Materials processing technologies : selected, peer reviewed papers from the 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), 6-8 November, 2010, Shenzhen, China
著者
書誌事項
Materials processing technologies : selected, peer reviewed papers from the 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), 6-8 November, 2010, Shenzhen, China
（Advanced materials research, v. 154-155）
Trans Tech Publications, c2011
- :[set]
- Prat 1
- Part 2
大学図書館所蔵 全1件
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
This collection of 356 peer-reviewed papers is devoted to the topics. of casting, forming and machining, processing and joining technologies, evolution of material properties in manufacturing processes, engineering or degradation of surfaces in manufacturing processes, design and behavior of equipment and tools; all seen from the perspective of the latest advances made and their practical application.
目次
Sponsors, Committees and Preface
Study of Hot Compression Behavior of ZK60 Magnesium Alloy at Elevated Temperature
Study on Formation Mechanism of WC in Carburized Layer of Fe-1.57W Binary Alloy
Quantitative Analysis for Micro Geometrical Characteristic of Rough Surface Profile Based on Fractal Theory
Linear Friction Welding Performance of Hydrogenated Ti-6Al-4V Alloy
Removal of 2,4,6-Trichlorophenol by Iron and Manganese Oxides / Granular Activated Carbon with H2O2
Realization of Surface Topography Separation by B Spline Wavelet
The Cutting Forces in Milling of Ti6Al4V Based on Single Factor Method
Temperature Gradient and Heat Conduction of Titanium Alloy during Laser Welding
Effect of Pulsed Magnetic Field on Structure Refinement of Pure Magnesium
Surface Inorganic Modification of Wollastonite and its Application in Filling Polypropelyne
The Effect of QPQ Salt-Bath Nitriding on Microstructure and Wear Resistance of 4Cr5MoSiV1 Steel
Model Analysis of Friction Coefficient Varied with Sulfide Layer Thickness on Hard Steel Surface
Numerical Simulation Techniques for Hollow Vacuum Forming of Double-Layered Plastic Sheets
Intelligent Prediction of Process Parameters for Cold Bending
Research on Microstructure and Wear Resistance of Double Glow Plasma Discharge Surface Titanizing on CrZrCu Alloy
Research of 3D Design on Punching Dies of Automobile Panel
Effect of RE on Microstructure and Interfacial Reactions of SnAgCu Solder
Numerical Simulation on Performance Characteristic of Novel Fomichev Plug Used in Cone-Roll Piercer
Orthogonal Experiment Research on Tool Wear Characteristics in Diamond Cutting of Glass Soda-Lime
Mathematical Model of Spiral Bevel Gears Manufactured by Generating Line Method
Study on the Arc Shape in the Wire Arc Spray Process
Basic Principle and Mathematical Model of Cutting Hypoid Gears by Generating Line Method
Research on Micromachined Gyroscope with Electrostatic Drive and Meso-Piezoresistive Detection
First-Principles Study on Co-Doped ZnO with Oxygen Vacancy
Parameters' Correlation Analysis Based on Gaussian Process for Injection Molding
Study of Electro-Hydraulic Force Control System Controlled by Flow Press Servo-Valve and Nonlinear Performance Analysis
Closed Hot Precision Forging Process of a Bevel Gear with Large Cone Angle
Effect of Scanning Path on Microstructure and Microhardness of Laser Cladding Ti-6Al-4V Alloy
Ovality Defect Control for Round Casting Based on Mechanical Deformation Analysis
FEM Analysis on the Performances of HSK-E50 Toolholder-Spindle Interface
Study on Morphologies of PAM Films
Stress Analysis of Sheet Metal Vibration Incremental Forming
An Advanced Dynamic Secondary Cooling Control Model for Bloom Castings
Analysis of Static and Dynamic Characteristics of Milling Motorized Spindle Based on ANSYS
Study of Low-Temperature WC-Co Coating by L-Solid Phase Reaction Sintering
Process and Properties on the Precision Forming of Spline Cold Rolling
Numerical Simulation of Softness Abrasive Two-Phase Flow Field on Level Set Method
