New and advanced materials : selected, peer reviewed papers from the International Conference on Manufacturing Science and Engineering (ICMSE 2011), April 9-11, 2011, Guilin, P.R. China
Author(s)
Bibliographic Information
New and advanced materials : selected, peer reviewed papers from the International Conference on Manufacturing Science and Engineering (ICMSE 2011), April 9-11, 2011, Guilin, P.R. China
（Advanced materials research, v. 197-198）
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
This work surveys the latest advances in, and applications of, biomaterials, new functional materials, hydrogen and fuel-cell science, engineering and technology, environmental catalysis and environment-friendly materials, new energy materials, polymeric materials, mechanical behavior and fracture, thin films, etc. It not only offers a broad overview of the latest advances, but also provides a valuable summary, and references, for researchers in this field.
Table of Contents
Sponsors, Committees and Preface
Chapter 1: Biomaterials
The Study of Automatic Programming System for Near-Field Electrospinning Direct Write
The Corrosion Resistance Properties and Precipitate of Common Artificial Reef Materials
Color Stability of Heat-Treated Okan Sapwood during Artificial Weathering
Effect of Crystals Size, Surface Area and Pore Size of Hydroxyapatite Microspheres on the Loading Ability of Bovine Serum Albumin
Synthesis and Characterization of a Novel Biodegradable Polymer with Fluorescence Property
Effects of Gamma Irradiation on the Structure and Mechanical Properties of Wild Silkworms and Bombyx Mori Silk Fibroin Films
Effects of Nb Content on Young's Modulus and Tensile Property of Ti-30Ta Alloy for Biomedical Applications
Study on Reforger and Biology Mechanics of Individual Femur
Application of Macro-micro Dual-drive System in Micro-EDM
Griseofulvin Solid Lipid Nanoparticles Based on Microemulsion Technique
Biocatalytic Regioselective Oxidation of N-Hydroxyethyl Glucamine for Synthesis of Miglitol
Compressive Properties of Hot-Rolled Mg-Zr-Ca Alloys for Biomedical Applications
Studying on Preperation and Emulsifying Properties of Silk Protein Calcium Salt Made from Waste Silk
Synthesis and Characterization of an Aminated D-Glucose and its Stability of Cu2+Complex
Design for Experiment Device for Abrasive Flow Machining Based on Pro/E and ANSYA
The Effects of Calcium Fluoride Addition on Crystallization Characteristics of Hydroxyapatite-Zirconia Composite
Some Characteristics to the Related Food Processing for Garlic Fructan
Fractal Analysis of the Ortho-Cortex and Para-Cortex of Wool Fiber
Effects of Heat Treatment on some Physical Properties of Douglas Fir (Pseudotsuga Menziesii) Wood
Solution Conformation of Konjac Glucomannan Single Helix
Biomorphic SnO2/C Ceramics Derived from Bio-Templates
Studies on the Graft Copolymer of 2,3-Glycidyl Trimethyl Ammonium Chloride onto Chitosan with Ultrasonic
Optimization of Tool Parameters in Polishing of Aspheric Optics
Preparation and Characterization of Surface-Modified -Tricalcium Phosphate/Ploy(L-Lactide) Biocomposites
Evaluation of Native and Pregelatinized Arrowroot (Maranta Arundinacea) Starches as Disintegrant in Tablet Formulation
Removal of Cr(VI) from Aqueous Solution by Acid Treated Fungal Biomass
Self-Assembly and Characterization of TiO2/PS Complex Particle and TiO2 Hollow Spheres
Study on the Rice Straw Pretreated with NaOH for Biogasification
The Impact of Different Dosage of Additives on the UF Resin Used in Plywood
Calcium Phosphate Cement Modified with Sodium Citrate for Bone Repair
Surface and Porous Characteristics of Spray Dried Hydroxyapatite Microspheres
Crystallization Characteristics and Microstructure of Yttria-Stabilized Zirconia / Hydroxyapatite Composite
A Knitted Scaffold for Tendon Engineering Using Poly (Lactic Acid) Fibers
Multifunctional Y203:Yb3+/Tm3+/Li+ Nanocrystals with Enhanced Near-Infrared to Near-Infrared Upconversion Photoluminescence
Synthesis and Bioactivity of 2-((5-Mercapto-1, 3, 4 -Oxadiazol-2-Yl) Methyl) Benzo[d] Isothiazol -3(2H)-One as Potential Microbiocide
