Materials science and engineering applications : selected, peer reviewed papers from the 2011 International Conference on Materials Science and Engineering Applications (ICMSEA 2011), January 15-16, 2011, Xi'an, China
Author(s)
Bibliographic Information
Materials science and engineering applications : selected, peer reviewed papers from the 2011 International Conference on Materials Science and Engineering Applications (ICMSEA 2011), January 15-16, 2011, Xi'an, China
（Advanced materials research, v. 160-162）
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
"The proceeding provides an international medium for the publication of theoretical and experimental studies related to the load-bearing capacity of materials as influenced by their basic properties, processing history, and micro-structure and operating environment" --preface
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Materials science is an interdisciplinary field which involves the study of the properties of matter and the exploitation of those properties in various areas of science and engineering. It investigates the relationship between the structure of a material at the atomic or molecular scale and its resultant macroscopic properties. This three-volume set provided an international forum for the publication of theoretical and experimental studies related to the load-bearing capacity of materials, as influenced by their basic properties, processing history, microstructure and operating environment.
Table of Contents
Preface
SiC/Si - MoSi2 /MoSi2 Oxidation Protective Coating for Carbon Material at 1700 DegreesC
Preparation and Properties of Modified PolyGram Nano-Microencapsulated Phase Change Materials
Chiral Recognizable Properties of Thermosensitive Poly(NIPA-co-NALPE) Hydrogels
Production, Purification and SOD-Like Activity of Methanobactin from M. trichosporium 3011
Optimization Design of Microwave Absorbing Composites Containing Activated Carbon Fibers
Investigation of Surface Deflection Controlling in Cylinder Shallow Shell Forming
Tribological Properties of Cu Based Friction Composites with In Situ Synthesized TiC Filler
Construction of Discarded Refrigerator Recycling System Based on Reverse Logistics in Harbin
Effect of Additives on Characteristics of Poly(3-Hydroxybutyrate) Microspheres
Characterization on Propylene Oxide Polymerization with In Situ FT-IR
Effect of Fiber Lay-Up Direction Misalignment on the Natural Frequency of Composite Laminates
Failure Factor Research of Composite Laminates Containing Holes Based on MSC.Nastran
The Effect of Different Solvent on the Microstructure of Gibbsite during Hydrothermal Treatment
Strength Analysis of Composite Laminates with Non-Penetrating Damage Repaired by Two Kinds of Bonding Methods
Natural Vibration Analysis of Composite Laminates with Non-Penetrating Damage Repaired by Two Kinds of Bonding Methods
The Role of NADH in the PHB Synthesis Mechanism in Methanotroph
Feasibility Study of the Stability Evaluation of GT Propellant with Methyl Violet Test Burst Time
Microstructure and Tribological Properties of a Ni-Base Laser Cladding on Aluminum Bronze
Experimental and Numerical Investigation into Dynamic Spall Damage of Porous Phenolic Composites
Experimental Research on the Optimal Operation Mode of Integrated Oxidation Ditch with Continuous Flow and Intermittent Aeration
Strontium Hydroxyapatite Synthesis, Characterization and Cell Cytotoxicity
Forming Response of Ultra High Strength Steel Sheet to Stamping Speed during Hot Forming
Heavy Metal's Potential Harm for Environment of Ancient Pyrometallurgical Slag
Composite Material of Concrete Meso-Failure Test
Chemical Bond and Property of TiB2/Cu Composite and Doped Series
Carbon Fiber Cloth in Structural Engineering Application
