Materials processing technologies : selected, peer reviewed papers from the 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), 6-8 November, 2010, Shenzhen, China

著者

• International Conference on Advances in Materials and Manufacturing Processes
• Jiang, Zhengyi
• Liu, Xianghua
• Bu, Jinglong

書誌事項

Materials processing technologies : selected, peer reviewed papers from the 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), 6-8 November, 2010, Shenzhen, China

edited by Zhengyi Jiang, Xianghua Liu and Jinglong Bu

（Advanced materials research, v. 154-155）

Trans Tech Publications, c2011

• :[set]
• Prat 1
• Part 2

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

This collection of 356 peer-reviewed papers is devoted to the topics. of casting, forming and machining, processing and joining technologies, evolution of material properties in manufacturing processes, engineering or degradation of surfaces in manufacturing processes, design and behavior of equipment and tools; all seen from the perspective of the latest advances made and their practical application.

目次

Sponsors, Committees and Preface Study of Hot Compression Behavior of ZK60 Magnesium Alloy at Elevated Temperature Study on Formation Mechanism of WC in Carburized Layer of Fe-1.57W Binary Alloy Quantitative Analysis for Micro Geometrical Characteristic of Rough Surface Profile Based on Fractal Theory Linear Friction Welding Performance of Hydrogenated Ti-6Al-4V Alloy Removal of 2,4,6-Trichlorophenol by Iron and Manganese Oxides / Granular Activated Carbon with H2O2 Realization of Surface Topography Separation by B Spline Wavelet The Cutting Forces in Milling of Ti6Al4V Based on Single Factor Method Temperature Gradient and Heat Conduction of Titanium Alloy during Laser Welding Effect of Pulsed Magnetic Field on Structure Refinement of Pure Magnesium Surface Inorganic Modification of Wollastonite and its Application in Filling Polypropelyne The Effect of QPQ Salt-Bath Nitriding on Microstructure and Wear Resistance of 4Cr5MoSiV1 Steel Model Analysis of Friction Coefficient Varied with Sulfide Layer Thickness on Hard Steel Surface Numerical Simulation Techniques for Hollow Vacuum Forming of Double-Layered Plastic Sheets Intelligent Prediction of Process Parameters for Cold Bending Research on Microstructure and Wear Resistance of Double Glow Plasma Discharge Surface Titanizing on CrZrCu Alloy Research of 3D Design on Punching Dies of Automobile Panel Effect of RE on Microstructure and Interfacial Reactions of SnAgCu Solder Numerical Simulation on Performance Characteristic of Novel Fomichev Plug Used in Cone-Roll Piercer Orthogonal Experiment Research on Tool Wear Characteristics in Diamond Cutting of Glass Soda-Lime Mathematical Model of Spiral Bevel Gears Manufactured by Generating Line Method Study on the Arc Shape in the Wire Arc Spray Process Basic Principle and Mathematical Model of Cutting Hypoid Gears by Generating Line Method Research on Micromachined Gyroscope with Electrostatic Drive and Meso-Piezoresistive Detection First-Principles Study on Co-Doped ZnO with Oxygen Vacancy Parameters' Correlation Analysis Based on Gaussian Process for Injection Molding Study of Electro-Hydraulic Force Control System Controlled by Flow Press Servo-Valve and Nonlinear Performance Analysis Closed Hot Precision Forging Process of a Bevel Gear with Large Cone Angle Effect of Scanning Path on Microstructure and Microhardness of Laser Cladding Ti-6Al-4V Alloy Ovality Defect Control for Round Casting Based on Mechanical Deformation Analysis FEM Analysis on the Performances of HSK-E50 Toolholder-Spindle Interface Study on Morphologies of PAM Films Stress Analysis of Sheet Metal Vibration Incremental Forming An Advanced Dynamic Secondary Cooling Control Model for Bloom Castings Analysis of Static and Dynamic Characteristics of Milling Motorized Spindle Based on ANSYS Study of Low-Temperature WC-Co Coating by L-Solid Phase Reaction Sintering