Mechanical Properties and Crystalline Morphology of Blends of Poly(3-Hydroxybutyrate-Co-4-Hydroxybutyrate) with Poly(L-Lactide)
Preparation Technology of Zn-Peptide Complex and Its Effects on Growth Performance and Immunity of Oreochromis Niloticus
Study on the Formation of Wood Zone Line Pattern Induced by the Fungi
Preparation and Property of Bamboo Fiber via Cracking Open- Bamboo
Effects of Ca2+ Concentration on Calcium Carbonate Crystallization in Egg White Protein Solution
The Design of Two-Way Control System of Master-Slave Medical Robot and its Digital Operation Experiment Research
Blood Compatibility of TiO2-xNx Thin Films Prepared by Improved Ultrasonic Spray Pyrolysis
Research on Grinding Characteristics of Ultrasonic Aided Grinding
Effect of Carburization Process on Adhesion Strength of Ti Carbide Layer on Titanium Alloy Substrate
Encapsulation of Glycoprotein Extracted from Kiwifruit in Chitosan-Based Microspheres
Research on Ultrasonic-Assisted Extraction Flavonoids of Medlar (Lycium Chinense Miller)
Fixed-Bed Column Study for Zn (II) Removal from Solution Using Raw Rice Husk
Development of Ligand Incorporated Chitosan Nanoparticles for the Selective Delivery of 5-Fluorouracil to Colon
The Preparation and Characteristics on Chitosan Nano-Carrier with Different Concentration of TPP
Chapter 2: New Functional Materials
Modification Research of Nonwoven Ultra-Thin Absorbing Cores Used in Disposable Sanitary Products
Synthesis and Characterization of PVA/MMT Porous Nanocomposite Prepared by Directional Freeze-Drying Method
Electrochemical Behaviour of Ce Doped Ta2O5 Film Electrode
Analysis and Design of a Cylindrical MR Valve
Study on Preparation and Properties of Mesoporous Magnetic Silica
The Effect of Organic Compounds on the Crystal Structure of Zinc Hydroxystannate
Biomimetic Synthesis of Zinc Hydroxystannate-Coated Calcium Carbonate and its Application in PVC
Photocatalytic Activity of W Doped Ta2O5 Particles for Methylene Blue Degradation under UV-Light
Microwave Dielectric Properties and Microstructures of RETiNbO6 (RE=La, Sm and Y)
Organic Nano-Sized Pigment Based on Bis(4-(N-(9,9-Diethyl-2- Fluorenyl)Phenylamino)Phenyl)Fumaronitrile as Highly Efficient Red Fluorescence
Influence of Sintering Temperature on the Electrical Properties of (La, Ta)-Doped TiO2 Capacitor-Varistor Ceramics
Effects of Dy3+/ Eu2+ Molar Ration on SrAl2O4:Eu2+,Dy3+Long Persistence Phosphors by Microwave Plasma Synthesisd Method
Dielectric Properties of Zn-Doped CCTO Ceramics by Sol-Gel Method
Surface Morphology and Shape Analysis of Nonlinear Optical Crystal DAST
Dielectric Properties of La, Sm Ion-Doped BZT-Based Ceramics
The Comparison of Magnetic Leakage of Different Teeth Structures in Magnetic Fluid Seal
The long Afterglow and Thermoluminescence Properties of MAl2O4 Eu2+, Dy3+(M=Ca, Sr and Ba) Phosphors Syntheized by Combustion Technique
Studies on BaO-CeO2-TiO2 Microwave Dielectric Ceramics
A Novel Ceramic Thermocouple Used in High-Temperature Measurement
The Effect of B2O3-Li2CO3 Addition on Sintering Behavior and Dielectric Properties of Ba 0.6Sr0.4TiO3 Ceramics
A Self-Adaptive Fan Clutch for Automobile
Adhesion and Electrical Properties of Copper Nitride Films
Preparation of N Doped ZnO Films by Magnetron Sputtering
Influence of Random Disorders on Anti-Plane Waveguiding Modes in a Two-Dimensional Phononic Crystal
The Surface Morphology and Mechanical Behavior Studies of DAST Crystal on (001) and (110) Faces
Preparation and Stabilization of High Conductivity Zn-Coated Tetra-Needle-Like ZnO Whiskers
Synthesis of the Hybrid Containing Two Organic Components Based on CuBr2
Effect of Pre-Deformation and Ageing on Compressive Behavior of Ti-58.25wt%Ni Alloys at Room Temperature
Effect of Organic Bentonite on Rheological Properties of Paper Coating
Formation and Performance of Cerium Silane Mixture Conversion Coatings on AZ91 Magnesium Alloy
The Change of Amount and Twists Effect to Electrical Performance of Carbon-Coated Filaments
Effect of Thickness and Length of Ion Polymer Metal Composites (IPMC) on its Actuation Properties