Numerical Simulation of Fiuid Field of Molten Steel in the Mold on 700mmx700mm Billet Continuous Caster
Research on Friction and Wear Properties of Annealed 5052 Al-Mg Alloy
Experimental Investigation on Adsorptive Removal of Phenolic Compounds from Aqueous Solution by Cr-Bentonite
Growth of a Methane-Utilizing Mixed Culture HD6T on Methanol and Poly- -Hydroxybutyrate Biosynthesis
Microstructures and Wear Properties of Micro-Nanostructure Coating on Cast Iron Rolls by Electro-Spark Deposition
Competitive Adsorption of Fluoride and Phosphate on MgAl-Co3 Layered Double Hydroxides
Effect of Compound Modification on Structure of Hypereutectic Al-Si Alloy
Influence of Bias Voltage on the Structural Properties and Adhesive Performance of ZnO Thin Films Deposited by Cathodic Vacuum Arc Deposition on Polyimide Foil Substrates
The Effect of Heat Treatment Technology on Nonlinear Constitutive Relationship of Metallic Rubber
Boundary Conditions for Axisymmetric Circular Cylinder of Cubic Quasicrystal
Research on the Influence Parameter of Thermal Fatigue of the Composites Material SiCp/A356 Used on Brake Disc
The Study of High-Voltage Insulation Space-Components Applying Resin Composites Modeling Technology
Numerical Simulation of Welding for Vice-Frame Components
A New Pair of Cumulative Fatigue Damage Models for Composite Materials
The Strength of Vacuum-Free Diffusion Bonding Joints of Ni-Bi Alloys and ZrO2 Ceramic
Influences and Mechanisms of Ordinary Portland Cement on Properties of Asphalt Emulsion Composites
Surface Yield Strength Gradient versus Residual Stress Relaxation of 7075 Aluminum Alloy
Improving Life Cycle Human Toxicity Assessment in Pre-Training Electrolytic Aluminum Industry for Polycyclic Aromatic Hydrocarbons
Thermoluminescence Spectra of Lithium Tetraborate Single Crystal
Study of Deformation and Breakage Characters in Coal Seam Floor under the Condition of Mining
Tensile Ductility of Ultra-Fine Grained Copper at High Strain Rate
A New Building Energy-Saving Material of XH Self-Insulation Block
The Development and Summer Test of a New Ceiling Radiant Cooling Panel
Numerical Simulation of Campus Wind Environment
The Numerical Simulation and Analysis of New Metal Cold Condole Radiation Panel
Application and Analysis Chilling Ceiling Combined with Displacement Ventilation System in Office Buildings
Numerical Simulation of Two-Dimensional Turbulent in T-Tube Tee about Two Kinds of Angle
Preparation of Nanometer Al (OH)3 Powder Using Coal Gangue by Polyacrylamide Dispersant-Carbonization Method
Process of Ni-P Electroless Deposition on SiCp/Al Composites from Acid Bath
Calculation of Nature Frequency for Ship's Tail Shaft Flexural Vibration Based on Genetic Algorithm
Microstructure and Mechanical Properties of High Strength Hot-Rolled TRIP Steel Containing Vanadium
Study on Thermal Oxidation of Asphalt Fractions by In Situ FTIR Analysis
Non-Thermal Plasma Assisted Catalytic Oxidation NO over Mn-Co-Ox Catalysts at Low-Temperature
In Situ Synthesis of ZrN(ZrO2)/Si2N2O Composite Materials from Zircon by Carbothermal Reduction-Nitridation Process
Microstructure and Electrical Properties of Nd2O3-Doped TiO2-Ta2O5-Based Capacitor-Varistor Ceramics
The Study of Effects of Temperature on Contact Strengths of Thick-Walled Cellular Solids
Effects of Silane Coupling Agent Treatment on Properties of PMN/EP Composites
Corrosion Behavior of Cold-Spray Aluminum Coating in Marine Environment
Effect of Chemical Composition on Secondary Hardening of WD1 Steel Used for Warm Work Dies
Environmental and Uncertainty Assessment: Hazardous Industry Waste as Aggregate in Cement Production
Fabrication of Super-Hydrophobic Surface on Aluminum Alloy by a Simple Immersion Method
Comparative Study on Four Different Methods for Measuring the Dynamic Modulus of Elasticity of Acer Mono Wood
