Optical, electronic materials and applications : selected, peer reviewed papers from the International Conference on Optical, Electronic Materials and Applications 2011 (OEMA2011), March 4-6, 2011, Chongqing, China
Author(s)
Bibliographic Information
Optical, electronic materials and applications : selected, peer reviewed papers from the International Conference on Optical, Electronic Materials and Applications 2011 (OEMA2011), March 4-6, 2011, Chongqing, China
(Advanced materials research, v. 216)
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
Tokyo Institute of Technology Ookayama Library
Part 1A25118/216400039283,
Part 2A25118/216400039291 -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The aim of this special volume is to facilitate the exchange of information on best practice for Photonics Materials and Devices, Optical Materials and Devices, NEMS/MEMS Materials and Devices, Electronic Materials and Instruments, Modeling, Simulation and Applications, etc. It will provide an opportunity for engineers and scientists in academia, industry and government to address the most innovative research and development ideas, together with their technical challenges, social and economic issues, and to discuss the ideas, results, work-in-progress and experience in all aspects of optical and electronic materials and their applications.
Table of Contents
Committees
Reviewers
Preface
Band Structures and Optical Properties of CBOB Crystal Material Based on First-Principles Study
The Design of the Heterotypic Antenna Array of the Smart Antenna with the LMS Algorithm
Research on Folding Ripple in Shaftless Reform of Printing Machine
Color Locating of Ce3+ and Eu2+ Doped Calcium Magnesium Chlorosilicate UV-LED Phosphors
Numerical Simulation and Optimal Design of a Novel Actuator Made of the Orthotropic Piezoelectric Composite Material
Opcm Transducer and a Novel Standing-Surface-Acoustic-Wave Sensor
Research on Video Information Acquisition Module of OV7620
Synthesis of Three Novel Aromatic Biazomethine Liquid- Crystalline Epoxy Resins and Curing Reaction with Aromatic Diamine
Research on the Identification for a Nonlinear System
Study on the Application of Computer Synchronous Control in Lift-Slab Construction for Steel Frame Structures
Dynamics of a Higher Order Rational Difference Equation
Sensitivity Analysis of CFST Frame Sidesway Based on Correlation
Design of Control and Display System of Infrared Cooker Based on TMP86FH09ANG and CY8C21534
The Research of AD-HOC Network Bandwidth Control Distribution Mechanism
Study on the Multiple Voltage Source Inverter for Grid-Connected Large-Scale Wind Energy Conversion System
Multi-Agent Reinforcement Learning Based on K-Means Clustering in Multi-Robot Cooperative Systems
Three-Photon Excitation Used in Fluorescence Lifetime Imaging Technology
Finite Element Analysis of Interfacial Stress for Fiber Reinforced Composite Cable Wire Based on FBG
Attached FBG Strain Sensor Based on Thermal Stress Mechanism
The Simulation Analysis of Semi-Active Suspension System in Vehicle Based on Sliding Mode Control with Varying Structure
An Improved Genetic Algorithm Based on hJ1 Subdivision and Fixed Point
Thermal Performance Evaluation and Economic Analysis of LED Integrated with Thermoelectric Cooler Package
The Map-Reduce Parallelism Framework for Task Scheduling in Grid Computing
RFID Anti-Collision Algorithm Merging Security Mechanism
A Lightweight RFID Mechanism Design
Dielectric Property of Barium-Bearing Glasses Based on Thai Resources Doped with Nd3+
Thermal Performances Analysis of Microelectronic Chip Cooling System with Thermoelectric Components
Effect of Single or Double Calcination on LiMn2O4 Prepared by a Solution Combustion Synthesis
