Mechanical properties and performance of engineering ceramics and composites V : a collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, January 24-29, 2010, Daytona Beach, Florida
著者
書誌事項
Mechanical properties and performance of engineering ceramics and composites V : a collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, January 24-29, 2010, Daytona Beach, Florida
（Ceramic engineering and science proceedings, v. 31,
American Ceramic Society , John Wiley & Sons, c2010
- : hbk.
大学図書館所蔵 件 / 全2件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Volume editors: Sanjay Mathur, Tatsuki Ohji
Includes bibliographical references and author index
内容説明・目次
内容説明
This volume is a compilation of papers presented in the Mechanical Behavior and Performance of Ceramics & Composites symposium during the 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC) held January 24-29, 2010, in Daytona Beach, Florida.
The Mechanical Behavior and Performance of Ceramics & Composites symposium was one of the largest symposia in terms of the number (>100) of presentations at the ICACC'10. This symposium covered wide ranging and cutting-edge topics on mechanical properties and reliability of ceramics and composites and their correlations to processing, microstructure, and environmental effects. Symposium topics included:
Ceramics and composites for engine applications
Design and life prediction methodologies
Environmental effects on mechanical properties
Mechanical behavior of porous ceramics
Ultra high temperature ceramics
Ternary compounds
Mechanics & characterization of nanomaterials and devices
Novel test methods and equipment
Processing - microstructure - mechanical properties correlations
Ceramics & composites joining and testing
NDE of ceramic components
目次
Preface ix
Introduction xi
PROCESSING
The Effects of Heating Rate on Magnesia Doped Alumina Prepared bySPS 3
B. Apak, G. Goller, F. C. Sahin, and O. Yucel
Effect of Coke Calcination Temperature on the Processing of Reaction Bonded Silicon Carbide 9
Rodrigo P. Silva, Claudio V. Rocha, Marysilvia F. Costa, and Celio A. Costa
Pressureless Sintering of Mullite-Ceria-Doped Zirconia-Silicon Carbide Composites 15
Barry A. Bender, Michael Vick, and Ming-Jen Pan
The Role of Carbon in Processing Hot Pressed Aluminium Nitride Doped Silicon Carbide 27
N. Ur-rehman, P. Brown, and L. J. Vandeperre
CHARACTERIZATION
Microstructure and High-Temperature Properties of Si-B-C-N MA-Powders and Ceramic 37
Yu Zhou, Zhi-Hua Yang, De-Chang Jia, and Xiao-Ming Duan
Influence of Water Quality on Corrosion of Multi-Oxide Engineering Ceramics 51
Marju Mannila and Antti Hakkinen
The Effect of Load and Temperature on Hardness of ZrB2 Composites 59
J. Wang, F. Giuliani, and L. J. Vandeperre
Nano-lndentation Hardness Measurements as a Characterization Technique of SiC and Pyrolytic Carbon Layers of Experimental PBMR Coated Particles 69
I. J. van Rooyen, E. Nquma, J. Mahlangu, and J. H. Neethling
High Temperature Mechanical Loss of Nanostructured Yttria Stabilized Zirconia (3Y-TZP) Reinforced with Carbon Nanotubes 79
Mehdi Mazaheri, Daniele Mari, Robert Schaller, and Zhijian Shen
The Influence of Nanosize Carbon Concentration on Mechanical Properties of RBSIC 87
Cristiane Evelise Ribeiro da Silva, Rosa Trejo, Sanghoon Shim, Edgar Lara-Curzio, and Celio A. Costa
Si/SiC and Diamond Composites: Microstructure-Mechanical Properties Correlation 97