Static Finite Element Analysis of Container Flooring and Chassis Combinations
Design Allowable for Durability Analysis of Advanced Composites
Effects of Nano-Particles on Resistance of DOP Migration from Flexible PVC
Effect of Ammonia Etching on Catalyst Nanoparticles Formation for Growth of Aligned Carbon Nanotubes
Effects of Heat Treatment on the Morphology of Primary Phase and Hardness of B-Refined Al-7 wt% Si Alloy
Fabrication of Single-Negative Metamaterials Based on Coplanar Waveguide
Fabrication and Characterization of a Feldspar-Alumina for Dental Ceramic
Preparation of Three Different Sphere-Like Au/CeO2 Catalysts and their Activity for the CO Oxidation
Microstructural Evolution in Void Coalescence Induced by Plate-Impact Loading in Ultrapure Aluminum
Module Partition Research for the Marine Drilling Rig
Research on Stamping Forming and Spring-Back of Automotive Panel
Laser Cladding of Zr55Al10Ni5Cu30/SiC Amorphous Composite Coatings on AZ91D Magnesium Alloy for Improvement of Wear Resistance
Preparation and Characterization of Cu Nano-Powders by Hydrothermal Decomposition and Hydrogen Reduction Process
Preparation and Characterization of Ni90Ag10 Composite Nano-Powders by Chemical Co-Precipitation Hydrogen Reducing
Research on a Navigating Hierarchy Model of Aircraft Manufacturing Supply Chain
Effects of Cooling Rate on Morphology, Microhardness and Volume Fraction of Mg-Zn-Y Quasicrystals
Three Critical Technologies of Simulation Analysis on Thermal-Loads of the Radome in Flight
Corrosion Resistance of Ternary Ni-Cu-P Coatings Prepared by Electroless Method on Carbon Steel
Synthesis and Microwave Electromagnetic Property of Nano-Sized Mn0.5Zn0.5Fe2O4 Spinel-Type Ferrite
Effect of TSCR Process on Cold Rolling Texture of Fe-3% Silicon Steels
Research on Hot Forging Process of C-Grade Steel Train Wheel by FEM
Mechanical Performance of Reactive Powder Concrete for Structure Engineering
Numerical Solution of Bending Problem of a FGM Cantilever Beam with Large Deformation
Experimental Investigation of Heat Transfer Enhancement of the Heat Pipe Using CuO-Water Nanofluid
Study of Synthesis and Properties of Spinel LiNi0.4Mn1.5Cr0.1O4 as Cathode for Lithium Ion Batteries
Progress in the Preparation of Composites Based on the Nonmetallic Fractions Recycled from Waste Printed Circuit Boards
Characterization of Fluorinated H Zeolite with NH4F
Synthesis and Characterization of Cu(II), Zn(II) Dendritic Metal Complexes
Heat Transfer Model of Roller Quench in Strip Continuous Heat Treatment Process
Study on Variation Rule of Pore Pressure on CPTU Model Test
Concrete Structure System Based on Stay in Place Formwork
LiMn2O4 Powders Prepared by Solution Combustion Synthesis in Ethanol and Water Systems
A New Concept for Material Fragmentation Simulation - Nodes Separation
Product Improvement Design Method Facing Modularization Disassembly
Warm Tension Flow Stress Model of DP Steel LTWB Based on KS Function
Ab Initio Study on Ta:SnO2
Insecticidal Effects of the Insecticide Based on Porous Starch and Cinnamon Oil against Sitophilus zeamais
Research on Nitrogen and Phosphorus Losses of Natural Composting Manure in the Northern Region of Erhai Lake
Spectral Investigation of Bolaform Schiff Bases with Barbituric Acid
Fabrication and Properties of Zinc Silicate Phosphors through Solid State Reaction
Experimental Investigation on Dynamic Constitutive Model of Saturated Sandy Pebble Soil
The Lamellar Eutectic Spacing Changes under the High Magnetic Field during the Diffusion of Liquid Al/Solid Cu Process
Supporting Effect and Economic Benefit Analysis on New Type Concrete-Filled Steel Tube Supports
Bearing Capacity of Frame's Column Strengthened with Addition Flange Wall
The Analysis of Fracture Properties of Steel Column Base
