Ductility of bulk nanostructured materials : special topic volume with invited peer reviewed papers only

著者

• Zhao, Yonghao
• Liao, Xiaozhou

書誌事項

Ductility of bulk nanostructured materials : special topic volume with invited peer reviewed papers only

edited by Yonghao Zhao, Xiaozhou Liao

（Materials science forum, v. 633-634）

Trans Tech, c2010

注記

Includes bibliographical references and index

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters BCI (WoS). Strength and ductility are two of the most important mechanical properties of structural materials, but this usually involves a trade-off, because of the fundamental inverse proportionality of these two features. Since the 1980s, bulk nanostructured materials have emerged as a new class of material having unusual structures and, as a result, have attracted increasing attention. Unfortunately, most bulk nanostructured materials still do not evade the strength-ductility trade-off dilemma, and usually have very poor ductility. The poor ductility of bulk nanostructured materials has indeed become a seemingly insurmountable obstacle to the widespread technological application of structural bulk nanostructured materials.

目次

Preface I. Deformation Mechanisms of Bulk Nanostructured Materials High-Rate Plastic Deformation of Nanocrystalline Tantalum to Large Strains: Molecular Dynamics Simulation Effects of Microalloying on the Mobility and Mechanical Response of Interfaces in Nanocrystalline Cu Molecular Dynamics Simulations of Nanocrystalline Nickel and Copper Revealing Different Failure Model of FCC Metals A Computational Model for Intergranular Fracture in Nanocrystalline and Ultra-Fine Polycrystalline Metals Crack Blunting through Lattice Dislocation Slip in Nanocrystalline and Ultrafine-Grained Materials In Situ Transmission Electron Microscopy Investigation of the Deformation Behavior of Cu with Nanoscale Twins Microstructural Origin of Superior Compressive Ductility of a Nanocrystalline Metal Overview of the Grain Size Effects on the Mechanical and Deformation Behaviour of Electrodeposited Nanocrystalline Nickel From Nanoindentation to High Pressure Torsion Experimental Evidence that the Onset of Mechanical Softening in Nanocrystalline Metals is Strain Rate Dependent Deformation Behavior and Plastic Strain Localization of Nanostructured Materials Produced by Severe Plastic Deformation Dislocation and Diffusion Deformation Mechanisms of Ultrafine Grained Materials II. Ductility of Bulk Nanostructured Materials - Review and Modeling Processing, Strength and Ductility of Bulk Nanostructured Metals Produced by Sever Plastic Deformation: An Overview Ductility of Nanocrystalline Metals: Intrinsic or Extrinsic An Analysis of Strength and Ductility of Ultrafine Grained Al Alloys A Short Summary of Present Knowledge and some Experimental Observations on the Ductility of Sub-Microcrystalline Aluminium Alloys Ductility of Bulk Nanocrystalline and Ultrafine Grain Iron and Steel The "Ductilities" in Single Phase Steels from Usual to Nano-Scale Microstructures Mechanical Properties of Ultrafine Grained Steels Processed by Large Strain-High Z Deformation - A Review Measures of Ductility for UFG Materials Obtained by SPD The Analysis of SPD Paradox by Computer Modeling Technique A New Constitutive Model for Work Hardening Based on Gain Boundary Energy Density III. Ductility of Bulk Nanostructured Materials - Experiments The Influence of Work Hardening, Internal Stresses, and Stress Relaxation on Ductility of Ultrafine Grained Materials Prepared by Severe Plastic Deformation Nanostructure Formation and Properties in Some Al Alloys after SPD and Heat Treatment Effect of Ageing on Strength and Ductility of Ultrafine Grained Al 