S. Salamone, R. Neill, and M. Aghajanian
Mechanical Properties and Failure Criterion of Silicon-Based Joints 107
L. M. Nguyen, O. Gillia, Emmanuelle Riviere, and Dominique Leguillon
Effect of Various SnAgTi-Alloys and Laser Induced Texturing on the Shear Strength of Laser Brazed SiC-Steel-Joints 119
I. Sudmeyer, M. Rohde, T. Furst
Characterization of Poled Single-Layer PZT for Piezo Stack in Fuel Injection System 127
Hong Wang, Tadashi Matsunaga, and Hua-Tay Lin
Thermal Tomographie Imaging for Nondestructive Evaluation of Ceramic Composite Materials 137
J. G. Sun
A More Comprehensive NDE: PCRT for Ceramic Components 145
Leanne Jauriqui and Lem Hunter
FIBER REINFORCED COMPOSITES
Microstructure and Thermodynamic Descriptions of SiC-Based Ceramic Fibers 159
Geraldine Puyoo, Georges Chollon, Rene Pailler, and Francis Teyssandier
Static Fatigue of Multifilament Tows at High Temperatures above 900 DegreesC 173
A. Laforet and J. Lamon
3D Multiscale Modeling of the Mechanical Behavior of Woven Composite Materials 185
G. Couegnat, E. Martin, and J. Lamon
Mode I Interlaminar Fracture Toughness Testing of a Ceramic Matrix Composite 195
G. Ojard, T. Barnett, M. Dahlen, U. Santhosh, J. Ahmad, and R. Miller
Comparative Study of Tensile Properties of Uni-Directional Single-Tow SiC-Matrix Composites Reinforced with Various Near-Stoichiometric SiC Fibers 207
Kazumi Ozawa, Yutai Katoh, Edgar Lara-Curzio, Lance L. Snead, and Takashi Nozawa
Foreign Object Damage in an N720/Alumina Oxide/Oxide Ceramic Matrix Composite 221
Sung R. Choi, David C. Faucett, and Donald J. Alexander
Static Contact Damage in an N720/Alumina Oxide/Oxide Ceramic Matrix Composite with Reference to Foreign Object Damage 233
David C. Faucett, Donald J. Alexander, Sung R. Choi
Effects of Environment on Creep Behavior of NEXTEL (TM)720/ Alumina-Mullite Ceramic Composite with +/-45 Degrees Fiber Orientation at1200 DegreesC 245
M. Ozer and M. B. Ruggles-Wrenn
Fatigue Behavior of an Oxide/Oxide CMC under Combustion Environment 261
Shankar Mall and Andrew R. Nye
EROSION AND WEAR
Particle Erosion Wear Behavior of New Conceptual SiC/SiC Composites 275
Min-Soo Sun, Tatsuya Hinoki, and Akira Kohyama
Threshold of Ring Crack Initiation on CVD-SiC under Particle Impact 285
Min-Soo Suh, Sang-Yeob Oh, Tatsuya Hinoki, Chang-Min Suh, and Akira Kohyama
Advanced Ceramic-Steel Pairings under Permanent Slip for Dry Running Clutch Systems 295
Albert Albers and Michael Meid
Development and Validation of Lubricated Multi-Disk Clutch Systems with Advanced Ceramics 309
Albert Albers, Johannes Bernhardt, and Sascha Ott
MODELING
Virtual Testing and Simulation of Multiple Cracking in Transverse Tows of Woven CMCs 319
Pierre Pineau, Guillaume Couegnat, and Jacques Lamon
Isothermal ChemIcal Vapor Infiltration Modeling by Random Walks in CMT 3D Images at Two Scales 329
G. L. Vignoles, I. Szelengowicz, W. Ros, C. Mulat, and C. Germain
Adsorption and Surface Diffusion of Oxygen on 3C and 2H-SIC Polytypes: Numerical Studies 341
Junjie Wang, Litong Zhang, Qinfeng Zeng, and G. L. Vignoles
Effective Surface Recession Laws for the Physico-Chemical Ablation of C/C Composite Materials 351
G. L. Vignoles, J. Lachaud, Y. Aspa, and M. Quintard
Model of the Influence of Damage on the Thermal Properties of Ceramic Matrix Composites 361
Jalal El Yagoubi, Jacques Lamon, and Jean-Christophe Batsale
Author Index 373
「Nielsen BookData」 より