Quantum Spectra and Classical Orbits in Nano-Microstructure
Analysis of the Ring-Closing of Chloride Polyether Polyol by the Method of Quantum Chemical Calculating
Transparent Conducting ZnO:Ga Epitaxial Films Prepared on Epi-GaN/Al2O3 (0001) by MOCVD
Fabrication and Mechanical Properties of Wood-PMMA Composite
Study on Characteristic and Compressive Property of Porous NiTi Alloys Fabricated by Thermal Explosion Method
Analysis of Forming Defects and Measures to Prevent Forming Defects of Dn40-Type Control Valve
Influence on Stucture of Layered Double Hydroxides with Different Methods Synthesis
The Study on the Corrosion Resistance for Polyurethane Epoxy Resin Coating of AZ91D Magnesium Alloy
Electrochemical Performance of La0.7Sr0.3Cu1-xFexO3- as Cathode Material in IT-SOFCs
Effect of the Additives on the Catalytic Performance of Iron-Ruthenium Composite Catalyst
Preparation and Properties of Biodegradable Sodium Lignosulfonate/Poly(Vinyl Alcohol) Blend Films
Molecular Dynamics Study of Size Effect on Uniaxial Tension of Single Crystal Cu Nanowires
Microstructure of Rapidly Solidified CuFe10 Alloys
Effect of Rare Earth on 30CrMnSi Steel Investment Castings Cracking
Influence of Segment Design of Shield Tunnel on the Magnitude of Joint Opening
Analysis of Impact on the Wafer Surface Performance of Supercritical CO2 Extraction
Effect of Ni Addition on the Formation and Growth of Intermetallic Compound at Eutectic SnBi/Cu Interface
Application of Different Post-Treatments to Improve the Leaching Resistance of ACQ-D Treated Wood
Stress Distribution in the Vicinity of Thermally Grown Oxide of Thermal Barrier Coatings
Study on Current Imaging of Nugget in RSW Based on Magnetic Field
White Electroluminescence from a Single Fluorene-Based Copolymer
A Welding Method for Carbon Nanotubes
Electrode Classification and Retrieval Using Supported Vector Machine
Model Test Study on Embankment Instability Induced by Rapid Drawdown of Water Level at Yellow River Downstream
Processing and Characterization of Core-Shell PA12/Silica Composites Produced by Selective Laser Sintering
White and Red Electroluminescence from a Single Copolymers of Fluorene and 4-Thienyl-2,1,3-Benzothiadiazole
Anti-Flushing Design for Continuous Circulation System
Fabrication and Characterization of Al2O3/GdAlO3 Eutectic Ceramic In Situ Composite by Laser Zone Remelting
Preparation and Recognition Properties of Andrographolide Molecularly Imprinted Ploymer Microspheres
Design of Dog-Bone-Shaped Ultrasonic Vibrational Fatigue Specimen and its Application in Study on VHCF Behavior of 6063 Aluminium Alloy
Microstructure and Properties of Mold Steel 3Cr2W8V by Electron Beam Surface Alloying
Effects of Rare Earth Elements on the Quality of Nugget in Aluminum Alloy Spot Welding
Suspension Stability and Thermal Conductivity of Oxide Based Nanofluids with Low Volume Concentration
FEM Simulation and Analysis of Variable Parameters for the Three-Roll Cylindrical Bending of Plate Process
Experimental Study on Extraction of Vanadium from Contained Vanadium Solution
Study of Foamed Concrete from Activated Ash/Slag Blended Cement
Study of Parameters and Technics for Chrome-Plating Texturing
Electron Back Scattering Diffraction Analysis of A357 Alloy Modified by Sr
Hot Forming Analysis of Car Door Bar for Ultra High Strength Steel
Kinetics and Thermodynamics Studies on the Decompositions of Phosphogypsum in Different Atmospheres
Numerical Simulation Study on the Cold Rolling of Hollow Thread
Quasi-Static Failure Analysis of Honeycomb Sandwich Beam with Composite Facesheets
Optimum Design of the Launch Vehicle Composite Cross Beam Structure Based on Equivalent Model
Evaluation and Prediction of Dynamic Moisture Comfort Property of Fine Denier Fiber Fabric