The Microwave Electromagnetic Properties of Sr2+ Doped DyFeO3
Preparation, Characterization of Silicone Succinate Ester and its Application in Leather Industry
A Fast Synthesis and Sintering of Mg2Si1 xSnx (0 x 1.0) Solid Solutions by Microwave Irradiation
Syntheses and Properties of an Unsymmetrical Photochromic Diarylethene with a Methoxy Group
Preparation of Yttria with Elongated Grains and Micro-Pores
Study on the Composite Strengthening Effect of Talc and Kyanite Addition on Corundum-Mullite Based Ceramic Foam
Effect of Forming Pressure and Sintering Temperature on Thermal Expansion Property of Li2O-Al2O3-P2O5-SiO2 Glass-Ceramics
Influence of Thickness and Density of Nonwoven Sound-Absorbing Material on the Sound-Absorption Capability
Study of Manufacturing Battery-Grade Co3O4 of Sphere-Shape
Synthesis and Property of a New Photochromic Diarylethene Bearing Thiophene and a Six-Membered Aryl Unit
Synthesis, Photochromism and Application of a Novel Diarylethene Bearing a Thiazole Unit
Synthesis and Characterization of Multiferroic NiFe2O4/BiFeO3 Nanocomposites by Modified Pechini Method
Research on Profile Shock-Cushioning Performance of Foamed Aluminum-Polyurethane Composite Material
Growth of Tl-2212 Films on CeO2-Buffered Sapphire Substrates
Synthesis and Characterization of Novel Ester Functionalized Chiral Ionic Liquids
A Novel Chelating Resin, Polystyrene-Supported Glucosamine: Preparation and Adsorption Properties for Ag( )
Preparation, Characterization and Infrared Emissivity Properties of Cu / Polyurethane Composite
First-Principles Calculations on Structural, Electronic, and Optical Properties of 2H-CuAlO2
Preparation of a Novel Night Vision Imaging System Filter for Display Applications
Synthesis and Catalytic Study of Magnetic Separable Catalyst: M(Salen)-Functionalized Fe3O4 Polymer Composite Materials (M = Ru(III), Cu(II), Fe(III))
Superconductivity in SmFeAsO0.8F 0.2 Synthesized by High Pressure High Temperature Treatment
Characteristics of Intergrown Superlattice Bismuth-Layered-Structure Ferroelectrics Thin Films Prepared by Sol-Gel Method
Effect of Trace RE on Corrosion Behavior of Ag-Cu-Ni Alloys
Research on the Superhydrophobic Modification of Polyvinylidene Fluoride Membrane
Foamed Metal Materials Preparation Technology
Efficient, Synthesis, Photochromism Properties of a Hybrid Diarylethene
Study of the Electrochemical Properties of H-LiMnBO3 Compound
Electroless Plating of Silver on Microorganism Cells
Effect of Structure Modification on the Microwave Absorbing Performance of Carbon Foams
The Effect of Lubricant on Tribological Properties of Carbonyl Iron-Based Magnetorheological Fluids
Band Gap Property of Three-Component one-Dimensional Quasiperiodic Phononic Crystals
Effect of CuO-Bi2O3 Co-Doping on Microwave Dielectric Properties of Ba4Sm9.33Ti18O54 Ceramics
A More Exact Model for Predicting the Deflection of a Clamped Magnetostrictive Film-Substrate System
Effect of Doping Concentration on the up-Conversion Luminescent Properties of Y2O2S:Yb, Tm Phosphors
Facile Graft Copolymerization of Chitosan Powder with Methyl Acrylate Using Ceric Ammonium Nitrate
Structural, Electronic and Optical Properties of High ( )-Li2BeSiO4: First-Principles Calculations
Study on the Chemical Modification of the Walls of Carbon Nanotubes by K2Cr2O7 and HNO3
Morphological and Electrical Property of Viscose Fiber Coated with Polypyrrole
Preparation of N-Doped SiC Whisker by Combustion Synthesis
Preparation and Properties of Form-Stable Phase Change Materials Polyacrylonitrile Fiber / Stearic Acid Blends
Microstructure and Dielectric Properties of Strontium Bismuth Niobium Ceramics Prepared by Molten Salt Method
Effects of Polyvinyl Pyrrolidone on Electromagnetic Properties of Hexagonal Ferrite Prepared by the Sol-Gel Method
Research on Some Novel Trigonal Schiff Base Compounds With Aromatic Core and Different Substituted Groups
Electrolytic Preparation of Stannous Methanesulfonate Using Uniform Design Method
Synthesis and Characterization of Some Functional Luminol Derivatives with Aromatic Substituted Groups