Process and Properties on the Precision Forming of Spline Cold Rolling Numerical Simulation of Softness Abrasive Two-Phase Flow Field on Level Set Method Study of NC Cold Tube Bending Spring-Back Characteristics Fundamental Technology and Properties Research of Brazing CBN Grinding Wheels Fuzzy Neural Network Controller Based on Improved Genetic Algorithm for Temperature of Glass Tempering and Annealing Process Tribological Performance Research of Micro-Nano Serpentine Powders Addictive to Lubricant Oil Corrosion Behavior of Different Thermal Spray Coatings and Hard Chromium Electroplating on A286 Super Alloy Research on the Preparation of Polyferric Silicate Chloride (PFSC) and Application on Algae Wastewater Treatment Surface Temperature Monitoring of Casting Strand Based on CCD Image Theoretical Analysis of Serrated Chip Formation Based on Ideal Models in High Speed Cutting Research on Multi-Domain Unified Modeling and Optimization of a Micro Mirror Improved Online Prediction of Silicon Content in Ironmaking Process Using Support Vector Regression with Novel Outlier Detection Investigation on Microstructure and Property of Non-Electric Welding Joint Research of Self-Learning of Plate Deformation Resistance Based on Genetic Algorithm Study of Influence of Stray Current on Potential Distribution of Pipeline by Numerical Simulation A Segregative MC Carbide in Centrifugal Casting High Speed Steel Roll Research on the High-Efficiency and Energy-Saving Cutting of the Aero Engine Fan Blades Analyses of Guiding Force for the Ring Rolling Mill Research and Design of Small-Engine LPG Motorcycle Mixer Particle Focusing through Lab-on-Chip Device by Negative Dielectrophoresis Chromate-Free Passive Films Made by Manganate and Waterborne Polyurethane on Galvanized Steel Sheets Modal Analysis about Direct-Drive Bi-Rotary Milling Head Numerical Simulation of Residual Stress and Deformation of Special Resistance Welding of Nuclear Power Zirconium Tube Development of Machining Method for Micromold Hydraulic Experiments of Mold Filling Process in Horizontal Centrifugal Casting An Investigation into the Microstructure of Adiabatic Shear Banding in AISI 1045 Hardened Steel due to High Speed Machining Effect of Initial Gap on Tensile Strength of Resistance Spot Welded Joints Measurement of Residual Stress by Cutting Method in Cold Ring Rolling A New Non-Sinusoidal Oscillation Waveform for Continuous Casting Mold Research on the Process Simulation of NC-ECM with Ball-End Tool-Electrode Analysis of Actuator Performance Based on Actuator Efficiency in Flatness Control of Cold Rolling Mill Defect Analysis of Cup-Shaped Aluminum Alloy Forgings with Flange Strain Analysis on Weld Zone of Tailor Welded Blanks in the Case of Welded Seam Cracking Study on the Flow Behavior in a Tubular Cavity during Water-Assisted Injection Molding Joule Energy Deposition in Segmented Metal Wire Electrical Explosion Synthesis and Characterization of a Self-Lubricating Film on Bearing Balls Low-Temperature Property of New Type Lead-Free Solder Sn-X-Cu-Ni Simulation of the Dendritic Growth of Aluminum Casting during Solidification Based on CA Method Synthesis of Nanoscale Pd/Fe Bimetallic Particles on PVDF Membrane Matrix for Dechlorination of Monochloroacetic Acid Modal Analysis and Testing of Large-Span Space Steel Structure A Machining Error Compensation Method Using on-Machine Profile Measurement in 3-Axis Aspheric Grinding Self-Adaptive Compensation Method on the Tool Position of Roller Gear Cam Surface Phase-Field Modeling of Solute Trapping in Single-Phase Alloys during Directional Solidification Study of Nickel-Based Composite Coatings on H13 Steel Surface by Laser A Machine Vision Approach to Tool Wear Monitoring Based on the Image of Workpiece Surface Texture Numerical Simulation on Quenching Temperature Field of 40Cr Steel Influence of Weld Heat Input on Weld Joint between B610CF and 16MnR Steel Repairing Surface Fatigue Damage of