First Principles Calculations of Phase Stabilities of MgH2 and Mg7XH16(X=Nb,V,Ti)
Electronic Structure and Bonding Characteristic of LaMgNi4H4
The Distinctive Charm of Coating-Architecture in the Modern Urban Development
Structure and Composition Study of InSb Films Prepared by Radio-Frequency Sputtering
Loading and Unloading Split Hopkinson Tension Bar Technique for Studying Dynamic Microstructure Evolution of Materials
The Case Study on SO2 Emission Factor from Iron and Steel Industry in Yunnan Province
Effects of Cooling Rate on Quasicrystal Microstructures of Mg-Zn-Y Alloys
Experimental Research on Fatigue Behavior of Recycled Aggregate Reinforcement Concrete from Earthquake-Stricken Area
The Damping Energy Dissipation Study on Buckling Restrained Brace in Multilayer Steel Frame
Microstructure and Mechanical Properties of Vacuum Sintered Austenitic Stainless Steel Parts
Experimental Study on the Bending Properties of GFRP Middle Beam in Foundation Pit Support
Study on the Toxicity of Cyanogen-Containing Industrial Waste Residues
Flow Control over a Circular-Cone-Cylinder by Unsteady Plasma Actuations
Study on Main Cable-Shaped of Long-Span Suspension Bridge
Synthesis and Microwave Absorbing Properties of Ni/SiO2 Core/Shell Particles
Magnetic Properties of Fe-Co Films with Tuneable In-Plane Uniaxial Anisotropy Prepared by Electrodeposition
Synthesis and Microwave Absorption Properties of Co2Z Barium Ferrite by Salt-Molten Method
Electromagnetic Properties of Silica-Coated Planar Anisotropy Carbonyl-Iron Particles in Quasimicrowave Band
Growth and Photodegradation Characteristics of Nano-Crystalline Titania Coating Prepared by MAO
Analysis of Electromagnetic Inverse Model of Resistance Spot Welding
The Influence of Surface Barrier to Critical Current of HTSC's
Microwave Reflection Characteristics of the Fe/Al2O3 and Fe3Al/Al2O3 Composites
Research on the Fatigue Damage Characters of the Cement Soil under Dynamic Load
Kinetics of Order-Disorder Transition of Antiphase Domain Boundary Formed between DO22 Phases: Microscopic Phase-Field Study
Damage Distribution of High Purity Aluminum under the Impact Loading
Synthesis of Leaf-Shaped -Fe2O3 Nanoflakes
Preparation and Modification of Magnetite Thin Films by Swift Kr-Ion Irradiation
Experimental Study on Concrete under Uniaxial and Biaxial Compression
Crater Characteristics of Tungsten Spheres Impacting Steel Target
Porous Carbon Prepared by a Template-Like Method Using Non-Porous Pumice Mineral as Template
Performance Study of a Wood Solar Drying Device with Latent Heat Storage System
Experimental Research on Adsorption of Cadmium with Synthetic Tobermorite from Wastewater
Interfacial Coordination and Nanofiber Fabrication of a Tri-Pyridine-Based Derivative with Platinum (II) Ions
Frication and Wear Properties of Cu-Fe-Al Composite Containing Graphite Prepared by Induction Sintering
Research on Impact of Grouting Material on Seismic Performance of Tunnel in Soft Soil
Modified Biopolymer Scaffolds by Co-Axial Electrospinning
Study of Low-Carbon Economy and Low-Carbon Building Materials
Fabrication of Degradable Microsphere/PNIPAAm Hydrogel Combination Systems for Protein Delivery
Shock Enhancement of Aluminum Foam under Impact Loading Using FEM Simulations
Synthesis and Characterization of Sugar-Bearing Chitosan Derivatives as a Scaffold for Nitric Oxide Release
Effect of Hydrogen Bonding Interaction on the Properties of Caprolactam-Modified Casein/Waterborne Polyurenthane Composite
Performance Test of N80 Expandable Casing
Load-Carrying Capacity of Glass Panel on Different Wind Pressure Conditions
Chemical Strengthening of Erbium Phosphate Laser Glass by Ion Exchange
A Preliminary Study of Self-Exciting Mode Oscillating-Flow Heat Pipe Used in the Heat Recovery of Wood Drying
