Nanomaterials by severe plastic deformation : NanoSPD5 : selected peer-reviewed papers from the 5th International Conference on Nanomaterials by Severe Plastic Deformation held in Nanjing, China on March 21-25, 2011

著者

• International Conference on Nanomaterials by Severe Plastic Deformation
• Wang, Jing Tao
• Figueiredo, Roberto B.
• Langdon, T. G.

書誌事項

Nanomaterials by severe plastic deformation : NanoSPD5 : selected peer-reviewed papers from the 5th International Conference on Nanomaterials by Severe Plastic Deformation held in Nanjing, China on March 21-25, 2011

edited by Jing Tao Wang, Roberto B. Figueiredo, Terence G. Langdon

（Materials science forum, v. 667-669）

Trans Tech, c2011

• pt. 1 : pbk
• pt. 2 : pbk

注記

Includes bibliographical references and index

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The 200 peer-reviewed articles in this "Nanomaterials by Severe Plastic Deformation" special collection are a convincing demonstration of the relevance of bulk ultrafine grained and nanostructured materials, produced by severe plastic deformation, to a wide range of researchers and engineers., The total number of articles in this edition, larger than that in the 2008 edition, shows that this community is, in fact, growing. The coverage includes all aspects of NanoSPD: Principles of SPD Processing, Microstructural Evolution and Grain Refinement, Mechanical Properties of SPD Materials, Functional and other Properties of SPD Materials, Innovation and Applications.

