Advances in composites : selected, peer reviewed papers from the 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), 6-8 November, 2010, Shenzhen, China

著者

• International Conference on Advances in Materials and Manufacturing Processes
• Bu, Jinglong
• Jiang, Zhengyi
• Jiao, Sihai

書誌事項

Advances in composites : selected, peer reviewed papers from the 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), 6-8 November, 2010, Shenzhen, China

edited by Jinglong Bu, Zhengyi Jiang and Sihai Jiao

（Advanced materials research, v. 150-151）

Trans Tech Publications, c2011

• :[set]
• Part 1
• Part 2

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

This work, in two volumes, is a collection of 365 peer-reviewed papers which describe the latest advances made in the understanding of micromechanical characterization, stress, failure, mechanical properties of composites and nanocomposite multilayers, durability and performance analysis, failure mechanisms, non-destructive evaluation, metal-matrix and oxide/oxide composites.

目次

Sponsors, Committees, Preface Wood-Polymer Composite Prepared by In Situ Synthesis of Copolymer within Wood and its Dimensional Stability Flexural Behaviors of RC Beams Strengthened with Post-Poured UHTCC Layer The Study of Several UV Curable Polyurethane Acrylates The Relationship between Residual Stress and Resistivity of Au/NiCr/Ta Multi-Layered Metallic Films by Magnetron Sputtering Combinations of Various Self-Consolidating Concrete Test Methods and Workability Responses Effect of Substituents and Solvents on Phenol-Isocyanate Urethane Reaction Parameter Determination of Discrete Element Model of Conditioned Soil by Genetic Neural Network Improving the Performance of Intumescent Flame Retarded Polypropylene with Nano-ZrO2 The Study of Sputtered Silver-Based Low-Emissivity Coating on Glass First-Principles Calculation of Elastic Properties of TiB2 and ZrB2 Preparation and Performance Research of Thermosetting Heat-Reflective Coating for Asphalt Pavement Erosion-Resistant PVD ZrAlCuN Coating for Titanium Alloy Mechanical and Shielding Properties of an As-Cast New Pb-B Shielding Composite Materials Physical and Electrochemical Properties of Layered Li[Ni1/3Co1/3Mn1/3]O2 Cathode Materials Effects of RE on the Microstructure and Mechanical Properties of Electrodeposited Copper Foil Structure, Electrical and Optical Properties of Ni-Doped Cu3N Films Deposited by Radio Frequency Magnetron Sputtering Crack Pattern Evolution and Complexity of Brittle Failure of Rock Gd2O3 Added Glass-Ceramic Composite for the Improvement of Energy Storage Density through Controlled Crystallization Study on the Reaction Mechanism of ( -Al2O3+TiB2+TiC)/Al Composites Fabricated by Al-TiO2-B4C System Similarity of Deuterium Absorption at Room Temperature for Different Ti-Zr-Ni Quasicrystals Self-Assembled Stratified Structure in Polyalkylthiophene-6 and Polyvinylcarbazole Blend Film Mathematical Model for Temperature Distributions of Work Roll in Aluminum Strip Cold Rolling Research on the Tribological Properties of SF Polymer Water-Lubricated Bearings Morphological Properties of Poly(Trimethylene Terephthalate)/Maleated Styrene-Butylene-Co-Ethylene-Styrene/Organoclay Ternary Nanocomposite Effect of Film Thickness on Structure and Property of Pb(Zr0.53Ti0.47)O3 Thin Film Transformation Induced Plasticity Behaviors of TRIP Steels with Different Heat Treatment Processes Study on Factors Impact on Performance of Ceramisite Made of Shale and Sludge Study on Choice of Reference Planes for 3D Machined Surface Roughness of SiCp/Al Composites during High Speed Milling Process Analysis on the Microstructure Characteristics of Steel-Slag Based Ceramics Preparation and Characterization of Poly(Lactic Acid)/Ethylene Glycidyl Methacrylate Copolymer Blends Thermo-Physical Properties of Copper Matrix Composites Reinforced with 3D-SiC Network Chiral Resolution of Racemic (+/-)-1,1'Bi (2-Naphthol) by Use of Molecularly Imprinted Polymers Structural Transformation of Aluminum Nanowires during Solidification Dynamic Properties of Lead Rubber Bearings and its Seismic Isolation Applications in High-Speed