the Metal Material by Heat Treatment Discussion on the Polarity Effect of EDM Silicate-Based Passivation Technique on Alkaline Electrodeposited Zinc Coatings Influence of Three Organic Phosphonates on Calcite Crystal Growth A Simplified Transient Thermal Analysis of Resistance Spot Welding Process Oxidation Behavior of Glass/Yttrium Silicates/SiC Multi-Layer Coating Coated Carbon/Carbon Composites in Air and Combustion Gas Environment at High Temperature Time-Domain Characteristics Analysis of Penetration Arc Sound Signal in MIG Welding Temperature Field Numerical Simulation of Laser Welding Joint of Stainless Steel Automobile Vent Pipe Modeling of the High Frequency Plasma Reactive Synthesis of Titanium Dioxide Nanoparticles Study on Synthesis and Properties of the Hafnium Tungstate by CO2 Laser Effects of Applied Voltages on Micro-Arc Oxidized Coatings of Magnesium Alloy AZ91D in Aluminate Solution The Investigation of Composition and Corrosion Resistance of PIII Nitrided M50 Steel Analysis on Microstructure and Properties of Plasma Welding Joint with Surfaced Cobalt - Based Alloy Layer Fabrication of Fe-Based Amorphous Composite Coatings by Electrothermal Explosion Spraying on Aluminum Substrate Periodic Nanostructure on 65Mn Produced by Femtosecond Laser Irradiation Experimental Study on Planar Unidirectional Permeability of Glass Fiber Preforms at Constant Flow Rate Mechanical Properties and Fracture Behavior of Friction Stir Spot Welded AZ61 Magnesium Alloys Preparation of Epoxy/Montmorillonite Nanocomposite Coating and its Application in the High-Temperature Oil-Gas Environment with H2S Dyeing Properties to Soybean/Flax Blended Yarn with Reactive Dyes The Investigation of Effects of Galvanizing Parameters on Microstructure of Al-Zn-Si Coating Stiffness Matrices of Woven Fabric Composites with Resin Cure Contact Mechanics Analysis of Two Rough Surfaces in Contact Initial Electrodeposition Behavior of Amorphous Ni-P Alloys Properties of Two Lead-Free Solder Alloys and Comparison with Sn37Pb Design and Simulation of Fuzzy Control System in DSCC Processing of Cu Single Crystal Research on Correlation between Weld Concavity and Weld Process Parameters in Tailored Blank Laser Welding Investigation of the Tribological Properties of Si3N4 Ceramic Pair Lubricated by Emulsion of Alkane Study on H2S Corrosion Resistance of Arc-Sprayed Pseuado Zn-Al Alloy Coatings The Blocking Mechanisms and Chemical Modification for Alkane Grinding Fluid Applied for Si3N4 Ceramic Grinding Experimental Research on CBN Grinding Wheel Mechanical Dressing with Ultrasonic Vibration Assistance Design and Simulation of Micro-Displacement Magnification Mechanism Based on Flexible Hinges Tribological Properties of the Surface Bonded Self-Lubricating Coating Optimization of Parameters of Diamond-Coated Dies for Cu Wire Drawing by FEM Simulations The Forging Penetration Efficiency of C45 Steel Stepped Shaft Radial Forging with GFM Forging Machine Research Current Situation and Trends of Black Passivation Process for Galvanized Coating Joining of Cu/Fe by Pulse Current Heating Effect of H-BN Content on Microstructures of the Laser Cladding Self- Lubricant Coatings Preparing Aluminum Foam Sandwich Panels by the Pack-Rolling-Powder Metallurgy Foaming Technique Microstructure and Wear Properties of Self-Lubricating H-BN/Ni Coating by Laser Cladding Microstructure Characterization of Laser Clad TiVCrAlSi High Entropy Alloy Coating on Ti-6Al-4V Substrate Surface Roughness Prediction in the End Milling Parameters of Aluminum Nitride Ceramic by Response Surface Methodology A New Method for Surface Process of Polyester Film-Biomodification Investigation of Semisolid Welding Characteristics of 2A14 Aluminum Alloy Modeling, Analysis, and Simulation of Soldering Process for FPC Connector The Analysis of Four-Axis Belt Grinding for Marine Propeller Blade Hardness and Wear Resistance of Ni/Al2O3 Composite Coatings by Electrodeposition Direct Pattern