Frontiers of manufacturing and design science : selected, peer reviewed papers from the 2010 International Conference on Frontiers of Manufacturing and Design Science (ICFMD2010), Chongqing, China, December 11-12, 2010

著者

• International Conference on Frontiers of Manufacturing and Design Science
• Chen, Ran

書誌事項

Frontiers of manufacturing and design science : selected, peer reviewed papers from the 2010 International Conference on Frontiers of Manufacturing and Design Science (ICFMD2010), Chongqing, China, December 11-12, 2010

edited by Ran Chen

（Applied mechanics and materials, v. 44-47）

Trans Tech Publications, c2011

• :[set]
• Part 1
• Part 2
• Part 3
• Part 4

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection brings together 820 peer-reviewed papers, on Manufacturing and Design Science, aimed at promoting the development of design and manufacturing science, strengthening international academic cooperation and communications, and exchanging research ideas. It is divided into: Chapter 1 Frontiers in Manufacturing Science, Chapter 2: Frontiers in Design Science, Chapter 3: Frontiers in Mechanics and Materials, Chapter 4: Frontiers in Automation and Information.

目次

Preface, Committees and Overview Chapter 1: Frontiers in Manufacturing Science Application of KingView and PLC in Tailing Cementation-Filling Automatic Control System Advanced Low-Carbon Technologies for Steel Manufacturing Process Study on the Credit Classification of Practicing Qualification Personnel in Construction Market Based on PNN Kohonen Neural Network - Based Performance Improvements for Wafer Photolithography Process with CONWIP Control Strategy Research on Control Performance of Micro-Milling System Based on Linear Motor Research on Deep Processing of Primary Products Based on DEA and Self-Adaptive Filter Forecasting A Mathematical Modeling of Heat Transfer in Continuous Casting Slab On Construction Mode for Training Electromechanical Professional Driven by Projects Research on the Global Forming Process of Straight-Drawing Pole in Automobile Lifetime Distribution Model of Port Facilities with Pitting Corrosion of Stochastic Processes Wireless Control Model Based on Rapid Prototyping Equipments Risk Analysis of the Production Line Type Design Based on the Lean Production Research on the Integration of CAD and MIS Systems Based on Flexible Manufacturing Model Evaluation of Urban Public Transportation System Based on Support Vector Machine A Trading Practice Based Trust Evaluation Model in Dynamic Virtual Enterprise Experiment and Simulation of Influence of Welding Parameters on Temperature in Friction Stir Welding Development of Monitoring and Control System for Laser Remanufacturing The Evaluation Method for Product Form Attractiveness Based on Miryoku Engineering Product Color Intelligent Planning Method Based on Multi-Emotion Supply Chain Coordination under Asymmetric Disruptive Demand Production Process Management for the Composite Component Manufacturing Workshop Research on Bionic Hive Modularization Technology of Disassembly Research on Double-Face Online Dynamic Balance Technology of Machine Tool Spindle Numerical Simulation of Chilled Cast Iron Camshaft in Sand Casting Process 3-D Flow Field Simulation for Extruding Part of Mixing-Extruding Machine Effect of Meshing Clearance to VIC Internal Mixer FEM Modeling and Mechanics Analysis of Flexible Roll Forming Research on Product Development Resource Allocation Modeling Based on Hierarchical Colored Petri Net Study on the Drawing and Trimming Springback Characteristics of Cylinder Shallow Shell of Tailor Welded Blanks Research on the Forming Limit Diagram Based on Laser Shock Forming Research on the Converse Design of Aluminum Alloy Connecting-Rod Slab Based on Casting-Forging Coordinates Process Temperature Variation of Concrete-Steel Deck Plate under Solar Radiation Evaluation on Environmental Corrosion Damage of Steel Domes Protection of Earthquake-Disturbed Workshop Building by Using Piezoelectric Smart Devices Analysis on the Design and Application of Prestressed Concrete Supporting Piles Optimal Design of Mechanism Parameters for Rolling-Cut Shear Research of Manufacturing System Based on Network Technology 3-D Mechanical Analysis of Magnetic- Pneumatic Microfabrication Stage The Simulations of Movements in the Process of Machining the Lathe Spindle Three-Level Supply Chain Coordination with Revenue-Sharing Contract and Rebate-Penalty Contract Structural Dynamic Analysis and Optimization of Precision NC Machine Tool Bed Based on the Unit Structure Evaluation of Green Technology Innovation Capacity of Automobile Manufacture Industry Optimize the Structure of Air Sparger for Stirred Bioreactor Effect of Different Crushing Methods on Gradation and Particle Shape of Recycled Aggregate Process Planning and Tool Design of Magnetorehological Jet Finishing Proposition of Framework for Quality Working Environment Based on Sustainable Design in Small Manufacturing Enterprises Residual Stress in Powder Metallurgy Green Compact Application of Computer Integrated Process System in the Pulp and Paper Industry Distributed Control System for Papermaking Production Line Research on Embedded Software Testing Data Generation System The Development of Nozzle Micro-Hole Abrasive Flow Machining Equipment Mechanism of Parameters Variation about Electronic Components Subjected to High Impact Loads Research on the Influencing Factors of Dynamic Characteristics of Electronic Injector Permutation Algorithm with Simulated Annealing for Laser Antimissile Problem Hybrid Mean Particle Swarm Optimization Algorithm for Permutation Flow Shop Scheduling Problem Research on Dynamic Characteristic Testing Method for Large-Scale Rolling Mill Servo Cylinder Research on NC Technology for High Speed Milling The Shell Molding Process Study for Mass Production of Single-Cylinder Diesel Engine Crankshaft The Kinetics Model Study of Al-Fe In Situ Composites and Applications Design of Middle-Small Enterprise Technology Service Information System Performance Study of Storage-Type Domestic Electrical Water-Heaters with Wedged Inlet: Unsteady Water Discharge Rate Acquiring PLC Data Based on OPC Techniques and Ethernet Effects of Multi-Step Welding Chamber on Extrusion Product Quality and Die Strength Application of Laser Metal Deposition for Fabrication of Titanium Matrix Wear-Resistant Coating and its Wearing Performance Study and Implement on Key Technologies of Ship-Welding Mobile Robot Novel High Precision Digital Curvilinear Displacement Sensor Job Shop-Scheduling Problems- Single Process Effect of Lubricant in Output Parameters of Milling Construction of the Optimal Milling Parameters Database for Radar Key Parts Numeration Simulation of Solid-Liquid Two-Phase Flow in Centrifugal Sewerage Pump Research on VSR Process for Large Machine Tool Body Development of Autonomous Bucket Wheel Reclaimer with Laser Vision The Experimental Research of the Multi-Layered Spaced Protective Structure with Stiffeners Penetrated by Projectile The Energy Absorption of Structural Target with Stiffeners Impacted by Projectile Impact of the Foamed Aluminum-Filled Structures Research on Maximum Profit of the Supply Chain under E-Commerce Environment Optimization Strategy of Bidirectional Join Enumeration in Multi-Core CPUS Research on Services Oriented Group Decision Support System Integrated Platform-Multiple Attribute Group Services Based System Temperature Variation History Prediction of Fully-Closed Adhesive Joint in Curing Process Simulation Study of Keyhole Formation during Laser Deep Penetration Welding A Method for Maintenance Scheduling in Manufacturing Systems Based on TPM and MFOP Experimental Study on Friction-Induced Vibration of Water-Lubricated Rubber Stern Bearing at Low Speed The Research on Path Planning of Wall Climbing Robot Based on Ant Colony Algorithm and Minimum Gravity Consumption Algorithm Finite Element Analysis of the Effects of Tool-Chip Friction on Cutting Temperature Field Development of Tool Electrode High Frequency Vibration Assisted Micro-Hole EDM Machine for Industry Environment Design on Thin Walled Ring Rolling Machine with Fixed Driven Rollers Design Method of Strip Would Die for Metal Extrusion Process Based on Fatigue Theory Study on Experiments of Nano-Abrasive Polishing