Railway Bridge Study on Inorganic Phase Change Materials Encapsulated by Rice Straws First-Principles Calculations of Transition Metal Nitrides TiN and NbN Research on Blue-Algae Removal from Eutrophication Water by Modified Clay Wear Mechanism Analysis and Microstructure of Vanadium Carbide Coating by Thermal Diffusion Process Dynamic Behavior and Stability of Prestressed Arch-Supported Reticulate Shell Structure Research on the Shielding Performance of Electromagnetic Shielding Clothes Axial Compression Experimental Research of RPC Filled Steel Tube Columns Trisiloxane Surfactants Technology Optimization and Impact of Surface Tension Preliminary Study on Natural Villous Bamboo Fiber Medium Density Fiberboard (MDF) Structure and Mechanical Properties of (Cu, Ti) - Binary Metal Doped Diamond-Like Carbon Films Study on the Morphology and Properties of Nylon11/Montmorillonite Nanocomposites Ductility Evaluation of Reinforced UHTCC Structural Members Compressive Buckling of Composite Plates with a Delamination Steady Thermal Stresses in a Ceramic/FGM/Metal Composite EFBC Plate under Convective Heat Transfer Boundary Experiment Study on the Frost Resistance of Steel Fiber Reinforced Concrete Aging Effects on Pavement Performance of Asphalt Mortar Study and Preparation of Ti-Doped ZnO Thin Films by Using Chemical Bath Deposition Room-Temperature Electrical Conductivity Property of Si3N4/TiN Composite Ceramics A New Regeneration and Restoration Technology of Asphalt Pavement Enhancing the Built Environment by Green Roofs Effect of Electric Pulse Modification on Alloy Layer of Hot Galvanizing Coatings Nonlinear Seismic Response Analysis Method for Steel Mega-Frame Structures Based on Improved Finite Segment Element Plastic Zone Model Frictional Brake Material Reinforced with Sisal Fiber and Glass Fiber Hybrid Prediction on Autogenous Shrinkage of Self-Consolidating Concrete Low Temperature Fired Ferrite/Ceramic Composite Materials and their Permeability Spectra Mechanical Performance of Straw Fiber Reinforced Desulfurization Gypsum Composite Materials Preliminary Research on Pb-Sn-Al Laminated Composite Electrode Materials Applied to Zinc Electrodeposition Grafting Milk Protein on Polyester Fabric Encased with Hydroxide and Wearability of Polyester Fabric Grafted Milk Protein Study of Surface Modification of Recycled Aggregate and Interfacial Zone Microstructure of the Concrete The Pervaporation Performance of Polyimide-Block-Polyethylene Glycol Membranes for Gasoline Desulphurization: Effect of PEG Groups Preparation and Application of Hybrid SBS Bipolar Membrane in Electro-Generation of HPAc and Succinic Acid Damage Theoretical Analysis of 2.5D C/SiC Composites under Tensile and Shear Loading Fouling Resistance of PVDF-Fabric Composite Membrane in Membrane Distillation Desalination Synthesis and Photovoltaic Properties of Fluorene-Based Copolymers Response of Concrete Beams Partially Prestressed with External Unbonded Carbon Fiber-Reinforced Polymer Tendons Study on Low Temperature Sintering Behaviour of CaO-B2O3-SiO2 Glass Ceramics Preparation and Basic Mechanical Properties of Self-Compacting Concrete Sandwiched Wood-Plastic Composites with Flame-Retardant Skin Migration of Cations in Mortar under an Electrical Field Controlled by a Constant Current Density Vibration Research of Gear Box in H5 Mill for Alloy Bar's Rolling Process Study on Application of Modified Polyethylene in Preparation of Wood-Plastic Composites Synthesis, Characterization and Thermal Analysis of Rod-Shaped Polyaniline-Barium Ferrites Nanocomposites Hydrothermal Synthesis and Adsorption Proprieties of Titania-Active Carbon Composites Crack Prevention-Based Selection Method for Thickness of L-Shaped Floorslab without Beam Sulfonation Surface Treatment of Plasma Alkali Secondary Lithium Battery Separator Effect of Compatibilizing Agent on Mechanical and Thermal Properties of Wood-Plastic Composites Research on Swirling Cavitation Degradation and its Application in Wastewater Treatment The Moment-Curvature Relation of SRC Column Based on the Fiber Model Method and its Influencial Factors Analysis Hydration Behavior