Transfer of the Surface Structures of Shark Skin onto Thermoplastic Polymers Study on the Growth Mechanism of Electrolytic Chromium Coated Steel (ECCS) Investigation on the TRIP Steel Sheet Forming Processes with Respect to Punch Speed Loading-Paths Nanoindentation Test for the Stiffness Distribution Analysis of Bonded Au Ball Bonds Research on Bursting Behavior in Hydroforming of Double-Cone Tube Effect of Laser Welding Quality of Nuclear Reactor Coolant Pump Can on Eddy Current Losses A Constitutive Model for Thixotropic Plastic Forming of Composites Modeling and Analysis of Cutting Forces in Hard Turning T250 Steel Using CBN Tools Energy Saving Drive for Forming Equipments Selection of Tool Materials and Cutting Parameters Optimization for Turning Nickel-Based Powder Metallurgy Superalloy Logistic Simulator for Steel-Making Process The Nano-Effect of Nanometer Lubricating Material in Equipment Maintenance Optimizing the Machining Parameters in Glass Grinding Operation on the CNC Milling Machine for Best Surface Roughness Structure and Abrasion Resistance of MoS2/TiN Composite Coating on Ti-6Al-4V Alloy Study on the Hydrodynamic Lubrication Behavior in Cold Rolling Process Preparation and Adhesion Study of Indium Tin Oxide Films on Quartz Optical Fibers Columnar Crystal Growth of Ti46Al0.5W0.5Si Alloys Directional Solidified by Rectangular Cold Crucible Research on Machining Deformation of Miniature Thin-Plate Parts in Milling Experimental Study of the Silicon Start-up Heating and Melting Process in an Inductive Cold Crucible The Design of Ultrasound-Aided Electro-Spark Deposition Device and Experimental Investigation A Study on the Monitoring Technology of Extra-Large Deep Hole Drilling Using the Acceleration Sensor Effect of Loading Location of Viscous Medium on Sheet Deformation in Viscous Pressure Bulge (VPB) Test Parameter Identification for HAPC System in Hot Tandem Mill Mechanical Properties and Porosity Content of A201 Aluminum Alloy Castings in Different Cooling Rate Sand Molds Machining Characteristics of EDM for Non-Conductive Ceramics Using Adherent Copper Foils Experimental Study of Bipolar Pulse Electroforming on Micro Optical Aspheric Mold Manufacturing The Magnetism and Substrate Effects of Co3 Clusters on Cu(111), Pd(111), Ne(111) and Two Polar ZnO Surfaces Study on the Joint of Isothermal Superplastic Solid State Welding between Cr12MoV Steel and 40Cr Steel after Laser Surface Quenching Analysis about Effect of Rolling Parameters on Broadwise Deformation Numerical Study on Characteristics of EFP with Two Kinds of Liner Materials Effects of Oxygen Adsorption on Work Functions of Mo(110) Surface and Substrate Effect of Bottom Structure of Submerged Entry Nozzle on Flow Field in Ultra-Thick Slab Continuous Casting Mold Spot Weldability Comparison of High Strength Steel BIF340 and Normal Cold-Rolled Steel St14 Study on Gypsum Molding Material Properties and Alloy Liquidity Investigation of Surface Roughness Prediction in Single-Point Diamond Turning Possibility of Pulsed Electrochemical Processes to Nanofabrication Using Scanning Probe Oxidation Numerical Study on Forming Process by Continuous Resistance Heating The Effect of Filler Metals on Mechanical Properties of 6 Mm AA 6061-T6 Welded Joints Improving Performance of BaCo0.7Fe0.2Nb0.1O3- Ceramic Membrane by a Surface-Coating Layer for Partial Oxidation of Coke Oven Gas Study of Rolling Force Calculation Models for Cold Rolling Process The Experimental Research of the Non-Abrasive Cryogenic Polishing on GaAs Chip Surfaces The Motion Analysis and Its Modeling of Machining the Ruled Curved Surface by Five-Axis Linkage WEDM Growth Mechanism and Corrosion Behavior of Ceramic Coatings on CP-Ti Produced by Plasma Electrolytic Oxidation Optimization of Drawbeads for Springback Based on RSM and NSGA-II An Experimental Study on Micro Thixoforming Processing Parameters for Reaction Plate with Micro-Pin-Fin Arrays Research on Geometric Model