Study of NC Cold Tube Bending Spring-Back Characteristics
Fundamental Technology and Properties Research of Brazing CBN Grinding Wheels
Fuzzy Neural Network Controller Based on Improved Genetic Algorithm for Temperature of Glass Tempering and Annealing Process
Tribological Performance Research of Micro-Nano Serpentine Powders Addictive to Lubricant Oil
Corrosion Behavior of Different Thermal Spray Coatings and Hard Chromium Electroplating on A286 Super Alloy
Research on the Preparation of Polyferric Silicate Chloride (PFSC) and Application on Algae Wastewater Treatment
Surface Temperature Monitoring of Casting Strand Based on CCD Image
Theoretical Analysis of Serrated Chip Formation Based on Ideal Models in High Speed Cutting
Research on Multi-Domain Unified Modeling and Optimization of a Micro Mirror
Improved Online Prediction of Silicon Content in Ironmaking Process Using Support Vector Regression with Novel Outlier Detection
Investigation on Microstructure and Property of Non-Electric Welding Joint
Research of Self-Learning of Plate Deformation Resistance Based on Genetic Algorithm
Study of Influence of Stray Current on Potential Distribution of Pipeline by Numerical Simulation
A Segregative MC Carbide in Centrifugal Casting High Speed Steel Roll
Research on the High-Efficiency and Energy-Saving Cutting of the Aero Engine Fan Blades
Analyses of Guiding Force for the Ring Rolling Mill
Research and Design of Small-Engine LPG Motorcycle Mixer
Particle Focusing through Lab-on-Chip Device by Negative Dielectrophoresis
Chromate-Free Passive Films Made by Manganate and Waterborne Polyurethane on Galvanized Steel Sheets
Modal Analysis about Direct-Drive Bi-Rotary Milling Head
Numerical Simulation of Residual Stress and Deformation of Special Resistance Welding of Nuclear Power Zirconium Tube
Development of Machining Method for Micromold
Hydraulic Experiments of Mold Filling Process in Horizontal Centrifugal Casting
An Investigation into the Microstructure of Adiabatic Shear Banding in AISI 1045 Hardened Steel due to High Speed Machining
Effect of Initial Gap on Tensile Strength of Resistance Spot Welded Joints
Measurement of Residual Stress by Cutting Method in Cold Ring Rolling
A New Non-Sinusoidal Oscillation Waveform for Continuous Casting Mold
Research on the Process Simulation of NC-ECM with Ball-End Tool-Electrode
Analysis of Actuator Performance Based on Actuator Efficiency in Flatness Control of Cold Rolling Mill
Defect Analysis of Cup-Shaped Aluminum Alloy Forgings with Flange
Strain Analysis on Weld Zone of Tailor Welded Blanks in the Case of Welded Seam Cracking
Study on the Flow Behavior in a Tubular Cavity during Water-Assisted Injection Molding
Joule Energy Deposition in Segmented Metal Wire Electrical Explosion
Synthesis and Characterization of a Self-Lubricating Film on Bearing Balls
Low-Temperature Property of New Type Lead-Free Solder Sn-X-Cu-Ni
Simulation of the Dendritic Growth of Aluminum Casting during Solidification Based on CA Method
Synthesis of Nanoscale Pd/Fe Bimetallic Particles on PVDF Membrane Matrix for Dechlorination of Monochloroacetic Acid
Modal Analysis and Testing of Large-Span Space Steel Structure
A Machining Error Compensation Method Using on-Machine Profile Measurement in 3-Axis Aspheric Grinding
Self-Adaptive Compensation Method on the Tool Position of Roller Gear Cam Surface
Phase-Field Modeling of Solute Trapping in Single-Phase Alloys during Directional Solidification
Study of Nickel-Based Composite Coatings on H13 Steel Surface by Laser
A Machine Vision Approach to Tool Wear Monitoring Based on the Image of Workpiece Surface Texture
Numerical Simulation on Quenching Temperature Field of 40Cr Steel
Influence of Weld Heat Input on Weld Joint between B610CF and 16MnR Steel
Repairing Surface Fatigue Damage of the Metal Material by Heat Treatment
Discussion on the Polarity Effect of EDM