in Hydrodynamic Suspension Liquid Effect of Laser Shock Processing on Sulfide Stress Corrosion Cracking of X70 Pipeline Steel Welded Joint Research and Application of Intelligent Humanoid Robot Portability of WSN Sensor Driver Using Abstraction Layer and FSM Research on Speed Monitoring and early Warning Method for Vehicles Based on RFID Sensor Tag Semantic-Based Optimal Deployment of Manufacturing Resources for Multi-Disciplinary Collaborative Manufacturing CAD/CAM/CAE for the Parallel Indexing Cam Mechanisms Flow Behavior Characteristic for Injection Process Using Nano-Yttria Stabilized Zirconia for Micro Metal Injection Molding (MIM) Research on Manufacturing Process Traceability in Tire Enterprise Higher Eigenmodes Vibration Cantilever's Resonance Frequency and Cantilever Spring Constant Looper Lifter Movement Simulation for Continuous Hot Rolling A Study of Selective Assembly for Product with Multi Mating Features Diagnosing National Culture Elements for Successful TQM Implementation: Case Study in Libya Design of Rolling Tool System for Fin Forming Machine Influence of Ice Covering on Stiffness of Tower Components Green Manufacturing: A Lever-Wedge Self-Locking Force Amplifying Clamping Device Driven by Linear Motor Virtual Maintenance Process Modeling and Simulation Human Factors Assessment Based on the Technology of Human Motion Capturing Modeling of Shape Memory Alloy Based on Hysteretic Nonlinear Theory Automotive Modeling Design of Semiotics Decipher Design of a New Non-Contact Torque Sensor for Rotating Stepped Shaft by Monitoring Magnetic Field Production Planning Considering Transfer Lot Size An Implementation of Intelligent CNC Machine Tools Dynamic Method for Portfolio Choice of Manufacturing Processes Based on Copulas Integrated Teaching Reform of Hydraulic Structure Major Using CDIO Study on Isolation Monitoring of High-Voltage Battery System Lock-in Infrared Thermography for the Non-Destructive Testing of Fatigue Specimen with Defects Residual Stress Simulation of Stud Welding in a Rectangular Steel Tubular Surface Suppression of Maglev Track-Induced Self-Excited Vibration Using an Adaptive Cancellation Algorithm Analysis of Cause for China's Food Safety Problem Based on Profit Distribution Structure in Supply Chain Research on Constructing an Approximate Topological Graph and its Path Planning Production of Bacterial Cellulose by Gluconacetobacterxylinus Using Taguchi Methods Assessment of Damage from Organic Protective Coating Treatments to Historic Stone Buildings and Sculptures Research on Green Shipbuilding and Concurrent Green Ship Design Study on the Intelligent Fault Diagnostic Flat for the Shipboard Equipment Based on the Virtual Instrument and Wavelet Neural Network Product Integrated Innovation Based on Functional Hybridization CIM-Based System Integration and Multi-Agent Modeling for Life-Cycle Smart Grids Assets Management System Simulation Analysis on Dynamic Performance of Drilling Shaft Mechanism in PCB CNC Drilling Machine Dynamic-Performance Research of Placement Machine State Feedback Control to Track a Moving Object for a Non-Holonomic Mobile Robot Optimal Design and Simulation on the Major Linkage Parameters of a Harvesting Manipulator Kinematics Analysis and Simulation of a 4-DOF Manipulator Remote Path Tracing Research of Educational Mobile Robot Fault Simulation Research of Hydraulic SOV Based on AMESim Fabrication Technology of Involute Micro Gear Based on Two-Photon of Femtosecond Laser Simulation on Observe Compensation Control for Electric Disturbances in CNC Servo System Study of the On-Line Monitoring on the Effect of Laser Shock Processing for Residual Stress by the Properties of Acoustic Wave Buffet Effect Simulation Model on Demand Chain Management Two Dynamic Propagation Problems of Symmetrical Mode III Crack Hardware-in-Loop Simulation on Hydrostatic Journal Support Pose Calibration of Line Structured Light Sensor for Robotic Inspection System Improving the Accuracy of Robot-Based Measuring System by Calibrating Laser-Stripe Scanner Model and Hand-to-Scanner Transformation Identification of the Dynamic Properties of Linear Joints Using Substructure Synthesis Method Identification of Frequency Response Function of Shaking Table with a New Estimator High Speed Noncontact Displacement Measuring System Using FPGA EMR System for Orthodontics Based on Flex and SSH Modeling and Simulation of the GA_LSSVM-Based Soft Measurement for Torque Force Closure Analysis for an Underactuated Robot Gripper Optimal Design for Heavy Forging Robot Grippers Design of Milling Cutter for Machining Helical Curved Surfaces The Modeling and Simulation of Sheet Metal Flexible Manufacturing System Based on eM-Plant Profile Error Synthetic Analysis of One-Side Milling of the Inner Engaged Globoidal Cam Reconfigurable Intelligent Instrument Based on FPGA An Adaptive Location Updates and Propagation Scheme for Mobile Sinks Study of Improving Precision of Nonlinear Gear System with Clearance Using Numerical Approximation Value Chain-Based Business Process Optimization Modeling for the Third Party Logistics Enterprise Tracking Compensation of a Moving Target for a Biped Robot Based on Vision Sensor Stability Analysis of Supply Chain Cooperation Contract under Asymmetric Information Analysis on Meaning and Current Research of Holonic Manufacturing Execution Systems Critical Success Factors of Re-Engineering in the Production Process: SMEs Sector of Bangladesh Evaluation and Decision Making on Advanced Manufacturing Modes Based on Object-Based Knowledge Mesh and User Satisfaction Research on Multi-Mode Driver Fatigue Detection System Application of Physics of Failure Method in Reliability Design of Electronic Products Modeling of Servo 4-Stage Gear Transmission System and Influence Analysis on Resonance Frequency Study on Reliability Test Methods of Machining Center Reliability Test Design for Five-Axis Machining Center Design and Implementation of WSN Visualized Management System WSN Networking Protocol Based on Dynamic Changing Channel An Abnormal IP Traffic Detection Model Based on Scale-Free Network Optical Fiber Temperature Measurement Technique Based on Fluorescence Mechanism Study on System of 3D Virtual NC Machining Environment Hand-Eye Calibration of Machine Vision System for Manipulator Yield Management with SD Model Based on Customer Lifetime Value in Semiconductor Industry Machine Tool Selection Based on AHP and ACO Cutting Force Induced Error Prediction and Compensation Based on Feed Servo Motor Current Modeling and Kinematics Simulation of HT-CVT Based on Virtual Prototype Technology An Agent-Based Framework for STEP-NC Controllers of CNC Machine Tools New Exploration of the Nature of Packet Matensite The Model and Simulation of the Potato Harvester Grouping Rank Product Meta-Analysis Method for Identifying Differentially Expressed Genes in Microarray Experiments Research on Logistics Activity Cost Control Procedures Based on ABC in Manufacturing Enterprises Manufacturing Method of PM Components with Integrated Information Storage Three-Dimensional Finite Element Modeling and Front Crash Process Analysis of Car Bodywork Numerical Simulation of MEMS Stirling Cooler Development of Numerical Method for Prediction of Maneuvering Performance of Marine Vehicle Synchronization Motion of Four Supports Hydraulic Platform with Unbalanced Loading and Uncertainties Research of System of Trailer Axle's Function Test Study of Air-Fuel Ratio Analyzer Based on CAN Bus Research of Analysis System for Citrus LAI Spectrum Data An Open CNC System Based on Motion Controller Study on Supplier Selecting System Oriented Networked Manufacturing Finite Element Analysis and Structure Optimum of Rectangular Cylinder An Investigation Hydrodynamic Fluid Pressure at Wedge-Shaped Gap between Grinding Wheel and Workpiece Modeling and Predicting Roughness of the Abrasive Jet Finishing with Grinding Wheel as Restraint The Intelligent Question Band Management System of Engineering Graphics for Multiobject Theoretical and Numerical Modal Analysis for Nuclear Coolant Pump and its Scaled Rotor System Numerical Simulation Investigation on the Temperature Field Distribution and Variations in Hot Stamping Process Implementation and Analysis of TML Based on Different Transport Protocols Double Inlet Cyclone Separators