for Axial Symmetry Aspheric Optical Parts Machining by Normal Equidistance Method High Quality Fiber Laser Cutting of Electronic Alumina Ceramics Characterization and Joining Behavior of Glass-to-KOVAR Alloy Fiber Laser Joint Laser Fabricated In Situ (Ti,W)C Multi-Ceramics Reinforced Intermetallic Matrix Composite Stents Cavity Processing Technique Etching Effects of Nanotechnology Fabrication on CMOS Transistor Gate Wafer Manufacturing Process Integration Effects of MgO Addition Level on Microstructure and Wear Resistance of Ni-WC Vacuum Fusion Sintering Coating Study on Ultra-Turning Technology of Optical Chalcohalide Glass Using Diamond Tool Finite Element Analysis of Molten Pool Depth and Dilution Rate in Laser Clad TiC/NiCrBSiC Coatings on Ti6Al4V Development of the Online Control Model for Aluminum Ingot Tapered Cooling Experimental Study on the Nickel-Based Metal Parts Manutactured by Laser Cladding Computer Simulation of Melt Flow in Different Gate System for Metal Injection Molding Connecting Shaft The Calculation of Deformation Force in Closed Muti-Ram Forging CNC Cutting Performance in Processing Using Cool-Air Cutting Technology Size Prediction Control Modeling in Cylindrical Grinding Optimization of Parameters in Long Fiber Reinforced Reaction Injection Molding on Bending Properties Experimental Investigation on Nanoprocessing of Stainless Steel Surface Cerium and Silane Conversion Coatings on AZ91 Magnesium Alloy Dry Sliding Wear Behaviours of Intrinsically Sintered Micro-Arc Oxidation Coatings on Pure Aluminum Research on the Interface of Infiltration Brazed Tungsten Carbide Composite Cladding Copper Plating on SUS 304 Plate from Acid Bath Study of VOC-Free, No-Clean Flux for Lead-Free Soldering in Electronic Packaging Tribological and Lubrication Properties of Sandblast-Textured Surfaces with Varied Roughness Tests on High-Velocity Forming of AZ31 Magnesium Alloy by Explosive-Impulsive Pressure(Part II) Investigation on Axial Turning-Grinding of Engineering Ceramics Optimization and Springback Control of Ultra-High Strength Steel Door Beam Forming Process Effect of Collocation Ratio of Coarse and Fine WC on Dual Grain Structure Cemented Carbide Study of Immersion Tin Plating on Copper by Galvanic Couple Current Method Planning and Optimizing of Assembly Production Line Based on Simulation Research and Realization of the Tool Radius Compensation Algorithm for Material Machining in the CNC System Numerical Analysis of the Multi-Point Stretch Forming Process of Aircraft Outer Skin Part Multiscale Simulation of Uniaxial Tension Deformation for Single Crystal Cu under Various Crystallographic Orientations Tests on High-Velocity Forming of AZ31 Magnesium Alloy by Explosive-Impulsive Pressure(Part I) Study on the Brush Plating Technology of 2A11 Duralumin Alloy Joining Control of PLC for Paving Stock Mechanism of New-Type Machine Tool about Rapid Prototyping Manufacturing for Ceramic Parts Optimization of the Hot Pressing Parameters of Nanocomposite Ceramic Tool and Die Materials: II. with Hybrid GA-BP Method Interface Behavior of Joint between CoCr Coating and Steel 35CrMo Substrate Produced by Electro-Spark Deposition Mechanics Behavior Analysis on Laser Cladding under Repeated Impacting Load Preparation of WC-Low Chromium Cast Iron Composite Material by Cast-Infiltration Study on the Spraying Technique of Ultra-High Strength Parts Made by 30CrMnSiNi2A Steel Optimization of the Hot Pressing Parameters of Nanocomposite Ceramic Tool and Die Materials: I. with BP Neural Network Method Optimization of Laser Transmission Joint between PET and Titanium Using Response Surface Methodology A Novel In Situ Roughness Measurement Based on Spatial Average Analysis of Binary Speckle Image An Investigation to the Behavior of Fatigue Crack and Rail Selection for High-Speed Development and Application of Control Model for Semi-Steel Steelmaking Effect of Cryogenic Treatment and Carbide Spray Coating on