Silicate-Based Passivation Technique on Alkaline Electrodeposited Zinc Coatings
Influence of Three Organic Phosphonates on Calcite Crystal Growth
A Simplified Transient Thermal Analysis of Resistance Spot Welding Process
Oxidation Behavior of Glass/Yttrium Silicates/SiC Multi-Layer Coating Coated Carbon/Carbon Composites in Air and Combustion Gas Environment at High Temperature
Time-Domain Characteristics Analysis of Penetration Arc Sound Signal in MIG Welding
Temperature Field Numerical Simulation of Laser Welding Joint of Stainless Steel Automobile Vent Pipe
Modeling of the High Frequency Plasma Reactive Synthesis of Titanium Dioxide Nanoparticles
Study on Synthesis and Properties of the Hafnium Tungstate by CO2 Laser
Effects of Applied Voltages on Micro-Arc Oxidized Coatings of Magnesium Alloy AZ91D in Aluminate Solution
The Investigation of Composition and Corrosion Resistance of PIII Nitrided M50 Steel
Analysis on Microstructure and Properties of Plasma Welding Joint with Surfaced Cobalt - Based Alloy Layer
Fabrication of Fe-Based Amorphous Composite Coatings by Electrothermal Explosion Spraying on Aluminum Substrate
Periodic Nanostructure on 65Mn Produced by Femtosecond Laser Irradiation
Experimental Study on Planar Unidirectional Permeability of Glass Fiber Preforms at Constant Flow Rate
Mechanical Properties and Fracture Behavior of Friction Stir Spot Welded AZ61 Magnesium Alloys
Preparation of Epoxy/Montmorillonite Nanocomposite Coating and its Application in the High-Temperature Oil-Gas Environment with H2S
Dyeing Properties to Soybean/Flax Blended Yarn with Reactive Dyes
The Investigation of Effects of Galvanizing Parameters on Microstructure of Al-Zn-Si Coating
Stiffness Matrices of Woven Fabric Composites with Resin Cure
Contact Mechanics Analysis of Two Rough Surfaces in Contact
Initial Electrodeposition Behavior of Amorphous Ni-P Alloys
Properties of Two Lead-Free Solder Alloys and Comparison with Sn37Pb
Design and Simulation of Fuzzy Control System in DSCC Processing of Cu Single Crystal
Research on Correlation between Weld Concavity and Weld Process Parameters in Tailored Blank Laser Welding
Investigation of the Tribological Properties of Si3N4 Ceramic Pair Lubricated by Emulsion of Alkane
Study on H2S Corrosion Resistance of Arc-Sprayed Pseuado Zn-Al Alloy Coatings
The Blocking Mechanisms and Chemical Modification for Alkane Grinding Fluid Applied for Si3N4 Ceramic Grinding
Experimental Research on CBN Grinding Wheel Mechanical Dressing with Ultrasonic Vibration Assistance
Design and Simulation of Micro-Displacement Magnification Mechanism Based on Flexible Hinges
Tribological Properties of the Surface Bonded Self-Lubricating Coating
Optimization of Parameters of Diamond-Coated Dies for Cu Wire Drawing by FEM Simulations
The Forging Penetration Efficiency of C45 Steel Stepped Shaft Radial Forging with GFM Forging Machine
Research Current Situation and Trends of Black Passivation Process for Galvanized Coating
Joining of Cu/Fe by Pulse Current Heating
Effect of H-BN Content on Microstructures of the Laser Cladding Self- Lubricant Coatings
Preparing Aluminum Foam Sandwich Panels by the Pack-Rolling-Powder Metallurgy Foaming Technique
Microstructure and Wear Properties of Self-Lubricating H-BN/Ni Coating by Laser Cladding
Microstructure Characterization of Laser Clad TiVCrAlSi High Entropy Alloy Coating on Ti-6Al-4V Substrate
Surface Roughness Prediction in the End Milling Parameters of Aluminum Nitride Ceramic by Response Surface Methodology
A New Method for Surface Process of Polyester Film-Biomodification
Investigation of Semisolid Welding Characteristics of 2A14 Aluminum Alloy
Modeling, Analysis, and Simulation of Soldering Process for FPC Connector
The Analysis of Four-Axis Belt Grinding for Marine Propeller Blade
Hardness and Wear Resistance of Ni/Al2O3 Composite Coatings by Electrodeposition