Numerical Simulation of Thermal/Mechanical Coupling in Laser Transmission Microjoining of PET and Titanium
Preparation and Characterization of Polypyrrole/Attapulgite with Organic Surface Modification Conducting Composite
Preparation of Ta-Nb Alloy Powder by Electro-deoxidation of Ta2O5/Nb2O5 Mixture in a CaCl2-NaCl Eutectic Melt
Process Characteristics Study of Organic Wastewater Treated by Two-Phase Anaerobic Biotechnology
Innovative Design of Self-Decelerating Escape Device Based on TRIZ
The Design of Giant Magnetostrictive Flow Valve and its COMSOL Simulation
Generalized Electromagnetic Energy Density in Time-Dependent Composite Media
Research of Technology Parameters on Pipe Axis' Hot Extrusion Based on Numerical Simulation
Effect of Internal Pressure Path on Wall Thickness of AZ91D Pipe with Variable Cross-Section
Ethanol Vapor-Induced Morphology and Structure Change of Silk Fibroin Nanofibers
A Novel Amperometric Immunosensor Based on Thionine/DNA Self-Assembled Multilayers on Carbon Nanotubes Modified Glass Carbon Electrode
Honeycomb Paperboard Pack-Green & Low Carbon Packaging Solution for Home Appliance
Vulcanization Kinetics of Natural Rubber Coagulated by Microorganisms with Use of a Vulcameter
An Assessment of Low-Carbon Efficiency Evaluation in the Prospect of Environmental Optimization
Study of ITO Thin Film Deposited by RF Magnetron Sputter at Low Temperature
Properties of Blue-Stain Masson Pine after Compression and Thermal Modification
Investigation on Ultimate Bearing Capacity of Recycled Aggregate Concrete-Filled Steel Tubular Short Columns under Axial Compressive Load
Permeability Prediction in the Impregnation Stage of Resin Transfer Moulding
Effects of Load Sequence on Fatigue Crack Growth in Pressure Vessels
Ageing Embrittlement of 15Cr1Mo1V Steel Welded Joints Evaluated by Small Punch Test
Hydrogen Dilution Influence on the SiC Films Preparation and Structural Properties as the Window Layer of p-i-n Solar Cell
The Study of Effects of Temperature on Contact Strengths of Thick-Walled Cellular Solids
Modification of Coconut-Shell Activated Carbon and its Controlled Release Property for Nicotinic Acid
Preparation and Characteristic of Urea Formaldehyde Modified with Hexamethoxymethyl Melamine
Probing of Iron Ore "Plus Calcium Oxide Grade"
Calculation for the Acoustic Absorption Coefficient of Multilayered Materials by an Improved Extended Transfer Matrix Method
Study on H2S Corrosion Resistance of L245/825 Lined Steel Pipe Welding Gap
The Stabilization of Central Wavelength of Fiber Bragg Gratings by Thermal Contraction Effect of Kovar Substrate
Oxidation Behavior of Stainless Steel with Electroless Ni-Fe-P Coatings
A Microscopic Study on Local Strain Rate Sensitivity of Polypropylene Syntactic Foam with Microballoons
Preparation, Properties and Cytotoxicity Assessment of Nanosized Pt-Rh Composite Catalyst for the Decomposition of Gaseous Ammonia
Study on the Properties and Cytotoxicity Assessment of Nanostructure Copper-Cerium Model Catalysts Prepared by Coprecipitation Approach
Preparation of Solar-Grade Polysilicon by Acid Leaching
Synthesis and Characterization of Nano Hydroxylapatite by Reaction Precipitation in Impinging Streams
Preparation and Characterization of Polymethacrylimide Foam
Novel Preparation Technology of SBS Modified Asphalt
Preparation Technology and Performance Analysis of Crumb Rubber and SBS Composite Modified Asphalt Binder
Fabrication, Characterization and Adsorptive of Human Fibrinogen of HA/PHBV Nano Composite Films
Influence of Chemical Modification on the Electrical Properties of Si Nanowire Arrays
Mesh Generation for Ellipse Particles of Composite Solid Propellant
Laser Assisted Procedure for Local Thermal Manipulation of Aluminium Alloys