目次

Sponsors and Organizers, Committees, Preface and the NanoSPD Award I. Introduction Major Landmarks of NanoSPD Activity: International Conferences from NanoSPD1 to NanoSPD5 Processing by Severe Plastic Deformation: Historical Developments and Current Impact II. Principles of SPD Processing Nanostructure Formation and Amorphization in Intermetallic Compounds by Severe Plastic Deformation Severe Plastic Deformation Processes with Friction Induced Shear Twist Extrusion: Fundamentals and Applications Equal-Channel Angular Pressing of NiAl Strain Compatibility and Nanostructuring of Bulk Metallic Materials via Severe Plastic Deformation High-Pressure Torsion for Ring Samples in Different Thicknesses Comparison of Different Extrusion Methods for Compaction of Powders Nanostructured Dual Phase Ti-Al through Consolidation of Particles by Severe Plastic Deformation Effect of a Special ECAP Die Configuration on Microhardness Distributions in Pure Aluminum Finite Element Simulation of Die Design for Warm Equal Channel Angular Extrusion Process of AZ31 Alloy and its Experimental Investigation Finite Element Simulation of Effects of Mould Angle and Friction on ECAP for AZ80 Magnesium Alloy Nano-Refinement, Nano-Consolidation: Different Fabrication Routes of Nano-Crystalline Aluminium Alloys Application of High-Pressure Sliding for Grain Refinement of Al and Mg Alloys Simple Shear: Double-Stage Deformation Severe Plastic Deformation by Equal Channel Angular Swaging Study on the Fabrication of Nanocrystalline Copper by Explosive Dynamic Loading Simulation of Multi-Pass ECAP by 3D Finite Element Method Current Practice and Future Opportunities for Two-Turn ECAP The Novel Continuous Large Deformation Technology Integrating Conventional Rolling with Equal-Channel Angular Technology Influence of ECAR Processing on OFHC Cu Material Properties Experimental Studies and Modelling Analysis of Commercial Purity Iron Processed by Asymmetric Rolling Ag Powders Consolidated by Reciprocating Extrusion (CEC) Nanocrystallization and Dissolution of Immiscible Powder Alloys Using High Pressure Torsion Effect of Severe Cold-Rolling and Subsequent Annealing on Microstructure and Properties of in-Situ Composite Steel Effect of Combined Rolling Processes on Structure and Mechanical Properties of Pure Titanium Rods III. Microstructural Evolution and Grain Refinement Atomic Scale Investigation of Impurity 3D Distribution in Nanocrystalline Ni Processed by SPD Microstructure Evolution and Tensile Properties of 304L Stainless Steel Subjected to Surface Mechanical Attrition Treatment Grain Size Effect on Deformation Twinning and De-Twinning in a Nanocrystalline Ni-Fe Alloy X-Ray Analysis of and - Phases of Ti, Subjected to High-Pressure Torsion Microstructure and Properties of T2 Copper Tube Produced by Severe Hot Rolling Obtaining a Homogeneous Fe-C Nanostructure from a Ferritic-Pearlitic Dual-Phase Steel by High Pressure Torsion Disorientations after Severe Plastic Deformation and their Effect on Work-Hardening Annealing Behavior of Solution Treated and Aged Al-0.2wt% Sc Deformed by ARB Microstructure and Mechanical Properties of Accumulative Roll Bonded AA6014/AA5754 Aluminium Laminates Microstructural Evolution in an Al-6061 Alloy Processed by High-Pressure Torsion and Rapid Annealing Microstructure and Properties of a Fe-Cu Composite Processed by HPT Powder Consolidation Quantitative Characterization of Microstructure in Copper Processed by Equal-Channel Angular Pressing Influence of the Precipitation State on Thermal Stability of an Ultra-Fine Grained AlMnFe-Alloy Produced by Equal Channel Angular Pressing Structural Evolution on the Cross-Section of an AZ31 Magnesium Alloy Processed by High-Pressure Torsion Investigations on Microstructure Evolution and Deformation Behavior of Aged and Ultrafine Grained Al-Zn-Mg Alloy Subjected to Severe Plastic Deformation Aging Behavior of Al-Mg-Si Alloys Processed by High-Pressure Torsion Grain Boundary Segregation of Carbon and Formation of Nanocrystalline Iron-Carbon Alloys by Ball Milling Texture Evolution in Pure Copper Processed by Equal Channel Angular Extrusion with Extended Processing Routes The Evolution of Homogeneity during Processing of Aluminium Alloys by HPT On the Theoretical Limits of Microstructure Evolution in Severe Plastic Deformation Effect of Multiaxial Forging on Structure Evolution and Mechanical Properties of Oxygen Free Copper Effect of Cold Rolling on Structure and Mechanical Properties of Copper Subjected to Different Numbers of Passes of ECAP Structure and Properties of Ultrafine-Grained Cu-Cr Alloys after High Pressure Torsion Aging Behavior of Cu-Ni-Si Alloy Processed by High-Pressure Torsion Annealing Behavior of FeNi Alloy Processed by High-Pressure Torsion Microstructure Evolution of Pure Nickel up to a High Strain Level during Equal-Channel Angular Pressing The Evolution of Structure and Mechanical Properties of Fe-Mn-V-Ti-0,1C