Direct Pattern Transfer of the Surface Structures of Shark Skin onto Thermoplastic Polymers
Study on the Growth Mechanism of Electrolytic Chromium Coated Steel (ECCS)
Investigation on the TRIP Steel Sheet Forming Processes with Respect to Punch Speed Loading-Paths
Nanoindentation Test for the Stiffness Distribution Analysis of Bonded Au Ball Bonds
Research on Bursting Behavior in Hydroforming of Double-Cone Tube
Effect of Laser Welding Quality of Nuclear Reactor Coolant Pump Can on Eddy Current Losses
A Constitutive Model for Thixotropic Plastic Forming of Composites
Modeling and Analysis of Cutting Forces in Hard Turning T250 Steel Using CBN Tools
Energy Saving Drive for Forming Equipments
Selection of Tool Materials and Cutting Parameters Optimization for Turning Nickel-Based Powder Metallurgy Superalloy
Logistic Simulator for Steel-Making Process
The Nano-Effect of Nanometer Lubricating Material in Equipment Maintenance
Optimizing the Machining Parameters in Glass Grinding Operation on the CNC Milling Machine for Best Surface Roughness
Structure and Abrasion Resistance of MoS2/TiN Composite Coating on Ti-6Al-4V Alloy
Study on the Hydrodynamic Lubrication Behavior in Cold Rolling Process
Preparation and Adhesion Study of Indium Tin Oxide Films on Quartz Optical Fibers
Columnar Crystal Growth of Ti46Al0.5W0.5Si Alloys Directional Solidified by Rectangular Cold Crucible
Research on Machining Deformation of Miniature Thin-Plate Parts in Milling
Experimental Study of the Silicon Start-up Heating and Melting Process in an Inductive Cold Crucible
The Design of Ultrasound-Aided Electro-Spark Deposition Device and Experimental Investigation
A Study on the Monitoring Technology of Extra-Large Deep Hole Drilling Using the Acceleration Sensor
Effect of Loading Location of Viscous Medium on Sheet Deformation in Viscous Pressure Bulge (VPB) Test
Parameter Identification for HAPC System in Hot Tandem Mill
Mechanical Properties and Porosity Content of A201 Aluminum Alloy Castings in Different Cooling Rate Sand Molds
Machining Characteristics of EDM for Non-Conductive Ceramics Using Adherent Copper Foils
Experimental Study of Bipolar Pulse Electroforming on Micro Optical Aspheric Mold Manufacturing
The Magnetism and Substrate Effects of Co3 Clusters on Cu(111), Pd(111), Ne(111) and Two Polar ZnO Surfaces
Study on the Joint of Isothermal Superplastic Solid State Welding between Cr12MoV Steel and 40Cr Steel after Laser Surface Quenching
Analysis about Effect of Rolling Parameters on Broadwise Deformation
Numerical Study on Characteristics of EFP with Two Kinds of Liner Materials
Effects of Oxygen Adsorption on Work Functions of Mo(110) Surface and Substrate
Effect of Bottom Structure of Submerged Entry Nozzle on Flow Field in Ultra-Thick Slab Continuous Casting Mold
Spot Weldability Comparison of High Strength Steel BIF340 and Normal Cold-Rolled Steel St14
Study on Gypsum Molding Material Properties and Alloy Liquidity
Investigation of Surface Roughness Prediction in Single-Point Diamond Turning
Possibility of Pulsed Electrochemical Processes to Nanofabrication Using Scanning Probe Oxidation
Numerical Study on Forming Process by Continuous Resistance Heating
The Effect of Filler Metals on Mechanical Properties of 6 Mm AA 6061-T6 Welded Joints
Improving Performance of BaCo0.7Fe0.2Nb0.1O3- Ceramic Membrane by a Surface-Coating Layer for Partial Oxidation of Coke Oven Gas
Study of Rolling Force Calculation Models for Cold Rolling Process
The Experimental Research of the Non-Abrasive Cryogenic Polishing on GaAs Chip Surfaces
The Motion Analysis and Its Modeling of Machining the Ruled Curved Surface by Five-Axis Linkage WEDM
Growth Mechanism and Corrosion Behavior of Ceramic Coatings on CP-Ti Produced by Plasma Electrolytic Oxidation
Optimization of Drawbeads for Springback Based on RSM and NSGA-II
An Experimental Study on Micro Thixoforming Processing Parameters for Reaction Plate with Micro-Pin-Fin Arrays
