High speed machining : selected, peer reviewed papers from the 4th International Conference on High Speed Machining (ICHSM 2010), October 9-10, 2010, Guangzhou, China
著者
書誌事項
High speed machining : selected, peer reviewed papers from the 4th International Conference on High Speed Machining (ICHSM 2010), October 9-10, 2010, Guangzhou, China
（Advanced materials research, v. 188）
Trans Tech Publications, c2011
- : pbk.
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This special collection brings together the latest research results and technological advances concerning high-speed machining. It covers a wide range of topics in high-speed machining and high-performance machining-related fields ranging from the mechanisms of machining, modeling and simulation of machining process, machine tools, cutting tools, CAD/CAM, optimization, cooling and lubrication, testing, measuring, monitoring, controlling and industrial applications. The work will be of great interest to those working in the fields of processing, cutting-tool use, machine-tool use and CAD/CAE/CAM.
目次
Sponsors, Committees and Preface
Mechanism
Experimental Study and Modeling of Milling Force during High-Speed Milling of SiCp/Al Composites Using Regression Analysis
The Analysis of Saw-Tooth Chip Formation in High Speed Machining through Material Micro-Hardness Measurement
Study on the Cutting Force of Inconel 718 Machined by Different Cutting Tools
Research on Thermodynamic Characteristics in High-Speed Machining System
Analysis on the Microstructure of Carbide Reamers after the Cryogenic Treatment
Progressive Tool Failure in High Speed End Milling of Inconel 718 with Coated Carbide Inserts
Research on Wear Property of Tool Flank by Dry Cutting of Austempering Ductile Iron
Combining Multiaxis Machining and Burnishing in Complex Parts
Friction and Wear Properties of WC-Co Cemented Carbide Sliding against Ti6Al4V Alloy in Nitrogen Gas
Cutting Force, Cutting Temperature and Tool Wear in End Milling of Powder Metallurgy Nickel-Based Superalloy FGH95
Effect of Flow Field on Cutting Fluid Penetration during Minimum Quantity Lubrication (MQL) Machining
Determining Structural Modes of HSK Tool System and Influential Factors
Incidence Analysis on Characteristic of High Speed Ball-End Milling Hardened Steel
An Experimental Study on Rough Ball-End Milling of T10A Steel
The Mechanical Behavior of Carbon Steel in the Super High-Speed Cutting State
An Experimental Study on Grinding of SiC/Al Composites
Experimental Study on the Staining Method for Measuring Acoustic Field for Ultrasonic Process
Experimental Study on the Dynamic Characteristics of High Speed Milling on Inclined Planes
Module Partition and Application for Printed Circuit Board High Speed Drilling Machine
Experimental Study and Theory Prediction on Adiabatic Shear Critical Conditions of Fe-36Ni Invar Alloy
Critical Thickness and Dynamic Stiffness for Chatter Avoidance in Thin Floors Milling
Cutting Performances of Diamond Coated Milling Tools in Machining Aluminum Alloy
Prediction of High Speed Machining Cutting Forces Using a Variable Flow Stress Machining Theory
Temperatures in High Speed Grinding of TC4 with a Vitrified CBN Wheel
Research on Cutting Performances of Tool Rounded Cutting Edge in High Speed Milling Hardened Steel
Cluster Analysis on Vibration Characteristic in High Speed Ball-End Milling Hardened Steel
Research of Cutter Geometric Parameter Effect on Machining Stability Area in High Speed Milling Process
Study of Exit Burr Formation of CFRP
Method of Recognizing of Chip Shape Based on Machine Vision Technology
The Identification of Vibration Characteristics for Hardened Steel Based on Wavelet Energy Spectrum in High-Speed Milling
Cutting Force Model Prediction Considering Cutting Edge Parameters Base on Genetic Algorithm
Temperature Variables Selection for Thermal Error Modeling of Heavy-Duty CNC Milling-Boring Machine Tools
A Viscometer Based on Velocity Attenuation of Rotary Cylinder
The Study on Three-Dimensional Roughness of Machined Surface in High Speed Milling of SiCp/Al Composites
Analysis of the Nanoscale Manipulation Using Near-Field Optical Tweezers Combined with AFM Probe
Analysis on the Coupling Error of Laser and Water-Jet in Water-Jet Guided Laser Micromachining