of Metakaolin-Cement Pastes with Different Contents of Reactive Aluminous at Early Age Treatment Materials for Spalling on Loess Slope Thermal Stability and Dynamic Mechanical Behavior of Nano-SiO2/Phenol Formaldehyde Resin Nanocomposites Research on Pavement Characteristics of Epoxy Resin and Rubber Modified Asphalt Load Carrying Capacity Analysis of Multi-Spiral Reinforced Concrete Column Tool Materials Design and the Sintering Optimization Based on Interface Strengthening Theory Fabrication of ACF/CNT Composites by CVD Method Control Growth of Pyrocarbon by Chemical Vapor Infiltration An Experimental Study on Effect Factors of Post-Installed Bar in Concrete Anchorage and Bonding Performance Thermal Conductive Composite Prepared by Carbon Coated Aluminum Nanoparticles Filled Silicone Rubber Study on Performance of Epoxy Asphalt Concrete Applied in the Deck Pavement of Pingsheng Steel Bridge Thermal Properties and Flame Retardancy of Wood Treated with a Series of Stannates Effect of Technical Parameters on Preparing for Vanadium Nitride The Engineering Properties Comparative Study of Wetlands Soft Soil and Soft Soil of other Genesis The Growth, Surface Topography and Curie Temperature in Ni Thin Films: Kinetic Lattice Monte Carlo Simulation Preparation and Performance Test of Composite Clinoptilolite Filter Material Multi-Objective Optimization of a Wedged-Ring Joint Structure The Mechanism of Antibacterial Activity of Copper and Cerium-Loaded White Carbon Black Seismic Behavior Analysis on the Steel Cold-Formed in Modular House Experimental Study on Damage Diagnosis of Reinforced Concrete Beam with Acoustic Emission Synthesis and Characterization of Modified Zn-Antibacterial White Carbon Black Cement-Based Composite with Carbon Nanotubes Reinforcement Tailored for Structural Damping Effect of Annealing Temperatures on the Microstructure of CuInS2 Thin Film by One-Step Electrodeposition Development of a Low Yield-Strength Ratio and Fire Resistant Steel for High-Rise Building Tensile Properties of Aluminum Matrix Composites Reinforced with Submicron SiC Particles Study on Resistance to Chloride Ion Penetration of High Performance Concrete for High Speed Railway Bridge Pile Smart Green Composite: Effect of Cuttlebone Particle on the Mechanical Properties of NR Vulcanizates Study on Bonding Properties of Birch with API Adhesive A Research on Performance of Polystyrene-Aerated Concrete Wall Materials Preparation of Exfoliated Polyethylene/Clay Nanocomposites at High Clay Content Hydrophilic Modification of PES Hollow Fiber Membrane via Surface-Initiated Atom Transfer Radical Polymerization The Seismic Behavior of Strengthened Joints between Concrete-Filled Steel Tubes and Beams Based on the Numerical Simulation Technology Study on Vibration Alleviating Properties of Different Fiber Reinforced Polymer Concrete Fabrication and Performance of Al-NaI Radioactive Transmutation Targets Effect of Material Properties on Plastic Shrinkage of Ultra-Fine Sand Pumping Concrete Evaluation on Performance of Functional Polymer Enchancement of Mechanical Properties in BaTiO3 Ferroelectric Thin Films Study on Frost-Resistant Experiments of Concrete for High Speed Railway Pile Foundation Protection The Research on Influencing Factors of Polymer Flooding Interaction and Enthalpy Recovery Behavior in Polymer Blends of Polysulfone and Carboxylated Polysulfone Preparation and Performance Study of Reflection Heat Preservation Insulation Coating Effect of Rosin Ester on Water-Resistant Adhesion Oximized RTV-1 Silicone Rubber Sealant Status and Development Trend of Energy-Saving Wall Materials in Cold Areas Effect of Density on Physical and Mechanical Properties of Reconstituted Small-Sized Bamboo Fibrous Sheet Composite Organic EL Devices Based on Pyridine-Containing Compounds A Novel Green Tape with High Solid Content Prepared by Aqueous Tape-Casting Study on the Properties of Epoxy Thermosets Cured by ImHBPs under Lower Temperature Effect of Thermal Conduction on Tribological Properties of Polytetrafluoroethylene Based Composites A Study on 3D Isolation Effect on High-Rise Building Subjected to Near-Field