Research on Geometric Model for Axial Symmetry Aspheric Optical Parts Machining by Normal Equidistance Method
High Quality Fiber Laser Cutting of Electronic Alumina Ceramics
Characterization and Joining Behavior of Glass-to-KOVAR Alloy Fiber Laser Joint
Laser Fabricated In Situ (Ti,W)C Multi-Ceramics Reinforced Intermetallic Matrix Composite
Stents Cavity Processing Technique
Etching Effects of Nanotechnology Fabrication on CMOS Transistor Gate Wafer Manufacturing Process Integration
Effects of MgO Addition Level on Microstructure and Wear Resistance of Ni-WC Vacuum Fusion Sintering Coating
Study on Ultra-Turning Technology of Optical Chalcohalide Glass Using Diamond Tool
Finite Element Analysis of Molten Pool Depth and Dilution Rate in Laser Clad TiC/NiCrBSiC Coatings on Ti6Al4V
Development of the Online Control Model for Aluminum Ingot Tapered Cooling
Experimental Study on the Nickel-Based Metal Parts Manutactured by Laser Cladding
Computer Simulation of Melt Flow in Different Gate System for Metal Injection Molding Connecting Shaft
The Calculation of Deformation Force in Closed Muti-Ram Forging
CNC Cutting Performance in Processing Using Cool-Air Cutting Technology
Size Prediction Control Modeling in Cylindrical Grinding
Optimization of Parameters in Long Fiber Reinforced Reaction Injection Molding on Bending Properties
Experimental Investigation on Nanoprocessing of Stainless Steel Surface
Cerium and Silane Conversion Coatings on AZ91 Magnesium Alloy
Dry Sliding Wear Behaviours of Intrinsically Sintered Micro-Arc Oxidation Coatings on Pure Aluminum
Research on the Interface of Infiltration Brazed Tungsten Carbide Composite Cladding
Copper Plating on SUS 304 Plate from Acid Bath
Study of VOC-Free, No-Clean Flux for Lead-Free Soldering in Electronic Packaging
Tribological and Lubrication Properties of Sandblast-Textured Surfaces with Varied Roughness
Tests on High-Velocity Forming of AZ31 Magnesium Alloy by Explosive-Impulsive Pressure(Part II)
Investigation on Axial Turning-Grinding of Engineering Ceramics
Optimization and Springback Control of Ultra-High Strength Steel Door Beam Forming Process
Effect of Collocation Ratio of Coarse and Fine WC on Dual Grain Structure Cemented Carbide
Study of Immersion Tin Plating on Copper by Galvanic Couple Current Method
Planning and Optimizing of Assembly Production Line Based on Simulation
Research and Realization of the Tool Radius Compensation Algorithm for Material Machining in the CNC System
Numerical Analysis of the Multi-Point Stretch Forming Process of Aircraft Outer Skin Part
Multiscale Simulation of Uniaxial Tension Deformation for Single Crystal Cu under Various Crystallographic Orientations
Tests on High-Velocity Forming of AZ31 Magnesium Alloy by Explosive-Impulsive Pressure(Part I)
Study on the Brush Plating Technology of 2A11 Duralumin Alloy Joining
Control of PLC for Paving Stock Mechanism of New-Type Machine Tool about Rapid Prototyping Manufacturing for Ceramic Parts
Optimization of the Hot Pressing Parameters of Nanocomposite Ceramic Tool and Die Materials: II. with Hybrid GA-BP Method
Interface Behavior of Joint between CoCr Coating and Steel 35CrMo Substrate Produced by Electro-Spark Deposition
Mechanics Behavior Analysis on Laser Cladding under Repeated Impacting Load
Preparation of WC-Low Chromium Cast Iron Composite Material by Cast-Infiltration
Study on the Spraying Technique of Ultra-High Strength Parts Made by 30CrMnSiNi2A Steel
Optimization of the Hot Pressing Parameters of Nanocomposite Ceramic Tool and Die Materials: I. with BP Neural Network Method
Optimization of Laser Transmission Joint between PET and Titanium Using Response Surface Methodology
A Novel In Situ Roughness Measurement Based on Spatial Average Analysis of Binary Speckle Image
An Investigation to the Behavior of Fatigue Crack and Rail Selection for High-Speed