the Wear Behavior of Carburized Steel Optimization of Process Parameters of Thin Aluminum-Lithium Alloy Sheet Metal Laser Forming Based on Water-Cooling Cutting Force and Tool Deflection Predictions for High Speed Machining of Hard to Cut Material Influence of Vacuum Heat Treatment and Salt-Bath Nitrocarburization on the Corrosion Behavior of JIS SKD61 and DH31S Hot Work Steels Influence of Electron Beam Pulsed Times on the Properties of 40Cr Suspension Characteristics and Rheological Properties of Hydroxyapatite Powder in TBA Solvent Laser Alloying of Multi-Carbides Reinforced Metal Matrix Coating on a Ductile Iron Cycloidal Rotary Indexing Compound Locus Numerical Control Machining Technology Based on SIMENS840D Research on Surface Modification Technique by EDM Effect of Diamond Film's Thickness on Thermal Residual Stress after Considering the Substrate's Plasticity Growing Model of Interfacial Layer between Alloy Layer and Matrix in Diffusion Process of Hot Dip Aluminized Steel Research on Laser Polishing of Optical Glass Researches on the Relation Ship between Raman Scattering Enhancement Factors and Concentration of Solution Analysis and Evaluation for Usability of the Lime Titania Type Structural Steel Covered Electrode Multi-Objective Optimization for High Strength Steel Sheet Metal Forming Process Based on Response Surface Methodology Experimental Study on the Effect of Welding Residual Stress Relief by VSR Method Research about Techniques of Chinese Traditional Architectural Stone Carving Experiment Research on Abrasive Belt Vibration Grinding Terminal Surface of Work Piece Investigation into AZ31 Sheet Metal Deep Drawing Process at Elevated Temperature Mathematical Model of Bubble Dissolution Process in Polymer Melt Finite Element Analysis for Comprehensive Residual Stress of 7075 Aluminum Alloy Thick Plate Technical Research of Friction Stir Welding Repair in Aeroplane Aluminium Alloy Damage Numerical Analysis on Tribological Properties of Mechanical Seals with a Laser-Textured Face Microstructures and Properties of Co-Based Alloy Surfacing Layer with Longitudinal Magnetic Field Preparation of SiO2 Film by Sol-Gel On the Microstructure of XW-42 Steel after Direct Partial Remelting Investigation on Cooling Slope and Conventional Stir Cast A356/Al2O3 Metal Matrix Composites Influence of Radial Load on PEEK Plastic Bearings Life Cycle Study on Modeling and Simulating of Spiral Bevel Gears Effect of Aluminum Addition to Cu-10wt%Sn Bearing on its Pin-on-Disc Wear Behavior Study on Chromium-Free Color Passivation for Zinc Coating Treated with Silicate Thermal Errors Simulation and Modeling of Motorized Spindle Characterization of TiO2-Cordierite Carrier Prepared by APCVD and Sol-Gel Method Finite Element Simulation and Experimental Verification of Hydropiercing-Bend Process Effects of Nano-ZrO2 on the Microstructure and Mechanical Properties of Ti(C,N)-Based Cermet Die Materials Experimental Study on the Reheating Process for A356 Alloy in Thixoforming A Novel Electroless Ni-P Deposition on AZ91D Magnesium Alloy Plastic Deformation of Nanometric Grinding Process for FCC Metal Effect of Reinforcements on the Ultraprecision Performance of SiC Reinforced Aluminium Matrix Composites Analysis of a Tool System with a Four Axes Flexible Fixture Influences of Sintering Process on the Microstructure and Mechanical Behavior of ZrO2 Nano-Composite Ceramic Tool and Die Material Effects of Ultrasound Power on Microstructure and Mechanical Properties of AZ91 Alloy Study on the Friction and Wear Properties of Yttrium-Stabilized Zirconia Based Nanocomposite Ceramic Tool and Die Materials Microstructure and Properties of Ni-Base Coatings Obtained by Micro-Plasma Arc Cladding Processes The Research on Wear Performance at Elevated Temperature of Ni-Based Infiltrated Layer Modal and Strength Analysis on a Gearbox Housing Microstructure and Wearability of Surface Coating of Fe-Based Amorphous Core Welding Rod Effect