6061 Alloy Structure, Strength and Ductility of As-Cast Al-Mg-Mn-Zr-Sc Alloys after Equal Channel Angular Pressing Enhanced Ductility in Ultrafine-Grained Al Alloys Produced by SPD Techniques An Investigation of Hardness and Microstructure Evolution of Heat Treatable Aluminum Alloys during and after Equal-Channel Angular Pressing Factors Influencing Ductility in Ultrafine-Grained Metals Processed by Equal-Channel Angular Pressing Microstructure Development and Ductility of Ultra-Fine Grained Mg-Gd Alloy Prepared by High Pressure Torsion Texture, Microstructure, and Ductility of Mg-Al-Zn Alloy after Equal Channel Angular Pressing Mechanical Properties of Nanocrystalline Cu and Cu-Zn Using Tensile and Shear Punch Tests Strength and Ductility of Nanostructured Composites with Co-Deformable Components The Effect of Grain Size and Strain Rate on the Tensile Ductility of Bulk Nanostructured Metals and Alloys Strength and Ductility in Electrodeposited Nanocrystalline Nickel Long-Range Ordering: An Approach to Synthesize Nanoscale Ni-Mo-Based Superlattices with High Strength and High Ductility Enhancement of Tensile Ductility of Severe Plastically Deformed Two-Phase Zn-12Al Alloy by Equal Channel Angular Extrusion Effect of Ppm Level Dopant on Ductility of Ultrafine Grained Gold Wires Strategies for Improving Ductility of Cryomilled Nanostructured Titanium The Effect of Severe Plastic Deformation on the Brittle-Ductile Transition in Low Carbon Steel IV. Processing and Microstructural Evolutions Multi-Scale Modeling of Texture Evolution in Beryllium and Zirconium during Equal Channel Angular Extrusion Deformation Mechanisms of Single Crystals and Bicrystals Subjected to Equal-Channel Angular Pressing - Review Processing Age-Hardenable Alloys by Equal-Channel Angular Pressing at Room Temperature: Strategies and Advantages Nanostructured Ti2448 Biomedical Titanium Alloy Recent Advances in the Development of Mechanically Alloyed Mo Silicide Alloys Processing Dense Hetero-Nanostructured Metallic Materials for Improved Strength/Ductility Balance through High Strain Deformation and Electrical Current Assisted Sintering (ECAS) Effect of Grain Size on the Superplastic Behavior of a Nanostructured Nickel-Based Superalloy Nano-Grained Structure Induced by Mechanical Twinning during Multi-Directional Forging and the Mechanical Properties Structure Refinement and Electropulse Current Effect on Mechanical Properties of Shape Memory TiNi Alloy Effect of Grain Size on Defects Density and Internal Stresses in Sub-Microcrystals V. Ductility of Thin Films and Nano-Layers Ductility of Thin Metallic Films Toward Understanding Size-Dependent Plasticity of Nanolayered Metallic Composites Ultrahigh Strength and Ductility of Cu-Nb Nanolayered Composites VI. Ductility of Metallic Glass and Composites Improving Ductility in Nanostructured Materials and Metallic Glasses: "Three Laws" Enhanced Work Hardening of Cu-Based Bulk Metallic Glass Composites by In Situ Formed Nano-Scale Heterogeneities Room-Temperature Mechanical Characterization of Bulk Glassy and Partially Crystallized Zr63Al9.7Ni9.7Cu14.6Nb3 Alloys Influence of HVOF Thermal Spray Process on the Microstructures and Properties of Fe-Based Amorphous / Nano Metallic Coatings VII. Recovery and Grain Growth A Simulation of the Abnormal Grain Growth in a Nano-Structural AZ31 Mg Alloy by Phase Field Model Strain Enhanced High Strength Cu-Ag-Zr Conductors

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB03870702
• ISBN:
  • 9780878493050
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zurich
• ページ数/冊数: xii, 723 p.
• 大きさ: 25 cm
• 分類:
  • DC22 : 620.5
• 件名:
  • LCSH : Nanostructured materials -- Ductility
  • LCSH : Bulk solids
• 親書誌ID:
  • BA00294222