Development and Application of Control Model for Semi-Steel Steelmaking
Effect of Cryogenic Treatment and Carbide Spray Coating on the Wear Behavior of Carburized Steel
Optimization of Process Parameters of Thin Aluminum-Lithium Alloy Sheet Metal Laser Forming Based on Water-Cooling
Cutting Force and Tool Deflection Predictions for High Speed Machining of Hard to Cut Material
Influence of Vacuum Heat Treatment and Salt-Bath Nitrocarburization on the Corrosion Behavior of JIS SKD61 and DH31S Hot Work Steels
Influence of Electron Beam Pulsed Times on the Properties of 40Cr
Suspension Characteristics and Rheological Properties of Hydroxyapatite Powder in TBA Solvent
Laser Alloying of Multi-Carbides Reinforced Metal Matrix Coating on a Ductile Iron
Cycloidal Rotary Indexing Compound Locus Numerical Control Machining Technology Based on SIMENS840D
Research on Surface Modification Technique by EDM
Effect of Diamond Film's Thickness on Thermal Residual Stress after Considering the Substrate's Plasticity
Growing Model of Interfacial Layer between Alloy Layer and Matrix in Diffusion Process of Hot Dip Aluminized Steel
Research on Laser Polishing of Optical Glass
Researches on the Relation Ship between Raman Scattering Enhancement Factors and Concentration of Solution
Analysis and Evaluation for Usability of the Lime Titania Type Structural Steel Covered Electrode
Multi-Objective Optimization for High Strength Steel Sheet Metal Forming Process Based on Response Surface Methodology
Experimental Study on the Effect of Welding Residual Stress Relief by VSR Method
Research about Techniques of Chinese Traditional Architectural Stone Carving
Experiment Research on Abrasive Belt Vibration Grinding Terminal Surface of Work Piece
Investigation into AZ31 Sheet Metal Deep Drawing Process at Elevated Temperature
Mathematical Model of Bubble Dissolution Process in Polymer Melt
Finite Element Analysis for Comprehensive Residual Stress of 7075 Aluminum Alloy Thick Plate
Technical Research of Friction Stir Welding Repair in Aeroplane Aluminium Alloy Damage
Numerical Analysis on Tribological Properties of Mechanical Seals with a Laser-Textured Face
Microstructures and Properties of Co-Based Alloy Surfacing Layer with Longitudinal Magnetic Field
Preparation of SiO2 Film by Sol-Gel
On the Microstructure of XW-42 Steel after Direct Partial Remelting
Investigation on Cooling Slope and Conventional Stir Cast A356/Al2O3 Metal Matrix Composites
Influence of Radial Load on PEEK Plastic Bearings Life Cycle
Study on Modeling and Simulating of Spiral Bevel Gears
Effect of Aluminum Addition to Cu-10wt%Sn Bearing on its Pin-on-Disc Wear Behavior
Study on Chromium-Free Color Passivation for Zinc Coating Treated with Silicate
Thermal Errors Simulation and Modeling of Motorized Spindle
Characterization of TiO2-Cordierite Carrier Prepared by APCVD and Sol-Gel Method
Finite Element Simulation and Experimental Verification of Hydropiercing-Bend Process
Effects of Nano-ZrO2 on the Microstructure and Mechanical Properties of Ti(C,N)-Based Cermet Die Materials
Experimental Study on the Reheating Process for A356 Alloy in Thixoforming
A Novel Electroless Ni-P Deposition on AZ91D Magnesium Alloy
Plastic Deformation of Nanometric Grinding Process for FCC Metal
Effect of Reinforcements on the Ultraprecision Performance of SiC Reinforced Aluminium Matrix Composites
Analysis of a Tool System with a Four Axes Flexible Fixture
Influences of Sintering Process on the Microstructure and Mechanical Behavior of ZrO2 Nano-Composite Ceramic Tool and Die Material
Effects of Ultrasound Power on Microstructure and Mechanical Properties of AZ91 Alloy
Study on the Friction and Wear Properties of Yttrium-Stabilized Zirconia Based Nanocomposite Ceramic Tool and Die Materials
Microstructure and Properties of Ni-Base Coatings Obtained by Micro-Plasma Arc Cladding Processes
The Research on Wear Performance at Elevated Temperature of Ni-Based Infiltrated Layer