Ground Motions Study on CH4 Conversion over Ce-Zr Solid Solution Supported Nano Pt-Ni Bimetal Catalysts: Preparation and Characterization of Ce-Zr Solid Solution The Method of Producing Nanomaterials and Melt Blown Nonwovens Composites Effect of Deformation and Annealing on Microstructure and Properties of Composite Cu-10Fe-3Ag Wire Erosion Mechanisms of Hydraulic Concretes under High-Speed Abrasive Water Jets at Different Impact Angles Preparation of Cobalt and Copper Superfine Composite Oxides and Magnetic Property Effect of Microstructure on Transport Properties of Nano-Polycrystalline La0.7Sr0.3MnO3-D Films Lower Branched Liquid Crystalline Polyester POSS Used as Collaborative Modifier for Epoxy Resin Preparation and Properties of Poly Methyl Methacrylate/Lanthanum Hexaboride Nanocomposites Photoluminescence of Eu3+-Doped TiO2 Thin Films Prepared by Sol-Gel Method Novel Cementious Materials from Industrial Solid Waste for Silt Soil Solidification Research on Earthquake Resistant Materials in Mountain Tunnels Crossing Fault Application Study of Nanoparticle-Enhanced Phase Change Material in Ceiling Board Studies on the Properties of Epoxy Resins Modified with Novel Liquid Crystalline Polyurethane Toughness Properties of Basalt/Carbon Fiber Hybrid Composites Ultimate Strength Analysis of Ship Hulls of Continuous Basalt Fiber Composite Materials Influence of Different Sintering System on the Formation of Tricalcium Aluminate Research of Properties and Preparation on Zero-VOC Acrylic Elastic Emulsion The Applications of Concrete Cut-Off Wall in the Reinforcement of the Earth Dam Experimental Study on Utilization FGD Byproducts in Building Bricks Preparation and Microscopic Analysis of Polyurethane Elastomer Made by Salix psammophila The Mechanical Properties of Modified Attapulgite Reinforced Nature Rubber and Styrene-Butadiene Rubber Nanocomposites Experimental Study on Mechanicial Properties of TRC Plate The Effect of IrO2 Doping on the Structure and Magnetic and Magnetotransport Properties of La0.7Ca0.2Sr0.1MnO3 Composite Research on Impact Behavior of Reactive Powder Concrete Study on the Hydration Micro-Structure and Properties of Complex Cementitious Systems Experimental Study on Salt Solution Ingress into Concrete under Capillary Siphon Effect Preparation and Mechanical Properties of Nano-SiCp/Mg Composites by Ultrasonic Dispersion Manufacturing and Mechanical Responses of Ti/APC-2 Nanocomposite Cross-Ply and Quasi-Isotropic Laminates at Elevated Temperature Tribological Behaviors at High Load of MoSX/Au Films in Vacuum New Tin-Functionalized Integrated Rubber for High Performance Green Tire Tread Effect of CCWC on the Self-Healing Action and the Microstructure of Cement-Based Materials Effects of CeO2-Rich Mixed Rare Earth on the Mechanical Properties of Al2O3-Mullite Based Foam Ceramics Cure Kinetics and Thermal Property of UV-Curable Polyester Nanocomposites Coating Modified with MAP-POSS Experiment Study on Mechanics and Pore Structure of Steel Fibre Reinforced Concrete Stability and Ageing of Plasma Treated Wood/Polyethylene Composites Surfaces Rheological Properties of PTT/POE/OMMT Composites Preparation and Properties of the PTT/ABS/SCF Composites Experimental Study on Precracked RC Beams Strengthened with Externally Bonded CFRP Sheets Investigation on Microstructure and Properties of Heavily Cold Rolled Cu-Fe Alloys Structure and Antibacterial Activity of Copper-Carried Zirconium Phosphates A Novel Nanocomposite Based on Recycled Poly(Ethylene Terephthalate)/ABS Blends and Nano-SiO2 The Experimental Studies on the Prepartion of Steel Slag Cement by Gas Quenching Steel Slag In Situ SiCp/Al-4.5 wt.