for Natural Gas Dehydration Research on Orthogonal Polarized Dual-Frequency Laser Beat Frequency Detection Quality Prediction of Laser Cladding Based on Evolutionary Neural Network Finite Element Modes Analysis of Involute Planetary Gear in RV Reducer Dynamical Formulation and Analysis of Double Crank Ring-Plate-Type Pin-Cycloidal Gear Planetary Drive Shrinkage Analysis of Injection-Compression Molding for Transparent Plastic Panel by 3D Simulation Research on Active Vibration Isolation System for Precision Instrument Based on Four Piezoelectric Stack Actuators Transfer Model of Transverse Asymmetry Characteristic in Standers during the Steady Hot Rolling Stage Application of Embedded System in the Train Information Management System Chapter 2: Frontiers in Design Science The Inner Equilibrium Analysis and Counterweight Design of Engine Sliding Mode Variable Structure Control for Electric Power Steering System Mechanical Stability Analysis of Subsea Wellhead for Deepwater Production to Earthquake Load EDM with USM Combination Process of Sintered NdFeB Permanent Magnet Research on Reed-Solomon Code in Complementary Code Keying Modulation Technology Method of Multi-Attribute Decision Making for Interval-Valued Intuitionistic Fuzzy Sets Based on Mentality Function Design of the Hydraulic Press Assembling the Coupling Based on the Virtual Prototype Technology Machining Error Analysis and its Compensation Using Fuzzy Inference in Crankshaft Non-Circular Grinding PMSM Servo System Control Based on Disturbance Observer A Linear-Encoder-Based Displacement Sensing Approach for Cost-Sensitive Applications Hydraulic Model Experimental Study on Coherent Jet Flow Field Fault Diagnosis to Mid-Size Excavator Hydraulic System Based on Fault Tree Analysis Information Entropy of Rolling Bearing Friction Torque as Data Series Dynamic Prediction of Rolling Bearing Friction Torque Using Lyapunov Exponent Method Uncertainty of Rolling Bearing Friction Torque as Data Series Using Grey Bootstrap Method Feature Selection Method for Hydraulic System Faults Diagnosis Based on GA-PLS Multidisciplinary Robust Optimization Design of Multi-Functional Open-Air Hydraulic Drill Design of Guide Rail in a Multi-Functional Open-Air Hydraulic Drill Energy-Saving Design for Hydraulic Cylinder Reciprocating Seal Based on QFD Study on the Micro-Replication Precision of Shark Skin Research of Strength of Rotor System about Containing Blade Crackle Based on Nonlinear Dynamics Innovation and Practice of Numerical Simulation Teaching Platform of Engineering Test Courses Grating Nanomeasurement and Implementation Technology Based on TMS320F28335 Research on the Sensitivity Damage Identification Method Based on Closed-Loop Feedback Control Numerical Investigations on the Mechanical Properties of Dry End Milling Numerical Simulation of Root Effect of Prestressed Anchor Cable Group Application of Stereographic Projection in the Search of Key Block of Surrounding Rock Mass for Underground Powerhouse Analysis of Singular Integral of Fast Multipole-BEM Applied in Three-Dimensional Elastic Contact Problem Thermo-Mechanical Analysis of Torpedo Car Inversion of Initial In Situ Stress Field by the Method of Multivariate Analysis and Engineering Application The Simulation of Heat Pipe Evaporator in Concentration Solar Cell A Three-Dimensional Hydrodynamic Lubrication Model for Chemical-Mechanical Polishing Considering Pad Roughness Electromagnetic Interference's Effect on the Performance of Electro-Hydraulic Control System Mechanics Analysis on Leveling Tool of Offshore Jacket Platform The Presence Research on 6-DOF Tank Driving Simulator The Study of Forklift's Overall Design System Based on Design Knowledge Reuse Modeling and Performance Analysis of Combined-Cycle Based Ship Power Plant Design of Debris Shield of Powered Support with 6.2M Large Mining Height A New Numerical Approach for Adhesive Contacts of Real Engineering Surfaces Simulation Analysis on Transmission Function of Parallel Indexing Cam Mechanism Based on Adams Study on Green Innovative Design Based on Function Analysis Vibration Performance Analysis of FR Vibration Damper Using Finite Elements Method A Multibody System Model for Meshing Gears Robot Indoor Navigation Method Based on 2D Barcode Landmark Analysis of the Flow and Regeneration Characteristics of Screen Mesh and Parallel Wire Regenerators Trajectory Generation of Spray Painting Robot Using Point Cloud Slicing Innovation Design of Hand Tools Based on User Experience Finite Element Simulation of Cyclic Channel Die Compression with Route A Design & Fabrication of a MEMS Piezoresistive Accelerometer with Beam-Film Combined Structure An Integrated Variant Design Method of Dimension and Dimensional Tolerance A Research of Stereo Vision Positioning under Vibration Influencing Factors Analysis on Regulating Effect of the Pintle Controlled Thrust Regulating Mechanism Finite Element Analysis and the Topology Optimization of a Bracket-Cable Design and Implementation of RF Front-End for GPS Receiver Utilizing Discrete Components Greedy Algorithm Based Multiple Target Searching for Mobile Robots Develop a Vision Based Auto-Recharging System for Mobile Robots Logarithmic Spiral Bevel Gear Tooth Contact Inspection Model Analysis of Micro-Feed Tool Holder Based on Finite Element Simulation Design and Integrated Simulation of the Electro-Hydraulic Servo System Based on AMESim and Matlab Study of Combination Character Based ANN and one Dimensional Optimization in Axial-Flow Water Turbine Groundwater Level Forecasting Based on Support Vector Machine Structure Analysis of UPC Type 3-DoF Rotational Spatial Compliant Parallel Manipulator Structure Synthesis of 3-RRS Type Spatial Compliant Parallel Manipulator Modeling and Analysis on Servo Adjustment of Bidirectional Variable Displacement Pump in Hydraulic Drive System of the Cutter Head in a Shield Tunneling Machine Modeling and Simulation of the Dynamic Characteristics of a Hydraulic Power Limiting Valve with Two-Spring An Improved Algorithm for Tooth Contact Analysis for Hypoid Gear Based on Axial Section Programming Design and Implementation of an Active Power Filter Fuzzy Neural Network Based Coal-Rock Interface Recognition A Method to Improve Human-Computer Interaction for Shape Design, Based on Empirical Data Design of Remote Controller Using Code Matching and Frequency Hopping Technology Analytical Design for Parallel Cascade Control of Multiple Degrees of Freedom Research and Realization on the Voice Command Recognition System for Robot Control Based on ARM9 Dynamic Characteristics Research of Self-Swinging Control System with Valve-Controlled Cylinder Device for Liquamatic Fire Water Monitor Research on the Parameters of Phononic Crystals Suitable for Automotive Noise Control Fuzzy Integrality Design for Maglev Networked Control System with Sensor Data Dropouts Study on Wire Breakage in WEDM by 3D Technology A New Formal Method of Anticorrosion Design The Design of Screw Extrusion Mechanism Based on Melted Extrusion Modeling Design and Testing of a New Metallic Solution for Toecap Component on Safety Footwear Finite Element Analysis and Structural Parameters Optimization of Piezoelectric Vibration Energy Harvester Identification-Free Adaptive Separate Layer Water Injection Control Based on Expert Amendment Research and Application of Synchronous Dynamic Test and Adjustment Technology for Novel Water Injection Well Theoretical Study on Overlapping Mechanism in SLM Based on Interlayer-Staggered Scan Strategy Finite Element Analysis on the Large Deformations of Rubber Structure Optimal Control of Semi-Active Suspension Based on ADAMS and MATLAB/Simulink Optimization of Fuzzy Logic Rules Based on Improved Genetic Algorithm Engineering Design and Analysis for Four-Legged Steel Trellis Column Intelligence Optimization Design Model of Deep Cement-Stirring Pile Multi-Lookup Table Based Regenerative Braking Strategy of Plug-in Hybrid Electric Vehicle Dynamic Characteristic Research on Thin Rim Structure for Herringbone Planetary Gear Train Dynamic Modeling and Numeration of Flexible Multi-Body System with Closed Loop Multi-Objective Optimization Design of the Helical Gear Transmission Based on Coalition Cooperative Game Theory Design and Implementation of Mobile Objects Tracking System Based on