of Mg on the Microstructure and Electrochemical Corrosion Behavior of Arced Sprayed Zn-Al Coating Plasma Electrolytic Carbonitriding of 20CrMnTi Steel Research on Molding for Al2O3Ceramic Substrate and its Processing Technic Numerical Study and Experimental Investigation of Solidification Phenomena in Semi-Continuous Casting of Bronze Optimization of Laser Deposited Ni-Based Single Crystal Superalloys Microstructure Numerical Study of the Thermosolutal Convection Induced Macrosegregation during Columnar Solidification Sideways Movement of Strip in In-Plane Roll-Bending Process with Conical Rollers Research and Application Status of Arc Welding Heat Source Model for T-Joint Numerical Simulation The Steel Joint Life of the Single-Wheeled Cycle Using FEM Analysis A Heat Transfer and Solidification Model of Continuous Cast Effect of Chromium Nitride on Microstructure and Properties of Fe-Based Coating by Laser Cladding Review of Materials and Process Modeling Techniques for Creep Age Forming Comparable Study on Water Cavitation Peening and Traditional Shot Peening of Almen Strips Influences of Variable Friction Coefficient on the Hot Formability of Ultra High Strength Steel Sheet Finite Element Thermal-Mechanical Coupled Analysis of Strand Bulging Deformation in Continuous Casting Effects of Heat Treatment on the Interfacial Structure of Nickel-Aluminum Coating Composites Numerical and Experimental Investigation of Pulsed Laser Welding of Hastelloy C-276 Alloy Sheets 3D Numerical Simulation of Electromagnetic Field during Low Frequency Electromagnetic Casting Process Effect of Graded Bias on Microstructure and Hardness of CrNX Films Simulation Analysis of Pneumatic on-off Pressure Mechanism on Printing Press Properties and Spot Welding Performance of Copper Composite Reinforced with Recycled Tungsten Carbide A Small Amount of Alloying Additions Applied in Hot Dip Galvanizing A Study on Design Methodology and Concurrent Engineering on Scroll Vacuum Pump Numerical Simulation of Magnetic Fluid Lubrication Error Decoupling and Linkage-Compensation on Five-Axis NC Machine Tools Restoration Technology of 30CrMnSiA Steel Parts on Airplane by Electroless Ni-Plating Surface Effect Preparatory Research of Vibrational Rotary Forging Single Step of Binder Thermal Debinding and Sintering of Injection Moulded 316L Stainless Steel The Casting Process Design and Simulation of the High-Manganese Steel Roller Analysis of Sheet Metal Vibration Incremental Forming Mechanism An Optimal Method of Task Balancing for Aircraft Subassembly under Resource Constraints Simulation of Gravity Effects on Bulk Crystal Growth with Effects on Undercooling High Speed Twin-Roll Casting of Al-Mg Alloys Waterproofing and Breathable Properties of Polyurethane Primers Research on the Process of Reaming Ultra-Long Cylinder The Effect of Microstructure on Unidirectional Chilled Solidification of High Chromium White Cast Iron Simulation of Thermal Stress and Hot Tearing in Engine Block Casting Comparison Study of the Fe-Based Composite Coating Prepared by Different Processes Distribution and Variation Characteristics of Temperature in Inertia Friction Welded Inconel 718 Joint Research on Stereotypes Parameters of Knitting Seamless Underwear Material Optimization and Analysis of Chemical Sensor Structure for Food Hazard Detection Research on Tempering Experiment for Laser Phase Transformation-Hardening Specimen Thermal Analysis and Optimization of MEMS Temperature Sensor for Food Detection Comparative Study and Mathematical Modeling of Machining Parameters in Ultrasonic-Assisted EDM of AISI H13 Tool Steel by the Application of Workpiece Vibration Influence of High-Frequency Micro-Forging on the Surface Microstructure and Cracking Behavior of Laser Cladding Influence of Welding Parameters on Residual Stress in 9% Ni Steel for Low Temperature Service Microstructure and Phase Selection of Undercooled Single-Phase Fe-Co Alloy Contact Simulation of Thrust