% Cu Composites Obtained by Direct Reaction Synthesis Thermal Stresses in a ZrO2/FGM/Ti-6Al-4V Composite ECBC Plate with Temperature-Dependent Material Properties Thermal and Mechanical Properties of Boron-Containing Bisphenal-A Formaldehyde Resin Composites Wear Behavior of Fe-Based Coating Fabricated by Plasma Thermal Spraying Utilization of CFB Fly Ash in Eco-Cement: Mechanical Properties and Microstructural Analysis Thermodynamics of Solvent Extraction of Perrhenate with N235 at High Concentration A Study of Numerical Simulation and Experiment Investigation on ECMM Processing of PRMMC Effects of PHZ and TiO2 on Image Properties of Silver Film Based on Photothermographic Materials The Structural and Morphology of (La0.7Sr0.3)MnO3 Thin Films Prepared by Pulsed Laser Deposition Study on Adsorption Mechanism and Dehumidification Property of Composite Desiccant In Situ Growth of Hydrophobic TiO2 on Calocedrus macrolepis Kurz Wood Surface Using a Cosolvent-Controlled Hydrothermal Method Fabrication of ZnO Nanodot Arrays by Sol-Gel within AAO Template Relation between Interfacial Strength and Impact Properties of UHMWPE/LLDPE Laminates The Experimentation and Imitation Study on Flow Field of Coherent Jet Experimental Study on Dynamic Collision Characteristics of Concrete Study on Network Structure C-Cu Composites of Pantograph Slide Plates The Electrochemical Behavior and Microstructure of Chromium-Free Passivation Film on Galvanized Steel Preparation, Characterization and Thermal Properties of Polyacrylonitrile/Alpha-Zirconium Phosphate Nanocomposites by Gelation/Crystallization Cyclic Voltammograms of Chlorophenol Oxidation on Boron-Doped Diamond Electrode Effects of Thermal Cycling and Freezing after Water Absorption on Tensile Properties of Green Composites Study on Curing Behavior of Low Molar Ratio Urea-Formaldehyde Resins with Different Curing Agents Study on Properties of Thin Layer Skid-Resistance Material in Tunnel Paving Effect of Elements on Hot Tearing of Directionally Solidified Ni-Based Superalloys Tribological Behavior of La2O3 Particulate Reinforced Copper Matrix Composites The Geometric and Electronic Structures of Fen-1Si(n=2-7) Clusters Synthesis of Latent Curing Agent for Epoxy Resin Improved Photoluminescence from Ar+ and N+ Ions Co-Implanted Porous Silicon Compressive Strength and Splitting Tensile Strength of Polyvinyl Alcohol Fiber Reinforced Ultra High Strength Concrete (PFRC) Friction and Wear Behaviour of Al2O3 Particulates Reinforced Al-Mn Alloy Matrix Composites Crack Resistance of Connections of Cross Shaped Steel Encased Ultra High-Strength Concrete Column to RC Beam under Cycle Loads Water Permeability of Polyvinyl Alcohol (PVA) Fiber Reinforced Cementitious Composites Experimental Study on Flexural Strength of Polyvinyl Alcohol (PVA) Fiber Reinforced Cementitious Composites Preparation of EG-g-MWCNTs and Antistatic Poly(Ethylene Terephthalate) Nanocomposites Analysis of Effection of the Prestressing Force on Shear Lag in Curved Box Girder Prediction of the Strength Development of Fly Ash Concrete The Preparation of Coatings with Codepositon Plating on A3 Steel and its Corrosion Resistance Factor Analysis of Cracks Generated in 22CrMoH Steel Gear Effect of Substrate Temperature on the Haze and Properties of SnO2: F Thin Film Coated on Glass (FTO) by Spray Pyrolysis Process A Hot-Melt Thermosetting Phenolic Prepreg and its Composites Modeling Corrosion Property of High Chromium Cast Iron under H3PO4 Medium Condition Using Artificial Intelligence Regeneration of IMAC-Cu Proteinchip by Borate Eluent The Research on the Mechanical Property of CBF/PP Composite Board Effect of Sintering Temperature on the Properties of Sludge Ceramics and Fly-Ash Ceramics Nanocrystalline NiO Thin Film Prepared by Sol-Gel Process Preparation and Properties of Al2O3 Ceramic Reinforced Mo-Based Composites by Al(NO3)3 Precursor Tearing Analysis of Coated Fabrics under Mono-Axial Tensile Stresses Study and Application on Quick Repair Materials for Concrete Pavement Study of the Bonding Property between Flanges and Web Plates of Wood I-Joist Effect of the Simplifcation to Structural Systems on Nonliner Performance of Tall Buildings Design and Choose Durability Assessment Parameter of Concrete in Salt Soil Region Effect of Various Nanoparticles on Friction and Wear Properties of Glass Fiber Reinforced Epoxy Composites Microstructure and Thermal Properties of Diamond-Al Composite Fabricated by Pressureless Metal Infiltration Preparation and Properties of Rigid Polyurethane-Imide Foams Preparation of Rigid Polyurethane-Imide Foams Kinetic Study on the Preparation