Low-Carbon Steel Subjected to Severe Plastic Deformation and Subsequent Annealing Enhanced Thermal Stability and Mechanical Properties of Ultrafine-Grained Aluminum Alloy Microstructures and Mechanical Properties of Pure Titanium by Dynamic Plastic Deformation A Study on Characteristics of Microstructures and Orientations of UFG Materials Prepared by SPD Recrystallization Mechanisms Leading to the Formation of Nanoscale Grains in a Ni-20%Cr Alloy Subjected to Intense Plastic Deformation Microstructure and Texture of Magnesium Single Crystals Processed by ECAP Martensitic Transformation from Ultrafine Grained Austenite Fabricated by ARB in Fe-24Ni-0.3C Numerical Simulation and Experimental Investigation of Grain Refinement Behavior in Equal Channel Angular Pressing/Extrusion Process Grain Subdivision of a Nb Polycrystal Deformed by Successive Compression Tests Influence of Stacking Fault Energy on the Microstructures and Grain Refinement in the Cu-Al Alloys during Equal-Channel Angular Pressing The Influence of Texture and Grain Size on Compressive Deformation Behavior of Pure Mg through Equal-Channel Angular Processing Microstructural Evolution of Mg-4Nd Alloy Processed by High-Pressure Torsion Developing the Technique of Severe Plastic Deformation Processing through High-Pressure Torsion High-Temperature Severe Plastic Deformation of Ferritic Steel by Torsion The Structure of Nb Obtained by Severe Plastic Deformation and its Thermal Stability Microstructural Evolution of Ultrafine-Grained Steel during Tandem Rolling Process Microstructures and Tensile Properties of Maraging Steel Processed by Equal-Channel Angular Pressing Stabilization of Lattice Defects in HPT-Deformed Palladium Hydride Microstructure and Properties of Nanostructured Zirconium Processed by High Pressure Torsion Mechanisms of Microstructure Refinement in Titanium during "abc" Deformation at 400 DegreesC Texture Manipulation in Commercial Purity Aluminum by Deformation Path Change from ECAP to Plane Strain Compression TEM and DSC Investigation of the Recovery of a Recycled Aluminum Processed by Equal Channel Angular Extrusion Microstructure and Mechanical Performance of AZ31-1.7 Wt.% Si Alloy Processed by Cyclic Channel Die Compression Enhancing the Efficiency of ECAP Processing in Particle Redistribution by Combination of Different Processing Routes Decomposition of Nanostructured Martensite in Cu-Al Alloys Processed by High-Pressure Torsion Microstructure and Toughness of an AZ80 Mg Alloy Processed by ECAP and Ageing Treatment The Mechanical Performance of ARB Fabricated Hybrid Lamellar Composite of Recovered/Recrystallized Al and Precipitation Hardened Al(Sc) Layers Development of Ultra-Fine Grained Structure in an Al-5.4%Mg-0.5%Mn Alloy Processed by ECAP Microstructure Evolution in a Cu-Ag Alloy during Large Strain Deformation and Annealing Grain Refinement and Hardening Induced by Heavy Deformation Using Low Energy High Current Pulsed Electron Beam Surface Treatment Synergetic Effect of ECAP and Friction Stir Welding on Microstructure and Mechanical Properties of Aluminium Sheets Mechanism Responsible for Dynamic Recrystallization for Repeated Plastic Working Deformation Process Dispersion of the Structure in Al-Based Alloys by Different Methods of Severe Plastic Deformation Processing and Characterization of Pure Nickel Sheets by Constrained Groove Pressing (CGP) Technique Microstructure of Pure Ni Subjected to High Pressure Torsion Effect of ECAP on the Dimensional and Morphological Characteristics of High Performance Aluminium PM Alloy Microstructure and Properties of Cu-5.7%Cr In Situ Fibrous Composite Produced by Equal-Channel Angular Pressing and Cold Rolling Microstructure and Mechanical Properties of Ultra-Fine Grain AZ80 Alloy Processed by Back Pressure Equal Channel Angular Pressing Nanostructure Evolution in an Austenitic Stainless Steel Subjected to Multiple Forging at Ambient Temperature Mechanical Properties and Microstructures of Severely Plastic Deformed Pure Titanium by Mechanical Milling and Spark Plasma Sintering The Formation of Submicrometer Scale Grains in a Super304H Steel during Multiple Compressions at 700 DegreesC Processing of Ultrafine Grained Cu-30%Zn Alloy through Severe Plastic Deformation Using Accumulative Roll Bonding The Evolution of Texture in AA 1050 Alloy Deformed by Equal-Channel Angular Pressing Production of Bulk Ultrafine Grained Steel through Severe Plastic Deformation Anomalous Property Evolution during Annealing in HPTed SUS 304 Austenitic Stainless Steel Grain Refinement and Dispersion Precipitation of I-Phase in Mg-Zn-Y Alloy Processed by ECAP Effect of Severe Plastic Deformation on Microstructure and Properties of Al-Cu-Mg-Ag Aluminum Alloys Effect of Ultrasonic Treatment on the Microstructure and Properties of Nanostructured Nickel Processed by High Pressure Torsion Effect of Asymmetrical Accumulative Roll-Bonding and Heat Treatment on