Nanostructured Material with Localized Magnetic Enhanced
Analysis of Output Characteristic for Fiber Bragg Gratings Laser
Contribution of Strain and Elasto-Optical Effect to Resonant Mode in the Two-Dimensional Photonic Crystals Force Sensor
Support Vector Machine Optimization Based on Bacterial Foraging Algorithm and Applied in Fault Diagnosis
Qualitative Properties of Vibration about Nonhomogeneous Circular Membrane with Axisymmetrical Mass
Drive System Design and Characteristic Curve-Fitting of Intelligent Motor Test System
A Model of Threshold Voltage in FinFET
The Application of Genetic Algorithm in Layout Design of Oil Rig Driller Console
An Energy Efficient Estimation Algorithm for Wireless Sensor Network
Application of Two-Component Pressure Sensitive Paint in Transonic Wind Tunnel
Three-Dimensional Temperature Field Numerical Simulation of Twin-Arc High-Speed Submerged Arc Welding Process Based on ANSYS
Prediction Model of Twin-Arc High Speed Submerged Arc Weld Shape Based on Improved BP Neural Network
Digital Integrated Monitoring System of Mine Hoist Based on ARM
Research on Acoustic Emission Model of Rotor Crack Propagation
AE Signal of early Rotor Cracks Fault Diagnosis Based on PWVD and SVM
Welding Residual Stress's Numerical Simulation and Relieving of Guyed Mast Earplate Joint Substructure
Fault Diagnosis Method Based on Supervised Manifold Learning and SVM
Subpixel Edge Detection of Autofocus for Micro-Machine Vision System
Design and Realization Real-time Edge Detection System Based on DM642
Reconstruction of the Flow Cross-Section Temperature Based on the Radiation Balance Between Infinitesimal
Application of ANN in Preparing Technology of Magnesium Matrix Composites
Inverse Kinematics Solution for a 6R Special Configuration Manipulators Based on Screw Theory
Mathematical Model for the Effect of Dynamic Parameter Posed on Free Floating Space Manipulator's Kinematic Accuracy
Simulation of IP Fragmentation and Defragmentation on Linux with User Space Application
Hydrogen Dilution Influence on the SIC Films Optical and Micro-Structural Properties as the Window Layer of P-i-n Solar Cell
A Systematic Study of Solution Aging Time Impact on Surface Morphology of Sol-Gel Derived ZnO Thin Films
Current Formulas of Silicon-Glass Anodic Bonding
Band Gaps of Two-Dimensional Square-Lattice Photonic Crystal with Button-Shaped Dielectric Rods
Design of a Weight Detection System for NI ELVIS II Based on LabVIEW
An Improved Image Encryption Algorithm Based on a New Two-Dimensional Map
A Security Method for Multi-Sensor Fused Image
Incremental Regressive Learning Algorithm of Support Vector Machine and its Application
Effects of Argon-Oxygen Ratio and Sputtering Power on Optical Properties of ZnO:Al Thin Films Fabricated by RF Magnetron Sputtering
Crystal Growth, Optical Spectra and Thermal Properties of Na2Ni(SO4)2*4H2O Crystal
A New Modeling on Information Transmission of Weak Electrical Signals in the Nutrition Growth of Plant
Electrochemical Transient Behaviors of Tubular Steel in Buffered Acidic Solution Dissolved with Hydrogen Sulfide and Carbon Dioxide
Orthogonal Polarization Spectral Imaging in Microcirculation
The Propagation Losses of Cold Deposited Zinc Sulfide Waveguides
Applying Template Method Pattern to Developing Electrochemical Workstation
Electronic Structure, Effective Masses and Optical Properties of Monoclinic HfO2 from First-Principles Calculations
Research on Milling Spiral Bevel Gear Using C Machine Tool
Signal Processing Technique of Fluorescence Lifetime Imaging Using Four-Dimension Time Correlated Single Photon Counting Method
Research on the Photoelectric Conversion Efficiency of Grating Anti-Reflective Layer Solar Cells
Realization of Wireless Communication Card Based on UWB for Industrial Internet of Things