of Poly(Phenylene Sulfide Ether) Properties of Particleboard Manufactured with Modified Urea-Formaldehyde Resin The Effect of Thermal Aging on Tensile Strength of Three-Dimension and Five-Direction Braided Carbon Fiber/BMI Composites The Influence of Purification of Ethyl Acrylate on the Properties of Cement Matrix Decoloration of Methyl Orange by Mineral-Catalyzed Fenton-Like System of Natural Schorl and H2O2 A New Formula of Voids in the Mineral Aggregate (VMA) of Hot Mix Asphalt (HMA) and its Application Carbon Nanotubes Reinforced Aluminum Matrix Composites by High-Energy Ball Milling Preparation and Test of Polyurethane Foam Composites with Alkali Lignin/Renewable PUF Effect of Silane Concentrations on Mode I Interlaminar Fracture of Woven Silk/Epoxy Composites Experimental Study of Elastic Modulus of Crumb Rubber Plastic Concrete Performance Evaluation of Large Stone Porous Asphalt-Rubber Mixture The Investigation of Ultrahigh Pressuer Sintering of Cubic Boron Nitride with the Binding Agent of Si3N4 Preparation and Characterization of LPAAM Superabsorbent Composite Strategic Thinking of Construction Material Based on Ecology Effect of Dry-Wet Circulation and Temperature Change on Properties of Polyurea Coatings Mechanical Property Effect of Na2SO4 on Cement-Reclaimed Asphalt Pavement Mixture Effect of Super Slag Powder on Pore Structure and Compressive Strength of RPC Preparation and Analysis of Kaolinite Intercalated by Potassium Acetate Technology of Processing Mineral Superfine Powder Used in High Performance Concrete by DHM Grinder and its Characteristics Experimental Research on Shape Retention of Tackified Woven Fabrics Formation Mechanism of AlZrO and ZrAlON Phases in Al-ZrO2-N2 Systems Kinetics and Mechanism of Mo(VI) Extraction with Trialkyl Amine Using a Constant Interfacial Cell with Laminar Flow Discovery of Zr-Al-Ca-O Phase in Zr-Al-Ca-O-N Composites and its Synthesis The Mechanisms of Epoxy Latex Coatings Curing at Ambient Temperature Comparison with Solvent-Type Ones Quantum Chemical Calculation of Propylene Oxide Ring-Opening Esterification Mesoporous Carbon with CNT Skeleton and their Electrochemical Properties The Effect of the pH Value of Wood on the Curing Reaction of Low Toxic Urea-Formaldehyde Resin Characterization and Photocatalytic Properties of Porous BiVO4-SiO2 Composites Synthesis and Characterization of Gomuti-Graft-Polyacrylamide Flocculants High-Performance Rust Converter with a Formula Based on Polyphosphoric Acid and Tannic Acid Flexural Vibration in a Ternary Locally Resonant Phononic Crystal Thin Plate with Defects Effect of RE on the Mechanical Properties of 7075 Al Alloy First Principles Calculations of Optical Properties of Cu3N and Cu4N Preparation and Properties of Silicon-Corundum-Silicon Nitride Composites Development of IPMC Actuator for Flapping Motion of Dragonfly Effects of Vacuum Annealing on Microstructure and Magnetostriction of TbDy-Fe GMFs Experimental Study on Improving Abrasion Resistance of Sizing Crusher Tooth Preparation and Characterization of the Tri-Channel Hollow Fiber Charged Mosaic Membrane Shear Reinforcement of Air Plasma for GFRP-Wood Composite Microstructure and Properties of Fe/Al2O3 Gradient Coatings on Steel Substrate Toughening of Thermosetting Resins with Thermoplastic Polyimide: Thermal, Morphological, and Mechanical Characterization Comparison of Hollow-Porous and Solid Carbon Fibers as Microwave Absorbents Creep Modeling for Concrete Filled Steel Tubular Members Compressed with a Large Eccentricity Monte Carlo Simulation of Magnetic Properties of Multilayer with Amorphous Surfaces Simulation of Fabrication for Single-Phase Al2O3 Ceramic Tool Materials at Different Fabrication Temperature Effect of Arc Discharge on Friction and Wear Behaviors of Stainless Steel/Copper-Impregnated Metalized Carbon Couple under Electric Current Experimental Study on Flexural Fatigue Property of Ultra-High Toughness Cementitious Composites Experimental Research on Residual Strength of Recycled Aggregate Concrete under Compressive Fatigue Loading Sputter-Deposited Nano-Metal Films in a Short Period for Electromagnetic