Sintering and Electrical Properties of Ce0.8Sm0.2O1.9 Solid Electrolyte Modified by Addition of MnO2
Study on in-Situ Preparation and Growth Mechanism of TiCxN1-x Whiskers
Synthesis and Characterization of Some Functional Schiff Base Derivatives with Azobenzene Substituted Groups
Synthesis and Characterization of Binuclear Indium( ) Complexes with Bis-Schiff Bases Derived from Benzidine or its Derivatives
Fire Retardant Cellulose Characterized by Thermal Degradation Behavior
Chapter 3: Hydrogen and Fuel Cell Science, Engineering & Technology
Fractal of Grain Distribution in Mini-Sintering Sinter
Hydrogen Embrittlement of Low Carbon HSLA Steel during Slow Strain Rate Test
Effects of Electrode Structure on Mass Transfer and Performance of PEM Fuel Cell
Characteristics Distribution in PEM Fuel Cell
Influence of Grain Size on Mechanical Properties in a Fe-9Ni-12Mn-2.5Si-1.0C TWIP Steel
Fractal Characters of Micro-Pores in the Sinter
Reduced Graphene Sheets as Catalysts for Oxygen Reduction Reaction in Alkaline Media
Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3 Perovskite Cathode
Study and Application on Crystallization Temperature of Mould Powder for High-Speed Continuous Casting
The Spectrum Characteristic Analysis on Double-Layer Kewitte Latticed Shell
Effect of Hydrogen Addition on Combustion Characteristics of a Spark Ignition Engine Fueled With Low Heat Value Gas
' Phase Precipitation in a Cold Rolled Cu-Zn Alloy under Electric Current Pulses
Estimation of Hydrogen Diffusivity in Austenitic Stainless Steels by Microhardness Gradient Technique
First-Principles Study of Hydrogen Molecules Adsorbed on Al-Doped BN Sheets
The Fault Analysis and Diagnosis of Proton Exchange Membrane Fuel Cell Stack
Catalytic Reforming of Model Tar Compounds from Hot Coke Oven Gas over Pd Promoted Ni/Mg(Al)O Catalysts
Thermodynamic Analysis of Fuel Processor for Fuel Cell Vehicles
Proton Exchange Membrane Fuel Cell(PEMFC) Lumped Modeling and Dynamic Performance Analysis
Comparison of Two Different Rolling Processes on Microstructure and Properties of Ferrite-Bainite Dual-Phase Pipeline Steels
Integration Study of Micro Reformer and High Temperature PEM Fuel Cell
Dynamic-Instability Mechanism of Double-Layer Spherical Shell under Harmonic Loading
Chemical Degradation of the Silicone Rubber in Simulated PEMFC Environments
Mg-Ni-H Hydrogen Storage System Prepared by Controlled Hydriding Combustion Synthesis
Chromium Nitrided A283-C Steel as Bipolar Plate for PEMFC
Development of Direct Quenching Process for SPV490Q Steel Plate
Chapter 4: Environmental Catalysis and Environmental Friendly Material
Synthesis of N-Butyl Propionate Catalyzed by Multi-Walled Carbon Nanotubes Loaded Cerous Sulfate
Preparation and Characterization of Expanded Graphite with ZnO Composites
Photocatalytic Degradation of Ammonia Nitrogen in Aquaculture Wastewater by Using Nano-TiO2
Study on the Photocatalytic Degradation of Diesel Pollutants in Seawater by a Stannum- Doped Nanometer Titania
Preparation and Visible-Light Photocatalytic Activity of TiO2 Nanotubes from a Hydrothermal Method
Calcination Temperature Influence on the Microstructure and the Photocatalytic Properties of TiO2 Pillared Rectorite
Photocatalytic Degradation of Methylene Blue by Modiflyed TiO2 under Visible Light
Preparation and Characterization of Potassium Ferrate
Preparation and Characterization of Expanded Graphite with TiO2 Composites
Investigation of the Performance of V-W Based Catalysts at Low Temperature for NOx Reduction with NH3
Preparation and Characterization of Bimetal and Nitrogen Co-Modified Titanium with Visible-Light Activity
Design and Optimization by Design-Expert Software for Carbon Cycle Mico-Electrolysis Reactor Treatment of the Phenol Wastewater
Formation of Ketoacids in Filtered River Water with Synthetic Goethite-catalyzed Ozonation
Effects of Activators on Compressive Strength of Fly Ash-Based Geopolymers
Photodegradation of Gaseous Toluene by the CdS/TiO2/ACFs Composites under Daylight Irradiation
Study on Style of Multi-Component Bamboo Blended Knitted Fabric