the Formation of Ultra-Fine Twin Copper Mechanism of Grain Refinement Induced by Severe Plastic Deformation Grain Refinement in AZ61 Mg Alloy during Hot Cyclic Bending Evidence of Bulk Nanostructuring in Zr-Based Alloys under Deformation at Temperatures of Phase Transformations Nano-Crystalline Structure in Mg2Si/Mg-2.5Er-5Zn Composite on the Route of Repeated Plastic Working Process Research on Temperature Change and Microstructure Evolution of Bore in Steel Target Penetrated by Copper Jets IV. Mechanical Properties of SPD Materials Cooperative Grain Boundary Sliding and Shear Banding at High Strains in Ultrafine Grained and Nanocrystalline Pd Alloys Effect of Hydrostatic Pressure on the Microstructure and Mechanical Properties during and after High Pressure Torsion SPD-Induced Grain Boundary Segregations and Superior Strength in UFG Al Alloys An Overview on the Fracture Behavior of Metals Processed by High Pressure Torsion The Effect of Grain Boundary Sliding and Strain Rate Sensitivity on the Ductility of Ultrafine-Grained Materials Correlation of Physical Parameters with Steady-State Hardness of Pure Metals Processed by High-Pressure Torsion Mechanical Properties of Al-6061 and an Al-6061 Metal Matrix Composite Processed by High-Pressure Torsion Mechanical Characteristics of Zn-22% Al and Al-3% Mg Alloys Processed to High Strains by ECAP Strengthening and Toughening Effect on Tungsten Subjected to Multiple ECAP Strain Rate Sensitivity of Ultrafine-Grained CP-Ti Processed by ECAP at Room Temperature Mechanical Properties of Different Coppers Processed by Equal Channel Angular Pressing Contribution of Twins to the Strengthening of Commercial Purity Titanium after Equal-Channel Angular Pressing Influence of Nanoparticle Reinforcement on the Mechanical Properties of Ultrafine-Grained Aluminium Produced by ARB Influence of Severe Plastic Deformation and Ageing on the Microstructure and Mechanical Properties of -Alloy Ti-6.8Mo-4.5Fe-1.5Al Strengthening of CP-Ti by Rolling at Room Temperature Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions Mechanisms of Deformation Behavior of Coarse-Grained and Ultrafine-Grained Ti High Strength and Electrical Conductivity of UFG Copper Alloys Evolution of Adiabatic Shear Band in Ultra-Fine-Grained Iron under Dynamic Shear Loading Microstructure and Mechanical Properties of Mg-3Y Binary Alloy Processed by Cyclic Extrusion and Compression Using Atomic Force Microscopy to Examine Flow Processes in Materials Processed by ECAP CP-Ti Processed for Multiple Passes by ECAP at Room Temperature Influence of the SPD Processing Features on the Nanostructure and Properties of a Pure Niobium Investigation on Three-Dimensional Microstructures and Tensile Properties of Pure Iron during Equal-Channel Angular Pressing Effect of Impurities on the Microstructure of HPT Deformed Nickel Optimization of Tensile Strength and Ductility of Grade 2 Ti, Conditioned by Severe Plastic Deformation Influence of Strain Reversals during High Pressure Torsion Process on Strengthening in Al-Cu-Mg(-Li) Alloy Mechanical Properties of an Al-5.4%Mg-0.5%Mn-0.1%Zr Alloy Subjected to ECAP and Rolling Microstructure Stability and Creep Behaviour of a Cu-0.2wt.%Zr Alloy Processed by Equal-Channel Angular Pressing Temperature Effects on the Mechanical Behavior of Ultrafine-Grained Material Static and Cyclic Deformation of Commercially Pure Al Processed by Equal-Channel Angular Pressing Using Two Routes Enhancing Strength and Maintaining Ductility of Mg-3%Li-1%Sc Alloy by Equal Channel Angular Pressing Comparison of High-Temperature Compressive Deformation Characteristics of Differently Processed LY12 Aluminum Alloys Distribution of Mechanical Properties by Volume in Titanium Billets Processed by Twist Extrusion Mechanical Spectroscopy of Ultrafine Grained Copper Ultrafine-Grained Steel Produced by Warm Rolling and Annealing of Lath Martensite Flow Behaviour of Commercial Purity Titanium Subjected to Equal Channel Angular Pressing Near-Threshold Fatigue Crack Propagation in an ECAP-Processed Ultrafine-Grained Aluminium Alloy Effect of ECAP on the Microstructure and Mechanical Properties of 17-4PH Stainless Steel Precipitation Effect on Work Hardening Behavior of ECAP-Deformed Al-4%Cu Alloy The Dynamic Behavior of Ultra-Fine-Grained Copper Fabricated by Equal Channel Angular Pressing Effect of Equal-Channel Angular Pressing on the Creep Resistance of Precipitation-Strengthened Alloys Ultrafine Structure Formation in Aluminium Alloy Processed by HPT and the Mechanical Properties Response Production a High-Strength and High-Conductivity Copper Wire by Using Equal-Channel Angular Hydroextrusion Method Structure Evolution and Deformation Mechanisms in Ultrafine-Grained Aluminum under Tension at Room Temperature Microstructure and Strength of Welded Joints of Steel after Equal-Channel Angular Pressing Structure and Hardness of Cryorolled and Heat-Treated 2xxx Aluminum Alloy