Shielding Textiles Preparation and Electrochemical Performance of SnO2/Graphite/Carbon Nanotube Composite Anode for Lithium-Ion Batteries Influence of Substrate Temperature on Silicon Nitride Films Deposited by R.F. Magnetron Sputtering Effect of Beeswax on Functional and Structural Properties of Soy Protein Isolate Films Experimental Study on Effects of Temperature on Characteristic Parameters of CFRP-Confined Concrete Prisms HDPE/UHMWPE Blown Films Modified by POE and CaCO3 Investigation of Microstructure and Property of Fe3Al/Al2O3 Composites Cure and Dynamic-Mechanical Behaviors of Vinyl Ester Resinfilled with Multi-Walled Carbon Nanotubes Nanoparticle/Epoxy Nanocomposites: Impact, Flexural and Thermal Properties The Preparation of TiO2 Film Loaded on Fiberglass Mesh and the Experimental Study on Its Photocatalytic Properties Nondestructive Testing of Mechanical Properties of Pine Laminated Veneer Lumber Microstructure and Properties of Fe-Based Laser Cladding Coatings Reinforced by In Situ Synthesized Multiphase Ceramic Particles Study on the Processing Technology of Bamboo Mat/Bamboo Particle Composite Board Effects of Different Pretreatments of Wood Fiber on Mechanical Properties of Biodegradable Composite A Simple Experimental Method to Simulate the Fracture and Faults in Earthquakes Analysis on Dynamics Characteristics of ICPF for Micro-Robot Novel Antibacterial Nanofibers of Chitosan and Polyurethane Prepared by Electrospinning Investigation on the Property and Air Void Structure of Foamed Cement-Fly Ash-Steel Slag Concrete Effect of Zr on Thermal Stability of Cu-Fe In Situ Composite Preparation and Properties of PLLA-co-bis A/VMT Nanocomposites Effect of Gd Substitution on the Dielectric Properties and Magnetoelectric Effect of BiFeO3 Study on Synthesis of Methyl Methacrylate/Styrene Copolymer by Suspension Polymerization Synthesis and Thermal Property of Poly(Allylamine Hydrochloride) Coated Hydrophilic Thin Film on Glasses Using Freeze Drying-Assisted Sol-Gel Technique for Self-Cleaning Building Materials Anti-Shear Reliability Analysis of Existing Pretension Prestressed Concrete Beam Bridges in the Corrosion Environment with Acid Rain Residual Deformation Behavior of Reinforced Rock-Fill Materials Study on Synthesis and Thermal Property of Polyvinylamine Synthesis and Thermal Property of Linear Chloromethylated Polystyrene Theory and Experiment of Isotropic Electromagnetic Beam Bender Made of Dielectric Materials Research on the Strength Properties of the Magnesium Phosphate Cement (MPC) under the Sub-Zero Temperature Environment Study on the Performance of Buckling-Restrained Brace with Low Yield Strength Steel Fabrication and Mechanical Characterization of nmSiO2/EP Composites by Shock Wave Method Factors Effect on Grain Refining of Nanocrystalline Copper Fabricated by Explosive Loading and its Dynamic Mechanical Property Synthesis and Polymerization Kinetics of Copolymer Styrene-Vinyltrimethoxysilane by Emulsifier-Free Emulsion Polymerization Processing Parameter Optimization of Flax Fiber Reinforced Polypropylene Composite Study on Electrodeposition of Ni-Graphite Composite Coatings in Sulfamate Bath Synthesis and Characterization of Poly(Styrene/n-Butyl Acrylate/Vinyltrimethoxysilane) by Emulsifier-Free Emulsion Polymerization Effect of Ni2+ on Chromium Electrodeposition in Cr(III) Plating Bath The Super-Capacitor Properties of Aligned Carbon Nanotubes Array Prepared by Radio Frequency Plasma-Enhanced Hot Filament Chemical Vapor Deposition Immobilization of MSWI Fly Ash with Geopolymers Energy Properties of Building Structures Subjected to Strong Earthquake Interface Study of Short Mullite Fiber Reinforced Al-Cu-Si Alloy Composites Damage Detection of Steel Domes Subjected to Earthquakes by Using Wavelet Transform Combustion Synthesis of TiC-Fe Coating on Surface of a Plane Iron Properties of Lightweight Concrete Masonry Units Made from Lightweight Aggregates Influence of the Magnetic Interaction among Particles on Distributions of Magnetic Fluids Using Computer Simulations Preparing and Characterization of the Geopolymer Based on Desulfurization Ash and Fly Ash