Ductility of bulk nanostructured materials : special topic volume with invited peer reviewed papers only
Author(s)
Bibliographic Information
Ductility of bulk nanostructured materials : special topic volume with invited peer reviewed papers only
（Materials science forum, v. 633-634）
Trans Tech, c2010
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and index
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters BCI (WoS).
Strength and ductility are two of the most important mechanical properties of structural materials, but this usually involves a trade-off, because of the fundamental inverse proportionality of these two features. Since the 1980s, bulk nanostructured materials have emerged as a new class of material having unusual structures and, as a result, have attracted increasing attention. Unfortunately, most bulk nanostructured materials still do not evade the strength-ductility trade-off dilemma, and usually have very poor ductility. The poor ductility of bulk nanostructured materials has indeed become a seemingly insurmountable obstacle to the widespread technological application of structural bulk nanostructured materials.
Table of Contents
Preface
I. Deformation Mechanisms of Bulk Nanostructured Materials
High-Rate Plastic Deformation of Nanocrystalline Tantalum to Large Strains: Molecular Dynamics Simulation
Effects of Microalloying on the Mobility and Mechanical Response of Interfaces in Nanocrystalline Cu
Molecular Dynamics Simulations of Nanocrystalline Nickel and Copper Revealing Different Failure Model of FCC Metals
A Computational Model for Intergranular Fracture in Nanocrystalline and Ultra-Fine Polycrystalline Metals
Crack Blunting through Lattice Dislocation Slip in Nanocrystalline and Ultrafine-Grained Materials
In Situ Transmission Electron Microscopy Investigation of the Deformation Behavior of Cu with Nanoscale Twins
Microstructural Origin of Superior Compressive Ductility of a Nanocrystalline Metal
Overview of the Grain Size Effects on the Mechanical and Deformation Behaviour of Electrodeposited Nanocrystalline Nickel From Nanoindentation to High Pressure Torsion
Experimental Evidence that the Onset of Mechanical Softening in Nanocrystalline Metals is Strain Rate Dependent
Deformation Behavior and Plastic Strain Localization of Nanostructured Materials Produced by Severe Plastic Deformation
Dislocation and Diffusion Deformation Mechanisms of Ultrafine Grained Materials
II. Ductility of Bulk Nanostructured Materials - Review and Modeling
Processing, Strength and Ductility of Bulk Nanostructured Metals Produced by Sever Plastic Deformation: An Overview
Ductility of Nanocrystalline Metals: Intrinsic or Extrinsic
An Analysis of Strength and Ductility of Ultrafine Grained Al Alloys
A Short Summary of Present Knowledge and some Experimental Observations on the Ductility of Sub-Microcrystalline Aluminium Alloys
Ductility of Bulk Nanocrystalline and Ultrafine Grain Iron and Steel
The "Ductilities" in Single Phase Steels from Usual to Nano-Scale Microstructures
Mechanical Properties of Ultrafine Grained Steels Processed by Large Strain-High Z Deformation - A Review
Measures of Ductility for UFG Materials Obtained by SPD
The Analysis of SPD Paradox by Computer Modeling Technique
A New Constitutive Model for Work Hardening Based on Gain Boundary Energy Density
III. Ductility of Bulk Nanostructured Materials - Experiments
The Influence of Work Hardening, Internal Stresses, and Stress Relaxation on Ductility of Ultrafine Grained Materials Prepared by Severe Plastic Deformation
Nanostructure Formation and Properties in Some Al Alloys after SPD and Heat Treatment
Effect of Ageing on Strength and Ductility of Ultrafine Grained Al 6061 Alloy
Structure, Strength and Ductility of As-Cast Al-Mg-Mn-Zr-Sc Alloys after Equal Channel Angular Pressing
Enhanced Ductility in Ultrafine-Grained Al Alloys Produced by SPD Techniques
An Investigation of Hardness and Microstructure Evolution of Heat Treatable Aluminum Alloys during and after Equal-Channel Angular Pressing
Factors Influencing Ductility in Ultrafine-Grained Metals Processed by Equal-Channel Angular Pressing
Microstructure Development and Ductility of Ultra-Fine Grained Mg-Gd Alloy Prepared by High Pressure Torsion
Texture, Microstructure, and Ductility of Mg-Al-Zn Alloy after Equal Channel Angular Pressing
Mechanical Properties of Nanocrystalline Cu and Cu-Zn Using Tensile and Shear Punch Tests
Strength and Ductility of Nanostructured Composites with Co-Deformable Components
The Effect of Grain Size and Strain Rate on the Tensile Ductility of Bulk Nanostructured Metals and Alloys
Strength and Ductility in Electrodeposited Nanocrystalline Nickel
Long-Range Ordering: An Approach to Synthesize Nanoscale Ni-Mo-Based Superlattices with High Strength and High Ductility
Enhancement of Tensile Ductility of Severe Plastically Deformed Two-Phase Zn-12Al Alloy by Equal Channel Angular Extrusion
Effect of Ppm Level Dopant on Ductility of Ultrafine Grained Gold Wires
Strategies for Improving Ductility of Cryomilled Nanostructured Titanium
The Effect of Severe Plastic Deformation on the Brittle-Ductile Transition in Low Carbon Steel
IV. Processing and Microstructural Evolutions
Multi-Scale Modeling of Texture Evolution in Beryllium and Zirconium during Equal Channel Angular Extrusion
Deformation Mechanisms of Single Crystals and Bicrystals Subjected to Equal-Channel Angular Pressing - Review
Processing Age-Hardenable Alloys by Equal-Channel Angular Pressing at Room Temperature: Strategies and Advantages
Nanostructured Ti2448 Biomedical Titanium Alloy
Recent Advances in the Development of Mechanically Alloyed Mo Silicide Alloys
Processing Dense Hetero-Nanostructured Metallic Materials for Improved Strength/Ductility Balance through High Strain Deformation and Electrical Current Assisted Sintering (ECAS)
Effect of Grain Size on the Superplastic Behavior of a Nanostructured Nickel-Based Superalloy
Nano-Grained Structure Induced by Mechanical Twinning during Multi-Directional Forging and the Mechanical Properties
Structure Refinement and Electropulse Current Effect on Mechanical Properties of Shape Memory TiNi Alloy
Effect of Grain Size on Defects Density and Internal Stresses in Sub-Microcrystals
V. Ductility of Thin Films and Nano-Layers
Ductility of Thin Metallic Films
Toward Understanding Size-Dependent Plasticity of Nanolayered Metallic Composites
Ultrahigh Strength and Ductility of Cu-Nb Nanolayered Composites
VI. Ductility of Metallic Glass and Composites
Improving Ductility in Nanostructured Materials and Metallic Glasses: "Three Laws"
Enhanced Work Hardening of Cu-Based Bulk Metallic Glass Composites by In Situ Formed Nano-Scale Heterogeneities
Room-Temperature Mechanical Characterization of Bulk Glassy and Partially Crystallized Zr63Al9.7Ni9.7Cu14.6Nb3 Alloys
Influence of HVOF Thermal Spray Process on the Microstructures and Properties of Fe-Based Amorphous / Nano Metallic Coatings
VII. Recovery and Grain Growth
A Simulation of the Abnormal Grain Growth in a Nano-Structural AZ31 Mg Alloy by Phase Field Model
Strain Enhanced High Strength Cu-Ag-Zr Conductors
by "Nielsen BookData"