Effect of ECAP on Mechanical Properties of an AA2014 Alloy Optimization of Strength and Ductility in Ultra-Fine 304 Stainless Steel after Equal-Channel Angular Processing Influence of Annealing on the Structure and Mechanical Properties of Ultrafine-Grained Alloy Ti-6Al-7Nb, Processed by Severe Plastic Deformation Effect of ECAP on Microstructure and Mechanical Properties of an Al-Mg-Sc Alloy Transient Yielding during Compression Tests on ECAP'ed AA1050 Aluminium Prediction of the Tension/Compression Asymmetry of ECAP Processed FCC Material Using an Integrated Model Based on Dislocation and Back-Stress Effect of ECAP on Mechanical Properties of an Al-Cu-Mg-Ag-Sc Alloy Mechanical Properties and Microstructure of a Duplex Nanostructure Hot Workability of Ultrafine-Grained Aluminum Alloy Produced by Severe Plastic Deformation of Al6063 Powder and Consolidation Influence of Thermal Cycling on Dilatation and Electrical Resistance of Ti - 49.8 at. %Ni Alloy after Hot Rolling On Gradient Nanomechanics: Plastic Flow in Nanopolycrystals Characterization of AM60 Magnesium Alloy Prepared by Rapid Solidification and Plastic Consolidation Technique Influence of Stacking Fault Energy on the Mechanical Properties and Work Hardening Behavior of Ultra-Fine (UF) Grained Cu and Cu Alloys Effect of Post Annealing Treatment on Nano-Structured Low Carbon Steel Sheets Processed by Constrained Groove Pressing Enhanced Plasticity of Cu-Based Laminated Composites Produced by Cold Roll-Bonding Influence of Dissolved Precipitated Phases on Mechanical Properties of Severely Deformed Al-4 Wt% Cu Alloys Fatigue Properties of Rapidly Solidified Mg-6Zn-1Y-0.6Ce-0.6Zr Alloy Processed by Reciprocating Extrusion Microstructure and Mechanical Properties of an AZ31 Magnesium Alloy Processed by Accumulative Back Extrusion (ABE) Superplastic Flow of Metals Extruded by KoBo Method V. Functional and other Properties of SPD Materials Hydrogen Activation Behavior of Commercial Magnesium Processed by Different Severe Plastic Deformation Routes Hydrogen Sorption Properties of the Complex Hydride Mg2FeH6 Consolidated by HPT Phase Transformations and Functional Properties of NiTi Alloy with Ultrafine-Grained Structure Hysteresis Magnetic Properties of Nd-Ho-Fe-Co-B Alloys after Intense Plastic Deformation Effect of Equal-Channel Angular Pressing on the Microstructure and Superelastic Behavior of Ti-25 at. % Nb Shape Memory Alloy Effect of the High Pressure Torsion on Magnetic Properties of Amorphous Alloys Electrochemical Properties of UFG CP-Ti in Ringer's Solution Impact of Ball Milling and High-Pressure Torsion on the Microstructure and Thermoelectric Properties of p- and n-Type Sb-Based Skutterudites Wear Resistance of SPD-Processed Alloys Wear Behaviour of Al-1050 Alloy Processed by Severe Plastic Deformation Sliding Wear Behavior of Severely Deformed 6061 Aluminum Alloy by Accumulative Roll Bonding (ARB) Process In Vitro Corrosion and Haemocompatibility of Bulk Nanocrystalline 304 Stainless Steel by Severe Rolling The Effect of Structure on Mechanical and Corrosion Properties of Austenitic Steel Subjected to Neutron Irradiation Investigation on Corrosion Behaviors of Ultra-Fine Grain Copper in 3.5% NaCl Solution Overview on the Corrosion Behavior of Ultra-Fine Grained Materials Fabricated by Equal-Channel Angular Pressing Phase Transformations and Super-Elasticity of a Ni-Rich TiNi Alloy with Ultrafine-Grained Structure VI. Innovation and Applications Status of Commercialization of Nanostructured Metals Microstructural Features and Mechanical Properties after Industrial Scale ECAP of an Al 6060 Alloy Development of SPD Technologies and Establishment of a Production Line for Rod-Shaped Semiproducts out of Nanostructured Titanium for Medical Application Evolution of Microstructure and Mechanical Properties of Titanium Grade 4 with the Increase of the ECAP-Conform Passes Interface Microstructure of Diffusion Bonded Fe3Al/Al with Ultrafine Grain Layer Recycling of Aluminum Scrap by Severe Plastic Deformation The Aspects of Practical Application of Ultrafine-Grained Titanium Alloys Produced by Severe Plastic Deformation Development of Textured Coated Superconductor Substrate Tapes by Severe Plastic Deformation Processing Microstructure Evolution and the Influence of Hydrofluoric Acid Treatment on the Surfaces of Commercial Pure Ti after ECAE Towards Perspective Applications of Nanostructured Ti in Medicine Annealing Effect on the Performance of Sputtering Deposited Metglas Thin Films

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB05706710
• ISBN:
  • 9783037850077
  • 9783037850077
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Stafa-Zuerich
• ページ数/冊数: 2 v. (xx, 1224 p.)
• 大きさ: 25 cm
• 分類:
  • DC22 : 620.5
• 件名:
  • LCSH : Nanostructured materials -- Plastic properties -- Congresses
  • LCSH : Nanotechnology -- Congresses
  • LCSH : Deformations (Mechanics) -- Congresses
• 親書誌ID:
  • BA00294222