Wireless Sensor Network Application of Dual-Mode Switching Threshold Controller to Autonomous Carrier Robot A Distribution Model of Electric Vehicle Charging Station Analysis of the Leakage for Hydraulic Slide Valve Spool Research on Harmony of Interior System of Railway Passenger Cars Analysis of Crankshaft Fatigue Strength Based on Integrated Finite Element Model A Method to Measure the Dynamic Response Time for an Electronic Fuel Injector Error Compensation Based on Differential Operators and Electro-Optical Collimation Intelligent Charger Design of Electric Bicycle Based on SCM Optimization of Photovoltaic-Electrolyzer System by Direct Coupling A New Feature Fusion Method for Handwritten Character Recognition Based on 3D Accelerometer Motion Modeling and Simulation of High-Speed Unmanned Surface Vehicle Research on Conceptual Design Process for All-in-one Computer Green Design Based on the Concept of Ecological Holism Hybrid Calculation Method of the Sound Transmission Loss of the Engine Air Cleaner Cooling Simulation of External Gas-Assisted Injection Molding A New Framework for the Accurate FE Model of Bone Tissue Based on CT Images The Correction Research of Camera Installation Error for Vision-Guide Mobile Robot Image Tracking and Analysis Algorithm by Independent Component Analysis Micro-Measurement of the Virus-Infected Region Using NIS-Elements System Discussion on the Vacuum Pre-Cooling Rate of Vegetables A Fault-Tolerant Router Algorithm Based on Hamiltonian Cycle in Wireless Sensor Network Cross-Coupled Synchronized Control for Bi-Cylinder Servo System Simulation of Wireless Acoustic Sensor Network Localization System Using True Time Study of Electrochemical Finishing with High-Frequency Group Pulse Study on the Drive/Brake Features of Vehicle with Electric Control and Hydrostatic Drive Numerical Calculation Analysis of Structural Parameters of Water-Lubricated Thrust Bearing Research on Switched Reluctance Generator for Off-Grid Variable-Speed Wind Energy Applications Nonlinear Behavior in Current Mode Research of Z-Source DC/DC Converter Bifurcation Analysis for Sailing Stability of Autonomous Underwater Vehicle Impacting Analysis on the Coupler and Buffer of a Subway Vehicle for the Shunting Operations Kinematics and Strength Analysis on Variable Propeller Pitch Mechanism of a Wind Turbine Generators A New Spurts Controllable Electrospinning Collecting Device Designed Basing on Advanced Motion Control Modeling and Simulation for Dual-Drive Transmission System of TBM Based on Bond Graph Design of Injection Mould for Cars' Interiors Based on CAD/CAE Technology Study on Realtime Information Integrating System Orienting Enterprise Analysis of Three-Phase Power Transformer Inrush Current Magnetic Field Comparison on Simulation and Experiment of Supply Air through Metro Vehicle Air Conditioning Duct Analytical Solution to Excited Waveform of Bias Control on Electro-Hydraulic Vibration Exciter Stiffness Matching and Ride Comfort Optimization of Heavy Vehicle's Suspension Based on ADAMS Simplified Evacuation Planning Model on Naval Ship Application and Prospect of Pneumatic Servo Manipulator in Medical (Surgical) Research on Control System of Pump and Valve Parallel Connection Numerical Model of Organic Light Emitting Device with Different Thickness Study on Banded Structure in Low Carbon Vessel Plate for Nuclear Power Plant The Research on Pure Water Hydraulic External Gear Pump Devise of the RCF Test Rig for Ceramic Bearing Ball by Design Methodology The Operation Control Technology of Wind Generating Set Simulation of Vector Control Strategy of PMSM Based on MATLAB Numerical Simulation of High Velocity Impact with SPH Frictionless Contact Algorithm Design of Status Monitor System for the Locomotive Bearings Based on WSN The Research on the Driver Steering Behavior under Emergency Constructing a Class of Four-Dimensional Correlative and Switchable Hyperchaotic Systems Fault Signature Analysis Based on Transient Current for Induction Motors Characteristic Analysis of Plasma Arc Adjusted by a Magnetic Field An Evolutionary Lagrange Method for Mechanical Design Rigid-Flexible Coupling Dynamics Analysis of Clock Mechanism Topological Optimization of Frame of High Speed Hydraulic Press Based on Generalized Finite Element Modules Gapping Factor Analysis of Heavy Hydraulic Press with Whole Pre-Tightening Assembled Frame Numerical Simulation of Atmospheric Pressure Plasma Jet Using Lattice Boltzmann Method Optimal Kinematic Design of a 2-DOF Planar Parallel Manipulator Inverse Dynamics Analysis of a 2-DOF Planar Parallel Manipulator Global Radiation for Solar Architecture Design of Taiwan An Analysis of Cultural Factors in High-Speed Train Design - Taking Virgin Pendolino High-Speed Train as an Example Robust Reliability Design for Networked Control Systems Based on State Observers Risk Study on Subway Construction Based on Reliability Theory Analysis on Cogging Torque of Permanent Magnet Synchronous Motor for NC Machine Tool Servo-System Study on Modeling of Growth Conceptual Design A Novel Deign Method of Laser Diode Power Supply Development of Automotive Electronics HIL Simulation Experimental Platform Mechanical Analysis and Study on Structural Parameter of Partially Earth-Anchored Cable-Stayed Bridge Part I: Mechanical Analysis Mechanical Analysis and Study on Structural Parameter of Partially Earth-Anchored Cable-Stayed Bridge Part II: Parametric Study Optimization Design of Diffusers for Supersonic Separators Mechanism Analysis of Automobile Brake Groan Based on Seven Degrees of Freedom Model Numerical Investigation of the Influence of Friction Coefficient on Brake Groan Design and Simulation of Single-Phase Photovoltaic (pv) Inverter Circuit The Thermal Influence of Green Roofs on Air Temperature in Taipei City Research on Modeling Design of Mobile Computer Steady-State Thermal Analysis and Temperature Control of High-Speed Permanent Magnet Synchronous Motorized Spindle Research on Meshing of Face Gear Drive under Errors of Alignment and Machining Establishing 3D Mandible FEA Model via Clinical CT Images Design and Modeling of a 2-Dofs Wave Energy Converting Device for Underwater Vehicles Research on the Half-Real Simulating Experimental System of the Automotive Power System Open Architecture Automotive Electronic Control System Based on Quantum Frame and SAE J1939 Open AMT Control System Based on Quantum Frame Design and Optimization of a Piezoelectric Thrust-Measuring Platform for Attitude-Control Rocket Engines A Novel Fusion Method for Multi-Focus Images Mechanical-Design-Oriented Knowledge-Driven Model Improve the Free-Piston Stirling Engine Design with High Order Analysis Method The Numerical Simulation of 2D Sloshing Tank Numerical Study of Cavitation on Hydrofoils Influence of Porous Media Property on Stirling Engine Performance Design and Simulation for a Carton Packaging Robot Study on the Method of Humanized Design Research on Guarantee Equipment for Setting Load of Hydraulic Supports A Method Research of Intention Expression Based on Design State Model Test Study on a Single Diagonal-Span Arch Bridge with Curved Beam Electronic Document Management System Oriented Collaborative Design Evaluating the Effectiveness of Applying Phenolic Resin as Thermal Barrier in Buildings during Summer and Winter Condition Monitoring and Life Prediction of Rolling Guide Based on Hybrid Intelligence Design of a Gas Sensor for Hydrazines Based on Photo-Ionization Principle Design, Preparation and Application of Dual-Color HgCdTe Infrared Sensor Early Fire Detection of Large Space Combining Thresholding with Edge Detection Techniques Finite Element Analysis of Different Flexure Springs Fuzzy Adaptive Variable Structure Active Attitude Control of Flexible Spacecraft Research on Multi-Disciplinary Behavior Coupling Model in IC Engine Scheme Selection of Product Energy-Saving Design Based on Data Envelopment Analysis An Extension of Apriori Algorithm to Discover Individualized Treatment Optimization of Breast Cancer Extension of Traditional Frequency and Research on Time-Frequency Distribution Research of Fault Feature Extraction Based on High Order Cyclic Statistics for Reciprocating Compressor Gas Valves Chapter 3: Frontiers in Mechanics and Materials The Study of Products Design & Developement Using