Hydrothermal Synthesis and Characterization of Phosphor Doped Tetragonal Zirconia Nanocrystallites
Post-Doping of ZnO with Cu and its Effect on their Photocatalytic Production of Active Oxygen Species
The Preparation of the Magnetically Separated Cu Doped TiO2 by Coating-Calcining Method
A New Kind of United Treatment Technology of "Three Wastes" from Paper Mill and Flue Gas from Boiler
The Research of a New Purifying Agent on Synthesis and Performance
The Stability and Regeneration Mechanism of New Visible-Light Responsive Photocatalyst Bi20TiO32
Preparation and Catalytic Performance of Ce-Y-Palygorskite Catalysts for NO Decomposition
Effect of the Apparent Porosity of Porcelain Architectural Vitrified Tile on the Far-Infrared Property
Study on Bleaching of the Starch Glycoside Surfactant
Synergistic Effect of Eu3+ and Sm3+ Co-Doping on Photocatalytic Activity of TiO2 Nanoparticles
Phytoplankton Community Characteristic and it's Environmental Indication in the Luanhe-Beidaihe Estuary
Preparation of A Spherical Cellulose Adsorbent as Amino Acid Sorbent
Synthesis and Characterization of Super-Molecular Ionic Liquids
Experimental Study on Mechanical Properties of Hybrid Fiber Reinforced Full Lightweight Aggregate Concrete
Experimental Study on Shrinkage of Wet-Sieving Fine Aggregate Concrete Made from Ordinary Concrete
Influence of Ag Doping on the Crystal Structure and Photocatalytic Activity of FeVO4
Characterization and Photocatalytic Activity of FeVO4 Photocatalysts Synthesized via a Surfactant-Assisted Sol-Gel Method
Technology Optimization Study on Preparation of Activated Carbon from Rice Husk Cracking
Preparation, Characterization and Photocatalysis Properties of Ultrafine Perovskite-Type LaCoO3
Photocatalytic Oxidation Removal of Gaseous Benzene over TiO2 /ACF Composite Photocatalyst Prepared by Screen-Printed Technology
Preparation and Antibacterial Ability of Silver-Loaded Maifanite
Preservative Characteristics of Bamboo Treated by Camphor Leaves Extract
Palladium-Based Catalyst without Interlayer Film Prepared by Electroless Plating for Catalytic Combustion of Toluene
Pollution Assessment of Luanhe-Beidaihe Estuary by Eutrophication Index and Biodiversity Index
Catalytic Hydrogenation of Nitrate Ions over Pd-Cu/ZSM-5 Catalyst
Durability of Bittern-Resisting Cement in High Concentration Brine
Synthesis of a Supported Amorphous Ni-B /TiO2-Al2O3 Alloy Catalyst by Electroless Plating
Effect of Geotextile and Prefabricated Vertical Drains Used in Soft Soil Foundation
Character of the Lateral Displacement of Soft Soil Foundation under Embankment
Effects of SiO2/Al2O3 Ratio on Physicochemical Properties and Catalytic Performance of the Non-Templated ZSM-5 Zeolite
Photocatalytic Degradation of Methylene Blue on MoS2/TiO2 Nanocomposite
Influence and Mechanism of Different pH Values of Extractant on the Leachability of Heavy Metals in Industrial Sewage Sludge
Experimental Study on Expansive Soil Improved with Cation Modifier
Experimental Study on the Solidification/Stabilization of Textile Dyeing Sludge
Changes in the Bacterial Community Structure under Different DO Concentrations with New Method for Nitrate Removal
A Study on Mechanical Performance and Mechanism of Cement Asphalt Mortar
A Simple New Way to Prepare Cu-Doped Nano-TiO2 with Visible Light Photocatalytic Activity
Experiments and Study on Proportioning Design of SMA-13 Warm Mix Asphalt
A Novel Route to Prepare ZnO-SnO2 Nanocomposite with High Photocatalytic Activity
Synthesis, Physicochemical Properties and Catalytic Performance of a Modified ZSM-5 Molecular Sieve
Chapter 5: New Energy Materials
Synthesis of LiFePO4 Cathode Materials by a Chemical Method
Supercapacitor Electrode Materials Based on Activated Carbon /Polyaniline Doped with Nickel Salt
Studies on the Catalyzing Transesterification of Soybean Oil with Methanol for Biodiesel Using a Novel Porous CaO Microsphere Catalyst
Research on the Properties of the Thermal Storage and Corrosion of Al-Si-Cu-Mg-Zn Alloy
Facile Synthesis and High Activity of Novel Ag/TiO2-NTs Composites for Hydrazine Oxidation