Reaction Behavior between Li and NiO Thin Film by EIS Photocatalytic Activities of Visible-Light-Driven TiO2 Films Codoped with Aluminum and Nitrogen Design Method for Braiding Process and Structure Parameters of Three Dimensional Two-Step Tubular Braided Preform Deposition of ZnO:Al Thin Films by Ultrasonic Spray Pyrolysis Study on Material Selection and Manufacturing Process of Wind Turbine Blades Tunable Multimode Filtering of Solid Acoustic Waves in a Three-Component Phononic Crystal Slab In Situ Fabrication and Properties of Mg2Si/AZ91D Magnesium Matrix Composites Applications of Biorthogonal Non-Tensor Trivariate Wavelet Traits in Construction Engineering Management Research on Structure Stress Analysis on Composite by Lock-In Thermography Study on Modification of the Magnesium Phosphate Cement-Based Material by Fly Ash Electrochemical Copolymerization of Triphenylene and 3, 4-Ethylenedioxythiophene and Characterization of the Copolymer Surface Intergrity of Inconel 718 under MQL Condition Effect of Binary Admixture of Fly Ash and Slag on the Carbonation of Concrete for Hydraulic Structure Open-Air Storage Time Impact on Performance of PSP Used as Concrete Admixture Modification of Grooved Paulownia Wood Sandwich Preparation and Mechanical Properties of Polyurethane Elastomer with Two Soft Segments of HTPB/PTMG Application of the Calculator Technique in the Ability about the MMCs of the Anti-Vibration Degradation of Orange IV Dye Solution Catalyzed by PVDF/ Fe3+/Cu2+ Membrane in the Presence of H2O2 In Situ Preparation of Magnetic P(AOS-St-BA)-Coated CoFe2O4 Composite Microspheres in Soapless Emulsion Degradation of Orange IV Dye Solution Catalyzed by PVDF/Fe3+-TiO2 Catalytic Membrane in the Presence of H2O2 Application of S2O82-/FexOy Solid Super Acid as a Heterogeneous Fenton-Like Catalyst for the Degradation of Orange IV in Water Abrasion-Resistance at High Temperature of HVOF-Sprayed WC-12Co Coating on H13 Solid Super Acid of S2O82-/FexOy-CuOx Catalytic H2O2 to Remove Organic Pollutants in Water P. aeruginosa Inactivation with Silver and Nickel Doped TiO2 Film Coat on Glass Fiber Riving The Thin Sheet Metal Rubber Pad Stamping for PEM Fuel Cell Hydration Mechanism and Performances of Tri-Cementitous Materials System Compounded with Clinker Limestone Powder and Fly Ash Effect of Annealing Conditions on Microstructure Evolution of NiMnFeGa Shape Memory Thin Film Experimental Investigations of Shear Lag Effect in Orthotropic Composite Box Beam Mechanical Property of Phosphoaluminate Cement Synthesis and Properties of Fluorinated Polyimide Films Based on 1,2,3,4-Cyclobutanetetracarboxylic Dianhydride Preparation of Cation Exchange Fiber by Preradiation-Induced Grafting of Acrylic Acid without Removal of the Inhibitor Microstructure and Mechanical Properties of Sn-Bi Alloy Treated in the Semi-Solid State by Mechanical Stirring Process Research on Sodium Citrate for Pulse Electrodeposition ZnSe Thin Films Influence of Tunnel Excavation on Adjacent Underground Pipeline Influence of Rare Earth Oxides on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic Materials Effect of Nano-Oxides on Sintering and Crystallization of Fused Quartz Ceramic Materials Research on the Dissolving Character of Active Si/Al in Fly Ash Activated by Alkali Effect of Annealing Temperature on Properties of ZnO Thin Films Effect of Bamboo Fiber Modification on Tribological Performance of Brake Composites Study on Friction Properties of Cu-Fe-Based Powder Metallurgy Materials under Dry and Wet Friction Conditions Study on the Mechanical Properties and Handle of PTT/Wool Blended Fabrics Analysis of the Mineral Components and Strengths of the Cementuous Materials Produced with Iron Tailings Finite Element Simulation of Tensile Behaviors in the Elastic Region for PP/Nano-TiO2 Composites

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB05212652
• ISBN:
  • 9780878492022
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zurich
• ページ数/冊数: 2 v.
• 大きさ: 25 cm
• 分類:
  • DC22 : 620.118
• 件名:
  • LCSH : Composite materials -- Congresses
  • FREE : Composites technologies
  • FREE : ICAMMP
• 親書誌ID:
  • BA24926058