Virtual Clay Modeling System Study on Energy Spectrum Analysion of Three Kinds of Traits of Haematitum Study on Determination of the Content of Fe2+,Fe3+ in Medicine Haematitum with Different Characters Research on Path-Planning of Manipulator Based on Multi-Agent Reinforcement Learning Treatment of Steel Rolling Oily Wastewater: Performance of a CTAB Modified Resin Fixed Column Effect of Different Cooling Speed and Rare Earth La on the Microstructures and Phase Constitution of Al-Fe Alloy Analyzing the Modality of Two-Dimensional Photonic Crystal Fiber Optical Micro-Resonators by Equivalent Refractive Index Mode Synthesis and Characterization of Nano-Calcium Titanate-Based Coated Aluminum Oxide and its Application in Water Analysis of Cr(III) and Cr(VI) Concentration Preparation and Characterization of Nano-Strontium Titanate Based on Glass Fiber Filter and its Application in Adsorption of Heavy Metals Formation of the Cast Iron Coatings Plasma-Sprayed at Different Substrate Temperatures Thermal Expansion Coefficient of Ni Base Alloy Composite Coating Containing Spheroidal Ceramic Grains Research on Fatigue Test of LZ20Mn2 Axle Pipe Steel Technique of Heating Process of Stainless Steel Dynamic Scheduling Method for Steelmaking-Continuous Casting Wear and Breakage Features of Multi-Coated Tools in Turning Hardened Steel Study on the Synthesis of Lithium Titanate Compound as Anode Material for Lithium Ion Battery Technology Optimization on Preparation of Silicon Dioxide from Rice Husk Effect of Carbon Nanotubes on Friction and Wear Properties of Glass Fiber/Epoxy Composites Weighted Cost Rate-Based Heuristic Scheduling Method for Semiconductor Furnaces Characterization of Polyvinyl Alcohol-Polyaniline Blend Films Preparation and Characterization of Polyacrylonitrile-Polyaniline Blend Nanofibers Preparation of Ag-Polyacrylamide Nanocomposites by Ultraviolet Irradiation Technique The Development of High Strength Hull Steel Plate FH40 Study on Thin Extended Octagonal Ring Elastomer Thermal Analysis of Concentrated Photovoltaic System Strength Analysis of Damaged Composite Laminates Repaired by Scarf Bonding Method Based on Three Dimensional Model Experimental Research on Heat Transfer Characteristics of Tube Bundles of Different Materials under Vacuum Conditions The Constrained Stress-Induced Reverse Martensitic Transformation Characteristic of Fe-Mn-Si Alloy Embedded in Cement Matrix Effect of Mn Doping on the Photocatalytic Photodegradation Properties of Zn1 xMnxO Nanomaterials Mould Design of Self-Healing Composite Gear Investigation on the Effect of Crack Length on Mechanical Properties of Functionally Graded Materials Hydration of Water Entrained Cement Paste under Saturated Condition Methods to Describe Optical Polarization State in Reflective Fiber Optic Current Sensor Structure and Electrochemical Properties of Li1-XNi0.5Mn0.5O2 Thin Film Using Different Raw Material by Sol-Gel Method Size Dependent Strength of Fiber Eutectics and Transformation Particles Composite Ceramic A Calculating Method for the Movement Contrail in the Operation of Dressing the Profile Shape of Grinding Wheel Used for Numerical Control Form Grinding Spur Cylinder Gear Study on Stress-Strain Constitutive Relations of Longitidinal Compressing Elm Wood The Fiberboard of Hot Pressing Process Optimization and Combination Performance Characterization Poly (Lactic Acid)/Wood Fibers Biodegradable Composites Studies on the Dye-Uptake of Fraxinus Mandshurica Veneer with Reactive Dyes Surface Roughness Prediction in Precision Surface Grinding of Nano-Ceramic Coating Based on Improved ANFIS Solid State Synthesis and Characterization of Spintronics Material Cd0.55 Hg0.45 Te The Effects of Young's Modulus of Materials on the Rolling Resistance Characteristics of Ball Bearing Preparation and Photodegradation of Humic Acid by a Y3+-Doped ZnO/TiO2 Composite Preparation and Friction Feature of TiAl-Based Wear-Resisting Self-Lubricating Composite Numerical Simulation on Dynamic Cushion Properties of Spruce Wood in Three Kinds of Impact Directions Effect of Different Clamping Modes on Dimples of Sheet Metal Parts in Multi-Point Stretch Forming An Adaptive Loading Mechanism Based on Logarithmic Spiral Profile Connection for Planetary Traction Drives Temperature and Rate-Dependent Constitutive Relationship for Vanadium Alloy V-5Cr-5Ti and Failure Modes Numerical Simulation on Drop Test of the Conical Shell Durability of Concrete Structure Research and Development Direction Experiment Study on the Deformation of Reinforced Concrete Slabs Workability Evaluation of Self Compacting Concrete Development of Building Materials from Expo 2010 Shanghai Static and Dynamic Behavior of Granite in Split Tension Structure and Properties of Ag-Polyacrylamide Nanocomposites by Heat Treatment PVA/MWNTs Composite Nanofibers Prepared by Electrospun Preparation and Properties of Polyvinyl Alcohol/Polyvinyl Pyrrolidone Blend Films Influence of Heat Treatment for the Microstructure in GCr15 Bearing Steel Erosion Wear Behavior of TiAlCrN Coating on Hard Metal Impacted by Solid Particles Homogenization Analysis of Effective Mechanical Properties of Nano-Composites with Non-Linear Material Components Experimental Study of Assembly Clamping Pressure on Performance of PEM Fuel Cells Optimization of Channel Dimensions in the Flow-Field for PEMFC Thermal Properties of Ester-Type Easy Cationic Dyeable Poly(ethylene Terephthalate) (ECDP) Polymers Lattice BGK Simulation of Hydromagnetic Double-Diffusive Convection in a Rectangular Enclosure with Linearly Variable Temperature and Concentration Gradients Synthesis and Properties of a Novel Borate Ester Surfactant Containing Nitrogen as Textile Oils A Study on the Performance of Drinking Fountain Using CO2 Heat Pump under Different System Pressures Effect of Autoclaved Aggregate Structure on Strength of Concrete Simulation of the Effects of Boundary Energy on Microstructure Evolution in Nanocomposite Ceramic Tool Material Dynamic Model of the Road Feel Generation System in Advanced Driving Simulators A Three-Phase Constitutive Model and Experimental Study for TiNiNb Shape Memory Alloys Study on the Effect of WC-Co Macro Interface Structure on PDC Performance Mechanism of the Effect of Interface Structure on the Thermal Stability of Polycrystalline Diamond Compact Porous Silicon Immunosensor for Label-Free Detection of SpaA Utilization of the Surplus Materials from the Processing of Bamboo Flooring by Enzyme Aluminum Car Wheel Molding Methods and Numerical Simulation of Forming Process Texture Based Infrared Military Target Extraction VOF Simulations of Gas Bubbles Motion in a Reciprocally Stirred Flow Numerical Study on Impingement of a Droplet upon a Liquid Film Fabrication of TiN/Al2O3 Composites by a Novel Method Synthesis of Ti2AlC and Ti3AlC2 by Mechano-Chemical Reaction and Hot Pressing Process Top-Down Formation of GaN Nanocone Arrays for Application in Field Emission The Biaxial Stress-Strain Curves of Sheet Metals Digital Imagine Correlation (DIC) Method for Detecting Crack Development in Construction Materials Subject to Loading Molecular Simulation on Modification of Structure and Thermodynamic Properties of Montmorillonite Influence of Structural Sealant on Mechanical Behavior of Hidden Frame Curtain Wall Joining Aluminium to Red Copper by High-Frequency Induction Brazing with Argon Shielding Design of a Flexible Bending Biomimetic Octopus Arm Unit with Embedded SMA Wires Research on the Hydrodynamics of a Horizontal Trigonal Pectoral Fin Propulsor Actuated by SMA Wires Determination of Mercury Ions by Using Nano Gold Plate Electrode Based on Amino Thiol Self-Assembled Film Fatigue Test Research for SPR Aluminum Alloy Sheet Preparation of Activated Carbon from Waste Particle Board by K2CO3 Activation Treatment Research on Fiber-Optic Strain Signal Processing Based on Demodulation Technique Three-Dimensional Finite Element Simulation of Cylindrical Turning of Titanium Alloys New Application of Lap Laser Welding on Stainless Steel Railway Vehicles Ca2Si Crystal Grown Selectively by the Low Temperature Annealing Evaluating Mechanical Properties of Cement Materials by Depth-Sensing Indentation Method Effect of Curing Time on the Pore Structure of the Portland Cement Concrete Variation for Soil Stress on CPTU Model Test