Study on Modification Mechanism of Antimony in Al-Si Cast Alloys
Study on the Micro-Structure of High Temperature Oxide Scales Applied Loads on Cr5Mo Alloy
Synthesis and Electrochemistry Characteristics of Layered Li[Li(1/3-x)Mn(2/3-x)NixCox]O2 (x = 0.1, 0.15, 0.2, 0.22, 0.25) Cathode Materials for Lithium Secondary Batteries
Zr-Catalyzed Hydrogen Chemisorptions on an Al Surface
The Impact Properties of a Polyurethane Composite Filled with Clay
Texture and Microstructural Evolution under Electric Current Pulses in a Fe-3%Si Steel
Thermoelectric Properties of Directionally Solidified Bi2Te3 Alloys under High Thermal Gradient
Novel Co3O4/Carbon Nanofiber Composite Electrode with High Li-Storage Capacity for Lithium Ion Batteries
Study on Preparation and Application of a Novel Composite Phase Change Material
Electrochemical Performance of Lithium Difluoro(Oxalate)Borate Synthesized by a Novel Method
Effect of Solution Treatment and Extrusion on the Microstructure and Mechanical Properties of a Mg-2Gd-Nd-0.4Zn-0.3Zr Alloy
Effect of Tin on Microstructure and Electrochemistrical Properties of Mg-Al-Sn-Zn Magnesium Alloys Anodic Materials
Effect of Doping Ions on Electrochemical Properties of LiFePO4 Cathode
Microwave Assisted Carbothermal Reduction Synthesis of Nano-Sized LiFePO4/C
Fabrication of the Effective Counter Electrode for Dye-Sensitized Solar Cells
Chapter 6: Polymeric Materials
Study on PLA/PBS Blends
Study on the Inclusion Behavior of Cucurbit [n] uril with Phenylalanine
Synthesis and Electrochemical Properties of Y-Doped SnO2/C Composite Materials for Lithium-Ion Battery
Preparation and Research of KGM/Starch Composite Films
The Effect of Intumescent Flame Retardant Contained Microencapsulated Red Phosphorus on the Flame Retardance and Thermal Degradation Behaviour of Epoxy Resin
Preparation and Mechanical Properties of Polyurethane/Modified Kaolin Foam Composites
The Creep and Relaxation of Viscoelastic Polymer
Impact of Inorganic Salts on Degradation of Azo Dye Using Fe (III)-Modified PAN Fiber Complex as Heterogeneous Fenton Catalyst
Tribological Performance of PTFE Composites Filled with Spherical-Graphite
Preparation and Characterization of Metheylphenyl Silicone Oil for Buffer Clay
Cotton Fabrics Loaded with Low-Temperature Prepared SiO2/TiO2 Mixing Sols for Photocatalytic Degradation of Organic Dye
New Waterborne Polyurethane Dispersions from the Soybean-Oil-Based Polyols by Ring Opening of ESO with Glycol
Effect of Sodium Periodate Selective Oxidation on Crystallinity of Cotton Cellulose
Synthesis, Characterization and Dynamic Mechanical Property of PU Elastomers with Cross-Linked Hard Segments
Study the Impact of Roasting Temperature on the Ceramic Corundum (SG) Abrasives
Formulation and Evaluation of Isosorbide Dinitrate Acrylic Matrix Transdermal Patches
Synthesis and Electroluminescent Properties of Fluorene-Based Three-Component Red Light-Emitting Copolymers
Ferrocene Containing Hyperbranched Polyester: Structure and Catalytic Performance for Thermal Decomposition of Ammonium Perchlorate
Characterization and Physical Properties of Chitosan Modified Bamboo Pulp Fiber Fabric
Effect of Soft Finishing on the Wearability of Fabric
Properties Analysis of Organic Montmorillonite (OMMT) Reinforced Polybutadiene Styrene Rubber (SBR) Composites
Influence of Polyphenylene Sulfide on Plasticization and Toughening of Polyarylene Ether Nitrile/Polyphenylene Sulfide Blends
Preparation of Lignosulfonate-Chitosan Polyelectrolyte Complex
Direct Preparation of Activated Carbon from Coal and its Electrochemical Properties for Electric Double Layer Capacitor
Influence of Be and Ni to Cu-Al Alloy Shape Memory Performance
Dynamic Viscoelasticity of Poly(ether Ester) Containing Zinc
Influencing Factors of Modified PVDF Grafted onto a Blended PAMPS(PVDF-G-PAMPS) Membrane
Synthesis of Cationic Starch of High DS Using Metal Sodium in Place of Sodium Hydroxide
Effect of Heat-Setting Temperature on the Structure and Performance of Ultra-Fine Denier PET Full Drawing Yarn
Dihydroxypropyl-Terminated Polysiloxane Modified UV Cure Water-Borne Polyurethane