A Delay Optimization of Non-Periodic Information for the Scheduling Algorithm
Dependence of Transient Current and Capacitance of Organic Light-Emitting Diodes on Pulsed Bias Conditions
Research on Relationship between Residual Stress of Hole Cold Expansion and Process Parameter
Stochastic Excitation Model of Strip Rolling Mill
A Study on Orthogonal Experiments of YAG: Ce3+ Yellow Phosphor for White LED
Forecast and Processing of Weak Electrical Signals in Clivia miniata by RBF Neural Networks
Numerical Investigations of Young's Modulus for Composites with Inclined Glass Fiber for Wind Energy Application
Effects of Vanadium Microalloying on Hardness of Alloy ZG270-500
Electronic Structures of Donor-Acceptor-Donor Trimer Codopants in Silicon
Applications of Y2O2S: Eu+Fe2O3 Materials in Fluorescence Fiber System
The Analysis and Research on Digital Holography Signal Based on Wavelet Theory
Laser Cladding of a Ramp Thin Wall with a Variable
Laser Cladding of Micro-Fluidic Channel Mold
Nanolayered CrN/TiAIN Coatings Synthesized by Ion Plating Technology for Tribological Application on Piston Rings
Novel Remanufacturing Technology as an Alternative to Maintenance for Diesel Engine and its Benefit Analysis
ForCES-Based Firewall with Stateful Packet Inspection
Luminescence Dynamics and Structural Investigation of InGaN/GaN Multiple Quantum Well Light Emitting Diodes
Effect of Aggregate Size and Gradation on the Ceramsite Sound-Absorbing Materials
The Timber Supply Chain Risks Assessment Based on Weighing with Rough Set and Fuzzy Comprehensive Assessment
Study on Microstructure and Mechanical Behavior of Magnetorheological Fluids with Mixed Particles
Conventional Plasticity Constitutive Model for Shape Memory Alloys
Synthesis of Phosphazene Flame Retardant and its Application in Epoxy Molding Compound for Large-Scale Integrated Circuit Packaging
Effect of Equilibrium Moisture Contents on Insulating Performance of Autoclaved Aerated Concrete Blocks
Application of Over-Sample Policy and Rotated Angle Invariability of Radial Sampling Points in the Isaf Reconstruction Algorithm
Cooperative Work & Cooperative Efficiency Evaluation of Automotive Industry Chain Based on Collaborative Commerce Platform
Study on an Improved Integration Architecture of the Collaborative Sales Management System Based on Auto-Industry
Synthesis, Photoluminescence and Energy Transfer of Two Novel Tb(III) Ternary Complexes
Attack and Improvement of the Secure Password Authentication Protocol in Wireless Networks
A Simple Password-Based Authenticated Key Agreement Protocol
Fabrication and Characterization of MgAl2O4 Thin Films by Sol-Gel Method
Effect of Annealing Treatments on Mg(Zr0.05Ti0.95)O3 Thin Films by Sol-Gel Method
A Demodulation Scheme for High-Sensitivity Temperature Sensing Based on Long Period Fiber Grating
The Finite Element Analysis Based on ANSYS- Magnetorheological Elastomer Isolator
Integrated Non Reciprocal Ring Resonators
Research on Rope-Less Hoist System Driven by PMLSM
Optical and Electrical Character of SICGe/SIC Heterojunction Phototransistor with Charge Compensation Layer
Weak Signal Detection in Underwater Acoustic Based on Time-Series Characteristic
Supercontinuum Generation with Dual-Wavelengthpumping in an All-Fiber Device
The Semantic Model of Manufacturing Services
Effect of Er2O3on the Microstructure and Electrical Properties of (Er, Ta)-Doped Tio2 Capacitor-Varistor Ceramics
Research on Dependable Architecture of Saas Based Platform Supporting the Industry Chain Coordination
An Epon Dynamic Bandwidth Allocation Algorithm Based on the Least Mean Square Prediction
Densification of TiCN Matrix Cermets by Microwave Sintering
Analysis on the Failure Mechanism of Un-Connecting Rod Engine Gear Assembly