Simulation of Electrolytic Cleaning for Cold Rolled Strip Design of Thermal Transferring of Plane Mould for Low Pressure Sheet Molding Compound Research on the Molding Parameters for Low Pressure Sheet Molding Compounds The Force and Wear of Carbide Mill in Milling Glass Automatic Inspection of Typical Microstructure Defects Based on Image Processing Techniques Study on the Control System of the Electro-Controlled Steering Damper Based on Magnetorheological Fluid The Joint Measurements of Electroluminescence and Photoluminescence of PET Films under Low Temperature Nano Inorganic Particles to the Doping and Influence of Polyimide Electric Breakdown Fracture Mode of E50 Solder Notched Bars at Low Temperature Fracture Test on High Strength Steel Plates with Elliptical Hole Dynamics Characteristic of a Linear Oscillator with Nonlinear Damped Attachment as Energy Absorber A Stress-State Related Void Coalescence Criterion and its Validation QFD-Based Analysis of Quality Functional Requirements of Wooden Acoustic Panels Galloping of Transmission Tower-Line System and Anti-Galloping Research Study on Numerical Simulation of Iced Conductor Galloping for Multi-Span Power Transmission Lines Nonlinear Numerical Simulation of Iced Conductor Galloping Analysis of Surface Morphology Characteristics in Mechanical Finishing and Electrochemical Mechanical Finishing FE Simulation on Temperature Field of the Flexible Forming by Plasma Arc Mechanism of Whisker Growth on Pure Sn Coating of Cu Leads in the High Temperature/Humidity Storage Tests Exploration of Teaching System Reform in Modern Engineering Graphics Comparative Research on Stochastic Resonance of Piecewise-Linear Model and Bi-Stable Model Multiple Performance Optimization for the Best Injection Molding Process of Ti-6Al-4V Green Compact Predictions of Mechanical Properties of Single Crystal Copper Nanorod with Multiscale Simulation Method Application of Multivariable Grey Prediction Decision-Making Based on Dempster-Shafer Evidence Theory and its Application in the Product Design Imitation Study of Hybrid-Driven Five-Bar Mechanism Output Movement Characteristic Based on Kinematics Analysis Cold Forging Process Analysis and Precision Progressive Die for Cam of Low-Carbon Steel Study on Manufacturing Craft of Wood-PSt Composite Study of Vehicle Interior Annoyance Based on Different Exhaust Configurations Micro CO2 Sensor Based on Li2CO3, Pt | Li3PO4 | Pt, Li2TiO3-TiO2 Structure Study of Multi-Roll Stretch Forming Process Using Different Clamps Axle-Equivalent Method for Concrete Bridge Deck Thin Pavement Spark Plasma Sintering Behavior of 93W-5.28Ni-1.32Fe-0.4Y2O3 Heavy Alloy Powders Structure Design of pin Round Punch for Stamping Stainless Steel Sheets A Calibration Method for Distributed Optical Fiber Temperature Sensor Research on Forming Technology of Electron Beam Selective Melting for Ti-6Al-4V Powder ITO Transparent Conductive Films Prepared under Non-Vacuum Conditions Study on the Fatigue Reliability Model Based on Probability Distribution of Fatigue Life under Spectrum Loading Experiment on Thin Structure Behavior of Explosion Flame Flow Field Stress Calculation of Fillet Rolled Crankshaft in Bending Fatigue Tests Epoxy Specimen Fabricated by Rapid Prototyping Method for Photo-Elastic Technique Microstructures and Mechanical Properties of Si and Sb Added Mg Alloy The Study of Chemistry Precipitation Method Extraction Magnetic Ferric Oxide from Chromium Dregs Research on Compressive Performance of Honeycomb Paperboard Research on Unwinding Tension System Control Based on Inverse System Theory The Stress Field of Plane Flat Lap Interface End of Orthotropic Bi-Material A Design in the Optimal Precision Forging Process about Transmission Shaft Flange Yoke The Evaluation of Ductile Fracture Criteria (DFC) of 6061-T6 Aluminum Alloy Research on the Properties of Milling and the Process Parameters Optimization for Aluminum-Alloy Thin-Walled Parts Numerical Analysis of Exfoliation Corroded Holed Aluminum Plates Repaired with Adhesively Bonded Composite Patches Study on Fatigue Crack Growth Behavior of Casing-Drilling Steel N80 Forming Modeling of Tailor Rolled Blanks & Applied Keys in Panels Study on Parameters for Affecting SCI of Sheet Metal Forming Investigation of the Milling Performance about Titanium Alloy Based on Orthogonal Experiment The Characterization and Flow Behavior of 316L Stainless Steel Feedstock for Micro Metal Injection Molding ( MIM) Study on Bidirectional Controllable Flexible Bending Joints Based on Elongation Artificial Muscles Structural Design and Position and Posture Analysis of Five-Fingered Robot Hand Based on Pneumatic Flexible Joint Synthesis of Titanium Disilicide by the "Chemical Oven" Self-Propagating Combustion Method The Straight Bevel Gear with Equal Conjugate Curvature The Analytical Method of the Construction of the Profile of the Basic Rack for Equal Conjugate Curvature Mechanical and Pneumatic Coupling of the Pneumatic Motor with Offset Swinging Planetary Drive of Bevel Gears Research on the Swinging Planetary Drive and the Swinging Planetary Pneumatic Motor Fundamental Equations of Load Deviation of the Gears in Compound Gearing Experimental Studies on Cold Extrusion of Thin Wall Ultra-Deep Blind Hole about 7A04 Recoil Spring Tube The Effect of Splicing Shape and Interval Length on the Failure Mode of Laminated Composites under Tensile Condition Investigation on the Applicability of Single-Yoke Magnetic Testing under Applied Stress Deformation Characteristics of Ultra-Fine Grained Al6061 Chip in Machining by Finite Element Method Management of Knowledge Base of Expert System for Fault Diagnosis of Rotating Machinery Application of Improved Genetic Algorithm in Maintenance Decision for Turbine-Generator Unit A Review of Piezoelectric Vibration Generator for Energy Harvesting Investigation of the Dilation of Epoxy with Negative Thermal Expansion Fillers Study on Polarization of the Cold-Rolled Steel Strip in the Process of Electrolytic Cleaning Experimentally Investigation of Curing Shrinkage of Extra Low Dilated Epoxy by Fiber Bragg Gratings Thermal Wavelength Stabilization of Fiber Bragg Gratings Using Bi-Metal Structure Experimental Study on Hysteresis Nonlinearity of Piezoelectric Actuator Serial Communication and Temperature Monitoring of MSMA Actuator Based on DS18B20 Quantum Polarization Codes for Capacity-Achieving in Discrete Memoryless Quantum Channel Middle - Long Electric Power Load Forecasting Based on GM(1,1) and Support Vector Machine Complex Maintenance of Aircraft Engine Structural Components Using Genetic Algorithm and Multi-Objective Optimization High Velocity Compaction of 316L Stainless Powder Influence of Sandwich Damping on the Loss Factor of Multi-Plies Bellows The Experiment for the Fracture Toughness of the Compound Bioceramic and the Analysis for the Confidence Level of its Reliability The Thermal Property of Soybean Protein-PVA Fibers Effect of Thermal Annealing in NH3 Ambient on Nanoporous n-GaN and Subsequent Epilayer Preparing and Study on Thermal-Conductive Epoxy Resin Nanocomposites The Determinants of Mass Concentration of Indoor Particulate Matter in a Nursing Home Technology of Pulse Electrochemical Polishing of Stainless Steel The Synthesis of Binuclear Mono-Cyclopentadinyl Titanocene and its Using for Aqueous Homo-Polymerization of Methyl Methacrylate Study on the Chloromethylation of Polyaniline Study on Modification of Phenolic Resin/Glass Fiber Composite by Polyvinyl Alcohol Measurement of Extensional Rheological Properties of HDPE by Melt Spinning Techniques Deformation Analysis of Pavement Structures under Coexistence of Vertical and Horizontal Loads Theoretical Approach in Predicting Perforation of Aluminum Alloy Foam Target against Different Ogive-Nosed Projectile Preparation of Silica-Based Alkaline Slurry and its Application on Chemical Mechanical Polishing of Hard Disk Substrates Polishing Mechanism and Technology of Hard Disk Substrates by Colloidal Silica Alkaline Slurry Entity Finite Element Simulation of Steel-Concrete Composite Cable-Stayed Bridge Application of Grillage Method in Analysis of Ramp Bridges with Box-Girder Experimental and Theoretical Analysis on the Load Capacity of the Membrane Structure FBG Close-Loop Dynamic Demodulation Method and System with Temperature