Modal and Strength Analysis on a Gearbox Housing
Microstructure and Wearability of Surface Coating of Fe-Based Amorphous Core Welding Rod
Effect of Mg on the Microstructure and Electrochemical Corrosion Behavior of Arced Sprayed Zn-Al Coating
Plasma Electrolytic Carbonitriding of 20CrMnTi Steel
Research on Molding for Al2O3Ceramic Substrate and its Processing Technic
Numerical Study and Experimental Investigation of Solidification Phenomena in Semi-Continuous Casting of Bronze
Optimization of Laser Deposited Ni-Based Single Crystal Superalloys Microstructure
Numerical Study of the Thermosolutal Convection Induced Macrosegregation during Columnar Solidification
Sideways Movement of Strip in In-Plane Roll-Bending Process with Conical Rollers
Research and Application Status of Arc Welding Heat Source Model for T-Joint Numerical Simulation
The Steel Joint Life of the Single-Wheeled Cycle Using FEM Analysis
A Heat Transfer and Solidification Model of Continuous Cast
Effect of Chromium Nitride on Microstructure and Properties of Fe-Based Coating by Laser Cladding
Review of Materials and Process Modeling Techniques for Creep Age Forming
Comparable Study on Water Cavitation Peening and Traditional Shot Peening of Almen Strips
Influences of Variable Friction Coefficient on the Hot Formability of Ultra High Strength Steel Sheet
Finite Element Thermal-Mechanical Coupled Analysis of Strand Bulging Deformation in Continuous Casting
Effects of Heat Treatment on the Interfacial Structure of Nickel-Aluminum Coating Composites
Numerical and Experimental Investigation of Pulsed Laser Welding of Hastelloy C-276 Alloy Sheets
3D Numerical Simulation of Electromagnetic Field during Low Frequency Electromagnetic Casting Process
Effect of Graded Bias on Microstructure and Hardness of CrNX Films
Simulation Analysis of Pneumatic on-off Pressure Mechanism on Printing Press
Properties and Spot Welding Performance of Copper Composite Reinforced with Recycled Tungsten Carbide
A Small Amount of Alloying Additions Applied in Hot Dip Galvanizing
A Study on Design Methodology and Concurrent Engineering on Scroll Vacuum Pump
Numerical Simulation of Magnetic Fluid Lubrication
Error Decoupling and Linkage-Compensation on Five-Axis NC Machine Tools
Restoration Technology of 30CrMnSiA Steel Parts on Airplane by Electroless Ni-Plating
Surface Effect Preparatory Research of Vibrational Rotary Forging
Single Step of Binder Thermal Debinding and Sintering of Injection Moulded 316L Stainless Steel
The Casting Process Design and Simulation of the High-Manganese Steel Roller
Analysis of Sheet Metal Vibration Incremental Forming Mechanism
An Optimal Method of Task Balancing for Aircraft Subassembly under Resource Constraints
Simulation of Gravity Effects on Bulk Crystal Growth with Effects on Undercooling
High Speed Twin-Roll Casting of Al-Mg Alloys
Waterproofing and Breathable Properties of Polyurethane Primers
Research on the Process of Reaming Ultra-Long Cylinder
The Effect of Microstructure on Unidirectional Chilled Solidification of High Chromium White Cast Iron
Simulation of Thermal Stress and Hot Tearing in Engine Block Casting
Comparison Study of the Fe-Based Composite Coating Prepared by Different Processes
Distribution and Variation Characteristics of Temperature in Inertia Friction Welded Inconel 718 Joint
Research on Stereotypes Parameters of Knitting Seamless Underwear Material
Optimization and Analysis of Chemical Sensor Structure for Food Hazard Detection
Research on Tempering Experiment for Laser Phase Transformation-Hardening Specimen
Thermal Analysis and Optimization of MEMS Temperature Sensor for Food Detection
Comparative Study and Mathematical Modeling of Machining Parameters in Ultrasonic-Assisted EDM of AISI H13 Tool Steel by the Application of Workpiece Vibration
Influence of High-Frequency Micro-Forging on the Surface Microstructure and Cracking Behavior of Laser Cladding
