on the Spif-Ability
Preparation and Evaluation of Nanocomposite LDPE Films Containing Ag and ZnO for Food-Packaging Applications
Study on the Characterization of Zinc Ferrite High-Temperature Coal Gas Desulfurization Agent
Transverse Impact and Tensile Behavior of the Three-Dimensional Woven Fabric Reinforced Thermoplastic Composites
Viscosity Models Based on Network Theory for Polymer Melts
Synthesis and Properties Epoxy Resin/Mesoporous Silica-Sepiolite Nanocomposites
The Effect of Different Lubricant Mixture and the Method of Preparation on Properties of Effervescent Tablets
Finite Element Analysis and Design Improvement for Ends Warping of Refrigerator Door
NiO Development on FeCrAl Substrate for Catalytic Converter Using Ultrasonic and Nickel Electroplating Methods
Research on Virtual Enterprise Risk Control Based on Optimization
Dynamic Analysis of IT Services Outsourcing Based on Resource Dependence Theory
Study on Electron Shopping Website Based on ASP.NET
Study of Access Algorithms in Wireless Network
Research of Multimedia Data Transmission Based on UDP
Study on 3D Virtual Reality Modeling
Research and Design Support System for University Research Learning Base on Network
Study on the Natural Convection and Formation of Periodic Diphase Dendrite in Al-La Alloys
Simulation of Ascent Rule for the Individual Escape Suit
The Design and Study on Portable Pipe Thread Shaping Machine
3-D Quasi-Steady State Heat Transfer Analysis for an Air-Cooled Motorcycle Engine
Flow Stress Correction of AZ80 Magnesium Alloy for Deformation Heating at High Strain Rates during Hot Compression
Catalyst Synthesis of Carbon Nanotubes by Substrate Method
Comparison with Thermo Hydrodynamic Lubrication between 2D and 3D Model in Thrust Bearing by Computing Simulation
Effects of Sampling Substrate for Carbon Nanotubes Synthesis
The Application of Numerical Analysis in the Optimization of Deformation Resistance Model
Pressure Field Analysis of Continuous Rotary Electro-Hydraulic Servo Motor Based on ADINA
Variance of the Mechanics Properties of Populus Ussuriensis Kom Lumber Compressed by Rollers
A New Dynamic Globe Pheromone Ant System and its Application in VRP
Review on Applications of Low Loss Amorphous Metals in Motors
Study of the Emergency Logistics Based on GERT
Research of Pore Structure of Phosphoaluminate Cement Paste Using Nitrogen Adsorption Isotherm
Dynamic Vehicle Routing Problem and its Algorithm Analysis
Achieving Enhanced Mechanical Properties and Analysis of Chemical Kinetics of the In Situ Reaction in an Al-TiB2In Situ Composite
Designs and Development of the Experimental Platform of Virtual Simulation Camera
The Cooperative Organizational Modes for Technological Exploitation: Evidence from Chinese Heating Ventilating and Air Conditioning Industry
Modeling of Sensor Assignment in Cooperative Target Tracking
Study on Schemes for Seamless Multicast Handover in the Proxy Mobile IPv6 Based on Wireless Networks
Study of High-Speed Processing for Network Intrusion Detection System
Research of Earth Berm and the Simplified Analysis
Research and Implementation of Intrusion Detection System Based on Artificial Neural Network
Log-Based Network Security Audit System Research and Design
Design and Implementation of Video Acquisition System Based on Embedded Linux
Research on Gird Task Scheduling Based on Ant Colony Algorithm
Logging-On System Integrated B/S and C/S Based on RSA Asymmetrical Encryption and Web Service
「Nielsen BookData」 より