Compensation Experimental Study on Reversibility of Magnetically Controlled Shape Memory Alloy Investigation of Tensile Behavior of Aluminum Foam Used as Sound Insulation Modeling of Steel-Concrete Interface Fracture under Wedge Splitting Based on a Heterogeneous Assumption The Strengthened Mechanism of X70 Pipeline Steel Welded Joints by Laser Shock Processing Use ANN to Solve Function Regression Problem in Manufacturing Chapter 4: Frontiers in Automation and Information Optimization of Wireless Body Area Networks Model in Clonal Selection Quantum Genetic Algorithm Determining Method of Optimization Region of Quadrilateral Meshes Based on Viewpoints The Application of Virtual Samples in Face Recognition Build a "Computer Network Technology" Teaching Model Based on Work Process Project Team Formation Based on Knowledge and Cooperation Degree A Variable Parameters Cross-Coupled Control Based on Differential Evolution Optimization in Crankpin Non-Circular Grinding Medical Image Retrieval by Fuzzy Set Based Geometric Relationships ItemListFCI:An Algorithm for Mining Closed Frequent Itemsets Based on Bit Table Structure Adjustment and Sustainable Growth in Hebei Province with the Bondage of Energy Resources and Environment Wear Particles Image Segmentation Method Based on Multiscale Mathematical Morphology Fast Kalman SLAM Local Adaptive Nonlinear Filter Prediction Model with a Parameter for Chaotic Time Series A New Design of RF Tag Location and Recognition Authenticated Session Key Distribution Protocol with Zero-Knowledge Multi Biometrics Fusion Identity Verification Based on Particle Swarm Optimization GF-NSA: A Negative Selection Algorithm Based on Self Grid File A Mutual Information Based Image Measurement for Large Workpiece Wavelet Vector Machines Blind Equalization Algorithm Based on Variable Segmentation Error Function Blind Equalization Algorithm Based on Adaptive Genetic Algorithm and Wavelet Transform Classifier Fusion Based on Inner-Cluster Class Distribution Research of Aviation Image Multiplication Based on the Fractal Interpolation Algorithm Image Dense Matching Method Based on Wavelet Edge Detection and Region Growing A PSVM and Negative Binomial Model for the Patenting Evolution A Novel Global Optimization Method - Genetic Pattern Search The Algorithm of Moving Objects Detection and Movement Templates Based on OpenCV Research on Key Technologies of LXI Class C Instrument Parallel A/D Successive Data Acquisition Module Driver Design Based on VXI A24/D16 An Adaptive Intrusion Tolerance Model Based on Autonomic Computing Study of Improved Multiple Discipline Feasible Strategy for Complicated System Optimization A B-Tree Based Interval Consistency Control Method in DVE Systems An Infrared Image Segmentation Algorithm Based on Spatial Correlative Information Ajax Technology's Application and Research in Network Teaching Resources Library System The Attribute Selection Method Based on PSO Intelligent Control of Flocculation Process Based on Radial Basis Probabilistic Neural Network for Sewage Treatment DEHCA: Load Balance Clustering Algorithm for Energy Heterogeneous WSN Based on Distance Integrated Solving Strategy for Cloud Computing Maximal Frequent Item Sequences Mining of Datasets with few Attributes and Large Instances An Object-Oriented Class Library for Scanning Path Generation in SLS/SLM Process Research on Laser Cleaning of Ultra Precision Machining Hard-Brittle Workpieces Implementation of P2P Traffic Identification System The Simulation of Resonance Phenomenon of Super-Heavy Vibrating Screen Research of Automatic Extraction of Human Dimensions Based on Hybrid Programming of MATLAB and VB On an Internet Interface in an Embedded POS System for Internet of Things Cooperation Research on Zero-Sum Game FPGA-Based Pulse Compression for Linear Frequency Modulated Signal Fuzzy Biometric Identity-Based Signature in the Standard Model SEMG Analysis Basing on AR Model and Bayes Taxonomy A Network-Centric Architecture for Combat Simulation System Model Dynamic Iterated Algorithm for RNA Pseudoknots Prediction Applying Fuzzy Statistics and Clustering Analysis to Construct a Document Multi-Classification Model Research of the Application of PBL Teaching Mode to Basic Computer Education in Colleges Quadtree Partition Encoding Model Based on Weighted Information A Video Watermark Method Based on Chaotic Encryption Handwritten Character Recognition Research Based on Adaptive Minimum Distance Classifiers Integration Study of Fuzzy Random Reliability Model of Tailings Dam under Earthquake Action Phreatic Line Predicted Method-Based SVM for Stability Analysis of Tailing Dam Forecast Model of Phreatic Surface on Tailings Dam Based on GM-GRNN Theory Comprehensive Evaluation Model-Based Fuzzy Math of Tailings Dam Stability Physical Insight of the Source Data of a Two-Port Acoustic Source Model KF-MA Model for Short-Term Traffic Flow Prediction Based on SCATS Data Optimization Algorithm for Solving a Kind of Mathematical Problems A Traffic Flow Forecasting Model Based on Variable Dimension Fractal Combined with Weekly Similarity Simulation Platform Development for Random Space Vector PWM Automatic Landmark Detecting by Flickr Photo Clustering Automatic Image Tagging via a Generative Probabilistic Model A Pruning Method Based on Conditional Misclassification Grey-Fuzzy Comprehensive Judgment of the Debt Risk of Highway Project A Fault Predication Algorithm Based on Artificial Immune Particle Filter Objective Evaluation of Seam Pucker Using Complex Wavelet and Fractal Dimension of Textural Image The Micro-Interaction Lauguage in Web-Base Collabarative Learning Estimation of Doppler Parameter for Formation-Flying Satellite SAR System Relationship between Kinematics Characteristics and Link Lengths in Crank-Rocker Linkages A Roadbed Earthwork Allocation Model Based on ACO Algorithm Multi-Objective Optimization Algorithm for Instrument Integrated Development Computer Aided Lung Nodule Detection on CT Data Neural-Fuzzy Control for Isolation Platform Based on Hexapod Parallel Mechanism Electro-Hydraulic Proportional Speed Control on Walking-Beam Conveyer Guiding Simulation Model Verification by Model Checking Embedding the Importance of Commercialisation of University's Research in the Engineering Education in Malaysia Data Fusion for MFL Signal Characterization Effects of Apparatus Parameters on MFL Signals Using Orthogonal Experimental Design Surface Defect Detection Using Texture Features and RBFN Real-Time 3D Space Coordinate Acquisition of Medical Visualization Data Inverse Classification Problem of Quantitative Attributes Research on Innovative Talents Training Mode Based on Off-Campus High-End Practice Environment The Static Structural Complexity Metrics for Large-Scale Software System Research on the Control of Thermal System of a Spacecraft Based on Fuzzy Theory Teaching Reform and Study on Hydraulic Engineering Construction Based on CDIO Pattern in Higher Vocational Colleges Channel Selection and Feature Extraction of ECoG-Based Brain-Computer Interface Using Band Power Speed Prediction of ESPCP System Based on Neural Network A Balanced Multiway Search Tree for Multi-Dimension Searching Choquet Integral with Respect to High Order Extensional L- Measure Effect of Sine Bar Manufacturing Accuracy on Angle Measurement A Kind of Automatic Verification Apparatus for Dial Indicator Research on Path Planning of Mine Rescue Robots Based on Fuzzy Control Research on Flame Simulation Based on Improved Particle System and the Texture Mapping Development of a Unified Resource Base for E-Learning A Multi-Step Reinforcement Learning Algorithm The Effect of Zirconium Incorporation on the Bronsted Acidity of Zeolite: A DFT Study Study on the Dynamic Characteristics Analysis and Failure Prognosis of a PWA Data Acquisition and Processing System for Vehicle's Braking Performance Based on Visual C++ Study of Pavement Identification Approach Based on Wavelet Analysis Road Surface Identification Approach Based on Vehicle Dynamic Parameters A Simulation Study on Choquet Integral with Respect to Extensional L- Measure Cutting down the Difficulties of SCM Implementation: A Comparison between Iranian and Malaysian Companies Genetic Algorithm for Assembly Sequences Planning Based on Heuristic Assembly Knowledge Network Security