Experimental Study of Titanium Alloy Micro-Holes by EDM Fuzzy Control System
Analysis of Elastic Deformation of Axial Foil Hydrodynamic Thrust Bearing Used in Turbine Generator
Experimental Study on the Surface Roughness with Mill-Grinding SiC Particle Reinforced Aluminum Matrix Composites
A Steel Plate Correction Method of NC Flame Cutting Based on Edge Detection
Research on Compound Servo Drive Control of Heavy Loading Feed Table
Study on Residual Stress for High-Speed Cutting Titanium Alloy Based on Finite Element Method
FEM Prediction of Chip Morphology during the Machining of Particulates Reinforced Al Matrix Composites
Research on Dynamic Constitutive Relation of Materials Taking Account of Damage Evolution and Fracture Law for High Speed Cutting
Analytical Method for Softness Abrasive Flow Field Based on Low Reynolds K- Model
Software System Development of Measurement and Control System for a Nonlinear Absorber by Virtual Instrument
Control Algorithm Study for some Optical Tracking Measurement System with Low Mechanical Resonance Frequency
The Experimental Research about the Influence of High Moisture Extrusion on Texture of Product
The Experimental Study about the Influence of Extrusion System Parameters on Textured Degree of High Moisture Content Fibriform Imitated Meat
Comparative Study on 2A70 Aluminum Alloy High-Speed Milling Cutting Force Model
Comparison of Multi-Frequency Phase Unwrapping Algorithm for Shape Measurement Using Digital Fringe Projection
Stability Research on High Speed Milling of Aviation Aluminum Alloy
Research on Dynamic Characteristics of High-Speed Machining Aluminum Alloy Blades
Fuzzy Comprehensive Evaluation of Aluminum Alloy 7475 High-Speed Milling Parameter Optimization
Research on Instantaneous Cutting Force of High Speed Ball-End Milling Cutter
Remote Control of Servo Motor Based on ZigBee Module and PLC
Research on Effects of Cutting Vibration on Surface Appearance
Processing
Cutting Force and Processing Parameters Optimization of Plunge Milling for Die Steel
Parameters Optimization of Turning Free Cutting Steel Based on the Coupling Method of Response Surfaces
Optimization of Cutting Parameters for Desirable Surface Roughness in End-Milling Hardened AISI H13 Steel under a Certain Metal Removal Rate
Deformation Control and Chatter Suppression in 5-Axis Milling of Thin-Walled Blade
Experimental Research on Dry Cutting 34CrNiMo6
Tool Wear Prediction when Maching Ti6Al4V Using Different Tool Materials
Research on the Topography Features of the Densely Bonded Diamond Grinding Wheel Dressed by Elliptical Ultrasonic Vibration
Parametric Design of Face Milling Cutter Based on UG Template Model
The Optimization on Case-Based Reasoning to Processing Piece Large Cylinders of Heavy Cutting Process
Tool with Heavy-Duty Machining Tube Section of the Fatigue Analysis
Ball-End Milling Force Modeling and Simulation Based on Cutting Path Optimization Experiments
The Simulation of Cutting Force during High-Speed Milling of Die Steel Cr12MoV
Calculation of Indentation Hardness Based on Indentation Energy
Modeling of Thrust Force and Tool Wear and Optimization of Process Parameters in Drilling Nickel-Based Alloy GH536
Influence of the Sharpening Methods for Drill Flank Surfaces on the Compressive Strength of PCD Inserts
Finite Element Method Modeling Approaches in Grinding
Finite Element Method Simulation of Drilling Process on Metal-Matrix Composites
Research on Fabrication Technology and Hydraulic Performance of Multi-Point Gear Flow Dividers
Simulation of Residual Stress in Ultrasonic Vibration Assisted Micro-Milling
Cutting Tool
Fabrication and Cutting Performance of Ultrafine Grain Composite Diamond Coated Drills
High Speed Machining of Particulate Reinforced Metal Matrix Composites with PCD Tools
Aeroacoustic Performance Evaluation of Milling Cutters Based on the Flow Field on the Cutter Surface
Cutting Force Prediction for Generalized Cornering Milling Process
Experimental Investigation on Tool Wear when End-Milling Inconel 718 with Coated Carbide Inserts
Rapid Selection of Milling Tools Based on the Initial Wear
Research on New Helical-Conical Grinding Method for PCB Drill
Drilling Force and Chip Morphology in Drilling of PCB Supported Hole
Cutting Forces of PCB Supported Hole
A Review on Drilling Printed Circuit Boards