Synthesis and Electrochemical Performance of Amorphous Nickel Hydroxide Codoped with Fe3+ and PO43-
Study on Morphology and Mechanical Properties of Polyaspartic Esters Based Polyureas
Novel Polyaspartic Ester Polyureas Based on Flexible Polyaspartic Ester
Bismaleimide (BMI) Resin Modified by PEEK Bearing Pendant Reactive Propenyl Groups
Characterization and Properties of Cellulose Oleate
Structure and Properties of Konjac Glucomannan Solved in Alcohol/Water
Effect of Aging Precipitation on Properties of Cu-Ni-Si-Mg Alloy
Structure and Morphology of PVDF-G-PAMPS Membrane
Self-Assembled Perovskite Epitaxial Multiferroic BiFeO3 Nanoislands
Synthesis of Thermotropic Polyurethanes Containing Biphenylnate and Imide Units and their Mesophase Behavior
Micro Plastic Part Fabrication Using Custom Made Vertical Injection Molding Machine
Flame Retardant Epoxy Resins Containing Microcapsules
Statistical Analysis of Micro-Crack Parameters for PPy-Coated Fiber Strain Sensors Applicable for Large Deformation
AC Impedance Spectroscopy Studies on Zn-Bi-Co-Mn-Ti System Low-Voltage Varistor Ceramics
Chapter 7: Mechanical Behavior & Fracture
Preparation and Property of Pyrotechnical Battery
Analysis of Slip-Band on Specimen Surface of Polycrystalline Copper under Tension
A New FEM for Torsion Cracked Cylinder Based on Crack3D FEA Code and Mushhelisvili Torsion Theorem
Crystallographic Constitutive Models for Single Crystal Superalloys
Model and Imitation of the Cycle Temperature Fields and Deformations of Coke Drum
Fatigue Behavior Analysis of Cruciform Welded Joints by Infrared Thermographic Method
Short Crack Propagation Law and Fatigue Life Prediction Method for Structural Alloy Steel
Study on the Difference of the Propagation Characteristics between Open Flaws and close Flaws in Brittle Materials under Compressive Loading
Research on the Key Parameter of the Core Part on the Equipment for Peeling Off the Gingko's Shell
Failure Analysis of the Guide Pillar in a Progressive Die
Experimental Investigation of Dilatancy-Bulking Behavior of Weak Sandstone
Study on Stress-Strain Behaviour of Mud Stone from Triaxial Test
Experimental Analysis on Acoustic Emission of The Fracture Marble Under High Tempreture
Investigation into Shear Experiment on Interface between Asphalt Pavement and Concrete Bridge Deck
Hydrogen Embrittlement Susceptivity of Hot-Dip Galvanized Steel in Wet-Dry Cyclic Simulated Marine Atmospheric Environment
Thermal Analysis Method for Studying the Effects of a Series of Stannates on Flame Retardancy of Wood by Thermogravimetry-Mass Spectrometry
Threshold Stress Intensity Factor (Kth) in Inertial Effect Coefficient Model
Pulse Discharge Strengthening of 16Mn Welded Joint and Mechanical Performance
Experimental Analysis and Theoretical Research of Electro-Mechanical Characterization of Piezoelectric Stack Actuators
Fatigue Crack Initiation Life Prediction of Backup Roll of Four High Mill
Sandstone Unloading Rheological Test and Model Parameters Study
Influences of CA Mortar Elastic Modulus on Stress and Deformation of Slab Track in High Speed Railway
Study on Oil Quality Evaluation System and its Implementation Based on Multi-Information Fusion
Wear Mechanisms of PCBN Cutting Tools in Hard and Dry Cutting GCr15 Bearing Steel
Characterization and Simulation of Mechanical Behavior of 6063 Aluminum Alloy Thin-Walled Tubes
Numerical Simulation for Thermal Shock Resistance of Thermal Protection Materials under Temperature Rising
Design and Compare of the Three Cabin Air Fiber Filter Testing Methods for Removal of PM2.5
Investigation on Microstructure and Impact Properties of Borated Stainless Steel for High Density Storage Racks
Heat-Treated Microstructure and Mechanical Properties of TC4 Alloy
Determination of Hardening Coefficient of Large Strain Constitutive Model Based on Torsion Tests
Dynamic Mechanical Behavior of Fiber Reinforced Polymer Composites Embedded with ZnO Whiskers
Effect of Gd and Y on the Low Cycle Fatigue Properties of AZ91D-0.4Ca-0.3Sr
Quasi-Hamilton Principle of Quasi-Crystals Beam.