Situation Prediction Using Artificial Immune System and Phase Space Reconstruction Research on License Plate Recognition Technology Order-Variable Multi-Pulses Linear Prediction Speech Coding The Past and Future of Phyllostachysnigra in Putuo Mountains Human Tracking Method Based on Maximally Stable Extremal Regions with Multi-Cameras The Comprehensive Evaluation of Regional Agricultural Brand Competitiveness Based on Fuzzy Gray Analysis An Equilibrium Principle on the AON Network for Single-Machine Scheduling Problem with Time Lags A Novel Efficient Mining Algorithm for Frequent Patterns on Biological Multiple Sequence Control of Testing Device Based on FluidSIM-P A Color Error Correction Mode for Digital Camera Tooth Contact Analysis of the Double Circular Arc Tooth Spiral Bevel Gear Research of Motor Fault Diagnosis by Detecting Dynamic Model Parameters Delaunay Triangulation-Based Hazard Area Avoidance for Spacecraft Safe Landing A RSA-Based Data Integrity Check without Original Data in the Cloud Computing Prediction Analysis of Electromagnetic Interference Based on Gray Prediction Theory Microscopic Phase-Field Simulation of the Order-Disorder Transition of Antiphase Domian Boundary Formed between DO22 Phases A Dynamic Sensory Quality Evaluation Model Based on Panel Data and Linguistic Information Processing A Novel Smooth Support Vector Regression Based on CHKS Function The Application of Agent Technique in E-Commerce An Efficient Hierarchical Clustering Algorithm and its Application for Image Retrieval Condenser Fault Diagnosis Based on FNN and Data Fusion Application of Time Series Analysis in the Analysis and Forecasting of Track Geometry Status Study on Data Management of High-Speed Railway Transport Equipment Based on Metadata Calculating Urban Storm Intensity Formula Using Genetic Algorithm Attitude Estimation with Complementary Filter An Improved "Data Mules" Scheme Based on Controlled Working Area and Designed Trajectory Detection Method of Gradual Fault Signal Based on Wavelet Transform in the Dynamic System A Prediction Method of Power Energy Saving Potential Based on Rough Set Neural Network Data Driven Multivariate Adaptive Regression Splines Based Simulation Optimization LabVIEW over BACnet, a New Approach for Electromechanical Equipment Remote Monitoring System Optimal Parameters and Characteristics of Shunted Piezoelectric System with Negative Capacitance in Series Research on Contact Deformation Experiments in Stiffness Measurement of Spring Tubes Generation Method for Specification Surface Model of Flatness Analysis of Bridge-Type Nano-Positioning Stage Analysis the Interface of Amplifier in GPON System by PSpice Research of Nonlinear PID Control Method for Time Delay Systems Importance-Performance Analysis Based on Choquet Integral with Respect to L-Measure Implementation of the Object-Oriented Data Model in Oracle Database Image Segmentation Method for Wheel Set Online Measurement High-Speed Acquisition and Processing Method for High Resolution Image of Wheel Set An Array Nonlinear Kalman Tracker for Indoor GPS Signal CMM Inspect Path Planning for Precision Concave Revolved Surfaces Kinematic Chain Isomorphism Identification Based on Loop-Code Rotor Speed Identification of PMSM on DTC System Based on PSO and CMAC Neural Network Algorithms Crack Pattern and Ductility of Connections Composed of CSSEUHSC Columns and RC Beams Subjected to Reversal Cycle Loads Some Similarity Measures of Interval-Valued Intuitionistic Fuzzy Sets and Application to Pattern Recognition Prediction for Relative Dynamic Elastic Modulus of PVA-ECC under Freezing and Thawing Cycles Identifying the Mastery Concepts in Linear Algebra by Using FCM-CM Algorithm Adaboost Classification-Based Object Tracking Method for Sequence Images Finite Element Analysis of Ballastless Track Rail-Floating Slab's Dynamic Characteristics WSN Image Watermarking Algorithm Based on Multi-Wavelet Active Subdivision Snake Scheme Analyzing the Test of Problem Solving Abilities by Using GM(0,N) Study on Bi-Level Programming Model for Traffic Control on Massive Activities Research on Improved Multidimensional Scaling Localization Algorithm for Wireless Sensor Network An Improved Particle Swarm Optimization Algorithm Applied to the Unified Evaluation of Circularity Error A New Algorithm of Discretization of Consecutive Attributes Based on Decisions in Rough Sets The Research of Extracting Minimal Decision Rules from the Decision Table in Rough Sets A Novel Segmentation Algorithm for Complex Images Based on Valid Gradient Study on Regional Traffic Control Optimization Based on State Analysis Computation Model of Case Similarity Based on Uneven Weight Distance Coefficient The Research of PWM Controlling Capacitance SVC Based on RB-IGBT Automatic Fuzzy Based System for Carbon Estimation in a Basic Oxygen Furnace Reading and Controlling on UG Files by OpenGL Based on Object-Oriented Methods A Continuous Control for Stabilizing the Extended Nonholonomic Double Integrator: Theory and Simulation Results Motion Planning of Nonholonomic Systems with Tracking Control Lyapunov Function Barriers of SCM in SMEs Research on Flatness Error Measurement of Revolving Body End-Face Hypothetical Analysis on Basis of View A Novel Public Encryption and Key Agreement Based on Permutation Rational Function MCU-Based Detection and Control System Design of a Kernel Hardness Tester Particle Swarm Optimization for Scattering Coefficients in One-Dimensional Non-Uniform Media Research and Improvement of DV-Hop Localization Algorithm for Wireless Sensor Network Optimization of Highway Construction Based on Prim Algorithm Automatic Keyword Extraction Algorithm and Implementation Education of Master of Engineering via Constructivist Perspective Study of Control Algorithm for Indirect Stabilized Optical Seeker A Novel Cyber Physical Systems Model Review on Research and Progress of Corrosion Inhibitors Fuzzy Clustering Algorithm Based on Improved Particle Swarm Optimization and its Application A Low Power Monitoring and Tracking System for Multi-Container Based on the Improved LEACH On the Evaluation Method of Wavelet Analysis for Surface Roughness The Think Aloud Experiment of the Designing Process of an Expert Testing Study on Wear Mechanism of Fluororubber by 45# Steel under Different Speed in Oil Medium The Intelligent Controller Design of Parallel Online Mixing and Supplying Glue System Research of Real-Time Monitoring Technology for Progressing Cavity Pumping Operation Vibro-Acoustic Coupling Analysis of Aero-Engine Combustion Chamber Model Product Lifecycle Oriented Quality Management System for Individualized Customization Process Quality Control Method for Individualized Customization Based-Customer Satisfaction Adjustable Respiratory Mechanical Parameters Lung System for Medical Patient Simulator A Simple Method for Solving the Vehicle Power Demand Rheological Investigation of ZK60 Magnesium Alloy Feedstock for Metal Injection Moulding Using Palm Stearin Based Binder System Composing Multi-Resource Systems by Category Theory Improving Production Line Performance: A Case Study Product and Vendor Development Programme in Encouraging Supply Chain Management: A Case Study Fuzzy Neural Network Blind Equalization Algorithm Based on Signal Transformation Solid-Phase Crystallization of a-Si:H by RTA Quantum State in Solid-Phase Crystallization of a-Si:H by FA Temper and Wear Resistance of Wide-Band Laser Cladded WC Coating Multi-Scale Edge Extraction Based Stereo Matching Algorithm Parameters Influences during Biodiesel Production Optimal Design and Simulation of Active Vibration Isolation Platform Based on Fuzzy Control Effect of Particle Size on Structure and Dielectric Properties of 0-3 PMN/EP Composite Three-Dimension Reconstruction of Pit Corrosion Damage Morphology and Digital Simulation Multi-Objective Optimization of Fine-Pitch Gear Based on Variable-Grain Strategy

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB05229655
• ISBN:
  • 9783037850046
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zurich
• ページ数/冊数: 4 v. (xx, 4238 p.)
• 大きさ: 25 cm
• 分類:
  • DC22 : 620.0042
• 件名:
  • LCSH : Manufactures -- Congresses
  • LCSH : Design and technology -- Congresses
  • LCSH : Industrial engineering -- Congresses
  • FREE : ICFMD
• 親書誌ID:
  • BA88918107