Study on the Matching between Cross-Linked Polymer Microspheres and Nuclear-Pore Membranes
The Magnetic Properties of FeCuNbSiB Flake Particles Prepared by Milling the Annealed Ribbons
Preparation of N-Acetylchitooligosaccharides by Enzymatic Hydrolysis of Chitosans
Preparation of N-Acetyl-D-Glucosamine by Enzymatic Hydrolysis of Amorphous Chitin
Curing Reaction and Kinetic Parameters of Diallyl Orthophthalate Resin with Initiator Dicumyl Peroxide
Preparation of Silica Nanoparticles Using Silica-Rich Filtrate from Potassium-Rich Rock
Research on Mechanism of Electrical Transport of Carbon Aerogels
Characteristic of the High-Strength Magnesium Alloy on Cylinder Upsetting
Low Temperature Floor Radiate Heating System Designed Especially for Large Room Located in Cold Area
The Research of Flexible Solar Cells for Application in Solar Roof
Study on the Thermoconductivity Properties and Mechanism of Boron-Containing Slag
Effects of Polyaniline Doped by Different Acids on Thermal Stability of Epoxy Resin
Studies on Galling Behavior in Square Cup Drawing of High Tensile Strength Steel
Numerical Simulation of Laser Thermal Stress Forming of Thin Steel Sheet
Scale Effect of Vibration Mode of Micro-Beam in MEMS under Electrostatic-Mechanical Coupling
Anisotropic Behavior of Geomaterial under Three-Dimensional Stress States
Frequency-Sensitive Optical Response via Tunable Band Structure in an EIT-Based Layered Medium
Removal Efficiency of Hazardous Material in Cyclohexanone Production Wastewater Applying Anaerobic Upflow Bed Filter
The Construction and Analysis of Eutrophication Model for Caohai of Dianchi Lake
Si Ion Implantation-Induced Defect Photoluminescence in Silica Films
Investigation of Fabrication and Microstructure of the Fe3Al/Al2O3 Composites by Plasma Active Sintering Process
Electroless Ni-P-SiO2 Composite Coatings and their Corrosion Behaviors in Simulated Furnace Flue Gas
Electrochemical Characteristic of Cr-Based Film Coated 304SS as PEMFC Bipolar Plates
On the Nonlinear Viscoelastic Behaviour of the PVC-Coated Fabric
Study of Typical Welded Joint Hot Spot Stress Concentration Factor
Energy Absorption Properties of Folded Honeycomb Structure Consisting of Corrugated Paperboard
Effect of Al and ZrO2 on Sinterability and Mechanical Properties of B4C
Development of a New Damping Material with Oil Resistance and High Temperature Resistance
Microstructural Evolution and Weldability of AISI 4042 Steel
Effect of Hydrogenation on Structural, Optical and Electrical Properties of Amorphous InAsSb Thin Films
The Research of by Blend and Flux Method SrFe12O19 Magnetic Particle Preparation and Magnetic Properties
Wafer Non-Uniformity Analysis during Chemical Mechanical Polishing Based on Finite Element Method
Design of Automatic End-Advanced Hydraulic Support in Coal Face with Deep Dip Angle and Large Mining Height
Coupling Capillary Electrophoresis and Ion Mobility Spectrometry via Electrospray Interface: a Preliminary Study
Development and Calibration of an Optical Magnetic Twisting Cytometry for Studying Nano-Dynamics of Living Cells
Effects of Sputtering Parameters on the Properties of Sputtered ZnO Films
Sequencing the Reconfigurable Assembly Line with a Hybrid Multi-Objective Genetic Algorithm
Process Characteristics Study of Anaerobic Baffled Reactor (ABR)
Environmental Benefits and Energy Efficiency of Superheated Steam as Media in Processing Ultra-Fine Fly Ash Technology
Acute Toxicity Test on Old Smelting Slag
Basic Properties of Woodceramics Made from Furane Resin/Bamboo Powder Composite
Estimation of Whiskers Growth on Sn Coating of Cu-Leads in Different Accelerated Tests
Microstructure in Pressureless-Sintered Iron-Containing Hydroxyapatite/Titanium Composites
Synthesis and Electrochemical Properties of LiFe0.95Ti0.05Po4/(C+LiFeP2O7) Composite Material