Influence of Welding Parameters on Residual Stress in 9% Ni Steel for Low Temperature Service
Microstructure and Phase Selection of Undercooled Single-Phase Fe-Co Alloy
Contact Simulation of Thrust Ball Bearing Based on ANSYS
Study on the Mechanism of Prolonging Service Life of Tap in Low Frequency Torsional Vibration Tapping
Investigation on the Structure and Properties of TiAlN Coatings Deposited by DC Reactive Magnetron Sputtering
Optimization of Multi-Response Problems Using Taguchi's Quality Loss Function Based on Grey Relational Grade
Study of Machining Microchannels on Quartz by the Laser-Induced Plasma
Effect of Working Pressure on Microstructure and Mechanical Properties of Magnetron Sputtered ZrN Coatings
Effect of Substrate Temperature on Structure and Mechanical Properties of ZrN Coatings
Computational Analysis for Dynamic Characteristics of Drilling Shaft System in Deep Slot Hole Drilling
Phase-Field Simulation of Process in Sintering Ceramics
Research on the Effects of Ultrasonic Frequencies on the Grinding Surface Quality of Nano-Composite Ceramics
Effects of Carbon Concentration Variation on Primary Austenite Stability of High Chromium Cast Iron
FEM Analysis of Failure Process in Thin Film during Wear Test
Through Silicon Vias (TSVs) Technology for MEMS Packaging
Creep Fracture Analysis of W Strengthened 9% Cr Steel Weldment
A New MEMS Assembly Unit for Hybrid Self Micropositioning and Forced Microclamping of Submilimeter Parts
The Influence of Surface Texture on Rolling-Contact Fatigue of PEEK Bearings in Water
Research on Focusing Spot Shape of High Power CO2 Laser
Numerical Simulation of Induction Heating for Crankshaft
Optimization of Thermal Friction Drilling Using Grey Relational Analysis
Development of a New BCB ELID Lapping Process
Study on Optimization and FEM Analysis of Centrifugal Pump Body Structure
Finite Element Analysis on the Blade Structure of Centrifugal Pump
Friction and Flow Behavior of Ceramics in Ring-Compression Test
Study on Float Polishing of Metal Nanometer Surface
Influence of Tool pin Profile on the Microstructure and Mechanical Behavior of Cu/SiC Metal Matrix Composites Produced by Friction Stir Processing
The Casting Process Design and Simulation of the Large-Scale Volute of Dredge Pump
Influences of Process Conditions on Ni-P Electroless Plating on PVC Plastic
A Novel Process for Magnesium Alloy Sheets Deep Drawing at Gradient Temperature
Inflluence of Tool Wear on Center Defects of the Workpiece during Cross Wedge Rolling Process
Dynamic Wettability of Rice Straw
Microstructure and Cavitation-Erosion Mechanism of Laser Cladding NiCrSiB Coating on CrNiMo Stainless Steel
Microstructure and Mechanical Properties of Weld in High Strength Low Alloy Steel by Ultra-Narrow Gap Welding
The Profile Curve of Die of Eccentric Shafts with Cross Wedge Rolling
Preparation and Rejection Properties of Positively Charged Polysulfone Hollow Fiber Membrane by UV-Photografting Polymerization
Control Factor Selection and Solder Residue Problem Study in Flip Chip Process
Surface Polishing of Metal Mold Using Wax-Coated Abrasive SiC Particles
Formation Mechanism of Alloyed Layer with W, Mo, Co Co-Diffusion in Pure Iron
Study of Protective Coating for Feed Tube in Aluminum Melt
Warm Stamping of Cell-Phone Cases with AZ31 Magnesium-Alloy Sheets
Study on the High-Temperature Coating in Preventing Oxidation and Decarburization
Effect of the Sulfurizing Layer on Tribological Properties of Netted Laser-Quenching Surface
Process Control of Injection Molding Based on Multiscale Visualization Methodology - A Case Study
Corrosion Evaluation for Aluminum Alloy (6262) in Aerated 3.5% NaCl Solutions under Hydrodynamic Conditions
Microstructure and Toughness Properties of Subcritically, Intercritically and Supercritically Heat Affected Zones in X80 Pipeline Steel
「Nielsen BookData」 より