Preparation of Porous ZrO2-Al2O3 Composite Ceramic with High Strength and Good Corrosion-Resistance
Effect of Potentials on Stress Corrosion Cracking of X80 Pipeline Steel in Simulated Soil Solution
Improving Brazeability of AA3003+Zn Brazing Aluminum Sheets by Final Annealing
The Effects and Criterion of Cl- on the Moisture Regain and Bittern Accumulation of Magnesite Products
An Analytical Solution for Anisotropic Composite Plate of Crack under Bending and Twisting
Influences of Annealing and Deformation on the High Temperature Internal Friction Spectra of Al-0.013%Wt Ce Alloy
PVP Stabilized Ruthenium (0) Nanorods as Effective Catalysts in Hydrogen Generation from the Hydrolysis of Sodium Borohydride
Study on Antioxidant Activity of Proanthocyanidins from Peanut Skin
Preparation and Characterization of MCM-22 Zeolite by Varying-Temperature Hydrothermal Synthesis
The Effect of Poisson's Ratio on the Contact Traction Distribution of a Functionally Graded Coating
Effects of Temperature and Crack Tip Constraint on Cleavage Fracture Toughness in the Weld Thermal Simulated X80 Pipeline Steels
Calculation Error Analysis on the Strain Fatigue Life Predication Formula of Manson-Coffinn and Damage Stain Model
Fracture Analysis for Pitman Shaft of Automotive Steering Gear
Interlaminar Shear Property of Z-Pins Reinforced Woven Ceramic Matrix Composites
Finite Element Analysis of Crack Propagation and Casing Failure Process under Thermal Mechanical Coupling
Effect of Sulphite Sediment on Hydrogen Embrittlement Susceptivity of Hot-Dip Galvanized Steel Exposed to Simulated Marine Atmosphere
Experimental Analysis of an Instrumented Charpy Impact Using Signal Processing Approach
Observations on the Correlation between Statistics of some Fatigue Crack Growth Data and Applied Loads for 2024-T351
Fatigue Damage Assessment of the Engine Mount Bracket Using a Statistical Based Approach
Fuzzy Comprehensive Analysis on the Heat and Moisture Comfort Properties of the Natural Bamboo Fabric
Study on Fracture Toughness Prediction of Non Power Law Hardening Material by Using Local Approach
Investigation of Fracture Mechanism of Casing-Drilling Steels
Cyclic Mechanical Properties of 16MnR Welded Joint under Constant
Study on Deformation Resistance of Bi-Based Superconducting Composite Tapes
Fatigue Properties of Casting TC4 Alloys Treated by Hot Isostatic Pressing
Research of Cement Stabilized Secondary Recycling Materials
Dynamic Mechanical Property of a Steel
Study on Bauschinger Effect in X80 Steel under Axial Loading and Bending
Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures
The Effect of Acrylic Bone Cement Solidification Conditions on the Compressive Property
Numerical Simulation on Effect of Lateral Pressure Coefficient on Stress Distribution around Circular Roadway
The Equivalence Method of Protective Structures
The Research of Warmth Retention Property of Non-Woven Wadding
Dynamic Propagation of Mode Interfacial Crack Subjected to Variable Moving Concentrated Loads
Computational Modeling of Surface Fracture of Polyethylene Acetabular Cup in Total Artificial Hip Replacement
Effect of HCO3Concentration on CO2 Corrosion for Q235 Steel
Dynamic Propagation Problems on Symmetrical Mode Interface Crack
Chapter 8: Thin Films
Preparation and Gas-Sensing Property of Coppertetra-Iso-Propoxyphthalocyanine Spin-Coating Film
Effect of Sputtering Power on the Properties of Transparent Conducting Ti-Al Co-Doped Zine Oxide Films Prepared by DC Magnetron Sputtering
Study of Centerline Segregation in Alloy Tool Steel on CSP Technology
Chapter 9: Other Related Topics
Development of Industrial Ethernet Windows Driver for Motion Control System
Influence of Metal Electrode(Ag,Au,Pt) on the Dielectric and Electrical Properties of HfTaO Capacitors
Effects of Different Thermal Treatment on Optical Properties and Microstructure of ZnO Thin Films
Mechanisms and Effects of Extraction Time on the Leachability of Heavy Metals in Sewage Sludge from Guangzhou
Performance Analysis of High Speed Floating Ring Hybrid Bearing in the Laminar and Turbulent Regimes
Synthesis and Ferroelectric Properties of Sol-Gel Derived Intergrowth-Superlattice-Structured SrBi4Ti4O15-Bi4Ti3O12 Thin Films
Failure Analysis of Thermocouple Thimble
by "Nielsen BookData"