Polarized Raman Characterization of (2,2) Carbon Nanotubes Formed inside the Channels of AEL Crystals
Numerical Simulation of Dimensional Variations for Roller Hemming
Effect of La Addition in W Skeleton on Microstructure and Properties of WCu Alloy
Effect of Concentration on Electrospinning Oil Sorptive Fiber
Study on the Print-Through and its Forecasting Model Based on the Color Difference Evaluation
An Experimental Investigation of the Shell-Side Pressure Drop of Enlarged-Hole Whole-Rounded Baffle Heat Exchanger
Analysis and Control Methods of Side Slope Stability
Effect of Wheel/Rail Friction on Rolling Contact Fatigue
Morphology Dependent Luminescence Behaviors of Ba0.75Al11O17.25:Mn2+ Nanophosphors
Study on Removal of NH4+-N by Zero-Valent Iron (ZVI or Fe0) in Advanced Coking Wastewater Treatment
Physical and Electrochemical Properties of LiFePO4/C Cathode Material Prepared from a New Carbon Source
Experimental Studies on Thermal Strain of Aerial Laminated Glasses
Effect of Balanced Fertilization on Phyllostachys heterocycla cv. pubescens Yield, Quality and Mechanical Properties
Effects of Soil NPK on Mechanical Properties of Culm-Wood of Ph. pubescens
Failure Modes of Dual Phase Steels under Different Loading Paths
Modeling and Simulation Analysis of the Twist Drill Conical Grinding Method Based on Pro/E Software
Simulation of Stainless Steel Drilling Mechanism Based on Deform-3D
Investigation of Material Properties of One-Piece Glass Fiber Post-and-Core Affecting Biomechanical Responses of the Restorative System
Research on Crack Property of Concrete Based on Fracture Mechanics
Research on the Temperature Stress Field of Interface End between Asphalt Concrete Overlay and Concrete Pavement
Effect of Soy Protein on Kinetics of Polyurethane Formation
Research on Bearing Capacity of Prestressed Concrete T-Beam at High Temperature in Fire
Characteristics of In-Flight Particles and Splats Thermally Sprayed by Using Conventional and Nano-Composite Cored Wires
Influence of the Cell Wall Thickness of Core on the Dynamic Response of Square Honeycomb Sandwich Plate Subjected to Blast Loading
Cutting Parameter Optimization for Multi-Pass Milling Operations by Genetic Algorithms
Experimental Investigation on Compressive Properties for 3D Four-Directional Braided Composites
Dynamic Models for L-Histidine Fed-Batch Fermentation by Corynebacterium glutamicum
Research on Health Monitor for Three-Dimensional Braided Composite Material Products Condition Based on FBG
Influence of ZrO2 on Oxidation Resistant Properties of Glass-Based Coating on Molybdenum Substrate
Investigation of Square Wave Pulsed Currents on Solidification Behavior of Al-Cu Alloys
Properties of Mullite-Zirconia Composites Prepared through Reaction Sintering Kaolin, -Al2O3, and ZrO2
Particle Tracking Computational Prediction of Hemolysis by Blade of Micro-Axial Blood Pump
Research on Effects of Mo Element on the Magnetic Properties of 1J79 Alloy
Supercapacitor from Nitrogen-Doped Carbon Nanotubes
Research on the Behaviors of the Adsorption of Sulfate Ions onto Cross-Linked Chitosan in Wastewater
Study on the Kinetics of Adsorption of Cadmium by Chitosan
Study on the Preparation of Chitosan-Based Resin
Synthesis of Chitosan Grafted Ternary Polymerization
Theoretical Studies on the Chemical Structure of Carboxymethyl Chitosan
Microstructure and Mechanical Properties of Molybdenum Alloys Doped with ZrB2 Particles
Microstructure and Corrosion Resistance Behavior of Composite Micro-Arc Oxidation and Sio2 Coatings on Magnesium Alloys
Study on Bombardment Energy of Substrate Surface in Sputtering Environment by Langmuir Probe
Chemical Composition and Microstructure of Metal Doped Graphite-Like Carbon Films by Closed Field Unbalanced Magnetron Sputtering
by "Nielsen BookData"