Ball Bearing Based on ANSYS Study on the Mechanism of Prolonging Service Life of Tap in Low Frequency Torsional Vibration Tapping Investigation on the Structure and Properties of TiAlN Coatings Deposited by DC Reactive Magnetron Sputtering Optimization of Multi-Response Problems Using Taguchi's Quality Loss Function Based on Grey Relational Grade Study of Machining Microchannels on Quartz by the Laser-Induced Plasma Effect of Working Pressure on Microstructure and Mechanical Properties of Magnetron Sputtered ZrN Coatings Effect of Substrate Temperature on Structure and Mechanical Properties of ZrN Coatings Computational Analysis for Dynamic Characteristics of Drilling Shaft System in Deep Slot Hole Drilling Phase-Field Simulation of Process in Sintering Ceramics Research on the Effects of Ultrasonic Frequencies on the Grinding Surface Quality of Nano-Composite Ceramics Effects of Carbon Concentration Variation on Primary Austenite Stability of High Chromium Cast Iron FEM Analysis of Failure Process in Thin Film during Wear Test Through Silicon Vias (TSVs) Technology for MEMS Packaging Creep Fracture Analysis of W Strengthened 9% Cr Steel Weldment A New MEMS Assembly Unit for Hybrid Self Micropositioning and Forced Microclamping of Submilimeter Parts The Influence of Surface Texture on Rolling-Contact Fatigue of PEEK Bearings in Water Research on Focusing Spot Shape of High Power CO2 Laser Numerical Simulation of Induction Heating for Crankshaft Optimization of Thermal Friction Drilling Using Grey Relational Analysis Development of a New BCB ELID Lapping Process Study on Optimization and FEM Analysis of Centrifugal Pump Body Structure Finite Element Analysis on the Blade Structure of Centrifugal Pump Friction and Flow Behavior of Ceramics in Ring-Compression Test Study on Float Polishing of Metal Nanometer Surface Influence of Tool pin Profile on the Microstructure and Mechanical Behavior of Cu/SiC Metal Matrix Composites Produced by Friction Stir Processing The Casting Process Design and Simulation of the Large-Scale Volute of Dredge Pump Influences of Process Conditions on Ni-P Electroless Plating on PVC Plastic A Novel Process for Magnesium Alloy Sheets Deep Drawing at Gradient Temperature Inflluence of Tool Wear on Center Defects of the Workpiece during Cross Wedge Rolling Process Dynamic Wettability of Rice Straw Microstructure and Cavitation-Erosion Mechanism of Laser Cladding NiCrSiB Coating on CrNiMo Stainless Steel Microstructure and Mechanical Properties of Weld in High Strength Low Alloy Steel by Ultra-Narrow Gap Welding The Profile Curve of Die of Eccentric Shafts with Cross Wedge Rolling Preparation and Rejection Properties of Positively Charged Polysulfone Hollow Fiber Membrane by UV-Photografting Polymerization Control Factor Selection and Solder Residue Problem Study in Flip Chip Process Surface Polishing of Metal Mold Using Wax-Coated Abrasive SiC Particles Formation Mechanism of Alloyed Layer with W, Mo, Co Co-Diffusion in Pure Iron Study of Protective Coating for Feed Tube in Aluminum Melt Warm Stamping of Cell-Phone Cases with AZ31 Magnesium-Alloy Sheets Study on the High-Temperature Coating in Preventing Oxidation and Decarburization Effect of the Sulfurizing Layer on Tribological Properties of Netted Laser-Quenching Surface Process Control of Injection Molding Based on Multiscale Visualization Methodology - A Case Study Corrosion Evaluation for Aluminum Alloy (6262) in Aerated 3.5% NaCl Solutions under Hydrodynamic Conditions Microstructure and Toughness Properties of Subcritically, Intercritically and Supercritically Heat Affected Zones in X80 Pipeline Steel

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB05222463
• ISBN:
  • 9780878492046
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zurich
• ページ数/冊数: 2 v.
• 大きさ: 25 cm
• 分類:
  • DC22 : 620.11
• 件名:
  • LCSH : Production engineering -- Congresses
  • LCSH : Materials management -- Congresses
• 親書誌ID:
  • BA24926058