Modeling the Thermal Deformation of the Volume Bragg Grating in High-Power Beam Combining System
Texturing of Multi-Crystalline Silicon Wafers Through Ionized Bubble for Solar Cell Fabrication
Solar Cell Fabrication by Wet Etching Combined with Ultrasonic Vibration for Multicrystalline Silicon
Analysis on Spatial Pattern of Urban Heat Island and Impervious Surface Using Linear Spectral Mixture Analysis
A Virtual Experiment Platform Based on Matlab Webserver
Studies on Security Communications of Embedded Devices
The Deployment of Core Infrastructure for Middle and Large Scaled Industry
Mobile Wireless Sensor Networks K-Covering Algorithm
The Research of Data Gathering Protocol for Mobile Sensor Networks
The Simulation of Aspheric Lensed Fiber Based on ABCD Matrix
Dielectric and Hot/Wet Properties of Methyl-Silsesquioxane/Cyanate Ester Resin Hybrid Materials
Preparation and Dielectric Properties of POSS-NH2/Cyanate Ester Resin Organic-Inorganic Hybrids
Detector Afterpulsing Suppression by Fluorescence Lifetime Correlation Spectroscopy Method
Microfluidic Device for Fluorescence Immunoassays by Using Porous Matrix
Soft Magnetic Material (NiFe2O4) Particles Synthesized by Solvent Co-Precipitation Method
Optimal Design of Tunable Optical Add-Drop Multiplexer in Silicon-on-Insulator
A Planar Lightwave Circuit Based on Optical Add-Drop Multiplexer with 16 Tunable Wavelength Channels
Effect of Resistance Spot Welding Parameters on the Austenitic Stainless Steel 304 Grade by Using 23 Factorial Design
An Improved Range-Based Time Synchronization Protocol in WSN
Path Planning Methods of Mobile Robot Based on Soft Computing Technique
Admissible Analysis and Synthesis of Markovian Jump Linear Descriptor Systems
Optimization of Cr12MoV Steel Boronizing Technology
Modeling and Simulation of Direct Force Control for PMLSM
Stochastic Stability of Hot Strip Rolling Mill Rolls
Analysis of Geometrical Non-Full-Similar Scale Model Based on Similarity Theorem
Research and Implementation of Image Rotation Based on CUDA
Micro-Thermoelectric-Generator Design and Analysis Based on Catalytic Combustion of Hydrogen
Simulation of Methanol Steam Reforming Heated by Waste Heat for Hydrogen Production in a Microreactor
Growth and Characterization of Self-Assembled Boron Carbon Nitride Needle-Like Nanostructures
Design of Electronic Data Management System in Web-Based CAD Environment
The Method of Fault Feature Extraction from Acoustic Emission Signals Using Wigner-Ville Distribution
Research on Large Scale Data Set Processing Based on SVM
A Novel English Teaching Model Based on Web Environment
A Novel Heuristic PageRank Algorithm in Web Search
A Parallel Data Mining Method Based on Complex Network
A Novel Marketing Strategy Based on Information Technology
An Experimental and Analytical Vibration Study of a Thin Cylindrical Shell Treated with Constrained Layer Damping
Media Access Control Protocols in Multimedia Wireless Sensor Networks: A Survey
Theoretical Analysis of Young's Modulus for Unidirectional Fiber Reinforced Composites with Different Fiber Orientations
Chaotic Dynamics in Duffing System with Two External Forcings
Primary Resonance and Bifurcations in Damped and Driven Duffing-Van der Pol System
Radiative Transitions and Optical Behaviors in Tm3+ Doped Mixed Alkali/Alkaline-Earth Modified Heavy-Metal Gallate Glasses
Research on Magnet Excitation and Image Processing Used in Visual Detection
Process Analysis for Rapid Tooling Technology Based on Rapid Prototyping
Discussion on Construction of OCDMA PON Address Code-(F,K,2) Optical Orthogonal Codes
The Top-Stem-Cutter for the Top-Cutter Machine Design and Fem Analysis
The Cause and Treatment Strategy on Thrashing
by "Nielsen BookData"