Research on the Application and Design of Special Tools of the Hydrogenated Cylindrical Shell
Machine Tool
The Performance of the Hydraulic Expansion Toolholder in High-Speed Rotation
Dynamic Analysis of Helical Milling Unit Based on Virtual Machine Tool
Tools Optimization in Efficient Intermittent Cutting of 2.25Cr1Mo0.25V Steel
A Wireless System for Cutting Temperature Measurement
Design and Strength Analysis of Ultra-High Speed Permanent Magnet DC Rotor
Research on MFBD Modeling Method for a Gantry Machining Center Beam Components
Research on Kinematics of High Speed Linear Feed System
The Study of Control System for Reconfigurable Machine Tool Model
Research on Ram Thermal Deformation Real-Time Compensation of Large Floor Type Boring-Milling Machine
A New 2D NC System of Thermal Cutting Machine
The Structural Design and Analysis of the Rock Hob Test-Bed
Analysis on the Impact of the Error Mapping for Structural Parameters of Parallel Machine Tool
CAD/CAE/CAM
Study on the Thermal Contact Zone in the Surface Grinding
Study on High-Speed Drilling of SUS304 Based on FEA
Surface Roughness Prediction in Turning of Free Machining Steel 1215 by Artificial Neural Network
The Process Strategies of Mould High-Speed Machining and their Applications in the Environment of PowerMILL
Simulation for Sinusoidal Spindle Speed Variation Cutting in Time Domain Based on Simulink
3D Finite Element Simulation on the Orthogonal Cutting Processes with Different Commercial Codes
Vibration Analysis on Ball End Milling Hardened Mould Assembled with Different Hardness Materials
Finite Element Analysis and Calculation of Load Capacity on Aerostatic Thrust Bearing
Cutter/Work Interference and Surface Generation in Ball End Milling
High Speed Machining: A Review from a Viewpoint of Chip Formation
Robotic High Speed Machining of Aluminum Alloys
The Numerical Simulation of the Aluminum Alloy Processing
Thermal Analysis of High Speed Built-In Spindle by Finite Element Method
Modal Analysis of Externally Pressurized Air Bearing Workbench Based on Spring-Mass System Method
The Establishment of Dynamic Model and Stability Research on High-Speed Precision Hard Turning
Large NC Machining Fast Knife Mould Based on Image Technology
Finite Element Simulation of Heavy Cutting Process
Cutting Parameters Optimization of the Matching of Lengthened Shrink-Fit Holder and Cutter in High Speed Milling
Fault Diagnosis of Pump Based on a Hybrid HMM/SVM Model
Study on the Machinability Characteristics of Superalloy K424 during High Speed Turning
Analysis and Research of the Vibration of the High-Speed Cutting Process
An Experimental Study on the Impact on Vari-Speed Milling to the Capacity Machine Tool
Process Information Parameterization of Camshaft Part for Virtual High-Speed Grinding
3D Simulation and Analysis for Face Precision Milling of Aerospace Aluminum Alloy
The Application of Fuzzy Comprehensive Evaluation to Cutting Sequences' Optimization of Multi-Feature Part
Research on Comprehensive Quality Evaluation System for Computer Supported Cooperative Design of Mould
Design and Simulation of Ground Test Platform for Microsatellite Docking Mechanism
Application of Continuous Wavelet Features and Multi-Class Sphere SVM to Chatter Prediction
Modeling and Predicting Cutting Force in Precision Hard Turning
Process Simulation and Process Parameter Optimization of Large Automobile Cover Die Hard Milling
The Impeller Five-Axis NC Machining Simulation Based on UG NX 7.5
Vibration Modeling and Analysis of Large Thin-Walled Cylinder Workpiece in Turning Ring Groove of Inner Hole
UG-Based Parametric Design of Copy Milling Cutters
Curve Construction for Virtual Hand Modeling and Manipulation
Study on CAD/CAM Software System of Machining Spatial Curved Surface by WEDM
Establishing of Constitutive Equation of ZGMn13 Steel and Cutting Simulation Test
Numerical Investigation on Particle Velocity in Cold Spraying of Hydroxyapatite Coating
Military Vehicle Start-Up Process Simulation and Analysis Based on Matlab
Study on Unicursal Pseudo-Random Tool Path for Computer Controlled Polishing
The Development of Micro Abrasive Waterjet Machining Technology
Simulation of Drilling on the Copper of PCB with Ultra-High-Speed
Optimization Design Based on Static and Dynamic Performance of Beam
「Nielsen BookData」 より
